Saturn 4™
Introduction
Introduction: Thank you for purchasing the Saturn 4™ by Ameri-
can DJ®. The Saturn 4™ is a prepackage lighting system (Systems
includes; 3 XLR cable, 4 Saturn units, and 1 controller). Everything
you need for a great portable lighting system is included in this one
package. The system come with one master unit and three slave units.
The slave units will react to programs built into the master unit. The
master unit comes with several built-in programs and is activated by
sound. This system is great for mobile DJʼs, bands, and small clubs.
The system is system set up and easy in minutes and packs a powerful
light show in a relatively small package. For best results use this system
with fog to enhance the output of the beams.
Customer Support: American DJ® provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You may
suggestions. For service related issue please contact American DJ®
.
Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific
Standard Time.
Voice:
Fax:
E-mail:
(800) 322-6337
(323) 582-2610
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this system to rain or moisture.
Caution! There are no user serviceable parts inside these units. Do
not attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event any of your units require service please
contact American DJ.
User Instructions
PLEASE recycle the shipping carton whenever possible.
Safety Issues: These units may blow a fuse if the maximum allotted
load of 5 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless
otherwise instructed by an authorized American DJ® service technician.
Use of a different type fuse from that which is recommended may
cause fire or electric shock and will void the manufactures warranty.
American DJ®
4295 Charter Street
Los Angeles Ca. 90058
Rev. 10/01
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturn 4™
Controls and Functions
Saturn 4™
Set Up
Power Supply: Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ®
™
Saturn 4.™ The American DJ® Saturn 4 is available in a 120v and
220v version. Due to variations in line voltage from venue to venue, be
sure to plug your “Master” unit into a wall outlet with a matching power
supply before attempting to operate.
Data Cable Requirements: Your units require a standard 3-pin
XLR microphone cables for data input and data output (Figure 1).
The system includes three cables. If you require
cables of different or extended lengths, you may
uses any standard microphone cable or con-
struct your own. If you are constructing your own
cables, be sure to use standard two conductor
shielded cable (this cable may be purchased at
almost all pro sound and lighting stores). Your
cables should be made with a male and female
XLR connector on either end of the cable. Also
1
2
3
4 5 6 7
Figure 1
remember that DMX cable must be daisy chained
and can not be split.
1. Power Cord - Connect only to a matching power outlet. Never use
this fixture if the ground prong has been removed or broken off.
2. Channel 1 Output - This outlet will control the operation of any
slave unit as channel one.
3. Channel 2 Output - This outlet will control the operation of any
slave unit as channel two.
Notice: Be sure to follow figure three when making your own cables.
Do not use the ground lug on the XLR connector. Do not connect the
cableʼs shield conductor to the ground lug or allow the shield conductor
to come in contact with the XLRʼs outer casing. Grounding the shield
could cause a short circuit and erratic behavior.
4. Channel 3 Output - This outlet will control the operation of any
slave unit as channel three.
5. Remote Control Input - Do not attempt to connect an audio
signal to this jack, this will damage the unit! This jack is for
with the Saturn4/C controller only. Connecting an audio signal
jack, this will damage the PC board and void your manufactures
warranty!
use
this
XLR Female Socket
2 Cold
XLR Male Socket
1 Ground
XLR Pin Configuration
Pin 1 = Shield
2 Cold
1 Ground
Pin 2 = Data Compliment (negative)
3 Hot
3 Hot
Pin 3 = Data True (positive)
6. Fuse Holder - This housing stores the 5 amp GMA protective
fuse. Always replace with the exact same type fuse, unless other-
wise instructed to do so by an authorized American DJ service tech-
nician.
Figure 2
COMMON
1
2
1
2
DMX +
DMX -
DMX512 OUT
3-PIN XLR
DMX512 IN
3-PIN XLR
3
3
7. Microphone - This microphone receives external low frequencies
to trigger the unit. Tapping on the unit and high pitched sounds may
not trigger the unit.
Figure 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturn 4™
Operation
Saturn 4™
Lamp & Fuse Replacement
Sound Active Operation: This function allows a system to run
to the beat of the music without any type of controller.
Always replace with the exact same type lamp and fuse, unless
otherwise specified by an authorized American DJ® service tech-
nician.
Caution: Always disconnect the main power before performing any
type of service or fuse replacement! Always disconnect the main
power and allow the unit ample time to cool before attempting to
replace the lamp.
1. Mount your units in a safe and secure manner.
2. Connect the “slave” units to the “master” unit as detailed in the illus-
tration below.
3. If you wish to use the remote control, connect it now. The remote
control will allow you to activate a blackout mode.
4. Connect the unit to main power.
Lamp Replacement: Caution! Never open the unit while in use.
1. Be sure to follow the proper procedures when handling halogen
lamps.
5. The unit will now react to the bass sound of music via the internal
microphone.
2. Lamp replacement has been made simple by incorporating the
use of a removable lamp cover retained by two thumb screw.
3. Remove the thumb screws on the bottom of the unit that holds the
lamp cover in place.
Remote Control
4. Carefully remove the protective lamp cover.
5. Remove and replace the lamp.
6. Reassemble in reverse order.
Master
Slave 2
Fuse Replacement: To replace the protective fuse, use a flat head
screwdriver to unscrew and remove the fuse holder. Gently remove
the old fuse and replace it with a new one. Insert the fuse holder back
into the fuse housing and tighten.
Slave 1
Slave 3
For any other service related issues, please contact American DJ®
customer support.
Lamp Shield
Linking System: Your Saturn 4™ system comes with built-in pro-
grams for a four unit system. Follow the step above for proper linking
and set-up procedures. If the system is not set up completely, black
spots will appear in the programs.
Retaining screws
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturn 4™
Halogen Lamp Warning
Saturn 4™
1-YEAR LIMITED WARRANTY
Warranty
Halogen Lamp Warning: This fixture is fitted
with halogen lamps which are highly susceptible
to damage if improperly handled. Never touch the
lamps with your bare fingers as the oil from your
hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days)
from the date of purchase. This warranty shall be valid only if the product is purchased within
the United States of America, including possessions and territories. It is the ownerʼs respon-
sibility to establish the date and place of purchase by acceptable evidence, at the time ser-
vice is sought.
B. For warranty service, send the product only to the American DJ® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ® will pay return shipping charges only to a
designated point within the United States. If the entire instrument is sent, it must be shipped
in its original package. No accessories should be shipped with the product. If any acces-
sories are shipped with the product, American DJ® shall have no liability whatsoever for loss
of or damage to any such accessories, nor for the safe return thereof.
Saturn 4™
Cleaning
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
C. This warranty is void if the serial number has been altered or removed; if the product
is modified in any manner which American DJ® concludes, after inspection, affects the reli-
ability of the product; if the product has been repaired or serviced by anyone other than the
American DJ® factory unless prior written authorization was issued to purchaser by American
DJ®; if the product is damaged because not properly maintained as set forth in the instruction
manual.
2. Use a brush to wipe down the cooling vents.
3. Clean the external portion of the optics with glass cleaner and a
soft cloth every 20 days. Situation may very. If used heavily in clubs
with lots of fog, cleaning may be required more often.
4. Clean the internal portion of the optics with glass cleaner and a
soft cloth every 30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, American DJ® will replace defective
parts at its expense, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of American DJ® under
this warranty shall be limited to the repair of the product, or replacement thereof, including
parts, at the sole discretion of American DJ®. All products covered by this warranty were
manufactured after January 1, 1990, and bear identifying marks to that effect.
E. American DJ® reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any acces-
sory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ® in connection with this product, including
warranties of merchantability or fitness, are limited in duration to the warranty period set forth
above. And no warranties, whether expressed or implied, including warranties of merchant-
ability or fitness, shall apply to this product after said period has expired. The consumerʼs and
or Dealerʼs sole remedy shall be such repair or replacement as is expressly provided above;
and under no circumstances shall American DJ® be liable for any loss or damage, direct or
consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ® Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.
H. Lamps are not covered under this or any other warranty, either written or implied.
Download from Www.Somanuals.com. All Manuals Search And Download.
Saturn 4™
Specifications
MODEL: SATURN 4™
*
VOLTAGE :
120v~60Hz or 220v~50Hz
LAMP (PER UNIT):
ZB-64514 120v/300w or
ZB-64516 220v/300w (220v)
11.75"L x 11.25"W x 7.5"H
(with yoke extended)
9 LBS / 7 KGS. (unit)
6.3 AMP GMA
DIMENSIONS:
WEIGHT:
FUSE:
WORKING POSITION:
COOLING:
GOBOS:
ANY SAFE POSITION
FAN COOLED
NONE
6
CLEAR
1 YEAR (365 DAYS)
LENSES:
COLORS:
WARRANTY:
* Voltage is preset at the factory
Please Note: Specifications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
©American DJ® Supply
American DJ World Headquarters:
4295 Charter Street Los Angeles, CA. 90058-2520 USA
Tel: 323-582-2650 Fax: 323-582-2610
Download from Www.Somanuals.com. All Manuals Search And Download.
|