DLS 15™
Professional Two-Way Sound
Reinforcement Loudspeaker
DLS 15P™
Powered Professional Two-Way
Sound Reinforcement Loudspeaker
AMERICAN AUDIO
4295 Charter Street
Los Angeles, Ca. 90058
Rev. 4/05
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
D
Handling Precautions
D
ELECTRICAL PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product'senclosurethatmaybeofsufficientmagnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK).
THERE ARE NO USER SERVICEABLE PARTS
INSIDE REFER SERVICE TO YOUR AUTHORIZED
AMERICAN AUDIO® SERVICE TECHNICIAN.
IMPORTANT SAFETY INSTRUCTIONS
OBJECT AND LIQUID ENTRY - Never push objects of
READ INSTRUCTIONS — All the safety and operating
GROUNDING OR POLARIZATION
instructions should be read before the product is
operated.
•
Ifthisproductisequippedwithapolarizedalternating
current line plug (a plug having one blade wider than
theother), itwillfitintotheoutlet onlyoneway. This
isasafetyfeature.Ifyouareunabletoinserttheplug
fullyintotheoutlet, tryreversingtheplug. Iftheplug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
RETAIN INSTRUCTIONS — The safety and operating
instructionsshouldberetainedforfuturereference.
HEED WARNINGS — All warnings on the product and
in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS — All operating and use
instructions should be followed.
SERVICING — Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
CLEANING — The product should be cleaned only with
a polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzine, insecticides or other volatile
liquids since they may corrode the cabinet.
•
If this product is equipped with
a
three-wire
DAMAGEREQUIRINGSERVICE - Unplugthisproduct
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
groundingtypeplug,aplughavingathird(grounding)
pin, itwillonlyfitintoagroundingtypepoweroutlet.
Thisisasafetyfeature.Ifyouareunabletoinsertthe
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug.
•
•
When the power-supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into
the product.
ATTACHMENTS
—
Do not use attachments not
recommendedbytheproductmanufacturerasthey
may cause hazards.
WATER AND MOISTURE — Do not use this product
near water — for example, near a bathtub, wash
bowl,kitchensink,orlaundrytub;inawetbasement;
or near a swimming pool; and the like.
ACCESSORIES — Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only
•
•
If the product has been exposed to rain or water.
Iftheproductdoesnotoperatenormallybyfollowing
theoperatinginstructions.Adjustonlythosecontrols
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its
normal operation.
POWER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs,conveniencereceptacles,andthepointwhere
they exit from the product.
OUTDOOR ANTENNA GROUNDING — If an outside
antennaorcablesystemisconnectedtotheproduct,
be sure the antenna or cable system is grounded so
astoprovidesomeprotectionagainstvoltagesurges
andbuilt-upstaticcharges.Article810oftheNational
ElectricalCode,ANSI/NFPA70,providesinformation
with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirementsforthegroundingelectrode.SeeFigure
A.
LIGHTNING — For added protection for this product
duringalightningstorm,orwhenitisleftunattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power-line surges.
POWER LINES —An outside antenna system should
notbelocatedinthevicinityofoverheadpowerlines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING — Do not overload wall outlets,
extensioncords,orintegralconveniencereceptacles
as this can result in a risk of fire or electric shock.
•
•
If the product has been dropped or damaged in any
way.
When the product exhibits a distinct change in
performance — this indicates a need for service.
with
a
cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the
manufacturer.
REPLACEMENT PARTS -- When replacement parts
arerequired,besuretheservicetechnicianhasused
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorizedsubstitutionsmayresultinfire,electric
shock, or other hazards.
SAFETY CHECK - Upon completion of any service or
repairs to this product, ask the service technician to
performsafetycheckstodeterminethattheproduct
is in proper operating condition.
WALL OR CEILING MOUNTING — The product should
not be mounted to a wall or ceiling.
HEAT —The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce
heat.
CART — A product and cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart
combination to overturn.
VENTILATION — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
POWER SOURCES —This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your product
dealer or local power company.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
LOCATION – The appliance should be installed in a
stable location.
NONUSE PERIODS – The power cord of the appliance
should be unplugged from the outlet when left un-
used for a long period of time.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
©American Audio®
-
-
Instruction Manual Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Safety Precautions
D
D
• The DLS 15™ and the DLS 15P™ loudspeakers can easily reproduce sound pressure levels
(SPL) sufficient enough to cause sever and permanent hearing damage. A great degree of care
should be taken to protect your ears to prolong exposure to SPL in excess of 85dB.
• For adult use only - Keep out of the reach of children.
• Be sure all power is turned off before making speaker connections
• Do not remove the speaker cover or grill under any conditions
• Always use a power cord that meets the manufactures exact power specifications
• Disconnect from main power before making any type of connection
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
• This speaker is intended for indoor use only, use of this product outdoors voids all warranties.
• Always mount this speaker in safe and stable matter.
• Power Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the mixer.
• Heat -The speaker should be situated away from heat sources such as radiators, heat registers,
stoves, or other mixers (including amplifiers) that produce heat
• Be sure to save the packing carton in the event the unit needs to be returned for service
• Read all documentation before attempting to operate your new mixer. Please save all your docu-
mentation for future reference
• Do not spill water or other liquids in to or on to your speaker
• Be sure that the local power outlet matches that of the required voltage for your speaker.
• Do not attempt to operate this speaker if the power cord has been frayed or broken. Please route
your power cord out of the way of foot traffic
• Always have the gain controls set to their lowest level during initial power-up to prevent
speaker damage
• Servicing - The user should not attempt to service the speaker beyond that described in this
manual. All other servicing should be referred to qualified service personnel. The speaker should
only be serviced by qualified personal when;
A. Objects have fallen, or liquid has been spilled into the speaker
B. The speaker has been exposed to rain or water
C. The speaker does not appear to operate normally or exhibits a change in performance
D. The terminal/cross-over plate has been damaged
LS 15™/ LS 15P™
D
DLS 15™ Speaker System:
Main Features
D
DLS 15P™ Speaker System:
• Heavy Duty Polypropylene Cabinet
• Dual 1/4” Phono Jack Connections
• Dual Speakon Type Connections
• Built-in Rigging Points
• Heavy Duty Polypropylene Cabinet
• Built in XLR & 1/4” Mic and Line Level Inputs
• XLR and RCA Balanced Inputs
• Built-in Rigging Points
• LED Peak Indicator
• 1/4” and XLR Line Outputs
• Built-in Pole Mount Socket
• Built-in Pole Mount Socket
• High Output Two-Way System
• In and Out Jacks for Parallel Connections
• 225 Watts RMS - 900 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
• Bass and Treble Tone Controls
• Clip and Power LEDs
• 300 Watts RMS - 1000 Watts Peak Power
• Built-in Heavy Duty Carrying Handle
• Attached heavy Duty Rubber Feet
©American Audio®
-
-
Instruction Manual Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™™
Registration
D
D
The DLS 15™ and the DLS 15P™ carry a one year (365 days) limited warranty. Please fill out the
enclosed warranty card to validate your purchase. All returned service items whether under warranty
or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. num-
ber must be clearly written on the outside of the return package. A brief description of the problem as
well as the R.A. number must also be written down on a piece of paper and included in the shipping
container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice.
You may obtain a R.A. number by contacting customer support at (800) 322-6337. All packages
returned to the service department not displaying a R.A. number on the outside of the shipping pack-
age will be returned to the shipper unopened.
The serial and model number for this unit is located on the rear panel Please write down the num-
bers here and retain them for future reference.
Model No.________________________________
Serial No.________________________________
Date Purchased___________________________
Dealer Name______________________________
LS 15™/ LS 15P™
Available Accessories
D
D
APX-B - Speaker Carry Case - A rugged gig bag with
rollers, an adjustable pull out handle, and a heavy duty
zipper. Designed to protect your speaker from damage
and the environment during transportation and stor-
age.
Z-APX/B 7 Z-APX/H - Speaker Rigging Hardware -
American Audio® carries an assortment of rigging hard-
ware specially designed to work with the DLS 15™ and
the DLS 15P.™ The Z-APX/B is a heavy-duty bolt and
may be used to secure the speaker to a cable or chain.
The Z-APX/H is a heavy-duty eyebolt and is used to
suspend or secure the speaker using safety cables.
SPS-1B - Speaker Stands - American Audio® carries two types of speak-
er stands that may be used to raise the speakers during use. The SPS-1B
is a sturdy aluminum tri-pod and includes a mounting socket bracket for
added security. The SPS-1B can raise the speaker to a maximum height
of six feet and has a maximum weight capacity of 80 pounds. SPS-1B;
weight = 6lbs, pipe diameter - 1 3/8”
©American Audio®
-
-
Instruction Manual Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Controls and Features
D
D
DLS 15™ & DLS 15P™
5
6
1
2
D
L
S
1
5
7
8
I N
P
U
T
O
U
T
P
U
T
3
9
4
6
10
3
1. HIGH FREQUENCY TRANSDUCER – This unit is used to reproduce the high frequency
response.
2. 15” WOOFER – The high-powered 15” woofer is used to reproduce the midrange and low
frequencies.
3. RUBBER FOOT – The speaker includes heavy-duty rubber feet on the bottom of the unit.
These feet are used to secure a speaker to another when stacking. They are also used to
secure the speaker to the ground to prevent it from shifting during heavy bass reproduction.
4. POLE MOUNT SOCKET – This socket is designed to fit a standard speaker pole mount or tri-
pod such as the American Audio® SPS-1B speaker stand.
5. STACKING NOTCHES – These notches are designed to line up with the rubber feet of another
DLS 15P™ and are used to support another speaker when they are stacked together.
6. RIGGING POINTS – The DLS 15™ and the DLS 15P™ each include four rigging points. These
points are to be used to “fly” or suspend the speaker in the air by some means. Be sure to
follow the “flying” outlines on page 15.
7. TRANSPORT HANDLE – The DLS 15™ and the DLS 15P™ with built-in heavy-duty transpor-
tation handle. Be sure to carry the speaker by the handle for secure and easy transportation.
©American Audio®
-
-
Instruction Manual Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
D
Controls and Features
D
Rear Panel (DLS 15™ Only):
8. SPEAKON CONNECTIONS – The speaker includes a pair of Speakon type connections. You
may use both connections at once to loop speakers. These Be sure to use either the Speakon
type input connector or the 1/4” Phono input connector, never use more than one input con-
nection at once. The Speakon connectors have a pin 1+ (hot) and 1- (ground) configuration,
pins 2+ and 2- are not used. For more wiring information regarding the Speakon connectors
see page 17.
9. 1/4” PHONO JACKS – The speaker includes a pair of standard 1/4” phono jacks. These jacks
are used for signal input and output. These jacks comes with a special locking clip that must
be pressed in to release the input plug, this features secures the input plug during heavy bass
response. The 1/4” jack has a tip positive and sleeve negative configuration.
10.POLE MOUNT LOCKING PIN – This pin is used to secure the speaker in place when mounting
the speaker in a pole mount configuration. Always be sure to tighten down on the locking pin
to prevent the speaker from shifting during use.
©American Audio®
-
-
Instruction Manual Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Rear Panel Controls and Features
D
D
Rear of DLS 15P™
11
12
13
14
15
16
17
L IN E
IN
18
19
20
21
22
23
24
25
26
27
28
29
30
Rear Panel:
11. MIC 1/LINE LEVEL XLR INPUT JACK - This jack is used for Microphone 1 and line level
inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines or Samplers should also be connected to the LINE
inputs. Do not connect mixers to this input, use the Balanced XLR or RCA Input (18 or
19) only!
12.1/4” MIC 1/LINE LEVEL INPUT JACK – This jack is used for a Microphone and line level in-
puts. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines, Keyboards or Samplers should also be connected
to LINE inputs.
13.MICROPHONE 1/LINE LEVEL INPUT LEVEL – This knob is used to regulate the output signal
of the microphone or CD player/tape deck that is connected to the Mic/Line Level 1 jack (12 &
13).
14. MIC 2/LIVE LEVEL XLR INPUT JACK - This jack is used for Microphone 2 and line level
inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
©American Audio®
-
-
Instruction Manual Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
D
Rear Panel Controls and Features
D
Rear Panel Cont.:
stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE
inputs. Do not connect mixers to this input, use the Balanced XLR or RCA Input (18 or
19) only!
15.MICROPHONE 2/LINE LEVEL INPUT LEVEL – This knob is used to regulate the output signal
of the microphone and/or cd player/tape deck that is connected to the Mic/Line Level 2 Input
Jack (15 & 17).
16.1/4” MIC 2/LINE LEVEL INPUT JACK – This jack is used for a Microphone and Line Level
inputs. Connect CD players or Tape Decks to LINE inputs. Line level musical instruments with
stereo outputs such as Rhythm Machines or Samplers should also be connected to LINE in-
puts.
17.LINE LEVEL INPUT VOLUME – This knob is used to regulate the output signal of the line level
source connected to the Line Level Input Jacks (18 & 19).
18.BALANCED XLR LINE INPUT – This connection is designed to accept a balanced line input
signal from a mixer or other line level device with a balanced output jack. Use a balanced cable
when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to
connect only line level input devices such as mixers and tape machines to this jack.
19.BALANCED RCA LINE INPUT – This connection is designed to accept a balanced line input
signal from a mixer or other line level device with a balanced output jack. Use a balanced cable
when the signal cable length exceeds 15 feet, this will reduce excessive signal loss. Be sure to
connect only line level input devices such as mixers and tape machines to this jack.
20.OUTPUT VOLUME – This knob is used to regulate the output signal being sent to another DLS
15P™ or other line level input jacks such as a mixer or power amp. (22 & 23).
21.XLR PARALLEL OUTPUT JACK – This jack is used to send the incoming line level signal from
either of the Line Level Inputs Jacks to another DLS 15P™ or other line level input jack such
as a mixer or power amp.
22.1/4” LINE OUTPUT JACK – This jack is used to send the incoming line level signal from either
of the Line Level Inputs Jacks to another DLS 15P™ such as a mixer or power amp.
23.TREBLE CONTROL – This knob is used to regulate the amount treble applied to the output sig-
nal. The maximum amount of treble gain is +12dB and the maximum amount of treble decrease
is -12dB. Turning the knob in a counter-clockwise direction will decrease the amount of treble
applied to a channel signal, turning the knob in a clockwise direction will increase the amount
of treble applied to a channel signal.
24.BASS CONTROL – This knob is used to regulate the amount bass applied to the output sig-
nal. The maximum amount of bass gain is +8dB and the maximum amount of bass decrease
is -12dB. Turning the knob in a counter-clockwise direction will decrease the amount of bass
applied to a channel signal, turning the knob in a clockwise direction will increase the amount
of bass applied to a channel signal.
25. CLIP L.E.D. - When your Mic 1/Mic 2, Line Level or Speaker Levels are distorted or too loud
this L.E.D. will light letting you know to adjust your volume level to a lower setting.
26. POWER LED - This L.E.D. will be lit when you switch on the power.
©American Audio®
-
-
Instruction Manual Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Rear Panel Controls and Features
D
D
27.FUSE HOLDER – This housing stores the 7 amp GMA protective fuse. Always replace with
the exact same type fuse, unless otherwise instructed, by an authorized American Audio®
service technician. Replacing with any other type of fuse than that of the recommended fuse
will void your unit warranty.
28. VOLTAGE SELECTOR SWITCH - Because power supplies vary from location to location a
voltage selector switch has been incorporated in the unit's design. This switch can select a
voltage input of 115v or 230v to accommodate the two major power source. Always be sure
to disconnect the power plug before changing the voltage.
29.MAIN POWER INLET – This connector is used to supply main power to the unit via the in-
cluded detachable power cord. The power connection uses an I.E.C. type connector, use only
the supplied polarized AC power cord. Use only a power cord that matches this type of con-
nection. Be sure to only connect this unit to a power outlet that matches the printed power
label on the unit. Never use a power when the ground prong has been removed or broken off.
The ground prong is used to reduce the risk of electrical shock in case of an electrical short.
This cord is designed to fit in one direction only. Do not attempt to force a cord if it does not
fit, be sure the cord is being inserted properly.
30.MAIN POWER SWITCH – This is the main power ON/OFF button. A yellow LED directly above
the power switch will glow indicating power is ON. Before main power is applied, be sure you
have made all connections to the speaker. Remember to avoid damaging pops to the speakers,
the mixer is turned on first and turned off last.
©American Audio®
-
-
Instruction Manual Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Typical Speaker Set-Up
D
D
Typical DLS 15P™ Output Set-Up
AUX
4
AUX / IN
MODEL NO.: Q-3433 MKII
POWER SOURCE:
115/230V~ 50/60Hz 20W
MADE IN CHINA
MIN
MAX
TRIM OUTPUT
XLR-XLR Balanced Cables
DLS 15P™
DLS 15P™
©American Audio®
-
-
Instruction Manual Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Typical Speaker Set-Up
D
D
Typical DLS 15™ Output Set-Up
AUX
4
AUX / IN
MODEL NO.: Q-3433 MKII
POWER SOURCE:
115/230V~ 50/60Hz 20W
MADE IN CHINA
MIN
MAX
TRIM OUTPUT
XLR-XLR Balanced cables
V4000 Amplifier
Speaker Cables
©American Audio®
-
-
Instruction Manual Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Looping Speakers
D
D
DLS 15P™ Looping
From Mixer
To Next DLS 15P™ (If Applicable)
©American Audio®
-
-
Instruction Manual Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Looping Speakers
D
D
DLS 15 Looping
From Amplifier
D
L S
1
5
D
L S
1
5
O
U
T
P
U
T
I N
P
U
T
O
U
T
P
U
T
I N
P
U
T
To Next Speaker (If Applicable)
©American Audio®
-
-
Instruction Manual Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Rigging and Mounting Options
D
D
Speaker Rigging Hardware – The DLS 15™ and the DLS 15P™ may be permanently installed
or mounted using any of the many available third party wall brackets and ceiling mounts available.
Always be sure to follow all safety instructions and guidelines included with the mounting hardware
for safe and proper installation. American Audio® carries an assortment of rigging hardware specially
designed to work with the DLS 15™ and the DLS 15P.™ The Z-APX/B is a heavy-duty bolt and may
be used to secure the speaker to a cable or chain. The Z-APX/H is a heavy-duty eyebolt and is used
to suspend or secure the speaker using safety cables. Please contact your dealer for more informa-
tion and availability.
Rigging Points – The DLS 15™ and the DLS 15P™ include four
rigging points. These points are detailed on page six. The rigging
points are used to “fly” or suspend the speaker in the air by some
means.
Pole Mounting – The DLS 15™ and the DLS 15P™ also include a
pole mount option. The pole mount socket located on the bottom of the
speaker may be used to secure the speaker to a speaker tri-pod, such as
the American Audio® SPS-1B as illustrated on the left. Always be sure to
follow the guidelines listed below when pole mounting your speaker;
• Always be sure the stand is designed to support the weight of
the speaker
• In outdoor situations that are prone to windy conditions and
strong wind gust, be sure to use sandbags as additional tri-pod
support, this will greatly reduce the risk of tipping
• Do not stack speakers on top of each other when mounting on
a tri-pod. Only one speaker should be mounted to a tri-pod at one
time.
• Always position the tri-pod legs away from foot traffic
• Extend the tri-pod legs to their fully extended position to avoid
accidental tipping
• Observe and follow all safety guidelines and regulations specified
by the tri-pod’s manufacturer
• Be sure the tri-pod is situated on a flat, level, and stable surface
• Always tighten all tri-pod locks
Pole Mount Locking Screw – This screw is located on the rear of
the speaker and is attached to the pole mount socket. Always use this
screw to secure the speaker in place when mounting this speaker in a
pole mount configuration. Always be sure to tighten down on this screw
to prevent the speaker from shifting directions during use.
©American Audio®
-
-
Instruction Manual Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™™
Frequency Specifications
D
D
LS 15™/ LS 15P™
D
Frequency Response
D
©American Audio®
-
-
Instruction Manual Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Speakon Assembly
D
D
SPEAKON ASSEMBLY: You will need a pair of Neutrik Speakon® NL4FC connectors. You will also
need high-quality two or four conductor speaker cable, a pair of needle-nosed pliers and a 1.5-
mm Allen key to assemble the Speakon connectors to your speaker wire. To assemble the Neutrik
Speakon NL4FC connector, complete the following steps:
1. Strip back 3 /4-inch of the cable casing. Strip off 1
Figure 10
/4-inch from the end of each of the conductors down
to bare wire, and insert the brass fittings ( Figure
10).
Brass Inserts
4-Conductor Speaker Cable
2. Slide the cable tension clip (D) and the speakon
coupler (E) through the cable end. See figure 11.
3. Insert each wire with the brass fittings into the
top of appropriate slot of the connector insert (B) as
shown in figures 11 and 12. Use a 1.5-mm Allen key
to tighten the connection (Figure 12).
Figure 11
4. Be sure to properly match the positive (+) and
negative (–) leads of each wire (Figure 13).
A
B
C
D
E
5. Slide the connector insert (B) into the connector
housing (A), making sure that the large notch on the
outer edge of the insert lines up with the large groove
on the inside of the connector housing. The insert
should slide easily through the housing and out the
other side until it extends approximately 3 /4-inch
from the end of the housing.
Figure 12
6. Slide the cable tension clip (D) along the cable and
insert into the housing (A), making sure that the large
notch lines up with the large groove on the inside of
the connector housing (A). The cable tension clip (D)
should slide easily into the housing until only 3 /8-
inch of the cable tension clip (D) extends from the
back end of the connector.
Figure 13
INPUT BAANCE
SPEAKON 1+ HOT
1
COLD
UTPUTS
C
2
C
1
-
+
+2
+1
-1
+2
+1
7. Slide the coupler (E) along the cable and screw it
onto the end of the housing (A). Before tightening,
you may want to test the connector to make sure it
has been assembled properly.
+2
-1
+2
+
©American Audio®
-
-
Instruction Manual Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Warranty
D
D
1-YEAR LIMITED WARRANTY
A. American Audio® hereby warrants, to the original purchaser, American Audio® products to be
free of manufacturing defects in material and workmanship for a period of 1 Year (365 days) from
the date of purchase. This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s responsibility to
establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the American Audio® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the
terms of this warranty, American Audio® will pay return shipping charges only to a designated
point within the United States. If the entire instrument is sent, it must be shipped in its original
package. No accessories should be shipped with the product. If any accessories are shipped
with the product, American Audio® shall have no liability whatsoever for loss of or damage to
any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified
in any manner which American Audio® concludes, after inspection, affects the reliability of the
product; if the product has been repaired or serviced by anyone other than the American Audio®
factory unless prior written authorization was issued to purchaser by American Audio®; if the
product is damaged because not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or peri-
odic check-up. During the period specified above, American Audio® will replace defective parts
at its expense, and will absorb all expenses for warranty service and repair labor by reason of
defects in material or workmanship. The sole responsibility of American Audio® under this war-
ranty shall be limited to the repair of the product, or replacement thereof, including parts, at the
sole discretion of American Audio®. All products covered by this warranty were manufactured
after January 1, 1990, and bear identifying marks to that effect.
E. American Audio® reserves the right to make changes in design and/or improvements upon its
products without any obligation to include these changes in any products theretofore manufac-
tured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory sup-
plied with products described above. Except to the extent prohibited by applicable law, all
implied warranties made by American Audio® in connection with this product, including warran-
ties of merchantability or fitness, are limited in duration to the warranty period set forth above.
And no warranties, whether expressed or implied, including warranties of merchantability or
fitness, shall apply to this product after said period has expired. The consumer’s and or Dealer’s
sole remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall American Audio® be liable for any loss or damage, direct or consequential,
arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American Audio® Products and super-
sedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.
©American Audio®
-
-
Instruction Manual Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™
Technical Specifications
D
Model:
American Audio®DLS 15™ - Passive Professional Two-
Way Sound Reinforcement Loudspeaker
Speaker Section:
Dimensions:
Weight:
13.58” x 16.53” x 26.37” / 4344mm x 419mm x 669mm
56 Lbs. / 25.5 kgs
Environmental conditions:
Operational temperature: 5 to 35˚C (41 to 95˚F)
Operational humidity:
Storage temperature:
40 - 20 KHz
25 to 85% RH (non-condensation)
-20 to 60˚C (4 to 140˚F)
Frequency Response:
Crossover:
3,500 Hz
Impedance:
8 Ohms
Power Capacity:
Input Sensitivity:
225 Watts RMS - 900 Watts Peak
103dB/m/w
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
©American Audio®
-
-
Instruction Manual Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
LS 15™/ LS 15P™
Model:
Technical Specifications
American Audio® DLS 15P™ - Professional
D
D
Powered Sound Reinforcement Loud Speaker
Speaker Section:
Dimensions:
Weight:
13.58” x 16.53” x 26.37” / 344mm x 419mm x 669mm
61 Lbs. / 28 kgs
Environmental conditions:
Operational temperature: 5 to 35˚C (41 to 95˚F)
Operational humidity:
Storage temperature:
40KHz - 20KHz (-3dB)
3,500 HZ
25 to 85% RH (non-condensation)
-20 to 60˚C (4 to 140˚F)
Frequency Response:
Crossover:
Nominal Dispersion:
90˚ x 50˚ (HXV)
Amplifier Section:
Power supply:
Power consumption:
Accessories:
AC 115v/230v, 50/60Hz
12 Watts Typical
I.E.C. Power Cord, 2 Floor Monitor Brackets
Input Sensitivity (Note; Level/Impedance: 0dBV = 1V RMS)
Line:
10K ohms input impedance
70mV RMS Sensitivity for 0dBm Output
10K Ohms input Impedance Unbalanced
1.0mV RMS Sensitivity for 0dBm Output
500mV RMS Max Input, Output Sensitivity
Microphone:
Output Sensitivity:
Master Output:
109 dB/m/w
9V RMS Maximum
Frequency Response:
Line:
Microphone:
20Hz-22KHz +/-0.5dB
20Hz-15KHz +/-0.5dB
Signal to Noise Ratio (Maximum Output):
Line:
Better than 94dB
Microphone:
Better than 76dB
THD - Total Harmonic Distortion:
Master Output:
Less than 0.1%
Channel Equalizer:
Bass:
Treble:
+15dB/-30dB @ 100Hz
+15dB/-30dB @ 12KHz
NOTES:
The specifications are subject to change to any improvement by negotiations in advance.
The parts are subject to change to any improvement within the range of the specifications.
©American Audio®
-
-
Instruction Manual Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
©American Audio
A Division of the American DJ Group of Companies
American Audio World Headquarters:
4295 Charter Street
Los Angeles, CA 90058 USA
Tel: 323-582-2650 Fax: 323-582-2610
Download from Www.Somanuals.com. All Manuals Search And Download.
|