Switches
product information
8100S Series Fiber Switches
LAYER 2–4 FAST ETHERNET STACKABLE SWITCHES
The 8100S Series fiber switches offers 100FX multimode fiber
ports managed switches with high performance Layer 2-4
switching designed for the edge of network.
The 8100S Series consists of 16 100FX
(SC and LC) MMF ports and 24 100FX
(LC) MMF ports switch models. The
16-port models come with 16 100FX
plus 8 10/100TX ports. All 8100S Series
switches offer two Gigabit combo
10/100/1000T-SFP uplink ports plus
two dedicated stacking connectors
that deliver a total of 10Gbps stack
bandwidth. The stackable Ethernet
series offers fiber connectivity suitable
for a network that requires high security
and long distance connectivity.
Ease of Management
Designed for rapid deployment with
the minimum of configuration time, the
8100S Series offers features such as
Voice VLAN, LLDP-MED, Enhanced
Stacking and Web management GUI
that facilitates simple and effective
approach to network management.
Voice VLAN segregates VoIP traffic
from regular Ethernet traffic and
applies to it a higher QoS. It takes the
complexity out of VoIP deployments,
ensures high voice quality and protects
time sensitive voice traffic from being
flooded by other data. LLDP-MED lets
the user auto-configure end stations to
send preconditioned traffic that adheres
to Voice VLAN configured network
policies.
Key Features
Secure
» The 8100S Series fiber switches are designed to
offer 100FX multi-mode connectivity for a higher
level of security not found in copper based Ethernet
systems. This combined with advanced access
security features protect the critical edge of the
network.
Able to go the distance
» Fiber connectivity is ideal for networks that demand
high bandwidth over long distances. The 8100S
Series fiber modules support Gigabit and 100Mbps
up to a distance of 2 kilometers over multi-mode
fiber, and up to 80 kilometers over single-mode fiber.
Fiber is able to transport data over long distances
without the type of degradation that you see with
copper, allowing high scalable and flexible network
design for big business campuses, educational
campus and large retails stores.
Redundant Power Options
All variants of the 8100S fiber switch
family feature two internal power
supplies as standard, allowing the
switches to be powered from two
separate building feeds making the
8100S Series less susceptible to building
power failures and ensuring continuous
switch operation.
Stable in harsh environment
» Fibers complete immunity to electrical interference
makes it resistant to cross talk between signals
among different cables and environmental noise,
such as radio waves and electric signals. This makes
the 8100S Series ideal for high voltage environments
and in places with high EMI (Electromagnetic
Interference), such as alongside utility lines, conveyor
belts, power lines, and railroad tracks.
Enhanced Stacking with 8100S Series
enables the user to make software
upgrades for multiple switches with
a single command, plus update all
configurations in a single management
session.
Stacking
The physical stacking capability
integrated into this platform is designed
to offer simplified management for
higher port density applications. Up to
three stackable switches of the 8100S
copper and fiber series can be mixed
and stacked together to a maximum of
78 ports.
The industry standard CLI of AlliedWare
Plus™ combined with the simple and
intuitive Web management GUI reduces
the training needs for those who require
granularity of control, by providing a
familiar interface for advanced users.
NOT AVAILABLE IN THE UNITED STATES AND CANADA
alliedtelesis.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches
Servers
SwitchBlade x908
Layer 3 Stackable Switch
LACP
8100S Series
Hardware Stacking
Expandable to
78 Ports
Desktop PCs
HDMI Stacking Interface
(8100S/16F8-SC)
2711FX
MC102XL
Thin client
NOT AVAILABLE IN THE UNITED STATES AND CANADA
alliedtelesis.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches
MIB Support
» DHCP snooping
» DHCP option 82
» RFC 3046 DHCP relay
» RFC 951 BootP
Specifications
» RFC 1213 MIB-II
System Capacity
» RFC 1215 TRAP MIB
» 128MB RAM
» RFC 1493 Bridge MIB
» 16MB flash memory
» 16K MAC addresses
» 266MHz CPU
» RFC 2863 Interfaces group MIB
» RFC 1643 Ethernet-like MIB
» RFC 2618 RMON MIB
IP Multicast
» RFC 1112 IGMPv1 snooping
» RFC 2236 IGMPv2 snooping
» IGMPv2 snooping querier
» Multicast groups – 255
» RFC 2674 IEEE 802.1Q MIB
» RFC 2096 IP forwarding table MIB
» Allied Telesis managed switch MIB
Maximum Bandwidth
» Non-blocking for all packet sizes
Wirespeed Switching (Layer 2/3) on all
Ethernet Ports
IPv6
Management
» IPv6 host
» 14,880pps for 10Mbps Ethernet
» 148,800pps for 100Mbps Ethernet
» 1,488,000pps for 1000Mbps Ethernet
» RFC 854 Telnet server
» IPv6 ACL
» Console management port
» AlliedWare Plus CLI
» Web GUI
» ICMPv6
» Dual-stack IPv4/IPv6 management
» IPv6 applications: WEB/SSL, Telnet server/SSH,
Environmental Specifications
» Enhanced Stacking
» RFC 1866 HTML
» RFC 2068 HTTP
» RFC 2616 HTTPS
» RFC 1350 TFTP
» zModem
» Operating temperature: 0ºC to 40ºC
IP Routing
» Storage temperature: -25ºC to 70ºC
» Static IPv4 routing – 4K
» Operating humidity: 5% to 90% non-condensing
» Storage humidity: 5% to 90% non-condensing
» Max operating altitude: 3,048 m (10,000 ft)
» RIPv1, v2
» Proxy ARP
Security / IEEE 802.1x
Port Configuration
» RFC 1305 SNTP
» RFC 1155 MIB
» TACACS+
» Auto-negotiation, duplex, MDI/MDI-X, IEEE 802.3x
flow control/back pressure
» RFC 2865 RADIUS client
» RFC 1157 SNMPv1
» RFC 1901 SNMPv2c
» RFC 3411 SNMPv3
» RFC 2866 RADIUS accounting
» Head of Line (HoL) blocking prevention
» Broadcast storm control
» Link flap protection
» IEEE 802.1x port-based Network Access Control
(NAC)
» RFC 1757 RMON 4 groups: Stats, History, Alarms
and Events
» Supplicant
» Group link control
» Authenticator
» Port mirroring
» RFC 3164 Syslog protocol (client)
» Event log
» IEEE 802.1x multiple supplicant mode
» Piggy-back mode
Ethernet Specifications
» RFC 3176 sFlow
» Auto config
» RFC 894 Ethernet II encapsulation
» Per port MAC address limiting
» Per port MAC address filtering
» MAC address security/lockdown
» RFC 1321 MD-5
» IEEE 802.1D MAC bridges
» IEEE 802.1Q Virtual LANs
VLAN
» IEEE 802.2 Logical link control
» IEEE 802.3ac VLAN TAG
» 4096 VLANs (IEEE 802.1Q)
» Port-based VLANs
» EAP, EAP-TLS, LEAP, PEAP, TTLS
» Dynamic VLANs
» IEEE 802.1ax-2008 (LACP) link aggregation
» IEEE 802.3u 100TX
» MAC-based VLANs – 256
» IP subnet-based VLANs – 256
» Port-based Private VLANs
» GARP VLAN Registration Protocol (GVRP)
» Guest VLANs
» IEEE 802.3x Full-duplex operation
» IEEE 802.3z Gigabit Ethernet
» Jumbo frames (9198 bytes)
» Secure VLANs
» Layer 2/3/4/ Access Control Lists (ACLs)
» SSLv3 for Web management
» SSL
Link Aggregation
Quality of Service (QoS)
» IEEE 802.3ad LACP - eight groups
» SSH
» Eight egress queues per port
» Static link aggregation - 24 groups
» SSH session time out
» Microsoft NAP compliant
» Symantec NAC support
» Egress rate limiting
» Voice VLAN
Link Discovery
» IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
» Automatic QoS
» Link Layer Discovery Protocol-Media Endpoint
(LLDP-MED)
» IEEE 802.1p Class of Service with strict and weighted
round robin scheduling
Stacking Features
» 10Gbps stacking bandwidth via dedicated HDMI
stacking ports
» RFC 2474 DSCP for IP-based QoS
» RFC 2475 Differentiated services architecture
» Layer 2, 3 and 4 criteria
General Protocols
» RFC 768 UDP
» Hardware stack up to three units (78 ports) using
HDMI stacking ports or stack up to 24 units using
Enhanced Stacking
» RFC 791 IP
» RFC 792 ICMP
Spanning-Tree Protocol
» Single system appearance
» Single IP management
» RFC 793 TCP
» IEEE 802.1D Spanning-Tree Protocol
» RFC 826 ARP
» IEEE 802.1D-2004 Rapid Spanning-Tree Protocol
» Backup master
» RFC 950 Subnetting, ICMP
» RFC 1027 Proxy ARP
» RFC 1035 DNS
» IEEE 802.1q-2005 Multiple Spanning-Tree Protocol
(15 instances)
» Link aggregation / trunking across hardwire stack
» Port mirroring across stack
» VLAN across stack
» BPDU guard
» Loop guard
» Root guard
» RFC 1122 Internet host requirements
» DHCP client
» Maximum HDMI stacking cable length 1m
NOT AVAILABLE IN THE UNITED STATES AND CANADA
alliedtelesis.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8100S Series Fiber Switches | Layer 2–4 Fast Ethernet Stackable Switches
Compliance Standards
LATENCY
PRODUCT
SWITCHING CAPACITY
FORWARDING RATE
» IEEE 802.3 – 10T
10Mb
100MB
» IEEE 802.3u – 100TX with auto-negotiation
» IEEE 802.3ab – 1000T Gigabit Ethernet
» 100FX SFP support
AT-8100S/16F8-SC
AT-8100S/16F8-LC
AT-8100S/24F-LC
18.8Gbps
18.8Gbps
18.8Gbps
27.9Mpps
27.9Mpps
27.9Mpps
81µs
11µs
81µs
81µs
11µs
11µs
» 1000X SFP support
Physical Specifications and MTBF Figures
Safety and Electromagnetic Emissions
Certifications
PRODUCT
WIDTH
DEPTH
HEIGHT
WEIGHT
MTBF (HOURS)
» EMI: FCC class A, CISPR class A, EN55022 class
A, C-TICK, VCCI Class A, CE, EN601000-3-2,
EN601000-3-3
AT-8100S/16F8-SC
440 mm (17 in)
441 mm (17.3 in)
441 mm (17.3 in)
441 mm (17.3 in)
322 mm (12.7 in)
4.1 kg (9.1 lb)
4.4 kg (9.75 lb)
4.4 kg (9.75 lb)
190,000
AT-8100S/16F8-LC
AT-8100S/24F-LC
440 mm (17 in)
440 mm (17 in)
322 mm (12.7 in)
291 mm (11.5 in)
170,000
140,000
» Immunity: EN55024
» Safety: UL 60950-1 (cUlus), EN60950-1 (TUV),
EN60825
Power and Noise Characteristics
RoHS Standards
MAX POWER
PRODUCT
MAX HEAT
CONSUMPTION DISSIPATION
NOISE
VOLTAGE
FREQUENCY
» Compliant with European and China RoHS standards
AT-8100S/16F8-SC
AT-8100S/16F8-LC
AT-8100S/24F-LC
22W*
22W*
22W*
75 BTU/hr
75 BTU/hr
75 BTU/hr
55.4 dB
55.4 dB
55.4 dB
100-240V AC (10% auto-ranging)
100-240V AC (10% auto-ranging)
100-240V AC (10% auto-ranging)
47-63Hz
47-63Hz
47-63Hz
Package Description
» AT-8100S/xx switch
» AC power cords
» Management cable (RJ-45 to DB-9)
* Standard product with dual AC power supply
Optical Ports Specifications
» Rubber feet for desktop installation and 19” rack-
mountable hardware kit accessories
PRODUCT
OPTICAL PORTS
» Install guide and CLI users guide available at
alliedtelesis.com
AT-8100S/16F8-SC
AT-8100S/16F8-LC
AT-8100S/24F-LC
100FX (MMF)
100FX (MMF)
100FX (MMF)
» HDMI stacking cable (1 meter)
NOT AVAILABLE IN THE UNITED STATES AND CANADA
alliedtelesis.com
Download from Www.Somanuals.com. All Manuals Search And Download.
8100S Fiber Series Switches | Layer 2–4 Fast Ethernet Stackable Switches
Ordering Information
8100S Series Fiber Switches
AT-8100S/16F8-SC-xx
Small Form Pluggable Optics Modules
16 100M fiber SC ports, 8-port 10/100TX
2 combo ports (10/100/1000T-100/1000 SFP)
2 HDMI stacking ports
AT-SPSX
SFP, MMF, 1000Mbps, 220 / 500 m, 850 nm, LC
Standard two AC power supplies
AT-SPSX/1
AT-8100S/16F8-LC-xx
SFP, MMF, 1000Mbps, 220 / 550m, 850 nm, LC
Extended temperature: -40ºC to 85ºC
16 100M fiber LC ports, 8-port 10/100TX
2 combo ports (10/100/1000T-100/1000 SFP)
2 HDMI stacking ports
AT-SPEX
Standard two AC power supplies
SFP, MMF, 1000Mbps, 2 km, 1310 nm, LC
AT-8100S/24F-LC-xx
24 100M fiber LC ports
AT-SPLX10
SFP, SMF, 1000Mbps, 10 km, 1310 nm, LC
2 combo ports (10/100/1000T-100/1000 SFP)
2 HDMI stacking ports
Standard two AC power supplies
AT-SPLX10/I
SFP, SMF, 1000Mbps, 10 km, 1310 nm, LC
Extended temperature: -40ºC to 85ºC
AT-SPLX40
SFP, SMF, 1000Mbps, 40 km, 1310 nm, LC
Where xx =
10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord
AT-SPZX80
SFP, SMF, 1000Mbps, 80 km, 1550 nm, LC
AT-SPBD10-13
SFP, SMF, 1000Mbps, 10 km, 1310/1490 nm,
LC-BiDi
AT-SPBD10-14
SFP, SMF, 1000Mbps, 10 km, 1490/1310 nm,
LC-BiDi
AT-SPFX/2
SFP, MMF, 100Mbps, 2 km, 1310 nm, LC
AT-SPFXBD-LC-13
SFP, SMF, 100Mbps, 10 km, 1310/1510 nm, LC-BiDi
AT-SPFXBD-LC-15
SFP, SMF, 100Mbps, 10 km, 1510/1310 nm, LC-BiDi
AT-SPFX/15
SFP, SMF, 100Mbps, 15 km, 1310 nm, LC
NOT AVAILABLE IN THE UNITED STATES AND CANADA
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA & CSA Operations | Incheonweg 7 | 1437 EK Rozenburg | The Netherlands | T: +31 20 7950020 | F: +31 20 7950021
alliedtelesis.com
© 2013 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-000403 Rev.C
Download from Www.Somanuals.com. All Manuals Search And Download.
|