Allied Telesis Network Card iMAP FX10LX User Manual

Datasheet | integrated Multiservice Access Platform  
FX10LX  
AT-TN107-A 10 Port 100Mbps LX FTTx Service Module  
Fiber to the Home/Business over  
Dual Fiber  
Part of AlliedTelesis’ IP Broadband  
Access Family  
Key Features  
The FX10LX is one of three Allied Telesis  
FTTH/B service modules for the iMAP product  
family.This card provides 10 ports at 100Mbps  
(full-duplex) over two fibers (Single-mode). Also  
available are Single-mode single fiber and Multi-  
mode dual fiber variations. The Gigabit feed  
into the iMAP backplane allows the FX10  
modules to operate completely at wirespeed.  
Whether it is broadband ADSL2+, FTTH, POTS  
orT1/E1 circuits, the iMAP family is the ideal  
platform for last mile service delivery.The  
FX10LX line card can be used with any of the  
iMAP family of carrier grade, IP Multiservice  
Access platforms:  
Port-based  
VLANs  
VLAN translation  
Double-tagging (HVLAN)  
Filtering  
Ingress Metering  
Egress port rate limiting  
Countings  
iMAP 9700 (9RU, 17 service slots)  
iMAP 9400 (3RU, 7 service slots)  
MiniMAP 9100 (1RU, 3 service slots)  
Classification and remarking  
RMON  
The additional Layer 2+ switching allows  
Service Providers to meet the demands of  
multi-cast IP video,Video on Demand, voice and  
data services. With the FX10 modules, you can  
be assured future bandwidth needs of HDTV  
will be addressed as consumer demand  
increases.  
Provisioning, management, and diagnostics of  
subscriber ports can be accomplished from  
either the iMAP command line interface or the  
NMS.  
QoS  
Four Queues  
Priority scheduling  
Security  
MAC limiting (up to 64)  
MAC flooding – VLAN-based  
The FX10LX has been designed to survive the  
most rugged environmental conditions. It can be  
confidently deployed in either a central office or  
in outdoor enclosures withstanding extremes of  
heat, cold, and light exposure.  
AlliedTelesis’ OAM solution allows for individual  
full configuration and monitoring of each port.  
The FX10 modules provide configuration tools  
to:  
Services  
STP and RSTP  
Video-optimized  
Upstream forwarding only  
AlliedTelesis provides a large portfolio of FTTx,  
Ethernet and xDSL transport and access  
equipment. In addition, AlliedTelesis provides a  
complete set of xDSL and FTTx CPE solutions  
in the form of Multiservice Gateways, Layer 2/  
Layer 3 switches, routers or media converters  
to terminate the broadband link.  
Control or limit subscriber access  
Enforce port security rules  
Limit services to a port  
Manage QoS across the card  
Support network double-tagging  
Control ingress or egress service rates  
Support for  
Business services  
Residential service  
Dual fiber, Single-mode  
A multitude of applications can be supported  
with the fiber-based 100Mbps access interfaces  
including:  
FTTH forVoice,Video and Data Services  
FTTB for IP PBX, Ethernet andVPN services  
Campus LAN network uplinks  
Whether it is derived voice or HDTV IPVideo,  
the FX10 will satisfy all bandwidth and mission  
critical services with ease.  
Allied Telesis  
Download from Www.Somanuals.com. All Manuals Search And Download.  

ACP EP Memory Camera Accessories ACP EP User Manual
ADC Power Supply Power Distribution Products User Manual
Advantek Networks Network Card AWN MIMO 54RA User Manual
Aiphone Home Security System MY 1HD User Manual
Amana Washer Dryer LEA10AW User Manual
AMD Computer Hardware HD 2400 User Manual
American Audio Microphone WM UHF16 User Manual
Asus Network Card SCB 2408 D User Manual
Avocent Personal Computer 3100 3200 User Manual
Bacharach Carbon Monoxide Alarm 3015 4256 User Manual