Aztech Systems Modem DSL600EC User Manual

QUICK INSTALLATION GUIDE  
Version 1.0  
Step1 : Hardware Setup  
Package Contents  
1a  
Connect the power adapter to the power socket and the other end to the DC 9V jack of the DSL  
Router. Switch on both POWER adapter and the DSL MODEM.  
1. 1 x DSL600E(C) Ethernet Modem  
2. Quick Installation Guide  
3. User Manual (Found in CD)  
4. Utility CD  
5. 1 x RJ-45 Straight Cable  
6. 1 x Telephone Cable ( RJ-11)  
7. 1x Power Adaptor (9V)  
8. 2 x POTS Splitter  
DSL MODEM  
Power Cable  
Aztech DSL600E(C)  
Ethernet Modem  
DC 9V JACK  
POWER SWITCH  
Power Adapter  
Minimum System Requirements  
- Windows 98SE/ ME/ 2000/ XP  
- MAC 9.x to 10.x  
- 64 MB RAM for Win 98 SE/ ME  
- 128 MB RAM for Win XP/ 2000  
- 64 MB or 128 MB RAM for Mac  
- 4 x CDROM Drive  
1b  
Connect one end of the telephone line to the modem labeled ADSL and the other end to the  
pots splitter labeled MODEM (optional) to connect a physical telephone, use another telephone  
line connect from the telephone to the pots splitter labeled PHONE.  
For Technical Support  
Support Hotline Hours  
Mon-Fri, 9am to 6pm  
(Except public holidays)  
Please contact  
Aztech Systems Ltd  
Tel: 6749-2062  
CONNECT TO WALL SOCKET  
- Ethernet Port (LAN Card)  
POTS  
SPLITTER  
WALL SOCKET  
(OPTIONAL)  
FOR WINDOWS USERS:  
Important  
TELEPHONE  
LINE  
Before you run the utility CD, please make sure that PC’s Network Card TCP/IP  
Properties and the Internet browser proxy is set accordingly. It is also assumed that the  
computer/ notebook has the network card already installed.  
DSL MODEM  
DSL JACK  
TELEPHONE  
(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows the  
user who has a Static IP Address on the network card to access either the DSL Modem configuration  
page or surf web)  
Note:  
2. Settings for Internet Browser Proxy:  
1a. Configure TCP/IP settings for Win 98SE/Me  
The picture illustrates the connection t o a single telephone or fax machine. If you have another telephone  
or fax machine connected to other telephone wall socket (sharing the same line), please attach another  
POTS Splitter to telephone wall socket to prevent DSL signal from getting disconnected while surfing.  
i) Windows Desktop-> right click on Internet Explorer (IE) icon, scroll  
down to select Properties  
i) Windows Desktop -> right click Network Neighborhood  
for Win98SE / Network Places for Win ME -> Properties  
ii) “Internet Properties” window -> click Connections tab -> Select  
Never dial a connection -> click LAN Settings …  
ii) “Network” window -> click the Configuration tab -> scroll down to  
select and double click TCP/IP xxx (xxx refers refers to the model  
of the Ethernet Network Card connected to the DSL600E(C))  
1c Connect one end of the Ethernet cable to the Ethernet port of t he computer and the  
other end to the ETHERNET Port of the DSL Modem.  
iii) “Local Area Network (LAN) Settings window ->remove the tick for  
the option for the Automatic configuration -> remove the tick for the  
option box for Proxy Server -> click OK -> click again to exit from  
“Internet Properties” window  
iii) “TCP/IP Properties” window -> select IP Address tab ->Select  
Obtain an IP address automatically -> click DNS Configuration  
tab -> click Disable DNS -> Click OK  
ADSL MODEM  
ETHERNET  
CABLE  
3. For Singnet Filtering Service User (e.g. Family On-line)  
1b. Configure TCP/IP settings for Windows 2K/XP  
i) Windows Desktop -> right click Internet Explorer (IE) -> click  
Properties  
i) Windows Desktop-> right click on Network Place icon, scroll down  
to select Properties  
ii) “Internet Properties” window -> click Connections tab Select Never  
dial a connection -> click LAN Settings kkdk  
ETHERNET PORT  
ii) “Network & Dial-Up Connection” window -> click Local  
Area Connection -> scroll down to select and double click  
Internet Protocol TCP/IP  
COMPUTER  
iii) Click to put a tick for Automatically detect settings  
iii) “Internet Protocol (TCP/IP) Properties” ->select Obtain an  
IP address automatically -> select Obtain DNS server  
address automatically -> click OK  
iv) Click to put a tick for Use a proxy server for your LAN ...”  
-Type filter.singnet.com.sg in “Address” field ->  
Type 8080 in “Port” -> click Advanced  
-Proxy Settings window - > click to put a tick for Use the  
Same Proxy Server for all protocols”  
-Type 192.168.1.1 in the space provided under  
Exceptions. Click OK to exit Proxy Setting” -> click OK  
to exit LAN Settings” -> click OK again to exit Internet Properties”  
Step2 : Configuring Using Setup Utility  
Step3 : Connect to the Internet  
3C It will show info that the internet connection was  
3a Enter your Username and Password given by the  
2b Setup Wizard will start to check and configure  
FOR WINDOWS 98SE/ME/XP/2000 USERS  
2a  
successfully established. You may click on the  
ISP. Depending on the service where you  
the PC and DSL Router. In event the Wizard  
prompts error, please follow the guide to rectify  
the problem.  
cube to start surfing or click EXIT to exit the utility  
subscribed, you need to include the suffix  
IMPORTANT: Insert the Utility CD into the CD-ROM. The utility  
will auto-run and display the main menu. Select Setup Wizard  
button to proceed.  
“@singnet” or “@singnet1500” or  
“@singnetbusiness” after the username. Click  
CONTINUE to proceed.  
(Note: If doesnt auto-run, then go to the CD-ROM  
drive and execute the Setup.exe)  
FIREWALL REMINDERS:  
If your computer is installed with a firewall, it might prompt that  
the setup launcher is trying to access the internet, just click on  
Allow or Grant Access to proceed with setup. If the firewall  
does not give you the prompt and utility informed you that your  
computer is with a firewall, exit the utility and try disabling the  
firewall rerun the utility CD. Enable the firewall after completing  
the setup.  
3b Upon successful connection to the Internet, it will  
display a summary of the settings, you may save  
or print for future reference. Click CONTINUE to  
proceed  
2c After checking, it will prompt you to enter  
Username and Password to setup the Internet  
Connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3M Air Conditioner 5797A MT User Manual
Acer Computer Monitor UMXV6AAA01 User Manual
Acoustic Research Headphones AW791 User Manual
Advantech Network Card ADAM 4500 User Manual
AeroComm Network Card CL4490 1000 User Manual
American Standard Indoor Furnishings 0456013 User Manual
Atlantis Land Switch A02 G8 User Manual
Avery Printer 676 User Manual
Baby Jogger Bicycle Accessories Bicycle Accessories User Manual
Barco Projector R5976907 00 User Manual