Specifications
Throat Diameter (1)
Nominal Impedance
Minimum Impedance
Nominal Power Handling (2)
Continuous Power Handling (3)
Sensitivity (1W/1m) (4)
Frequency Range
Recommended Crossover (5)
Voice Coil Diameter
Winding Material
25 mm (1 in)
8 ohm
6.3 ohm
20 W
40 W
107 dB
1.5 -18 kHz
2.5 kHz
25 mm (1 in)
Aluminium
0.1 mH
Inductance
Diaphragm Material
Flux Density
Mylar
1.55 T
Mounting and Shipping Info
Two M5 holes 180° on 76 mm (3
in) diameter
Overall Diameter
Depth
90 mm (3.5 in)
53 mm (2.1 in)
Net Weight (1 unit)
Shipping Weight (8 units)
Shipping Box (8 units)
0.8 kg (1.8 lb)
6.7 kg (14.7 lb)
220x220x150 mm
(8.7x8.7x5.9 in)
1
Driver mounted on B&C ME10 horn
2
2 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance.
3
Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
HF Drivers
40 W continuous program power capacity
1” horn throat diameter
DE10
4
5
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
12 dB/oct. or higher slope high-pass filter.
25 mm (1 in) aluminium voice coil
Mylar diaphragm
1500 – 18000 Hz response
107 dB sensitivity
Download from Www.Somanuals.com. All Manuals Search And Download.
|