Alliance Laundry Systems Washer F232148 User Manual

Washer-Extractors  
Cabinet Freestanding Installation and Operating Instructions  
Part No. F232148R2EN  
December 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Safety Information..............................................................................  
2
Table of  
Contents  
Installation...........................................................................................  
4
Operation............................................................................................. 21  
Disposal of Unit................................................................................... 25  
© Copyright 2007, Alliance Laundry Systems LLC  
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any  
means without the expressed written consent of the publisher.  
F232148 (EN)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Safety Information  
Precautionary statements (“DANGER,” “WARNING,”  
and “CAUTION”), followed by specific instructions,  
are found in this manual and on machine decals. These  
precautions are intended for the personal safety of the  
operator, user, servicer and those maintaining the  
machine.  
Important Safety Instructions  
WARNING  
To reduce the risk of fire, electric shock,  
serious injury or death to persons when  
using your washer, follow these basic  
precautions:  
DANGER  
W023  
DANGER indicates the presence of a  
hazard that will cause severe personal  
injury, death, or substantial property  
damage if the danger is ignored.  
1. Read all instructions before using the washer.  
2. Refer to the GROUNDING INSTRUCTIONS in  
the INSTALLATION manual for the proper  
grounding of the washer.  
3. Do not wash textiles that have been previously  
cleaned in, washed in, soaked in, or spotted with  
gasoline, dry-cleaning solvents, or other  
WARNING  
WARNING indicates the presence of a  
hazard that can cause severe personal  
injury, death, or substantial property  
damage if the warning is ignored.  
flammable or explosive substances as they give  
off vapors that could ignite or explode.  
4. Do not add gasoline, dry-cleaning solvents, or  
other flammable or explosive substances to the  
wash water. These substances give off vapors that  
could ignite or explode.  
CAUTION  
5. Under certain conditions, hydrogen gas may be  
produced in a hot water system that has not been  
used for two weeks or more. HYDROGEN GAS  
IS EXPLOSIVE. If the hot water system has not  
been used for such a period, before using a  
washing machine or combination washer-dryer,  
turn on all hot water faucets and let the water  
flow from each for several minutes. This will  
release any accumulated hydrogen gas. The gas is  
flammable; do not smoke or use an open flame  
during this time.  
CAUTION indicates the presence of a  
hazard that will or can cause minor  
personal injury or property damage if the  
caution is ignored.  
Additional precautionary statements (“IMPORTANT”  
and “NOTE”) are followed by specific instructions.  
IMPORTANT: The word “IMPORTANT” is used  
to inform the reader of specific procedures where  
minor machine damage will occur if the procedure  
is not followed.  
6. Do not allow children to play on or in the washer.  
Close supervision of children is necessary when  
the washer is used near children. This is a safety  
rule for all appliances.  
NOTE: The word “NOTE” is used to communicate  
installation, operation, maintenance or servicing  
information that is important but not hazard  
related.  
7. Before the washer is removed from service or  
discarded, remove the door to the washing  
compartment.  
8. Do not reach into the washer if the wash drum is  
moving.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
2
   
Installation/Operation Supplement  
9. Do not install or store the washer where it will be  
exposed to water and/or weather.  
19. Replace worn power cords and/or loose plugs.  
20. Be sure water connections have a shut-off valve  
and that fill hose connections are tight. CLOSE  
the shut-off valves at the end of each wash day.  
10. Do not tamper with the controls.  
11. Do not repair or replace any part of the washer, or  
attempt any servicing unless specifically  
21. Loading door MUST BE CLOSED anytime the  
washer is to fill, tumble or spin. DO NOT bypass  
the loading door switch by permitting the washer  
to operate with the loading door open.  
recommended in the user-maintenance instructions  
or in published user-repair instructions that the  
user understands and has the skills to carry out.  
12. To reduce the risk of an electric shock or fire, DO  
NOT use an extension cord or an adapter to  
22. Always read and follow manufacturer’s  
instructions on packages of laundry and cleaning  
aids. Heed all warnings or precautions. To reduce  
the risk of poisoning or chemical burns, keep  
them out of the reach of children at all times  
(preferably in a locked cabinet).  
connect the washer to the electrical power source.  
13. Use washer only for its intended purpose,  
washing textiles.  
14. ALWAYS disconnect the washer from electrical  
supply before attempting any service. Disconnect  
the power cord by grasping the plug, not the cord.  
23. Always follow the fabric care instructions  
supplied by the textile manufacturer.  
24. Never operate the washer with any guards and/or  
panels removed.  
15. Install the washer according to the  
INSTALLATION INSTRUCTIONS. All  
connections for water, drain, electrical power and  
grounding must comply with local codes and be  
made by licensed personnel when required.  
25. DO NOT operate the washer with missing or  
broken parts.  
26. DO NOT bypass any safety devices.  
16. To reduce the risk of fire, textiles which have  
traces of any flammable substances such as  
vegetable oil, cooking oil, machine oil,  
27. Failure to install, maintain, and/or operate this  
washer according to the manufacturer’s  
instructions may result in conditions which can  
produce bodily injury and/or property damage.  
flammable chemicals, thinner, etc. or anything  
containing wax or chemicals such as in mops and  
cleaning cloths, must not be put into the washer.  
These flammable substances may cause the  
fabric to catch on fire by itself.  
NOTE: The WARNING and IMPORTANT  
SAFETY INSTRUCTIONS appearing in this  
manual are not meant to cover all possible  
conditions and situations that may occur. Common  
sense, caution and care must be exercised when  
installing, maintaining, or operating the washer.  
17. Do not use fabric softeners or products to  
eliminate static unless recommended by the  
manufacturer of the fabric softener or product.  
18. Keep washer in good condition. Bumping or  
dropping the washer can damage safety features.  
If this occurs, have washer checked by a qualified  
service person.  
Any problems or conditions not understood should be  
reported to the dealer, distributor, service agent or the  
manufacturer.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
3
Installation/Operation Supplement  
Installation  
General Specifications  
V-Computer  
SF18VNV, SF25VNV, UF18VNV, and  
UF25VNV Models  
Refer to Table 1.  
18 Pound  
Overall Dimensions  
25 Pound  
Overall width, mm (in.)  
Overall height, mm (in.)  
Overall depth, mm (in.)  
737 (29.0)  
1168 (46.0)  
833 (32.8)  
813 (32.0)  
1232 (48.5)  
940 (37.0)  
Weight and Shipping Information  
Net weight, kg (lbs.)  
250 (550)  
250 (550)  
318 (700)  
341 (750)  
N/A  
Domestic shipping weight, kg (lbs.)  
3
3
Domestic shipping volume, m (ft )  
Export shipping weight, kg (lbs.)  
0.98 (34.6)  
272 (600)  
363 (800)  
N/A  
3
3
Export shipping volume, m (ft )  
1.17 (41.44)  
Wash Cylinder Information  
533 (21.0)  
Cylinder diameter, mm (in.)  
Cylinder depth, mm (in.)  
610 (24.0)  
406 (16.0)  
119 (4.19)  
4,77 (0.188)  
23  
349 (13.75)  
3
Cylinder volume, l (ft )  
78 (2.76)  
Perforation size, mm (in.)  
4.77 (0.188)  
Perforation open area, %  
23  
Load capacity (dry cloth weight), kg (lbs.)  
8.16 (18)  
11.34 (25)  
Door Opening Information  
305 (12.0)  
Door opening size, mm (in.)  
364 (14.345)  
511 (20.1)  
Height of door bottom above floor, mm (in.)  
518 (20.4)  
Water Consumption  
Average water consumption  
per cycle, l (gal.)  
HOT  
87 (23)  
42 (11)  
106 (28)  
49 (13)  
COLD  
Table 1 (Continued)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Installation/Operation Supplement  
25 Pound  
Table 1 (Continued)  
18 Pound  
Power Consumption  
Average power used per cycle, kWh  
Nominal sound emission, dBA  
0.2  
58  
0.3  
Data not available  
113 (450)  
Average HVAC load, kcal/hr (Btu/hr)  
101 (400)  
Drive Train Information  
Number of motors in drive train  
Drive motor power, kW (HP)  
1
1
0.75 (1.0)  
1.50 (2.0)  
Cylinder Speeds  
Low wash/reverse speed, RPM  
Normal wash/reverse speed, RPM  
Distribution speed, RPM  
Extract l, RPM  
29  
27  
49  
52  
86  
73  
534  
500  
641  
1011  
Extract 2, RPM  
685  
Extract 3, RPM  
1080  
Centrifugal Force Data  
Low wash/reverse centrifugal force, Gs  
Normal wash/reverse centrifugal force, Gs  
Distribution centrifugal force, Gs  
Extract 1 centrifugal force, Gs  
0.25  
0.80  
0.80  
1.80  
85  
0.80  
2.20  
85  
Extract 2 centrifugal force, Gs  
140  
140  
348  
Extract 3 centrifugal force, Gs  
348  
Load Balancing  
AC drive  
Balance detection system  
AC drive  
Direct Steam Heating (Optional)  
DN15 (1/2 NPT)  
Steam inlet connection size, mm (in.)  
Number of steam inlets  
DN15 (1/2 NPT)  
1
1
Steam required to  
raise bath temperature  
10 °C, kg (10 °F, lb.)  
LOW  
MED  
HIGH  
0.81 (1.13)  
0.90 (1.25)  
1.04 (1.45)  
11.7 (0.75)  
1.05 (1.46)  
1.16 (1.61)  
1.33 (1.85)  
15 (0.96)  
Average steam use per cycle, kg (bhp)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
WE-6 Computer  
SF35PV, SF50PV, SF85PV, UF35PV,  
UF50PV, and UF85PV Models  
Refer to Table 2.  
35 Pound  
50 Pound  
85 Pound  
Overall Dimensions  
Overall width, mm (in.)  
Overall height, mm (in.)  
Overall depth, mm (in.)  
889 (35)  
1407 (55.4)  
992 (39)  
990 (39)  
1514 (59.6Z)  
1049 (41.3)  
1181 (46.5)  
1781 (70.1)  
1270 (50)  
Weight and Shipping Information  
550 (1212)  
Net weight, kg (lbs.)  
726 (1600)  
749(1650)  
2.26 (80)  
1362 (3000)  
1407 (3100)  
3.46 (123)  
Domestic shipping weight, kg (lbs.)  
572 (1260)  
1.80 (63.6)  
580 (1275)  
1.85 (65.3)  
3
3
Domestic shipping volume, m (ft )  
Export shipping weight, kg (lbs.)  
1750 (795)  
2.36 (83.5)  
3200 (1453)  
3.86 (137)  
3
3
Export shipping volume, m (ft )  
Wash Cylinder Information  
Cylinder diameter, mm (in.)  
Cylinder depth, mm (in.)  
668 (26.25)  
467 (18.375)  
164 (5.79)  
0.188 (4.77)  
23  
762 (30)  
508 (20)  
232 (8.19)  
0.188 (4.77)  
23  
914 (36)  
61 (240)  
400 (14.1)  
4.77 (0.188)  
23  
3
Cylinder volume, l (ft )  
Perforation size, mm (in.)  
Perforation open area, %  
Door Opening Information  
Door opening size, mm (in.)  
354 (13.9)  
636 (25)  
413 (16.25)  
23 (585)  
445 (17.5)  
32.7 (831)  
Height of door bottom above floor, mm (in.)  
Water Consumption  
Average water consumption per cycle, l (gal.)  
Average hot water consumed per hour, l (gal.)  
HOT  
47 (178)  
79 (21)  
216 (57)  
98 (26)  
407 (108)  
190 (50)  
579 (153)  
COLD  
276 (73)  
322 (85)  
Power Consumption  
Average power used per cycle, kWh  
Average HVAC load, kcal/hr (Btu/hr)  
Nominal sound emission, dBA  
Background noise level, dBA  
0.4  
125 (500)  
70  
0.6  
213 (850)  
76  
0.9  
300 (1200)  
75  
54  
49  
55  
Drive Train Information  
Number of motors in drive train  
Drive motor power, kW (HP)  
1
1
1
2.2 (3)  
3.7 (5.0)  
5.6 (7.5)  
Table 2 (Continued)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
Table 2 (Continued)  
35 Pound  
50 Pound  
85 Pound  
Cylinder Speeds  
Gentle wash/reverse speed, RPM  
Wash/reverse speed, RPM  
Distribution/drain speed, RPM  
Medium extract speed, RPM  
High extract speed l, RPM  
High extract speed 2, RPM  
High extract speed 3, RPM  
26  
43  
26  
40  
26  
41  
77  
73  
65  
325  
475  
610  
960  
305  
445  
575  
900  
280  
410  
525  
825  
Centrifugal Force Data  
Gentle wash/reverse centrifugal force, Gs  
Wash/reverse centrifugal force, Gs  
Distribution/drain centrifugal force, Gs  
Medium extract centrifugal force, Gs  
High extract 1 centrifugal force, Gs  
High extract 2 centrifugal force, Gs  
High extract 3 centrifugal force, Gs  
0.25  
0.69  
2.2  
0.29  
0.68  
2.3  
0.345  
0.858  
2.16  
40  
40  
40  
85  
84  
85.8  
141  
140  
345  
141  
345  
348  
Balance Detection  
Vibration safety switch installed  
Standard  
Standard  
Standard  
Direct Steam Heating (Optional)  
Steam inlet connection size, mm (in.)  
Number of steam inlets  
DN15  
DN15 (0.5)  
DN15 (0.5)  
1
DN15 (0.5)  
1
1
Steam required to raise bath temperature  
10°C, kg (10°F, lb.)  
LOW  
MED  
HIGH  
2.22 (1.6)  
2.52 (1.81)  
2.84 (2.04)  
1.47 (23)  
2.91 (2.42)  
2.42 (3.46)  
2.73 (3.80)  
1.95 (30.6)  
3.8 (5.2)  
4.3 (5.9)  
4.9 (6.9)  
54.9 (3.5)  
Average steam use per cycle, kg (bhp)  
Electric Heating (Optional)  
15.6  
Total electric heating capacity, kW  
Number of electrical heat elements  
Electrical heat element size, kW  
23.4  
9
31.2  
12  
6
2.6  
2.6  
2.6  
Time required to raise bath temperature  
10°C, min. (10°F, min.)  
LOW  
MED  
HIGH  
3.9 (2.6)  
4.5 (2.9)  
5.0 (3.3)  
3.6 (2.4)  
4.2 (2.7)  
4.7 (3.1)  
3.1 (4.8)  
3.5 (5.4)  
6.4 (4.1)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
SF135PV, SF250PV, UF135PV, and  
UF250PV Models  
Refer to Table 3.  
135 Pound  
Standard  
250 Pound  
ForwardTilt  
Option  
Two-Way  
Tilt Option  
Standard  
Overall Dimensions  
1803 (71)  
Overall width, mm (in.)  
Overall height, mm (in.)  
Overall depth, mm (in.)  
1957 (77)  
2083 (82)  
2235 (88)  
2006 (79)  
2235 (88)  
2243 (88.3)  
2006 (79)  
2235 (88)  
2311 91()  
1829 (75)  
1537 (60.5)  
Weight and Shipping Information  
Net weight, kg (lbs.)  
1818 (4000)  
1909 (4200)  
3661 (8070)  
4000 (8800)  
4000 (8800)  
11.5 (409)  
4355 (9600)  
4445 (9800)  
11.5 (409)  
Domestic shipping weight, kg (lbs.)  
3951 (8270)  
11.5 (409)  
3860 (8500)  
11.5 (409)  
3
3
Domestic shipping volume, m (ft )  
Export shipping weight, kg (lbs.)  
6.35 (227)  
2045 (4500)  
4227 (9300) 4581 (10,100)  
3
3
Export shipping volume, m (ft )  
6.39 (248)  
11.5 (409)  
11.5 (409)  
Wash Cylinder Information  
1092 (43)  
Cylinder diameter, mm (in.)  
Cylinder depth, mm (in.)  
1321 (52)  
813 (32)  
1114 (39.3)  
4.76 (0.188)  
20  
1321 (52)  
813 (32)  
1114 (39.3)  
4.76 (0.188)  
20  
1321 (52)  
813 (32)  
1114 (39.3)  
4.76 (0.188)  
20  
635 (25)  
3
Cylinder volume, l (ft )  
596 (21.0)  
Perforation size, mm (in.)  
Perforation open area, %  
4.77 (0.188)  
23  
Door Opening Information  
584 (23)  
Door opening size, mm (in.)  
724 (28.5)  
784 (30.9)  
724 (28.5)  
937 (36.9)  
724 (28.5)  
937 (36.9)  
Height of door bottom above floor, mm (in.)  
718 (28.25)  
Water Consumption  
Average water consumption per cycle, l (gal.)  
Average hot water consumed per hour, l (gal.)  
HOT  
590 (156)  
437 (116)  
1023 (270)  
905 (239)  
424 (112)  
1355 (358)  
905 (239)  
424 (112)  
1355 (358)  
905 (239)  
424 (112)  
1355 (358)  
COLD  
Power Consumption  
Average power used per cycle, kWh  
Average HVAC load, kcal/hr (Btu/hr)  
Nominal sound emission, dBA  
0.9  
375 (1500)  
75  
1.5 (Est.)  
550 (2200)  
75  
1.5 (Est.)  
550 (2200)  
N/A  
1.5 (Est.)  
550 (2200)  
N/A  
Drive Train Information  
Number of motors in drive train  
Drive motor power, kW (HP)  
1
7.5 (10)  
1
1
1
18.5 (25)  
18.5 (25)  
18.5 (25)  
Table 3 (Continued)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation/Operation Supplement  
250 Pound  
Table 3 (Continued)  
135 Pound  
ForwardTilt  
Option  
Two-Way  
Tilt Option  
Standard  
Standard  
Cylinder Speeds  
1/2 Wash/reverse speed, RPM  
Wash/reverse speed, RPM  
Distribution speed, RPM  
Medium extract speed, RPM  
High extract speed l, RPM  
High extract speed 2, RPM  
High extract speed 3, RPM  
26  
21  
31  
21  
31  
21  
31  
36  
62  
54  
54  
54  
170  
140  
340  
435  
650  
140  
340  
435  
650  
140  
340  
435  
650  
375  
480  
715  
Centrifugal Force Data  
1/2 Wash/reverse centrifugal force, Gs  
Wash/reverse centrifugal force, Gs  
Distribution centrifugal force, Gs  
Medium extract centrifugal force, Gs  
High extract 1 centrifugal force, Gs  
High extract 2 centrifugal force, Gs  
High extract 3 centrifugal force, Gs  
0.412  
0.325  
0.708  
2.15  
14.7  
86.9  
142  
0.325  
0.708  
2.15  
14.7  
86.9  
142  
0.325  
0.708  
2.15  
14.7  
86.9  
142  
0.790  
2.34  
17.6  
85.8  
141  
312  
318  
318  
318  
Balance Detection  
Standard  
Vibration safety switch installed  
Standard  
Standard  
Standard  
Direct Steam Heating (Optional)  
Steam inlet connection size, mm (in.)  
Number of steam inlets  
DN19 (0.75)  
1
DN25 (1.0)  
DN25 (1.0)  
1
DN25 (1.0)  
1
1
Steam required to raise bath temperature  
10 °C, kg (10 ° F, lb.)  
LOW  
3.11 (6.84)  
4.40 (9.67)  
4.78  
5.23 (11.5)  
7.91 (17.4)  
9.0  
5.23 (11.5)  
17.4 (7.91)  
9.0  
5.23 (11.5)  
17.4 (7.91)  
9.0  
HIGH  
Average steam use per cycle, bhp  
Electric Heating (Optional)  
Total electric heating capacity, kW  
Number of electrical heat elements  
Electrical heat element size, kW  
45  
18  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
N/A  
2.5  
Time required to raise bath temperature  
10°C, min. (10°F, min.)  
LOW  
5.0 (3.2)  
6.4 (4.2)  
HIGH  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Dimensional Clearances  
NOTE: The dimensions shown here are for  
planning purposes only. They are approximate and  
subject to normal manufacturing tolerances. If  
exact dimensions are required for construction  
purposes, contact the distributor or manufacturer.  
We reserve the right to make changes at any time  
without notice.  
V-Computer  
SF18VNV, SF25VNV, UF18VNV, and  
UF25VNV Models  
Both single and multiple machine installations require  
specified minimum clearances on all sides of each  
machine. Tables below show these clearances.  
Recommended Minimum Clearances  
18 Pound  
305 (12)  
50 (2)  
25 Pound  
305 (12)  
50 (2)  
Minimum rear clearance, mm (in.)  
Minimum clearance between machine and wall, mm (in.)  
Minimum clearance between machines (side), mm (in.)  
Minimum front clearance, mm (in.)  
25 (1)  
25 (1)  
406 (16)  
445 (17.5)  
Table 4  
WE-6 Computer  
SF35-85PV, UF35-85PV, SF135-250PV, and  
UF135-250PV Models  
Recommended Minimum Clearances  
135  
Pound  
250 Pound  
35  
Pound  
50  
Pound  
85  
Pound  
Forward  
Tilt  
Option*  
Two-Way  
Tilt  
Option*  
Standard Standard  
Minimum rear clearance,  
mm (in.)  
450 (18)  
150 (6)  
450 (18)  
150 (6)  
450 (18)  
150 (6)  
610 (24)  
457 (18)  
457 (18)  
584 (23)  
610 (24)  
457 (18)  
457 (18)  
914 (36)  
914 (36)  
457 (18)  
457 (18)  
914 (36)  
914 (36)  
457 (18)  
457 (18)  
914 (36)  
Minimum clearance between  
machine and wall, mm (in.)  
Minimum clearance between  
machines (side), mm (in.)  
25.4 (1)  
533 (21)  
25.4 (1)  
584 (23)  
25.4 (1)  
584 (23)  
Minimum front clearance,  
mm (in.)  
* Machines equipped with the tilt option require a minimum overhead clearance as well. Refer to Figure 7 for the minimum  
overhead clearance for the 250 pound capacity model with tilt option.  
Table 5  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installation/Operation Supplement  
Dimensions  
V-Computer  
SF18VNV, UF18VNV, SF25VNV, and  
UF25VNV Models  
G
D
H
A
B
C
E
K
L
J
I
F
Front  
Left Side  
M
N
S
O
R
Q
P
Rear  
CFS452N  
CFS425N  
Figure 1  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installation/Operation Supplement  
18 Pound  
25 Pound  
659 mm (26 in.)  
492 mm (19-13/32 in.)  
440 mm (17-5/16 in.)  
686 mm (27 in.)  
508 mm (20 in.)  
432 mm (17 in.)  
A
B
C
D
E
F
1161 mm (45-23/32 in.) 1232 mm (48-1/2 in.)  
686 mm (27 in.)  
737 mm (29 in.)  
762 mm (30 in.)  
813 mm (32 in.)  
18 mm (23/32 in.)  
1143 mm (45 in.)  
18 mm (23/32 in.)  
1214 mm (47-13/16 in.)  
25 mm (1 in.)  
G
H
I
25 mm (1 in.)  
774 mm (30-1/2 in.)  
709 mm (27-15/16 in.)  
33 mm (1-5/16 in.)  
530 mm (20-29/32 in.)  
430 mm (16-29/32 in.)  
876 mm (34-1/2 in.)  
816 mm (32-1/8 in.)  
38 mm (1-1/2 in.)  
597 mm (23-1/2 in.)  
495 mm (19-1/2 in.)  
J
K
L
M
N
O
P
Q
R
S
1074 mm (42-5/16 in.) 1074 mm (42-5/16 in.)  
173 mm (6-13/16 in.)  
86 mm (3-13/32 in.)  
1029 mm (40-1/2 in.)  
114 mm (4-1/2 in.)  
211 mm (8-5/16 in.)  
86 mm (3-13/32 in.)  
1067 mm (42 in.)  
4-13/16 in. (122 mm)  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
WE-6 Computer  
SF35PV and UF35PV Models  
814 mm  
(32")  
638 mm  
(25 1/10")  
559 mm  
(22")  
889 mm  
(35")  
992 mm  
(39")  
Front  
Side  
828 mm  
(32 3/5")  
1
813 mm  
(32")  
2
606 mm  
(23 9/10")  
3
1408 mm  
(55 2/5")  
1255 mm  
(49 2/5")  
1323 mm  
(52 1/10")  
1031 mm  
(40 3/5")  
300 mm  
(11 4/5")  
209 mm  
(8 1/5")  
279 mm  
(11")  
4
5
Rear  
B145I  
1
2
3
Cold Water  
Hot Water  
Steam Inlet  
4
5
76 mm (3 in.) Reuse Drain Outlet  
76 mm (3 in.) Drain Outlet  
Figure 2  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation/Operation Supplement  
SF50PV, UF50PV, SF85PV, and  
UF85PV Models  
A
B
C
D
E
Side  
Front  
1
2
F
G
3
H
I
J
N
M
4
5
K
L
Rear  
B146I  
1
2
3
Cold Water  
Hot Water  
Steam Inlet  
4
5
76 mm (3 in.) Reuse Drain Outlet  
76 mm (3 in.) Drain Outlet  
Figure 3  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
50 Pound  
85 Pound  
872 mm (34-3/10 in.)  
26-1/5 in. (666 mm)  
582 mm (22-9/10 in.)  
991 mm (39 in.)  
1054 mm (41-1/2 in.)  
831 mm (32-7/10 in.)  
765 mm (30-1/10 in.)  
1181 mm (46-1/2 in.)  
1270 mm (50 in.)  
A
B
C
D
E
F
1049 mm (41-3/10 in.)  
930 mm (36-3/5 in.)  
889 mm (35 in.)  
1107 mm (43-3/5 in.)  
1083 mm (42-3/5 in.)  
758 mm (29-9/10 in.)  
1781 mm (70-1/10 in.)  
1685 mm (66-2/5 in.)  
254 mm (10 in.)  
G
H
I
619 mm (24-2/5 in.)  
1513 mm (59-3/5 in.)  
1399 mm (55-1/10 in.)  
260 mm (10-1/5 in.)  
260 mm (10-1/5 in.)  
300 mm (11-4/5 in.)  
1136 mm (44-7/10 in.)  
J
K
L
197 mm (7-3/4 in.)  
281 mm (11-1/10 in.)  
1328 mm (52-3/8 in.)  
M
N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
135 Pound Capacity Models  
1905 mm  
(75")  
1664 mm  
(65 1/2")  
1060 mm  
(41 3/4")  
768 mm  
(30 1/4")  
1575 mm  
(62")  
718 mm  
(28 1/4")  
1549 mm  
(61")  
1803 mm  
(71")  
1491 mm  
(58 11/16")  
Front  
Side  
1457 mm  
(57 5/16")  
3
4
2
1
1376 mm  
(54 3/16")  
5
6
992 mm  
(39 3/32")  
952 mm  
(37 1/2")  
913 mm  
(35 29/32")  
584 mm  
(23")  
529 mm  
(20 13/16")  
10  
9
1803 mm  
(71")  
1468 mm  
(57 13/16")  
1430 mm  
(56 5/16")  
1829 mm  
(72")  
1435 mm  
(56 1/2")  
1715 mm  
(67 1/2")  
509 mm  
(20 1/16")  
521 mm  
(20 1/2")  
171 mm  
(6 3/4")  
7
Rear  
8
R012I  
1
2
3
4
5
Recirculation Port  
Extra Fill Valve  
Cold Water Inlet  
Vent  
6
7
8
9
10  
Steam Inlet  
Drain Outlet  
Reuse Drain Outlet  
Main Power  
Hot Water Inlet  
External Supply Signal  
Figure 4  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
250 Pound Capacity Models  
721 mm  
(28 3/8")  
559 mm  
(22")  
2083 mm  
(82")  
1207 mm  
(47 1/2")  
1740 mm  
(68 1/2")  
829 mm  
(32 5/8")  
483 mm  
(19")  
1034 mm  
(40 11/16")  
483 mm  
(19")  
784 mm  
(30 7/8")  
1829 mm  
(72")  
2037 mm  
(80 3/16")  
1957 mm  
(77 1/16")  
1744 mm  
(68 11/16")  
1639 mm  
(64 1/2")  
Front  
Side  
292 mm  
(11 1/2")  
1615 mm  
(63 5/8")  
1
3
2
4
5
1198 mm  
(47 3/16")  
1096 mm  
(43 3/16")  
6
912 mm  
(35 29/32")  
10  
9
712 mm  
(28")  
1997 mm  
(78 5/8")  
1960 mm  
(77 3/16")  
1584 mm  
(62 3/8")  
1763 mm  
(69 13/32")  
1530 mm  
(60 1/4")  
218 mm  
(8 5/8")  
1446 mm  
(59 29/32")  
572 mm  
(22 1/2")  
572 mm  
(22 1/2")  
8
7
Rear  
R070I  
1
2
3
4
5
Recirculation Port  
Extra Fill Valve  
Hot Water Inlet  
Vent  
6
7
8
9
10  
Steam Inlet  
Drain Outlet  
Reuse Drain Outlet  
External Supply Signal  
Main Power  
Cold Water Inlet  
Figure 5  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
250 Pound Capacity Models  
with Forward Tilt or Two-Way Tilt Option  
H
I
J
A
B
G
F
E
C
D
K
4
3
2
1
L
Front  
Side  
M
N
5
O
P
9
Q
R
8
AA  
S
T
Z
Y
U
X
V
6
W
7
Rear  
R074IE3A  
1
2
3
4
5
Recirculation Port  
Extra Fill Valve  
Hot Water Inlet  
Vent  
6
7
8
9
Drain Outlet  
Reuse Drain Outlet  
External Supply Signal  
Main Power  
Cold Water Inlet  
Figure 6  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
Forward Tilt  
Two-Way Tilt  
2235 mm (88 in.)  
2235 mm (88 in.)  
A
B
C
D
E
F
1736 mm (74-13/32 in.) 1736 mm (74-13/32 in.)  
1930 mm (76 in.)  
2057 mm (81 in.)  
1930 mm (76 in.)  
2006 mm (79 in.)  
936 mm (36-7/8 in.)  
981 mm (38-19/32 in.)  
1359 mm (53-1/2 in.)  
936 mm (36-7/8 in.)  
981 mm (38-5/8 in.)  
1359 mm (53-1/2 in.)  
G
H
I
2037 mm (80-3/16 in.) 2037 mm (80-3/16 in.)  
721 mm (28-3/8 in.)  
559 mm (22 in.)  
721 mm (28-3/8 in.)  
559 mm (22 in.)  
J
2254 mm (88-3/4 in.)  
2311 mm (91 in.)  
K
L
1174 mm (68-11/16 in.) 1174 mm (68-11/16 in.)  
1639 mm (64-1/2 in.)  
1615 mm (63-5/8 in.)  
1639 mm (64-1/2 in.)  
1615 mm (63-5/8 in.)  
M
N
O
P
Q
R
S
T
1198 mm (47-3/16 in.) 1198 mm (47-3/16 in.)  
1096 mm (43-3/16 in.) 1096 mm (43-3/16 in.)  
912 mm (35-29/32 in.) 912 mm (35-29/32 in.)  
712 mm (28 in.)  
2121 mm (83-1/2 in.)  
1930 mm (76 in.)  
712 mm (28 in.)  
2121 mm (83-1/2 in.)  
1930 mm (76 in.)  
1613 mm (63-1/2 in.)  
1613 mm (63-1/2 in.)  
U
V
W
X
Y
Z
620 mm (24-13/32 in.) 620 mm (24-13/32 in.)  
620 mm (24-13/32 in.) 620 mm (24-13/32 in.)  
370 mm (14-5/8 in.)  
1683 mm (66-1/4 in.)  
1737 mm (68-3/8 in.)  
2149 mm (84-5/8 in.)  
370 mm (14-5/8 in.)  
1683 mm (66-1/4 in.)  
1737 mm (68-3/8 in.)  
2149 mm (84-5/8 in.)  
AA  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation/Operation Supplement  
250 Pound Capacity Models  
with Forward and Two-Way Tilt Option  
13°  
13°  
2622 mm  
(103 1/4")  
330 mm  
(13")  
330 mm  
(13")  
914 mm (36") Recommended  
762 mm (30") Allowable  
475 mm (18")  
Compacted fill dirt  
CFS219N  
Figure 7  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation/Operation Supplement  
Operation  
5. Load to capacity whenever possible. DO NOT  
V-Computer  
OVERLOAD. Refer to Figure 10.  
1. Turn on main power source (circuit breaker).  
2. Turn on the ON/OFF switch on the front panel to  
the ON position. Refer to Figure 9.  
3. Push button and turn handle clockwise. Refer to  
U003IE1A  
Figure 10  
6. Close door and turn handle counterclockwise  
until button pops out. Refer to Figure 11.  
U001IE1B  
Figure 8  
4. Press and hold the DOOR UNLOCK button on  
the left side of the control panel while performing  
the above step. Refer to Figure 8 and Figure 9.  
1
2
U005IE1B  
Figure 11  
CFS1N  
1
2
DOOR UNLOCK Button  
ON/OFF Switch  
Figure 9  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
21  
           
Installation/Operation Supplement  
7. Add liquid and/or powder supplies to supply  
dispenser. Refer to Figure 12.  
a. Add detergent to container 1.  
b. Add detergent or bleach to container 2.  
c. Add softener to container 3.  
3
2
4
1
CYCLE SELECTION  
NOTE: Liquid supplies may be injected directly  
into the supply dispenser by an external chemical  
supply dispenser. Refer to Installation and  
Programming manuals.  
8. Press the START key. Refer to Figure 13.  
B159R  
1
Up  
2
3
4
Down  
Start  
Stop  
3
1
Figure 13  
10. When applicable, add bleach when the display  
reads “bLCH”. Refer to Figure 14.  
2
B163R  
1
2
3
Detergent Container  
Detergent or Bleach Container  
Softener Container  
CYCLE SELECTION  
Figure 12  
9. Press the UP and DOWN keys to select wash  
cycle. Press the START key. Refer to Figure 13.  
B160R  
Figure 14  
NOTE: To stop a cycle at any time, press the STOP  
key.  
NOTE: To display the temperature of the water  
while a cycle is running, press the UP key. To  
display the number of the cycle in progress, press  
the START key.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
22  
     
Installation/Operation Supplement  
NOTE: For models with tilt, refer to “Loading  
Using Tilt Option” at the end of this section.  
WE-6 Computer  
1. Turn on main power source (circuit breaker).  
4. Close door and turn handle clockwise until it  
locks.  
2. Use left hand to press and hold the door unlock  
button on top of the door box cover. Use right  
hand to turn door handle counterclockwise and  
open door. Refer to Figure 15.  
5. Add powder supplies to supply dispenser.  
NOTE: Liquid supplies may be injected directly  
into the supply dispenser by an external chemical  
supply dispenser. Refer to Installation and  
Programming manuals.  
6. Select wash cycle from cycle charts located in the  
Programming section of the Programming  
Manual.  
7. Enter the cycle number, 01-39, on the keypad.  
Refer to Figure 17.  
U153R  
Output Indicators  
Supply 1  
Supply 2  
Supply 3  
Supply 4  
Supply 5  
Cold Fill  
Hot Fill  
Heat  
Forward  
Reverse  
Figure 15  
Dist. Speed  
Med. Speed  
High Speed  
Unlock Door  
Drain Closed  
Auxiliary 1  
Auxiliary 2  
3. Load to capacity whenever possible. DO NOT  
OVERLOAD. Refer to Figure 16.  
Spare  
Spare  
Signal  
U
U152R  
Figure 17  
8. Press the START key. Refer to Figure 17.  
9. When cycle is complete and the display reads  
“DONE”, open door by pressing and holding the  
door unlock button.  
A  
10. Unload.  
U003IE1A  
Figure 16  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
F232148 (EN)  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Installation/Operation Supplement  
Loading Using Tilt Option  
Forward Tilt Machines  
1. Open loading door and secure it to the door latch  
on the right side of the machine.  
Two-Way Tilt Machines  
1. Open loading door and secure it to the door latch  
on the right side of the machine.  
2. Check that selector on the pendant switch is in  
the CENTER position. If machine is in the  
FORWARD position, turn the selector to the  
CENTER position. While holding down the  
ENABLE button, press the REVERSE button to  
center the machine.  
2. Turn the selector on the pendant switch left to the  
REVERSE position. Refer to Figure 18.  
3. Load the machine.  
4. Unlatch and close loading door.  
Unloading Using Tilt Option  
1
Forward and Two-Way Tilt Machines  
ENABLE  
FORWARD  
REVERSE  
1. Open loading door and secure it to the door latch  
on the right side of the machine.  
2. Turn the selector on the pendant switch right to  
the FORWARD position. Refer to Figure 18.  
3. While holding down the ENABLE button, press  
the FORWARD button to tilt forward.  
4. Unload the machine.  
5. Turn the selector back to the CENTER position  
to lower the machine.  
6. Unlatch and close loading door.  
U150R  
1
Selector Dial  
Figure 18  
3. While holding down the ENABLE button, press  
the REVERSE button to tilt backward.  
4. Load the machine.  
5. Turn the selector back to the CENTER position  
to lower the machine.  
6. Unlatch and close loading door.  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
24  
     
Installation/Operation Supplement  
Disposal of Unit  
This appliance is marked according to the European  
directive 2002/96/EC on Waste Electrical and  
Electronic Equipment (WEEE).  
This symbol on the product or on its packaging  
indicates that this product shall not be treated as  
household waste. Refer to Figure 19. Instead it shall be  
handed over to the applicable collection point for the  
recycling of electrical and electronic equipment.  
Ensuring this product is disposed of correctly will help  
prevent potential negative consequences for the  
environment and human health which could otherwise  
be caused by inappropriate waste handling of this  
product. The recycling of materials will help to  
conserve natural resources. For more detailed  
information about recycling of this product, please  
contact the local city office, household waste disposal  
service, or the source from which the product was  
purchased.  
MIX1N  
Figure 19  
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F232148 (EN)  
25  
   
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch Switches Hub User Manual
3D Connexion Refrigerator LST42B User Manual
Acer Flat Panel Television AT1935 User Manual
ADTX Work Light PLUS 90 User Manual
Allied Telesis Power Supply AT WDRPS 80 User Manual
Alto Shaam Food Warmer EC2 48 Series User Manual
American DJ Work Light Jewel User Manual
American Standard Outdoor Shower 1660650 User Manual
Atmel Computer Hardware ATA5283 User Manual
Audiovox Remote Starter APS 57N User Manual