R
EN
FR
ES
CVA-1003
Mobile Multimedia Station
• OWNER'S MANUAL
Please read before using this equipment.
• MODE D'EMPLOI
Veuillez lire avant d'utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS, INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue De La Belle Etoile, Z.I. Paris Nord Il
B.P. 50016 F-95945, Roissy, Charles De Gaulle
Cedex, France
Tokyo 141-8501, Japan
Tel.: (03) 3494-1101
Tel.: (03) 9769-0000
ALPINE ELECTRONICS GmbH
Kreuzerkamp 7-11 40878 Ratingen, Germany
Tel.: 02102-45 50
Tel.: 01-48 63 89 89
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes
MK14 5BU, U.K.
ALPINE ITALIA S.p.A.
Via C. Colombo 8, 20090 Trezzano Sul Naviglio
MI, Italy
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Tel.: 01908-61 15 56
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel.: 02-48 47 81
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal De Gamarra 36, Pabellón 32
01013 Vitoria (Alava)-Apdo. 133, Spain
Tel.: 34-45-283588
Tel.: 1-800-ALPINE-1 (1-800-257-4631)
Yamagata Printing Co., Ltd.
2-6-34, Takashima, Nishi-ku,
Yokohama, Kanagawa, Japan
Designed by ALPINE Japan
Printed in Japan (Y)
68P41262Y35-O
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
Contents
Operating Instructions
CD Player/Changer Operation
(Optional)
Playing Optional CD player or Changer ......... 15
Music Sensor (Skip)........................................ 15
Fast Forward and Backward ........................... 16
Repeat Play ..................................................... 16
M.I.X. (Random Play) .................................... 16
Scanning Programs ......................................... 17
Titling Discs .................................................... 17
Erasing Disc Title............................................ 18
Controlling CD Changer ................................. 18
Multi-Changer Selection ................................. 19
MD Player Operation (Optional)
Playing Mini-Disc (MD)................................. 20
Music Sensor (Skip)........................................ 20
Fast Forward and Backward ........................... 21
Repeat Play ..................................................... 21
M.I.X. (Random Play) .................................... 21
Cassette Player Operation (Optional)
Controlling Cassette Player ............................ 22
DVD/Video CD/CD Player Operation
(Optional)
WARNING
WARNING..................................................3
CAUTION ...................................................3
PRECAUTIONS .........................................4
Basic Operation
Detaching the Front Panel................................. 6
Attaching the Front Panel ................................. 6
Initial System Start-Up ..................................... 6
Turning Power On and Off ............................... 7
Raising the Monitor .......................................... 7
Lowering the Monitor ....................................... 8
Selecting the Monitor's Opening Position ........ 8
Adjusting the Monitor Viewing Angle .............. 8
Adjusting Volume/Balance (Between Left and
Right)/Fader (Between Front and Rear) ........ 9
Turning Loudness On and Off .......................... 9
Audio Mute Function ........................................ 9
Radio Operation
Manual Tuning ................................................ 10
Automatic Seek Tuning .................................. 10
Manual Storing of Station Presets .................. 11
Automatic Memory of Station Presets ............ 11
Tuning to Preset Stations ................................ 11
XM Radio Operation (Optional)
Receiving the XM Channels with the XM
Playing DVD/Video CD/CD ........................... 23
Still/Pause ....................................................... 23
Chapter (DVD)/Track (Video CD) Sensor ...... 23
Fast Forward/Backward .................................. 24
Repeat Play ..................................................... 24
Controlling DVD Changer .............................. 24
Navigation System Operation
(Optional)
Receiver (Optional) ..................................... 12
Checking the XM Radio ID Number .............. 13
Storing of XM Channel Presets ...................... 13
Receiving the Stored XM Channels................ 13
Category Search .............................................. 14
Changing the Display...................................... 14
Turning on the Navigation Mode .................... 25
1
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Installation and
Connections
Displaying the Title/Text................................. 26
Setting the Bass Control ................................. 28
Setting the Treble Control ............................... 29
Switching Phase .............................................. 30
Turning Defeat Mode On and Off................... 30
Illumination control ........................................ 31
Adjusting Brightness of Picture ...................... 31
Adjusting Color of Picture .............................. 32
Adjusting Tint of Picture................................. 32
Switching the Background Screen .................. 33
CD Text/MD Title Scroll Setting .................... 33
Setting Automatic Opening/Closing of
Warning ........................................................... 45
Caution ............................................................ 45
Precautions ...................................................... 45
Installation ...................................................... 46
Connections .................................................... 48
LIMITED WARRANTY
Monitor ........................................................ 34
Turning Sound Guide function On or Off ....... 34
Setting the Clock Display ............................... 35
Displaying Time.............................................. 35
Setting Time .................................................... 35
Selecting Rear Monitor ................................... 36
Setting the External Input ............................... 37
Adjusting Source Signal Levels ...................... 37
Switching the Tuner Mode.............................. 37
Subwoofer Control On and Off....................... 38
Interrupt Feature (MIX LEVEL) .................... 38
Setting the External Expansion Box ............... 39
Switching Disc Mode...................................... 39
Recalling Stored Settings ................................ 39
Simultaneous Operation.................................. 39
Switching Display Modes ............................... 40
Operation with the Monitor Display Closed.....41
Information
In Case of Difficulty ....................................... 42
Specifications .................................................. 44
2-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result
in fire.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
DO NOT PLACE HANDS, FINGERS OR FOREIGN
OBJECTS IN INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the
product.
INSTALL THE PRODUCT CORRECTLY SO THAT THE
DRIVER CANNOT WATCH TV/VIDEO UNLESS THE
VEHICLE IS STOPPED AND THE EMERGENCY BRAKE
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
IS APPLIED.
It is dangerous (and illegal in many states) for the driver to
watch TV/Video while driving a vehicle. Installing this
product incorrectly enables the driver to watch TV/Video
while driving. This may cause a distraction, preventing the
driver from looking ahead, thus causing an accident. The
driver or other people could be severely injured.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking
ahead of the vehicle and cause an accident.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Center for repairing.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN
STILL HEAR OUTSIDE NOISE WHILE DRIVING.
Failure to do so may result in an accident.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking
ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V
APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
3
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
PRECAUTIONS
Temperature
Operation of some of the functions of this unit is very
complex. Because of this, it was deemed necessary to
place these functions into a special screen. This will
restrict operation of these functions to times when the
vehicle is parked. This ensures the focus of the driver's
attention will be on the road and not on the CVA-1003.
This has been done for the safety of the driver and
passengers.
The Title Input and SETUP screens cannot be made while
the car is moving. The car must be parked and the parking
brake must be engaged for the procedure described in the
Owner's Manual to be valid. The warning "CAN'T
OPERATE WHILE DRIVING," will be displayed if any
attempts are made to perform these operations while
driving.
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and 0°C (+32°F) before turning your unit
on.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Installation Location
Make sure the CVA-1003 will not be installed in a
location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
This operation is the same as when selecting sources
using the remote control (Optional). When the car is
parked, the selection is made as described in the Owner's
Manual.
Excessive vibrations
Handling the Detachable Front Panel
•
Do not expose to rain or water.
•
Do not drop or apply shock.
Alpine products equipped with the Ai-NET bus,
connected to the CVA-1003, can be operated from the
CVA-1003. Depending on the products connected, the
functions and displays will vary. For details, consult your
Alpine dealer.
4-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
You can operate most of the functions of this unit with the monitor display
open or closed (except some operations). For operations with the monitor
display closed, refer to page 41.
THE MONITOR DISPLAY IS OPEN
displayed in
the monitor
display
THE MONITOR DISPLAY IS CLOSED
displayed in the sub display
5
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
OPEN/CLOSE
PWR
Detaching the Front Panel
• Compatibility with Factory Steering Wheel
Radio Controls
1
2
3
Press and hold the PWR (Power) button for more
than 2 seconds to turn off the power.
If your vehicle has steering wheel controls for
the radio, an optional steering wheel control
interface may be available to connect your
Alpine radio. For details, contact your Alpine
dealer.
• Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine
dealer.
Press the
(Release) button at lower left side
until the front panel pops out.
Grasp the left side of the front panel and pull it out.
Point the optional remote control transmitter at
the remote control sensor.
NOTES
• The front panel may become hot in normal usage
(especially the connector terminals), this is not a
malfunction.
Remote control
sensor
Remote control
sensor
• To protect the front panel, place it in the supplied
carrying case.
When the monitor
display is open.
When the monitor
display is closed.
• You can use the remote control even when the
monitor display is closed.
Attaching the Front Panel
1
First, insert the right side of the front panel into
the main unit. Align the groove on the front panel
with the projections on the main unit.
Initial System Start-Up
2
Push the left side of the front panel until it locks
firmly into the main unit.
Immediately after installing or applying power to the
unit, it should be initialized. To do this, first, remove
the detachable front panel. Behind the front panel, to
the right of the connector, there is a small hole.
Using a pencil or other pointed object, press the
reset switch mounted behind this hole to complete
the initialization procedure.
2
1
NOTE
Before attaching the front panel, make sure that there is
no dirt or dust on the connector terminals and no foreign
object between the front panel and the main unit.
RESET switch
6-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning Power On and Off
Raising the Monitor
1
Press the OPEN/CLOSE button.
The unit beeps 3 times and raises the monitor
automatically.
Some of this unit's functions, cannot be performed
while the vehicle is in motion. Be sure to stop your
vehicle in a safe location and apply the parking
brake, before attempting these operations.
NOTES
• The CVA-1003 is a precision device. With gentle
handling, its unique capabilities can be enjoyed for a
long time.
1
Press the PWR (Power) button to turn on the
unit.
• If the monitor touches an obstacle while it is being
raised, the unit will stop raising the monitor
immediately. Should this occur, remove the obstacle
and press the OPEN/CLOSE button again to raise the
monitor.
The opening screen appears automatically on
the monitor display.
NOTE
The unit can be turned on by pressing any other button
except the OPEN/CLOSE and ANGLE 7 8 button.
• When the movable monitor is opened, do not place any
object on the monitor and be careful not to bump or
apply any pressure to the monitor while it is open. This
can cause damage to the mechanism.
• Under low ambient temperature conditions, the
display may be dark for a short period of time
immediately after the power is turned on. Once the
LCD has warmed up, the display will return to
normal.
• For your safety, some operation of the unit cannot be
performed while the vehicle is in motion. In this case,
first stop the vehicle and engage the parking brake,
then perform the operation.
The volume level gradually increases to the previous
level you were listening to before the unit was turned
off. Press and hold the PWR (Power) button for at
least 2 seconds to turn off the unit.
NOTES
• After turning the system off, a slight ghost of the image
will remain temporarily. This is an effect peculiar to
LCD technology and is normal.
• Under cold temperature conditions, the screen may
lose contrast temporarily. After a short warm-up
period, it will return to normal.
• The CVA-1003 draws minimal current even when its
power switch is turned off. If the switched power
(ignition) lead of the CVA-1003 is connected directly
to the positive (+) post of the vehicle's battery, the
battery may be discharged. If this lead is unswitched,
it must be disconnected from the battery post should
the vehicle be left unused for an extended period of
time.
An SPST (Single-Pole, Single-Throw) switch (sold
separately) can be added to simplify this procedure.
Then, you can simply place it in the OFF position
when you leave the vehicle. Turn the SPST switch back
ON before using the CVA-1003. For connecting the
SPST switch, refer to "Connections Diagram of SPST
Switch" on page 47.
• Some operation of the unit cannot be performed while
the vehicle is in motion. In this case, be sure to first
stop your vehicle and apply the parking brake, then
perform the operation.
7
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
MUTE
OPEN/CLOSE
ANGLE 7 8
7 8
MODE/LOUD
Lowering the Monitor
Adjusting the Monitor Viewing
Angle
1
Press the OPEN/CLOSE button.
The unit will beep 3 times and lower the monitor
automatically.
Adjust the monitor's angle for better visibility.
NOTES
• The CVA-1003 is a precision device. With gentle
handling, its unique capabilities can be enjoyed for a
long time.
• If the monitor touches an obstacle while it is being
lowered, the unit will stop lowering the monitor
immediately.
1
Press the ANGLE 7 8 buttons to adjust the
monitor's angle so the screen will be in the best
viewing position. Each press of the buttons
produces a beep and changes the screen angle
between 40 and 105 degrees.
When you press and hold the 7 or 8 (ANGLE)
button for at least 2 seconds, the monitor's angle
keeps moving until you release the button.
Should this occur, remove the obstacle and press the
OPEN/CLOSE button again to lower the monitor.
NOTES
Selecting the Monitor's Opening
Position
• If the monitor touches an obstacle while the angle is
being adjusted the unit will stop the screen
immediately.
Should this happen, remove the obstacle and press the
ANGLE 7 8 button again.
The monitor's opening position has 2 settings.
• The screen color will vary when viewed at certain
angles. Adjust the screen angle for the best viewing
position.
• If the voltage of the vehicle's battery power is low, the
screen may blink when the screen angle is changed.
This is normal and not a malfunction.
1
Press and hold the OPEN/CLOSE button for at
least 2 seconds while the monitor is being raised.
Each press changes the monitor position back or
forth.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
8-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Adjusting Volume/Balance
(Between Left and Right)/Fader
(Between Front and Rear)
Audio Mute Function
Activating this function will instantly lower the
volume level by 20 dB.
1
Press the MODE button repeatedly to choose
the desired mode.
Each press changes the modes as follows:
1
Press the MUTE button to activate the MUTE
mode. The audio level will decrease by about
20 dB.
Pressing the MUTE button again will bring the
audio back to its previous level.
→ VOL
→ BAL
→ FAD
NOTES
• If the 5 or 6 button is not pressed in 5 seconds after
selecting the BALANCE, or FADER mode, the unit
automatically returns to the VOLUME mode.
• If the subwoofer is ON, its level can also be adjusted
using the MODE button.
NOTE
When an external interruption (e.g., vehicle phone)
happens, the display shows as follows:
The monitor display: INT.
The sub display: INTERRUPT
This function is only available when the Interrupt lead of
the Auxiliary device is connected to the unit.
2
Press the 7 and 8 buttons until the desired
sound is obtained in each mode.
Turning Loudness On and Off
Loudness introduces a special low- and high-
frequency emphasis at low listening levels. This
compensates for the ear's decreased sensitivity to
bass and treble sound.
1
Press and hold the LOUD button for at least
2 seconds to activate or deactivate the loudness
mode.
The display shows "LOUD" when the loudness
mode is activated.
NOTE
When connecting an external audio processor to the unit,
you cannot use this function.
9
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
A.ME/TUNE
BAND
SOURCE
g DN
f UP
Preset buttons
(1 through 6)
Example of Radio Mode Screen
Selected Source
Preset button number for
the stored station
Frequency of the current
station
The current setting status
Volume Level
Current Time
Manual Tuning
Automatic Seek Tuning
1
Press the SOURCE button until a radio band and
frequency appears in the display.
1
Press the SOURCE button until a radio band and
frequency appears in the display.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
Each press changes the band:
→ FM1 → FM2 → AM
→ FM1 → FM2 → AM
3
4
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
3
4
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
NOTE
The initial mode is DX SEEK.
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
NOTE
The STEREO indicator appears on the monitor display
when a Stereo FM station is tuned in.
Press the g DN or f UP button to
automatically seek for a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
10-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operation
Manual Storing of Station Presets
Automatic Memory of Station
Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
1
2
3
Press the SOURCE button to select the radio
mode.
2
Press and hold any one of the Preset buttons (1
through 6) for at least 2 seconds until the station
frequency (sub display) or preset number
(monitor display) on the display blinks.
Press the BAND button repeatedly until the
desired radio band is displayed.
Press and hold the A. ME button for at least 2
seconds.
3
4
Press the Preset button into which you wish to
store the station while the frequency (sub
display) or preset number (monitor display) is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (9*) and station
frequency memorized.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band. They
will be stored into presets 1 to 6 buttons in order
of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
* displayed in sub display
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM.)
Tuning to Preset Stations
1
2
3
Press the SOURCE button to select the radio
mode.
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Press the BAND button repeatedly until the
desired band is displayed.
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
11-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
XM Radio Operation (Optional)
SETUP
BAND
SOURCE
Preset buttons
(1 through 6)
g DN
f UP
Preset 4
1
2
Press the SOURCE button to select RADIO
Mode.
Receiving the XM Channels with
the XM Receiver (Optional)
Press the BAND button to select XM1 or XM2.
Each press changes the band:
XM Satellite Radio* is the next generation of
audio entertainment, with up to 100 brand-new
digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports,
news and talk, coast-to-coast via satellite. For
more information, visit XM’s website at
→ FM1 → FM2 → XM1 → XM2 → AM
3
Press the g DN or f UP button to select
the desired channel. Holding the g DN or
f UP buttons will change channels
continuously.
An optional XM Satellite Radio Receiver may be
connected to the CVA-1003 if it is Ai-NET
compatible. With an XM Receiver connected to
the Ai-NET input of the CVA-1003, the XM
Reciever will be controllable from the CVA-1003.
* XM and its corresponding logos are trademarks
of XM Satellite Radio Inc.
NOTES
• The controls on the CVA-1003 for XM Receiver
operation are operative only when an XM Receiver is
connected.
• The XM1 or XM2 band illuminates when in XM mode.
12-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
XM Radio Operation (Optional)
Checking the XM Radio ID Number
Storing of XM Channel Presets
1
Press the BAND button to select the desired
band (XM1 or XM2) you want to store.
You need to provide XM with the unique XM
Radio ID number for your XM Radio Receiver in
order to subscribe to XM's programming.
2
After tuning in the desired channel, press and
hold any one of the Preset buttons (1 through
6) for at least 2 seconds until the channel
number (sub display) or preset number (monitor
display) on the display blinks.
This number is an 8 character alphanumeric
number that is printed on a lebel directly on the
XM Receiver.
It can also be displayed on the screen of the CVA-
1003 in the following way.
3
4
Press the Preset button into which you wish to
store the channel while the frequency (sub
display) or preset number (monitor display) is
blinking (within 5 seconds).
The display stops blinking once the channel has
been memorized. The display shows the band,
preset No. with a triangle (9*) and channel
number memorized.
1
While receiving XM1/XM2, press the g DN or
f UP button to select channel "0."
2
3
The unit alternately displays "RADIO ID" for 2
seconds, then the ID number for 10 seconds.
To cancel the ID number display, set the channel
to other than "0."
* displayed in sub display
Repeat the procedure to store up to 5 other
channels onto the same band.
NOTE
There is another way to display your ID number.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 12 channels can be stored in the preset
memory (6 channels for each band; XM1 and
XM2).
1. When the monitor display is open, press and hold the
SETUP button for at least 3 seconds.
2. Press the Preset 4 button to select the XM setting
mode. Press the Preset 4 button again to select ID.
ID No. is displayed.
When ID No, is more than 8 digits, press and hold the
g DN or f UP button to scroll the ID No.
NOTE
If you store a channel in a preset memory which already
has a station, the current channel will be cleared and
replaced with the new one.
3. After checking your ID number, press the SETUP
button to return to the normal display.
Receiving the stored XM Channels
1
Press the BAND button to select the desired
band (XM1 or XM2).
→ FM1 → FM2 → XM1 → XM2 → AM
2
Press the channel Preset button that has your
desired satellite channel in memory.
13-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
XM Radio Operation (Optional)
TITLE
TUNE
g DN
f UP
Category Search
Changing the Display
Category Search functionality allows you to
search for a specific channel by the category of
programming it offers, or to surf within a given
category.
Text information, such as the channel name, artist
name/feature, and song/program title, is available
with each XM channel. The unit can display this
text information as explained below.
1
2
In XM mode, press the TUNE button to display
the category of the channel that is currently
selected for 5 seconds.
1
In XM mode, press the TITLE button.
Each time you press this button, the display
changes as shown below.
When the monitor is open: displayed in the
monitor display
While the category is displayed, press the
g DN or f UP button to select a different
category (or leave it to stay with the same
category.)
Channel Number
display
Artist Name
display
Song Title
display
→
→
→
3
Within 5 seconds of selecting the category, press
the TUNE button again to select the next channel
within that category. Repeatedly press the TUNE
button within 5 seconds to select additional
channels within that category.
When the monitor is closed: displayed in the
sub display
Channel Number
display
CLOCK
display
Channel Name
display
→
→
→
Song Title
display
Artist Name
display
←
←
When tuned in, the category is displayed for 5
seconds, then the display returns to normal
mode.
NOTES
NOTE
• When The “CD Text Scroll Setting” (refer to page 33)
is set to “SCROLL ON”, the display scrolls.
When the CD Text Scroll Setting is set to “SCROLL
OFF”, the display scrolls only when you operate the
unit (POWER ON, BAND, etc., are displayed.)
• “Channel Number” and “Clock” displays do not
scroll.
If you cannot find your desired category, the display
shows “– – – – – – (displayed in the monitor display),
– – – – (displayed in the sub display)” for 5 seconds.
Then, the display will return to the normal display.
14-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player/Changer Operation (Optional)
:/J
SOURCE
g DN
f UP
CHG
Example of CD Mode Screen
Selected Source
Track number
(DISC number in the
Changer Mode)
Elapsed playing time
The current setting status
Volume Level
Current Time
Playing Optional CD Player or
Changer
Music Sensor (Skip)
1
Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
When an optional Alpine CD player or CD
changer is connected, you can control it from the
CVA-1003. This section describes operation
assuming that an Alpine CD player is connected.
(When a CD changer is connected, see page 18
to select your desired disc.)
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
You can directly select the CD Changer mode by
pressing the CHG (changer) button on the CVA-
1003.
NOTE
The music sensor feature is functional in the play or
pause mode.
1
Press the SOURCE button until the "CD"
appears in the display.
Insert a CD into the CD player, the player starts
playing.
2
3
To pause playback, press the :/J button.
Pressing the :/J button again will resume
playback.
To eject the CD, press the eject button on the
CD player.
15-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player/Changer Operation (Optional)
TITLE
:/J
g DN
f UP
M.I.X.
RPT SCAN
Fast Forward and Backward
M.I.X. (Random Play)
1
Press and hold the g DN or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
1
Press the M.I.X. button in the play or pause mode.
The tracks on the disc will be played back in a
random sequence. After all the tracks on the disc
have been played back once, the player will
begin a new random sequence play until the
M.I.X. mode is cancelled.
Repeat Play
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
1
Press the RPT (Repeat) button to play back
repeatedly the track being played.
The track will be played repeatedly.
NOTES
• If a CD Changer equipped with the ALL M.I.X.
function is connected, ALL M.I.X. will also be
selectable.
In this mode, the tracks on all the CDs in the current
magazine will be included in the random playback
sequence.
Press the RPT button again and select OFF to
deactivate the repeat play.
NOTES
• If a CD Changer is connected and the RPT (REPEAT)
ALL mode is selected, the unit repeatedly plays back
all tracks on the disc selected.
→ M.I.X. → ALL M.I.X. → (off)
Displayed in the monitor display:
When the monitor display is open: displayed in the monitor
display
→ REPEAT → REPEAT ALL → (off)
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to light the
"FUNC" indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to light the
"FUNC" indicator in red and go to step 1.
When the monitor display is closed: displayed in the sub
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to illuminate
the "FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to
illuminate the "FUNC" indicator and go to step 1.
Displayed in the sub display:
→ RPT → RPT ALL → (off)
When the monitor display is open: displayed in the monitor
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to light the
"FUNC" indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to light the
"FUNC" indicator in red and go to step 1.
When the monitor display is closed: displayed in the sub
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to illuminate
the "FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to
illuminate the "FUNC" indicator and go to step 1.
16-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player/Changer Operation (Optional)
1
When the monitor display is open, press the
TITLE button and select the title display mode.
For details, see Displaying the Title/Text (page
26).
Scanning Programs
1
Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
2
3
Press and hold the TITLE button for at least 3
seconds. The first character will blink.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
Press the g DN or f UP button to select
the desired letter/numeral/symbol available for
naming.
NOTES
When the monitor display is open: displayed in the monitor
display
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to light the
"FUNC" indicator in red and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to light the
"FUNC" indicator in red and go to step 1.
When the monitor display is closed: displayed in the sub
display
4
Press the :/J button to store the first character.
The first character will stop blinking and the
display will automatically advance to the next
character. When that character begins to blink,
you may choose the next letter or symbol of your
title.
• In case a 6-disc CD changer is connected:
In CD changer mode, press the FUNC button to illuminate
the "FUNC" indicator and go to step 1.
• In case a 12-disc CD changer is connected:
In changer mode, press the FUNC button twice to
illuminate the "FUNC" indicator and go to step 1.
5
Repeat the steps 3 and 4 above to complete the
titling. Pressing the :/J button after entering the
8th character, automatically stores the title into
memory.
When entering a title of less than 8 characters
(for example, 3 character title):
After entering 3 characters to complete your title,
the 4th character space will be blinking. Go to
step 6 to complete the title.
Titling Discs
It is possible to title your favorite CD’s.
To display the Title display mode:
To title a disc, your vehicle must be parked with the
ignition key in the ACC or ON position.To do this, follow
the procedure below.
6
Press and hold the TITLE button for at least 3
seconds to record the title.
NOTES
• The memory can store up to 150 titles for CD changer.
If you try to store beyond the limit, the display will
show "FULL DATA." At this point, no more titles can
be stored.
1. Push the foot brake to bring your vehicle to a
complete stop at a safe location. Engage the parking
brake.
2. Keep pushing the foot brake and release the parking
brake once then engage it again.
3. While the parking brake is being engaged the
second time, release the foot brake.
• The CD Changer title length or memory capacity
varies depending upon the model being used.
• When you want to erase a title, enter the "
symbol into all spaces.
"
• The operations described in steps 3 to 5 must be made
within 10 seconds. The input mode will be cancelled if
no action is taken for over 10 seconds.
• Removing power from the unit may delete these titles.
Use caution when manipulating the power cord.
NOTE
For automatic transmission vehicles, place the transmission
lever in the Park position.
Now, the locking system for the Title display mode
operation has been released. Unless the ignition key is
turned to the OFF position, the Title display mode can
be activated by engaging the parking brake without
performing the above procedure (1 through 3).
Each time the ignition key is turned to the OFF
position, perform the above procedure.
NOTE
If you try to access this screen while driving, the warning-
CAN'T OPERATE WHILE DRIVING will be appeared.
17-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player/Changer Operation (Optional)
TITLE
:/J
BAND
SOURCE
Select buttons
(1 through 6)
g DN
f UP
Erasing Disc Title
Controlling CD Changer
1
When the monitor display is open, press the
TITLE button to select the disc titling mode.
Then, press and hold for at least 3 seconds.
An optional 6-disc or 12-disc CD Changer may be
connected to the CVA-1003 if it is Ai-NET
compatible. With a CD Changer connected to the
Ai-NET input of the CVA-1003, the CD Changer
will be controllable from the CVA-1003.
Using the KCA-400C (the Multi-Changer
Switching device) multiple changers can be
controlled by the CVA-1003.
2
Press and hold the -/J button for at least 2
seconds to activate the title scanning mode. The
title in the display will blink.
3
4
5
Press the g DN or f UP button repeatedly
until the disc title you want to erase is displayed.
See the Multi-Changer Selection section on page
19 for selecting the CD Changers.
Press and hold the -/J button for at least 2
seconds to erase the disc title displayed.
NOTE
The controls on the CVA-1003 for CD Changer operation
are operative only when a CD Changer is connected.
Press and hold the TITLE button for at least 3
seconds to cancel the disc title erasing mode.
1
Press the SOURCE button to activate the CD
changer mode. The display shows the disc
number and track number.
NOTE
You cannot erase a CD-TEXT.
NOTE
The source indicator varies depending on the connected
source.
18-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player/Changer Operation (Optional)
2
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
3
The CD Changer Selection mode remains active
for 3 seconds after step 2 is performed. Press
the BAND button until the desired CD Changer
indicator appears on the display.
NOTES
NOTE
• After selecting the desired disc, you can operate in the
same way as for the CVA-1003 CD player.
For details, please see the CD Operation section.
• When the “FUNC” indicator is lit in red in the
monitor display, or is lit in the sub display, the disc
select buttons become nonfunctional.
If the selected CD Changer is not connected, the display
will show "NO CHANGER."
Alternatively press the BAND button on the
Remote Control until the desired changer
indicator appears on the display.
When a 12-disc CD Changer is connected:
To select discs numbered from 1 to 6, the
procedure is the same as for the 6-disc CD
Changer. To select discs numbered from 7 to 12,
first press the FUNC button. In the sub display,
this changes the "D" indicator to "d." The "FUNC"
indicator is lit in yellow on the monitor display.
Then press the desired Preset button. With the
FUNC button activated, the Preset buttons 1 to 6
will represent discs 7 to 12 respectively.
4
To operate the selected changer, see "CD Player
Operation" section.
NOTE
If an optional CD/MD/DVD player is connected to the
unit, the disc mode can be switched each time you press
the BAND button (see "Switching Disc Mode" on page
39.)
Multi-Changer Selection
Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers.
1
Press the SOURCE button on the CVA-1003 to
activate the CD Changer mode.
Alternatively, press the SOURCE button on the
Remote Control (optional) to activate the CD
Changer mode. Proceed to step 3 below to
select the desired CD Changer.
2
Press the BAND button on the CVA-1003 or the
Remote Control to activate the CD Changer
Selection mode.
19-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MD Player Operation (Optional)
:/J
SOURCE
g DN
f UP
M.I.X.
RPT
Example of MD Mode Screen
Selected Source
Track number
Elapsed playing time
The current setting status
Volume Level
Current Time
Playing Mini-Disc (MD)
Music Sensor (Skip)
1
Momentarily press the g DN button once to
return to the beginning of the current track. If you
wish to access the beginning of a track further
back, repeatedly press until you reach the
desired track.
When an optional Alpine MD player is connected
to the CVA-1003, you can control the player from
the CVA-1003.
(When the MDA-5051 is connected, MDs can be
played back only.)
2
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
1
Press the SOURCE button until the "MD"
appears in the display.
Insert an MD into the MD player, the player starts
to play the MD.
NOTE
Before inserting an MD, use your finger to feel around
the MD cartridge. If you feel any small bumps or
irregularities, remove them because these may cause a
malfunction or damage to the player.
2
3
Press the :/J button to temporarily pause play.
To resume play, press the :/J button for a
second time.
Press the eject (c) button on the MD player
when you want to eject the MD.
20-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
MD Player Operation (Optional)
Fast Forward and Backward
1
Press and hold the g DN or f UP button to
quickly move backward or forward until you
reach the desired section of the track.
When you reach the desired section, release the
button. The player starts playing from that
section.
Repeat Play
1
Press the RPT button to play back repeatedly the
track being played. The RPT (Repeat) indicator
appears and the track plays repeatedly.
Press the RPT button repeatedly until the RPT
(Repeat) indicator disappears to deactivate the
repeat play.
M.I.X. (Random Play)
1
Press the M.I.X. button in the play or pause
mode. The M.I.X. indicator will illuminate and the
tracks on the disc will be played back in a
random sequence. After all the tracks on the disc
have been played back once, the player will
begin a new random sequence play until the
M.I.X. mode is deactivated.
To stop the M.I.X. play, press the M.I.X. button
repeatedly until the M.I.X. indicator disappears.
21-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette Player Operation (Optional)
SOURCE
Controlling Cassette Player
If an optional Alpine cassette player is connected
to the CVA-1003, it can be controlled from the
CVA-1003.
1
2
Press the SOURCE button until the "TAPE"
appears in the display.
Insert a cassette tape into the cassette player.
The player starts playing.
To stop tape play and eject the cassette tape,
press the EJECT button on the cassette player.
22-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/Video CD/CD Player Operation (Optional)
:/J
SOURCE
g DN
f UP
Now, the locking system for the DVD mode
operation has been released. Unless the ignition key
Playing DVD/Video CD/CD
is turned to the OFF position, the DVD mode can be
activated by engaging the parking brake without
performing the above procedure (1 through 3).
Each time the ignition key is turned to the OFF
position, perform the above procedure.
If an optional Alpine DVD/video CD/CD player is
connected to the CVA-1003, you can control it from
the CVA-1003.
WARNING
NOTE
It is dangerous (and illegal in many states) for the
driver to watch the TV/Video while driving the
vehicle. The driver may be distracted from looking
ahead and an accident could occur.
If you try to activate the DVD mode while driving, the
warning-PICTURE OFF FOR YOUR SAFETY will be
displayed in the monitor display.
1
Press the SOURCE button to select the DVD
mode.
Insert a disc into the DVD/video CD/CD player,
the player starts playing.
Install the CVA-1003 correctly so that the driver
cannot watch TV/Video unless the vehicle is
stopped and the emergency brake is applied.
If the CVA-1003 is not installed correctly, the
driver will be able to watch the TV/Video while
driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or
other people could be severely injured.
Still/Pause
1
Press the :/J button during DVD/video CD/CD
play to freeze frame or pause. To resume normal
play, press the :/J button for a second time.
Chapter (DVD)/Track (Video CD)
Sensor
To activate the DVD mode:
To watch a video source, your vehicle must be
parked with the ignition key in the ACC or ON
position. To do this, follow the procedure below.
1
Lightly press the g DN or f UP button
during DVD/video CD/CD play to return to the
beginning of the chapter/track being currently
played or advance to the beginning of the next
chapter/track respectively.
1. Push the foot brake to bring your vehicle to a
complete stop at a safe location. Engage the
parking brake.
2. Keep pushing the foot brake and release the
parking brake once then engage it again.
3. While the parking brake is being engaged the
second time, release the foot brake.
NOTE
The word "chapter or track" means a division of the
recorded picture/sound on a DVD/video CD/CD
respectively.
NOTE
For automatic transmission vehicles, place the transmission
lever in the Park position.
23-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/Video CD/CD Player Operation (Optional)
SOURCE
Disc Select
buttons
(1 through 6)
g DN
f UP
CHG
RPT
Fast Forward/Backward
Controlling DVD Changer
1
Press and hold the g DN or f UP button
during play to fast backward or forward
respectively. Release the button when you reach
the desired portion you wish to play. Playback
starts from that portion.
If an optional Alpine DVD Changer is connected
to the CVA-1003, the DVD Changer can be
controlled from the CVA-1003.
You can directly select the DVD Changer mode by
pressing the CHG (changer) button on the CVA-
1003.
Repeat Play
1
2
Press the SOURCE button. The "DVD Changer"
appears in the monitor display.
“DVD CHG” is displayed in the sub display.
1
Press the RPT button during play to repeatedly
play the chapter/track or title/disc being currently
played.
Each press changes the repeat play as follows:
Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
DVD changer.
DVD:
Chapter
(repeat play)
Title
(repeat play)
Repeat Off
(normal play)
→
→
→
→
Playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same may as for the DVD/Video CD/CD Player.
For details please see the DVD/Video CD/CD Player
Operation section.
Video CD/CD:
Track
→
Disc
Repeat Off
→
(repeat play)
(repeat play) (video CD only)
• When the “FUNC” indicator is lit in red in the
monitor display, or is lit in the sub display, the disc
select buttons become nonfunctional.
NOTES
• The track/disc repeat modes cannot be used on video
CDs with playback control (PBC). Press "MENU" to
turn the PBC function off. For more details, see the
operating instructions of your DVD player or DVD
changer.
When the monitor display is open: displayed in the
monitor display
• In case a 6-disc DVD changer is connected:
In DVD changer mode, press the FUNC button to light
in red the "FUNC" indicator and go to step 1.
When the monitor display is closed: displayed in the
sub display
• In case a 6-disc DVD changer is connected:
In DVD changer mode, press the FUNC button to
illuminate the "FUNC" indicator and go to step 1.
24-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation System Operation (Optional)
SOURCE
Turning on the Navigation Mode
If an optional Alpine Navigation System is
connected , The display shows the navigation
screen.
1
Press the SOURCE button to select the
Navigation mode.
NOTE
If the Navigation mode does not appear in the display
by pressing the SOURCE button, set the external setting
of NAV.IN to ON (refer to "Setting the External Input" on
page 37.)
25-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
TITLE
CD changer mode:
The monitor display is open.
(displayed in the monitor display)
Displaying the Title/Text
It is possible to display the CD title if the title has
been previously inputted. For details, see Titling
Discs (page 17).You can display disc/track names
during playback of CD text discs or MDs with
input titles.
↓
ELAPSED TIME DISPLAY
↓
1
∗
TEXT DISPLAY (DISC NAME)
↓
1
∗
TEXT DISPLAY (TRACK NAME)
↓
1
In the MD/CD changer mode, press the TITLE
button.
2
∗
TITLE DISPLAY
The mode will change every time the button is
pressed.
CD changer mode:
The monitor display is closed.
(displayed in the sub monitor)
1
∗
Displayed during playback of a CD with CD
Text. "NO TEXT" will be displayed when the
CD does not contain CD Text information.
"NO TITLE" appears if the title has not been
input.
↓
ELAPSED TIME DISPLAY
↓
2
∗
CLOCK DISPLAY
↓
1
∗
TEXT DISPLAY (DISC NAME)
↓
About "Title" and "Text"
1
∗
TEXT DISPLAY (TRACK NAME)
Title: Lets you input characters for the unit to
display.You can enter the name of a CD as a
title.You cannot assign titles to MDs with this
unit.You can however display MD titles that
were assigned when it was recorded. Some
characters may not be displayed correctly.
Text: Lets you display characters of a CD text disc.
↓
2
∗
TITLE DISPLAY
CD text disc mark indicates that the CD has
text data.
However, some characters may not be
displayed correctly.
26-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
MD mode:
The monitor display is open.
(displayed in the monitor display)
2
∗
TITLE DISPLAY (DISC NAME)
2
∗
TITLE DISPLAY (TRACK NAME)
MD mode:
The monitor display is closed.
(displayed in the sub monitor)
↓
2
∗
TITLE DISPLAY (DISC NAME)
↓
2
∗
TITLE DISPLAY (TRACK NAME)
↓
ELAPSED TIME DISPLAY
↓
CLOCK DISPLAY
NOTES
• Some characters may not be displayed correctly with
this device, depending on the character type.
• The display may not show all the information of the
CD Text depending on the CD changer.
27-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Preset 1
Preset 2
bass engine
g DN
f UP
Preset 1
Preset 2
bass engine
g DN
f UP
NOTES
Setting the Bass Control
• If no buttons are pressed within 10 seconds, the Bass
control setting will be turned off automatically.
• Depending on the type of external audio processors
connected to the unit, you may not be able to set some
settings.
You can change the Bass Frequency emphasis to
create your own tonal preference.
• The settings of the Bass will be individually
memorized for each source (FM, AM and CD) until
the setting is changed. Depending on the connected
devices, some functions and display indications do not
work.
1
When the monitor display is open, press the bass
engine button. Bass engine mode is displayed in
the monitor display.
2
3
Press the Preset 1 button to select the desired
mode.
Operation with the monitor display closed
You can set the Bass control with the monitor
display closed.
Press the g DN or f UP button to adjust
the selected mode.
• Bass Level : -7~+7
You can emphasize or weaken the bass
frequency.
• Bass center frequency :
1
2
Press the bass engine button.
Press the Preset 1 button. BASS is displayed
for 2 seconds in the sub display, then the
value of BASS Level blinks.
60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz ↔ 100Hz ↔ 130Hz ↔ 150Hz ↔ 200Hz
Emphasizes the displayed Bass frequency
ranges.
• Bass Band Width (Q-Factor):
WIDE1 ↔ WIDE2 ↔ WIDE3 ↔ WIDE4
3
Each time you press the Preset 1 button, the
blinking shifts.
Example of sub display
(Narrow) .............................. (Wide)
←
→
Changes the displayed frequency's band width
to wide or narrow.
4
Press the g DN or f UP button to
adjust the selected mode.
4
Press the bass engine button to return to the
normal mode.
28-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Setting the Treble Control
Operation with the monitor display closed
You can set the Treble control with the monitor
display closed.
You can change the Treble Frequency emphasis
to create your own tonal preference.
1
2
Press the bass engine button.
Press the Preset 2 button. TREBLE is
displayed for 2 seconds in the sub display,
then the value of TREBLE Level blinks.
1
When the monitor display is open, press the
bass engine button. Bass engine mode is
displayed in the monitor display.
3
Each time you press the Preset 2 button, the
blinking shifts.
2
3
Press the Preset 2 button to select the desired
mode.
Example of sub display
Press the g DN or f UP button to adjust
the selected mode.
• Treble Level : -7~+7
You can emphasize the treble frequency.
• Treble center frequency:
10.0kHz ↔ 12.5kHz ↔ 15.0kHz ↔ 17.5kHz
Emphasizes the displayed Treble frequency
ranges.
4
Press the g DN or f UP button to
adjust the selected mode.
4
Press the bass engine button to return to the
normal mode.
NOTES
• If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
• Depending on the type of external audio processors
connected to the unit, you may not be able to set some
settings.
• The settings of the Treble will be individually
memorized for each source (FM, AM and CD) until
the setting is changed. Depending on the connected
devices, some functions and display indications do not
work
29-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
SETUP
Preset 1
Preset 3
bass engine
g DN
f UP
Example of SETUP Screen
Selected Mode
Selected Preset Number
Setting items of the
Display Setting
Mode
Setting/Adjusting status
Volume Level
Current Time
Switching Phase
Turning Defeat Mode On and Off
Before switching Phase, select the Subwoofer ON
(refer to "Subwoofer Control On and Off" on page
38).
When the defeat mode is on, the sound signals
bypass the surround circuits and directly go to the
line output. The equalizer curve, therefore,
becomes flat.
1
2
3
Press the bass engine button to turn on the
Bass engine mode.
1
2
3
Press and hold the bass engine button for at
least 2 seconds to select the DEFEAT the mode.
Press the Preset 3 button to select Subwoofer
Phase mode.
Press the g DN or f UP button to set
DEFEAT to ON/OFF.
Press the g DN or f UP button to switch
the phase of the subwoofer output.
NORMAL ↔ REVERSE
When turning DEFEAT ON, you can return the
settings that you adjusted to the default settings.
DEFAULT:
Bass Level
4
Press the bass engine button to return to the
normal mode.
:
0
Bass Center Freq. : 80 Hz
Bass Band Width : WIDE1
Treble Level
Treble Center Freq. : 10.0 kHz
LOUD : OFF
NOTE
If no buttons are pressed within 10 seconds, the
Switching Phase setting will be off automatically.
:
0
4
Press and hold the bass engine button for at
least 2 seconds to return to normal mode.
30-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Illumination Control
Adjusting Brightness of Picture
To display the SETUP screen:
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
To display the Setup screen, your vehicle must be
parked with the ignition key in the ACC or ON
position. To do this, follow the procedure below.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
1. Push the foot brake to bring your vehicle to a
complete stop at a safe location. Engage the
parking brake.
2. Keep pushing the foot brake and release the
parking brake once then engage it again.
3. While the parking brake is being engaged the
second time, release the foot brake.
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select BRIGHT.
Press the g DN or f UP to make the
picture darker or brighter.You can adjust the
brightness between MIN (–16) and MAX (+16).
When it reaches the minimum or maximum point,
the display shows "MIN" or "MAX" respectively.
NOTE
For automatic transmission vehicles, place the
transmission lever in the Park position.
Now, the locking system for the SETUP screen
operation has been released. Unless the ignition
key is turned to the OFF position, the SETUP
screen can be activated by engaging the parking
brake without performing the above procedure (1
through 3).
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
Each time the ignition key is turned to the OFF
position, perform the above procedure.
NOTE
The Brightness setting for the Blue screen background
and the Color of the Picture source (AUX/DVD/NAV.)
will be individually memorized.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select DIMMER.
Press the g DN or f UP button to set the
Illumination control.
DIMMER AUTO:
In the Auto Dimmer mode, the background
illumination of the monitor is sychronized with
the instrument illumination of the vehicle (the
dimmer input lead should be connected.)
DIMMER ON:
deactivate the Auto Dimmer mode to keep the
background illumination bright.
DIMMER OFF:
keep the background illumination of the
monitor dark.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
31-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
SETUP
Preset 1
Preset 2
g DN
f UP
Adjusting Color of Picture
Adjusting Tint of Picture
Color adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes. Color
adjusment cannot be made if a Navigation system
with the RGB feature is connected.
Tint adjustment can be made only in the
navigation, DVD, AUX1 and AUX2 modes.
Tint adjusment cannot be made if a Navigation
system with the RGB feature is connected.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select COLOR.
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select TINT.
Press the g DN or f UP button to make
the color of the picture brighter or darker
respectively to get your desired color.You can
adjust the color between MIN (–16) and MAX
(+16). When it reaches the minimum or
maximum point, the display shows "MIN" or
"MAX" respectively.
Press the g DN or f UP button to adjust
the Tint (between –16 and +16). When it reaches
the minimum or maximum point, display shows
"R MAX" or "G MAX" respectively.
To set another setting, press the Preset 1 button
or another Preset button.
To set another setting, press the Preset 1 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTE
4
After setting is completed, Press the SETUP
button to return to normal mode.
The TINT setting for the Blue screen background and the
TINT of the Picture source (AUX/DVD/NAV.) will be
individually memorized.
NOTE
The Color setting for the Blue screen background and the
Color of the Picture source (AUX/DVD/NAV.) will be
individually memorized.
32-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Switching the Background Screen
CD Text/MD Title Scroll Setting
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
When connecting to Alpine’s CD/MD player or CD
changer, the disc or track name recorded on the
disc will scroll.This scrolling feature is available
only with text compatible CDs and MDs pre-
recorded with title.The scrolling feature will work
for titles that were input manually.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
Press the Preset 1 button to activate the
DISPLAY setting mode. Press the Preset 1
button again to select BACK GROUND.
1
2
Press and hold the SETUP button for at least 2
seconds.
Press g DN or f UP button to select the
desired settings.
Press the Preset 2 button to select GENERAL
Setting mode. Press the Preset 2 button to
select SCROLL.
AUTO : synchronizes the Dimmer mode setting.
When you turn on/off your interior car
light, the DAY/NIGHT switches
automatically when the Dimmer mode is
set to Auto.
When set to ON, the background
screen is set to NIGHT (dark blue).
When set to OFF, the background
screen is set to DAY(light blue).
NIGHT : sets the background screen color to
dark blue.
3
Press the g DN or f UP button and select
SCROLL ON or SCROLL OFF.
• SCROLL ON: the display of CD text or MD title
is scrolled continuously.
• SCROLL OFF: the display is scrolled only
when a disc is loaded or when a track is
changed.
DAY
: sets the background screen color to
light blue.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
To set another setting, press the Preset 1 button
or another Preset button.
NOTE
The unit scrolls only CD text names and MD title.
4
After setting is completed, Press the SETUP
button to return to normal mode.
33-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
OPEN/CLOSE
CLOCK
SETUP
TUNE
Preset 2
g DN
f UP
Setting Automatic Opening/
Closing of Monitor
Turning Sound Guide Function On
or Off
When the Automatic Opening/Closing mode is
The Sound Guide function will give audible
feedback with a beep sound when a button on the
unit is pressed to acknowledge the receipt of the
signal from the button.
"AUTO," the monitor automatically opens when
the ignition key is turned to the "ACC" or "ON"
position. The monitor automatically closes when
the ignition key is turned OFF.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
Press the Preset 2 button to activate the
GENERAL setting mode. Press the Preset 2
button again to select BEEP.
2
3
Press the Preset 2 button to activate the
GENERAL setting mode. Press the Preset 2
button again to select AUTO OPEN.
Press the g DN / f UP button to activate/
diactivate the Sound Guide mode. If you turn off
the Sound Guide mode, the sound guide beep
will not be produced when a button on the unit is
pressed.
Press the g DN or f UP button to set the
Auto Opening mode.
To set the Auto Opening mode OFF, press the
g DN or f UP button. If set to the "OFF"
position, the monitor should be manually opened
or closed by pressing the OPEN/CLOSE button.
To set another setting, press the Preset 2 button
or another Preset button.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
4
After setting is completed, Press the SETUP
button to return to normal mode.
34-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
Setting the Clock Display
Setting Time
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
1
2
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
Press the Preset 2 button to select GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK DISP.
Press the Preset 2 button to activate GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK ADJ., then press the TUNE button
or g DN / f UP button to appear the clock
adjusting menu.
Press the g DN or f UP button to turn off
or on the clock display on the monitor display
respectively.
3
4
Press the Preset 2 button to select HOUR. Then
press the g DN or f UP button to adjust
the hour.
To set another setting, press the Preset 2 button
or another Preset button.
Press the Preset 2 button to select MINUTE.
Then press the g DN or f UP button to
adjust the minutes.
4
After setting is completed, Press the SETUP
button to return to normal mode.
Displaying Time
To quickly set the time to the nearest hour, press
the Preset 2 button to select MINUTE ZERO,
then press the TUNE button or g DN / f UP
button.
If the minutes is ":30" or under, the hour is the
current number. If the minutes is more than ":30",
or If you set the minute to "00", the hour is
moved up.
1
When the monitor display is closed, press the
CLOCK button repeatedly until the clock time is
displayed in the sub display.
NOTES
• Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed
for about 5 seconds before the time returns to the
display.
To return to the previous mode, press the Preset
2 button to select RETURN, then press the
TUNE button, or the g DN or f UP button.
• The clock time is not shown on both the monitor
display and the sub display simultaneously.
5
After setting is completed, Press the SETUP
button to return to normal mode.
35-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
SETUP
Preset 3
Preset 5
g DN
f UP
4
After setting is completed, Press the SETUP
button to return to normal mode.
Selecting Rear Monitor
NOTE
When using the optional expansion BOX (KCE-
103V), If AUX/NAV. is to ON in "Setting the
External Input (page 37), and if a rear-seat
monitor and navigation system are connected to
the CVA-1003, you can switch the picture/sound
of the rear-seat monitor from the CVA-1003.
If a DVD player or DVD changer is connected to the
AUX 1 or AUX 2 terminal, the DVD picture appears by
performing steps 1 and 2 of "Simultaneous Operations"
on page 39. Then, perform steps 1 to 4 on this page so
the DVD picture and sound are output.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
Press the Preset 3 button to activate the
AUXILIARY setting mode. Press the Preset 3
button again to select AUX OUT.
Press the g DN or f UP button to activate
the AUX OUT setting mode.
AUX-1 IN : the picture/sound of the device
connected to Terminal AUX 1 will be
played on the rear-seat monitor.
AUX-2 IN : the picture/sound of the device
connected to Terminal AUX 2 will be
played on the rear-seat monitor.
NAV.IN : the navigation screen will be
displayed and the voice guidance will
be produced on the rear-seat monitor
if the navigation system is
connected.
OFF
: mode cancel AUX OUT.
To set another setting, press the Preset 3 button
or another Preset button.
36-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
2
Press the Preset 5 button to select the FM
setting mode. Press the Preset 5 button again to
select FM LEVEL.
Setting the External Input
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
To set another setting, press the Preset 5 button
or another Preset button.
3
Press the g DN or f UP button to select
the FM signal level HIGH or LOW to make the
signal levels between the FM band and CD
player closer.
1
2
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
To set another setting, press the Preset 5 button
or another Preset button.
Press the Preset 3 button to select the
AUXILIARY setting mode. Press the Preset 3
button to select the desired external input, AUX
IN or NAV.IN.
• If the expansion BOX KCE-103 (not supplied)
is connected and the unit is set to Expand Box
ON (page 39), you can select AUX-1 IN/AUX-2
IN/NAV.IN.
4
After setting is completed, Press the SETUP
button to return to normal mode.
Swiching the Tuner Mode
The CVA-1003 incorporates the MAX TUNE SQ
for the highest quality tuner audio. Moreover, you
can choose between two settings to suit your own
personal sound preferences usage.
3
Press the g DN or f UP button to set ON/
OFF.
To set another setting, press the Preset 3 button
or another Preset button.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
NOTE
1
1,
∗ ∗
2
2
∗
∗
When AUX IN (
AUX1 IN, AUX2 IN) and NAV.IN
are set to ON, the EXTERNAL INPUT is displayed
during the source and SIMUL switching.
1
∗
∗
When a DVD player or DVD changer is connected,
DVD player or DVD changer is displayed in the
display.
When more than two DVD players or DVD changers
are connected, DVD player is displayed in AUX1 IN,
and DVD changer is displayed in AUX2 IN.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 5 button to activate the FM
setting mode. Press the Preset 5 button again to
select CONDITION.
4
After setting is completed, Press the SETUP
button to return to normal mode.
Press the g DN or f UP button to select
the desired setting.
Adjusting Source Signal Levels
HI-FI: Sound quality priority setting
NORMAL: Standard setting
STABLE: Noiseless priority setting
If the difference in volume level between the CD
player and FM redio is too great, adjust the FM
signal level as follows.
To set another setting, press the Preset 5 button
or another Preset button.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
4
After setting is completed, Press the SETUP
button to return to normal mode.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
37-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
SETUP
BAND
g DN
f UP
Preset 6
V.SEL
Subwoofer Control On and Off
Interrupt Feature (MIX LEVEL)
After carrying out the steps 1 to 3 of "To display the
SETUP screen" described on page 31, perform the
operation show below.
With an Alpine navigation system connected to
the CVA-1003, the voice guidance of the
navigation system will be mixed with the radio or
CD/MD audio.You can also adjust the volume
level of the voice guidance.
If you use this unit connected to an external audio
processor, use the built in amplifier.You cannot
use this function with an external amplifier.
1
2
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
Press the Preset 6 button to set to the SYSTEM
setting mode. Press the Preset 6 button again to
select the SUB W. mode.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
3
4
Press the g DN or f UP button to select
Subwoofer ON or OFF.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
To set another setting, press the Preset 6 button
or another Preset button.
Press the Preset 6 button to activate the
SYSTEM setting mode. Press the Preset 6
button again to select MIX LEVEL.
After setting is completed, press the SETUP
button to return to normal mode.
NOTES
Press the g DN or f UP button to adjust
the volume level of the navigation system's voice
guidance in 7 steps.
• Initial mode is "Subwoofer ON."
• Set to "Subwoofer OFF" unless the subwoofer is used.
• When the subwoofer is turned on, the subwoofer
output level can be adjusted. For more details, refer to
the Adjusting Volume/Balance/Fader.
To turn off the navigation system's voice
guidance, press this button repeatedly until OFF
appears.
To set another setting, press the Preset 6 button
or another Preset button.
4
After setting is completed, Press the SETUP
button to return to normal mode.
NOTES
• The volume level of the audio will be automatically
reduced when the voice guidance of the Navigation
system starts.
• When the voice guidance of the Navigation system
starts to interrupt the audio, the display is
automatically changed to the navigation screen.
38-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
2
Within 5 seconds, press the
recall the stored setting.
or button to
Setting the External Expansion
Box
The sub display shows the setting mode.
NOTE
When using the optional expansion box (KCE-
103V), you can use this function.
For further information, refer to the instruction of the
remote control (not supplied.)
After carrying out the steps 1 to 3 of "To display
the SETUP screen" described on page 31,
perform the operation show below.
Simultaneous Operation
You can watch the video portion of another source
while listening to current source.
1
2
3
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
After carrying out the steps 1 to 3 of "To display
the SETUP screen" explained on page 31,
perform the operation described below.
Press the Preset 6 button to activate the
SYSTEM setting mode. Press the Preset 6
button again to select EXPAND BOX.
1
Press the V.SEL button to select the video
position.
Press the g DN or f UP button to set ON/
OFF.
Example
Expand Box ON: When connecting the
expansion box KCE-103V
(not supplied), set to ON.
Expand Box OFF: When not connecting the
expansion box KCE-103V
When not connecting the expansion BOX:
(Picture) RADIO
AUX∗
RADIO
NAV.
RADIO
→
→
→
(Voice)
RADIO
When connecting the expansion BOX (KCE-
103V):
(not supplied), set to OFF.
To set another setting, press the Preset 6 button
or another Preset button.
(Picture) RADIO
AUX1∗
RADIO
AUX2
RADIO
NAV.
RADIO
→
→
→
→
(Voice)
RADIO
4
After setting is completed, Press the SETUP
button to return to normal mode.
∗ If a DVD player or DVD changer is connected,
you can recieve the DVD picture/sound.
DVD player (DVA-5200) is connected:
Press the FUNC button on the remote control
supplied with the DVD player. The DVD picture
and sound are output.
Switching Disc Mode
Use this function when connecting the optional
CD/MD/DVD player, changer.
DVD player (DVA-5205) or DVD changer (DHA-
S680) is connected:
Press and hold the V. OUT button on the
remote control supplied with the DVD player or
DVD changer for at least 2 seconds. The DVD
picture and voice are output.
1
Press the BAND button to switch the Disc mode
in the CD/MD/DVD changer mode.
Example
→ External CD/MD
Changer
→ External DVD
DVD changer
NOTES
• When AUX IN (AUX1 IN, AUX2 IN) and NAV.IN are
set to ON, the AUX (AUX1, AUX2) and NAV. mode is
displayed (refer to "Setting the External Input" on
page 37).
←
←
Recalling Stored Settings
• To switch the sound source, press the SOURCE button
during SIMUL. If the picture and the sound are from
the same source, the SIMUL function is not cancelled.
You can recall the stored settings on the audio
processor with the optional remote control of this
unit with Alpine's audio processor.
2
Press and hold the V.SEL button for at least 2
seconds to cancel the SIMUL function.
1
Press the A.PROC button on the remote control.
39-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Useful Features
FUNC
Switching Display Modes
MODE3
After carrying out the steps 1 to 3 of "To display
the SETUP screen" explained on page 31,
perform the operation described below.
1
Press and hold the FUNC button for at least 2
seconds in the AUX or NAV. mode.
Each press changes the display modes as
follows:
In the Mode 3 (Cinema), the monitor displays a
normal picture by stretching out the picture
horizontally and vertically. This mode is good for
displaying a cinema type picture with the
proportion of 16 to 9.
→ MODE 1 → MODE 2 → MODE 3 → MODE 4
(WIDE)
(ZOOM) (CINEMA) (NORMAL)
MODE1
MODE4
In the Mode 1 (Wide), the monitor displays a
normal picture wider to fit in the wide-screen
monitor by evenly stretching out the picture
horizontally.
In the Mode 4 (Normal), the monitor displays
normal picture at the center of the screen with a
vertical black belt at each side.
MODE2
In the Mode 2 (Zoom), the monitor displays a
normal picture wider to fit in the wide-screen
monitor by unevenly stretching out. The center
portion of the picture is stretched out only slightly
in order to make the important center portion of
the picture look natural.
40-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation with the monitor display closed
You can operate this unit with the monitor display closed for the items below.
Basic Operation
MD Player Operation (Optional)
Turning Power On and Off...................................... 7
Adjusting Volume/Balance (Between Left and Right)/
Fader (Between Front and Rear) ..................... 9
Turning Loudness On and Off ................................ 9
Audio Mute Function .............................................. 9
Playing Mini-Disc (MD)......................................... 20
Music Sensor (Skip) ............................................. 20
Fast Forward and Backward................................. 21
Repeat Play.......................................................... 21
M.I.X. (Random Play) ........................................... 21
Radio Operation
Cassette Player Operation (Optional)
Manual Tuning ...................................................... 10
Automatic Seek Tuning......................................... 10
Manual Storing of Station Presets ....................... 11
Automatic Memory of Station Presets .................. 11
Tuning to Preset Stations ..................................... 11
Controlling Cassette Player.................................. 22
DVD/Video CD/CD Player Operation (Optional)
Playing DVD/Video CD/CD .................................. 23
Still/Pause ............................................................ 23
Chapter (DVD)/Track (Video CD) Sensor ............. 23
Fast Forward/Backward........................................ 24
Repeat Play.......................................................... 24
Controlling DVD Changer ..................................... 24
XM Radio Operation (Optional)
Receiving the XM Channels
with the XM Receiver ..................................... 12
Checking the XM Radio ID Number ..................... 13
Storing of XM Station Presets .............................. 13
Receiving the Stored XM Stations ....................... 13
Category Search .................................................. 14
Changing the Display ........................................... 14
Navigation System Operation (Optional)
Turning on the Navigation Mode .......................... 25
Other Useful Features
Displaying the Title/Text........................................ 26
Setting the Bass control ....................................... 28
Setting the Treble control...................................... 29
Switching Phase................................................... 30
Turning Defeat Mode On and Off ......................... 30
Displaying Time .................................................... 35
Recalling Stored Settings..................................... 39
CD Player/Changer Operation (Optional)
Playing Optional CD player or Changer ............... 15
Music Sensor (Skip) ............................................. 15
Fast Forward and Backward................................. 16
Repeat Play.......................................................... 16
M.I.X. (Random Play) ........................................... 16
Scanning Programs.............................................. 17
Controlling CD Changer ....................................... 18
Multi-Changer Selection ....................................... 19
41-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Radio
Unable to receive stations.
In Case of Difficulty
• No antenna or open connection in cable.
- Make sure the antenna is properly connected;
replace the antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the
antenna may not be grounded and connected properly.
- Check your antenna connections; make sure the
antenna is properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken,
replace the antenna with a new one.
If you encounter a problem, please review the items
in the following checklist. This guide will help you
isolate the problem if the unit is at fault. Otherwise,
make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle's ignition is off.
- If connected following instructions, the unit will not
operate with the vehicle's ignition off.
• Improper power lead connections.
- Check power lead connections.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its
mounting location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another
station.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace
with the proper value if necessary.
• Internal micro-computer malfunctioned due to
interference noise etc.
- Press the Reset switch with a ballpoint pen or other
pointed article.
• Weak or no battery power.
- Check battery.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle's interior temperature to operation
temperature range.
• Connections to the DVD/CD player, navigation system
are not securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle's interior temperature to cool.
Unclear or noisy display.
• Fluorescent plate is worn out.
- Replace the fluorescent plate.
Navigation system inoperative.
• Connections with the navigation system are improper.
- Check the connections with the navigation system and
connect the cables correctly and firmly.
Unclear picture display.
• Fluorescent tube is exhausted.
- Replace the fluorescent tube∗.
∗ The fluorescent tube replacement is not free of charge
even within the warranty period, for the tube is an
article of consumption.
42-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Indication for CD Changer
Indication for XM Radio Mode
ANTENNA
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
• The XM antenna is not connected to the XM radio
module.
- Check whether the XM antenna cable is attached
securely to the XM radio module.
ERROR - 01
UPDATING
• Malfunction in the CD Changer.
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your
Alpine dealer.
(Monitor display)
NO SIGNAL
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
(Sub display)
NO SIGNL
• XM signal is too weak at the current location.
- Wait until the car reaches a location with a stronger
signal.
ERROR - 02
• A disc is left inside the CD changer.
LOADING
- Press the EJECT button to activate the eject function.
When the CD changer finishes the eject function,
insert an empty CD magazine into the CD changer to
receive the disc left inside the CD changer.
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
OFF AIR
NO MAGAZINE (Monitor display)
NO MAGZN (Sub display)
• The channel currently selected has stopped
broadcasting.
- Select another channel.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
(Monitor display)
– – – – – –
NO DISC
(Sub display)
– – – –
• No indicated disc.
- Choose another disc.
• The user has selected a Channel Number that does not
exist or is not subscribed to.
- The unit will revert back to the previously selected
channel.
• There is no artist name/feature, song/program title, or
additional information associated with the channel at
that time.
Indication for Monitor
HI-TEMP
- No action needed.
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
43-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Specifications
MONITOR SECTION
Screen Size
6.5"
LCD Type
Operation System
Transparent type TN LCD
TFT active matrix
Number of Picture Elements 336,960 pcs. (1,440 × 234)
Effective Number
of Picture Elements
Illumination System
99.99% or more
U-shaped cold cathode
fluorescent tube.
FM TUNER SECTION
Tuning Range
87.7 – 107.9 MHz
Mono Usable Sensitivity
50 dB Quieting Sensitivity
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
530 – 1,710 kHz
Sensitivity (IEC Standard)
22.5 µV/27 dB
GENERAL
Power Requirement
14.4 V DC
(11–15 V allowable)
+32°F to +113°F
(0°C to +45°C)
45 W × 4
Operating temperature
Maximum Power Output
Maximum Pre-Output Voltage 2 V/10 k ohms
Bass
Treble
Weight
14 dB at 60 Hz
14 dB at 10 kHz
2.2 kg (4 lbs. 14 oz)
CHASSIS SIZE
Width
Height
178 mm (7")
50 mm (2")
Depth
165 mm (6-1/2")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6–3/4")
46.2 mm (1-13/16")
20.5 mm (13/16")
NOTES
• Due to continuous product improvement, specifications
and design are subject to change without notice.
• The LCD panel is manufactured using an extremely high
precision manufacturing technology. Its effective pixel
ratio is over 99.99%. This means that there is a possibility
that 0.01% of the pixels could be either always ON or
OFF.
44-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Before installing or connecting the unit, please
read the following and pages 3 and 4 of this
manual thoroughly for proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY
EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Warning
MAKE THE CORRECT CONNECTIONS.
Failure to make the proper connections may result in fire
or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL
THEM SECURELY.
Be sure to use only the specified accessory parts. Use of
other than designated parts may damage this unit internally
or may not securely install the unit in place. This may cause
parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE
GROUND.
(Check with your dealer if you are not sure.) Failure to do
so may result in fire, etc.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like
the seat rails) or sharp or pointed edges. This will prevent
crimping and damage to the wiring. If wiring passes through
a hole in metal, use a rubber grommet to prevent the wires
insulation from being cut by the metal edge of the hole.
BEFORE WIRING, DISCONNECT THE CABLE FROM
THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due
to electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED
IN SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual
to prevent obstructions when driving. Cables or wiring
that obstruct or hang up on places such as the steering
wheel, gear lever, brake pedals, etc. can be extremely
hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH
MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence
of moisture or dust. Moisture or dust that penetrates into
this unit may result in product failure.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying
capacity of the wire and result in fire or electric shock.
Precautions
• Be sure to disconnect the cable from the (–) battery post
before installing your CVA-1003. This will reduce any
chance of damage to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
DO NOT DAMAGE PIPE OR WIRING WHEN
DRILLING HOLES.
When drilling holes in the chassis for installation, take
precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such
precautions may result in fire.
•
When making connections to the vehicle's electrical
system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to
provide power for this unit. When connecting the CVA-
1003 to the fuse box, make sure the fuse for the intended
circuit of the CVA-1003 has the appropriate amperage.
Failure to do so may result in damage to the unit and/or
the vehicle. When in doubt, consult your ALPINE dealer.
The CVA-1003 uses female RCA-type jacks for connection
to other units (e.g. amplifier) having RCA connectors. You
may need an adaptor to connect other units. If so, please
contact your authorized ALPINE dealer for assistance.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR
STEERING SYSTEMS TO MAKE GROUND
CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or
any other safety-related system), or tanks should NEVER
be used for installations or ground connections. Using
such parts could disable control of the vehicle and cause
fire etc.
•
• Be sure to connect the speaker (–) leads to the speaker
(–) terminal. Never connect left and right channel
speaker cables to each other or to the vehicle body.
KEEP SMALL OBJECTS SUCH AS BOLTS OR
SCREWS OUT OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
IMPORTANT
Please record the serial number of your unit in the
space provided below and keep it as a permanent
record. The serial number plate is located on the
bottom of the unit.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT
HINDER VEHICLE OPERATION, SUCH AS THE
STEERING WHEEL OR GEARSHIFT.
Doing so may obstruct forward vision or hamper
movement etc. and results in serious accident.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
45-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
3
Installation
Installing the Monitor
Lock Pin
• Location
Before final installation, make sure the display
will not hamper gear shifting when it is opened
and closed in the chosen location.
Slide the CVA-1003 into the dashboard. When
the unit is in place, make sure the locking pins
are fully seated in the down position. This can be
done by pressing firmly in on the unit while
pushing the locking pin down with a small
screwdriver. This ensures that the unit is properly
locked and will not accidentally come out from
the dashboard. Install the Supplied Front Frame.
NOTE
Install at an angle within 30 degrees from horizontal.
1
Dashboard
Mounting Bracket
(Included)
Mounting Sleeve
(Included)
Removal
1 Use a small screwdriver (or similar tool) to
push the locking pins to the "up" position (see
above drawing). As each pin is unlocked,
gently pull out on the unit to make sure it does
not re-lock before unlocking the second pin.
2 Pull the unit out, keeping it unlocked as you do
so.
CVA-1003
Screws(M4x5)
(Included)
<JAPANESE CAR>
Slide mounting sleeve from main unit (see
Removal Procedure below). Slide the mounting
sleeve into the dashboard. Install the supplied
bracket to the monitor.
Installation using the vehicle's factory brackets.
CVA-1003
Ground Lead
2
Screw
Screws
(M4x5)
Metal Mounting Strap
Bolt Stud
Hex Nut
Mounting Bracket
(M5)
CVA-1003
Ground Lead
Chassis
Front Frame
(Included)
Reinforce the monitor with the metal mounting
strap (not supplied). Secure the ground lead of
the unit to a clean metal spot using a screw (
already attached to the vehicle’s chassis.
)
NOTE
For the screw marked
the chosen mounting
location.
, use an appropriate screw for
46-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries
various noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
Foot Brake Lead/Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
1
2
Vehicle Cable
Pinch Connector
Pliers
Monitor Cable
Stopper
Foot brake lamp
FOOT BRAKE
(Yellow/Black)
Foot brake switch
Foot brake lead
Parking brake lamp
Pinch Connector
CVA-1003
Chassis
PARKING BRAKE
Battery
(Yellow/Blue)
Pinch Connector
Parking brake lead
Parking brake switch
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
SPST SW (Optional)
IGNITION
BATTERY
(Red)
(Yellow)
CVA-1003
Battery
NOTE
If your vehicle has no ACC power supply, add an SPST
(Single-Pole, Single-Throw) switch (sold separately). If
the switched power (ignition) lead of the CVA-1003 is
connected directly to the positive (+) post of the vehicle’s
battery, the CVA-1003 draws some current (several
hundred milliamperes) even when its switch is placed in
the OFF position and the battery may be discharged.
47-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
Basic Connections
Antenna
1
2
REMOTE OUT AUX1
(White/Brown)
3
4
To remote input lead.
REMOTE OUT AUX2
:
(White/Brown)
FOOT BRAKE
To the foot brake cord or brake
lamp cord.
(Yellow/Black)
5
6 Ai-NET
7
8
9
ILLUMINATION
To the instrument cluster
illumination lead.
NORM
EQ/DIV
(Orange)
REMOTE TURN-ON
(Blue/White)
To amplifier or equalizer.
To power antenna.
POWER ANT
(Blue)
!
"
AUDIO INTERRUPT IN
To vehicle phone.
(Pink/Black)
PARKING BRAKE
To the parking brake signal lead.
(Yellow/Blue)
IGNITION
#
$
(Red)
%
Ignition key
BATTERY
(Yellow)
GND
&
(Black)
Battery
(
)
(Gray)
SPEAKER
RIGHT
FRONT
(Gray/Black)
Front right
(Violet/Black)
(Violet)
~
+
SPEAKER
RIGHT
REAR
Rear right
Speakers
(Green)
,
-
SPEAKER
LEFT
REAR
(Green/Black)
Rear left
(White/Black)
(White)
.
/
SPEAKER
LEFT
FRONT
Front left
48-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
1 Antenna Receptacle
! Audio Interrupt In Lead (Pink/Black)
2 Remote Control Interface Connector
Connect to the remote control interface box.
3 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
" Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the
parking brake switch to transmit the parking brake
status signals to the CVA-1003.
# Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s
fuse box or another unused power source which
provides (+) 12V only when the ignition is turned on
or in the accessory position.
4 Foot Brake Lead
Connect to the vehicle’s foot brake lead or brake lamp
lead.
5 Power Supply Connector
$ Battery Lead (Yellow)
6 System Switch
Connect this lead to the positive (+) post of the
vehicle’s battery.
% Fuse Holder (15A)
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
& Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
7 Illumination Lead (Orange)
( Right Front (+) Speaker Output Lead (Gray)
) Right Front (–) Speaker Output Lead (Gray/
Black)
~ Right Rear (–) Speaker Output Lead (Violet/
Black)
This lead may be connected to the vehicle’s
instrument cluster illumination lead. This will allow
the backlighting of the CVA-1003 to dim whenever
the vehicle‘s lights are turned on.
+ Right Rear (+) Speaker Output Lead (Violet)
, Left Rear (+) Speaker Output Lead (Green)
- Left Rear (–) Speaker Output Lead (Green/
Black)
. Left Front (–) Speaker Output Lead (White/Black)
/ Left Front (+) Speaker Output Lead (White)
: RGB input Connector
8 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
9 Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power
antenna, if applicable.
49-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
System Example 1: Refer also to Basic Connections.
Speakers
2
1
Rear or
Subwoofers∗
Amplifier
(NVE-N852A/NVE-N871A)
"
3
Navigation System
(Sold Separately)
6
Ai-NET
4
5
NORM
EQ/DIV
!
(Yellow)
7
8
(Yellow)
(White)
(Red)
DVD Video Player
(Sold Separately)
REMOTE IN
REMOTE OUT AUX1
(White/Brown)
(White/Brown)
9
CD Changer (Ai-NET)
(Sold Separatery)
#
∗ When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer Control On and OFF" on page 38.
When connecting the DVD changer
REMOTE IN
REMOTE OUT AUX1
(White/Brown)
(White/Brown)
9
4
6
$
%
Ai-NET
DVD Changer
(Sold Separately)
NORM
EQ/DIV
7
To VIDEO OUT terminal
(Yellow)
#
CD Changer
(Sold Separately)
50-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
To"
When connecting with NVA-N751AS of the Alpine's Navigation System.
(Yellow/Red)
(White/Green)
(White/Brown)
DISPLAY CONTROL IN
(Yellow/Red)
GUIDE CONTROL OUT
(White/Green)
REMOTE IN
(White/Brown)
(NVA-N751AS)
Navigation Unit
(Sold Separately)
&
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
8 AUX Audio Input (AUX1) Connectors
(not used for this system)
2 RCA Extension Cable (Sold Separetely)
3 RGB Cable (Included with NVE-N852, not
included with NVE-N871A)
9 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
4 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
! RCA Extension Cable (Included with DVD video
player)
5 Ai-NET Cable (Included with DVD video player)
6 System Switch
" RGB Input Connector
Connect to the RGB output terminal of the navigation
system.
# Ai-NET Cable (Included with CD Changer)
$ Ai-NET Cable (Included with DVD Changer)
% RCA Extension Cable (Included with DVD
Changer)
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
& RGB Convertor Cable (KWE-503N) (Sold
Separately)
Be sure turn the power off to the unit before changing the
switch position.
7 AUX Video Input (AUX1) Connector
Connect the video output lead of a DVD video player
or DVD changer to this terminal.
51-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
System Example 2 (connecting to KCE-103V (Optional)):
Refer also to Basic Connections.
CD Changer (Ai-NET)
(Sold Separately)
5
Speakers
Rear or
1
2
Amplifier
Subwoofer∗
3
6
4
REMOTE IN
REMOTE OUT AUX 1
(White/Brown)
(White/Brown)
(Yellow)
7
DVD Video Player
(Sold Separately)
(White: L-ch)
(Red: R-ch)
1
8
6
(Blue/White)
(Blue/White)
REMOTE
REMOTETURN-ON
REMOTE IN
REMOTE OUT AUX 2
9
(White/Brown)
(White/Brown)
%
GND
(Black)
(
-
(Red)
(Yellow)
(White)
(Red)
(White)
(Yellow)
Extension
Box
"
Ai-NET
KCE-103V
(Sold
Separately)
(Yellow)
(White)
(Red)
(Red)
!
NORM
EQ/DIV
&
(White)
(Yellow)
,
)
~
;
+
:
.
(Red)
1
/
#
$
(White)
(Yellow)
KCE-150V
(Sold Separately)
TV Tuner
Rear Monitor
(Sold Separately)
(Sold Separately)
Navigation System
(Sold Separately)
COLOR
CONTROL
∗∗
ON
OFF
(NVE-N852A/NVE-871A)
(TME-M750A)
∗
When Subwoofer is set to OFF: Output is from Rear speakers.
When Subwoofer is set to ON: Output is from Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see "Subwoofer Control On and OFF" on page 38.
*5*2Set the color control of TV Tuner to OFF.
-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connections
1 RCA Extension Cable (Sold Separetely)
2 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
# AUX Audio Input (AUX1) Connectors
$ AUX Video Input (AUX1) Connector
% Ground Lead (Black)
Connect this lead to a good chassis ground on the
vehicle. Make sure the connection is made to bare
metal and is securely fastened using the sheet metal
screw provided.
3 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
4 Ai-NET Cable (Included with DVD video player)
5 Ai-NET Cable (Included with CD Changer)
6 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
7 RCA Extension Cable (Included with DVD video
player)
8 Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
9 Power Supply Connector
! RGB Input Connector
Connect to the RGB output terminal of the KCE-
103V.
" System Switch
& RCA Extension Cable (Included with KCE-103V)
( Connect to the AUX Input (AUX1) Connecters of
the CVA-1003
) To AUX Output Terminals of the KCE-103V
~ Connect to the RGB Terminal of the Navigation
System
+ Connect to the RGB Input Terminal of the CVA-
1003
, To AUX Input1 Terminals of the KCE-103V
- To AUX Input2 Terminals of the KCE-103V
. To Video Output Terminals
/ RGB Cable (Included with NVE-N852, not
included with NVE-N871A)
: RGB Cable (Included with KCE-103V)
; RCA Extension Cable (Included with KCE-150V)
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
53-EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|