| EIR608 Series-5107qsg   Quick Start Guide   LED Chart   3 5 Log into the Switch   o o These instructions are for Web based management.   Refer to the User’s Manual for instructions concerning   console management.   Connect a stand alone PC to a port on the switch.   Change the PC’s network IP Address to allow it to   connect to the switch (ex: 192.168.16.2). Use the   default subnet mask and gateway.   Launch the PC’s web browser and navigate to the   switch by typing the switch’s IP address in the browser   address window.   Navigate the web page by expanding the folders on the   left side of the web page.   Elinx Managed Ethernet Switch   EIR608 Series   LED   Status   Green   Off   Meaning   The Switch is powered on   The Switch is powered off   The Switch is the master of a redundant   ring (X-Ring)   The Switch is not the master of a   redundant ring.   Power Source 1 is available   Power Source 1 is unavailable   Power Source 2 is available   Power source 2 is unavailable   SFP Port is linked   Data is being transmitted or received   Not connected to the network   Connected to the network   Transmitting or receiving   Not connected or operating at 10/100   Operating at 1000M   PWR   Green   Off   R.M   o o Green   Off   Green   Off   Green   Blinking   Off   Green   Blinking   PWR1   PWR2   LINK/ACT   (P7/P8 SFP)   Top   Top   P1-8   Bottom Off   Bottom Green   Items Included   1 o o o o o Ethernet Switch   o Record the switch’s MAC Address. The   Console Cable (RS-232 RJ-45 to DB-9)   CD with Support Manual   This Quick Start Guide   Panel Mount Bracket   4 Hardware Installation   MAC Address is printed on the product label. Provide   the MAC Address to your Network Administrator.   The Network Administrator should provide an IP   Address, Subnet Mask, and Gateway.   2 Default Settings   o Select a mounting location and install with the attached   DIN rail clip or included panel mount kit.   Connect power to the switch   o o o 12 to 48 VDC   Redundant DC input is available with fault   contacts.   o o o o IP Address: 192.168.16.1   Subnet Mask: 255.255.2555.0   Gateway: 192.168.16.254   Username: root Password: root   NOTE: The installation of an SFP Module disables   the associated RJ-45 Port.   International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA   European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland   +353 91 792444 Fax +353 91 792445   Download from Www.Somanuals.com. All Manuals Search And Download.   |