Washer-Extractors
Cabinet Freestanding
Coin Models
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 9002062R2
July 2008
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation/Supplement
Introduction.........................................................................................
Model Identification .............................................................................
2
2
Table of
Contents
Safety Information..............................................................................
Operator Safety.....................................................................................
3
Specifications and Dimensions...........................................................
7
Installation........................................................................................... 11
Operation............................................................................................. 15
Control Panel ........................................................................................ 15
Operating Instructions .......................................................................... 16
Disposal of Unit................................................................................... 18
© Copyright 2008, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
9002062
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Introduction
Model Identification
Information in this manual is applicable to these
models:
NX18BVPA6
NX18BVPA7
NX18BVQA6
NX18BVQA7
NX18BVXA6
NX18BVXA7
NX18BVXM7
NX30BVPA6
NX30BVPA7
NX30BVQA6
NX30BVQA7
NX30BVXA6
NX30BVXA7
NX30BVXM7
SX18BVPA7
SX18BVQA7
SX18BVXA7
SX18BVXM7
SX30BVPA7
SX30BVQA7
SX30BVXA7
SX30BVXM7
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Safety Information
Explanation of Safety Messages
Important Safety Instructions
Precautionary statements (“DANGER,” “WARNING,”
and “CAUTION”), followed by specific instructions,
are found in this manual and on machine decals. These
precautions are intended for the personal safety of the
operator, user, servicer, and those maintaining the
machine.
WARNING
To reduce the risk of fire, electric shock,
serious injury or death to persons when
using your washer, follow these basic
precautions:
W023
DANGER
1. Read all instructions before using the washer.
DANGER indicates the presence of a
hazard that will cause severe personal
injury, death, or substantial property
damage if the danger is ignored.
2. Refer to the GROUNDING INSTRUCTIONS in
the INSTALLATION manual for the proper
grounding of the washer.
3. Do not wash textiles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, kerosene, waxes, cooking oils, dry-
cleaning solvents, or other flammable or
explosive substances as they give off vapors that
could ignite or explode.
WARNING
WARNING indicates the presence of a
hazard that can cause severe personal
injury, death, or substantial property
damage if the warning is ignored.
4. Do not add gasoline, dry-cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
5. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using a
washing machine or combination washer-dryer,
turn on all hot water faucets and let the water
flow from each for several minutes. This will
release any accumulated hydrogen gas. The gas is
flammable, do not smoke or use an open flame
during this time.
CAUTION
CAUTION indicates the presence of a
hazard that will or can cause minor
personal injury or property damage if the
caution is ignored.
Additional precautionary statements (“IMPORTANT”
and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used
to inform the reader of specific procedures where
minor machine damage will occur if the procedure
is not followed.
6. Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children. This is a safety
rule for all appliances.
NOTE: The word “NOTE” is used to communicate
installation, operation, maintenance or servicing
information that is important but not hazard
related.
7. Before the washer is removed from service or
discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is
moving.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9002062
3
Installation/Operation Supplement
9. Do not install or store the washer where it will be
exposed to water and/or weather.
20. If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
10. Do not tamper with the controls.
21. Be sure water connections have a shut-off valve
and that fill hose connections are tight. CLOSE
the shut-off valves at the end of each wash day.
11. Do not repair or replace any part of the washer, or
attempt any servicing unless specifically
recommended in the user-maintenance
instructions or in published user-repair
instructions that the user understands and has the
skills to carry out.
22. Loading door MUST BE CLOSED any time the
washer is to fill, tumble or spin. DO NOT bypass
the loading door switch by permitting the washer
to operate with the loading door open.
12. To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to
23. Always read and follow manufacturer’s
instructions on packages of laundry and cleaning
aids. Heed all warnings or precautions. To reduce
the risk of poisoning or chemical burns, keep
them out of the reach of children at all times
(preferably in a locked cabinet).
connect the washer to the electrical power source.
13. Use washer only for its intended purpose,
washing textiles.
14. Never wash machine parts or automotive parts in
the machine. This could result in serious damage
to the basket.
24. Always follow the fabric care instructions
supplied by the textile manufacturer.
15. ALWAYS disconnect the washer from electrical
supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
25. Never operate the washer with any guards and/or
panels removed.
26. DO NOT operate the washer with missing or
broken parts.
16. Install the washer according to the
INSTALLATION INSTRUCTIONS. All
connections for water, drain, electrical power and
grounding must comply with local codes and be
made by licensed personnel when required.
27. DO NOT bypass any safety devices.
28. Failure to install, maintain, and/or operate this
washer according to the manufacturer’s
17. To reduce the risk of fire, textiles which have
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
instructions may result in conditions which can
produce bodily injury and/or property damage.
NOTE: The WARNINGS and IMPORTANT
SAFETY INSTRUCTIONS appearing in this
manual are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
installing, maintaining, or operating the washer.
flammable chemicals, thinner, etc., or anything
containing wax or chemicals such as in mops and
cleaning cloths, must not be put into the washer.
These flammable substances may cause the
fabric to catch on fire by itself.
18. Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
Any problems or conditions not understood should be
reported to the dealer, distributor, service agent or the
manufacturer.
19. Keep washer in good condition. Bumping or
dropping the washer can damage safety features.
If this occurs, have washer checked by a qualified
service person.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9002062
4
Installation/Operation Supplement
WARNING
CAUTION
This machine must be installed, adjusted,
and serviced by qualified electrical
Be careful around the open door,
particularly when loading from a level
below the door. Impact with door edges
can cause personal injury.
maintenance personnel familiar with the
construction and operation of this type of
machinery. They must also be familiar
with the potential hazards involved.
Failure to observe this warning may result
in personal injury and/or equipment
SW025
WARNING
damage, and may void the warranty.
SW004
Never touch internal or external steam
pipes, connections, or components.
These surfaces can be extremely hot and
will cause severe burns. The steam must
be turned off and the pipe, connections,
and components allowed to cool before
IMPORTANT: Ensure that the recommended
clearances for inspection and maintenance
are provided. Never allow the inspection and
maintenance space to be blocked.
the pipe can be touched.
SW014
WARNING
Safety Decals
Install the machine on a level floor of
sufficient strength. Failure to do so may
result in conditions which can produce
serious injury, death and/or property
Safety decals appear at crucial locations on the
machine. Failure to maintain legible safety decals
could result in injury to the operator or service
technician.
damage.
W703
To provide personal safety and keep the machine in
proper working order, follow all maintenance and
safety procedures presented in this manual. If
questions regarding safety arise, contact the
manufacturer immediately.
Use manufacturer-authorized spare parts to avoid
safety hazards.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9002062
5
Installation/Operation Supplement
Operator Safety
WARNING
Do not bypass any safety devices in the machine.
WARNING
NEVER insert hands or objects into
basket until it has completely stopped.
Doing so could result in serious injury.
Never operate the machine with a
bypassed or disconnected balance
system. Operating the machine with
severe out-of-balance loads could result
in personal injury and serious equipment
SW012
To ensure the safety of machine operators, the
following maintenance checks must be performed
daily:
damage.
SW039
1. Prior to operating the machine, verify that all
warning signs are present and legible. Missing or
illegible signs must be replaced immediately.
Make certain that spares are available.
2. Check door interlock before starting operation of
the machine:
a. Attempt to start the machine with the door
open. The machine should not start with the
door open.
b. Close the door without locking it and attempt
to start the machine. The machine should not
start with the door unlocked.
c. Close and lock the door and start a cycle.
Attempt to open the door while the cycle is in
progress. The door should not open.
If the door lock and interlock are not functioning
properly, call a service technician.
3. Do not attempt to operate the machine if any of
the following conditions are present:
a. The door does not remain securely locked
during the entire cycle.
b. Excessively high water level is evident.
c. Machine is not connected to a properly
grounded circuit.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9002062
6
Installation/Operation Supplement
Specifications and Dimensions
General Specifications
Model
18
30
Overall Dimensions
Overall width
660 mm (26 in.)
1038 mm (40.9 in.)
739 mm (29.1 in.)
780 mm (30.7 in.)
1202 mm (47.3 in.)
842 mm (33.1 in.)
Overall height
Overall depth
Weight and Shipping Information
Net weight
211 kg (465.2 lb.)
233 kg (513.7 lb.)
325kg (716.5 lb.)
355 kg (782.6 lb.)
Shipping weight
3
3
3
3
0.8 m (22.5 ft )
1.3 m (34.7 ft )
Shipping volume
Wash Cylinder Information
Cylinder diameter
530 mm (20.9 in.)
330 mm (13 in.)
650 mm (25.6 in.)
400 mm (15.76 in.)
Cylinder depth
3
3
76 l (2.7 ft )
132 l (4.66 ft )
Cylinder volume
3 mm (0.12 in.)
3 mm (0.12 in.)
Perforation size
Door Opening Information
Door opening size
300 mm (11.8 in.)
280 mm (11 in.)
300 mm (11.8 in.)
381 mm (15 in.)
Height of door bottom above floor
Water Consumption
HOT
11 l (3 gal.)
49 l (13 gal.)
Average water consumption per cycle
Power Consumption
COLD
68 l (18 gal.)
102l l (27 gal.)
Motor
0.15 kW/hr
1.5 kW/hr
0.2 kW/hr
3 kW/hr
Average power used per cycle
Heating
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
General Specifications
Model
Drive Train Information
Number of motors in drive train
Drive motor power
18
30
1
1
1 HP (0.75 kW)
2 HP (1.5 kW)
Cylinder Speeds
10-50 RPM
85 RPM
10-50 RPM
85 RPM
Wash/reverse speed
Distribution/drain speed
Extract speed
250-1000 RPM
250-1000 RPM
Centrifugal Force Data
Wash/reverse centrifugal force
Extract centrifugal force
Balance Detection
0.03-0.74 Gs
19-296 Gs
0.04-0.91 Gs
23-363 Gs
Standard
Standard
Vibration safety switch installed
Electrical Heating (International Models Only)
Total electrical heating capacity
Electrical heating elements
9 kW
3
18 kW
6
3 kW
3 kW
Electrical heat element size
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
220 mm
(8.7 in.)
H
1038 mm
(40.9 in.)
1011 mm
(39.8 in.)
365 mm
(14.4 in.)
530 mm
(20.9 in.)
65 mm
(2.6 in.)
65 mm
(2.6 in.)
660 mm
(26 in.)
670 mm (26.3 in.)
727 mm (28.6 in.)
69 mm
(2.7 in.)
231 mm
(9.1 in.)
184 mm
(7.2 in.)
153 mm
(6 in.)
75 mm
(3 in.)
139 mm
(5.5 in.)
1
8
2
3
4
843 mm
(33.2 in.)
7
6
809 mm
(31.9 in.)
180 mm
(7 in.)
633 mm
(27.7 in.)
5
70 mm
(2.8 in.)
660 mm
(26 in.)
18 MODEL
CFD513N
1
Hot Water Connections 19 mm (.75 in.)
Power Input
Emergency Stop Button
Ventilation Tub
5
6
7
8
Drain Outlet
2
3
4
Cold Water Inlet (required) 19 mm (.75 in.)
Cold Water Inlet (required) 19 mm (.75 in.)
Fill and Supply Ventilation
Figure 1
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
220 mm
(8.7 in.)
88 mm
(3.5 in.)
H
1202 mm
(474 in.)
1175 mm
(46.3 in.)
475 mm
(18.7 in.)
648 mm
(25.5 in.)
66 mm
(2.6 in.)
66 mm
(2.6 in.)
780 mm
(30.7 in.)
760 mm (29.9 in.)
82 mm
(3.2 in.)
816 mm (32.1 in.)
332 mm
(13.1 in.)
267 mm
(10.5 in.)
200 mm
(7.9 in.)
202 mm
(8 in.)
1
2
155 mm
(6.1 in.)
8
3
4
7
5
924 mm
(36.4 in.)
35 mm
964 mm
(38 in.)
(1.4 in.)
200 mm
(7.9 in.)
849 mm
(33.5 in.)
70 mm
(2.8 in.)
6
30 MODEL
CFD514N
1
2
3
4
Hot Water Connections 19 mm (.75 in.)
Cold Water Inlet (required) 19 mm (.75 in.)
Power Input
5
6
7
8
Ventilation Tub
Drain Outlet
Cold Water Inlet (required) 19 mm (.75 in.)
Fill and Supply Ventilation
Emergency Stop Button
Figure 2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Installation
Dimensional Clearances
Machine Foundation
Table 1 shows recommended minimum clearances on
all sides of the washer-extractor.
Thoroughness of detail must be stressed with all
foundation work to ensure a stable unit installation,
eliminating possibilities of excessive vibration during
extract.
Recommended Minimum Clearances
Model
18
30
CAUTION
600 mm
(24 in.)
600 mm
(24 in.)
Minimum rear clearance
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
150 mm
(6 in.)
150 mm
(6 in.)
Minimum clearance
between machine and wall
25.4 mm 25.4 mm
(1 in.)
Minimum clearance
between machines (side)
(1 in.)
maintenance space to be blocked.
W488
419 mm
(16.5 in.) (16.5 in.)
419 mm
Minimum front clearance
(door swing)
The washer-extractor must be placed on a smooth level
surface so that the entire base of the machine is
supported and rests on the mounting surface.
Table 1
The standard installation does not require anchoring
unless mandated by state or local codes.
Kinetic energy of the cylinder and dynamic loads on
Table 2 can be used as a reference when designing
floors and foundations.
Floor Load Data
Model
18
30
1386 N/m
2592 N/m
Kinetic energy of the
cylinder
700 N/16 Hz 1000 N/16 Hz
Table 2
Dynamic bottom load
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
After the concrete has cured and the anchors are
installed, proceed as follows:
Mounting Bolt Installation
(If Required)
1. Place the washer-extractor adjacent to the
foundation. Do not attempt to move it by pushing
on the sides. Always insert a pry bar or other
device under the bottom of the frame of the
washer-extractor to move it.
1
2
3
2. Place the washer-extractor carefully over the
anchors.
3. Put bolts through the machine in the anchors and
fasten them. The diameter of the bolt must be
minimum 1/2-13 or 12 mm.To level machine, fill
the spaces between the machine base and floor
with machinery grout. Grout completely under
all frame members. Remove front and rear panels
to gain access to all frame members. Force grout
under the machine base until all voids are filled.
152 mm
(6 in.)
4. Remove the spacers carefully, allowing the
machine to settle into the wet grout.
5. Position washers and locknuts on machinery
anchor bolts and fingertighten to machine base.
4
CFS485N
6. After the grout is completely dry, tighten the
locknuts by even increments – one after the
other – until all are tightened evenly and the
machine is fastened securely to the floor.
1
2
3
4
Base Frame
Bolt
Washer
Anchor Bolt/Plug
Figure 3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
IMPORTANT: Do NOT remove panel braces. They
may be located in either the front or on the side and
Removing the Transport Block
WARNING
The machine must never be activated
before removing the transport block.
W618
To prevent damage during transportation, machine has
been equipped with a transport block. To remove,
proceed as follows:
1. Place machine on level ground.
2. Remove service panels and back panel.
3. At rear of machine, lift at bottom of motor and
remove transport block if present. Refer to
CFD34N
1
1
CFD26N
1
Transport Block (Remove)
Figure 4
1
CFD515N
1
Panel Braces
Figure 5
IMPORTANT: Do NOT lift motor by the pulley.
5. Replace all panels removed.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Voltage Designation
Electrical Specifications
Standard
Electric Heat
P
Q
X
P
380-415
200-240
200-240
380-415
200-240
200-240
50/60
50/60
50/60
50/60
50/60
50/60
3
3
3+N+PE
Not available
Not available
21
27
30
30
10/6.0
10/6.0
9
9
3+PE
2/3+PE
3+N+PE
3+PE
18
30
1/3
3
12
13
16
14/2.5 0.75
Not available
Not available
Not available
36
49
40
60
8/10.0 18
6/16.0 18
Q
X
3
1/3
2/3+PE
20
12/4.0
1.5
Not available
Table 3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Operation
Control Panel
12
2
1
2
1
12
5
5
6
7
NORMAL
PERM PRESS
95C
60C
40C
95C
60C
6
7
WASH
HOT
WARM
ADD
BLEACH
NORMAL
PERM PRESS
RINSE
SPIN
WARM
COLD
QUICK WASH
QUICK WASH
40C
30C
START
DOOR
8
9
8
9
HOT
WARM
HEAVY SOIL
DELICATE
HOT
COLD
11
11
3
4
10
3
4
10
DOMESTIC MODELS
INTERNATIONAL MODELS
CHM482R
CHM488R
1
2
3
4
5
6
Cycle 1
7
8
9
10
11
12
Cycle 7
Cycle 8
Down Edit/Change keypad
Up Edit/Change keypad
Start/Enter keypad
Display
Cycle 2
Cycle 3
Cycle 4
Cycle 5
Cycle 6
Figure 6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Operating Instructions
4. Close door by pushing door handle towards
1. Turn on main power source (circuit breaker).
2. Pull door handle away from machine to open
door. On some models it may be necessary to
CFD517N
Figure 9
5. The default wash cycle will display.
CFD516N
NOTE: Perm Press Cold 60°C is the default cycle
for coin models if none is selected.
Figure 7
3. Load to capacity whenever possible. DO NOT
NORMAL
PERM PRESS
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
WASH
HOT
WARM
ADD
BLEACH
NORMAL
PERM PRESS
RINSE
SPIN
WARM
COLD
QUICK WASH
QUICK WASH
START
DOOR
HOT
WARM
HEAVY SOIL
DELICATE
HOT
COLD
DOMESTIC MODELS
CHM48
CHM482R
95C
95C
60C
60C
40C
40C
30C
CFD53N
Figure 8
INTERNATIONAL MODELS
CHM488R
Figure 10
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
6. If desired, select a different cycle at this point
before satisfying vend. The LED indicator for
that cycle will light.
8. Add coins to machine. As each coin is added, the
vend counts down to the amount remaining.
7. Add liquid and/or powder supplies to supply
9. When applicable, add bleach to compartment 2
when the ADD BLEACH LED is lit.
a. Add detergent to compartment 1.
b. Add softener to compartment 3.
10. Press the desired wash cycle keypad.
11. Press the START keypad and the active cycle
remains the chosen wash cycle.
12. When cycle is complete, display shows “donE”.
3
1
2
B157R
B157R
1
2
3
Detergent
Bleach
Softener
Figure 11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9002062
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Disposal of Unit
This appliance is marked according to the European
directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE).
This symbol on the product or on its packaging
indicates that this product shall not be treated as
handed over to the applicable collection point for the
recycling of electrical and electronic equipment.
Ensuring this product is disposed of correctly will help
prevent potential negative consequences for the
environment and human health which could otherwise
be caused by inappropriate waste handling of this
product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact the local city office, household waste disposal
service, or the source from which the product was
purchased.
MIX1N
Figure 12
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9002062
18
|