Alpine Cooktop PXA H701 User Manual

PXA-H701

MULTIMEDIA MANAGER™

• OWNER'S MANUAL

Please read before using this equipment.

• MODE D'EMPLOI

Veuillez lire avant d’utiliser cet appareil.

• MANUAL DE OPERACIÓN

Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS MARKETING, INC.

1-1-8 Nishi Gotanda,

Shinagawa-ku, Tokyo 141-0031, Japan

Phone 03-5496-8231

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris

Nord II, B.P. 50016, 95945 Roissy

Charles de Gaulle Cedex, France

Phone 01-48638989

Phone 03-9769-0000

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

ALPINE ELECTRONICS GmbH

Frankfurter Ring 117, 80807 München,

Germany

ALPINE ITALIA S.p.A.

Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), Italy

Phone 1-800-ALPINE-1 (1-800-257-4631)

Phone 089-32 42 640

ALPINE ELECTRONICS OF CANADA, INC.

7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, Canada

ALPINE ELECTRONICS OF U.K. LTD.

Alpine House

Phone 02-484781

Fletchamstead Highway,

Coventry CV4 9TW, U.K.

Phone 0870-33 33 763

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava) - APDO 133, Spain

Phone 945-283588

Phone 1-800-ALPINE-1 (1-800-257-4631)

Kukje Printing Co., Ltd

127-2 Gamjeon-dong

Sasang-gu

Busan Korea

Printed in Korea (S)

68-00493Z08-A

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

Before using

The control unit for the PXA-H701 is sold separately. The operation method

using this control unit (sold separately) is printed in this instruction manual.

However, if you use head units such as the IVA-D300 or the IVA-D900, you

can also operate the PXA-H701 from these head units (Items such as AUTO

TCR and navigation system voice guidance interruption settings can only be

operated from the Control Unit). For more details on the head unit operation,

see "External Audio Processor (Optional) in the instruction manual for the

head unit.

Using Dolby Surround

Contents

Operating Instructions

Using the Pro Logic II mode ......................................... 20

Adjustment procedure for Dolby Surround ................... 21

Speaker setup ................................................................. 22

Adjusting the speaker levels .......................................... 22

Mixing bass sound to the rear channel .......................... 23

WARNING

Adjusting the acoustic image......................................... 24

Achieving powerful high volume sound ....................... 25

Adjusting the DVD level ............................................... 25

WARNING..................................................2

CAUTION ...................................................2

PRECAUTIONS .........................................3

Convenient Functions

Navigation system voice guidance interruption (only

when using the control unit sold separately) ........... 26

Linear PCM setting ....................................................... 26

Display settings ............................................................. 27

MX mode setting (Ai-NET connection) ........................ 27

Storing settings in the memory ...................................... 28

Calling out stored values ............................................... 28

Defeat mode................................................................... 28

Switching the display mode .......................................... 29

Basic Operation

Turning the power on and off .......................................... 4

About indicators .............................................................. 4

Operating the Rotary encoder.......................................... 4

Setting the speakers ......................................................... 4

Using with Ai-NET connections ..................................... 5

Using with RCA-type or optical cable connections

(non Ai-NET connections) (only when using the

control unit sold separately) ...................................... 5

Installation and Connections

Automatic Adjustments

Performing time correction automatically

Warning ......................................................................... 30

Caution .......................................................................... 30

Precautions .................................................................... 31

Accessories .................................................................... 32

Installation ..................................................................... 33

Basic Connections Diagram .......................................... 36

Examples of system expansion...................................... 37

(Automated Time Correction) ................................... 6

Settings/Adjustments

Performing time correction manually (TCR)/Switching

the phase .................................................................... 8

Bass Focus ..................................................................... 10

Graphic equalizer adjustments ...................................... 12

Parametric equalizer adjustments .................................. 13

X-OVER ........................................................................ 15

X-OVER adjustment ..................................................... 16

MX settings ................................................................... 18

BASS COMP. setting .................................................... 19

Information

Terminology .................................................................. 41

Others

In case of difficulty ........................................................ 42

Specifications ................................................................ 43

LIMITED WARRANTY

1-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNING

CAUTION

WARNING

This symbol means important instructions.

Failure to heed them can result in injury or

material property damage.

This symbol means important instructions.

Failure to heed them can result in serious injury

or death.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

DO NOT OPERATE ANY FUNCTION THAT TAKES

YOUR ATTENTION AWAY FROM SAFELY DRIVING

YOUR VEHICLE.

Failure to do so may cause personal injury or damage to

the product. Return it to your authorized Alpine dealer or

the nearest Alpine Service Center for repairing.

Any function that requires your prolonged attention

should only be performed after coming to a complete stop.

Always stop the vehicle in a safe location before

performing these functions. Failure to do so may result in

an accident.

KEEP THE VOLUME AT A LEVEL WHERE YOU CAN

STILL HEAR OUTSIDE NOISE WHILE DRIVING.

Failure to do so may result in an accident.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.

Viewing the display may distract the driver from looking

ahead of the vehicle and cause an accident.

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

USE THIS PRODUCT FOR MOBILE 12V

APPLICATIONS.

Use for other than its designed application may result in

fire, electric shock or other injury.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If

swallowed, consult a physician immediately.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

Failure to do so may result in fire or electric shock.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

(Check with your dealer if you are not sure.) Failure to do

so may result in fire, etc.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result

in fire.

2-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

Temperature

Be sure the temperature inside the vehicle is between

+60°C (+140°F) and –10°C (+14°F) before turning your

unit on.

Installation Location

Make sure the PXA-H701 will not be installed in a

location subjected to:

•

Direct sun and heat

High humidity and water

Excessive dust

Excessive vibrations

Maintenance

If you have problems, do not attempt to repair the unit

yourself. Return it to your Alpine dealer or the nearest

Alpine Service Station for servicing.

3-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Setting the speakers

First make the speaker settings.

Turn off speaker channels that are not

connected.

CHANNEL

ENTER

Press the SETUP button.

The setup mode is set.

Turn the Rotary encoder to select the

“SPEAKER SELECT” mode, then press the

ENTER button.

SETUP

Rotary encoder

PRO LOGIC II indicator

Dolby Digital indicator

DTS indicator

Press the CHANNEL button to select the

speaker, then press the ENTER button.

Turning the power on and off

(Front 1)

(Front 2)

(Rear)

This unit does not have a power switch. The head

unit to which the unit is connected, controls its

power.

(Center)

Sub. W

(Subwoofer)

Turn the Rotary encoder to set the speaker

type ON or OFF, then press the ENTER button.

Repeat steps 3 and 4 to set all unconnected

speaker channels to “OFF”.

NOTE

When the power is turned ON for the first time, the

SETUP mode is automatically activated.

About indicators

F1 (Front 1): Tw (Tweeter)/Full (Full Range)/OFF

F2 (Front 2): Full (Full Range)/OFF

• PRO LOGIC II indicator

Lights amber in the Dolby Surround decode

mode

• Dolby Digital indicator

Lights amber in the Dolby Digital decode mode

• DTS indicator

R (Rear)

: ON/OFF

Ct (Center) : Center/Sub.W (Subwoofer)/OFF

NOTE

Set to “Subwoofer” when a subwoofer is connected to

the center speaker output.

Sub.W (Subwoofer) : ON/OFF

Lights amber in the DTS decode mode

When Full (Full Range) is selected in F1

(Front 1), the confirmation message of

Tweeter presence will be displayed next.

Turn the Rotary encoder and select YES/

NO, then press the ENTER button. Please

set to protect the speakers.

Operating the Rotary encoder

This unit uses the Rotary encoder when

establishing settings or adjustments. When

operating with the Rotary encoder, press the

Rotary encoder and startup the Rotary encoder

before the operation.

Press the SETUP button repeatedly to quit the

setup mode.

4-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting the input level

Using with Ai-NET connections

Using the analog, RCA-type connections, the

PXA-H701’s input level must be preset from the

head unit.

Adjust the input level using a sound source with

a high recording level (such as pop or rock

music).

When Ai-NET connections are used, the volume,

subwoofer, balance and fader are adjusted from

the head unit (they cannot be adjusted from the

PXA-H701). However, BASS and TREB can not

be adjusted from the head unit, so adjust them

from PXA-H701.

Turn on the head unit’s power.

Turn the Rotary encoder on the main unit

counterclockwise and set the volume level to “0”.

Using with RCA-type or optical cable

connections (non Ai-NET connections)

(only when using the control unit sold

separately)

Gradually increase the volume of the head unit

until “INPUT LEVEL OVER” appears in the

display.

Reduce the volume slightly from this position,

until “INPUT LEVEL OVER” display just turns off.

This completes the setting.

Do not change the head unit volume level from

this optimum setting. Use the PXA-H701, only,

for changing the volume level.

Switching the input

The PXA-H701 is equipped with three sets of

analog signal inputs and three sets of digital

signal inputs. For further information about

connections, see Page 36.

NOTE

Switch to the spectrum analyzer display mode or the

input channel display mode before adjusting the input

level. (See page 29)

Press the SETUP button.

The setup mode is set.

Adjusting the volume, balance, fader and subwoofer

Turn the Rotary encoder to select the “INPUT

SELECT” mode, then press the ENTER button.

After determining the input level, adjust the

volume, balance, fader and subwoofer from the

PXA-H701. Be careful not to make these

adjustments on the head unit.

Turn the Rotary encoder to select the input

mode, then press the ENTER button.

Analog 1

Digital 3

Analog 2

Digital 2

Analog 3

Digital 1

Press the ENTER button and select the mode to

be adjusted.

Press the SETUP button repeatedly to quit the

setup mode.

VOLUME BALANCE

Sub.W LEVEL

FADER

NOTE

Non Ai-NET connections

Turn the Rotary encoder within 5 seconds and

adjust to the desired level.

Alpine products are equipped for a bus connection

system called “Ai-NET” which can only be used for

connections between Ai-NET products.

The PXA-H701 is an Ai-NET product, but is designed to

allow connections to other (non Ai-NET) products as

well. Thus RCA-type and optical cable connections are

also possible.

VOLUME

BALANCE

FADER

: 0 ~ 35

: L15 ~ R15

: F15 ~ R15

Sub.W LEVEL : 0 ~ +15

Connections to non Ai-NET products are referred to as

“non Ai-NET connections”.

NOTE

When the subwoofer is set to “OFF”, the Sub.W

LEVEL adjustment is ineffective.

5-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Automatic Adjustments

Connect the microphone.

1) Fasten the microphone included with control

unit at the center of the driver’s seat’s

headrest facing upwards.

AUTO TCR

ENTER

To microphone

Microphone

input jack

Belt, etc.

Rotary encoder

Performing time correction automatically

(Automated Time Correction)

2) Connect the microphone to the PXA-H701.

Base unit

Due to the particular conditions inside the

vehicle, there is a major difference between the

distances of the various speakers and the

listening position. This function uses the

included measurement microphone to

automatically measure and analyze the distances

between the speakers and the listening position

and perform the optimum time correction.

The AUTO TCR operation from the head unit

may not be performed depending on the head

unit combination.

To microphone

input jack

Microphone

Set the vehicle’s engine key to the ACC position.

•

Vibrations could make it difficult to achieve

the appropriate adjustment values, so turn

the engine off.

Check that the defeat mode is off.

(See page 28.)

•

Noise could make it impossible for automatic

measurements to be made, so make sure

the air conditioner, heater and all other

devices are turned off.

Prepare the vehicle.

1) Park the vehicle in a quiet place.

2) Close the vehicle’s doors and windows.

Press the AUTO TCR button.

Turn the Rotary encoder, select the tweeter

setting, then press the ENTER button.

YES

The count down starts.

Once the count down starts, get out of the

vehicle and shut the doors within 10 seconds.

AUT

TCR

10 sec .

t o s t a r t

6-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

With the automatic adjustment function, the

operation described below is performed.

Adjustments are completed in about 10 seconds.

Time correction.

“END” is displayed for about 15 seconds and the

automatic adjustment is completed.

•

If the microphone does not pick up the

sound or the speakers are not working or are

connected or wired improperly, the automatic

adjustments are not performed and a error

message is displayed.

Check the various speakers then perform

the automatic adjustments again.

AUT

TCR

ERROR

Check that the automatic adjustment has been

completed (that “END” has been displayed for

about 15 seconds), then get back into the

vehicle and disconnect the microphone.

To store, follow the procedure described at

“Storing settings in the memory” (page 28).

NOTES

• Automatic measurements cannot be made unless the

microphone is connected (error display). To perform

time correction automatically, be sure to connect the

included microphone first.

• Before making automatic measurements, press the

AUTO TCR button to cancel it.

• No other operations can be performed while

measurements are being made.

• Measurements will differ according to the position in

which the microphone is mounted.

• Note that using for extended periods of time without

turning on the engine may wear down the battery.

• Automatic measurements cannot be made for the

subwoofer. Make the subwoofer setting manually.

Refer to “Performing time correction manually

(TCR)/Switching the phase” (page 8).

• When the speaker is set to the “OFF” mode, the TCR

for that speaker cannot be adjusted. Refer to “Setting

the speakers” (page 4).

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

7-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

• Concrete examples

1.Calculating the time correction value for the

front left speaker on the diagram below.

TCR/PHASE

CHANNEL

ENTER

Conditions:

Distance between farthest speaker and

listening position: 2.25 m (88-3/4")

Distance between front left speaker and

listening position: 0.5 m (20")

Calculation: L = 2.25 m (88-3/4") – 0.5 m (20")

= 1.75 m (68-3/4")

Rotary encoder

Compensation time = 1.75 ÷ 343 x 1000

= 5.1 (ms)

In other words, setting the time correction value

for the front left speaker to 5.1 (ms) sets a

virtual distance matching the distance to the

farthest speaker.

Performing time correction manually

(TCR)/Switching the phase

Because of the particular conditions inside the

vehicle, there are major differences in the

distances between the different speakers and the

listening position. The proper time correction can

be obtained using the automatic time correction

function (“AUTO TCR”), but it is also possible to

calculate the optimum correction values and

eliminate the time error at the listening position

yourself using this function. You can also use this

function to switch the phase.

5.1ms

0.5m

2.25m

When operating with head units such as the IVA-

D300, the adjustment is different depending on

the head unit.

The sound is uneven

because the distance

between the listening

position and the different

speakers is different.

The difference in the

distance between the

front left and rear right

speakers is 1.75 meters

(68-3/4").

Time correction eliminates

the difference between

the time required for the

sound from the different

speakers to reach the

listening position.

Setting the time correction

of the front left speaker to

5.1 ms makes it possible

to coordinate the distance

from the listening position

to the speaker.

Check that the defeat mode is off.

(See page 28.)

Sit in the listening position (the driver’s seat, for

example) and measure the distance (in meters)

between your head and the various speakers.

Calculate the difference in distance between the

farthest speaker and the other speakers.

L = (distance of farthest speaker)

– (distance of other speakers)

Press the TCR/PHASE button to set the time

correction mode.

Divide the distances calculated for the different

speakers by the speed of sound (343 m/s

temperature 20°C).

This value is the time correction value for the

different speakers.

8-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn the Rotary encoder to switch the phase,

then press the CHANNEL button.

Press the ENTER button to return to step 8.

Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR)

L or R

(factory default)

180

L and R (LR): Sets the same adjustment values

for the left and right channels.

T CR / PH AS E L F 1 RR

L or R:

Different adjustment values can

be set for the left and right

channels.

DE L AY C

1 0 . 2 5m s

PHAS E : 1 8 0 °

Press the CHANNEL button and select the

desired channel, then press the ENTER button.

10 Repeat steps 7 to 9 to adjust other channels.

When “L and R (LR)” is selected:

11 Once the adjustments are completed, press the

TCR/PHASE button.

Front 1 Front 2 Rear

Sub. W

Cente^*r¹

NOTES

• When the speaker is set to the “OFF” mode, the TCR

for that speaker is ineffective. Refer to “Setting the

speakers” (page 4).

When “L or R” is selected:

Front 1 L Front 1 R Front 2 L Front 2 R

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

Sub. W

Center

Rear R Rear L

*1 When center is set to subwoofer, it is not

displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).

*3 When center is set to subwoofer, it becomes

Sub.W(R).

Turn the Rotary encoder to adjust the time

correction value (0.00 ~ 20.00ms), then press

the ENTER button.

T CR / PH AS E L F 1 RR

DE L AY C

1 0 . 2 5m s

PHAS E : 1 8 0 °

* The difference in the sound when the defeat

mode is turned off (adjusted time

correction) and on (default value) can be

checked as follows:

1) While in the adjustment mode, press and

hold the TCR/PHASE button for at least 2

seconds.

2) Press the TCR/PHASE button to switch the

defeat mode on and off and listen to the

difference in the sound.

3) To quit, select the desired setting, then press

the ENTER button.

Note that if you press the ENTER button with

the defeat mode turned on, the adjustments

are reset to the defeat on status (the default

values).

9-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

Turn the Rotary encoder to set the step of front-

rear/left-right.

TCR/PHASE

CHANNEL

ENTER

Moreover, for setting another channel (speaker),

repeat steps 4 and 5.

After completing the setting, press the ENTER

button to return to the time correction mode.

Here, you can compare the sound of Defeat OFF

(adjustment value) and Defeat ON (initial).

For the operation method, refer to step 8 of

“Performing time correction manually (TCR)/

Switching the phase” on page 9.

B.C.

Rotary encoder

Press the TCR/PHASE button to complete the

setting.

NOTE

Bass Focus

The setting made in Bass Focus is reflected in the time

correction.

The time difference between the front-rear/left-

right speakers, can be adjusted a pair at a time.

Audible time correction can be made from 0.05

ms to 20.00 ms in 401 steps (0 to 400).

Check that the defeat mode is off.

(See page 28.)

Press the TCR/PHASE button to select the time

correction mode.

Press the B.C. button to select the “BASS

FOCUS” setting mode.

Press the CHANNEL button to select the front-

rear/left-right speaker.

Front (left-right)

speakers

Left (front-rear)

speakers

Rear (left-right)

speakers

Right (front-rear)

speakers

10-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Time difference Table

Example of Steps 4 and 5 Setting

1.After entering corrections for the front (left and

right) speakers in STEP 30, the time difference

is 1.5 ms for both front-left and front-right

speakers.

Number

steps

Time

Difference

(ms)

Number

steps

Time

Difference

(ms)

Number

steps

Time

Difference

(ms)

0.00

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0.45

0.50

0.55

0.60

0.65

0.70

0.75

0.80

0.85

0.90

0.95

1.00

1.05

1.10

1.15

1.20

1.25

1.30

1.35

1.40

1.45

1.50

1.55

1.60

1.65

1.70

1.75

1.80

1.85

1.90

1.95

2.00

2.05

2.10

2.15

2.20

2.25

2.30

2.35

2.40

2.45

2.50

2.55

2.60

2.65

2.70

2.75

2.80

2.85

2.90

2.95

3.00

3.05

3.10

3.15

3.20

3.25

3.30

3.35

3.40

3.45

3.50

3.55

3.60

3.65

3.70

3.75

3.80

3.85

3.90

3.95

4.00

4.05

4.10

4.15

4.20

4.25

4.30

4.35

4.40

4.45

4.50

4.55

4.60

4.65

4.70

4.75

4.80

4.85

4.90

4.95

1.5ms

2. After entering corrections for the left (front and

rear) speakers in STEP 30, the time difference

becomes 3.0 ms* for the front left speaker, and

1.5 ms for the left rear speaker.

* Because the time difference was already set

to 1.5 ms for the front left speakers in STEP 1,

the additional correction in STEP 30 makes

the time difference of the front left speaker 3.0

ms.

3.0ms

1.5ms

100–399 5.00–19.95

400

20.00

11-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

*3 When center is set to subwoofer, it becomes

Sub.W(R).

Turn the Rotary encoder to select the

frequency, then press the ENTER button.

G.EQ

CHANNEL

ENTER

Adjustable frequencies

Front/Rear/Center: 20Hz~20kHz (1/3 octave

step)

Sub.W: 20Hz~160Hz (1/3 octave step)

P.EQ

Rotary encoder

Turn the Rotary encoder to adjust the level ( 9

dB in steps of 1 dB), then press the ENTER

button.

3 1 –G . E

F r o n t

Graphic equalizer adjustments

1 2 . 5 k H z

– 9 d B

The graphic equalizer allows you to modify the

sound using 31 bands each for the front (left and

right), rear (left and right) and center speakers.

An additional 10 bands are available for the

subwoofer. This allows you to customize the

sound to suit your taste.

Repeat steps 5 and 6 to adjust other

frequencies.

To adjust other channels, press the CHANNEL

button to return to step 4.

* The difference in the sound when the defeat

mode is turned off (adjusted graphic

equalizer settings) and on (default values)

can be checked as follows:

1) While in the adjustment mode, press and

hold the G.EQ button for at least 2 seconds.

2) Press the G.EQ button to switch the defeat

mode on and off and listen to the difference

in the sound.

Check that the defeat mode is off.

(See page 28.)

Press the G.EQ button to set the graphic

equalizer mode.

Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR)

L or R

3) To quit, select the desired setting, then press

the ENTER button.

(factory default)

Note that if you press the ENTER button with

the defeat mode turned on, the adjustments

are reset to the defeat on status (the default

values).

L and R (LR): Sets the same adjustment values

for the left and right channels.

L or R:

Different adjustment values can

be set for the left and right

channels.

Once the adjustments are completed, press the

G.EQ button.

Press the CHANNEL button to select the desired

channel, then press the ENTER button.

NOTES

• When the speaker is set to the “OFF” mode, the

graphic equalizer for that speaker is ineffective.

Refer to “Setting the speakers” (page 4).

• Check the playable frequency ranges of the connected

speakers before making the equalizer adjustments. If

the speaker’s playable frequency range is 55 Hz to 30

kHz, for example, adjusting the 40 Hz or 20 Hz band

has no effect. Additionally, you may overload and

damage the speakers.

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

• When graphic EQ is adjusted, the adjustment for

parametric EQ becomes ineffective.

When “L and R (LR)” is selected:

Front

Rear

Center

Sub. W

When “L or R” is selected:

Front L Front R Rear L

Rear R

Sub. W

Center

*1 When center is set to subwoofer, it is not

displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).

12-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn the Rotary encoder to select the

frequency, then press the ENTER button.

For the adjustable frequencies, see page 43.

Parametric equalizer adjustments

The frequency bands of the graphic equalizer are

fixed. This makes it very difficult to correct for

undesired peaks and dips at specific frequencies.

The parametric equalizer’s center frequency can

be tuned these specific frequencies. Then, the

bandwidth (Q) and level are fine-tuned,

independently, to make the necessary

corrections. The parametric equalizer function is

an advanced tool for serious audiophiles.

P . E

P F r o n t

BAND : 4

F c : 3 . 1 5 k H z

: 2

L v : + 7 d B

Turn the Rotary encoder to adjust the band

width (Q), then press the ENTER button.

The band width can be adjusted in 6 steps of

0.5/1/2/3/4/5.

Check that the defeat mode is off.

(See page 28.)

Press the P.EQ button to set the parametric

equalizer mode.

Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

P . E

P F r o n t

BAND : 4

L and R (LR)

L or R

F c : 3 . 1 5 k H z

: 2

(factory default)

L v : + 7 d B

L and R (LR): Sets the same adjustment values

for the left and right channels.

L or R:

Different adjustment values can be

set for the left and right channels.

Turn the Rotary encoder to adjust the level ( 9

dB in steps of 1 dB), then press the ENTER

button.

Press the CHANNEL button to select the desired

channel, then press the ENTER button.

P . E

F r o n t

When “L and R (LR)” is selected:

BAND : 4

Front

Rear

Center

Sub. W

F c : 3 . 1 5 k H z

: 2

L v : + 7 d B

When “L or R” is selected:

Front L Front R Rear L

Rear R

Sub. W

Center

*1 When center is set to subwoofer, it is not

displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).

*3 When center is set to subwoofer, it becomes

Sub.W(R).

Turn the Rotary encoder to select the band,

then press the ENTER button.

Adjustable bands

Front/Rear/Center : 5 bands

Sub.W : 2 bands

P . E

P F r o n t

BAND : 4

F c : 3 . 1 5 k H z

: 2

L v : + 7 d B

13-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

NOTES

• When the speaker is set to the “OFF” mode, the

parametric equalizer for that speaker is ineffective.

Refer to “Setting the speakers” (page 4).

• It is not possible to adjust the frequencies of adjacent

bands within 7 steps.

CHANNEL

ENTER

• Check the playable frequency ranges of the connected

speakers before making the equalizer adjustments. If

the speaker's playable frequency range is 55 Hz to 30

kHz, for example, adjusting the 40 Hz or 20 Hz band

has no effect. Additionally, you may overload and

damage the speakers.

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

• When parametric EQ is adjusted, the adjustment for

graphic EQ becomes ineffective.

P.EQ

Repeat steps 5 to 8 to adjust other bands.

10 To adjust other channels, press the CHANNEL

button to return to step 4.

* To compare the factory default settings

(DEFEAT ON) with your newly adjusted

parametric equalizer settings (DEFEAT

OFF), do the following:

1) While in the adjustment mode, press and

hold the P.EQ button for at least 2 seconds.

2) Press the P.EQ button to switch the defeat

mode on and off and listen to the difference

in the sound.

3) To quit, select the desired setting, then press

the ENTER button.

Note that if you press the ENTER button with

the defeat mode turned on, the adjustments

are reset to the defeat on status (the default

values).

11 Once the adjustments are completed, press the

P.EQ button.

14-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

X-OVER

Signals with these frequencies output

The PXA-H701 is equipped with an active

crossover allowing the frequency bands to be

split before amplification. Because of this, there

is no need for a passive network between the

speakers and amplifiers. This makes the

amplifiers fully independent, eliminating the

problem of interference. This also makes it

possible to achieve the optimum acoustic space

by dividing the playback frequencies in a way

suited to the speaker’s response.

Slope OFF

Slope adjustment

20Hz

10kHz

H.P.F. cutoff frequency L.P.F. cutoff frequency

The H.P.F. setting cannot be the same as or

exceed the L.P.F. setting for that channel.

This adjustment requires sufficient knowledge

and experience. If you have problems, we

suggest you have the adjustment made by your

store authorized of Alpine dealer.

•

The crossover network is a filter that divides

specific frequency bands.

The high pass filter is a filter that cuts

frequencies below a certain frequency (bass

frequencies) and lets through treble

frequencies.

The low pass filter is a filter that cuts

frequencies above a certain frequency

(treble frequencies) and lets through bass

frequencies.

The slope is a value expressing the

attenuation of the signal in decibels when the

frequency is increased or decreased by one

octave.

The higher the slope value, the steeper the

slope.

If the slope is set to “OFF”, the signal does

not pass through the filter, so there is no

effect.

In order to protect the speakers, if Tweeter is

selected in Front 1, there is no filter OFF

(slope OFF) setting for H.P.F.

For the same reason, the subwoofer low

pass filter cannot be turned off (the slope

cannot be set to “OFF”.)

Adjust the high pass filter (H.P.F.) and low pass

filter (L.P.F.) and set the slope (filter response

attenuation slope) for the different bands.

Make the adjustments according to the playable

frequency ranges and frequency responses of

the connected speakers.

•

Cutoff frequency

adjustment range

(1/6 octave steps)

Slope adjustment

•

H.P.F.

L.P.F.

H.P.F.

L.P.F.

Front 1

(Front speaker 1)

Select TWEETER

6/12/18/

24/30dB/

Filter OFF

1kHz –

18kHz

1.1kHz – 6/12/18/

20kHz 24/30dB

•

Front 1

(Front speaker 1)

Select FULL RANGE

6/12/18/

24/30dB/

Filter OFF

6/12/18/

22Hz –

20Hz –

18kHz

24/30dB/

20kHz

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

22Hz –

20Hz –

18kHz

Front 2

(Front speaker 2)

24/30dB/

20kHz

•

Tweeters may be damaged if low frequency

signals are input to them.

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

22Hz –

Rear

(Rear speaker)

20Hz –

18kHz

24/30dB/

20kHz

Filter OFF

6/12/18/

24/30dB/

Filter OFF

6/12/18/

22Hz –

Center*

(Center speaker)

20Hz –

18kHz

24/30dB/

20kHz

Filter OFF

6/12/18/

24/30dB

6/12/18/

22Hz –

20Hz –

180Hz

Sub. W

(Subwoofer)

24/30dB/

200Hz

Filter OFF

If center is set as subwoofer, the adjustment

range changes to the range of subwoofer.

15-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

*1 When center is set to subwoofer, it is not

displayed.

*2 When center is set to subwoofer, it becomes

Sub.W(L).

*3 When center is set to subwoofer, it becomes

Sub.W(R).

X-OVER

CHANNEL

ENTER

Turn the Rotary encoder to adjust the H.P.F.

cutoff frequency, then press the ENTER button.

The adjustable bands differ according to the

channel (speaker).

Rotary encoder

X –

V EPR F r o n t 2 1/2

HP f c : 3 5 0

HP s l o p e : 1 2

L P f c : 1 . 8 k

X-OVER adjustment

L P s

o p e : 6

This section describes the procedure for making

the X-OVER adjustment. Before performing this

procedure, see “X-OVER” on page 15.

The SLOPE to FLAT operation from the head unit

may not be performed depending on the head

unit combination.

Turn the Rotary encoder to adjust the H.P.F.

slope, then press the ENTER button.

To set filter off (slope off), press and hold the X-

OVER button for at least 2 seconds.

X –

V EPR F r o n t 2 1/2

HP f c : 3 5 0

Check that the defeat mode is off.

(See page 28.)

HP s l o p e : 1 8

L P f c : 1 . 8 k

L P s

o p e : 6

Press the X-OVER button to set the X-OVER

adjustment mode.

Next, make the adjust for the L.P.F. in the same

way as in steps 5 and 6.

Press and hold the CHANNEL button for at least

2 seconds and select “L and R (LR)” or “L or R”.

L and R (LR)

L or R

Turn the Rotary encoder to adjust the level,

then press the CHANNEL button.

(factory default)

Press the ENTER button to return to step 5.

L and R (LR): Sets the same adjustment values

for the left and right channels.

The level can be adjusted between –12 and 0.

L or R:

Different adjustment values can be

set for the left and right channels.

X –

V EPR F r o n t 2 2/2

L e v e l :

Press the CHANNEL button to select the desired

channel, then press the ENTER button.

– 4 d B

When “L and R (LR)” is selected:

Front 1 Front 2 Rear

Cente^*r¹

Repeat steps 4 to 8 to adjust other channels.

Sub. W

10 Once the adjustments are completed, press the

When “L or R” is selected:

X-OVER button.

Front 1 L Front 1 R Front 2 L Front 2 R

Sub. W

Center

Rear R Rear L

16-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Hint for adjusting the subwoofer

• If the subwoofer is installed on the rear deck,

setting a gentle L.P.F. slope (for example 6 dB/

oct.) makes the sound localization more to the

rear. This can also affect the acoustic

localization of the front.

Hints for adjusting the high range

• Depending on the speaker, inputting low

frequency component signals (about 2 kHz or

less) with the H.P.F. adjustment could result in

distortion. If so, set a steep slope (for example

30 dB/oct.).

When doing so, adjust so that the mid and high

range sounds do not separate.

• Normally use with the L.P.F. off. If the high

range is too strong, we recommend adjusting for

a gentle slope.

Hint for adjusting the low range

• When a subwoofer is connected and you are

using a speaker with a low range of under 10 or

12 cm (3-15/16” or 4-3/4”), setting the low range

H.P.F. to “OFF” can result in distortion when low

frequency components are input.

If so, set the H.P.F. slope to a value suited for the

speaker’s frequency response.

NOTES

• In order to protect the speakers, if Tweeter is selected

in Front 1, there is no filter OFF (slope OFF) setting

for H.P.F.

For the same reason, the subwoofer low pass filter

cannot be turned off (the slope cannot be set to

“OFF”.)

• When the speaker is set to the “OFF” mode, the X-

OVER for that speaker is ineffective. Refer to

“Setting the speakers” (page 4).

• Check the playback frequencies of the connected

speakers before adjusting.

• After making the settings, we recommend storing

them in the memory. For instructions, see page 28.

17-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings/Adjustments

FM: MX1 to 3 and OFF

The medium to high frequencies become

more clear, and produces well balanced

sound in all the bands.

CD: MX1 to 3 and OFF

ENTER

CD mode processes a large quantity of data.

This data is used to reproduce the sound

cleanly by making use of the data quantity.

MP3/XM: MX1 to 3 and OFF

This corrects information that was omitted at

the time of compression. This reproduces a

well-balanced sound close to the original.

DVD/Video CD: MOVIE MX 1~2, MUSIC, OFF

MOVIE MX 1~2: The dialogues of movies

are played with greater clarity.

B.C.

Rotary encoder

MUSIC: Discs containing music clips are

played with a more dynamic sound.

AUX: MP3, MUSIC, MOVIE, OFF

Choose the MX mode (MP3, MUSIC, or

MOVIE) that corresponds to the media

connected.

MX settings

MX (Media Xpander) makes vocals or

instruments sound distinct regardless of the

music source. The radio, CD, and MP3, will be

able to reproduce the music clearly even in cars

with a lot of road noise.

Once the settings are completed, press the MX

button.

NOTES

• Operations cannot be performed when the defeat

mode (page 28) is on.

• Each music source, such as radio, CD, and MP3 can

have its own MX setting.

• If "MX OFF" is set in step 2, the MX mode is set to

off for all music sources.

When “Auto” has been set as the MX mode

setting (see page 27) while using the PXA-

H701 in combination with an Ai-NET head

unit equipped with an automatic MX mode

selection function (IVA-D300, etc.)

In this case, the MX mode is selected

automatically according to the music source on

the head unit. The MX mode can be set from

the PXA-H701 using the operation described

below.

When combining non Ai-Net head unit

products

When combining Ai-Net head unit products

without MX interlocking function

When combining Ai-Net head unit products

(IVA-D300, etc.) with MX interlocking function

considering that “MX mode setting” (page 27)

is set to “Manual”.

In these cases, the PXA-H701 is not interlocked

with the head unit, therefore it is necessary to set

the MX from the PXA-H701 with the operations

below.

Press the MX button to set the MX setting mode.

In case of “MX OFF”, press and hold the MX

button for at least 2 seconds to turn the MX

mode on.

Turn the Rotary encoder to select the desired

mode, then press the ENTER button.

•

When “OFF” is selected, the MX effect is

turned off.

The level for the currently selected music

source (radio, CD, etc.) can be adjusted.

Press the MX button to set the MX setting mode.

•

In case of “MX OFF”, press and hold the MX

button for at least 2 seconds to turn the MX

mode on.

18-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn the Rotary encoder to select the source

(media) you want to set, then press the ENTER

button.

Turn the Rotary encoder to select the desired

mode, then press the ENTER button.

For further information about setting mode, see

step 3 of

(page 18).

NOTE

This function is equipped to work anywhere in the

world, and it is possible to set to “DAB”. This mode is

a specification developed for use abroad, but like

“MP3/XM", can have the same effect as “MX” . If set

to “MD”, it also has the same effect as “MP3/XM”.

To set other sources (media), press the MX

button and return to step 3.

Once the settings are completed, press the MX

button repeatedly.

NOTES

• Operations cannot be performed when the defeat

mode (page 28) is on.

• The source (media), such as radio, CD, and MP3 can

be set.

• “MX OFF” can be set in step 2.

BASS COMP. setting

The sound of the low frequencies can be

adjusted to suit your tastes.

Check that the defeat mode is off.

(See page 28.)

Press the B.C. button to set the “BASS COMP.”

setting mode.

In case of “BASS COMP. OFF”, press and hold

the B.C. button for at least 2 seconds to turn the

BASS COMP. mode on.

Turn the Rotary encoder to select the desired

mode, then press the ENTER button.

As the bass level increases in order of BASS

COMP. 1, BASS COMP. 2, BASS COMP. 3, you

can enjoy listening to the powerful sound.

Once the settings are completed, press the B.C.

button.

NOTE

“BASS COMP. OFF” can be set in step 3.

19-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Dolby Surround

* If DOLBY PL II MUSIC is selected, the

center width can be adjusted with following

operations.

This function offers the optimum vocal position

by adjusting the center channel position

between the center speaker and the L/R

speaker. (The adjustments established in

“Adjusting the acoustic image” (page 24) are

ineffective while this function is activated.)

1) After selecting DOLBY PL II MUSIC, within

ENTER

15 seconds, press and hold the

PLII/

REAR FILL

REAR FILL button for at least 2 seconds.

2) Turn the Rotary encoder to select “Center

Width ON” or “Center Width OFF”, then

press the ENTER button.

DISP

Rotary encoder

When the setting is turned ON, the optimum

vocal position is offered by adjusting the

center channel position between the center

speaker and the L/R speaker.

Using the Pro Logic II mode

With the PXA-H701, Pro Logic processing can be

conducted on the music signals recorded on two

channels to achieve Dolby Pro Logic II surround

sound. For two-channel Dolby Digital and DTS

signals, there is also a “REAR FILL” function for

outputting the signals of the front channel to the

rear channel.

3) Turn the Rotary encoder to adjust the level,

then press the ENTER button.

The level can be adjusted between 0 to 7.

When the level increases, the center channel

position moves from the center speaker

position to both side.

4) After the setting, press and hold the

PLII/REAR FILL button for at least 2

seconds.

Press the

the desired mode.

The setting mode is canceled if no operation is

performed within 15 seconds after the mode is

selected.

PLII/REAR FILL button and select

NOTES

• Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

• This adjustment is ineffective if the center speaker is

set to “OFF” or “Sub.W” in the speaker setup

settings.

DOLBY PL II MOVIE DOLBY PL II MUSIC

OFF

REAR FILL

Once the settings are completed, press the DISP

button.

NOTES

DOLBY PL II MOVIE: Suits the stereo TV

shows and all programs

encoded in Dolby

• This function only works with two-channel signals.

This operation is ineffective when 5.1-channel DTS

or Dolby Digital signals are input.

• “REAR FILL” function

Surround. It improves

the sound field

directivity to near that of

discrete 5.1-channel

sound.

Depending on the input signals, the sound may only

be output from the front speakers. In this case, the

“REAR FILL” function can be used to output signals

from the rear speakers as well.

• If the setting of REAR FILL is made when REAR MIX

is ON, sound is unchanged in the rear fill setting

because REAR MIX is given priority during 2

channel decoder other than linear PCM.

• For linear PCM signals, the voice is output from the

rear speaker regardless of the REAR FILL and REAR

MIX setting.

DOLBY PL II MUSIC: Can be used for all

stereo music

recordings, and

provides a wide, deep

sound field.

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

20-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustment procedure for Dolby Surround

Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater

accuracy.

Adjustment procedure

Speaker setup (page 22)

(Turning the speakers to be used on and off and setting their response)

Adjusting the speaker levels (page 22)

(Adjusting the signal output level to the various speakers)

Mixing bass sound to the rear channel (page 23)

(Achieving smooth sound in the rear seat by mixing the front audio

signals with the rear speaker signals)

Adjusting the acoustic image (page 24)

(Adjusting the acoustic image to achieve a sound as if the center

speaker were directly in front of the listener)

Achieving powerful high volume sound (page 25)

(Achieving energetic sound with even greater power, like the sound in a

movie theater)

Adjusting the DVD level (page 25)

(Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS

and PCM modes.)

Storing settings in the memory (page 28)

(Storing all the settings and adjustments made on the PXA-H701 (not

only the above settings/adjusts) in the memory)

NOTE

In case of combining the Automatic adjustments etc.

We recommend to make the Automatic adjustments before the Dolby Surround adjustments.

21-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Dolby Surround

OFF:

When no speaker is connected

SMALL:

When a speaker that cannot play low

frequencies (80 Hz or less) is connected

LARGE:

CHANNEL

ENTER

When a speaker that can play low frequencies

(80 Hz or less) is connected

*1: It is not possible to set the front speakers to

“OFF”.

*2: If the front speakers are set to “SMALL”, the

rear and center speakers cannot be set to

“LARGE”.

SETUP

Rotary encoder

Press the SETUP button repeatedly to quit the

setup mode.

Speaker setup

NOTES

• If the center speaker is turned "OFF", the center

channel's audio signals are added to the audio

signals output from the front speakers.

• If you set the speaker response to “OFF”, also set

the speaker setting to “OFF”. (See page 4.)

• Perform the setup for all the speakers (“Front”,

“Center”,“Rear” and “Sub. W”). If not, the sound

may not be balanced.

• When center is set to subwoofer, the setting is

ineffective even if center is set with this function.

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

• Through changing the settings on each speaker, a

change in the output of the other speakers may occur

due to the setting requirements.

• When using the PRO LOGIC II, if the rear speaker is

set to "LARGE", then there will be no output from the

sub-woofer.

The PXA-H701 can be set according to the

playable frequency range of your speakers.

Check the playable frequency range of the

speakers (not including the subwoofer) before

performing this operation to verify whether the

speakers can play low frequencies (of about 80

Hz or less).

NOTE

Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

Press the SETUP button.

The setup mode is set.

Adjusting the speaker levels

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

Use the PXA-H701’s test tones to make the

volume adjustments of the different speakers.

When levels are equal, a strong sense of

presence can be heard from the different

speakers at the listening position.

Turn the Rotary encoder to select the

“SPEAKER SETUP”, then press the ENTER

button.

NOTE

Press the CHANNEL button to select the

speaker, then press the ENTER button.

Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

Front

Center

Rear

Sub. W

Turn the Rotary encoder to select the speaker

property, then press the ENTER button.

Repeat steps 4 and 5 to set the various items.

Press the SETUP button.

The setup mode is set.

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

OFF

SMALL

LARGE

Turn the Rotary encoder to select “OUTPUT

LEVEL”, then press the ENTER button.

(Subwoofer is only ON/OFF.)

22-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn the Rotary encoder to select “Auto”, then

press the ENTER button. Test tone output is

repeated for each of the different speaker

channels. They will be repeated in the order

shown below.

Mixing bass sound to the rear channel

This function mixes the front channel audio

signals to the audio signals output from the rear

speakers, improving the sound in the vehicle’s

rear seat.

If no operation is performed for 2 seconds, the

channel switches to the next channel.

NOTE

L (Left front)

C (Center) R (Right front)

RS (Right surround)

Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

LS (Left surround)

While the test tones are being produced from the

speakers, turn the Rotary encoder to adjust so

that the volume of the different speakers is

equal.

Press the SETUP button.

The setup mode is set.

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER buton.

•

The adjustment range for the different

speakers is 10 dB.

•

Adjust based on the front speakers.

Turn the Rotary encoder to select “REAR MIX”,

then press the ENTER button.

Press the SETUP button repeatedly to quit the

setup mode.

Turn the Rotary encoder to select “REAR MIX

ON” or “REAR MIX OFF”, then press the ENTER

button.

When set to “ON”, the front audio signals are

mixed into the audio signals output from the rear

speakers.

Adjusting the level for individual speakers

(manual)

1) At step 4 above, select “Manual”, then press the

ENTER button.

2) Press the CHANNEL button or ENTER button to

select the speaker you wish to adjust.

3) Turn the Rotary encoder to adjust the output

level.

4) Repeat steps 2) and 3) above to adjust the levels

of the different speakers.

5) Press the SETUP button again to quit the setup

mode.

Turn the Rotary encoder to adjust the level,

then press the ENTER button.

The level can adjusted in five steps: –6, –3, 0, +3

and +6. The higher the level, the more bass is

output from the rear speakers. (The effect differs

according to the software (DVD, etc.).)

Once the settings are completed, press the

SETUP button repeatedly to quit the setup

mode.

NOTES

• If a speaker is set to the off mode, that speaker’s level

adjustment cannot be made.

NOTES

Refer to “Speaker setup” (page 22).

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

• This adjustment is ineffective when the rear speaker

setup setting is set to “OFF”.

• For linear PCM signals, the voice is output from the

rear speaker regardless of the REAR FILL and REAR

MIX setting.

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

23-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Dolby Surround

Turn the Rotary encoder to adjust the level,

then press the ENTER button.

The level can be adjusted within the range of –5

to +5. The higher the level, the more the position

of the center speaker is shifted to the sides.

ENTER

Once the settings are completed, press the

SETUP button repeatedly to quit the setup

mode.

NOTES

• This adjustment is ineffective if the center speaker is

set to “OFF” or “Sub.W” in the speaker setup

settings.

SETUP

Rotary encoder

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

Adjusting the acoustic image

In most installations, the center speaker must be

placed directly between the front passenger and

driver. Using this function, the center channel

information is distributed to the left and right

speakers. This creates an acoustic image

simulating a center speaker directly in front of

each listener. Adjusting the center width in

DOLBY PL II MUSIC (see “Using the Pro Logic II

mode”, page 20), makes this function ineffective.

NOTE

Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

Press the SETUP button.

The setup mode is set.

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

Turn the Rotary encoder to select “BI-

PHANTOM”, then press the ENTER button.

Turn the Rotary encoder to select “BI-

PHANTOM ON” or “BI-PHANTOM OFF”, then

press the ENTER button.

When set to “ON”, the center channel

information is distributed to the left and right

speakers. This creates an acoustic image

simulating a center speaker directly in front of

each listener.

24-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Achieving powerful high volume sound

Adjusting the DVD level

The volume (signal level) for the Dolby Digital,

Pro Logic II, DTS and PCM modes can be set.

With Dolby Digital, the dynamic range is

compressed so that powerful sound can be

achieved at regular volume levels. This

compression can be canceled to achieve an

energetic sound with even greater power, like the

sound in a movie theater.

NOTE

Avoid stopping, pausing, switching the disc, cueing,

fast-forwarding or switching the audio channel of the

player while making this adjustment. The setting is

canceled if the decode mode is switched.

NOTE

This function works only in the Dolby Digital mode.

Press the SETUP button.

The setup mode is set.

Press the SETUP button.

The setup mode is set.

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

Turn the Rotary encoder to select the “5.1CH

SETUP” mode, then press the ENTER button.

Turn the Rotary encoder to select the “DVD

LEVEL”, then press the ENTER button.

Turn the Rotary encoder to select “LISTENING

MODE”, then press the ENTER button.

Press the ENTER button to select the mode to

be adjusted.

Turn the Rotary encoder to select “STANDARD”

or “MAXIMUM”, then press the ENTER button.

DOLBY D

(DOLBY DIGITAL)

DOLBY PL II

DTS

PCM

STANDARD

MAXIMUM

Turn the Rotary encoder to adjust the level.

STANDARD:

For powerful sound at regular volume levels

MAXIMUM:

The level can be adjusted in the range of –5 to

+5.

For powerful sound at high volumes

Repeat steps 4 and 5 to set the levels for the

various modes.

Once the settings are completed, press the

SETUP button repeatedly to quit the setup

mode.

Press the SETUP button repeatedly to quit the

setup mode.

NOTES

• Keep the volume to a level at which sounds outside

the vehicle can still be heard.

• This function may have no effect, depending on the

type of software (DVD, etc.).

• Once the settings are made, we recommend storing

them in the memory. See page 28 for instructions.

NOTE

After making the settings, we recommend storing them

in the memory. For instructions, see page 28.

25-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient Functions

Press the SETUP button repeatedly to quit the

setup mode.

NOTE

For connection with navigation, refer to the

"Installation and Connections" (page 40).

ENTER

Linear PCM setting

The output when playing discs recorded in linear

PCM can be set to 2 or 3 channels.

SETUP

Rotary encoder

Press the SETUP button.

The setup mode is set.

Navigation system voice guidance

interruption (only when using the control

unit sold separately)

Turn the Rotary encoder to select the “PCM

MODE”, then press the ENTER button.

Turn the Rotary encoder to select “2ch Output”

or “3ch Output”, then press the ENTER button.

When the navigation system is connected, make

the navigation system’s voice guidance

messages to interrupt the PXA-H701, then

output from the front speaker.

2ch Output: 2ch output (L/R)

3ch Output: 3ch output (L/R/CENTER)

Press the SETUP button repeatedly to quit the

setup mode.

Press the SETUP button.

The setup mode is set.

NOTE

This PCM mode is ineffective if the center speaker is set

to “OFF” or “Sub.W” in the speaker setup settings.

Turn the Rotary encoder to select the “NAVI

MIX” mode, then press the ENTER button.

Turn the Rotary encoder to select “NAVI MIX

ON” or “NAVI MIX OFF”, then press the ENTER

button.

When ON is set, the navigation system's voice

guidance messages interrupts the PXA-H701.

Turn the Rotary encoder to adjust the “MIX

LEVEL” (volume level of navigation voice), then

press the ENTER button.

The level can be adjusted from 1 to 15.

Turn the Rotary encoder and set “GUIDE

CONT.” to “2”, then press the ENTER button.

Do not use “1”.

26-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Display settings

MX mode setting (Ai-NET connection)

Use this setting when using the PXA-H701 in

combination with an Ai-NET head unit equipped

with the automatic MX mode selection function

(for example, IVA-D300).

The display’s contrast and LCD (negative/

positive) can be adjusted.

Press the SETUP button.

The setup mode is set.

When the MX mode is set to “Auto”, the MX

settings of the head unit (the MX modes for the

different music sources) are sent to the PXA-

H701.

Turn the Rotary encoder to select the “DISPLAY

SETUP” mode, then press the ENTER button.

Turn the Rotary encoder to adjust

Press the SETUP button.

The setup mode is set.

“CONTRAST”, then press the ENTER button.

Adjust the contrast (color depth) between –8~+8

so that the display is easy to see.

Turn the Rotary encoder to select the “MX

MODE”, then press the ENTER button.

Turn the Rotary encoder to perform the “LCD

MODE” setting, then press the ENTER button.

Set the display to “POSITIVE (Pos.)” or

Turn the Rotary encoder to select “Auto” or

“Manual”, then press the ENTER button.

“NEGATIVE (Neg.)” according to your tastes.

Auto:

Once the settings are completed, press the

SETUP button repeatedly to quit the setup

mode.

When the PXA-H701 is used in combination

with an Ai-NET head unit equipped with the

automatic MX mode selection function (for

example, IVA-D300), the MX settings of the

head unit are sent to the PXA-H701.

In addition, the MX mode switches

automatically according to the music source

selected by the head unit.

Manual:

Perform the MX operations on the PXA-

H701.

Press the SETUP button repeatedly to quit the

setup mode.

27-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Convenient Functions

Calling out stored values

Press any button from 1 to 6 to select the preset

memory you want to call out (“MEMORY1” to

“MEMORY6”).

In the preset memory, numerous settings/

adjustments are stored. Therefore, it may take

some time to access the stored preset memory.

I NG

DEFEAT

1~6

DISP

PRESET

MEMORY 1

NOTE

This operation can only be performed when the defeat

mode is turned off.

Storing settings in the memory

This function can store up to 6 adjustments/

settings.

Defeat mode

The following adjustments/settings are stored in

a preset memory. For more details, see each

page for the below items.

Press the DEFEAT button.

All properties are made flat.

Page 4: Speakers Setting / Pages 6 - 11: Time

Correction/Phase Switching/Bass Focus Setting /

Pages 12 - 14: Equalizer Adjustment / Pages 15 -

17: X OVER Adjustment / Pages 18 - 19: MX

Settings / Page 19: BASS COMP. Setting / Page

20: Pro Logic II Mode Setting/Center Width

Adjustment* / Pages 21 - 25: Dolby Surround

adjustment* / Page 26: Linear PCM Setting*

*Depending on the signal input, there is no

effect.

DEFEAT

Press the DEFEAT button again to cancel.

NOTES

• The “Parametric EQ”, “Graphic EQ”, “AUTO

TCR”, “TCR/phase switching”, “MX”, “X-OVER”

and “BASS COMP. setting” operations cannot be

performed when the defeat mode is turned on.

• To protect the speakers, the “X-OVER” setting does

not change.

Make the adjustment or setting you want to store

in the memory.

Press and hold any button from 1 to 6 for at least

2 seconds to store the setting into preset

memory (“MEMORY1” to “MEMORY6”).

SAV

PRESET

MEMORY 2

NOTES

• This operation can only be performed when the

defeat mode is turned off.

• The stored contents will not be deleted even when the

battery power cord is detached.

28-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Switching the display mode

Press the DISP button to select the desired

display mode.

Spectrum analyzer display(1~3)

Display OFF

Input channel display

Example of input channel (When

monaural surround signal (s) is

not inputted)

Preset No.

Equalizer setting

I NPU T CH

P– 2

display

Displays whether

the current EQ

setting is graphic

EQ or parametric

EQ.

L F E

L s

R s

G: Graphic EQ

P: Parametric EQ

The display changes according to the

input signals. The indicated items are

highlighted when there is no input.

Left front channel

Right front channel

Center channel

Ls:

Rs:

Left surround channel

Right surround channel

Monaural surround signal

LFE: Low frequency deep bass signal

29-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

Before installing or connecting the unit, please

read the following and pages 2 and 3 of this

manual thoroughly for proper use.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND

CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or

any other safety-related system), or tanks should NEVER

be used for installations or ground connections. Using

such parts could disable control of the vehicle and cause

fire etc.

Warning

DO NOT DISASSEMBLE OR ALTER.

Doing so may result in an accident, fire or electric shock.

DO NOT INSTALL THE MONITOR NEAR THE

PASSENGER SEAT AIR BAG.

USE THE CORRECT AMPERE RATING WHEN

REPLACING FUSES.

If the unit is not installed correctly the air bag may not

function correctly and when triggered the air bag may

cause the monitor to spring upwards causing an accident

and injuries.

Failure to do so may result in fire or electric shock.

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire

or product damage.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result

in fire.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE

GROUND.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT

OF THE REACH OF CHILDREN.

(Check with your dealer if you are not sure.) Failure to do

so may result in fire, etc.

Swallowing them may result in serious injury. If

swallowed, consult a physician immediately.

BEFORE WIRING, DISCONNECT THE CABLE FROM

THE NEGATIVE BATTERY TERMINAL.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT

HINDER VEHICLE OPERATION, SUCH AS THE

STEERING WHEEL OR GEARSHIFT.

Failure to do so may result in electric shock or injury due

to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED

IN SURROUNDING OBJECTS.

Doing so may obstruct forward vision or hamper

movement etc. and results in serious accident.

Arrange wiring and cables in compliance with the manual

to prevent obstructions when driving. Cables or wiring

that obstruct or hang up on places such as the steering

wheel, gear lever, brake pedals, etc. can be extremely

hazardous.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY

DO NOT SPLICE INTO ELECTRICAL CABLES.

EXPERTS.

Never cut away cable insulation to supply power to other

equipment. Doing so will exceed the current carrying

capacity of the wire and result in fire or electric shock.

The wiring and installation of this unit requires special

technical skill and experience. To ensure safety, always

contact the dealer where you purchased this product to

have the work done.

DO NOT DAMAGE PIPE OR WIRING WHEN

DRILLING HOLES.

USE SPECIFIED ACCESSORY PARTS AND INSTALL

THEM SECURELY.

When drilling holes in the chassis for installation, take

precautions so as not to contact, damage or obstruct pipes,

fuel lines, tanks or electrical wiring. Failure to take such

precautions may result in fire.

Be sure to use only the specified accessory parts. Use of

other than designated parts may damage this unit

internally or may not securely install the unit in place.

This may cause parts to become loose resulting in hazards

or product failure.

30-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Precautions

•

Be sure to disconnect the cable from the (–) battery

post before installing your PXA-H701. This will

reduce any chance of damage to the unit in case of a

short-circuit.

Be sure to connect the color coded leads according to

the diagram. Incorrect connections may cause the unit

to malfunction or damage to the vehicle’s electrical

system.

When making connections to the vehicle’s electrical

system, be aware of the factory installed components

(e.g. on-board computer). Do not tap into these leads to

provide power for this unit. When connecting the

PXA-H701 to the fuse box, make sure the fuse for the

intended circuit of the PXA-H701 has the appropriate

amperage. Failure to do so may result in damage to the

unit and/or the vehicle. When in doubt, consult your

ALPINE dealer.

Route the cables and wiring away from moving parts (like

the seat rails) or sharp or pointed edges. This will prevent

crimping and damage to the wiring. If wiring passes

through a hole in metal, use a rubber grommet to prevent

the wire’s insulation from being cut by the metal edge of

the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH

MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence

of moisture or dust. Moisture or dust that penetrates into

this unit may result in product failure.

•

The PXA-H701 uses female RCA-type jacks for

connection to other units (e.g. amplifier) having RCA

connectors. You may need an adaptor to connect other

units. If so, please contact your authorized ALPINE

dealer for assistance.

Wiring Connections

Improper wiring connections could cause serious damage

to your audio system. Be sure you:

1. DO NOT connect (–) wires from left and right speakers

together.

2. DO NOT ground any speaker wires.

3. DO NOT run wires where they may be pinched or cut.

4. DO NOT leave bare speaker terminals exposed. They

may contact the vehicle chassis and cause a short.

Fuse

When replacing the fuse(s), the replacement fuse must be

of the same amperage as shown on the fuse holder. If the

fuse(s) blows more than once, carefully check all

electrical connections for shorted circuitry. Also have your

vehicle’s voltage regulator checked. Do not attempt to

repair the unit yourself; return it to your Alpine dealer or

nearest Alpine Service Station for servicing.

Temperature

In order to ensure proper performance, be sure the

temperature in your vehicle is above 14°F (–10°C) and

below 140°F (60°C) before turning your unit on. Good air

circulation is essential to prevent internal heat build-up in

the unit.

31-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

Accessories

IMPORTANT

Please record the serial number of your unit in

Velcro fastener for

mounting control

unit or base unit

Connection Cable

Ai-NET cable

the space provided below and keep it as a

permanent record. The serial number plate is

located on the bottom of the unit.

x 2

SERIAL NUMBER:

Flanged self-

tapping screw

(M4 x 14)

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

x 4

To prevent external noise from entering the

audio system.

• Locate the unit and route the leads at least 10 cm away

from the car harness.

• Keep the battery power leads as far away from other

leads as possible.

• Connect the ground lead securely to a bare metal spot

(remove any paint, dirt or grease if necessary) of the

car chassis.

• If you add an optional noise suppressor, connect it as

far away from the unit as possible.

Your Alpine dealer carries various noise suppressors.

Contact them for further information.

• Your Alpine dealer knows best about noise prevention

measures so consult your dealer for further

information.

32-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Mount the control unit using the included screws.

Installation

Bracket

Mounting the control unit (Sold Separately)

Spacer

CAUTION:

Do not install the control unit near the air-bag of the

front passenger’s seat.

Control unit

•

Confirm the installation location will be safe.

Determine the mounting position on the

dashboard. The area should be large enough to

center the unit and reasonably flat.

Pan head screw

(M3 x 5) x 2

Mount the previously removed inner case into

the dashboard. Slide the control unit into the

Installation using Velcro fastener

case.

Dashboard

Velcro fastener

Control unit

Inner case

Face plate

1. Without separating the two pieces of Velcro

fastener, peel off the paper backing on one side

and place on the back of the control unit.

2. Make sure the location selected is free from

moisture or dirt. Peel off the backing paper from

the other side of the Velcro fastener on the

control.

After step 2 on “Mounting other units” of

“Mounting the control unit”, remove the side

bracket.

Side bracket

3. Place the control unit on the mounting location

and press the unit firmly to mount securely.

Mounting other units

Remove the face plate.

Side bracket

Mount the control unit using the included screws.

Bracket

Spacer

Face plate

Control unit

Use a screwdriver, etc., to slide the locking pin,

then take out the inner case.

Pan head screw

(M3 x 5) x 2

Inner case

Locking pin

33-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

Mount the spacer and bracket to the control unit.

Next, securely mount the factory brackets

removed from the factory radio, to the control

unit assembly.

Mount the spacer on the control unit using the

included screws.

Spacer

Flat head screws (M5 x 8)

Control unit

Pan head screw

(M3 x 5) x 2

Attach the flush mount brackets to the control

unit using the included screws. Mount this

assembly into the prepared cut-out.

Flush mount

Bracket

Flush Mounting the control unit

Make a cut-out approximately 178 (width) by 50

(height) mm (7 inches by 2 inches) in size at

your desired mounting location.

Self-tapping screw

(M2.6 x 8) x 4

Face plate

WARNING

When making cut-outs, be careful not to

damage pipes, tanks, electric wires, etc. Doing

so could lead to accidents or fire.

After step 2 on “Mounting other units” of

“Mounting the control unit” page 33, remove the

side bracket.

Side bracket

Remove the spacer from the bracket.

Bracket

Spacer

34-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ Using the Mounting Screws (Supplied)

The Base Unit can be mounted under the seat

using the mounting screws.

Mounting the base unit

ꢀ Velcro Fastener Mounting

Decide on the installation location.

• The trunk, etc., is the best place.

Mark the positions of the mounting screws at the

chosen location.

Drill 3 mm (1/8”) holes or smaller.

WARNING

When making holes, be careful not to damage

pipes, tanks, electric wires, etc. Doing so could

lead to accidents or fire.

Securely mount the unit using the four included

flanged self-tapping screws (M4 x 14).

Velcro fastener

Flanged self-tapping

screw (M4 x 14)

Attach to the vehicle (such as under the

dashboard).

35-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

Basic Connections Diagram

CAUTION

Do not connect or disconnect the

display cable when the power of the

unit is on.

Display

(Sold Separately)

Terminal specifications

Connect to:

•

Head unit input terminal (optical digital input)

Used for system expansion (Ai-NET head unit, etc.).

Connect to an Ai-NET product

using an optical fiber cable.

Changer input terminal (optical digital input)

Used for system expansion (Ai-NET changer, etc.).

Connect to an Ai-NET product

using an optical fiber cable.

DVD player input terminal (optical digital input)

Used for system expansion (DVD player, etc.).

Connect to an Ai-NET product

using an optical fiber cable.

CENTER

SELECTABLE

SUBWOOFER

(L)

(R)

CD/DVD H.U.

DIGITAL

CHG

DVD

DIGITAL

MIC

CONTROL UNIT

FRONT

REAR SUBWOOFER

OUTPUT

INPUT

GUIDE

(L)

ANALOG

(R)

Ai–NET IN

ANALOG

CHANGER IN

ANALOG

(FULL RANGE

/TWEETER)

POWER SUPPLY

Cord colors and cord/terminal specifications

Connect to:

•

Remote ON cable

Connect to the head unit for RCA connections.

(Non Ai-NET connection)

Blue/

White

Used for RCA connections.

(Non Ai-NET connection)

Blue/

White

•

Remote OUT cable

Connect to the amplifier or other peripheral device.

Used to add an amplifier.

•

Guide control cable

Used to interrupt the navigation system’s sound.

White/

Green

Connect to the navigation system.

Fuse

(3A)

Battery power cable

Power is supplied constantly to the PXA-H701 regardless

of whether the engine key is on or off.

Connect this lead to the positive(+) post of

the vehicle's battery.

Yellow

Black

•

Ground cable

Connect securely to a metal part of the vehicle’s body.

Connect to the vehicle’s body.

Connect to an Ai-NET product using an Ai-NET cord.

For connection to the PXA-H701, use the straight

side.

Changer input terminal (Ai-NET input)

Used for system expansion (Ai-NET changer, etc.).

Connect to an Ai-NET product using an Ai-NET cord.

For connection to the PXA-H701, use the straight

side.

•

Ai-NET input terminal (Ai-NET input)

Used for system expansion (DVD player, etc.).

Audio input jacks (RCA inputs)

Used to input the audio output signals of a head unit

connected with RCA connections to the PXA-H701.

Used for RCA connections.

Connect to the head unit.

•

Navigation audio input jack (RCA input)

Used to input the audio output signals of a navigation

system.

Connect to the navigation system.

Used for automatic adjustment.

•

Microphone jack

Use this to connect a microphone.

Connect to the amplifier for the center

speaker or subwoofer.

Center speaker or subwoofer output jack (RCA output)

Outputs signals for driving the center speaker or subwoofer.

•

Subwoofer output jack (RCA outputs)

Outputs signals for driving the subwoofer.

Connect to the amplifier for the subwoofer.

Connect to the amplifier for the rear speaker.

Rear speaker output jacks (RCA outputs)

Outputs signals for driving the rear speakers.

Connect to the amplifier for the front 2

speaker.

Front 2 speaker output jacks (RCA outputs)

Outputs signals for driving the front 2 speakers.

Front 1 speaker output jacks (RCA outputs)

Outputs signals for driving the front 1 speakers.

Connect to the amplifier for the front 1

speaker.

36-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Examples of system expansion

• PXA-H701 + Ai-NET Compatible Head Unit + DVD Changer +

Monitor + External Amplifier

Fiber Optic Cable (Sold Separately)

Remote Control

Input Cable

Remote Control Output Cable

Monitor

(White/Brown)

(TME-M790 etc.)

To Video Input Jack

RCA Connection Cable

Fiber Optic Cable (Included with DVD Changer)

To Video Output Jack

DVD Changer

Ai-NET Cable (Included with DVD Changer)

Ai-NET Cable (Included)

Ai-NET Compatible

Head Unit

CENTER

SELECTABLE

SUBWOOFER

(L)

(R)

CD/DVD H.U.

DIGITAL

CHG

DVD

DIGITAL

MIC

System Switch

CONTROL UNIT

OUTPUT

FRONT

REAR SUBWOOFER

INPUT

GUIDE

(L)

ANALOG

(R)

Ai–NET IN

ANALOG

CHANGER IN

ANALOG

(FULL RANGE

/TWEETER)

POWER SUPPLY

DIV

Blue/White

Remote OUT Cable

Blue/White

To External Amplifier Remote ON Cable

Not used in this system

Remote ON Cable

White/green

Guide Control Cable

Connect to a metal part of

chassis body with a screw.

Grounding Cable

Battery

Battery Power Cable

Center Output or Subwoofer Output (L)*

Subwoofer Output or Subwoofer Output (R)*

Rear Output (L)

Rear Output (R)

To External Amplifier

Front 2 Output (L)

Front 2 Output (R)

Front 1 Output (L)

Front 1 Output (R)

* When the subwoofer is connected to the

center speaker output jack, it becomes

subwoofer output (L or R).

In this case, change the setting of the center

speaker to subwoofer in “Setting the speakers”

(page 4).

NOTE

Please observe the following when using Fiber Optic Cable.

• Do not coil the Fiber Optic Cable smaller than a 30mm radius.

• Do not place anything on top of the Fiber Optic Cable.

# Used for connection to an optical digital

compatible head unit.

37-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

• PXA-H701 + Ai-NET Compatible Head Unit + CD Changer +

External Amplifier

Fiber Optic Cable (Sold Separately)

Ai-NET Cable (Included with CD Changer)

Ai-NET Cable (Included)

###

Ai-NET Compatible

CD Changer

Ai-NET Compatible

Head Unit

CENTER

SELECTABLE

SUBWOOFER

(L)

(R)

CD/DVD H.U.

DIGITAL

CHG

DVD

DIGITAL

MIC

System Switch

CONTROL UNIT

OUTPUT

FRONT

REAR SUBWOOFER

INPUT

GUIDE

(L)

ANALOG

(R)

Ai–NET IN

ANALOG

CHANGER IN

ANALOG

(FULL RANGE

/TWEETER)

POWER SUPPLY

DIV

Blue/White

Remote OUT Cable

Blue/White

To External Amplifier Remote ON Cable

Not used in this system

Remote ON Cable

White/green

Guide Control Cable

Connect to a metal part of

chassis body with a screw.

Grounding Cable

Battery

Battery Power Cable

Center Output or Subwoofer Output (L)*

Subwoofer Output or Subwoofer Output (R)*

Rear Output (L)

Rear Output (R)

To External Amplifier

Front 2 Output (L)

Front 2 Output (R)

Front 1 Output (L)

Front 1 Output (R)

* When the subwoofer is connected to the

center speaker output jack, it becomes

subwoofer output (L or R).

In this case, change the setting of the center

speaker to subwoofer in “Setting the speakers”

(page 4).

NOTES

When connecting a Optical Digital CD

Changer

## Used for connection to an optical

digital compatible head unit.

### When connecting a Optical Digital CD

Changer, change the Digital/Analog

switch of the CD Changer to “2”

(Digital Output)

NOTE

Please observe the following when using Fiber Optic Cable.

• Do not coil the Fiber Optic Cable smaller than a 30mm radius.

• Do not place anything on top of the Fiber Optic Cable.

38-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

• PXA-H701 + Head Unit + Video Deck etc. + External Amplifier

•

For connecting a head unit with which Ai-NET connections are not possible.

Blue/White

Remote OUT cable

Remote ON Cable

RCA connection cable

Head Unit

TV Tuner,

Video etc.

Ai-RCA Conversion Cable

(Sold Separately)

RCA connection cable

Audio

Output

CENTER

SELECTABLE

SUBWOOFER

(L)

(R)

CD/DVD H.U.

DIGITAL

CHG

DVD

DIGITAL

MIC

CONTROL UNIT

OUTPUT

FRONT

REAR SUBWOOFER

INPUT

GUIDE

(L)

ANALOG

(R)

Ai–NET IN

ANALOG

CHANGER IN

ANALOG

(FULL RANGE

/TWEETER)

POWER SUPPLY

Blue/White

Remote OUT Cable

White/green

To External Amplifier Remote ON Cable

Not used in this system

Guide Control Cable

Connect to a metal part of

chassis body with a screw.

Grounding Cable

Battery

Battery Power Cable

Center Output or Subwoofer Output (L)*

Subwoofer Output or Subwoofer Output (R)*

Rear Output (L)

Rear Output (R)

To External Amplifier

Front 2 Output (L)

Front 2 Output (R)

Front 1 Output (L)

Front 1 Output (R)

* When the subwoofer is connected to the

center speaker output jack, it becomes

subwoofer output (L or R).

In this case, change the setting of the center

speaker to subwoofer in “Setting the speakers”

(page 4).

NOTE

When using the PXA-H701 with a non-Ai-NET head unit, +12V is required on this line to turn on the equalizer. If your

head unit does not have a remote-on or power-antenna turn-on wire, an SPST switch must be connected between an

ignition source and this terminal. The PXA-H701 can then be turned on using this switch.

The PXA-H701 can be used with any head unit. However, only an Alpine Ai-NET compatible head unit will be able to

take full advantage of all the features and functions of this processor.

39-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and Connections

• PXA-H701 + IVA-D300 Head Unit + CD Changer + Navigation

System + External Amplifier

White/Green

Guide Control Cable

NTSC

RGB

VIDEO OUTPUT

NAVIGATION

INPUT

Navigation

NTSC VIDEO

GUIDE OUTPUT OUTPUT RGB OUTPUT REMOTE INPUT

KCE-900E

(Sold Separately)

RCA connection cable

RGB Cable

(Sold Separately)

Fiber Optic Cable (Sold Separately

)

IVA-D300

Head Unit

Fiber Optic Cable

(Sold Separately)

Ai-NET Cable

(Included with CD Changer)

Ai-NET Cable (Included)

Ai-NET Compatible

CD Changer

CENTER

SELECTABLE

SUBWOOFER

(L)

(R)

CD/DVD H.U.

DIGITAL

CHG

DVD

DIGITAL

MIC

CONTROL UNIT

OUTPUT

FRONT

REAR SUBWOOFER

INPUT

GUIDE

(L)

ANALOG

(R)

Ai–NET IN

ANALOG

CHANGER IN

ANALOG

(FULL RANGE

/TWEETER)

POWER SUPPLY

Blue/White

Remote OUT Cable

Blue/White

Remote ON Cable

To External Amplifier Remote ON Cable

Not used in this system

Connect to a metal part of

chassis body with a screw.

Grounding Cable

Battery

Battery Power Cable

* When the subwoofer is connected to the

center speaker output jack, it becomes

subwoofer output (L or R).

In this case, change the setting of the

center speaker to subwoofer in “Setting

the speakers” (page 4).

Center Output or Subwoofer Output (L)*

Subwoofer Output or Subwoofer Output (R)*

Rear Output (L)

Rear Output (R)

To External

Amplifier

Front 2 Output (L)

Front 2 Output (R)

Front 1 Output (L)

Front 1 Output (R)

NOTE

Also refer to the operating instructions of the KCE-900E. For

details, contact your store of purchase or an Alpine Information

Center.

NOTES

When connecting a Optical Digital CD

Changer

Please observe the following when using Fiber Optic

Cable.

## When connecting a Optical

Digital CD Changer, change

the Digital/Analog switch of

the CD Changer to “2”

• Do not coil the Fiber Optic Cable smaller than a 30mm radius.

• Do not place anything on top of the Fiber Optic Cable.

(Digital Output)

40-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Information

Dolby Pro Logic II

Terminology

Dolby Pro Logic II provides multichannel surround

sound from any 2 channel source. It reproduces

extended bandwidth playback with 5.1 channels.

This is made possible by an advanced matrix

surround decoder. This new decoder is able to draw

out spatial characteristics of the recording without

adding tonal coloration or artificial delays that did not

exist in the original.

Dolby Digital

Dolby Digital is a digital audio compression

technology developed by Dolby Laboratories that

allows large quantities of audio data to be efficiently

recorded on discs. It is compatible with audio signals

from mono (1 channel) all the way up to 5.1-channel

surround sound. The signals for the different

channels are completely independent, and since the

sound is high quality digital there is no loss of sound

quality.

Linear PCM audio (LPCM)

LPCM is a signal recording format used for music

CDs. Whereas music CDs are recorded at 44.1 kHz/

16 bits, DVDs are recorded at 48 kHz/16 bits to 96

kHz/24 bits, thereby achieving higher sound quality

than music CDs.

Center

speaker

Front

speakers

Rear

speakers

Subwoofer

Speaker layout for enjoying

Dolby Digital sound/DTS sound

DTS

This is a home-use digital sound format of the DTS

Sound System. This is a high quality sound system,

developed by Digital Theater Systems Corp for use

in movie theaters.

DTS has six independent sound tracks. The theater

presentation is fully realized in the home and other

settings. DTS is the abbreviation for Digital Theater

Systems.

41-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Others

Caution when connecting the DVA-5205/

DVA-5200/DHA-S680

In case of difficulty

Although the adjustment screen such as EQ and

TCR on the audio processor are available in DVA-

5205/DVA-5200/DHA-S680, these adjustments

cannot be made when they are connected to the

PXA-H701.

If you encounter a problem, please review the items

in the following checklist. This guide will help you

isolate the problem if the unit is at fault. Otherwise,

make sure the rest of your system is properly

connected or consult your authorized Alpine dealer.

Set does not operate.

Nothing appears on the display.

•

Vehicle’s ignition key is turned off.

- Turn the vehicle’s ignition key on.

Set’s power is not turned on.

•

- Turn the vehicle’s ignition key on then turn on

the power of the head unit.

•

Power cord is not securely connected.

- Connect the power cord securely.

Fuse is blown.

- Replace with a fuse of the specified capacity.

Display mode is set to off.

- Switch the display to another mode.

(Page 29)

Power is on but no sound is produced.

•

Volume level is set to the minimum.

- Increase the volume level. (Page 5)

Input mode is set to a mode to which nothing is

connected.

•

- Set to a connected mode. (Page 5)

No sound is produced from the speakers.

•

Cords are not securely connected.

- Connect the cords securely.

Speaker is set to the off mode.

- Set the speaker to the on mode. (Pages 4

and 22)

•

Speaker setup settings cannot be made.

•

Front speakers are set to “SMALL”.

- Set the front speakers to “LARGE”. (Page 22)

Sound cannot be adjusted.

•

Defeat is set to the on mode.

- Set defeat to the off mode. (Page 28)

42-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts name

Specifications

Quantity

Graphic EQ number of bands:

Front (left and right)

Rear (left and right)

Center

31 bands

10 bands

Parts for mounting ................................ 1set

Owner’s manual.................................... 1set

Subwoofer

Graphic EQ boost cut

range:

Due to continuous product improvement,

specifications and design are subject to change

without notice.

The illustrations included in these instructions may

appear different from the actual product due to

printing conditions.

9 dB

Parametric EQ number of bands:

Front/rear/center 5 bands

Subwoofer 2 bands

Parametric EQ frequency:

Front, Rear and Center

Band 1:

Band 2:

Band 3:

Band 4:

Band 5:

20/22/25/28/31.5/36/40/45/50/56/

63/71/80/90/100/110/125/140/160/

180/200/220/250/280/315/360/400/

450/500 (Hz)

50/56/63/71/80/90/100/110/125/

140/160/180/200/220/250/280/315/

360/400/450/500/560/630/710/800/

900/1k/1.1k/1.2k (Hz)

125/140/160/180/200/220/250/280/

315/360/400/450/500/560/630/710/

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k (Hz)

315/360/400/450/500/560/630/710/

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/

4.5k/5k/5.6k/6.3k/7.1k/8k (Hz)

800/900/1k/1.1k/1.2k/1.4k/1.6k/

1.8k/2k/2.2k/2.5k/2.8k/3.2k/3.6k/4k/

4.5k/5k/5.6k/6.3k/7.1k/8k/9k/10k/

11k/12.5k/14k/16k/18k/20k (Hz)

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

“DTS” and “DTS Digital Surround” are registered

trademarks of Digital Theater Systems, Inc.

Subwoofer

Band 1:

20/22/25/28/31.5/36/40/45/50/56/

63/71/80 (Hz)

50/56/63/71/80/90/100/110/125/

140/160/180/200 (Hz)

Band 2:

Parametric EQ boost cut

range:

9 dB

Time correction control

range:

0 to 20 ms (0.05 ms steps)

Frequency response: 10 Hz to 24 kHz

S/N ratio:

100 dB (IHF-A)

Channel separation:

Input sensitivity:

80 dB

850 mV (2V for analog 1 only)

Subwoofer crossover: 20 to 200 Hz (1/6 oct. steps)

Rated output:

Input impedance:

Output impedance:

Weight:

4V (with 10 k ohms load)

10 k ohms or greater

1 k ohm or less

Control unit (sold separately)

159 g (5 oz)

Base unit

1.1 kg (2 lbs. 6 oz)

Dimensions

Control unit (sold separately)

Width

Height

Depth

170 mm (6-3/4")

46 mm (1-13/16")

24 mm (15/16")

Base unit

Width

Height

Depth

260 mm (10-3/16")

40 mm (1-9/16")

160 mm (6-1/4")

43-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

GARANTIE LIMITÉE

Fidèles à leur engagement de ne fournir que des produits de qualité, ALPINE ELECTRONIQUE DE L'AMERIQUE INC. et

ALPINE ELECTRONIQUE DU CANADA INC. (Alpine) sont heureuses de vous offrir cette garantie. Nous vous suggérons de le

lire attentivement et en entier. Si vous avez la moindre question, veuillez contacter l'un de nos concessionnaires ou appeler

directement Alpine au numéros Liste ci-dessous.

Vous devez donner une description détaillée des

problèmes qui sont à l'origine de votre demande de

réparation.

Vous devez joindre la preuve de votre achat du produit.

Vous devez emballer soigneusement le produit pour éviter

tout dommage durant son transport.

G PRODUITS COUVERT PAR LA GARANTIE

Cette garantie couvre les produits audio/visuel de voiture et

les accessoires connexes ("le produit"). Elle ne couvre les

produits que dans le pays où il ont été achetés.

G DURÉE DE LA GARANTIE

Cette garantie est en vigueur pendant un an à partir de la date

du premier achat du client.

G LIMITATION DES GARANTIES TACITES

LA DURÉE DE TOUTES LES GARANTIES TACITES, Y

COMPRIS LA GARANTIE D'ADAPTATION A L'UTILISATION

ET LA GARANTIE DE QUALITÉ LOYALE ET MARCHANDE,

EST LIMITÉE À CELLE DE LA GARANTIE EXPRESSE

DÉTERMINÉE CI-DESSUS. PERSONNE N'EST AUTORISÉ

À ENGAGER AUTREMENT LA RESPONSABILITÉ D'ALPINE

EN VERTU DE LA VENTE D'UN PRODUIT.

G GARANTIE À VIE DES TÊTES DE LECTURE DES

MAGNÉTOPHONES À CASSETTES

Toutes les têtes de cassettes analogiques audio de voiture

Alpine, à l’exception des êtes de cassettes vidéo sont

garanties à vie contre des vices de fabrication pouvant

entraîner leur panne.

G PERSONNES PROTÉGÉES PAR LA GARANTIE

Seul l'acheteur original du produit, s'il résisde aux États-Unis,

à Porto Rico ou au Canada, peut se prévaloir de la garantie.

G EXCLUSIONS DE LA GARANTIE

ALPINE STIPULE EXPRESSÉMENT QU'ELLE N'EST PAS

RESPONSABLE DES DOMMAGES DOMMAGES-INTÉRÊTS

ET DOMMAGES INDIRECTS PROVOQUÉS PAR LE

PRODUIT. LES DOMMAGES DOMMAGES-INTÉRÊTS

SONT LES FRAIS DE TRANSPORT DU PRODUIT VERS UN

CENTRE DE SERVICE ALPINE, LA PERTE DE TEMPS DE

L'ACHETEUR ORIGINAL, LA PERTE D'UTILISATION DU

PRODUIT, LES BILLETS D'AUTOBUS, LA LOCATION DE

VOITURES ET TOUS LES AUTRES FRAIS LIÉS À LA

GARDE DU PRODUIT.

G CE QUI EST COUVERT

Cette garantie couvre tous les défauts de matériaux et de

fabrication (pièces et main d'œuvre) du produit.

G CE QUI N'EST PAS COUVERT

Cette garantie ne couvre pas ce qui suit:

Les dommages survenus durant le transport des produits

renvoyés à Alpine pour être réparés (les réclamations

doivent être adressées au transporteur);

LES DOMMAGES INDIRECTS SONT LES FRAIS DE

RÉPARATION OU DE REMPLACEMENT D'AUTRES BIENS

ENDOMMAGÉS SUITE AU MAUVAIS FONCTIONNEMENT

DU PRODUIT.

LES RECOURS PRÉVUS PAR LES PRÉSENTES

EXCLUENT ET REMPLACENT TOUTE AUTRE FORME DE

RECOURS.

Tout dégât provoqué par accident, abus, négligence,

usage inapproprié, mauvais raccordement, mauvaise

utilisation ou par le non-respect des instructions

indiquées dans le manuel de l’utilisateur.

Les dommages dus à la force majeure, notamment aux

tremblements de terre, au feu, aux inondations, aux

tempêtes ou aux autres cataclysmes naturels;

Les frais ou les dépenses relatifs à l'enlèvement ou à la

réinstallation du produit;

Les services rendus par une personne, physique ou

morale non autorisée;

Les produits dont le numéro de série a été effacé, modifié

ou retiré;

Les produits qui ont été adaptés ou modifiés sans le

consentement d'Alpine;

Les produits qui ne sont pas distribués par Alpine aux

Etats-Unis, à Porto Rico ou au Canada;

Les produits qui n'ont pas été achetés par l'entremise d'un

concessionnaire Alpine autorisé;

Tout produit qui a été déterminé comme contenant une

quantité excessive de poussière ou de saleté et tout

produit qui contient d’autres saleté, en ce compris du

liquide et des corps étrangers.

G LIEN ENTRE LA GARANTIE ET LA LOI

La garantie vous donne des droits spécifiques, mais vous

pouvez aussi jouir d'autres droits, qui varient d'un état ou

d'une province à l'autre. En outre, certains états et certaines

provinces interdisent de limiter la durée des garanties tacites

ou d'exclure les dommages accessoires ou indirects. Dans ce

cas, les limites et les exclusions de la garantie peuvent ne pas

s'appliquer à vous.

G CLAUSE APPLICABLE AU CANADA SEULEMENT

Pour que la garantie soit valable, il faut qu'un centre

d'installation autorisé ait installé le système audio pour l'auto

dans votre véhicule et qu'il ait ensuite apposé son cachet sur

la garantie.

G NUMÉROS D'APPEL DU SERVICE À LA CLIENTELE

Si vous avez besoin de nos services, veuillez appeler le

centre de service autorisé Alpine le plus proche.

G COMMENT SE PRÉVALOIR DE LA GARANTIE

Il vous faut remettre le produit nécessitant des réparations

à un centre de service autorisé Alpine ou à Alpine même et

en assumer les frais de transport. Alpine a le choix entre

réparer le produit ou le remplacer par un produit neuf ou

révisé, le tout sans frais pour vous. Si les réparations sont

couvertes par la garantie et si le produit a été envoyé à un

centre de service Alpine ou à Alpine, le paiement des frais

de réexpédition du produit incombe Alpine.

U.S.A.

CANADA

1-800-ALPINE-1 (1-800-257-4631)

Alpine Électronique de L'Amérique, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Électronique du Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. ("Alpine"), are dedicated to quality

craftsmanship and are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any

questions, please contact your Dealer or Alpine at one of the telephone numbers listed below.

You should provide a detailed description of the

G PRODUCTS COVERED:

problem(s) for which service is required.

You must supply proof of your purchase of the product.

You must package the product securely to avoid

damage during shipment.

This Warranty covers Car Audio/Visual Products and

Related Accessories ("the product"). Products purchased in

the Canada are covered only in the Canada. Products

purchased in the U.S.A. are covered only in the U.S.A.

G HOW WE LIMIT IMPLIED WARRANTIES:

ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR

USE AND MERCHANTABILITY ARE LIMITED IN

DURATION TO THE PERIOD OF THE EXPRESS

WARRANTY SET FORTH ABOVE AND NO PERSON IS

AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE OF THE

PRODUCT.

G LENGTH OF WARRANTY:

This Warranty is in effect for one year from the date of the

first consumer purchase.

G LIFETIME TAPE HEAD WARRANTY:

All Alpine Car Audio analog tape heads excluding Video

tape heads are warranted for life against manufacturing

defects causing failure.

G WHO IS COVERED:

G HOW WE EXCLUDE CERTAIN DAMAGES:

ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR

INCIDENTAL AND CONSEQUENTIAL DAMAGES

CAUSED BY THE PRODUCT. THE TERM "INCIDENTAL

DAMAGES" REFERS TO EXPENSES OF

This Warranty only covers the original purchaser of the

product, who must reside in the United States, Puerto Rico

or Canada.

G WHAT IS COVERED:

This Warranty covers defects in materials or workmanship

(parts and labor) in the product.

TRANSPORTING THE PRODUCT TO THE ALPINE

SERVICE CENTER, LOSS OF THE ORIGINAL

PURCHASER'S TIME, LOSS OF THE USE OF THE

PRODUCT, BUS FARES, CAR RENTALS OR OTHERS

COSTS RELATING TO THE CARE AND CUSTODY OF

THE PRODUCT. THE TERM "CONSEQUENTIAL

DAMAGES" REFERS TO THE COST OF REPAIRING OR

REPLACING OTHER PROPERTY WHICH IS DAMAGED

WHEN THIS PRODUCT DOES NOT WORK PROPERLY.

THE REMEDIES PROVIDED UNDER THIS WARRANTY

ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.

G WHAT IS NOT COVERED:

This Warranty does not cover the following:

Damage occurring during shipment of the product to

Alpine for repair (claims must be presented to the

carrier).

Damage caused by accident, abuse, negligence,

misuse, improper connections, improper operation or

failure to follow instructions contained in the Owner's

manual.

G HOW STATE/PROVINCIAL LAW RELATES TO THE

WARRANTY:

Damage caused by act of God, including without

limitation, earthquake, fire, flood, storms or other acts of

nature.

This Warranty gives you specific legal rights, and you may

also have other rights which vary form state to state and

province to province. In addition, some states/provinces do

not allow limitations on how long an implied warranty lasts,

and some do not allow the exclusion or limitation of

incidental or consequential damages. Accordingly,

limitations as to these matters contained herein may not

apply to you.

Any cost or expense related to the removal or

reinstallation of the product.

Service performed by an unauthorized person, company

or association.

Any product which has the serial number defaced,

altered or removed.

Any product which has been adjusted, altered or

modified without Alpine's consent.

Any product not distributed by Alpine within the United

States, Puerto Rico or Canada.

Any product not purchased from an Authorized Alpine

Dealer.

Any product that has been determined to contain an

excessive amount of dust or dirt and any product that

contains other contaminants including liquid or foreign

objects.

G IN CANADA ONLY:

This Warranty is not valid unless your Alpine car audio

product has been installed in your vehicle by an Authorized

Installation Center, and this warranty stamped upon

installation by the installation center.

G HOW TO CONTACT CUSTOMER SERVICE:

Should the product require service, please call the following

number for your nearest Authorized Alpine Service Center.

G HOW TO OBTAIN WARRANTY SERVICE:

U.S.A.

CANADA

1-800-ALPINE-1 (1-800-257-4631)

You are responsible for delivery of the product to an

Authorized Alpine Service Center or Alpine for repair

and for payment of any initial shipping charges. Alpine

will, at its option, repair or replace the product with a

new or reconditioned product without charge. If the

repairs are covered by the warranty, and if the product

was shipped to an Authorized Alpine Service Center or

Alpine, Alpine will pay the return shipping charges.

Alpine Electronics of America, Inc., 19145 Gramercy Place, Torrance, California 90501, U.S.A.

Alpine Electronics of Canada, Inc., Suite 203, 7300 Warden Ave. Markham, Ontario, L3R 9Z6, Canada

Download from Www.Somanuals.com. All Manuals Search And Download.

Agilent Technologies Switch E2050 90003 User Manual
Airlink101 Security Camera AICN1500W User Manual
Aiwa CD Player CX NA71 User Manual
Altec Lansing Portable Speaker 401C User Manual
Altec Lansing Portable Speaker 9864A User Manual
Atlantis Land Switch A07 ES4625 User Manual
Axis Communications Security Camera AXIS 209FD User Manual
Banner Stereo Amplifier PL3 M User Manual
Barco Projection Television RHDM 1701 User Manual
Behringer Musical Instrument Amplifier V TONE GM110 User Manual