Washer-Extractors
Cabinet Hardmount Operating Instructions
This manual is only a
Supplement. Refer to
Installation Manualand
Operation/Maintenance
Manual for full
instructions.
CHM166C
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F232145R6EN
November 2005
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Safety Information..............................................................................
3
Table of
Contents
Specifications and Dimensions...........................................................
Gap Setting for Vibration Switch
5
Models)...............................................................................................
8
Dimensions ........................................................................................... 17
125 Model ........................................................................................ 19
Electrical Specifications ....................................................................... 20
Operation............................................................................................. 25
© Copyright 2005, Alliance Laundry Systems LLC
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Notes
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
F232145 (EN)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Safety Information
Precautionary statements (“DANGER,” “WARNING,”
Important Safety Instructions
and “CAUTION”), followed by specific instructions,
are found in this manual and on machine decals. These
precautions are intended for the personal safety of the
operator, user, servicer, and those maintaining the
machine.
WARNING
To reduce the risk of fire, electric shock,
serious injury or death to persons when
using your washer, follow these basic
precautions:
DANGER
W023
DANGER indicates the presence of a
hazard that will cause severe personal
injury, death, or substantial property
damage if the danger is ignored.
1. Read all instructions before using the washer.
2. Refer to the Grounding Instructions in the
Installation Manual for the proper grounding of
the washer.
3. Do not wash textiles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, kerosene, waxes, cooking oils,
dry-cleaning solvents, or other flammable or
explosive substances as they give off vapors that
could ignite or explode.
WARNING
WARNING indicates the presence of a
hazard that can cause severe personal
injury, death, or substantial property
damage if the warning is ignored.
4. Do not add gasoline, dry-cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
CAUTION
CAUTION indicates the presence of a
hazard that will or can cause minor
personal injury or property damage if the
caution is ignored.
5. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using a
washing machine or combination washer-dryer,
turn on all hot water faucets and let the water
flow from each for several minutes. This will
release any accumulated hydrogen gas. The gas is
flammable; do not smoke or use an open flame
during this time.
Additional precautionary statements (“IMPORTANT”
and “NOTE”) are followed by specific instructions.
IMPORTANT: The word “IMPORTANT” is used
to inform the reader of specific procedures where
minor machine damage will occur if the procedure
is not followed.
6. Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children. This is a safety
rule for all appliances.
NOTE: The word “NOTE” is used to communicate
installation, operation, maintenance or servicing
information that is important but not hazard
related.
7. Before the washer is removed from service or
discarded, remove the door to the washing
compartment.
8. Do not reach into the washer if the wash drum is
moving.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Installation/Operation Supplement
9. Do not install or store the washer where it will be
exposed to water and/or weather.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve
and that fill hose connections are tight. CLOSE
the shut-off valves at the end of each wash day.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer,
or attempt any servicing unless specifically
21. Loading door MUST BE CLOSED any time the
washer is to fill, tumble or spin. DO NOT
recommended in the user-maintenance instructions
or in published user-repair instructions that the
user understands and has the skills to carry out.
bypass the loading door switch by permitting the
washer to operate with the loading door open.
12. To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to
22. Always read and follow manufacturer’s
instructions on packages of laundry and cleaning
aids. Heed all warnings or precautions. To reduce
the risk of poisoning or chemical burns, keep
them out of the reach of children at all times
(preferably in a locked cabinet).
connect the washer to the electrical power source.
13. Use washer only for its intended purpose,
washing clothes.
14. ALWAYS disconnect the washer from electrical
supply before attempting any service. Disconnect
the power cord by grasping the plug, not the cord.
23. Always follow the fabric care instructions
supplied by the textile manufacturer.
24. Never operate the washer with any guards
and/or panels removed.
15. Install the washer according to the Installation
Instructions. All connections for water, drain,
electrical power and grounding must comply
with local codes and be made by licensed
personnel when required.
25. DO NOT operate the washer with missing or
broken parts.
26. DO NOT bypass any safety devices.
16. To reduce the risk of fire, textiles which have
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
27. Failure to install, maintain, and/or operate this
washer according to the manufacturer’s
instructions may result in conditions which can
produce bodily injury and/or property damage.
flammable chemicals, thinner, etc., or anything
containing wax or chemicals such as in mops and
cleaning cloths, must not be put into the washer.
These flammable substances may cause the
fabric to catch on fire by itself.
NOTE: Underloading can cause out-of-balance
conditions that can shorten life of machine.
NOTE: The WARNING and IMPORTANT
SAFETY INSTRUCTIONS appearing in this
manual are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
installing, maintaining or operating the washer.
17. Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
18. Keep washer in good condition. Bumping or
dropping the washer can damage safety features.
If this occurs, have washer checked by a qualified
service person.
Any problems or conditions not understood should be
reported to the dealer, distributor, service agent or the
manufacturer.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Installation/Operation Supplement
Specifications and Dimensions
2 Speed Models
Specification
Overall Dimensions
Overall width, in. (mm)
18, 20
25
27, 30
35
40
50
26
(660)
26
(660)
29
(737)
30-1/8
(765)
30-5/8
(778)
34-1/16
(865)
Overall height, in. (mm)
Overall depth, in. (mm)
42-7/8
(1089)
45
(1143)
45-7/8
(1165)
47-1/4
(1200)
47-7/8
(1216)
50-13/16
(1291)
29-13/16
(757)
33-7/8
(860)
34-13/16
(884)
38-1/2
(978)
40-3/16
(1021)
41-13/16
(1087)
Weight and Shipping Information
Net weight, lbs. (kg)
390
435
498
650
706
820
(177)
(198)
(226)
(295)
(321)
(373)
Domestic shipping weight, lbs.
(kg)
428
(194)
470
(214)
545
(245)
680
(309)
744
(338)
875
(398)
Domestic shipping volume, ft3
(m3)
28
(0.8)
33
(0.9)
35
(1.0)
39
(1.09)
42.6
(1.19)
53
(1.5)
Export shipping weight lbs., (kg)
480
(218)
530
(241)
588
(267)
760
(345)
846
(385)
1020
(464)
Export shipping volume, ft3 (m3)
30.1
36.7
39.6
47.1
54.1
58.7
(0.86)
(1.03)
(1.11)
(1.32)
(1.51)
(1.67)
Wash Cylinder Information
Cylinder diameter,
in. (mm)
21
(533)
21
(533)
24
(610)
26-1/4
(667)
26-1/4
(667)
30
(762)
Cylinder depth, in. (mm)
Cylinder volume, ft3 (l)
Perforation size, in. (mm)
Perforation open area, %
13-3/4
(349)
18-3/4
(476)
16
(406)
18-3/8
(467)
20-1/4
(514)
20
(508)
2.76
(78.1)
3.76
(106.5)
4.19
(118.6)
5.76
(163.1)
6.34
(180)
8.18
(231.6)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
17
17
23
17
17.5
18
Table 1 (Continued)
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
T
Table 1 (Continued)
2 Speed Models (Continued)
Specification
18, 20
25
27, 30
35
40
50
Door Opening Information
Door opening diameter,
in. (mm)
12
(305)
12
(305)
14-11/32
(364)
14-11/32
(364)
16-1/4
(413)
16-1/4
(413)
Height of door bottom above floor,
in. (mm)
14-3/8
(365)
14-3/8
(365)
14
(356)
16
(406)
14-1/2
(368)
13-1/2
(343)
Power Consumption
Average power used per cycle,
kW-hr
0.20
425
0.25
400
0.25
400
0.30
510
0.34
510
0.42
700
Average HVAC load, Btu/hr
Drive Train Information
Number of motors in drive train
Wash/reverse power, HP (kW)
1
1
1
1
1
1
0.18
0.25
0.25
0.40
0.40
0.55
(0.13)
(0.19)
(0.19)
(0.30)
(0.30)
(0.41)
High extract power, HP (kW)
1.0
1.4
1.4
1.8
1.8
2.7
(0.746)
(1.04)
(1.04)
(1.3)
(1.3)
(2.01)
Cylinder Speeds
Wash/reverse speed, RPM
High extract speed, RPM
Centrifugal Force Data
Wash/reverse centrifugal force, Gs
High extract centrifugal force, Gs
53
55
47
47
47
44
525
540
480
470
470
450
0.85
82.1
0.90
86.8
0.75
78.4
0.82
82.3
0.82
82.3
0.825
86.3
Table 1 (Continued)
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Table 1 (Continued)
2 Speed Models (Continued)
Specification
Balance Detection
18, 20
25
27, 30
35
40
50
60
Vibration switch installed
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Direct Steam Heating (Optional)
Steam inlet connection size,
in. (mm)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
Number of steam inlets
1
1
1
1
1
1
1
Steam required to raise LOW
1.05 (0.75) 1.4 (1.01) 1.44 (1.03) 2.06 (1.48) 2.09 (1.51) 2.76 (1.99) 2.76 (1.99)
1.4 (1.01) 1.59 (1.15) 1.91 (1.37) 2.69 (1.94) 2.84 (2.04) 3.59 (2.59) 3.59 (2.59)
bath water temperature
HIGH
10°F (6°C)
Average steam use per cycle,
bhp (kg)
0.71
(11.1)
0.87
(13.6)
0.97
(15.2)
1.4
(21.6)
1.43
(22.4)
1.84
(28.9)
1.84
(28.9)
Electrical Heating (Optional)
Total electrical heating capacity,
kW
7.8
7.8
7.8
15.6
15.6
23.4
23.4
Electrical heating elements
3
3
3
6
3
9
9
Electrical heat element size, kW
2.6
2.6
2.6
2.6
5.2
2.6
2.6
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Gap Setting for Vibration Switch
(Variable-Speed and Fixed-Speed
Models)
18, 20
27, 30
35
40
50
60
80
125
Switch gap
setting*
0.015-
0.025 in.
(0.38-
0.025-
0.035 in.
(0.64-
0.030-
0.040 in.
(0.76-
0.020-
0.030 in.
(0.51-
0.025-
0.035 in.
(0.64-
0.013-
0.015 in.
(0.20-
0.009-
0.011 in.
(0.23-
0.006-
0.008 in.
(0.15-
0.64 mm)
0.89 mm)
1.02 mm)
0.64 mm)
0.89 mm)
0.25 mm)
0.28 mm)
0.20 mm)
* Gap setting should be made with “GO-NO-GO” type feeler gauge. Lower value must not trip switch. Upper value must trip switch.
Table 2
After the machine has been properly installed, the
vibration switch gap must be measured before
conducting the Control Function Test. Locate the gap
found between the vibration switch and the machine
the gap setting of the switch, proceed as follows:
1. Remove the front panel on 18-50 models.
Remove the rear panel on 60-80 models. Remove
the top cover on the 125 model. The switch can
be seen inside the bottom right corner of the A-
2. Measure the gap distance when the switch is in
both the open and closed positions. The
specifications should be at the minimum switch
gap setting when the switch is open and at the
maximum switch gap setting when the switch is
closed. If these distances are not correct, adjust
the balance switch to these specifications.
NOTE: The standard position of the switch is open,
or non-tripped.
3. Tighten nuts on switch extension after adjusting
the gap. Measure the gap distance to verify
accurate setting.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Variable-Speed and Fixed-Speed Models
Specification
Overall Dimensions
20
30
35
40
50
60
80
125
Overall width, in. (mm)
Overall height, in. (mm)
Overall depth, in. (mm)
26
(660)
29
(737)
30-1/8
(765)
30-5/8
(778)
34-1/16 34-1/16
(865) (865)
41-1/2
(1054)
48
(1219)
42-7/8
(1089)
45-7/8
(1165)
47-1/4
(1200)
47-7/8
(1216)
50-13/16 50-13/16
(1291) (1291)
56
(1422)
70-1/2
(1791)
29-13/16 34-13/16
(757)
38-1/2
(978)
40-3/16 42-13/16 42-13/16
(1021)
51-5/8
(1311)
56-3/4
(1441)
(884)
(1087)
(1087)
Weight and Shipping Information
Net weight, lbs. (kg)
386
(175)
498
(226)
621
(282)
706
(321)
767
(348)
773
(350)
1406
(633)
2346
(1066)
Domestic shipping weight, lbs. (kg)
424
(191)
545
(245)
670
(301)
744
(338)
818
(371)
824
(373)
1456
(655)
2421
(1098)
3
3
Domestic shipping volume, ft (m )
28
35
39
42.6
53
53
97
153
(0.8)
(1.0)
(1.09)
(1.19)
(1.5)
(1.5)
(2.7)
(4.3)
Export shipping weight, lbs. (kg)
476
(215)
588
(267)
731
(332)
846
(385)
967
(439)
1020
(463)
1506
(678)
2701
(1225)
3
3
Export shipping volume, ft (m )
30.1
(0.86)
39.6
(1.11)
47.1
(1.32)
54.1
(1.51)
58.7
(1.67)
58.7
(1.67)
109.5
(3.1)
173
(4.8)
Wash Cylinder Information
Cylinder diameter, in. (mm)
21
(533)
24
(610)
26-1/4
(667)
26-1/4
(667)
30
(762)
30
(762)
36
(914)
42
(1060)
Cylinder depth, in. (mm)
13-3/4
(349)
16
(406)
18-3/8
(467)
20-1/4
(514)
20
(508)
22
(559)
22
(559)
24
(609)
3
Cylinder volume, ft (l)
2.76
(78.1)
4.19
(118)
5.76
(163.1)
6.34
(180)
8.18
(232)
9.00
(255)
12.96
(367)
19.24
(545)
Perforation size, in. (mm)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
0.188
(4.76)
Perforation open area, %
17
23
17
17.5
18
18
27
17
Door Opening Information
Door opening size, in. (mm)
12
(305)
14-11/32 14-11/32 16-1/4
16-1/4
(413)
16-1/4
(413)
18-1/2
(470)
20
(508)
(364)
(364)
(413)
Height of door bottom above floor, in. (mm)
14-3/8
(365)
14
(356)
16
(406)
14-1/2
(368)
13-1/2
(343)
13-1/2
(343)
17-3/4
(451)
29
(737)
Power Consumption
Average power used per cycle, kW-hr
Average HVAC load, Btu/hr
0.05
400
0.07
450
0.20
510
0.34
510
0.37
750
0.21
750
0.40
950
0.60
1200
Table 3 (Continued)
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Table 3 (Continued)
Drive Train Information
Number of motors in drive train
Drive motor power, HP (kW)
1
1
1
1
1
1
1
1
2
2
2
2
2
3
5
7.5
(1.5)
(1.5)
(1.5)
(1.5)
(1.5)
(2.2)
(3.7)
(5.6)
Cylinder Speeds
Gentle wash/reverse speed, RPM
Wash/reverse speed, RPM
Distribution speed, RPM
Low extract speed, RPM
29
52
27
48
26
46
26
47
24
43
24
43
22
40
27
37
82
86
73
73
68
77
63
62
366
534
343
500
328
478
328
478
307
447
307
447
280
408
260
380
Medium extract speed, RPM
(Not available on Electronic Control models.)
High extract speed, RPM
685
641
613
614
573
574
524
485
Centrifugal Force Data
Gentle wash centrifugal force, Gs
Wash/reverse centrifugal force, Gs
Distribution centrifugal force, Gs
Low extract centrifugal force, Gs
Medium extract centrifugal force, Gs
High extract centrifugal force, Gs
Balance Detection
0.25
0.8
2
0.25
0.8
2
0.25
0.8
2
0.25
0.8
2
0.25
0.8
2
0.25
0.8
2
0.25
0.8
2
0.43
0.8
2
40
40
40
40
40
40
40
40
85
85
85
85
85
85
85
85
140
140
140
140
140
140
140
140
Vibration switch installed*
Standard Standard Standard Standard Standard Standard Standard Standard
Direct Steam Heating (Optional)
Steam inlet connection size,
in. (mm)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
1/2
(13)
3/4
(19)
Number of steam inlets
1
1
1
1
1
1
1
1
Steam required to raise bath water LOW
0.62
0.92
2.1
2.09
2.8
3.6
4.1
6.8
temperature 10°F (6°C), lbs. (kg)
(0.28)
(0.42)
(1.51)
(1.51)
(2.0)
(1.63)
(2.93)
(4.9)
HIGH
0.88
(0.4)
1.31
(0.6)
2.69
(1.96)
2.84
(2.04)
3.6
(2.59)
5.5
(2.49)
6.0
(4.34)
8.9
(6.4)
Average steam use per cycle, bhp (kg)
0.54
(8.3)
0.73
(11.3)
1.4
(21.6)
1.43
(22.4)
1.8
(28.9)
2.32
(36.4)
2.93
(45.9)
4.5
(71)
Electrical Heating (Optional)
Total electrical heating capacity, kW
7.8
7.8
15.6
23.4
23.4
31.2
N/A
15.6
3
Electrical heating elements
3
3
6
9
9
12
N/A
N/A
Electrical heat element size, kW
2.6
2.6
2.6
5.2
2.6
2.6
2.6
* Refer to Gap Setting for Vibration Switch (Variable-Speed and Fixed-Speed Models) section for specifications.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
For 18, 20, 25, 27, 30 and 35 Pound
Capacity Machines
3
1
2
4
CHM1995N
1
2
Sump
Gap Distance
3
4
Vibration Switch
Switch Extension
Figure 1
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
For 40 and 50 Pound Capacity Variable-Speed
and Fixed-Speed Machines
3
3
2
1
4
4
CHM2000N
1
2
Sump
Gap Distance
3
4
Vibration Switch
Switch Extension
Figure 2
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
For 60 Pound Capacity Variable-Speed and
Fixed-Speed Machines
3
2
1
6
4
5
CHM1999N
1
2
3
Lower Bracket
Upper Bracket
Vibration Switch
4
5
6
Balance Bolt
Lock Nut
Gap Distance
Figure 3
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Dimensional Clearances
F
E
D
FRONT
A
B
C
U158M
Figure 6
Machine Capacity Dimensional Clearances
Dimensions
A
18, 20
25
27, 30
35
40
50
60
80
125
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
2 in.
(50 mm)
24 in.
(600 mm)
26 in.
26 in.
29 in.
30-1/8 in.
30-5/8 in. 34-1/16 in. 34-1/16 in. 41-1/2 in.
48 in.
B
C
D
E
F
(660 mm) (660 mm) (737 mm) (765 mm) (778 mm) (865 mm)
(865 mm) (1054 mm) (1219 mm)
1 in.
(25 mm)
1 in.
(25 mm)
1 in.
(25 mm)
1 in.
(25 mm)
1 in.
1 in.
1 in.
1 in.*
12 in.
(300 mm)
(25 mm)
(25 mm)
(25 mm)
(25 mm)
16-3/8 in.
16-3/8 in.
19-1/4 in.
19-1/4 in.
22 in.
22 in.
22 in.
25 in.
26-1/4 in.
(416 mm) (416 mm) (490 mm) (490 mm) (560 mm) (560 mm)
25-5/8 in. 29-7/16 in. 30-1/2 in. 34 in. 36 in. 37-1/2 in.
(650 mm) (705 mm) (775 mm) (864 mm) (914 mm) (953 mm)
12 in. 12 in. 12 in. 18 in. 12 in. 12 in.
(305 mm) (305 mm) (305 mm) (457 mm) (305 mm) (305 mm)
(560 mm)
(635 mm) (667 mm)
38-3/4 in.
51-5/8 in. 56-3/4 in.
(984 mm) (1311 mm) (1441 mm)
12 in.
24 in.
24 in.
(305 mm)
(610 mm) (610 mm)
*For 80 pound models intended for standard mounting, clearance should be 6 in. (150 mm).
Table 4
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Dimensions
18, 20, 25, 27, 30, 35, 40, 50, 60 and
80 Models
4
5
3
2
1
I
6
J
7
8
S
R
G
Q
K
H
P
L
A
M
B
C
O
N
E
F
D
9
CHM2019N
1
2
3
Supply Dispenser
Input Power Block
External Chemical Supply Signal Terminal Strip
(OPL only)
5
6
7
8
9
Hot Water Inlet
Extra Inlet Valve
External Chemical Supply Inlet (OPL only)
Vacuum Breaker
4
Cold Water Inlet
Drain Outlet
Figure 7
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Machine Capacity Dimensions
Dimensions
A
18, 20
25
27, 30
35
40
50
60
80
22-15/16 in.
23 in.
24 in.
26 in.
25-3/4 in. 26-3/8 in.
26-3/8 in.
(670 mm)
30-5/8 in.
(777 mm)
(583 mm) (584 mm) (610 mm)
17-1/4 in. 17-1/4 in. 17 in.
(438 mm) (438 mm) (432 mm)
14-3/8 in. 14-3/8 in. 14 in.
(365 mm) (365 mm) (356 mm)
26 in. 26 in. 29 in.
(660 mm) (660 mm) (737 mm)
25-5/8 in. 30 in. 30-5/8 in.
(650 mm) (762 mm) (775 mm)
(660 mm) (654 mm) (670 mm)
19 in. 18 in. 18-1/4 in.
(483 mm) (457 mm) (464 mm)
16 in. 14-1/2 in. 13-1/2 in.
(406 mm) (368 mm) (343 mm)
30-1/8 in.
(765 mm) (778 mm) (865 mm)
34 in. 36 in. 37-3/4 in.
(864 mm) (914 mm) (959 mm)
18-1/4 in.
(464 mm)
21-5/8 in.
(549 mm)
B
C
D
E
F
15 in.
(381 mm)
17-3/4 in.
(451 mm)
30-5/8 in. 34-1/16 in. 34-1/16 in.
41-1/2 in.
(1054 mm)
(865 mm)
48 in.
(1219 mm)
38-3/4 in.
(984 mm)
29-13/16 in. 34-3/16 in. 34-13/16 in. 38-1/8 in. 40-3/16 in. 41-13/16 in. 42-13/16 in.
(757 mm) (868 mm) (884 mm)
51 in.
(968 mm) (1021 mm) (1062 mm) (1087 mm) (1295 mm)
0
0
0
1-1/8 in.
(29 mm)
1/2 in.
(13 mm)
1/2 in.
(13 mm)
1/2 in.
(13 mm)
1/2 in.
(13 mm)
G
H
I
42 in.
45 in.
45 in.
47 in.
47 in.
49-15/16 in. 49-15/16 in.
56 in.
(1062 mm) (1143 mm) (1143 mm) (1194 mm) (1194 mm) (1268 mm) (1268 mm) (1422 mm)
12-1/2 in. 12-1/2 in. 15-1/4 in.
(318 mm) (318 mm) (387 mm)
14-1/4 in. 15-7/16 in. 20-3/4 in.
(362 mm) (392 mm) (527 mm)
20-3/4 in.
(527 mm)
22-1/4 in.
(572 mm)
11-1/2 in. 11-1/2 in. 14-3/4 in. 10-13/16 in. 14-7/16 in. 19-3/4 in.
(292 mm) (292 mm) (375 mm) (275 mm) (367 mm) (502 mm)
19-3/4 in.
(502 mm)
14-7/16 in.
(378 mm)
J
3-1/2 in.
(89 mm)
3-1/2 in.
(89 mm)
3-3/4 in.
(95 mm)
2-3/4 in.
(70 mm)
3-13/16 in. 3-1/2 in.
3-1/2 in.
(89 mm)
3-7/16 in.
(87 mm)
K
L
(97 mm)
(89 mm)
34-1/2 in. 37-1/2 in. 37-11/16 in. 40-1/8 in.
(876 mm) (952 mm) (957 mm) (1020 mm) (990 mm) (1054 mm) (1054 mm) (1130 mm)
39 in.
41-1/2 in.
41-1/2 in.
44-1/2 in.
5-3/4 in.
(146 mm) (146 mm) (149 mm)
4-1/2 in. 4-1/2 in. 4 in.
(114 mm) (114 mm) (102 mm)
5-3/4 in.
5-7/8 in.
7-5/16 in.
(186 mm) (140 mm) (163 mm)
4-3/4 in. 4-3/4 in. 5 in.
(121 mm) (121 mm) (127 mm)
5-1/2 in.
6-7/16 in.
6-7/16 in.
(163 mm)
6-3/8 in.
(162 mm)
M
N
O
P
Q
R
S
5 in.
(127 mm)
5-3/4 in.
(146 mm)
2 in.
2 in.
2 in.
2 in.
3 in.
3 in.
3 in.
(76 mm)
3 in.
(76 mm)
(51 mm)
(51 mm)
(51 mm)
(51 mm)
(76 mm)
(76 mm)
36-3/16 in. 39-3/16 in. 38-15/16 in. 41-15/16 in. 42-1/8 in. 43-3/16 in.
43-3/8 in.
42-3/4 in.
(919 mm) (995 mm) (989 mm) (1064 mm) (1070 mm) (1097 mm) (1102 mm) (1086 mm)
38-1/2 in. 41-1/2 in. 41 in. 41-15/16 in. 43-3/16 in. 45-1/2 in. 45-1/2 in. 50 in.
(978 m) (1054 mm) (1041 mm) (1064 mm) (1097 mm) (1156 mm) (1156 mm) (1270 mm)
1-3/16 in. 1-3/16 in. 1-3/16 in.
1-3/16 in.
(30 mm)
1-3/16 in. 1-3/16 in.
1-3/16 in.
(30 mm)
1-3/16 in.
(30 mm)
(30 mm)
(30 mm)
(30 mm)
(30 mm)
(30 mm)
3 in.
3 in.
3 in.
3 in.
3 in.
3 in.
3 in.
(76 mm)
3 in.
(76 mm)
(76 mm)
(76 mm)
(76 mm)
(76 mm)
(76 mm)
(76 mm)
Table 5
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
125 Model
2
3
J
4
K
M
O
L
1
5
N
6
R
I
S
T
A
B
C
P
H
E
D
F
Q
G
7
B023I
1
2
3
4
Dry Chemical Dispenser (Optional)
Cold Water Inlet
Extra Water Inlet (Optional)
Hot Water Inlet
5
6
7
Liquid Chemical Inlet
Steam Inlet (Optional)
Drain Outlet
Figure 8
Machine Capacity Dimensions
1016 mm (40 in.)
1041 mm (41 in.)
978 mm (38.5 in.)
851 mm (33.5 in.)
756 mm (29.75 in.)
610 mm (24 in.)
A
B
C
D
E
F
G
H
I
K
L
768 mm (30.12 in.)
737 mm (29 in.)
M
N
O
P
Q
R
S
T
203 mm (8 in.)
1219 mm (48 in.)
1283 mm (50.5 in.)
1422 mm (56.75 in.)
25 mm (1 in.)
330 mm (13 in.)
124 mm (4.88 in.)
1622 mm (63.88 in.)
1648 mm (64.88 in.)
1692 mm (66.63 in.)
1791 mm (70.5 in.)
1130 mm (44.5 in.)
J
Table 6
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Electrical Specifications
Electrical Specifications
18 and 20 Pound Capacity Models
Voltage Designation
Standard
Electric Heat
2 Speed Models
B
C
D
E
F
110 – 120
380 – 415
220 – 240
220 – 240
440 – 480
380
60
50
50
50
60
60
50
60
60
1
3
3
1
3
3
3
3
1
2
4
3
2
3
3
3
3
2
15
4
20
15
15
20
15
15
15
15
20
12
14
14
12
14
14
14
14
12
4
N/A
2.5
2.5
4
14
24
42
16
13
24
24
42
15
25
45
20
15
25
25
45
14
10
6
2.5
6
5
10
4
16
4
2.5
2.5
2.5
2.5
4
12
14
10
10
6
H
J
4
2.5
6
200
5
O
Y
208 – 240
208 – 240
5
6
10
16
Variable-Speed Models
3.8 15 14
Q
200 – 240
50/60
3
3.8
2.5
N/A
N/A
N/A
N/A
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 7
Electrical Specifications
25, 27 and 30 Pound Capacity Models
Voltage Designation
Standard
Electric Heat
2 Speed Models
C
D
E
F
380 – 415
220 – 240
220 – 240
440 – 480
380
50
50
50
60
60
50
60
60
3
3
1
3
3
3
3
1
4
3
2
3
3
3
3
2
4
6
15
15
20
15
15
15
15
20
14
14
12
14
14
14
14
12
2.5
2.5
4
15
24
42
16
14
20
25
43
20
25
45
20
15
12
10
6
4
6
10
4
16
4
2.5
2.5
2.5
2.5
4
12
14
H
J
4
2.5
200
6
25
30
45
10
10
6
6
6
O
Y
208 – 240
208 – 240
7
16
10
Variable-Speed Models
4.8 15 14
Q
200 – 240
50/60
3
3
2.5
N/A
N/A
N/A
N/A
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 8
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Electric Heat
Electrical Specifications
35 Pound Capacity Models
Voltage Designation
Standard
2 Speed Models
C
D
F
380 – 415
220 – 240
440 – 480
200 – 240
208 – 240
50
50
60
60
60
3
3
3
3
1
4
3
3
3
2
5
7
15
20
15
20
25
14
12
14
12
10
2.5
4
26
43
26
43
30
50
30
50
10
6
6
16
6
5
2.5
4
10
6
O
Y
7
16
12
6
N/A
Variable-Speed Models
N
P
440 – 480
380 – 415
208 – 240
200 – 240
200 – 240
50/60
50/60
50/60
50/60
3
3
3
1
3
3
3
2
2.3
2.3
5.9
5.9
15
15
15
15
15
14
14
14
14
14
2.5
2.5
2.5
2.5
27.3
24
30
25
45
10
10
6
6
6
Q
T
X
43.4
16
N/A
N/A
50/60 1 or 3 2 or 3 5.9/5.9
2x2.5
3x2.5
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 9
Electrical Specifications
40 Pound Capacity Models
Voltage Designation
Standard
Electric Heat
2 Speed Models
C
D
F
380 – 415
220 – 240
440 – 480
380
50
50
60
60
50
60
60
3
3
3
3
3
3
1
4
3
3
3
3
3
2
5
7
15
20
15
15
20
20
30
14
12
14
14
2.5
4
26
45
29
25
30
50
30
30
40
50
10
6
6
16
6
5
2.5
2.5
4
10
10
6
H
J
3
6
200
7
12
12
10
38
45
16
16
O
Y
208 – 240
208 – 240
7
4
6
13.5
6
N/A
N/A
Variable-Speed Models
N
P
440 – 480
380 – 415
200 – 240
200 – 240
50/60
50/60
50/60
3
3
3
3
3
3
6
6
5
15
15
15
15
14
14
14
14
2.5
2.5
2.5
2.5
30
29
48
30
30
60
10
10
6
6
6
Q
X
16
50/60 1 or 3 2 or 3 11/11
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 10
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Voltage Designation
Electrical Specifications
50 Pound Capacity Models
Standard
Electric Heat
2 Speed Models
C
D
E
380 – 415
220 – 240
220 – 240
440 – 480
200
50
50
50
60
50
60
60
3
3
1
3
3
3
1
4
3
2
3
3
3
2
6
15
20
30
15
20
20
30
14
12
10
14
12
12
10
2.5
4
39
64
37
39
50
70
40
50
6
4
8
6
16
25
10
16
12
15
6
6
F
2.5
3 x 4
4
J
10
10
15
N/A
O
Y*
208 – 240
208 – 240
64
37
70
40
4
8
25
10
6
Variable-Speed Models
N
P
440 – 480
380 – 415
200 – 240
200 – 240
200 – 240
50/60
50/60
50/60
50/60
3
3
3
1
3
3
3
2
4
15
15
15
15
15
14
14
14
14
14
2.5
2.5
2.5
2.5
41.6
36.5
62.6
45
40
70
8
8
4
10
10
25
4
Q
T
X
6.3
6.3
N/A
N/A
50/60 1 or 3 2 or 3 6.3/6.3
2x2.5
3x2.5
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
*Coin models only.
Table 11
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Electric Heat
Electrical Specifications
60 Pound Capacity Models
Voltage Designation
Standard
2 Speed Models
C
D
F
380-415
220-240
440-480
380
50
50
3
3
4
3
4
7
4
3
8
7
9
15
20
15
20
20
20
20
14
12
14
12
12
12
12
2.5
4.0
2.5
4.0
4.0
4.0
4.0
37
64
50
70
8
4
10.0
25.0
10.0
10.0
16.0
25.0
N/A
60
3
3
41
50
8
H
J
60
3
3
33
50
8
200
50
3
3
55
60
6
O
X
208-240
200-240
60
3
3
64
70
4
50/60
1/3
2/3
N/A
N/A
N/A
Variable-Speed Models
N
P
440-480
380-415
200-240
200-240
50/60
50/60
50/60
50/60
3
3
3
3
4
5
15
15
15
20
14
14
14
12
2.5
2.5
2.5
4.0
42
37
50
40
8
8
10.0
10.0
16.0
N/A
Q
X
3
3
6
65
60
6
1/3
2/3
10
N/A
N/A
N/A
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 12
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Voltage Designation
Electrical Specifications
80 Pound Capacity Models
Standard
Electric Heat
Variable-Speed Models
N
P
440 – 480
380 – 415
200 – 240
50/60
50/60
50/60
3
3
3
3
3
3
4.5
4.5
15
15
20
14
14
12
2.5
2.5
4
42
37
45
40
90
8
8
2
10
10
35
Q
12.4
87.4
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 13
Electrical Specifications
125 Pound Capacity Models
Voltage Designation
Standard
Electric Heat
Variable-Speed Models
N
P
440 – 480
380 – 415
200 – 240
50/60
50/60
50/60
3
3
3
3
3
3
5.1
5.1
7.9
15
15
25
14
14
10
2.5
2.5
6
N/A
N/A
N/A
Q
NOTE: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.
Table 14
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
Operation
Table 15 (Continued)
Symbol
Description
Symbol
Description
Start
Edit Down
CHM504N
CHM493N
Special Wash
(Owner programming
required – See Cycle Charts
in programming manual)
Start
Select Mode
Wash
CHM494N
CHM505N
Normal Cycle
Delicate Cycle
Permanent Press Cycle
Cold Wash
Warm Wash
Hot Wash
CHM506N
CHM495N
CHM507N
CHM496N
Add Bleach
Rinse
CHM508N
CHM497N
CHM508N
CHM509N
CHM498N
Spin
CHM510N
CHM499N
Door Open
Clean Filter
CHM511N
CH
CHM500N
Stop
CHM512N
CHM501N
Reduced Spin
(∨) keypad
Start
CHM2003N
CHM502N
Extra Wash
(∧) keypad
Edit Up
CHM2004N
CHM503N
CHM503N
Table 15 (Continued)
Table 15 (Continued)
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Installation/Operation Supplement
Table 15 (Continued)
Symbol
Description
Normal Wash
Hot
95C
95C
60C
60C
40C
40C
CHM1980N
Permanent Press
Hot
CHM1981N
Normal Wash
Warm
CHM1982N
Permanent Press
Warm
CHM1983N
Normal Wash
Cold
CHM1984N
Permanent Press/Exit
Cold
CHM1985N
*
Hand Wash/Edit Up
CHM1986N
Gentle Wash/Edit Down
Cold
30C
CHM1987N
Time
CHM1988N
Start/Enter/
Wash Temperature Display
CHM1989N
Vend Price/Actuation
CHM1990N
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
4. Close door and turn handle counterclockwise
Instructions for EDC Control
1. Turn on the main power source (circuit breaker).
2. Push button and turn handle clockwise to open.
U005IE1B
Figure 11
U001IE1B
6. For machines equipped with a coin meter: Insert
Figure 9
3. Load to capacity whenever possible. DO NOT
INSERT
WASH
COIN/CARD
PERM
NORMAL
CLOSE
DOOR
PRESS
RINSE
SPIN
ADD
WARM
BLEAC
B148R
Figure 12
U003IE1A
Figure 10
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
7. For machines equipped with a cardreader:
Insert card into cardreader and follow the
REMOVE CARD UNTIL DISPLAY ON
CARDREADER READS “Remove Card”.
NOTE: If a higher-priced cycle is selected, after the
full price has been satisfied for current cycle,
display will show additional price required and the
INSERT COIN/CARD light will flash. Insert coins/
card to satisfy price for special cycle. If price is not
satisfied, the previous cycle selected will begin after
one minute.
9. If display flashes “SPEC” then “CYCL”, extra
options such as high-speed extract or extra rinse
are available. If desired, insert coins/card to meet
additional price shown on display. If not desired,
wait 30 seconds for earlier cycle selection to
continue.
INSERT
WASH
COIN/CARD
PERM
NORMAL
CLOSE
DOOR
PRESS
RINSE
SPIN
ADD
WARM
BLEAC
10. Add bleach to container 2 when ADD BLEACH
B149R
B149R
Figure 13
1
3
8. Add detergent to container 1 and softener to
container 3. Press the START key. Refer to
S
M
R
E
P
S
S
E
R
P
L
M
R
A
M
R
O
WA
N
T
D
R
R
E
A
S
/C
I
N
I
N
O
C
OT
H
E
S
O
O
L
R
C
D
H
E
S
O
A
W
D
H
C
D
A
B
A
E
L
S
IN
R
IN
P
S
2
WASH
INSERT
COIN/CARD
3
1
CLOSE
DOOR
RINSE
SPIN
ADD
BLEACH
L
IA
C
E
W
P
H
S
S
A
*
T
S
AR
ST
E
T
A
IC
L
E
D
B156R
M
D
R
L
E
P
S
O
C
S
E
SPECIAL
WASH
R
P
L
M
R
A
M
R
O
WA
N
T
D
R
R
E
A
S
/C
I
N
I
N
O
T
C
O
H
E
S
*
O
O
L
R
C
D
H
E
S
O
A
1
2
3
Detergent
Bleach
Softener
W
D
H
C
D
E
L
A
B
A
S
IN
R
IN
P
S
START
2
Figure 15
11. Cycle is complete when display reads “:00”.
B155R
1
2
3
Detergent
Bleach
Softener
Figure 14
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
3. Load to capacity whenever possible. DO NOT
Instructions for Mechanical Timer
1. Turn on the main power source (circuit breaker).
For non-coin models: Turn on the On/Off switch
on the front panel to the On position.
2. Push button and turn handle clockwise to open.
U003IE1A
Figure 18
4. Close door and turn handle counterclockwise
U001IE1B
Figure 16
For non-coin models: Press and hold the DOOR
UNLOCK button on the left side of the control
panel while performing the above step. Refer to
U005IE1B
On
Figure 19
DOOR UNLOCK
Off
U135R
Figure 17
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Installation/Operation Supplement
For non-coin models: Press the Start button.
CYCLE INDICATOR
WASH CYCLES
HOT
WARM WARM
COLD
ON
On
Off
Start
DELICATE
KNITS
HEAVILY PERM- NOELICATE
SOILED PRESS WNITS
ADD BLEACH
WHEN LIT
ARM
COLD
U136R
U136R
U002IE1A
Figure 22
Figure 20
6. At start of cycle, add liquid and/or powder
8. Add bleach to container 2 when ADD BLEACH
a. Add detergent to container 1.
b. Add softener to container 3.
For non-coin models: Liquid supplies may be
injected directly into the supply dispenser by an
external chemical supply dispenser. Refer to
Installation and Programming Manuals.
3
1
7. For coin models: Insert required number of coins
ON
2
3
ADD BLEACH
WHEN LIT
B159R
1
2
3
Detergent
Bleach
Softener
2
1
Figure 23
B157R
1
2
3
Detergent
Bleach
Softener
Figure 21
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
3. Load to capacity whenever possible. DO NOT
Instructions for S, P and V Series
Microcomputers
1. Turn on main power source (circuit breaker).
For non-coin models: Turn the On/Off switch on
the front panel to the On position.
2. Push button and turn handle clockwise to open.
U003IE1A
Figure 26
4. Close door and turn handle counterclockwise
U001IE1B
Figure 24
For non-coin models: Press and hold the DOOR
UNLOCK button on the left side of the control
panel while performing the above step. Refer to
I
U005IE1B
On
Figure 27
DOOR UNLOCK
Off
U135R
U135R
Figure 25
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Installation/Operation Supplement
5. Add liquid and/or powder supplies to supply
9. When applicable, add beach to container 2 when
a. Add detergent to container 1.
b. Add softener to container 3.
For non-coin models: Liquid supplies may be
injected directly into the supply dispenser by an
external chemical supply dispenser. Refer to
Installation and Programming Manuals.
3
2
CYCLE SELECTION
4
1
6. Press the Up and Down keys to select wash cycle.
7. For coin models: Insert required number of coins
B160R
1
2
3
4
Up
Down
Start
Stop
3
Figure 30
NOTE: To stop a cycle at any time, press the Stop
key. Non-coin models only.
2
1
NOTE: To display the temperature of the water
while a cycle is running, press the Up key. To
display the number of the cycle in progress, press
the Start key.
B157R
1
2
3
Detergent
Bleach
Softener
Figure 28
8. For non-coin models: Press the Start key. Refer
3
2
4
1
CYCLE SELECTION
B159R
1
2
3
4
Up
Down
Start
Stop
Figure 29
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Installation/Operation Supplement
4. Close door and turn handle counterclockwise
Instructions for B Series
Microcomputer
NOTE: Opening the coin box while in Run Mode
and before a cycle has started will put control into
Audit Mode. Display will show “Audt”. To revert
back to Run Mode, close coin box and press START
keypad.
1. Turn on main power source (circuit breaker).
2. Push button and turn handle clockwise to open.
U005I
Figure 33
5. The default wash cycle will display. Refer to
NOTE: Perm Press Cold is the default cycle for
coin models if none is selected. Perm Press Hot is
the default cycle for OPL models.
U001I
U001I
NORMAL
PERM PRESS
Figure 31
WASH
HOT
HOT
ADD
BLEACH
LIGHT SOIL
VISA TM
3. Load to capacity whenever possible. DO NOT
RINSE
SPIN
HOT
WARM
HEAVY SOIL
UNIFORMS
START
DOOR
HOT
HOT
CLEAN
FILTER
DELICATE
STAINED
HOT
COLD
CHM522N
95C
60C
40C
95C
60C
40C
30C
U003I
Figure 32
CHM1764C
Figure 34
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation/Operation Supplement
6. If desired, select a different cycle at this point or
after satisfying vend. The LED indicator for that
cycle will light.
9. If the machine is a card operated unit, insert and
remove card. Contact the card reader
manufacturer for details.
7. Add liquid and/or powder supplies to supply
10. If the unit is interfaced to a central/remote pay
system, go to the central/remote pay console,
make payment and select the machine. Contact
the pay system manufacturer for more details.
a. Add detergent to compartment 1.
b. Add softener to compartment 3.
11. When applicable, add bleach to compartment 2
when the ADD BLEACH LED is lit.
12. Press the desired wash cycle key.
13. Press the START keypad.
3
14. During first fill, the desired wash cycle can be
changed. After first fill has ended, the wash cycle
active at that moment remains the chosen wash
cycle.
2
1
15. When cycle is complete, display shows “donE”.
B157R
1
2
3
Detergent
Bleach
Softener
Figure 35
8. If the machine is a coin operated unit, add coins.
As each coin is added, the display counts down to
the amount remaining.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Installation/Operation Supplement
4. Close door and turn handle counterclockwise
Instructions for A Series
Microcomputer
NOTE: Opening the coin box while in Run Mode
and before a cycle has started will put control into
Audit Mode. Display will show “Audt”. To revert
back to Run Mode, close coin box and press START
keypad.
1. Turn on main power source (circuit breaker).
2. Push button and turn handle clockwise to open.
U005I
Figure 38
5. The default wash cycle will display. Refer to
NOTE: The default cycle is Perm Press 60°C for
coin models if no cycle is selected.
U001I
U001I
Figure 36
3. Load to capacity whenever possible. DO NOT
U003I
Figure 37
CHM1759C
Figure 39
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Installation/Operation Supplement
6. If desired, select a different cycle at this point or
after satisfying vend. The LED indicator for that
cycle will light.
10. If the unit is interfaced to a central/remote pay
system, go to the central/remote pay console,
make payment, select the machine, and follow
central/remote pay system instructions.
7. Add liquid and/or powder supplies to supply
11. Press the desired wash cycle key if it hasn’t
already been selected.
a. Add detergent to compartment 1.
NOTE: Once START keypad is pressed, the
selected wash cycle is locked in and wash cycle will
begin.
b. Add softener to compartment 3.
.
3
12. Press the START keypad.
13. Add bleach if and when prompted (display will
show “bLCH”, signal will sound on and off for
45 seconds and Add Bleach indicator lights).
NOTE: If the version of the control in machine is
capable of reading temperature and control is not
in Audit Mode, pressing the START keypad while a
cycle is running will cause display to show
2
1
temperature. Press START keypad again to revert
to minutes remaining shown in display.
B157R
1
2
3
Detergent
Bleach
Softener
14. When cycle is complete, display shows “dOnE”,
the Door Open LED lights and door can be
opened.
Figure 40
8. If the machine is a coin operated unit, add coins.
As each coin is added, the display counts down to
the amount remaining.
9. If the machine is a card operated unit, insert and
remove card per card system instructions.
F232145 (EN)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
36
|