Alpine Car Stereo System CDA 7846E User Manual

R
CDA-7846E  
FM/AM Compact Disc Receiver  
• OWNER'S MANUAL (page 2- page 55)  
Please read this manual to maximize your  
enjoyment of the outstanding performance and  
feature capabilities of the equipment, then retain  
the manual for future reference.  
RLS  
DISC TITLE MEMORY  
DISC-IN  
OPEN  
INTLZ  
PWR  
CD RECEIVER 40Wx4  
CDA-7846E  
MAX  
CHG  
MIN.  
MODE  
LOUD  
BAND  
T.S.M.  
SOURCE  
DEMO  
FUNC  
F1  
F2  
F3 ALL  
F4 ALL  
F5  
F6  
DX SEEK  
ST LOUD  
DN  
DN  
7
1
UP  
UP  
8
2
M.I.X.  
9
RPT 10  
SCAN 11  
T.RCL  
MUTE 12  
MUTE  
D.A.P.  
3
MONO  
4
5
6
CLK  
TITLE  
CT  
F4  
H
M
TUNE  
A. ME  
DN  
UP  
FUNC  
F1  
F2  
F3  
F5  
F6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Conte nts  
Page  
4 .......................................................................................... Precautions  
7 ...................................................................... Detachable Front Panel  
Basic Operation  
8 ........................................................................... Initial System Start-up  
9 .................................................................... Turning Power On and Off  
9 ...................................................................... Turning Loudness On/Off  
10 ........................................................................ Subwoofer On and Off  
11 ............................................ Non Fading Pre-Out (N.F.P.) On and Off  
12 .................................... Adjusting Volume/Bass/Treble/Balance/Fader  
13 ........................................................................... Audio Mute Function  
13 ............................................................. Sound (Beep) Guide Function  
14 .................................................................. Adjusting Display Contrast  
15 ................................................................. Turning Mute Mode On/Off  
16 ..................................................................................... Demonstration  
17 ................................................................................... Displaying Time  
18 ........................................................................................ Setting Time  
19 ................................................................... Using the Function Button  
Radio Operation  
20 .................................................................................... Manual Tuning  
21 ....................................................................... Automatic Seek Tuning  
22 ....................................................... Manual Storing of Station Presets  
23 ................................................. Automatic Memory of Station Presets  
24 ................................ Storing into Direct Access Preset (D.A.P.) Band  
25 .................................................................... Tuning to Preset Stations  
26 ...................................................................... Displaying Station Titles  
27 ..................................................................................... Titling Stations  
29 ................. Displaying Station Signal Strength [T.RCL (Tuner Recall)]  
29 ....................................................................... Mono/Stereo Switching  
CD Operation  
30 ...................................................................................... Inserting Disc  
31 .................................................................................... Removing Disc  
32 ...................................................................... Normal Play and Pause  
33 ............................................................................ Music Sensor (Skip)  
34 ............................................................... Fast Forward and Backward  
34 ......................................................................................... Repeat Play  
35 .......................................................................... M.I.X. (Random Play)  
36 ............................................................................. Scanning Programs  
37 ........................................................................... To Display CD Titles  
38 ........................................................................................... Titling Disc  
40 ................................................................................ Erasing Disc Title  
CD Shuttle Operation  
41 ........................................................ Controlling CD Shuttle (Optional)  
43 ........................................ Searching Titled Discs (Title Search Menu)  
44 ...................................................................... Multi-Changer Selection  
46 ................................................................................. Remote Control  
49 ............................................................................................ Disc Care  
50 ........................................................................... In Case of Difficulty  
54 .................................................................................... Specifications  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Pre c a utions  
The rm a l  
Be sure the temperature inside the vehicle is  
between +60°C (+140°F) and –10°C (+14°F)  
before turning your unit on.  
+60°C  
–10°C  
Moisture Cond e nsa tion  
You may notice the CD playback sound  
wavering due to condensation. If this happens,  
remove the disc from the player and wait about  
an hour for the moisture to evaporate.  
Da m a g e d Disc  
Do not attempt to play cracked, warped, or  
damaged discs. Playing a bad disc could  
severely damage the playback mechanism.  
Ne ve r Atte m p t the Following  
Do not grip or pull out the disc while it is being  
pulled back into the player by the automatic  
reloading mechanism.  
Do not attempt to insert a disc into the unit  
when the unit power is off.  
Ma inte na nc e  
If you have problems, do not attempt to repair  
the unit yourself. Return it to your Alpine dealer  
or the nearest Alpine Service Station for  
servicing.  
Irre g ula r Sha p e d Disc s  
Make sure the discs you use in this unit do not  
have any irregularities. The outer and inner  
edges should be round and smooth. Use of  
irregularly shaped discs may cause damage to  
the mechanism.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Pre c a utions  
Inse rting Disc s  
Your player accepts only one disc at a time for  
playback. Do not attempt to load more than one  
disc.  
Make sure the label side is facing up when you  
insert the disc. Your player will automatically  
eject any disc that is inserted incorrectly. If the  
player continues to eject a correctly inserted  
disc, push the Reset switch (located behind the  
detachable front panel) with a pointed object  
such as a ball-point pen.  
Playing a disc while driving on a very bumpy  
road may result in skips, but this will not scratch  
the disc or damage the player.  
Ne w Disc s  
As a protective measure, the CD player will  
automatically eject discs that have either been  
inserted incorrectly or have irregular surfaces. If  
a new disc is ejected immediately after loading,  
use your finger to feel around the outer edge of  
the CD and its center hole. If you feel any small  
bumps or irregularities, this could inhibit proper  
loading of the disc. To remove the bumps, rub  
the inside edge of the hole and outside edge of  
the disc with a ball-point pen or other such  
instrument, then insert the disc again.  
Center Hole  
Bumps  
Center Hole  
New Disc  
Outside (Bumps)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Pre c a utions  
Insta lla tion Loc a tion  
Make sure the CDA-7846E player/receiver will  
not be exposed to:  
Direct sun and heat  
High humidity  
Excessive dust  
Excessive vibrations  
Ha nd ling the De ta c ha b le  
Front Pa ne l  
Do not expose to rain or water.  
Do not drop or apply shock.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
De ta c ha b le Front  
Pa ne l  
De ta c hing the Front Pa ne l  
Press the PWR (Power) button to turn off the  
power.  
INTLZ  
PWR  
1
2
3
Press the RLS (release) button until the front  
panel pops out.  
RLS  
Grasp the left side of the front panel and pull it  
out.  
Notes:  
The front panel may become hot  
(especially the connector terminals), this  
is not malfunction.  
To protect the front panel, place it in the  
supplied carrying case.  
Atta c hing the Front Pa ne l  
1. First, insert the right side of the front panel  
into the main unit. Align the 2 small holes on  
the front panel with the 2 projections on the  
main unit.  
2. Push the left side of the front panel until it  
locks firmly into the main unit.  
1
Note: Before attaching the front panel, make  
sure that there is no dirt or dust on the  
connector terminals and no foreign  
objects between the front panel and main  
unit.  
2
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Initia l Syste m Sta rt-Up  
When operating the unit for the first time after  
installation or after the vehicle's battery has  
been disconnected and reconnected, set the  
volume level to its minimum, then remove the  
detachable front panel. (Refer to page 7.)  
1
2
Press the button with a ball-point pen or any  
other pointed object. The plate opens  
automatically.  
There is a small hole at the lower right side.  
Behind this hole the red Reset switch is located.  
Press the Reset switch with a ball-point pen or  
any other pointed object.  
3
Push the plate to close it until a click sound is  
produced.  
4
5
Attach the front panel (see page 7).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Turning Powe r On a nd Off  
Press the PWR button to turn off the unit.  
INTLZ  
PWR  
1
The volume level gradually increases to the  
previous level you were listening to before the  
unit was turned off. Press the PWR button  
again to turn off the unit.  
Turning Loud ne ss On/ Off  
Loudness introduces a special low- and high-  
frequency emphasis at low listening levels. This  
compensates for the ear's decreased sensitivity  
to bass and treble sound.  
Press and hold the LOUD button for at least 2  
seconds to activate or deactivate the loudness  
mode.  
1
MODE  
LOUD  
LOUD  
The display shows "LOUD" when the loudness  
mode is activated.  
Note: Depending on the device connected to  
the CDA-7846E, not all functions or  
display indications will operate as  
described. For details, consult your  
Alpine dealer.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Sub woofe r On a nd Off  
Change the setting when an optional product  
having the Subwoofer output terminals is Ai-  
NET connected.  
Press and hold the PWR button for at least 3  
seconds.  
INTLZ  
PWR  
1
2
Press the F1 button repeatedly to select  
"SUBW.". With each press, subwoofer is  
toggled ON or OFF.  
F1  
SUBW  
ON  
SUBW OFF  
When the subwoofer is ON:  
Press the MODE button for at least 2 seconds  
repeatedly, and the subwoofer output phase is  
toggled 0° or 180°.  
Press the PWR button, after setting the  
subwoofer ON.  
INTLZ  
PWR  
3
4
Press the MODE button repeatedly to select the  
subwoofer mode.  
MODE  
LOUD  
VOLUME  
BALANCE  
FADER  
Subwoofer  
Press the  
or  
button to adjust the  
SW 15  
5
subwoofer output level.  
The setting is displayed for 5 seconds and then  
memorized.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Non Fa d ing Pre -Out  
(N.F.P.) On a nd Off  
Press and hold the PWR button for at least 2  
seconds.  
INTLZ  
PWR  
1
2
Press the F1 button.  
With each press, N.F.P. is toggled On or Off.  
F1  
N.F.P. ON  
N.F.P. OFF  
N.F.P. ON: In this position, the Front Pre-  
Output will not be affected by the  
fader. This is ideal for driving a  
subwoofer amplifier.  
N.F.P. OFF:Returns to normal fader mode.  
Note: Set the N.F.P. to OFF unless the  
subwoofer is used.  
INTLZ  
PWR  
Press the PWR button to set the selected  
mode.  
3
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Ad justing Volum e / Ba ss/  
Tre b le / Ba la nc e / Fa d e r  
Press the MODE/LOUD button repeatedly to  
choose the desired mode.  
1
2
VOLUME  
BASS  
Notes:  
MODE  
LOUD  
If the  
or  
button is not pressed in 5  
seconds after selecting the BASS,  
TREBLE, BALANCE and FADER modes,  
the unit automatically returns to the VOL  
mode.  
TREBLE  
BALANCE  
FADER  
With the subwoofer mode turned on, the  
subwoofer output level can be adjusted.  
Press the button  
or  
until the desired  
sound is obtained in each mode.  
Note: The BASS and TREBLE settings for  
each source (FM, AM and CD) are  
automatically memorized. These  
settings remain until you manually  
change them.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Aud io Mute Func tion  
Activating this function will instantly lower the  
volume level by 20 dB.  
Press the F6 button to activate the MUTE  
mode. The volume bar graphic indicator will  
flash in the display and the audio level will  
decrease by about 20 dB.  
1
(ON)  
F6  
F6  
MUTE  
Pressing the F6 button again will bring the  
audio back to its previous level and the display  
will return to normal.  
F6  
(OFF)  
MUTE  
In the CD mode, press the F6 button when the  
FUNC indicator is off.  
Sound (Be e p ) Guid e Func -  
tion  
This function will give audible feedback with  
varying tones depending upon the button  
pressed.  
INTLZ  
PWR  
Press and hold the PWR button for more than 2  
seconds.  
1
2
With each press of the F2 button, BEEP is  
toggled ON or OFF.  
BEEP  
BEEP  
ON  
F2  
OFF  
INTLZ  
PWR  
Press the PWR button to set the selected  
mode.  
3
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Ad justing Disp la y Contra st  
You can adjust the display contrast for better  
visibility.  
INTLZ  
PWR  
Press and hold the PWR button for at least 2  
seconds.  
1
Press the F3 button. The "CONTRAST" is  
displayed.  
F3  
2
3
Press the  
or  
button to adjust the contrast  
CONTRAST 0  
of the display. You can adjust in a range of –6  
and +6.  
The initial setting at the factory is "0".  
DN  
UP  
INTLZ  
PWR  
Press the PWR button to set the selected  
mode.  
4
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Turning Mute Mod e On/ Off  
With a cellular phone or navigation system  
connected, audio will be interrupted whenever a  
call is received. This function can be manually  
turned ON or OFF from the head unit by  
following procedure below.  
INTLZ  
PWR  
Press and hold the PWR button for at least 2  
seconds.  
1
2
With each press of the F4 button, the MUTE is  
toggled ON or OFF.  
F4  
MUTE ON  
MUTE OFF  
Press the PWR button again to return to normal  
operation.  
INTLZ  
PWR  
3
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
De m onstra tion  
In the Demonstration (DEMO) mode, the unit  
scans each function of the sources; Tuner, CD  
player and CD shuttle if an optional CD Shuttle  
is connected.  
Press the DEMO button to activate the DEMO  
mode.  
The DEMO mode is activated and the unit  
automatically performs the operation.  
1
2
DEMO  
To end the DEMO mode, press the DEMO  
button.  
DEMO  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Disp la ying Tim e  
Press the CLK (CLOCK) button to display the  
time. The unit displays the time.  
1
2
CLK  
12:00  
TITLE  
Note: Selecting any tuner or CD function while  
in the Clock mode will interrupt the time  
display momentarily. The function  
selected will be displayed for about 5  
seconds before the time returns to the  
display.  
Press the CLK (CLOCK) button to turn off the  
time and to show other functions.  
CLK  
TITLE  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Se tting Tim e  
Press the CLK (CLOCK) button to display the  
time.  
CLK  
1
2
TITLE  
12:00  
12:30  
Note: If the power to the unit is off, turn the  
power.  
Press and hold the CLK (CLOCK) button for at  
least 2 seconds. The time indication will begin  
to blink.  
CLK  
TITLE  
Press the F4 button while the time indication is  
blinking to set seconds to "0".  
F4  
3
4
12:00  
9:00  
Example: To adjust to 9:35  
F5  
Press the F5 button to adjust the hours while  
the time indication is blinking.  
Press the F6 button to adjust the minutes while  
the time indication is blinking. The time  
indication will stop blinking 5 seconds after the  
last adjustment. The time will automatically be  
set.  
5
F6  
9:35  
9:35  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ba sic Ope ra tion English  
Using the Func tion Button  
The chart below describes the function of each  
preset button. The function will change  
depending upon the source selected and the  
condition of the FUNCTION switch, ON or  
OFF.  
FUNC  
Press the FUNC (FUNCTION) button. The  
function mode will change each time you press  
the button. (Refer to the chart below.)  
1
2
F6  
F1  
Press any one of the  
buttons.  
F1  
F2  
F3  
F4  
F5  
F6  
Function  
indicator  
(on/ off)  
F1  
F2  
F3  
F4  
F5  
F6  
Mode  
Radio  
Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 Preset 6  
P–DN  
(Preset DOWN) (Preset UP)  
P–UP  
D.A.P.  
MONO  
T.RCL  
(Tuner Recall)  
MUTE  
FUNC  
(Direct Access (Stereo/Monaural)  
Memory Preset)  
M.I.X.  
RPT  
SCAN  
MUTE  
(Randam Play)  
(Repeat)  
CD  
Disc Select 1 Disc Select 2 Disc Select 3 Disc Select 4 Disc Select 5 Disc Select 6  
6-CD  
Changer  
D–DN  
D–UP  
M.I.X.  
RPT  
SCAN  
MUTE  
FUNC  
FUNC  
(Randam Play)  
(Repeat)  
(Disc DOWN)  
(Disc UP)  
Disc Select 1 Disc Select 2 Disc Select 3 Disc Select 4 Disc Select 5 Disc Select 6  
Disc Select 7 Disc Select 8 Disc Select 9 Disc Select 10 Disc Select 11Disc Select 12  
12-CD  
Changer  
D–DN  
D–UP  
M.I.X.  
RPT  
SCAN  
MUTE  
(Disc DOWN)  
(Disc UP)  
(Randam Play)  
(Repeat)  
Time Signal  
Adjust-  
ment  
Minute  
Adjust-  
ment  
Hour  
Adjustment  
(HOUR)  
Clock  
Adjust-  
ment  
(CT)  
(MIN)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ma nua l Tuning  
Press the SOURCE button to select the radio  
mode.  
1
2
SOURCE  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
BAND  
T.S.M.  
FM1  
FM2  
AM  
Press the TUNE button repeatedly until  
"MANUAL" appears in the display.  
3
4
DX SEEK  
TUNE  
A. ME  
Note: The initial mode is DX SEEK.  
LOCAL SEEK  
MANUAL  
Press the ( ) DN or UP ( ) button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
F1  
82.5  
DN  
UP  
Note: The "ST" indicator appears on the display  
when a Stereo FM station is tuned in. If  
the stereo FM signal becomes weak, the  
"ST" indicator disappears and the unit  
automatically switches the mode from  
stereo to monaural to reduce the noise.  
When the signal becomes strong  
enough, the unit automatically switches  
back to the stereo mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ré c e p tion  
ra d io  
Autom a tic Se e k Tuning  
Press the SOURCE button to select the radio  
mode.  
1
SOURCE  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
2
3
FM1  
FM2  
AM  
BAND  
T.S.M.  
Press the TUNE button to illuminate the DX and  
SEEK indicators in the display. With the DX  
mode activated, both strong and weak stations  
will be tuned automatically.  
TUNE  
A. ME  
DX SEEK  
LOCAL SEEK  
Press again to return to the local mode. The DX  
indicator will turn off and only the SEEK  
indicator will remain illuminated. Now only  
strong stations will be tuned.  
MANUAL  
Press the ( ) DN or UP ( ) button to  
automatically seek a station downward or  
upward respectively.  
The unit will stop at the next station it finds.  
Press the same button again to seek next  
station.  
F1  
82.5  
4
DN  
UP  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ma nua l Storing of Sta tion  
Pre se ts  
1. Tune in the desired radio station you wish to  
store in the preset memory.  
1
2. Check that the "FUNC" indicator is off.  
3. Press and hold any one of the preset  
buttons (1 through 6) for at least 2 seconds.  
The frequency display will begin to blink.  
4. Press the preset button into which you wish  
to store the station while the display is  
blinking (within 5 seconds).  
F1  
F2  
F3  
F4  
F5  
F6  
The display stops blinking to indicate that  
the station has been memorized. The preset  
number is also displayed.  
5. Repeat the procedure to store 5 other  
stations onto the same band. Use this  
procedure for other bands.  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
AM and D.A.P.).  
Note: If a preset memory has already been set  
in the same preset location, it will be  
cleared and the new station will be  
memorized.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ré c e p tion  
ra d io  
Autom a tic Me m ory of  
Sta tion Pre se ts  
Press the SOURCE button to select the radio  
mode.  
1
SOURCE  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
2
3
FM1  
FM2  
AM  
BAND  
T.S.M.  
Press and hold the A. ME button for at least 2  
seconds. The frequency on the display  
continues to change while the automatic  
memory is in progress.  
TUNE  
A. ME  
The tuner will automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
When the automatic memory has been  
completed, the tuner goes to the station stored  
in the preset location F1.  
Note: If no stations are stored, the tuner will  
return to the original station you were  
listening to before the auto memory  
procedure began.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Storing into Dire c t Ac c e ss  
Pre se t (D.A.P.) Ba nd  
A combination of radio stations in any band, AM  
and FM (up to 6 stations) can be manually  
preset onto the D.A.P. band.  
Press the F3 button when the "FUNC" indicator  
is on.  
1
F3  
(OFF)  
(ON)  
F3  
D.A.P.  
Press the BAND button to select FM or AM.  
The selected band will be displayed.  
To memorize stations onto the D.A.P. band,  
follow the steps for the automatic or Manual  
Storing of Station Presets section above.  
F3  
D.A.P.  
Note: When Automatic Memory Preset is used  
with D.A.P., 4 FM and 2 AM stations will  
be stored in Presets 1 – 4 and 5 – 6  
respectively.  
To cancel the D.A.P. mode, press the F3  
button. The red line above the D.A.P. indicator  
will turn off.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ré c e p tion  
ra d io  
Tuning to Pre se t Sta tions  
Press the SOURCE button to select the radio  
mode.  
1
SOURCE  
Press the BAND button repeatedly until the  
desired band is displayed.  
2
FM1  
FM2  
AM  
BAND  
T.S.M.  
To select the D.A.P. band, press the F3 button  
with the "FUNC" indicator on.  
F3  
D.A.P.  
Press the station preset button that has your  
desired radio station in memory. The display  
shows the band, preset number with a triangle  
and frequency of the station selected.  
F1 2  
82.5  
3
F1  
F2  
F3  
F4  
F5  
F6  
Note: When the "FUNC" indicator is on,  
pressing the F1 or F2 button can select  
the stations.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Disp la ying Sta tion Title s  
If a title has been entered for the selected  
station, it can be displayed in place of the  
frequency. The display will toggle between the  
frequency and title display with each press of  
the TITLE button.  
1
CLK  
TITLE  
(Refer to page 27 to title stations.)  
NORMAL Mode  
90.1  
CLOCK PRIORITY Mode  
STATION TITLE Mode  
12:58  
ALPINE  
Title entered  
Title not entered  
Characters and Symbols  
A (a)  
K (k)  
U (u)  
4
B (b)  
L (l)  
V (v)  
5
C (c)  
M (m)  
W (w)  
6
D (d)  
N (n)  
X (x)  
7
E (e)  
O (o)  
Y (y)  
8
F (f)  
P (p)  
Z (z)  
9
G (g)  
H (h)  
I (i)  
S (s)  
2
J (j)  
T (t)  
3
Q (q)  
R (r)  
0
!
1
"
#
$
%
&
(
)
+
?
,
-
.
*
>
/
:
;
<
=
Blank  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ré c e p tion  
ra d io  
Titling Sta tions  
Tune in a station to be titled.  
1
Change to the TITLE mode. Press and hold the  
TITLE button for at least 2 seconds. The first  
digit will blink.  
CLK  
2
3
4
TITLE  
or  
BLPINE  
Press FUNC button to select the desired mode.  
It will change each time you press the button.  
Refer to “Character and Symbols” on page 26.  
FUNC  
A
0
!
Alphabet Number Symbol  
Press the  
DN or UP  
button to select the  
desired letter/numeral/symbol available for  
naming ("A" for example).  
A
or  
DN  
UP  
ALPINE  
If entering a letter (alphabet), press the F1  
button to change to lowercase. Press the F2  
button to return to all caps mode.  
F1  
F2  
a
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Titling Sta tions (Continue d )  
Press the TITLE button to store the first  
character. The first character will stop blinking  
and the display will automatically advance to  
the next character. When that character begins  
to blink, you may choose the next letter or  
symbol of your title.  
5
6
7
CLK  
A
TITLE  
or  
ALPINE  
Repeat the steps  
above to complete the  
titling. All 10 character positions should be  
filled. Use spaces where characters are not  
needed (for example at the end of a 5 character  
title, use 5 spaces to complete the title).  
After the last character has been entered  
(character number 10), the title will automati-  
cally be stored.  
Notes:  
You can not enter a title on clock mode.  
Refer to "Displaying Time".  
When you want to erase a title, enter the  
"
" symbol into all spaces.  
When the title memory is used up, the  
display shows "Full Data." Storing new  
station titles after the "Full Data" message  
has been displayed, causes previously  
stored titles to be erased. The new station  
titles will replace the old titles beginning with  
the first one created.  
A total of 24 titles for AM and FM stations  
may be entered.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ra dio Ope ra tionEnglish  
Ré c e p tion  
ra d io  
Disp la ying Sta tion Sig na l  
Stre ng th [T.RCL (Tune r Re -  
c a ll)]  
You can display the signal strength of a desired  
radio station while you are listening to other  
sources such as CD player or CD Shuttle.  
When the "FUNC" indicator is on, press the F5  
button in the Tuner mode. The display shows  
the bar-graphic signal strength of the selected  
radio station.  
To cancel the T.RCL mode, press the F5 button  
again.  
1
(ON)  
F5  
F5  
T.RCL  
(OFF)  
F5  
T.RCL  
Note: If you use a power antenna, extend the  
antenna during the T.RCL mode.  
Mono/ Ste re o Switc hing  
"ST" indicator appears when a stereo is tuned  
in.  
1
F4  
(OFF)  
(ON)  
F4  
MONO  
F4  
When the "FUNC" indicator is on, press the F4  
button to switch from stereo to monaural FM  
reception. This will help in reducing the noise of  
weak FM Stereo broadcasts. In the monaural  
mode, the "ST" indicator disappears. Press the  
F4 button again to return to the stereo mode.  
MONO  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Inse rting Disc  
Note: When a CD is located in the CD player,  
the "DISC IN" indicator illuminates.  
Press the OPEN button to open the front door.  
The CD compartment is located behind the  
front door.  
OPEN  
1
2
Insert a CD half way into the slot with the label  
side facing up. The player automatically draws  
the disc into the disc compartment. When the  
CD is loaded, the player automatically starts CD  
playback and DISC-IN indicator lights up.  
Close the front door with your hand until you  
hear a click sound.  
3
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Re m oving Disc  
Press the OPEN button to open the front door.  
1
2
OPEN  
Press the Eject ( ) button on the top side of the  
front door.  
The CD is automatically ejected half way out.  
Remove the CD with your hand.  
Note: If the CD is not removed for several  
seconds, the player automatically draws  
the CD into the compartment to protect  
the CD.  
Close the front door with your hand until you  
hear a click sound.  
3
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Norm a l Pla y a nd Pa use  
Insert a CD into the CD player. The CD player  
begins playback from the first track on the disc.  
The display shows the track number and  
elasped time of the track being played. When  
the last track is played back the player returns  
to the first track and begins playback from that  
point.  
1
If a CD is already loaded in the CD player,  
press the SOURCE button to select the CD  
mode.  
2
3
TUNER  
CD  
SOURCE  
Note:  
*
The source indicator varies depending on  
the connected source.  
CHANGER*  
Press the  
(Play/Pause) button during the  
TUNE  
A. ME  
play mode to place the player in the Pause  
mode. "PAUSE" appears in the display.  
To resume playback, press the  
again.  
button  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Music Se nsor (Skip )  
Momentarily press the ( ) DN button once to  
return to the beginning of the current track. If  
you wish to access a track further back,  
repeatedly press until you reach the desired  
track. (The example shows the Music Sensor  
operation starting from track No. 4.)  
1
CD T04  
CD T04  
CD T03  
DN  
Press the UP ( ) button once to advance to  
the beginning of the next track. If you wish to  
access a track further ahead, press repeatedly  
until the desired track is reached.  
UP  
CD T04  
CD T05  
Note: The music sensor feature is functional in  
the play or pause mode.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Fa st Forwa rd a nd Ba c k-  
wa rd  
Press and hold the ( ) DN or UP ( ) button to  
quickly move backward or forward until you  
reach the desired section of the track.  
DN  
UP  
1
1
Re p e a t Pla y  
Press the F4 button to play back repeatedly the  
track being played. The RPT indicator appears  
and the track will be played repeatedly.  
F4  
Press the F4 button again to deactivate the  
repeat play.  
Note:  
*
If a CD Shuttle is connected and the RPT  
ALL mode is selected, the unit repeatedly  
plays back all tracks on the disc selected.  
(OFF)  
F4  
RPT  
(1 track repeat)  
F4  
Notes:  
RPT  
In case of 6-disc CD Shuttle connected:  
(*All tracks repeat)  
F4 ALL  
Press the "FUNC" button to illuminate the  
"FUNC" (Function) indicator and go to  
RPT  
step  
In case of 12-disc CD Shuttle connected:  
Press the "FUNC" button twice to illuminate  
the "FUNC" indicator and go to step  
.
.
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
M.I.X. (Ra nd om Pla y)  
Press the F3 button in the play or pause mode.  
The M.I.X. indicator will illuminate and the  
tracks on the disc will be played back in a  
random sequence. After all the tracks on the  
disc have been played back once, the player  
will begin a new random sequence play until  
the M.I.X. mode is canceled.  
1
F3  
(OFF)  
F3  
M.I.X.  
F3  
M.I.X.  
To cancel M.I.X. play, press the F3 button  
again.  
Note: If a CD Changer equipped with the M.I.X.  
F3 ALL  
ALL function is connected, "  
will be displayed.  
"
RPT  
Notes:  
In case of 6-disc CD Shuttle connected:  
Press the "FUNC" button to illuminate the  
"FUNC" (Function) indicator and go to  
step  
In case of 12-disc CD Shuttle connected:  
Press the "FUNC" button twice to illuminate  
the "FUNC" indicator and go to step  
.
.
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Sc a nning Prog ra m s  
Press the F5 button to activate the Scan mode.  
The first 10 seconds of each track will be  
played back in succession.  
1
2
(OFF)  
(ON)  
F5  
F5  
SCAN  
F5  
To stop the Scan, press the F5 button to  
deactivate the Scan mode.  
SCAN  
Notes:  
In case of 6-disc CD Shuttle connected:  
Press the "FUNC" button to illuminate the  
"FUNC" (Function) indicator and go to  
step  
In case of 12-disc CD Shuttle connected:  
Press the "FUNC" button twice to illuminate  
the "FUNC" indicator and go to step  
.
.
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
To Disp la y CD Title s  
After a title has been entered for a CD, it can be  
displayed by pressing the TITLE button. The  
display will toggle between Normal, Clock and  
CD Title with each press of the TITLE button  
(see example below). (Refer to page 38 to title  
the disc.)  
1
CLK  
TITLE  
NORMAL Mode  
T08  
11'03  
12:58  
CLOCK PRIORITY Mode  
CD TITLE Mode  
T08  
ALPINE  
Title entered  
Title not entered  
Characters and Symbols  
A (a)  
K (k)  
U (u)  
4
B (b)  
L (l)  
V (v)  
5
C (c)  
M (m)  
W (w)  
6
D (d)  
N (n)  
X (x)  
7
E (e)  
O (o)  
Y (y)  
8
F (f)  
P (p)  
Z (z)  
9
G (g)  
H (h)  
I (i)  
S (s)  
2
J (j)  
T (t)  
3
Q (q)  
R (r)  
0
!
1
"
#
$
%
&
(
)
+
?
,
-
.
*
>
/
:
;
<
=
Blank  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Titling Disc  
Select a disc for which you want to enter a title.  
1
2
CLK  
Change to the TITLE mode. Press and hold the  
TITLE button for at least 2 seconds. The first  
digit will blink.  
TITLE  
or  
BLPINE  
Press the FUNC button to select the desired  
mode.  
The mode will change each time you press the  
button. Refer to “Characters and Symbols” on  
page 37.  
FUNC  
3
4
A
0
!
Alphabet Number Symbol  
Press the  
DN or UP  
button to select the  
desired letter/numeral/symbol available for  
naming ("A" for example).  
DN  
UP  
If entering a letter (alphabet), press the F1  
button to change to lower case. Press the F2  
button to return to all caps mode.  
F1  
F2  
a
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Titling Disc (Continue d )  
Press the TITLE button to store the first  
character. The first character will stop blinking  
and the display will automatically advance to  
the next character. When that character begins  
to blink, you may choose the next letter or  
symbol of your title.  
CLK  
TITLE  
5
6
AL  
Repeat the steps  
above to complete the  
titling. Pressing the TITLE button after entering  
the 12th character, automatically stores the title  
into memory.  
In case of storing a title of less than 12  
characters:  
For example, after 3rd digit character is  
completed, 4th digit character is blinking. Then,  
go to step  
.
Press and hold the TITLE button for at least 2  
seconds to record the title.  
Notes:  
CLK  
7
TITLE  
You can not enter a title in clock mode. For  
the clock display, refer to “Displaying Time”,  
on page 17.  
When the display shows "Full Data", the  
memory is full and no input is accepted. In  
order to input new titles, old titles must be  
deleted first. Refer to the section "Erasing  
Disc Title" on page 40 to delete titles.  
To erase the title name in the CD mode,  
select (Blank) in the table <Characters and  
Symbols> on page 37 and enter as de-  
scribed in the operating procedures above.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Op e ra tion  
Era sing Disc Title  
CLK  
Press the TITLE button to select the disc titling  
mode. Then, press and hold for at least 2  
seconds.  
TITLE  
1
2
Press and hold the FUNC button for at least 2  
seconds to activate the title scanning mode.  
The title in the display will blink, for example  
"ALPINE".  
FUNC  
ALPINE  
Press the ( ) DN or UP ( ) button repeatedly  
until the disc title you want to erase is dis-  
played.  
3
DN  
UP  
Press and hold the FUNC button for at least 2  
seconds to erase the disc title displayed.  
4
5
FUNC  
Press and hold the TITLE button for at least 2  
seconds to cancel the disc title erasing mode.  
CLK  
TITLE  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Shuttle Opera tion  
Controlling CD Shuttle  
(Op tiona l)  
An optional 6-disc or 12-disc CD Shuttle may  
be connected to the CDA-7846E if it is Ai-NET  
compatible. With a CD Shuttle connected to  
the Ai-NET input of the CDA-7846E, the CD  
Shuttle will be controllable from CDA-7846E.  
Using the KCA-400C (the Multi-Changer  
Switching device) multiple changers can be  
controlled by the CDA-7846E.  
See the Multi-Changer Selection section on  
page 44 for selecting the CD Shuttles.  
Notes:  
The controls on the CDA-7846E for CD  
Shuttle operation are operative only when a  
CD Shuttle is connected.  
The "CHG" indicator illuminates in the CD  
Shuttle mode.  
Press the SOURCE button to activate the  
CHANGER mode. The display shows the  
“Changer” disc number and track number.  
1
2
TUNER  
CD  
SOURCE  
Note:  
*
The source indicator varies depending on  
the connected source.  
CHANGER*  
Press the FUNC button to select the FUNC  
OFF1 or OFF2 mode.  
FUNC  
FUNC OFF1 mode:  
In this mode you can select the discs  
between 1 and 6.  
FUNC OFF2 mode (for 12-disc CD Shuttle  
only):  
(FUNC OFF1 mode)  
(FUNC OFF2 mode)  
In this mode you can select the discs  
between 7 and 12.  
FUNC  
(FUNC ON mode)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Shuttle Opera tion  
Controlling CD Shuttle  
(Op tiona l)  
(Continue d )  
Press the Function button (F1 through F6)  
corresponding to one of the discs loaded in the  
CD Shuttle. The selected disc number appears  
in the display and CD playback starts.  
3
Notes:  
For FUNC OFF1 mode  
For FUNC OFF2 mode  
To select the disc numbers 7 to 12 loaded in  
the 12-disc CD Shuttle, press the FUNC  
button twice, then press the desired  
Function button (F1 to F6).  
7
1
8
2
9
3
10  
4
11  
5
12  
6
If the FUNC indicator is ON, the F1 to F6  
buttons become unfunctional.  
When the "FUNC" indicator is on, pressing  
the F1 or F2 button can select the disc.  
F1  
F2  
F3  
F4  
F5  
F6  
Note: After selecting the desired disc, you ban  
operate in the same way as for the CDA-  
7846E CD player. For details, please see  
the CD Operation section.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Shuttle Opera tion  
Se a rc hing Title d Disc s  
(Title Se a rc h Me nu)  
Press the TITLE button to activate the Title  
Display mode.  
CLK  
TITLE  
1
2
Press and hold the T.S.M. button for at least 2  
seconds while the title is displayed.  
The title in memory blinks in the display.  
BAND  
T.S.M.  
ALPINE  
Press the ( ) DN or UP ( ) button to select  
the desired disc title.  
3
4
DN  
UP  
Press the T.S.M. button to play the selected  
disc.  
The unit will automatically search the disc and  
will play that disc.  
BAND  
T.S.M.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Shuttle Opera tion  
Multi-Cha ng e r Se le c tion  
Alpine’s Ai-NET system will support up to 6 CD  
Shuttles. When operating two or more  
changers, the KCA-400C (Multi-Changer  
Switching device) must be used. If you use 1  
Switching device, you can connect up to 4 CD  
Shuttles. If you use 2 Switching devices, you  
can connect up to 6 CD Shuttles.  
RUE-4185  
BAND  
PROG  
SOURCE  
A.PROC  
Remote Control  
Press the SOURCE button on the CDA-7846E  
to activate the CD Changer mode.  
1
SOURCE  
Alternatively, press the SOURCE button on the  
Remote Controller (RUE-4185) to activate the  
CD Shuttle mode. Proceed to Step below to  
select the desired CD Shuttle.  
SOURCE  
Press the BAND button on the CDA-7846E or  
the RUE-4185 to activate the CD Shuttle  
Selection mode.  
BAND  
T.S.M.  
2
3
The CD Shuttle Selection mode remains active  
for 3 seconds after Step is performed. Press  
the BAND button until the desired CD Shuttle  
indicator appears on the display.  
BAND  
T.S.M.  
Changer-X  
Note: If the selected CD Shuttle is not con-  
nected, the display will show "No  
Changer X".  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CD Shuttle Opera tion  
RUE-4185  
Multi-Cha ng e r Se le c tion  
(Continue d )  
BAND  
PROG  
SOURCE  
A.PROC  
Remote Control  
Press the BAND button on the Remote  
Controller until the desired changer indicator  
appears on the display.  
3
4
BAND  
PROG  
To operate the selected changer, see "CD  
Operation" section.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re mote Control English  
Controls  
1 Mute Button  
Press the button to lower the volume by  
20 dB instantly. Press the button again to  
cancel.  
VOLUME  
MUTE  
1
6
7
2 Power Switch  
PWR  
ENT  
2
3
4
5
Press the switch to turn the power on/off.  
3
Button  
CD-CHG  
Press the button to switch between the  
Play and Pause modes for the CD.  
BAND  
PROG  
SOURCE  
A.PROC  
4 CD Changer Button  
Press the button to change to the CD  
Shuttle operation.  
REMOTE CONTROL UNIT  
5 Band/Program Button  
Radio mode: BAND Button  
Press the button and the band will  
change as shown below.  
FM1FM2AM  
6 Volume Adjustment Buttons  
To increase the volume level.....  
Press the  
To decrease the volume level.....  
Press the button  
button  
7
Button  
Radio mode: Pressing the button will  
select, in ascending order, stations  
programmed into the radio's presets as  
shown below.  
1 2  
6
CD/CD Shuttle mode: DISC Select  
(UP) Button  
Press the button to select a disc in  
ascending order.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re mote Control English  
8
Button  
Radio mode: SEEK (DN) Button  
CD/CD Shuttle mode: Press the button to  
go back to the beginning of the current  
track.  
VOLUME  
9
Ä
Button  
MUTE  
Radio mode: SEEK (UP) Button  
CD/CD Shuttle mode: Press the button to  
advance to the beginning of the next track.  
PWR  
ENT  
8
9
Button  
CD-CHG  
10  
Radio mode: Pressing the button will  
select, in descending order, stations  
programmed into the radio's presets as  
shown below.  
BAND  
PROG  
SOURCE  
A.PROC  
12  
11  
REMOTE CONTROL UNIT  
6 5  
1
CD/CD Shuttle mode: DISC Select (DN)  
Button  
Press the button to select a disc in  
descending order.  
Å Audio Processor Button**  
Press the button to call the external audio  
processor mode.*  
Ç Audio Select Button  
Press to select the audio source.  
*
For the operation of external audio  
processor, refer to the Owner's Manual of  
the external audio processor you pur-  
chased.  
** This button is used in conjunction with an  
optional Ai-NET processor.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re mote Control English  
Ba tte ry Re p la c e m e nt  
Applicable battery: Use two "AAA" sized dry  
batteries or equivalent.  
Opening the battery cover  
Slide out the battery cover while firmly pressing  
outward.  
Replacing the battery  
Put the batteries in the case as illustrated.  
Closing the cover  
Push the cover as illustrated until a click is  
heard.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Disc Ca re  
Corre c t Ha nd ling  
CORRECT  
Do not drop the disc while handling. Hold the  
disc so you will not leave fingerprints on the  
surface. Do not affix tape, paper, or gummed  
labels on the disc. Do not write on the disc.  
INCORRECT  
CORRECT  
Disc Cle a ning  
Fingerprints, dust, or soil on the surface of the  
disc could cause the CD player to skip. For  
routine cleaning, wipe the playing surface with  
a clean, soft cloth from the centre of the disc to  
the outer edge. If the surface is heavily soiled,  
dampen a clean soft cloth in a solution of mild  
neutral detergent before cleaning the disc.  
Disc Ac c e ssorie s  
There are various accessories available on the  
market for protecting the disc surface and  
improving sound quality. However, most of  
them will influence the thickness and/or  
diameter of the disc. Using such accessories  
can cause the disc to be out of standard  
specifications and may create operational  
problems. We recommend not using these  
accessories on discs played in Alpine CD  
players.  
Transparent Sheet  
Disc Stabilizer  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
In Ca se of Diffic ulty  
If you encounter a problem, please review the  
items in the following check list. This guide will  
help you isolate the problem if the unit is at  
fault. Otherwise, make sure the rest of your  
system is properly connected or consult your  
authorized Alpine dealer.  
Initia l Turn-on Afte r  
Insta lla tion  
Symptom  
Cause and Solution  
No function or display.  
Car's ignition is off.  
If connected per instructions, the unit will  
not operate with the car's ignition off.  
Improper connection of power leads.  
Check connections of the power leads.  
Blown fuse.  
Check the fuses on the Battery leads;  
replace with the proper value if  
necessary.  
Internal micro-computer malfunctioned due  
to interference noise etc.  
Press the Reset button with a ball-point  
pen or other pointed article.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
In Ca se of Diffic ulty  
Ra d io Mod e  
Symptom  
Cause and Solution  
Unable to receive stations.  
No antenna or open connection in cable.  
Make sure the antenna is properly  
connected; replace the antenna or cable  
if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
Make sure the tuner is in the DX mode.  
If the area you are in is not known to be a  
weak signal area, the antenna may not be  
grounded and connected properly.  
Check your antenna connections; make  
sure the antenna is properly grounded at  
its mounting location.  
The antenna may not be the proper length.  
Make sure the antenna is fully extended;  
if broken, replace the antenna with a new  
one.  
Broadcast is noisy.  
The antenna is not the proper length.  
Extend the antenna fully; replace it if it is  
broken.  
The antenna is poorly grounded.  
Make sure the antenna is grounded  
properly at its mounting location.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
In Ca se of Diffic ulty  
CD Mod e  
Cause and Solution  
Symptom  
There is a CD already in the transport.  
Eject the CD in transport and remove it.  
The CD is being improperly inserted.  
CD insertion not possible.  
Make sure the CD is being inserted per  
instruction in the Owner's Manual.  
Unable to Fast-Forward or Backward.  
Sound skips due to vibration.  
The CD has been damaged.  
Eject the CD and discard; using a  
damaged CD in your unit can cause  
damage to the transport.  
Improper mounting.  
Securely re-mount the unit.  
Disc is very dirty.  
Clean the disc.  
Disc has scratches.  
Change the disc.  
Dirty or scratched disc.  
Sound skips without vibration.  
Clean the disc: damaged discs should be  
replaced.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
In Ca se of Diffic ulty  
Ind ic a tion for CD Shuttle  
Indication  
Cause and Solution  
Protective circuit is activated due to high  
temperature.  
The indicator will disappear when the  
temperature returns to within operation  
range.  
Hi Temp.  
Disc won't return to magazine.  
Press the eject button.  
Insert an empty magazine and once  
again press the eject button to recover  
the disc.  
ERROR  
Mechanical error.  
Press the eject button.  
When display message disappears,  
correctly re-insert disc into magazine and  
try again.  
If it still won't operate correctly, consult  
your Alpine dealer.  
No magazine is loaded into the CD Shuttle.  
Insert a magazine.  
NO MAGAZINE  
No indicated disc.  
Choose another disc.  
NO DISC  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Sp e c ific a tions  
FM TUNER SECTION  
Tuning Range ...................................................................................................... 87.5 – 108.0 MHz  
Mono Usable Sensitivity .......................................................................... 9.3 dBf (0.8µV/75 ohms)  
50 dB Quieting Sensitivity ...................................................................... 13.5 dBf (1.3µV/75 ohms)  
Alternate Channel Selectivity ................................................................................................. 80 dB  
Signal-to-Noise Ratio ............................................................................................................. 65 dB  
Stereo Separation .................................................................................................................. 35 dB  
AM TUNER SECTION  
Tuning Range ........................................................................................................ 531 – 1,602 kHz  
Usable Sensitivity ................................................................................................... 22.5µV/27.0 dB  
CD SECTION  
Frequency Response* .................................................................................. 5 – 20,000 Hz (±1 dB)  
Wow & Flutter (% WRMS)* ...................................................................... Below measurable limits  
Total Harmonic Distortion* ................................................................................. 0.008% (at 1 kHz)  
Dynamic Range*.................................................................................................... 95 dB (at 1 kHz)  
Signal-to-Noise Ratio* ............................................................................................................ 95 dB  
Channel Separation* ............................................................................................. 85 dB (at 1 kHz)  
REMOTE CONTROL  
Battery Type ................................................................................................. "AAA" sized dry battry  
Battery Quantity ..............................................................................................................................2  
Dimensions (W x H x D) .................................... 56mm (2-1/4") x 14mm (9/16") x 105mm (4-1/8")  
Weight (without battery) ................................................................................................. 50 g (1 oz)  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Sp e c ific a tions  
GENERAL  
Power Requirement ..................................................................... 14.4V DC (11 – 16V (allowable))  
Maximum Power Output ..................................................................................................... 40W x 4  
Pre-Output Voltage ........................................................................................... 2000 mV/10k ohms  
Bass ....................................................................................................................... ±15 dB at 30 Hz  
Treble ....................................................................................................................±10 dB at 10 kHz  
Weight ................................................................................................................ 1.5 kg (3 lbs. 5 oz)  
CHASSIS SIZE  
Width ............................................................................................................................. 178mm (7")  
Height .............................................................................................................................. 50mm (2")  
Depth ...................................................................................................................... 150mm (5-7/8")  
NOSEPIECE SIZE  
Width ....................................................................................................................... 170mm (6-3/4")  
Height ................................................................................................................... 46mm (1-13/16")  
Depth ............................................................................................................................22mm (7/8")  
*
Measured at internal amp input stage.  
Note: Due to product improvement, specifica-  
tions and design are subject to change  
without notice.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Adder Technology Computer Hardware DDC Ghost User Manual
Advantech Computer Hardware UNO 2173A AF User Manual
AKG Acoustics Headphones CCS User Manual
Amazon Tablet 23 000466 01 User Manual
Amcor Refrigerator WV 50 User Manual
American Dryer Corp Clothes Dryer AD 25 User Manual
American Standard Indoor Furnishings T480500 User Manual
Audiovox Automobile Electronics CA 5150 User Manual
Audiovox Remote Starter AS 9256 User Manual
Baby Trend Car Seat CSO190AD809 User Manual