Datasheet | integrated Multiservice Access Platform
NTE8
AT-TN125-A 8 Port T1/E1 MLPPP Service Module
BondedT1/E1 Ports using MLPPP
for Network Backhaul
Provide Business Router
Connectivity
Key Features
• 8T1/E1 ports
Remote locations have often been ignored by
Service Providers due to the lack fiber
infrastructure between COs and remote
terminals/locations. As the rest of the last mile
network converges on IP/Ethernet delivery
technologies, these locations need a means to
leverage IP/Ethernet while also offering legacy
POTS and last mile broadband services.
The secondary application that is supported by
the NTE8 service module is providing last mile
access to small and medium sized businesses
utilizingT1/E1 PPP uplinks. As last mile access
continues to evolve, Service Providers can
leverage the same last mile access infrastructure
used to deliver residential services to delivery
T1/E1 services.
• Support for MLPPP Encapsulation
• Network WAN Connectivity Between iMAPs
• Business CPE Support
• Support for Multiple Remote Locations
The NetworkTerminating Equipment (NTE8) 8
port subscriber module is ideal for delivery of
converged POTS and DSL services to remote
locations. Using MLPPP as a bonding
Business routers employing PPP overT1/E1
WAN uplinks can use the NTE8 to terminate
data circuits and transport traffic over standard
VLAN circuits throughout the last mile
• Flexible control of traffic priorities for voice,
data and Business applications
• QoS
technology, one to 8 ports can be bonded
together to deliver up to 16Mbps of bandwidth
to remote locations fed by traditionalT1/E1
circuits. Since the NTE8 uses MLPPP as the
bonding protocol for the 8 individual T1/E1
ports, all ports will carry converged POTS,VoIP
and Data traffic - either collectively or
network. Using iMAP elements at a central
location,VLANs can be switched to the
appropriate IP Data network. Leveraging
standards based IP/Ethernet technologies, the
iMAP and NTE8 service modules truly
• Four Queues
• Priority scheduling
converge all traffic - residential and business.
individually. If port or network outages disable
individualT1/E1 ports on the NTE8 module,
the remaining MLPPP bundled circuits will
continue to carry network traffic.
Part of a IP Broadband Access
Family
Whether it is broadband ADSL2+, FTTH or
POTS, the iMAP family is the ideal platform for
last mile service delivery.The NTE8 line card
can be used with any of the iMAP family of
carrier grade, IP Multiservice Access platforms:
The NTE8 service module is intended to be
used in any of the iMAP product chassis. In
addition, individual NTE8 modules at a central
location can be used to aggregate traffic from
multiple remote locations. All traffic is mapped
to service carryingVLANs for proper traffic
segmentation and classification.
• iMAP 9700 (9RU, 17 service slots)
• iMAP 9400 (3RU, 7 service slots)
• MiniMAP 9100 (1RU, 3 service slots)
Provisioning, management, and diagnostics of
subscriber ports can be accomplished from
either the iMAP command line interface or the
NMS.
The AT-TN125 has been designed to survive
the most rugged environmental conditions. It
can be confidently deployed in either a central
office or in outdoor enclosures withstanding
extremes of heat, cold, and light exposure.
AlliedTelesis’ iMAP family of integrated
Multiservice Access Platforms
Allied Telesis
Download from Www.Somanuals.com. All Manuals Search And Download.
|