¤
NX1101
Gigabit PCI Network Adapter
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the ASUS NX1101
1. Power off your computer and unplug your PC power cord.
2. Open your PC case and find an available PCI slot on the motherboard.
3. Insert the ASUS NX1101 into the PCI slot until all contacts are seated.
4. Secure the ASUS NX1101 bracket to your PC chassis with a screw.
5. Close your PC case.
6. Connect one end of Ethernet RJ-45 cable to the Adapter.
ASUS NX1101 Driver Installation
Windows 95, 98, 98SE, ME, 2000, and XP
After installing the network adapter for the first time, Windows will detect
the new hardware. Browse to the driver on the provided support CD. The
support CD also provides an AutoRun to install drivers automatically.
Window NT4.0 and NetwareX
Login in to NT4.0/NetwareX after installing the network adapter. Insert
the provided support CD and follow the instructions in the “Readme.txt”
to install the drivers.
DOS
Go to DOS after installing the network adapter. Insert the provided support
CD and follow the instructions in the “Readme.txt” to install the drivers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Status Indicators and Ports
10/100 ACT: Blinking: Data transferring at 10 or 100Mbps
1000 ACT: Blinking: Data transferring at 1,000Mbps
RJ-45: This is a port used to connect the Ethernet cable
RJ-45
Technical Specifications
Communication Standards
Compliant with IEEE 802.3z
Full Duplex flow control IEEE 802.3x
IEEE 802.1q VLAN tagging
10BASE-T:
Compliant with IEEE 802.3
100BASE-TX: Compliant with IEEE 802.3u
1000BASE-T: Compliant with IEEE 802.3ab
Transfer rate
10Mbps, 100Mbps, 1,000Mbps
Connector
RJ-45 Ethernet port
System Interface
IBM compliable PC with available PCI slot (PCI 2.1 or PCI 2.2)
Supported OS
Windows: 95, 98/98SE, ME, 2000, XP, NT 4.0
Temperature
Operating: 0 deg C – 55 deg C
Storage:
-25 deg C – 75 deg C
Humidity: 5% – 95% (Non-condensing)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|