CHERRY DOLL CHANGING TABLE
WITH BASKETS
MODEL NUMBER:
01867
Assembly Instructions.
Adult Assembly Required.
* Product may vary slightly
from what is shown here.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
Page 1 of 4
1.0/0908/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
TOOLS NEEDED:
Phillips Screwdriver
(power driver is helpful but be careful not to damage the product)
PARTS INCLUDED:
(A) 2 - Side Frames
(B) 2 - Bottom Rails with Grooves
(C) 2- Top Rails
(D) 8 - Long Bolts (not shown)
(E) 1 - Bottom Panel
(F) 1 - Top Panel
(G) 2 - Short Bolts (not shown)
(H) 2 - Baskets
(I) 2 - Basket Bottoms
(J) 1 - Pad
A
C
B
F
E
J
I
H
CARE INSTRUCTIONS:
Wood/MDF parts can be wiped clean with a damp cloth. The fabric parts are poly/cotton. Do not immerse baskets in water. Spot
clean as needed with mild soap and let air dry. Pad can be machine washed but only with cold water, gentle cycle, and air dry.
For longevity of the product, we recommend hand washing the pad.
NOTE:
A WHITE DOLL CHANGING TABLE IS SHOWN IN THE
ASSEMBLY PHOTOS. ALL PARTS AND ASSEMBLY
STEPS ARE THE SAME FOR THE CHERRY MODEL.
Page 3 of 4
1.0/0908/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
C
C
A
A
B
E
B
PICTURE1
PICTURE 2
STEP1: See PICTURE 1.Attach the TWO BOTTOM RAILS (B), with the grooves facing in, and the TWO TOPRAILS (C)
to ONE SIDE FRAME (A) using FOUR LONG BOLTS (D). The countersunk holes on the side frames face out so the heads of
the bolts will be concealed.
STEP2: See PICTURE 2. Slide the BOTTOM PANEL(E) into the grooves on the BOTTOM RAILS (B) with the white side
facing up. Next, attach the second SIDE FRAME (A) to the TWO BOTTOM RAILS (B) and the TWO TOP RAILS (C) using
FOUR LONG BOLTS (D).
STEP3: See PICTURE 3. Position the TOPPANEL(F) and line up the two holes. Secure the top panel to the SIDE FRAMES
(A) using the TWO SHORT BOLTS (G).
STEP 4: See PICTURE 4: Unfold the BASKETS (H) and place the BASKET BOTTOMS (I) inside. Place the baskets on the
bottom panel; and place the PAD (J) onto the top panel.
J
G
F
I
H
I
H
PICTURE 4
PICTURE 3
Page 4 of 4
1.0/0908/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
|