Asus Car Video System VB199 Series User Manual

VB199 Series  
LCD Monitor  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extention cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, in case use at a PC then it should  
use the monitor only with computers which have appropriate  
configured receptacles marked between 100-240V AC.  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
The wall socket shall be installed near the equipment and shall be easily  
accessible.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the cables  
and power cord. Follow the correct lifting techniques when positioning the  
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.  
Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor  
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed  
with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended  
for use with the LCD. Never spray cleaner directly on the screen, as it may drip  
inside the monitor and cause an electric shock.  
The following symptoms are normal with the  
monitor:  
The screen may flicker during the initial use due to the nature of the fluorescent  
light. Turn off the Power Switch and turn it on again to make sure that the  
flicker disappears.  
You may find slightly uneven brightness on the screen depending on the  
desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the previous  
screen may remain after switching the image. The screen will recover slowly or  
you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore, contact  
your dealer or service center to fix it. Do not repair the screen by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components when  
trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a task.  
NOTE: Tips and additional information to aid in completing a task.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Where to find more information  
Refer to the following sources for additional information and for product and  
software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may have  
been added by your dealer. These documents are not part of the standard  
package.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.1  
Welcome!  
Thank you for purchasing the ASUS® VB199 Series LCD monitor!  
The latest screen LCD monitor from ASUS provides a crisper, broader, and brighter  
display, plus a host of features that enhance your viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the VB199 Series brings to you!  
1.2  
Package contents  
Check your VB199 Series LCD Monitor package for the following items:  
LCD monitor  
Monitor base  
Quick Start Guide  
Warranty card  
1 x Power cord  
1 x VGA cable  
1 x DVI cable(VB199T/N)  
1 x Audio cable (VB199T/S)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor VB199 Series  
1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3  
Assembling the monitor  
To assemble the monitor:  
1.  
Connect the base with the monitor. A click indicates that the base has been  
connected successfully.  
2.  
Adjust the monitor to the angle that is most comfortable.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
1
2
1-2  
Chapter 1: Product Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4  
Monitor introduction  
1.4.1 Front of the LCD monitor  
1
2
3
4
5
6
1.  
Button:  
Automatically adjust the image to its optimized position, clock, and  
phase by long pressing this button for 2-4 seconds (for VGA mode only).  
Use this hotkey to switch from six video preset modes (Scenery Mode,  
Standard Mode, Theater Mode, Game Mode, Night View Mode, and  
sRGB Mode) with SPLENDID™ Video Intelligence Technology.  
Exit the OSD menu or go back to the previous menu as the OSD menu  
is active.  
2.  
Button:  
Press this button to decrease the value of the function selected or move  
to the next fuction.  
This is also a hotkey for Volume adjustment.(VB199T/S)  
This is also a hotkey for Contrast adjustment. (VB199N/D)  
3.  
4.  
MENU Button:  
Press this button to enter/select the icon (function) highlighted while the  
OSD is activated.  
Button:  
Press this button to increase the value of the function selected or move  
right/up to the next function.  
This is also a hotkey for Brightness adjustment.  
5.  
Power Button:  
Press this button to turn the monitor on/off.  
ASUS LCD Monitor VB199 Series  
1-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.  
Power Indicator  
The color definition of the power indicator is as the below table.  
Status  
Blue  
Description  
ON  
Amber  
OFF  
Standby mode  
OFF  
1.4.2 Rear of the LCD monitor  
Screw holes for  
VESA Wall Mount  
Rear connectors  
3
2
4
1
Rear connectors (from left to right)  
1.  
2.  
3.  
4.  
AC-IN port. This port connects the power connector from the bundled  
power cord.  
Audio-in port. This port connects PC audio source by the bundled audio  
cable. (VB199T/S)  
DVI port. This 24-pin port is for PC (Personal Computer) DVI-D digital  
signal connection. (VB199T/N)  
D-SUB port. This 15-pin port is for PC VGA connection.  
1-4  
Chapter 1: Product Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1  
Detaching the arm/stand  
(for VESA wall mount)  
The detachable stand of the VB199 Series LCD monitor is specially designed for  
VESA wall mount.  
To detach the arm/stand:  
1.  
2.  
3.  
Remove the arm cover.  
Have the front of the monitor face down on a table.  
Use a screwdriver to remove the three screws on the stand of the monitor as  
the below drawing shows.  
4.  
Detach the stand from the monitor.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand of the monitor when you remove the screws.  
screws  
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
ASUS LCD Monitor VB199 Series  
2-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable for you.  
Hold the stand to prevent the monitor from falling while changing its angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
-5º~20º  
2-2  
Chapter 2: Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1  
OSD (On-Screen Display) menu  
3.1.1 How to reconfigure  
VB199  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
1.  
2.  
Press the MENU button to activate the OSD menu.  
Press and to navigate through the functions. Highlight and activate  
the desired function by pressing the MENU button. If the function selected  
has a sub-menu, press and again to navigate through the sub-menu  
functions. Highlight and activate the desired sub-menu function by pressing  
the MENU button.  
3.  
4.  
Press  
and  
to change the settings of the selected function.  
To exit the OSD menu, press the  
adjust any other function.  
button. Repeat step 2 and step 3 to  
3.1.2 OSD Function Introduction  
1. Splendid  
This function contains six sub-functions that you can select for your  
preference. Each mode has the Reset selection, allowing you to maintain  
your setting or return to the preset mode.  
VB199  
Splendid  
Color  
Scenery Mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Input Select  
System Setup  
Night View Mode  
sRGB  
Move  
Menu  
Exit  
ASUS LCD MonitorVB199 Series  
3-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Scenery Mode: This is the best choice for scenery photo displaying  
with SPLENDID™ Video Intelligence Technology.  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with  
SPLENDID™ Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene  
game or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
sRGB: This is the best choice for viewing photos and graphics from PCs.  
In the Standard Mode, the Saturation, Skin Tone, Sharpness,  
ASCR are not user-configurable.  
In the sRGB, the Brightness, Contrast, Saturation, Color Temp,  
Skin Tone and ASCR are not user-configurable.  
2. Color  
Select the image color you like from this function.  
VB199  
Splendid  
Color  
Brightness  
Contrast  
100  
80  
Image  
Saturation  
Color Temp  
50  
Input Select  
System Setup  
User Mode  
Natural  
Skin Tone  
Move  
Menu  
Exit  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and one User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are  
userconfigurable; the adjusting range is from 0 ~ 100.  
3-2  
Chapter 3: General Instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Image  
You can adjust the image Sharpness, Trace Free, ASCR, trace free, Position  
(VGA only), and Focus (VGA only) from this main function.  
VB199  
Splendid  
Color  
Sharpness  
40  
60  
Trace Free  
ASCR  
Image  
OFF  
Input Select  
Position  
Focus  
System Setup  
Move  
Menu  
Exit  
Sharpness: Adjusts the picture sharpness. The adjusting range is from  
0 to 100.  
Trace Free: Speed up the response time by Over Drive technology. The  
adjusting range is from lower 0 to faster 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
4. Input Select  
Selects the input source from VGA or DVI (VB199T/N).  
VB199  
Splendid  
Color  
VGA  
DVI  
Image  
Input Select  
System Setup  
Move  
Menu  
Exit  
ASUS LCD Monitor VB199 Series  
3-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. System Setup  
Adjusts the system configuration.  
VB199  
Splendid  
Color  
Splendid Demo Mode  
Volume  
OFF  
83  
Image  
ECO Mode  
OFF  
Input Select  
OSD Setup  
System Setup  
Language  
English  
Information  
1/2  
Move  
Menu  
Exit  
VB199  
Splendid  
Color  
All Reset  
Image  
Input Select  
System Setup  
2/2  
Move  
Menu  
Exit  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
Volume: Adjusts the Volume level of speakers. (VB199T/S).  
ECO Mode: Turns the ECO Mode Function on or off.  
OSD Setup: Adjusts the horizontal position (H-Position), vertical  
position (V-Position), OSD Timeout, DDC/CI, and Transparency of the  
OSD screen.  
Language: Selects OSD language. The selections are English, French,  
German, Spanish, Italian, Dutch, Russian, Traditional Chinese, Simplified  
Chinese, Japanese and Korean.  
Information: Displays the monitor information.  
All Reset: Selects “Yes” to revert all settings to the factory default  
mode.  
3-4  
Chapter 3: General Instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.2  
Specifications  
Model  
Panel Size  
VB199T/N/S/D  
19”W (48.3 cm)  
Max. Resolution  
Brightness (Typ.)  
Cnrtast Ratio (Typ.)  
Viewing Angle (H/V), (CR10)  
Display Colors  
SXGA 1280*1024  
250cd/m2  
1000:1  
178°/178° (typ.)  
16.7 M  
Response Time  
D-SUB Input  
5ms (Gray to Gray)  
YES  
DVI Input  
DVI(VB199T/N only)  
Power On: < 17.1 W*  
*Based on Energy Star 6.0 standard  
1W x 2 (VB199T/S only)  
-5° ~ +20°  
Power Consumption  
Note  
Speaker (Build-in)  
Tilt  
VESA Wall Mounting  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Voltage Rating  
100 mm x 100 mm  
413 x 410 x 210 mm  
485 x 150 x 469 mm  
AC 100~240V(Built-in)  
ASUS LCD Monitor VB199 Series  
3-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to the  
monitor and the power outlet.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Press the  
button for two seconds to  
automatically adjust the image (for VGA input only).  
Adjust the H-Position or V-Position settings via OSD  
(for VGA input only).  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform All Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
Press the  
button for two seconds to  
automatically adjust the image (for VGA input only).  
Adjust the Phase and Clock settings via OSD.  
No sound or sound is low  
(VB199T/S)  
Ensure that the audio cable is properly connected to  
the monitor and the computer.  
Adjust the volume settings of both your monitor and  
computer.  
Ensure that the computer sound card driver is  
properly installed and activated.  
3-6  
Chapter 3: General Instruction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4  
Supported timing list  
Resolution  
640x350  
V(Hz)  
70  
H(KHz)  
31.469  
31.469  
35  
640x480  
60  
640x480  
67  
640x480  
72  
37.861  
37.5  
640x480  
75  
720x400  
70  
31.469  
35.156  
37.879  
48.077  
46.875  
49.725  
48.363  
56.476  
57.7  
800x600  
56  
800x600  
60  
800x600  
72  
800x600  
75  
832x624  
75  
1024x768  
1024x768  
1024x768  
1024x768  
1152x864  
1280x1024  
1280x1024  
60  
70  
72  
75  
60.023  
67.5  
75  
60  
63.981  
79.976  
75  
ASUS LCD Monitor VB199 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7  

3Com Gas Grill GNS 430 430A User Manual
AD Building Set HV G Series User Manual
Aiphone Network Cables VC M User Manual
Air King Greenhouse Kit Ak912 User Manual
Airlink101 Security Camera AIC1620W User Manual
Allstar Products Group Safety Gate ANSI UL 325 User Manual
American Standard Outdoor Shower 1660502 User Manual
Apple Network Card Network Setup User Manual
ATON Speaker System 051 User Manual
AVerMedia Technologies Network Card M039R User Manual