BB Electronics Home Theater Server Vlinx VESR9xx User Manual

Documentation Number pn#8906 VESR9xx-3208qsg rev000  
Quick Start Guide  
6
Setup Vlinx Manager Software  
Open Vlinx Manager: click  
StartÆProgramsÆB&B  
ElectronicsÆVlinxÆVlinx ManagerÆVESR  
Serial Server  
Vlinx VESR9xx Serial Servers  
The Discovery page opens  
3
4
LED Status  
LED  
STATUS  
Ready  
Port 1  
Blinks if system is operating correctly  
On indicates serial port open, blinks when data present on  
serial port  
To configure via the network, select Network.  
If you know the IP address, select The device is  
at this address, and type in the address.If not,  
select I dont know the IP address of the device.  
Click Connect.  
Port 2  
Link  
Same as Port 1  
(Present on 2 port units only)  
On indicates Ethernet operating in 100BaseTX, blinks  
when data present on Ethernet link  
1
Check for All Required Hardware  
Vlinx VESR9xx module  
This Quick Start Guide  
CD with Vlinx Manager s/w and manuals  
Network cable (not included)  
Serial cable(s) (not included)  
OR…Setup the Web Interface  
Open a browser and type the IP address of the  
serial server in the Address Bar.  
Mode Switch  
When the serial server is found, the  
Configuration window appears.  
Hold in Mode switch for…  
Result  
2
0 to 2 seconds  
2 to 10 seconds  
Initiates a Hardware Reset  
Enters Console Mode  
Install the Hardware  
More than 10 seconds  
Resets to Factory Defaults  
Connect a 10 to 48 VDC power supply  
Connect the network cable from the serial server to a  
network drop using a standard network cable.  
VESR92x models are equipped an additional RJ45  
Ethernet port. This port allows you to connect a local  
Ethernet device to the network and functions like an  
Ethernet switch. It does not matter which port is used  
for the network connection and the local connection.  
Connect the serial device(s):  
5
Install Vlinx Manager Software  
Insert the included CD and it should autostart  
Follow the prompts to install the Vlinx Manager  
software.  
Note: Be sure you have administrative rights & disable firewalls  
in Windows XP and Vista.  
o
RS-232 with DB9: straight-through for DCE  
device, null modem for DTE device  
RS-232/422/485 with terminal blocks: see  
Appendix D for pinouts  
o
International Headquarters: 815-433-5100 Fax 433-5104 www.bb-elec.com  
European Headquarters +353 91 792444 Fax +353 91 792445  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Abocom Network Router UA600GS User Manual
ACDelco Portable Generator AC G0004 User Manual
Acer Projector PD523 User Manual
Adaptec Network Card Storage Manager User Manual
Adcom Stereo Amplifier GTP 760 User Manual
ADTRAN Two Way Radio ISU 2X64 User Manual
ADT Security Services Power Supply ADT APS 6R User Manual
Agilent Technologies Printer Accessories 85671A User Manual
Amana Freezer DC68 02032C User Manual
Behringer Stereo System XR12 User Manual