CADET ELITE™ 6’ x 42”
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
CADET ELITE™ 6’ X 42” WHIRLPOOL
Comfortable bathing design with form-fitted
backrest and molded in armrests
❏ 2774E (specify White 020, Bone 021, or
Linen 222)
• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor
with dry run seal
• Eight multi-directional and flow adjustable jets
including:
Two high performance Ideal-flow™ Jets
Six interchangeable Flex-jets™
• Two silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
❏ 2774EC (specify White 020, Bone 021, or
Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
72” x 42” x 19-3/4"
(1829 x 1067 x 502mm)
Components Needed:
❏
❏
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
Custom Accessories Available:
❏
❏
❏
Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
• NFPA 258 for Smoke Density
Six Foot Apron: 6FT-APRON (specify White
020, Bone 021, or Linen 222)
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
❏
❏
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
* See American Standard Faucet Selector
SPS 2774E
HD-009
© 2003 American Standard Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Revised 6/03
|