Atlona TV Cables AT HD4 V11OSR User Manual

User Manual  
AtlonA  
HDMI with RS232 and with  
Bi-Directional IR Extenders  
over CAT5/6/7 up to 350ft  
AT-HD4-V110SR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
INTRODUCTION  
The Atlona AT-HD4-V110SR is HDMI with RS232 and Bi-Directional IR Extender Kit over Cat5/6/7, designed on  
HDBaseT technology which allows full 3D and 4Kx2K (4 times the 1080p) up to 350ft.  
The HD4-V110SR is capable of transmitting Ethernet channel from one location to another, perfect for digital  
signage applications.  
PACKAGE CONTENTS:  
• 1 x AT-HD4-V110S (transmitter module)  
• 1 x AT-HD4-V110R (receiving module)  
• 2 x 5v Power supplies (Universal 110/240V)  
• 1 x Set of Wall Mounting Ears  
• 2 x IR Emitter sensor  
• 2 x IR Receiver sensor  
• 1 x Instructions manual  
FEATURES:  
• Transmits HDMI (Digital Video and Audio), RS232 and Bi-Directional IR up to 350ft (100m)  
• Supports Full Uncompressed HD Video  
• Supports high resolution video HD: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz),  
2k (2048x1080p) and 4kx2K (4096x2160p) - 4 times higher than 1080p  
• Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768,  
1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200, 2048x1080p, 4096x2160p - 4 times  
higher than 1080p  
• Full HD and 3D support - all 7 3D formats  
• Fully EDID Compliant  
• Fully HDCP Compliant  
• Supports all VESA formats which is perfect when used with specialized projectors or commercial  
LCD panels.  
• Enables 10.2Gbps of HDMI (including HDCP) over 350ft Cat5/6/7 cable.  
• Highest Audio Formats: Dolby TrueHD & DTS Master Audio 7.1 (and all below)  
• Supports Refresh Rates: 24Hz, 30Hz, 50, 60Hz  
• Supports Bi-directional IR transmission, perfect for Control4, RTI, HAI users as this ability allows  
sending IR to the remote locations from the control systems and from the remote locations to the  
control systems.  
• Supports RS232 pass-though, perfect for integrating a 3rd party control system.  
• Supports transmission distances up to 350ft @ at full resolution  
• Wall Mountable, mounting ears are included.  
• Locking Power Supplies  
• Easy to install, simple to operate and the most effective solution for long signal extension.  
• Ideal for whole house A/V, video broadcasting, remote monitoring, presentations and educational  
facilities.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SPECIFICATIONS:  
Transmitter Inputs  
HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)  
Link to Receiver (RJ45), Ethernet (RJ45)  
Link to Transmitter (RJ45), Ethernet (RJ45)  
HDMI (Type A), IR (1/8-inch), RS232 (DB9), Ethernet (RJ45)  
Yes  
Transmitter Outputs  
Receiver Inputs  
Receiver Outputs  
HDCP/EDID Compliant  
Supports high resolution video HD  
480i, 576i, 480p, 576p, 720p, 1080i, 1080p (24/30/50/60Hz),  
2k (2048x1080p), 4kx2k 4096x2160p  
Supports high resolution video VESA 640x480, 800x600, 1024x768, 1280x800, 1280x768,  
1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200,  
2048x1080p and 4096x2160p - 4 times higher than 1080p  
Distance at the highest resolution  
and full color depth  
350ft  
Deep Color  
48bit up to 330ft (100m)  
Power Consumption (max.)  
Video Bandwidth  
2.5W (transmitter) and 5.5W (receiver)  
up to 10Gbps  
Input TMDS signal  
Input DDS signal  
1.2 volts (peak-to-peak)  
5 volts (peak-to-peak)  
Power Supply  
5V/4A (110/220 universal) – Locking Type  
5.98×4.13×1.22 (Lx W x H)  
2.1 (transmitter + receiver)  
-5 to +35°C (-41 to +95 °F)  
5 to 90 % RH (no condensation)  
Dimensions (inch)  
Weight (lb)  
Operating Temperature Range  
Operating Humidity Range  
PANEL DESCRIPTION  
5.1. Transmitting Module  
5.1.1. Front Panel  
1
2
3
4
1. HDMI Input  
2. Ethernet In/Out  
3. IR RX  
4. IR TX  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
5.1.2. Rear Panel  
1
2
3
4
1. RS-232 In  
2. POWER ON Indicator  
3. LINK to a Receiver  
4. 5V Locking Power In  
5.2. Receiving Module  
5.2.1. Front Panel  
1
2
3
4
1. HDMI Output  
2. Ethernet In/Out  
3. IR RX  
4. IR TX  
5.1.2. Rear Panel  
1
2
3
4
1. RS-232 In  
2. POWER ON Indicator  
3. LINK to a Transmitter  
4. 5V Locking Power In  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
CONNECTION AND OPERATION  
1. Connect the HDMI Source e.g., Cable/satellite Receiver, Blu-Ray Player or a Video Switch to the AT-HD4-  
V110SR (transmitting unit)  
2. Connect the HDMI Display e.g., Projector, LCD/LED or a switch to the AT-HD4-110R (receiving unit)  
3. Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired cor-  
rectly before connect it to the HD4-V110SR modules.  
4. Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video  
should appear on the display.  
5. For users who want to transmit IR signal from the Display to the source, should connect the IR RX to the  
receiver unit and IR TX to the transmitter.  
6. For users who want to transmit IR signal from the Source to the Display, should connect IR RX to the trans-  
mitter and IR TX to the receiver module.  
Note: It is very important to connect IR RX and IR TX to its proper connections. If the IR TX is connected to the  
IR RX connection or other way around, the IR sensors will get damaged.  
7. For users who want to transmit RS232 signal from the control system or computer to the display device,  
should connect the RS232 (DB9) cables to the transmitter and receiver modules respectively.  
8. RS232 Port on the transmitter and Receiver can also be used for firmware upgrades to the HD4-V110SR  
modules.  
TROUBLESHOOTING  
1. No Video Signal on the Display or Signal is going in and Out:  
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected and  
the distance is within the limits.  
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct con-  
nection bypassing all additional equipment.  
c. Please try to re-terminate your CAT5/6/7 wire to 568B  
d. Reboot your source and try connecting it directly to the display to see if the video and audio will pass-  
through. If so, please go into the menu of the source and select an actual resolution that TV handles instead  
of AUTO – which is default.  
e. If your sources is a computer (laptop or desktop), please enable the DVI output.  
Windows computers: Select Properties Select Display resolutions Select Detect Display Select  
second Display Select Extended Display check box Select most appropriate resolution (most basic would  
be 1024x768)  
Mac Computers: Select Settings Select Displays Select Detect Display Select Arrangement  
Select Mirror Displays Select most appropriate resolution (most basic would be 1024x768)  
2. IR Signal is not passing through:  
Make sure you have IR RX and IR TX connected to its respective interfaces. If not, you may have burned the  
IR sensor on the IR RX or and IR TX and therefore should replace them.  
3. No Audio Signal or Garbled Audio  
a. Your display might not be able to accept audio formats that you are trying to send, most displays can only  
accept PCM or Stereo Audio as they only have 2 speakers. Please try selecting PCM or Stereo audio under  
the source audio configuration.  
b. If you are connecting Source to an AVR with the AT-HD4-V110SR and AVR is connected to a TV or a Projec-  
tor with a standard HDMI cable or another extender and your AVR is only not getting full Dolby Digital or  
DTS audio. This issue is related to the EDID issue of the AVR, we suggest changing an AVR for a better one  
or using AT-HDSync (Atlona HDMI Corrector) to fix this issue.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
SAFETY INFORMATION  
Avoid excessive humidity, sudden  
temperature changes or temperature  
extremes.  
Safeguards  
To reduce the risk of electric shock, do not  
expose this product to rain or moisture.  
Keep this product away from wet locations  
such as bathtubs, sinks, laundries, wet  
basements and swimming pools.  
If the wall plug does not fit into your local  
power socket, hire an electrician to replace  
your obsolete socket.  
Use only accessories recommended by  
ATLONA to avoid fire, shock or other  
hazards.  
Do not modify the wall plug.  
Doing so will void the warranty and safety  
features.  
Unplug the product before cleaning. Use  
a damp cloth for cleaning. Do not use  
cleaning fluid or aerosols, which could  
enter the unit and cause damage, fire or  
electrical shock. Some substances may  
also mar the finish of the product.  
This equipment should be installed near  
the socket outlet and the device should  
be easily accessible in case it requires  
disconnection.  
Precautions  
Never open or remove unit panels or make  
any adjustments not described in this  
manual. Attempting to do so could expose  
you to dangerous electrical shock or other  
hazards. It may also cause damage to your  
AT-HD4-V110SR. Opening the product will  
void the warranty.  
FCC Regulations state that any  
unauthorized changes or modifications to  
this equipment not expressly approved by  
the manufacturer could void the  
user’s authority to operate this  
equipment.  
Do not attempt to service the unit. Instead  
disconnect it and contact your Authorized  
ATLONA reseller or contact ATLONA  
directly.  
Operate this product using only the  
included external power supply. Use of  
other power supplies could impair  
performance, damage the product or cause  
fires.  
In the event of an electrostatic discharge,  
this device may automatically turn off. If this  
occurs, unplug the device, and plug it back  
in.  
Protect and route power cords so they will  
not be stepped on or pinched by anything  
placed on or against them. Be especially  
careful of plug-ins, or cord exit points from  
this product.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
1. LIMITED WARRANTY  
Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-  
companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from  
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law  
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-  
tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.  
2. CUSTOMER REMEDIES  
Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’  
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this  
Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty  
is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-  
ranted for the remainder of the original warranty period or 3 year, whichever is longer.  
3. NO OTHER WARRANTIES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS  
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-  
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO  
THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-  
CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.  
4. NO LIABILITY FOR DAMAGES  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALLATLONA TECHNOLOGIES OR  
ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-  
CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,  
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING  
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-  
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’  
ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-  
ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT  
APPLY TO YOU.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  
ATLONA PRODUCT REGISTRATION  
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.  
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership  
record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware  
updates.  
At Atlona, we respect and protect your privacy and assure you that your registration information is completely  
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-  
ranty rights.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
For International: 1-408-962-0515  

Acer Laptop TravelMate 420 User Manual
Acer Laptop TravelMate 4050 User Manual
a d s Speaker C10ps User Manual
Advantech Computer Hardware UNO 2173A AF User Manual
Agri Fab Lawn Mower 45 02671 User Manual
American DJ DJ Equipment the Max User Manual
American Dryer Corp Clothes Dryer AD 670 User Manual
Asus Network Card NCLV D A User Manual
Beko Freezer UF483APW User Manual
Beko Ice Maker TL 546 APS User Manual