Instructions
®
American DJ
Us e r
4 CHANNEL POWER PACK
BPP-20
Thank you for purchasing this American DJ® product. For your convenience this
product has been tested and is ready to be used, there is no assembly required.
Please read the following instructions before installing or using your new unit.
Product Description:
The BPP-20™ is a 4 channel, 10A per channel power pack with a total capacity of 20 amps. Each channel
features two 120V, 3-prong A/C sockets on the rear of the unit, individual fuse for each channel, and green LED
lights indicating channels in use. The BPP-20™has two 8 pin din connectors linkable to the TP-1201™ or the
FSR-8/System. Designed to mount on truss, stands, or racks. For use with inductive loads.
2
FRONT VIEW
GENERAL FUNCTIONS (FRONT) :
1. POWER OUTPUT: 4 channel, 3-prong edison output
sockets. 8 total OUTput sockets.
2. FUSE: 4 x 10A fuses.
1
GENERAL FUNCTIONS (REAR) :
3. POWER INPUT: 120AC power input.
4. SIGNAL INPUT: 8 pin din socket, connect to TP-1201™,
REAR VIEW
FSR-800™.
5. SIGNAL OUTPUT: 8 pin din socket, connect to another
BPP-20™.
6. GREEN L.E.D.: Indicates which channels are in use.
7. RED L.E.D. + POWER SWITCH: Turn power switch on,
Red L.E.D. will be on when connected to power.
3
For service, contact your American DJ® Dealer.
Caution! Always disconnect the BPP-20™ from
main power before servicing unit, there may be
high voltage inside console. Remember to always
replace with same fuses.
7
6
4
5
© American DJ® Los Angeles, CA 90058
Download from Www.Somanuals.com. All Manuals Search And Download.
|