Atlona 16 by 16 DVI and Audio
Matrix Switcher
AT-HDDVI1616-AM
User Manual
Toll free: 1-877-536-3976
Local: 1-408-962-0515
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The Atlona 16 by 16 DVI and Audio Matrix Switcher is HDCP compliant, has 3 control options, 9
programmable memory presets, fast switching, and EDID learning. With switching as fast as .5
seconds and resolutions of up to 1920x1200 or 2k by 1k get the crisp video needed for presentations
of all types.
Package Contents
• 1 x AT-HDDVI1616-AM
• 1 x IR Remote
• 1 x IR Receiver Module
• 1 x RS-232 cable
• 2 x Power Cord
• 1 x Software CD
• 1 x User Manual
IR Receiver Module
Power Cord
RS-232 cable
Features
• HDCP compliant for seamless connections.
• 9 programmable memory presets for quick switching to the most used settings
• With the learning feature, EDID allows for compatibility between any source and display
• Redundant power supply keeps the switcher running in the event the main power supply fails
• Fast selection, switching time can be as fast as 0.5 seconds. Switching time varies with different
displays.
• RS-232 compatible
• Independent audio and video switching, allowing 2Channel audio to be sent to any amp or recorder
needed.
• TCP/IP control enabled
• Mountable with 4RU Racks
Toll free: 1-877-536-3976
Local: 1-408-962-0515
3
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Bandwidth frequency
10.2 Gbps
Input Ports
16 x DVI-D (female)
16 x Stereo Audio (balanced/unbalanced)
16 x DVI-D (female)
Output Ports
16 x Stereo Audio (balanced/unbalanced)
1 x RS-232
1 x Ethernet/TCP/IP
1 x 3.5mm IR
Resolution outputs
Video: up to 2kx1k (2048x1080p)
Vesa: up to 1920x1200
6.89x19.02x12.6 (inch) or 175x483x320 (mm)
15.43lbs or 7kg
Dimensions (HxWxD)
Weight
Temperature
Power consumption
-4°F to 158°F or -20°C to 70°C
25W
Panel Description
Front Panel
1
2
3
4
5
1. Power Indicator. Red LED will light up when power is on.
2. IR Receiver. Point your included IR remote control for the matrix switcher to receive commands
3. LCD Display. Displays commands and status messages
4. Menu for switching inputs, outputs, and functions
5. Menu for selecting inputs and outputs for your menu selections
Toll free: 1-877-536-3976
Local: 1-408-962-0515
4
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel
5
6
7
1
2
8
3
4
1. Video Inputs. Sources such as DVD players and computers should be connected here.
2. Video Outputs. Video displays should be connected here.
3. Audio Inputs. Stereo audio should be connected here with a balanced or unbalanced
connection.
4. Audio Outputs. Stereo audio connection output of either balanced or unbalanced audio.
5. TCP/IP connector. Connect to your switcher through a network by connecting an Ethernet cable
here.
6. IR Port. Connect included IR Receiver here for extended IR capabilities.
7. RS-232 connector. Connect included RS-232 cable here if you wish to control your switcher by
PC or 3rd party controller
8. Primary and Secondary Power Supply. Connect included power cables here.
Panel Control
AV : Used to select input to output. Example: Input 3 to output 5 - Press 3 then AV then 5
(displays as 3AV5 on the LCD display)
Video: Independent switching to transfer just the video of an input to an output. Example: Video
from input 1 to output 3 - Press 1 then Video then 3 (displays as 1V3)
Audio: Independent switching to transfer just the audio of an input to an output. Example: Audio
from input 2 to output 5 - Press 2 then Audio then 5 (displays as 2A5)
“,” : Select multiple outputs with this. Example: Input 1 to output 3-5. Press 1 then AV then 3,4,5
(displays as 1AV345)
ALL : Press to connect all outputs for an input. Example: Input 2 to all outputs. Press 2ALL
Memory: Save the current settings for the switcher to create a reset between 0-9. Press Memory3
to save as preset 3
Recall: Uses saved presets that you’ve created. Press Recall3 to pull up what you saved with Memory3
Enter: Used to end each selection. Example: 3AV5, press enter after to confirm your choice
<--: Used for EDID selection or as a backspace. Hold for 10 seconds for EDID commands
Toll free: 1-877-536-3976
Local: 1-408-962-0515
5
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Input Selection:
Press the number corresponding with the input you wish to select,
for numbers 10 and above select 10+ and the number following.
Example: 10 = 10+ and 0
Menu Selection:
Choose the action you wish to perform. At this time with the
AT-HDDVI1616-AM the menu items you will use are AV, Video,
Audio and ALL. Example: Input 3 with output 5. Press #3 in the
input section, press AV, and then press #5 in the output section.
The LCD display will show the input as 3AV5 on its screen.
Output Selection:
Press the number of the corresponding output (display) you wish
to select. For numbers 10 and above, select 10+ and the number
following. Example: 13 = 10+ and 3
Note:
Multiple outputs are not selectable through the IR Remote control
at this time. They are available through the front panel, TCP/IP
and RS-232 controls.
TCP/IP
TCP/IP is another way to control your AT-HDDVI1616-AM. Connect with an ethernet cable to your
network or computer. After connecting the cable you’ll need to configure the IP on your computer.
IP address:
Subnet mask:
Default gateway:
192.168.0.80
255.255255.0
192.168.0.1
Preferred DNS:
Alternate DNS:
202.96.134.133
202.96.128.68
Use a straight cable to connect to a router or network.
Use a crossover cable to connect directly to a computer.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
6
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP/IP Set Up
First Step: Configuring IP
Go to the Network Connections
folder and right click on the
connection you would like to edit.
Select Properties.
Find Internet Protocol in your list. There
will be either Version 4 or 6, if there
are both protocols choose Version 4.
Once highlighted click on the properties
buttons below the list box.
Once the window comes up enter in
the IP address, subnet mask, default
gateway, preferred DNS server and
alternate DNS server information
into each field.
IP address: 192.168.0.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1
Preferred DNS server: 202.96.134.133
Alternate DNS server: 202.96.128.68
Note: Port 80 is a placeholder, if the network already has a .80 it can be changed to one that isn’t in use.
Second Step: Adding the Matrix to a network
To change the IP of the Matrix (normally 192.168.0.178) type the matrix IP address into Internet
Explorer’s address bar. A log in screen should appear.
The password is 88888. You must press
the Login button. Pressing enter will
cause it to return with a failed password
page.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
7
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the “system info” or
“change password” buttons
to change the information for
the matrix.
Once the system info button
is selected it will switch to the
Network page. To add this to a
network, change the “0” in the
IP, Gateway, and DNS server to
“1”. Press the apply button at
the bottom of the page, then
the reset device button in the
top button menu.
Change the IP on the computer
from 192.168.0.80 to
192.168.1.80 then type the
192.168.1.178 into the address
bar. If successful the log in page
will display again.
Third Step: Using the TCP/IP software
Download the newest software for control off the web page for the AT-HDDVI1616-AM.
Unzip the file. An Atlona icon (like pictured to the left) should appear. Double click the file
to open up the control software.
The software should automatically detect the 16x16 Matrix, if you have more
than one HD Matrix from Atlona, use the drop down menu to select
AT-HDDVI1616-AM. Once selected, press either Enter to go to the control
interface or Password Setup to change/add a password for control of the matrix.
Once in the control interface there, click the TCP/IP button on the top of
the window. Enter in the IP: 192.168.0.178 (192.168.1.178 if changed)
and port 4001, if it has not already been auto-generated. If done
correctly then a pop up window will display saying “connect success!”.
Note: Both Mreset and All+Through will mirror the inputs and outputs of
the AT-HDDVI1616-AM.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
8
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232
Connection
RS-232 is connected through a 9-pin female D connector. The pins will have functions
associated with them, some will be unassigned.
No.
1
Pin
----
Tx
Function
Not used
Transmit
Receive
5 4 3 2 1
2
3
Rx
4
----
Gnd
----
----
----
----
Not used
Ground
5
6
Not used
Not used
Not used
Not used
7
9 8 7 6
8
9
Baud Rate: 9600bps
Data Bit: 8bits
Parity: None
Stop Bit: 1bit
Command
The command codes are very sensitive, do not change capitalization, spacing, or lettering.
System Command
Type
Feedback
(Model #)
Lock
Function
Brings up the model information
Locks the front panel of the Matrix switcher
Unlocks the front panel of the Matrix switcher
Brings up the firmware version
Lock
Unlock
Unlock
Version
(Firmware #)
Each command or feedback is terminated with a carriage return.
Note: If the command fails or is incorrect the feedback should be “Command FAILED”
Command
PWON
Feedback
PWON
Description
Turns power on
PWOFF
Statusx1
Status
PWOFF
x1AVx2
Turns power off
Shows what input is connected to selected output
x1AVx1, x2AVx2,
x3AVx4, ....
Displays which inputs are currently connected to which
outputs
Save[Y]
Save2
Saves settings for future use, saves vary from 0 to 9
Pulls up saved settings for the number you selected
Erases the save for the number you selected
Recall[Y]
Recall2
Clear[Y]
Clear2
EDIDMx1AVx2
EDIDMx1AVx2
Copies the EDID from output (x1) to Input (x2)
(output 3 to input 7 = EDIDMx3AVx2)
EDIDMInit
EDIDMInit
Resets EDID to factory settings
Cancels the previous command
Undo
Undo
Toll free: 1-877-536-3976
Local: 1-408-962-0515
9
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Command
x1All
Feedback
x1All
Description
Sets selected input to all outputs
(x3All would set input 3 to all)
x1#
All#
x1$
x1#
All#
x1$
Sets input to corresponding output
(x4# would set input 4 to output 4)
Resets all inputs to corresponding outputs
(input 3 to output 3, input 4 to output 4, etc...)
Turns off output channel
(to turn off output 3 = x3$)
All$
All$
Turns off all output channels
x1Ax2
x1Ax2
Sets audio input to selected output
(x3Ax4 = input 3 audio to output 4)
x1Ax2,x3,x4
x1Vx2
x1Ax2,x3,x4
x1Vx2
Sets audio input to multiple outputs
(x2Ax1,x3,x5 = input 2 audio to output 1, 3, and 5)
Sets video input to selected output
(x1Vx5 = input 1 video to output 5)
x1Vx2,x3,x4
x1AVx2
x1Vx2,x3,x4
x1AVx2
Sets video input to multiple outputs
(x4Vx1,x5,x9,x12 = input 4 video to outputs 1, 5, 9, and 12)
Switch input to output
(input 3 to output 5 = x3AVx5)
x1AVx2,x3,x4
x1AVx2,x3,x4
Switch input to multiple outputs
(input 3 = x3AVx1,x2)
EDID(Extended Display Identification Data)
EDID is the standard compatibility signal passed between most sources and video displays. It
allows the devices to make sure they support the same resolutions and timing.
The AT-HDDVI1616-AM has two EDID settings: default and learning. Default saves the
settings of 1920x1200 resolution and 2 channel audio to all outputs. The learning setting will
allow for the copying of an output’s EDID to specific inputs.
Set Up
EDID can be set up in two ways: RS-232 and the front panel.
To set up EDID through the front panel hold the <-- button for 10 seconds. Once in EDID
mode to set the matrix to default press “1”. To use Learning mode and set individual EDIDs
press “2”, the output number to copy, Enter, the input number to save to, and then press
Enter again. Repeat the learning process for all inputs until the EDID is set up as needed.
To set up EDID through RS-232 follow the steps for RS-232 set up then use the command
EDIDMx1AVx2. The x1 and x2 are place holders for output and input. If saving output 5 to
input 3 the command would be EDIDMx5AVx3. Repeat until all inputs are set up.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
10
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Default
Default is used for when all displays support 1920x1200. If a display does not support this
resolution then it will show only a black screen. (i.e. Output5 having the native resolution of
1280x720 would cause it to show only a black screen in default)
1280x720
Output 5
1920x1280
Input 4
1920x1200
Output
1920x1200
Input 2
1920x1200
Output 11
1280x720
Input 8
Learning
Learning EDID allows for the resolution and audio formats of a display to be saved to an input
source. Once this setting is saved it will only output that resolution and audio, which will
cause a black screen to display on any output that does not support the same settings.
In the above diagram, output5 can be saved to all 3 inputs allowing all three outputs to use
the devices at 1280x720 (most displays have multiple resolution capabilities. Outputs 2 & 11
however can only be saved to inputs 2 & 4 as their native resolutions are 1920x1200 and
input 8 is incapable of producing that resolution without a scaler.
Audio(Balanced and Unbalanced)
The AT-HDDVI1616-AM uses captive screw connectors for audio. Captive screw uses two
types of audio: balanced and unbalanced. To be sure which to use refer to the manual for the
connected device.
There are 3 connection possibilities, 2 unbalanced and 1 balanced (see picture below). When
used, a balanced input can only output balanced audio and an unbalanced input can only
output unbalanced audio but either unbalanced connection can be used.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
11
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Laptops
Cameras
PCs
PC w/RS-232
and TCP/IP
AT-HD610
AT-PA100
Projectors
Laptops
PCs
HDTV
Toll free: 1-877-536-3976
Local: 1-408-962-0515
12
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture
Do not modify the wall plug. Doing so will
void the warranty and safety features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in the case it requires
disconnection.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Precautions
FCC regulations state that any unauthorized changes or modifications to this equipment,
not expressly approved by the manufacturer, could void the user’s authority to operate this
equipment.
Operate this product using only the included external power supply. Use of other power
supplies could impair performance, damage the product, or cause fires.
In the event of an electrostatic discharge this device may automatically turn off. If this occurs,
unplug the device and plug it back in.
Protect and route power cords so they will not be stepped on or pinched by anything placed
on or against them. Be especially careful of plug-ins or cord exit points from this product.
Avoid excessive humidity, sudden temperature changes or temperature extremes.
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements,
fish tanks, and swimming pools.
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or
aerosols. Such products could enter the unit and cause damage, fire, or electric shock. Some
substances may also mar the finish of the product.
Never open, remove unit panels, or make any adjustments not described in this manual.
Attempting to do so could expose you to dangerous electrical shock or other hazards. It may
also cause damage to your AT-HDDVI1616-AM. Opening the product will void the warranty.
Do not attempt to service the unit. Disconnect the product and contact your authorized
Atlona reseller or contact Atlona directly.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
13
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Limited Warranty
Atlona Technologies warrants that (a) its products (AT-HDDVI1616-AM) will perform
substantially in accordance with the accompanying written materials for a period of 3 years
from the date of receipt and (b) that the product will be free from defects in materials and
workmanship under normal use and service for a period of 3 years. In the event applicable
law imposes any implied warranties, the implied warranty period is limited to 3 years from
the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied
warranty, so the above limitation may not apply to customers that fall within those areas.
Customer Remedies
Atlona Technologies’ and its suppliers’ entire liability and Customer’s exclusive remedy
shall be, at Atlona Technologies’ decision, either return of the price paid for the product,
repair, or replacement of the product that does not meet this Limited Warranty and which is
returned to Atlona Technologies with a copy of the Customer’s receipt. This Limited Warranty
is void if failure of the product has resulted from accident, abuse, misapplication, or natural
occurrence. In example but not limited to: power surges (electrical storms, local power
outage), dropping the product (or items on the product), contact with fluids, and physical
misconduct (i.e. kicking or punching). Any replacement product will be warranted for the
remainder of the original warranty period.
No other warranties
To the maximum extent permitted by applicable law, Atlona Technologies and its
suppliers disclaim all other warranties, either expressed or implied, including, but not limited
to, implied warranties of merchantability and fitness for a particular purpose, with regard to
the product and any related written materials. This Limited Warranty gives customer specific
legal rights. Customers may have other rights depending on the jurisdiction.
No liability for damages
To the maximum extent permitted by applicable law, in no event shall Atlona
Technologies or its suppliers be liable for any damages arising out of the use of or inability
to use this product, even if Atlona Technologies has been advised of the possibility of such
damages. Such damages include but are not limited to: special, incidental, consequential,
or indirect damages for personal injury, loss of business profits, business interruption, loss
of business information, or any other pecuniary loss. Atlona Technologies’ and its suppliers’
entire liability under any provision of this agreement shall be limited to the amount actually
paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation of
liability for consequential or incidental damage. The above limitations may not apply to you in
such jurisdictional cases.
Toll free: 1-877-536-3976
Local: 1-408-962-0515
14
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Atlona Product Registration
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an
extra few moments to register your new purchase.
Registration creates an ownership record if your product is lost or stolen and helps ensure
you’ll receive notification of performance issues and firmware updates.
At Atlona, we respect and protect your privacy, assuring you that your registration
information is completely secure. Atlona product registration is completely voluntary and failure
to register will not diminish your limited warranty rights.
To register go to: http://www.atlona.com/registration
Toll free: 1-877-536-3976
Local: 1-408-962-0515
15
atlona.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|