Alpine Car Stereo System DVI 9990 User Manual

R
DVI-9990  
DVD-Audio/Video Tuner  
Guide for Installation and Connections  
Guide d’installation et de connexions  
Guía de instalación y conexiones  
English  
Français  
Español  
Español  
Italiano  
Svenska  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
GUIDE FOR INSTALLATION AND CONNECTIONS  
• Please read this GUIDE FOR INSTALLATION AND CONNECTIONS and the OWNER’S  
MANUAL thoroughly to familiarize yourself with each control and function. We at ALPINE hope  
that your new DVI-9990 will give you many years of listening enjoyment.  
In case of problems when installing your unit, please contact your authorized ALPINE dealer.  
Points to Observe for Safe Usage  
• Read this manual carefully before starting operation and use this system safely. We cannot be  
responsible for problems resulting from failure to observe the instructions in this manual.  
• This manual uses various pictorial displays to show how to use this product safely and to avoid  
harm to yourself and others and damage to your property.  
Here is what these pictorial displays mean. Understanding them is important for reading this  
manual.  
• Meaning of displays  
This symbol means important instructions. Failure to heed them can  
result in serious injury or death.  
Warning  
This symbol means important instructions. Failure to heed them can  
result in injury or property damage.  
Caution  
Warning  
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.  
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may  
result in fire or electric shock.  
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in  
fire or product damage.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are  
not sure.) Failure to do so may result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due to electrical shorts.  
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange  
wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or  
wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals,  
etc. can be extremely hazardous.  
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply  
power to other equipment. Doing so will exceed the current carrying capacity of the wire and  
result in fire or electric shock.  
2-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the  
chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel  
lines, tanks or electrical wiring. Failure to take such precautions may result in fire.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE  
GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other  
safety-related system), or tanks should NEVER be used for installations or ground connections.  
Using such parts could disable control of the vehicle and cause fire etc.  
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside  
and may result in fire.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swal-  
lowing them may result in serious injury. If swallowed, consult a physician immediately.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS  
THE STEERING WHEEL OR GEARSHIFT. Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of  
this unit requires special technical skill and experience. To ensure safety, always contact the  
dealer where you purchased this product to have the work done.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only  
the specified accessory parts. Use of other than designated parts may damage this unit internally  
or may not securely install the unit in place. This may cause parts to become loose resulting in  
hazards or product failure.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.  
Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed  
edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in  
metal, use a rubber grommet to prevent the wires insulation from being cut by the metal edge of  
the hole.  
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit  
in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit  
may result in product failure.  
Precautions  
Be sure to disconnect the cable from the () battery post before installing your DVI-9990. This  
will reduce any chance of damage to the unit in case of a short-circuit.  
Be sure to connect the color coded leads according to the diagram. Incorrect connections may  
cause the unit to malfunction or damage to the vehicles electrical system.  
When making connections to the vehicles electrical system, be aware of the factory installed  
components (e.g. on-board computer). Do not tap into these leads to provide power for this  
unit. When connecting the DVI-9990 to the fuse box, make sure the fuse for the intended circuit  
of the DVI-9990 has the appropriate amperage. Failure to do so may result in damage to the  
unit and/or the vehicle. When in doubt, consult your ALPINE dealer.  
The DVI-9990 uses female RCA-type jacks for connection to other units (e.g. amplifier) having  
RCA connectors.You may need an adaptor to connect other units. If so, please contact your  
authorized ALPINE dealer for assistance.  
3-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
PRECAUTIONS  
Accessories  
Installation  
2
5
6
Connections  
9
Connections with other equipments  
10  
To use this unit, a Multimedia Manager (PXI-H990, sold separately) or DAC unit (DAI-C990,  
sold separately) is required. This unit is powered by connecting with the PXI-H990 or DAI-  
C990.  
IMPORTANT  
Please record the serial number of your unit in the space provided below and keep it as a perma-  
nent record. The serial number plate is located on the bottom of the unit.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10 cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if  
necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible.  
Your Alpine dealer carries various noise suppressors. Contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for  
further information.  
4-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
Power cable  
RCA Extension  
cable (video)  
S video cable  
Flat screw  
(M5 x 6)  
Front frame  
x 4  
Parts for remote control  
Remote control  
Battery (AAA)  
Reinforcement screw Remote control holder  
(M3 x 12)  
x 2  
Double-sided  
adhesive tape  
5-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation Location  
Before deciding on the mounting location, check that opening and closing the display will not  
hamper gear shifting in that position.  
Install at an angle of within 35 degrees from the horizontal.  
1
Mounting Sleeve (Included)  
Dashboard  
DVI-9990  
Remove the Detachable Front Panel (refer to page 9 of Owners Manual). Remove the front  
frame from main unit (see Removalon page 7).  
Slide the mounting sleeve into the dashboard.  
2
Hex Nut (M5)  
Screw  
##  
Bolt Stud  
Metal Mounting  
Strap  
#
Ground Lead  
DVI-9990  
Chassis  
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of  
the unit to a clean metal spot using a screw (#) already attached to the vehicles chassis.  
NOTE  
For the screw marked ##, use an appropriate screw for the chosen mounting location.  
Connect each input lead coming from the product you are connecting with to the correspond-  
ing output lead coming from the left rear of the DVI-9990. Connect all other leads of the DVI-  
9990 according to details described in the Connectionssection.  
6-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Slide the DVI-9990 into the dashboard. When the unit is in place, make sure the locking pins  
are fully seated in the down position. This can be done by pressing firmly in on the unit while  
pushing the locking pin down with a small screwdriver. This ensures that the unit is properly  
locked and will not accidentally come out from the dashboard. Install the Detachable Front  
Panel.  
Lock Pin  
Removal  
1 Remove the DETACHABLE FRONT PANEL.  
2 Use a small screwdriver (or similar tool) to push the locking pins to the upposition (see above  
drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock  
before unlocking the second pin.  
3 Pull the unit out, keeping it unlocked as you do so.  
< JAPANESE CAR >  
Front Frame  
DVI-9990  
Screws (M5 x 6)  
(Included)  
Ground Lead  
#
Mounting Bracket  
NOTE  
Secure the ground lead of the unit to a clean metal spot using a screw (#) already attached to the vehicle's chassis.  
7-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting the remote control holder  
If the remote control is in direct sunlight, remove it from the holder and keep it in the glove box.  
When the holder cannot be mounted securely with Velcro tape, mount it by using screws.  
Reinforcement Screws  
Remote Control  
Remote Control  
Holder  
Protective paper  
Console Box etc.  
8-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Basic Connection  
Cable Color  
Cable Specifications  
Video output connector  
Outputs a video signal.  
Yellow  
Connects to the video input of the TV monitor you are linking with.  
There is a copy protect signal included in the video output signal, so that recording  
with a VCR (Video Cassette Recorder) etc., is not possible.  
Also, depending on the monitor, the picture may not be displayed correctly.  
IONBUS terminal  
Connects with IONBUS compatible products.  
S video output terminal  
Outputs a video signal.  
Connects with ALPINE products with a S video input terminal.  
DVD Audio Link terminal  
Connects with the DVD Audio Link terminal of the PXI-H990 Multimedia Manager or  
DAI-C990 DAC unit.  
(Connect when using a DVD audio disc. Remove the terminal cover and plug in the  
DVD Audio Link cable).  
Antenna Receptacle  
Power Antenna Lead  
Connect this lead to the +B terminal of your power antenna, if applicable.  
Blue  
Illumination Lead  
Orange  
Black  
Red  
This lead may be connected to the vehicles instrument cluster illumination lead.  
This will allow the backlighting of the DVI-9990 to dim whenever the vehicles  
lights are turned on.  
Ground Lead  
Connect this lead to a good chassis ground on the vehicle. Make sure the  
connection is made to bare metal and is securely fastened using the sheet metal  
screw provided.  
Power supply unit  
Switched Power Lead (Ignition)  
Connect this lead to an open terminal on the vehicles fuse box or another unused  
power source which provides (+)12V only when the ignition is turned on or in the  
accessory position.  
Battery Lead  
Yellow  
Connect this lead to the positive (+) post of the vehicles battery.  
Fuse  
(7.5A)  
NOTES  
Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air  
conditioner. This may cause a malfunction.  
Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.  
The power supply unit temperature can become hot. This is not a malfunction.  
9-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections with other equipments  
System Connection <Example 1>  
Connectable system products  
IONBUS compatible monitor  
Multimedia Manager or DAC unit  
Ai-NET/IONBUS converter  
Ai-NET compatible changer  
XM Radio Receiver  
TMI-M990  
PXI-H990 or DAI-C990  
KCI-500B  
CHA-S634 or CHA-1214  
TUA-T021XM or TUA-T020XM  
System switch  
1 (SYSTEM)”  
selected  
IONBUS  
compatible  
monitor  
(TMI-M990)  
(sold separately)  
DVD Audio Link cable  
(Included with the PXI-H990 or DAI-C990)  
To DVD Audio Link  
terminal  
*
System switch (PXI-H990 only)  
Multimedia Manager  
PXI-H990  
Set to SINGLE when  
connecting one PXI-H990.  
To  
or  
IONBUS terminal  
DAC unit  
When connecting two PXI-  
H990s, set the first to FRONT,  
and the second to REAR.  
IONBUS  
compatible  
monitor box  
*
*
DAI-C990  
(sold separately)  
IONBUS cable  
(Included with  
the TMI-M990)  
To  
IONBUS  
terminal  
To IONBUS  
terminal  
When connecting the changer or  
XM Radio Receiver, you must  
use an Ai-NET/IONBUS converter  
(KCI-500B).  
*
*
IONBUS cable  
(Included with the KCI-500B)  
To  
CD changer  
(Ai-NET)  
or  
IONBUS  
To Ai-NET  
connector  
terminal  
XM Radio  
Receiver  
(sold  
Ai-NET/IONBUS  
converter  
separately)  
(KCI-500B)  
(sold separately)  
Ai-NET cable  
(Included with CD changer or XM Radio Receiver)  
*
Antenna Receptacle  
To antenna plug of the vehicle  
To power antenna  
Blue  
POWER  
ILLUMINATION  
GND  
Orange  
Black  
To the instrument cluster illumination lead  
<DVI-9990>  
Connect to a metal part of chassis body with a screw.  
IGNITION  
BATTERY  
Red  
Ignition Key  
Yellow  
Power supply unit  
Fuse (7.5A)  
Battery  
NOTES  
Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air  
conditioner. This may cause a malfunction.  
Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.  
The power supply unit temperature can become hot. This is not a malfunction.  
*
For the Ferrite Core, refer to the Owners Manual of the product that the IONBUS cable is attached to.  
10-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connection <Example 2>  
Connectable system products  
Multimedia Manager or DAC unit  
External TV monitor  
PXI-H990 or DAI-C990  
IONBUS incompatible  
TV monitor  
RCA Extension cable (video)  
(Included)  
Video output connector  
External TV  
monitor  
(sold separately)  
Yellow  
To DVD Audio Link  
terminal  
DVD Audio Link cable  
(Included with the PXI-H990 or DAI-C990)  
System switch  
Set to SINGLE when  
connecting one PXI-H990.  
Multimedia Manager  
PXI-H990  
or  
IONBUS cable  
(Included with the PXI-H990 or DAI-C990)  
DAC unit  
When connecting two PXI-  
H990s, set the first to FRONT,  
and the second to REAR.  
DAI-C990  
(sold separately)  
*
To IONBUS  
terminal  
*
Antenna Receptacle  
To antenna plug of the vehicle  
Blue  
POWER  
To power antenna  
ILLUMINATION  
GND  
Orange  
Black  
Red  
To the instrument cluster illumination lead  
Connect to a metal part of chassis body with a screw.  
IGNITION  
BATTERY  
Ignition Key  
Yellow  
Power supply unit  
Fuse (7.5A)  
Battery  
NOTES  
Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air  
conditioner. This may cause a malfunction.  
Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.  
The power supply unit temperature can become hot. This is not a malfunction.  
*
For the Ferrite Core, refer to the Owners Manual of the product that the IONBUS cable is attached to.  
11-EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Network Router 59039 2 User Manual
ADTRAN Network Card T200 HDSL4 User Manual
AG Neovo Computer Monitor SX 17 User Manual
Akai Flat Panel Television ALD1570 User Manual
Amana Range Electronic Range User Manual
Amcor Electric Heater AMH9 User Manual
American Standard Indoor Furnishings 0293004 User Manual
Atlona Car Amplifier AT 3GSDI 14 User Manual
Ayre Acoustics Stereo Amplifier AX 7E User Manual
Bang Olufsen Microphone 711 User Manual