R
EN
®
MP3 CD RECEIVER WITH BLUETOOTH
CDE-125EBT
• OWNER’S MANUAL
Please read before using this equipment.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Shinagawa-ku,
Sul Naviglio (MI), Italy
Tokyo 141-0031, Japan
Phone 03-5496-8231
Phone 03-8787-1200
Phone 02-484781
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München,
Germany
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 089-32 42 640
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 02-725-13 15
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd.
Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)
68-16909Z39-A
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Sound Setting
Contents
Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/
Fader (Between Front and Rear)/Defeat .....12
Operating Instructions
WARNING
Setting the Bass Control .................................12
Setting the Treble Control ...............................12
Adjusting the High Pass Filter ........................13
Turning Loudness On/Off ...............................13
WARNING ................................................. 3
CAUTION .................................................. 3
PRECAUTIONS ........................................ 3
CAUTION .................................................. 5
Other Functions
Displaying the Text .........................................13
Displaying Time .............................................14
Using the Front AUX Input Terminal .............14
Getting Started
Accessory List .................................................. 6
Turning Power On and Off ............................... 6
Detaching and Attaching the Front Panel ........ 6
Initial System Start-Up ..................................... 6
Adjusting Volume ............................................. 6
Lowering Volume Quickly ............................... 6
Setting Time ..................................................... 7
SETUP
BLUETOOTH Setting
Setting the BLUETOOTH Connection
(BT IN) .........................................................15
Sound Customizing
Subwoofer On and Off .....................................15
Setting the Subwoofer System .........................15
Radio
Listening to Radio ............................................ 7
Presetting Stations Manually ............................ 7
Presetting Stations Automatically .................... 8
Tuning to Preset Stations .................................. 8
Visual Customizing
Dimmer Control ...............................................15
Scroll Type Setting ...........................................15
Scroll Setting (TEXT SCR) ..............................15
Demonstration ..................................................15
CD/MP3
MP3
Playing MP3 Data (PLAY MODE) ..................16
Playback ........................................................... 8
Repeat Play ....................................................... 9
M.I.X. (Random Play) ...................................... 9
Searching for CD Text .................................... 10
External Device
Connecting to an External Amplifier
(POWER IC) .................................................16
Setting the AUX+ SETUP Mode .....................16
Setting the AUX NAME mode .........................16
File/Folder Name Search
(concerning MP3) ....................................... 10
Quick Search .................................................. 10
About MP3 ..................................................... 10
1-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BT Hands-Free Calling
iPod/iPhone (Optional)
Setup Before Using ......................................... 17
About BLUETOOTH .................................. 17
Before Using Hands-Free Function ............ 17
How to connect to a BLUETOOTH
Playback ..........................................................22
Searching for a desired Song ..........................22
Quick Search ...................................................22
Direct Search Function ....................................23
compatible device (Pairing) ..................... 17
Select Playlist/Artist/Album/
Genre/Composer ..........................................23
BLUETOOTH SETUP ................................... 17
BLUETOOTH Setup Operation .................. 17
Setting the BLUETOOTH Device ...................17
Setting the Search Mode ..................................18
Setting the Received Calls automatically
(Auto Answer) ..............................................18
Deleting a BLUETOOTH Device
Random Play Shuffle (M.I.X.) ........................23
Repeat Play .....................................................24
Displaying the Text .........................................24
Information
from the list ..................................................18
Displaying the phone service
In Case of Difficulty ........................................24
Specifications ..................................................27
provider name ...............................................18
Adjusting the volume for the
microphone input .........................................18
Selecting the output speaker ............................18
Displaying the firmware version ......................18
Updating the firmware .....................................18
Installation and Connections
Warning ...................................................28
Caution ...................................................28
Precautions ............................................28
Hands-Free Phone Control ............................. 18
About the Hands-Free Phone ...................... 18
Answering a Call ......................................... 19
Hanging up the Telephone ........................... 19
Redial Function ........................................... 19
Calling ......................................................... 19
Redialing a Number In Outgoing History ........19
Dialing a Number In Incoming History ...........19
Dialing a Number In Incoming Missed
Installation .......................................................29
Mounting the Microphone ..............................29
Connections .....................................................30
Call History ..................................................19
Dialing a Number In The Phone Book ............19
Phone Book Alphabet Skip ..............................19
Voice Dial Operation ...................................... 20
Adjusting the volume when receiving
a Call ........................................................... 20
Call Switching Operation ............................... 20
USB memory (Optional)
Playing MP3 Files with the USB memory
(Optional) .................................................... 20
USB Memory Connection (Optional) ............. 21
About MP3 File of USB Memory .................. 21
2-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
WARNING
Doing so may result in personal injury or damage to the product.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
PRECAUTIONS
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Product Cleaning
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Moisture Condensation
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
result in fire, etc.
a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
3-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Make sure this unit will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
INCORRECT
CORRECT
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Disc Cleaning
New Discs
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Centre Hole
Centre Hole
New Disc
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diametre of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Outside
(Bumps)
Bumps
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Transparent Sheet
Disc Stabilizer
4-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.
is lost while using this product.
On Handling USB Memory
To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
Fix the USB memory in a location where driver operation will
not be hindered.
•
•
•
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
•
If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalised).
Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
•
•
•
USB memory may not function correctly at high or low temperature.
The USB flash memory supports only 512 or 2,048 bytes per
sector.
About media that can be played
Use only compact discs with the label side showing the CD logo
•
•
•
Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or state.
USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.
Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
A file that is copy-protected (copyright protection) cannot be
played back.
USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
The unit can play back “mp3” file extensions.
Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognised. The resulting playback
may contain noise that can damage speakers and/or amplifiers.
It is recommended to back up important data on a personal computer.
Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
marks below.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs
(CD-ReWritables) which have been recorded only on audio
devices.
•
•
You can also play CD-Rs/CD-RWs containing MP3 formatted
audio files.
•
•
•
Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
Use discs with MP3 files written in a format compatible with this
unit. For details, see pages 10-11.
•
•
•
•
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
•
•
ROM data other than audio files contained in a disc will not
produce sound when played back.
“Made for iPod,” and “Made for iPhone,” mean that an
electronic accessory has been designed to connect specifically to
iPod, or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards.
Protecting the USB connection terminal
•
Only USB flash memory devices can be connected to the USB
connection terminal on this unit. Correct performance using
other USB products cannot be guaranteed. A USB hub is not
supported.
•
The BLUETOOTH® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Alpine Electronics, Inc. is under licence.
“MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
•
•
•
•
Do not connect a USB memory over 20 mm wide. Also, avoid
connecting USB memory and Front Aux at the same time.
If a USB device is inserted in the unit, it projects out and may be
a danger while driving. Use a commercially available USB
extension cable, and connect it in a safe way.
“Supply of this product only conveys a licence for private,
non-commercial use and does not convey a licence nor imply any
right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent licence for such use is required.
•
Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
The audio file format that can be played back on the unit is MP3.
Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
•
•
5-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching
Getting Started
1
2
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Rotary encoder
Push the left side of the front panel until it locks
firmly into the main unit.
SOUND/SETUP
SOURCE/
(Release)
/MUTE
/
/ENT
•
•
Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
Accessory List
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
•
•
•
•
•
•
•
•
Head unit ............................................................................1
Power cable........................................................................1
Microphone (4m)................................................................1
Mounting sleeve.................................................................1
Carrying case.....................................................................1
Bracket key.........................................................................2
Screw (M5 × 8)....................................................................4
Owner’s Manual .......................................................... 1 set
1
2
3
Turn off the unit power.
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar pointed
object.
Turning Power On and Off
Press SOURCE/ to turn on the unit.
•
The unit can be turned on by pressing any other button except
(Release).
and
Press and hold SOURCE/ for at least 2 seconds to
turn off the unit.
RESET switch
•
The first time power is turned on, the volume will start from level 12.
Adjusting Volume
Detaching and Attaching the Front Panel
Turn the Rotary encoder until the desired sound is
obtained.
Detaching
1
2
Turn off the unit power.
Lowering Volume Quickly
Press
(Release) at the lower left side until the
front panel pops out.
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
3
Grasp the left side of the front panel and pull it out.
Press
/MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
/MUTE again will bring the audio back to its
previous level.
•
The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
•
•
To protect the front panel, place it in the supplied carrying case.
When detaching the front panel, do not apply excessive force as it
may result in malfunction.
6-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Time
Radio
1
2
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
SOURCE/
BAND
Turn the Rotary encoder to select the CLOCK ADJ
mode, and then press
/
/ENT.
The time indication will blink.
3
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
4
5
When the hour has been adjusted, press
/
/ENT.
TUNE/A.ME
Preset buttons
(1 through 6)
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
6
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
Listening to Radio
•
To synchronise the clock to another clock/watch or radio time
announcement, press and hold
/
/ENT for at least 2 seconds
1
2
Press SOURCE/ to select TUNER mode.
after setting the “hour.” Minutes will reset to “00”. If the display
shows over “30” minutes when you do this, the time will advance one
hour.
Press BAND repeatedly until the desired radio band
is displayed.
•
•
Pressing
/MUTE will return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
F1 (FM1)
F2 (FM2)
AM
F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
Controllable with Remote Control
OFF (Manual mode)
DX SEEK
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the
remote-control sensor.
•
The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Remote control sensor
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
Holding down
continuously.
or
to tune in the desired station.
or
will change the frequency
Presetting Stations Manually
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
•
•
A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
7-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Stations Automatically
CD/MP3
1
2
Press BAND repeatedly until the desired radio band
is displayed.
SOURCE/
Rotary encoder
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
1
2
VIEW
/MUTE
4 5
•
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
/
/ENT
/ESC
Tuning to Preset Stations
Playback
1
2
Press BAND repeatedly until the desired band is
displayed.
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
” indicator lights up .
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
“
The display shows the band, preset number and frequency
of the station selected.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
The mode will change every time the button is pressed.
1
2
TUNER
AUX*
DISC
TUNER
USB AUDIO
iPod* /AUX+*
3
1
* Displayed only when the iPod/iPhone is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 16).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 16).
* Refer to “Using the Front AUX Input Terminal” (page 14).
3
2
While playing back MP3, press 1
the desired folder.
or
2 to select
Pressing and holding 1
or
2 will change folders
continuously.
8-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode:
3
Press
or
to select the desired track (file).
Returning to the beginning of the current track (file):
Press
.
: Only a track is repeatedly played back.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
MP3 mode:
Press
.
Fast forward:
: Only a file is repeatedly played back.
Press and hold
.
4
To pause playback, press
/
/ENT.
: Only files in a folder are repeatedly played back.
Pressing /ENT again will resume playback.
/
5
•
To eject the disc, press
.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
M.I.X. (Random Play)
•
•
•
•
•
If the CD does not eject, press and hold
for at least 2 seconds.
The “
” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs cannot be used.
Press 5
in the play or pause mode.
The CD-player can play discs containing audio data and MP3 data.
The track display for MP3 data playback is the file numbers recorded
on the disc.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
again.
•
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
CD mode:
MP3 Play Display
The folder number and file number will be displayed as
described below.
: The tracks are played back in random sequence.
F101 T103
MP3 mode:
Folder number File number
: Only files in a folder are played back in
random sequence.
display
display
•
Press VIEW to switch the display. See “Displaying the Text”
(page 13) for information about display switching.
: The files are played back in random sequence.
Repeat Play
Press
played.
4 to play back repeatedly the track being
* In the USB mode, all files stored in the USB memory are played back
in random sequence, and the “
” indicator lights up.
The track (file) will be played repeatedly.
Press
4 again and select off to deactivate repeat play.
9-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for CD Text
Quick Search
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
You can search for tracks (files).
1
Press and hold
CD/MP3 mode to activate Quick Search mode.
/ESC for at least 2 seconds in the
The “ ” indicator lights up.
1
2
Press
/ESC during play.
This will set the search mode, and the “
up.
” indicator lights
2
Turn the Rotary encoder to select a desired track
(file).
The selected track is played back immediately.
Turn the Rotary encoder to select the desired
track, and then press /ENT.
This will play the selected track.
/
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
•
•
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
About MP3
File/Folder Name Search
(concerning MP3)
CAUTION
Except for private use, duplicating audio data (including MP3
data) or distributing, transferring, or copying it, whether for free
or for a fee, without permission of the copyright holder is strictly
prohibited by the Copyright Act and by international treaty.
Folder and file names may be searched and displayed during playback.
1
2
During MP3 playback, press
search mode.
The “ ” indicator lights up.
/ESC to activate the
What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, and then
press
/
/ENT.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realises such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
Folder Name Search mode
3
Turn the Rotary encoder to select the desired
folder.
Method for creating MP3 files
4
Press and hold
play back the first file in the selected folder.
/
/ENT for at least 2 seconds to
Audio data is compressed using software with MP3 codecs. For
details on creating MP3 files, refer to the user’s manual for that
software.
MP3 files that are playable on this device have the file
extensions “mp3”. Files with no extension cannot be played
back.
•
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
•
•
To search for files in the Folder Name Search mode, press
/
/ENT. Files in the folder may be searched.
Press
/MUTE to exit Folder Name Search mode in step 3 in order
to select File Name Search mode.
•
•
The root folder is displayed as “ROOT”.
When Folder Name Search is made during M.I.X. play, the M.I.X.
play mode will be cancelled.
File Name Search mode
3
4
Press 1
or
2 to select another Folder.
Select the desired file by turning the Rotary
encoder.
5
•
Press
/
/ENT to play back the selected file.
Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
•
•
Press
/MUTE in the search mode to return to the previous mode.
When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
10-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported playback sampling rates and bit rates
Order of files
Files are played back in the order that the writing software writes
MP3
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
8 - 320 kbps
This device may not play back correctly depending on sampling
rates.
ID3 tags
Root folder
This device supports ID3 tag v1 and v2.
If tag data is in an MP3 file, this device can display the title
(track title), artist name, and album name ID3 tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags) and the underscore. For non-
supported characters, “NO SUPPORT” is displayed.
If information contains characters other than ID3 tag information,
the audio file may not be played back.
The tag information may not be correctly displayed, depending
on the contents.
Producing MP3 discs
MP3 files are prepared, then written to a CD-R or CD-RW using
CD-R writing software. A disc can hold up to 510 files/folders
(including Root Folders), and the maximum number of folders is
255.
Playback may not be performed if a disc exceeds the limitations
described above.
Media supported
Folder
MP3 File
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
* The folder No./ folder Name will not be displayed if no file is
contained in the folder.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Terminology
Bit rate
Under the ISO9660 standard, there are some restrictions to
remember.
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Sampling rate
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Formats supported
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3 files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
11-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Bass Control
Sound Setting
You can change the Bass Frequency emphasis to create your own tonal
preference.
Rotary encoder (AUDIO/LOUD)
SOURCE/
BAND
1
Press SOUND/SETUP repeatedly to select the
BASS mode.
BASS
TREBLE
HPF
BASS
Setting the Bass Centre Frequency
2-1 Press BAND to select the desired bass centre
frequency.
/ESC
SOUND/SETUP
80 Hz
100 Hz
200 Hz
60 Hz
80 Hz
Emphasises the displayed bass frequency ranges.
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
Setting the Bass Bandwidth
2-2 Press SOURCE/ to select the desired bass
bandwidth.
1
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the centre frequency. A narrower setting will
boost only frequencies near the centre frequency.
Each press changes the mode as follows:
SUBWOOFER*
BASS LEVEL
TRE LEVEL
VOLUME
BALANCE
FADER DEFEAT
SUBWOOFER
Subwoofer: +0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance: L15 ~ R15
Fader: R15 ~ F15
Defeat: ON/OFF
Setting the Bass Level
1
2-3* Turn the Rotary encoder to select the desired
bass level (–7~+7).
You can emphasise or weaken the bass level.
Volume: 0 ~ 35
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
If no operation is performed for 5 seconds after selecting the
SUBWOOFER, BASS LEVEL, TRE LEVEL, BALANCE, FADER or
DEFEAT mode, the unit automatically returns to normal mode.
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of
BASS LEVEL and TRE LEVEL will return to the factory
defaults.
•
The function is inoperable when DEFEAT is set to ON.
1
* The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal
preference.
1
Press SOUND/SETUP repeatedly to select the
TREBLE mode.
BASS
TREBLE
HPF
BASS
12-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Treble Centre Frequency
Other Functions
2-1 Press BAND to select the desired treble centre
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
SOURCE/
Emphasises the displayed treble frequency ranges.
Setting the Treble Level
2
2-2* Turn the Rotary encoder to select the desired
treble level (–7~+7).
You can emphasise the treble level.
VIEW
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3 files.
•
The function is inoperable when DEFEAT is set to ON.
2
* The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
Press VIEW.
The display will change every time the button is pressed.
•
When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
Adjusting the High Pass Filter
The display in Radio mode:
FREQUENCY CLOCK
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
1
Press SOUND/SETUP repeatedly to select the HPF
mode.
1
1
TEXT (DISC NAME)*
TEXT (TRACK NAME)*
TRACK NO./ELAPSED TIME
The display in MP3 mode:
FILE NO./ELAPSED TIME
BASS
TREBLE
HPF
BASS
FOLDER NO./FILE NO.
2
Turn the Rotary encoder to select the desired HPF
frequency.
FILE NO./CLOCK
ARTIST NAME*
FOLDER NAME
ALBUM NAME*
FILE NAME
SONG NAME*
2
2
2
FILE NO./ELAPSED TIME
OFF
60 Hz
80 Hz
100 Hz
The display in AUX mode:
All frequencies above the selected cutoff are output.
AUX NAME
AUX NAME/CLOCK
AUX NAME
3
Press and hold
return to normal mode.
/ESC for at least 2 seconds to
1
* Displayed during playback of a disc with CD text.
* ID3 tag
2
•
•
If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
The function is inoperable when DEFEAT is set to ON.
If an MP3 file contains ID3 tag information, the ID3 tag information
is displayed (e.g., song name, artist name, and album name). All
other tag data is ignored.
Turning Loudness On/Off
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
•
The function is inoperable when DEFEAT is set to ON.
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the indication display
Using the Front AUX Input Terminal
When displaying Text, the following indicators are lit
according to the mode.
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
Indicator/
Mode
MP3/USB
AUDIO Mode
iPod/iPhone
Mode
CD Mode
Press SOURCE/ , and select the AUX mode to listen to
the portable device.
2
Folder Name*
––
––
––
being displayed
1
2
TUNER
TUNER
DISC
USB AUDIO
iPod* /AUX+*
AUX
1
1
Artist Name*
Artist Name*
being displayed being displayed
1
* Displayed only when the iPod/iPhone is connected and
1
1
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 16).
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 16).
Text (Disc
Album Name* Album Name*
3
Name* ) being being displayed being displayed
2
displayed
1
1
Text (Track
Song Name* / Song Name*
Name* ) being File Name being being displayed
displayed displayed
3
Portable player, etc.
Main unit
1
* Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
* The root folder is displayed as “ROOT”.
2
3
* If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
About “Text”
or
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs)
•
•
•
Some characters may not be displayed correctly with this device,
depending on the character type.
“NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Press VIEW repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 13).
•
Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Customizing
SETUP
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
SOURCE/
Rotary encoder (AUDIO) SOUND/SETUP
SUBWOOFER
BALANCE
BASS LEVEL
FADER DEFEAT
TRE LEVEL
VOLUME
SUBWOOFER
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
/
/ENT
/MUTE
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
Visual Customizing
1
2
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
Dimmer Control
DIM AUTO (Initial setting) / DIM MANUAL
Turn the Rotary encoder to select the desired
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
SETUP menu, and then press
(e.g. Select SUBWOOFER)
/
/ENT.
1
BT IN
CLOCK ADJ*
PLAY MODE
POWER IC
DIMMER
BT IN
AUX+ SETUP
2
AUX+ NAME*
SUBWOOFER
SCROLLTYPE
AUX NAME
SUBW SYS*
TEXT SCR
DEMO
Scroll Type Setting
SCR TYPE1 / SCR TYPE2 (Initial setting)
3
Choose from two scrolling methods.
Select the type you prefer.
1
* Refer to “Setting Time” (page 7).
2
* Displayed only when AUX+ SETUP is ON.
3
* Displayed only when SUBWOOFER is ON.
SCR TYPE1: The characters scroll from right to left, a single
character at a time.
3
4
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
SCR TYPE2: Words are built up from left to right, a single
character at a time. When the display is filled, it is
cleared and the remaining words are displayed the
same way until all words of the title have been
shown.
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
•
•
Press
/MUTE to return to the previous mode.
If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Scroll Setting (TEXT SCR)
SCR AUTO / SCR MANU (Initial setting)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3 files, folder
names and tags.
BLUETOOTH Setting
Setting the BLUETOOTH Connection (BT IN)
BT ADAPTER (Initial setting) / BT OFF
SCR AUTO: The CD text information, the text information of
folder and file names, and the tags are scrolled
automatically.
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
SCR MANU: The display is scrolled when a disc is loaded or
when a track is changed, etc.
Set ADAPTER when the BLUETOOTH function is used. For details on
the set up procedure, refer to “BLUETOOTH SETUP” on page 17.
•
The unit scrolls CD text names, folder names, file names or tag
display.
•
If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
•
To quit Demo mode, set to DEMO OFF.
15-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the AUX+ SETUP Mode
AUX+ ON / AUX+ OFF (Initial setting)
MP3
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
Playing MP3 Data (PLAY MODE)
CD-DA (Initial setting) / CDDA/MP3
This unit can play back CDs containing both CD and MP3 data (created
in Enhanced CD (CD Extra) format). However, in some situations,
playback of an enhanced CD may be difficult. In this case, you can
select playback of a single session only, containing the CD data. When a
disc contains both CD and MP3 data, playback starts from the CD data
portion of the disc.
A portable music device and an iPod/iPhone cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod/iPhone is connected.
CD-DA:
Only the CD data in Session 1 can be played back.
You can change the AUX+ name display when AUX+ SETUP is set to
CDDA/MP3: CD data, MP3 files in mixed mode, and multi-
session discs can be played back.
ON. Press
/
/ENT when AUX+ SETUP is set to ON, and select
/ENT.
AUX+ NAME by turning the Rotary encoder, then press
After that, turn the Rotary encoder to select the desired AUX+ name.
/
•
Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
Setting the AUX NAME mode
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE* / GAME
1
2
External Device
You can change the AUX NAME display in the SETUP mode.
Connecting to an External Amplifier (POWER IC)
POW ON (Initial setting) / POW OFF
1
*
*
After the setting is completed, AUX is displayed on the unit.
After the setting is completed, PMD is displayed on the unit.
2
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POW OFF: Use this mode when the line output of this unit is
used to drive an external amplifier. In this setting, the
head unit’s internal amplifier is turned OFF and
cannot drive speakers.
Front
left
Amplifier
Front
right
POW ON: The speakers are driven by the built-in amplifier.
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
•
No sound is produced by the system when the power output is set to
OFF.
16-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
The PIN code (“0000”) is displayed on the connected
unit.
BT Hands-Free
Calling
•
The PIN code is fixed as “0000.”
3
Input the PIN code (“0000”) in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, “CONNECTED” is
displayed, and then the unit returns to normal mode.
Rotary encoder
SOUND/SETUP
/VOICE DIAL
•
The registration number 5 is deleted when you set ignition from ACC
to OFF. If all the 5 positions have been registered, you cannot
register the 6th device. To register another device, you need to delete
one of the device from position 1 to 5 first.
•
If a BLUETOOTH compatible device is successfully connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
2 (ABC)
(ABC)
/MUTE/
1
•
Set “Setting the Search Mode” (page 18) to VISI M ON to enable this
unit to recognise a mobile phone. For mobile phone passkey
(passcode) input operation, refer to the mobile’s Owner’s Manual.
/
/ENT
Setup Before Using
BLUETOOTH SETUP
About BLUETOOTH
BLUETOOTH Setup Operation
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices.
The following steps 1 to 4 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
•
•
While calling, BLUETOOTH Setup operation cannot be performed.
Set “BT IN” to BT ADAPTER, and then perform BLUETOOTH
SETUP operation.
•
•
Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
1
2
Press and hold SOUND/SETUP for at least 2
seconds to activate the SETUP mode.
•
•
•
Turn the Rotary encoder to select the desired
items and then press
/
/ENT.
BT IN PAIRED DEV*
VISIBLE M*
AUTO ANS*
CLEAR DEV*
SPEAKER SL*
SEV NAME* MIC INPUT*
FW VERSION* FW UPDATE*
* When “BT IN” is set to BT ADAPTER, the above items are
displayed.
Before Using Hands-Free Function
Before using the hands-free phone function, the following settings need
to be made.
3
4
Turn the Rotary encoder to change the settings.
Press and hold SOUND/SETUP for at least
2 seconds.
Set “BT IN” to BT ADAPTER (page 15).
The SETUP mode is cancelled.
•
Before using a hands-free phone, it must be paired with this unit.
Refer to “BLUETOOTH SETUP” (pages 17-18).
Setting the BLUETOOTH Device
Select one of 5 connected BLUETOOTH compatible devices that you
previously registered.
How to connect to a BLUETOOTH
compatible device (Pairing)
Setting item: PAIRED DEV
For details on the control from a BLUETOOTH compatible device,
refer to the Owner’s Manual of the BLUETOOTH compatible device.
Turn the Rotary encoder to select a BLUETOOTH
compatible device you want to use (you want to change
connection) and then press
/
/ENT.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
17-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If the connection is successfully changed, “CONNECTED” is
displayed for 2 seconds and the indicator lights up, then the
display returns to the SETUP screen.
Adjusting the volume for the microphone input
You can emphasise or weaken the microphone input volume level.
Setting item: MIC INPUT
Turn the Rotary encoder to select the desired volume level (0~7).
•
•
If you input the wrong passcode or communications fail, “FAILED”
is displayed.
If you want to connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to change to.
The PIN code is fixed as “0000”.
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
Selecting the output speaker
You can select the connected speaker in car to output the sound signal of
telephone.
Setting the Search Mode
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISI M ON.
Setting item: SPEAKER SL
Setting item: VISIBLE M
ALL: The sound be output from all of speakers in car.
F-L: The sound only be output from the front left speaker.
F-R: The sound only be output from the front right speaker.
VISI M ON: Enable recognition of this unit from the
BLUETOOTH compatible device.
F-LR: The sound be output from the front left and front right
VISI M OFF: Disable recognition of this unit from the
speaker.
BLUETOOTH compatible device.
•
The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
•
Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Displaying the firmware version
Setting the Received Calls automatically (Auto Answer)
Setting item: FW VERSION
The current firmware version will be displayed.
When a call is received, you can set whether to receive it automatically
or not.
Updating the firmware
Setting item: AUTO ANS
Setting item: FW UPDATE
AT ANS ON: When a call is received, it is answered
With this setting, the BLUETOOTH firmware update function can be
activated, but other devices and software may be required. For details,
consult ALPINE website.
automatically after about 5 seconds.
AT ANS OFF: When a call is received, it is not answered
automatically. Press
to receive the call.
•
If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
Hands-Free Phone Control
Deleting a BLUETOOTH Device from the list
You can delete the history of a previously connected BLUETOOTH
compatible device.
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
Setting item: CLEAR DEV
1
Turn the Rotary encoder to select the BLUETOOTH
compatible device to be deleted and then press
•
Avoid answering a hands-free call in heavy traffic or on narrow or
winding streets.
Close the windows while calling to reduce background noise.
If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
/
/ENT.
•
•
2
Turn the Rotary encoder to select CLEAR YES if
you want to delete and then press
/
/ENT.
•
•
•
Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
•
•
Selecting CLEAR NO will cancel the setting.
The registration number 5 is deleted once the ignition key goes from
ACC to off.
Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Displaying the phone service provider name
Setting item: SEV NAME
The service provider name of the connected BLUETOOTH compatible
device will be displayed. If a BLUETOOTH compatible device is not
connected, “ID UNSENT” will also be displayed.
•
Depending on the character type some phone service provider name
cannot be displayed. “ID UNSENT” will also be displayed.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
18-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press
/
/ENT.
Answering a Call
The selected telephone will be called.
If one name has several numbers registered in the telephone
Incoming calls are announced by the received call ring tone and a
displayed message (PHONE).
book, press
/
/ENT after selecting the name*, then turn the
Rotary encoder to choose the desired number and press
/
/
/ENT, the telephone will be called. Press and hold
/ENT for at least 2 seconds after selecting the name, the
Press
.
The call starts.
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
•
•
When “Setting the Received Calls automatically (Auto Answer)”
(page 18) is set to AT ANS ON, you can receive a call automatically.
While calling, the source sound on the unit is muted. After calling,
playback will resume.
* If the name cannot be recognised, default number will be displayed.
•
The names registered in the telephone book are displayed. If the
name is not registered, a number is displayed. If both name and
number cannot be displayed, “ID UNSENT” will be displayed.
If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Hanging up the Telephone
•
Press and hold
for at least 2 seconds.
The call finishes.
Redialing a Number In Outgoing History
•
While receiving you can also hang up by pressing
.
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Redial Function
Setting item: DIALED
You can redial the person you have previously called.
Dialing a Number In Incoming History
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
After finishing a call “----------” will be displayed, press
within 5 seconds.
The telephone is redialed.
Setting item: RECEIVED
•
If you receive a call from an unknown number, you cannot use the
redial function to call back.
Dialing a Number In Incoming Missed Call History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Calling
Setting item: MISSED
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Calling.” The following
steps 1 to 5 are common to the various ways of making these calls. For
details, refer to each individual category for making calls.
Dialing a Number In The Phone Book
Up to 1,000 telephone numbers are downloadable from a mobile phone.
Dial a call by selecting a person from the phone book list.
1
2
Press
.
Setting item: PHONE BOOK
The outgoing method list is displayed.
•
•
•
If a name cannot be obtained via the phonebook, “
displayed.
The order of the list display depends on the design of the mobile
phone.
If the call history or phonebook of the mobile phone is added or
” is
Turn the Rotary encoder to select the outgoing
mode.
Setting items: DIALED / RECEIVED / MISSED / PHONE BOOK
DIALED:
Dialed history
Received history
Missed incoming history
deleted while it is connected to the unit, the list displayed on the unit
may not be brought up to date. If it is not updated, you cannot
correctly place a call.
RECEIVED:
MISSED:
PHONE BOOK: Mobile phonebook
Phone Book Alphabet Skip
The initial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing 1
3
Press
/
/ENT.
The outgoing mode is activated, and each mode list is
displayed.
(
ABC).
•
It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
1
During search mode, press 1
perform the Alphabet Skip Function.
A list is skipped to the next number, symbol or letter.
or
2 ( ABC) to
4
•
Turn the Rotary encoder to select a name or a
telephone number from the list.
You can use Alphabet skip function to search a name or number from
Phone Book. For details, refer to “Phone Book Alphabet Skip”
(page 19).
19-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Dial Operation
USB memory (Optional)
You can call the telephone by performing voice operation.
1
Press and hold /VOICE DIAL for at least
2 seconds.
The speak mode is activated, and “SPEAK” is displayed.
2
Say the telephone number, name you want to call
into the microphone.
•
You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, “NO SUPPORT” is displayed for 2 seconds.
The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
/
/ENT
SOURCE/
•
Playing MP3 Files with the USB memory
(Optional)
•
•
•
Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “NO CALL” is displayed
for 2 seconds.
If you place a call via voice dial, you cannot display a phone number
or name.
If you connect a USB memory containing MP3, you can play these files
on this unit.
1
Press SOURCE/ to switch to the USB AUDIO
mode.
Adjusting the volume when receiving a
Call
The mode will change every time the button is pressed.
1
2
TUNER
DISC
USB AUDIO
iPod* /AUX+*
3
AUX*
TUNER
1
While calling, you can adjust the volume.
* Displayed only when the iPod/iPhone is connected and
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 16).
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 16).
Turn the Rotary encoder to adjust the volume.
2
•
You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
3
* Refer to “Using the Front AUX Input Terminal” (page 14).
2
To pause playback, press
/
/ENT.
Pressing /ENT again will resume the playback.
/
•
•
•
The root folder is displayed as “ROOT” in the Folder Name Search
mode.
When a search is made in the USB mode, any song being played back
will be stopped.
This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3. For details,
refer to “CD/MP3” on pages 8 to 11.
Before disconnecting USB memory, be sure to change to another
source or set to pause.
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
•
•
While calling, press and hold
/
/ENT for at least
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
2 seconds to switch the call sound between the unit and
mobile phone.
•
Depending on the mobile phone, this operation may not be
performed.
20-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Memory Connection (Optional)
iPod/iPhone (Optional)
Connect USB memory
SOURCE/
1
2
Open the cover of the USB connection terminal.
1
4
6
5
2
Rotary encoder
Connect the USB memory directly to the USB
connection terminal, or via the USB cable.
This unit
USB Connection Terminal
USB memory
(sold separately)
or
/
VIEW
/
ENT Preset buttons
(1 through 6)
/MUTE
/ESC
Cable (sold
separately)
USB memory
(sold separately)
An iPod/iPhone can be connected to this unit by using the proprietary
ALPINE FULL SPEED Connection Cable (KCE-433iV) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
Remove USB memory
1
Carefully, pull out the USB memory from the USB
cable or the USB connection terminal.
•
•
Set AUX+ SETUP to OFF when an iPod/iPhone is connected (refer
to “Setting the AUX+ SETUP Mode” on page 16).
If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, use the unit in which the
BLUETOOTH function is built.
Internet and telephone functions of iPod touch or iPhone, etc., can
also be used when connecting to the unit. However, using these
functions will stop or pause the playing songs, at this time do not
operate the unit to avoid a malfunction.
Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
2
Close the cover of the USB connection terminal.
•
Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
When removing USB memory, pull it out straight.
If sound is not output or USB memory is not recognised even when
USB memory is connected, remove USB memory once, then connect
it again.
Route the USB cable away from other cables, etc.
After removing the USB memory, close the cover of the USB
connection terminal to prevent dust or foreign objects from entering
and causing a malfunction.
•
•
•
•
•
•
iPod/iPhone models usable with this unit
•
Confirmed devices regarding Made for iPod. Correct function
of earlier versions cannot be guaranteed.
iPod touch (Late 2009): Ver.3.1.3
iPod nano (5th generation): Ver.1.0.2
iPod classic (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.3.1.3
iPod nano (4th generation): Ver.1.0.4
iPod classic (120GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80GB, 160GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
About MP3 File of USB Memory
Playing back MP3
MP3 files are prepared, then stored to a USB memory. This unit
can recognise at least 100 folders (including root folder) and
100 files per folder stored in USB memory. Playback may not be
performed if a USB memory exceeds the limitations described
above.
Do not make a file’s playback time more than 1 hour.
Media supported
iPod nano (1st generation): Ver.1.3.1
This device can play back USB memory media.
•
Confirmed devices regarding Made for iPhone. Correct
function of earlier versions cannot be guaranteed.
Corresponding File Systems
This device supports FAT 16/32 for USB memory device.
iPhone 3GS: Ver.3.1.3
iPhone 3G: Ver.3.1.3
iPhone: Ver.3.1.3
•
•
For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
This unit does not support video playback from iPod/iPhone,
even using a video-compatible cable.
21-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press
The “
/ESC to activate the search selection mode.
” indicator lights up.
Playback
Turn the Rotary encoder to select the ARTIST
search mode, and then press /ENT.
1
Press SOURCE/ to switch to the iPod mode.
/
1
2
TUNER
DISC
TUNER
USB AUDIO
iPod* /AUX+*
PLAYLIST
PODCAST
AUDIOBOOK
ARTIST
GENRE
ALBUM
COMPOSER
SONG
3
AUX*
1
PLAYLIST
* Displayed only when the iPod/iPhone is connected and
AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP
Mode” (page 16).
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 16).
3
4
Turn the Rotary encoder to select the desired
Artist, and then press /ENT.
2
/
3
* Refer to “Using the Front AUX Input Terminal” (page 14).
Turn the Rotary encoder to select the desired
Album, and then press /ENT.
/
2
Press
or
to select the desired song.
5
Turn the Rotary encoder to select the desired
Return to the beginning of the current song:
Press
Song, and then press
/
/ENT.
.
•
After pressing and holding
in each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs of the selected hierarchy are played back.
/
/ENT for at least 2 seconds while
Fast backward through current song:
Press and hold
.
•
•
After selecting [ALL] in the search mode with“*”, press and hold
Advance to the beginning of the next song:
Press
/
/ENT for at least 2 seconds to play back all songs in the iPod/
.
iPhone or selected search mode.
Fast forward through current song:
Press and hold
While in the search mode, if you press and hold
/ESC for
.
2 seconds, or no operation is performed for 10 seconds, the search
mode is cancelled.
•
•
•
•
•
•
In the search mode, pressing
mode.
When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
“NO PODCAST” will be displayed if there is no podcast data in the
iPod/iPhone in the PODCAST search mode.
/MUTE will return to the previous
3
To pause playback, press
/
/ENT.
Pressing /ENT again will resume playback.
/
•
•
•
A song playing on the iPod/iPhone while it is connected to this unit
will continue to play from where it was paused after disconnection.
If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing 1
An episode may have several chapters, the chapter can be changed
by pressing or
or
2.
.
“NOAUDIOBOK” will be displayed if there is no audiobook data in
the iPod/iPhone in the AUDIOBOOK search mode.
If “iPod name” stored in the iPod/iPhone is selected in the desired
Playlist search mode, and
all songs in the iPod/iPhone. Also, if you press and hold
/
/ENT is pressed, you can search for
/ENT
Searching for a desired Song
/
for at least 2 seconds, all songs in the iPod/iPhone are played back.
Depending on the iPod/iPhone, podcast search is not supported.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 23.
An iPod/iPhone can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
•
•
Quick Search
Hierarchy 1
Playlist
Hierarchy 2
Song
Hierarchy 3
Hierarchy 4
—
Song
—
—
—
You can search a song from all songs in the iPod/iPhone without
selecting an album, artist, etc.
Artist*
Album*
Song
Album*
—
Song
—
—
—
1
Press and hold
activate the Quick Search mode.
The “ ” indicator lights up.
/ESC for at least 2 seconds to
Podcast
Genre*
Episode
Artist*
Album*
—
—
—
Album*
Song
—
Song
—
Composer*
Audiobook
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
—
For example: Searching by Artist name
•
Press and hold
/ESC for at least 2 seconds in the search mode to
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
cancel. Or, the search mode is cancelled if no operation is performed
for 10 seconds.
If many songs are in the iPod/iPhone, it takes time to search for
songs.
If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 23.
•
•
•
This function is inactive during repeat (
) playback.
22-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Search Function
Random Play Shuffle (M.I.X.)
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song.
The Shuffle function of the iPod/iPhone is displayed as
unit.
on this
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is
selected randomly. This continues until all albums have been
played.
In the search mode, press any one of the preset
buttons (1 through 6) to quickly skip over a
designated percent of your song content.
Song search example:
Shuffle Songs:
If there are 100 songs in your iPod/iPhone, they are divided into
6 groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
Example 1:
1
Press 5
.
Suppose the song you are searching for is located at around
the middle (50%) of your library: press button 4 to jump to the
50th song and turn the Rotary encoder to find the desired
song.
The songs are played back in random sequence.
(off)
(Shuffle Albums)
(Shuffle Songs)
Example 2:
Suppose the song you are searching for is located near the
end (83%) of your library: press button 6 to jump to the 83rd
song and turn the Rotary encoder to find the desired song.
2
To cancel M.I.X. play, select (off) with the above
procedure.
•
If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle
Albums is selected.
All 100 songs (100%)
0%
1
17%
33%
50%
67%
83%
6
Shuffle ALL:
Preset
buttons
Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
song does not play back again until all songs have been played
back.
2
3
4
5
First
17th
33rd
50th
67th
83rd
Songs
song song song song song song
1
Press 6.
The songs are played back in random sequence.
Select Playlist/Artist/Album/Genre/
Composer
(off)
(Shuffle ALL)
2
To cancel M.I.X. play, select (off) with the above
procedure.
Playlist/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
•
If Shuffle ALL is selected, the selected songs being played back in the
search mode are cancelled.
Press 1
or
2 to select the desired Playlist/Artist/
Album/Genre/Composer.
•
•
•
If the song search mode was used to select a song, this function is
inactive.
If an album is selected during an artist search, other albums by that
artist are searchable.
This function is inactive during shuffle (
) playback.
23-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Play
Information
Only Repeat One is available for the iPod/iPhone.
Repeat One:
A single song is repeatedly played back.
In Case of Difficulty
1
Press
4.
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
The song is played back repeatedly.
(off)
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
Basic
No function or display.
•
During repeat playback, no other songs are selectable by pressing
•
Vehicle’s ignition is off.
or
.
- If connected following instructions, the unit will not operate
with the vehicle’s ignition off.
•
•
Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
Blown fuse.
Displaying the Text
You can display the tag information of a song in the iPod/iPhone.
- Check the fuse of the unit; replace with the proper value if
necessary.
Internal micro-computer malfunctioned due to interference noise
etc.
Press VIEW.
Each press changes the display.
•
•
When the TEXT SCR is set to SCR MANU, press and hold VIEW for
- Press the RESET switch with a ballpoint pen or other pointed
article.
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
ALBUM NAME*
TRACK NO./ELAPSED TIME
ARTIST NAME*
SONG TITLE*
Radio
Unable to receive stations.
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
•
No antenna or open connection in cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
•
•
Only alphanumeric characters (ASCII) can be displayed.
If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64
(64 byte).
Unable to tune stations in the seek mode.
•
You are in a weak signal area.
- Make sure the tuner is in the DX mode.
•
If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
•
•
Some characters may not be correctly displayed.
“NO SUPPORT” is displayed if text information is not supported by
the unit.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
•
Broadcast is noisy.
•
The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
The antenna is poorly grounded.
•
- Make sure the antenna is grounded properly at its mounting
location.
24-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Audio
CD Player not functioning.
The sound is not output from the speakers.
•
Out of operating temperature range +50°C (+120°F) for CD.
•
Unit has no output signal of the internal amplifier.
- Allow the vehicle’s interior (or trunk) temperature to cool.
- POWER IC is switched to “POW ON” (page 16).
CD playback sound is wavering.
iPod
•
Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
iPod does not play and no sound is output.
The iPod has not been recognised.
•
- Reset this unit and the iPod. Refer to “Initial System Start-Up”
(page 6). To reset the iPod, refer to the Owner’s Manual of the
iPod.
CD insertion not possible.
•
A CD is already in the CD player.
- Eject the CD and remove it.
•
The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Indication for CD Player
Unable to fast forward or backward the CD.
•
•
No CD is inserted.
- Insert a CD.
Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
•
The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
•
•
•
•
Improper mounting of the unit.
- Securely re-mount the unit.
The disc is very dirty.
- Clean the disc.
The disc has scratches.
- Change the disc.
The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
•
•
•
Mechanism error.
1) Press the button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
CD playback sound skips without vibration.
•
The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
Error displays (built-in CD player only).
•
When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to page 6) and press
If the disc still cannot be ejected, consult your Alpine dealer.
Mechanical error.
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
again.
CD-R/CD-RW playback not possible.
•
Close session (finalisation) has not been performed.
- Perform finalisation and attempt playback again.
A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
MP3
MP3 is not played back.
•
Writing error occurred. The MP3 format is not compatible.
- Make sure the MP3 has been written in a supported format.
Refer to “About MP3” (pages 10-11), then rewrite in the
format supported by this device.
25-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Indication for USB memory
Indication for iPod Mode
•
Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
•
The iPod/iPhone is not connected.
- Make sure the iPod/iPhone is correctly connected (refer to
“Connections”).
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
Make sure the cable is not bent excessively.
UNIT ERROR
•
•
There are no songs in the iPod/iPhone.
- Download songs to the iPod/iPhone and connect to this unit.
•
•
A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
NO DEVICE
Communication error.
- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPod/iPhone
and this unit, using the iPod/iPhone cable.
A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
•
•
•
No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
•
Caused by the iPod/iPhone Software Version not being
compatible with this unit.
- Update the iPod/iPhone Software Version to be compatible
with this unit.
A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
•
•
The iPod/iPhone is not verified.
- Reset the iPod.
- Try another iPod/iPhone, if available.
NO SUPPORT
Text information that is not recognizable by the unit has been input.
- Use a USB memory device with input text information that is
supported by the unit.
Power surge error.
Excessive voltage/current is supplied to the iPod/iPhone.
- Try another iPod/iPhone, if available.
BLUETOOTH mode
•
The BLUETOOTH device is not connected.
- Connect the BLUETOOTH device.
Indication for all Modes
•
Malfunction occurred as a result of the speaker cable shorting on
the car chassis.
- Route the cable correctly, and set POWER IC to POW ON
(page 16).
If the above solution does not work, consult your nearest
dealer.
26-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL
Specifications
Power Requirement
14.4 V DC
(11-16 V allowable)
50 W × 4
FM TUNER SECTION
Maximum Power Output
Tuning Range
87.5-108.0 MHz
Maximum Pre-Output Voltage
2 V/10 k ohms
14 dB at 100 Hz
14 dB at 10 kHz
1.5 kg (3 lbs. 4 oz)
Mono Usable Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
9.3 dBf (0.8 µV/75 ohms)
Bass
80 dB
65 dB
35 dB
2.0 dB
Treble
Weight
CHASSIS SIZE
Capture Ratio
Width
Height
Depth
178 mm (7")
50 mm (2")
AM TUNER SECTION
Tuning Range
531-1,602 kHz
22.5 µV/27 dB
161 mm (6-3/8")
Sensitivity (IEC Standard)
NOSEPIECE SIZE
CD PLAYER SECTION
Width
Height
Depth
170 mm (6-3/4")
46 mm (1-13/16")
25 mm (1")
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
5-20,000 Hz ( 1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
•
Due to continuous product improvement, specifications and design
are subject to change without notice.
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
USB SECTION
USB requirements
Max. Power Consumption
USB Class
USB 1.1/2.0
500 mA
Mass Storage
File System
FAT 16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
2-Channel (Stereo)
5-20,000 Hz ( 1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
85 dB (at 1 kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
BLUETOOTH SECTION
BLUETOOTH Specification
BLUETOOTH V 2.0
+4 dBm Max. (Power class 2)
(Hands-Free Profile)
(Head Set Profile)
Output Power
HFP
HSP
27-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 to 5 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
Precautions
•
•
•
Be sure to disconnect the cable from the (–) battery post before
installing your CDE-125EBT. This will reduce any chance of
damage to the unit in case of a short-circuit.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the CDE-125EBT to the fuse box, make
sure the fuse for the intended circuit of the CDE-125EBT has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your Alpine
dealer.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
•
•
The CDE-125EBT uses female RCA-type jacks for connection
to other units (e.g. amplifier) having RCA connectors. You may
need an adapter to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
SHIFT LEVER.
Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
SERIAL NUMBER:
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
28-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
Installation
1
unit to a clean metal spot using a screw (* ) already
attached to the vehicle’s chassis.
2
•
For the screw marked “* ”, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier to
the corresponding output lead coming from the left
rear of the CDE-125EBT. Connect all other leads of
the CDE-125EBT according to details described in
the CONNECTlONS section.
Detachable Front
Panel
3
Slide the CDE-125EBT into the dashboard until it
clicks. This ensures that the unit is properly locked
and will not accidentally come out from the
dashboard. Install the detachable front panel.
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
Removal
1. Remove the detachable front panel.
•
The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
2. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
Less than 35°
This unit
Bracket Keys
(Included)
Mounting Sleeve
(Included)
1
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Dashboard
Front Frame
Pressure Plates*
Screws (M5 × 8)
(Included)
This unit
This unit
Ground Lead
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
3
*
Remove the mounting sleeve from the main unit (see
“Removal” on page 29).
2
Screw
Mounting Bracket
Hex Nut (M5)
Secure the ground lead of the unit to a clean metal spot using a screw
3
(* ) already attached to the vehicle’s chassis.
2
*
Bolt Stud
Mounting the Microphone
Metal
For the sake of safety, mount the microphone in the following location.
Mounting
Strap
•
•
•
In a stable and secure location.
1
In a location that does not inhibit safely driving the vehicle.
Mount the microphone in a location where the driver’s voice can
easily be picked up.
*
This unit
Choose a location for the microphone that can easily pick up the driver’s
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
Ground Lead
Chassis
29-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
To iPod/iPhone
Antenna
(Blue)
(Blue/White)
(Pink/Black)
(Orange)
POWER ANT
To power antenna
To amplifier
Not used
REMOTE TURN-ON
AUDIO INTERRUPT IN
ILLUMINATION
To the instrument cluster illumination
lead
(Red)
IGNITION
BATTERY
Ignition Key
(Yellow)
(Black)
GND
Battery
(Grey)
Speakers
SPEAKER
RIGHT FRONT
Front Right
(Grey/Black)
(Violet/Black)
SPEAKER
RIGHT REAR
Rear Right
Rear Left
(Violet)
(Green)
SPEAKER
LEFT REAR
(Green/Black)
(White/Black)
SPEAKER
LEFT FRONT
Front Left
Amplifier
(White)
Speakers
Front or Subwoofers*
* When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 15.
30-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Receptacle
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
•
This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Front/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
MIC Input Connector
To Microphone.
RCA Extension Cable (sold separately)
Audio Interrupt In Lead (Pink/Black)
Not used for this unit.
Full Speed Connector
Control iPod/iPhone signals.
Illumination Lead (Orange)
Connect this to an iPod/iPhone by using FULL SPEED
Connection Cable (KCE-433iV) (sold separately) or to an
external device (such as a portable player) by using
conversion cable (KCE-237B) for building up the AUX IN
(sold separately).
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
this unit to dim whenever the vehicle’s lights are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
•
Refer to “Setting the AUX+ SETUP Mode” (page 16).
AUX+ ON: When the external device is connected.
AUX+ OFF:When an iPod/iPhone is connected.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
FULL SPEED Connection Cable (KCE-433iV)
(sold separately)
Front AUX Input Terminal
Ground Lead (Black)
This terminal allows for input of audio from an external
device (such as a portable player), using a commercially-
available converter cable.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
USB Connection Terminal
Connect USB memory (sold separately).
Power Supply Connector
Right Front (+) Speaker Output Lead (Grey)
Right Front (–) Speaker Output Lead (Grey/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
To prevent external noise from entering the audio system.
•
•
•
•
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
•
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
31-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Rules of Bluetooth Electromagnetic Radiation Regulation
Country
UAE
Rules of Electromagnetic Radiation Regulation
Approved by TRA
Thailand
Australia
New Zealand
This telecommunication equipment conforms to technical standard NTC TS1010-2550
Declaration of Conformity
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|