WICKER DOLL BUGGY
Assembly Instructions. Adult Assembly
Required. Save these instructions for future
use. This item is a toy for dolls only.
For children ages (3) years and older.
PRODUCT MODEL
NUMBER:
00569
Actual product may vary slightly from shown.
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
CORPORATE OFFICE: 111 Lions Dr., Suite 220, Barrington, IL 60010
Page 1 of 4
1.0/0407/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The “!” symbol indicates that this step is
easier if you have another person assist you.
STEP 1 - PICTURE 1: Attach the HANDLE (A) to the HANDLE FRAMES (B) using TWO SHORT
SCREWS (C).
! - STEP 2 - PICTURE 2: Decide if you want the handle attached in front of the carriage or behind it (it can
be removed and reattached, by an adult, in the other position at any time).
Attach the TWO HANDLE FRAMES (B) to the WICKER BODY (D) using FOUR LONG BOLTS (E), FOUR
WASHERS (F), and FOUR CAP NUTS (G). The bolts with washers go through the holes inside of the wicker
body, and then secure the parts together on the outside of the body using the cap nuts.
PICTURE 1
PICTURE 2
A
D
B
B
! - STEP 3 - PICTURE 3: Attach the TWO CHASSIS FRAMES (H) to the WICKER BODY (D) using
FOUR LONG BOLTS (E), FOUR WASHERS (F), and FOUR CAP NUTS (G). The bolts with washers go
through the holes inside of the wicker body, and then secure the parts together on the outside of the body using
the cap nuts.
STEP 4 - PICTURE 4: Attach the TWO AXLES (I) to the underside of the CHASSIS FRAMES (H) using
FOUR SHORT BOLTS (J), and FOUR CAP NUTS (G). The bolts go through the bottom, and then secure the
parts together on the top using the cap nuts. The axles face the inside.
PICTURE 3
PICTURE 4
D
I
I
H
H
AXLES FACE
THE INSIDE
Page 3 of 4
1.0/0407/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5 - PICTURE 5: Attach the FOUR WHEELS (K) to the AXLES (I). Squeeze the metal clip on the wheel
to open it, slide the wheel onto the axle, and then release the clip so that it locks over the end of the axle. Gently
tug each wheel to make sure the clip has popped into place and locked onto the axle.
K
K
K
K
PICTURE 5
STEP 6 - PICTURE 6: Dress the FABRIC LINER (L) onto the WICKER
BODY (D). Secure it with the ribbons (slip one or both of the ribbons, as
needed, through holes in the wicker and then tie the ribbons into a bow).
Dress the FABRIC SHEET (M) onto the MATTRESS PAD (N) and place
them inside of the WICKER BODY (D). Your carriage is now assembled!
WARNING !! CHOKING
HAZARD! SMALL PARTS!
Not for children under three
(3) years of age. Please make
sure children know that this
toy is for dolls and stuffed
animals only.
L
D
It is not to be used with real
infants or with pets.
Children should NEVER
attempt to climb inside of
it, sit in it, or stand on it.
PICTURE 6
Regularly check the
hardware to ensure it
remains tight!
Actual product may vary slightly from shown.
Page 4 of 4
1.0/0407/TG
Download from Www.Somanuals.com. All Manuals Search And Download.
|