Alienware 17
Owner’s Manual
Computer model: Alienware 17 R1
Regulatory model: P18E
Regulatory type: P18E001
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
Before Working Inside Your Computer.
.
.
.
.
.
.
.
.
.
.
.
11
Before You Begin .
Safety Instructions .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
2
3
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Procedure .
.
.
.
.
.
.
.
.
.
14
4
5
Replacing the Base Cover
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
15
Procedure .
.
.
.
.
.
.
.
.
.
.
15
Removing the Battery.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
16
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
16
16
.
.
6
Replacing the Battery.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
17
7
Removing the Memory Module(s) 3 and 4 .
.
.
.
.
.
.
.
18
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18
19
.
.
8
Replacing the Memory Module(s) 3 and 4
.
.
.
.
.
.
.
.
20
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
20
9
Removing the Primary Hard Drive.
.
.
.
.
.
.
.
.
.
.
.
.
.
21
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
21
21
.
.
10
Replacing the Primary Hard Drive.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
23
Postrequisites .
Contents
|
3
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Removing the Secondary Hard Drive.
.
.
.
.
.
.
.
.
.
.
.
24
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
24
24
.
.
12
13
14
15
16
17
18
19
Replacing the Secondary Hard Drive .
.
.
.
.
.
.
.
.
.
.
.
26
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
26
26
Removing the Third Hard Drive (Optional) .
.
.
.
.
.
.
.
27
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
27
28
.
.
Replacing the Third Hard Drive (Optional) .
.
.
.
.
.
.
.
30
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
30
30
Removing the Wireless Mini-Card.
.
.
.
.
.
.
.
.
.
.
.
.
.
31
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
31
31
.
.
Replacing the Wireless Mini-Card .
.
.
.
.
.
.
.
.
.
.
.
.
.
33
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
33
33
Removing the Processor Fan .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
34
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
34
34
.
.
Replacing the Processor Fan .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
35
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
35
35
Postrequisites .
Removing the Video-card Fan
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
36
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
36
36
.
.
20 Replacing the Video-card Fan
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
38
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
38
38
Contents
|
4
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Removing the Processor Heat Sink .
.
.
.
.
.
.
.
.
.
.
.
.
39
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
39
39
.
.
22 Replacing the Processor Heat Sink .
.
.
.
.
.
.
.
.
.
.
.
.
40
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
40
40
23 Removing the Video-Card Heat Sink .
.
.
.
.
.
.
.
.
.
.
.
41
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41
41
.
.
24 Replacing the Video-Card Heat Sink .
.
.
.
.
.
.
.
.
.
.
.
42
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42
42
25 Removing the Video Card
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
43
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
43
43
.
.
26 Replacing the Video Card
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
44
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
44
44
27
Removing the Palm Rest .
Prerequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
45
.
.
.
.
.
.
45
28 Replacing the Palm Rest .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
49
49
29 Removing the Memory Module(s) 1 and 2
.
.
.
.
.
.
.
.
50
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
50
51
.
.
30 Replacing the Memory Module(s) 1 and 2.
.
.
.
.
.
.
.
.
52
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
52
52
Postrequisites .
Contents
|
5
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Removing the Keyboard .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
53
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
53
54
.
.
32 Replacing the Keyboard .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
56
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
56
56
33 Removing the Power-Button Board.
.
.
.
.
.
.
.
.
.
.
.
.
57
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
57
58
.
.
34 Replacing the Power-Button Board.
.
.
.
.
.
.
.
.
.
.
.
.
59
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
59
59
35 Removing the Status-Light Board
.
.
.
.
.
.
.
.
.
.
.
.
.
60
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
60
61
.
.
36 Replacing the Status-Light Board.
.
.
.
.
.
.
.
.
.
.
.
.
.
62
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
62
62
37 Removing the Keyboard Daughter Board.
.
.
.
.
.
.
.
.
63
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
63
64
.
.
38 Replacing the Keyboard Daughter Board .
.
.
.
.
.
.
.
.
65
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
65
65
Postrequisites .
39 Removing the Speakers
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
66
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
66
67
.
.
40 Replacing the Speakers
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
68
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
68
68
Contents
|
6
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Removing the I/O Board
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
69
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
69
70
.
.
42 Replacing the I/O Board
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
71
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
71
71
43 Removing the Media-Card Reader.
.
.
.
.
.
.
.
.
.
.
.
.
.
72
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
72
73
.
.
44 Replacing the Media-Card Reader.
.
.
.
.
.
.
.
.
.
.
.
.
.
74
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
74
74
45 Removing the Display Mini-Card.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
75
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
75
76
.
.
46 Replacing the Display Mini-Card.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
77
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
77
77
47 Removing the Power-Adapter Port .
.
.
.
.
.
.
.
.
.
.
.
.
78
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
78
79
.
.
48 Replacing the Power-Adapter Port .
.
.
.
.
.
.
.
.
.
.
.
.
80
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
80
80
Postrequisites .
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
81
82
.
.
50 Replacing the System Board .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
84
Procedure .
Postrequisites .
Entering the Service Tag in the BIOS
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
84
84
86
Contents
|
7
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Removing the Coin-Cell Battery .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
87
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
87
88
.
.
52 Replacing the Coin-Cell Battery .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
89
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
89
89
53 Removing the Processor .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
90
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
90
91
.
.
54 Replacing the Processor .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
92
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
92
93
55 Removing the Display Assembly
.
.
.
.
.
.
.
.
.
.
.
.
.
.
95
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
95
96
.
.
56 Replacing the Display Assembly.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
98
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
98
98
57 Removing the Display Bezel
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
99
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
99
100
.
.
58 Replacing the Display Bezel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
101
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
101
101
Postrequisites .
59 Removing the Display Hinges
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
102
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
102
103
.
.
60 Replacing the Display Hinges.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
104
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
104
104
Contents
|
8
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Removing the Display Panel
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
105
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
105
106
.
.
62 Replacing the Display Panel
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
107
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
107
107
63 Removing the Logo Board .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
108
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
108
109
.
.
64 Replacing the Logo Board .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
110
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
110
110
65 Removing the Display Mini-Card Cable
.
.
.
.
.
.
.
.
.
.
111
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
111
112
.
.
66 Replacing the Display Mini-Card Cable
.
.
.
.
.
.
.
.
.
.
113
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
113
113
67 Removing the Display-Light Boards
.
.
.
.
.
.
.
.
.
.
.
.
114
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
114
115
.
.
68 Replacing the Display-Light Boards
.
.
.
.
.
.
.
.
.
.
.
.
116
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
116
116
Postrequisites .
69 Removing the Camera
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
117
Prerequisites .
Procedure .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
117
118
.
.
70 Replacing the Camera.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
119
Procedure .
Postrequisites .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
119
119
Contents
|
9
Download from Www.Somanuals.com. All Manuals Search And Download.
71
System Setup .
Overview
Entering System Setup .
Flashing the BIOS.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
120
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
120
120
72
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
128
Contents
|
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Working Inside Your Computer
Before You Begin
CAUTION: To avoid losing data, save and close all open files and exit
all open programs before you turn off your computer.
1
Save and close all open files, exit all open programs, and turn off your computer.
•
Microsoft Windows 8: Point to the lower/upper-right corner of the screen to open
the Charms sidebar and click Settings Power Shut down.
•
Microsoft Windows 7: Click Start
Shut down.
NOTE: If you are using a different operating system, see the documentation
of your operating system for shut-down instructions.
2
3
4
After the computer shuts down, disconnect it from the electrical outlet.
Disconnect all cables — such as power and USB cables — from your computer.
Disconnect all peripherals from your computer.
Recommended Tools
The procedures in this document require the following tools:
•
•
•
Phillips screwdriver
Torx #5 (T5) screwdriver
Plastic scribe
Before Working Inside Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
|
11
Safety Instructions
Use the following safety guidelines to protect your computer from potential damage and
ensure your personal safety.
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For additional safety
best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION: Only a certified service technician is authorized to remove
the computer cover and access any of the components inside the
computer.
CAUTION: To avoid damaging the computer, ensure that the work
surface is flat and clean.
CAUTION: When you disconnect a cable, pull on its connector or on
its pull-tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When
connecting cables, ensure that the connectors and ports are
correctly oriented and aligned.
CAUTION: To disconnect a network cable, first unplug the cable from
your computer and then unplug the cable from the network device.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal
at the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
Before Working Inside Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
|
12
After Working Inside Your Computer
CAUTION: Leaving stray or loose screws inside your computer may
severely damage your computer.
1
Replace all screws and make sure that no stray screws remain inside your computer.
2
Connect any cables, peripherals, and other parts you removed before working on your
computer.
3
4
Connect your computer to the electrical outlet.
Turn on your computer.
After Working Inside Your Computer
Download from Www.Somanuals.com. All Manuals Search And Download.
|
13
Removing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Close the display and turn the computer over.
Remove the screws that secure the base cover to the computer base.
Slide the base cover toward the front of the computer.
Lift the base cover off.
2
1
1
base cover
2
screws (2)
Removing the Base Cover
|
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Align the tabs on the base cover with the slots on the computer base
2
Slide the base cover toward the back of the computer and align the screws holes on
the base cover with the screw holes on the computer base.
3
Replace the screws that secure the base cover to the computer base.
Replacing the Base Cover
|
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
Remove the base cover. See "Removing the Base Cover" on page 14.
Procedure
1
2
3
Disconnect the battery cable from the system board.
Remove the screws that secure the battery to the computer base.
Using the battery cable, lift and release the battery from the tabs on the
computer base.
2
1
3
4
1
battery cable
battery
2
4
screws (2)
tabs (2)
3
4
5
Turn the computer over and open the display.
Press and hold the power button for five seconds to ground the system board.
Removing the Battery
|
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Slide the battery under the tabs on the computer base.
Align the screw holes on the battery with the screw holes on the computer base.
Replace the screws that secure the battery to the computer base.
Connect the battery cable to the system board.
Postrequisites
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Battery
|
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Memory Module(s) 3 and 4
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access
connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are
located under the keyboard.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Removing the Memory Module(s) 3 and 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|
18
Procedure
1
2
1
computer base
2
memory-module
1
Using your fingertips, carefully spread apart the securing clips at the sides of the
memory-module connector until the memory module pops up.
2
Remove the memory module from the memory-module connector.
1
2
3
1
memory-module connector
memory module
2
securing clips (2)
3
Removing the Memory Module(s) 3 and 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|
19
Replacing the Memory Module(s) 3 and 4
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access
connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are
located under the keyboard.
Procedure
1
Align the notch on the memory module with the tab on the memory-module
connector.
2
Slide the memory module into the connector at a 45-degree angle, and press the
memory module down until it clicks in place.
If you do not hear the click, remove and reinstall the memory module.
NOTE: The computer may not boot if the memory module is not installed correctly.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Memory Module(s) 3 and 4
Download from Www.Somanuals.com. All Manuals Search And Download.
|
20
Removing the Primary Hard Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: To avoid data loss, do not remove the hard drive while the
computer is On or in Sleep state.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Procedure
1
Remove the screws that secure the hard-drive assembly to the computer base.
2
Using the pull-tab, lift the hard-drive assembly off the computer base.
1
2
3
1
screws (4)
2
pull-tab
3
primary hard-drive assembly
Removing the Primary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
21
3
4
5
Disconnect the interposer from the hard drive.
Remove the screws that secure the hard-drive bracket to the hard drive.
Lift the hard-drive bracket off the hard drive.
1
2
3
4
1
screws (4)
hard drive
2
4
hard-drive bracket
interposer
3
Removing the Primary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
22
Replacing the Primary Hard Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
Procedure
1
Place the hard drive in the hard-drive bracket.
2
Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
3
4
5
6
Replace the screws that secure the hard-drive bracket to the hard drive.
Connect the interposer to the hard drive.
Place the hard-drive assembly in the hard-drive bay.
Align the screw holes on the hard-drive assembly with the screw holes on the
computer base.
7
Replace the screws that secure the hard-drive assembly to the computer base.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Primary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
23
Removing the Secondary Hard Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: To avoid data loss, do not remove the hard drive while the
computer is On or in Sleep state.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Procedure
1
2
3
4
Remove the screws that secure the hard-drive assembly to the computer base.
Using the pull-tab, gently lift the hard-drive assembly.
Lift the latch and disconnect the hard-drive cable from the system board.
Lift the hard-drive assembly off the computer base.
1
2
3
1
pull tab
2
screws (4)
3
secondary hard-drive assembly
Removing the Secondary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
24
5
6
7
Disconnect the interposer from the hard drive.
Remove the screws that secure the hard-drive bracket to the hard drive.
Lift the hard-drive bracket off the hard drive.
1
2
3
4
1
hard-drive bracket
hard drive
2
4
screws (4)
interposer
3
Removing the Secondary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
25
Replacing the Secondary Hard Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
Procedure
1
Place the hard drive into the hard-drive bracket.
2
Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
3
4
5
6
Replace the screws that secure the hard-drive bracket to the hard drive.
Connect the interposer to the hard drive.
Place the hard-drive assembly in the hard-drive bay.
Align the screw holes on the hard-drive assembly with the screw holes on the
computer base.
7
Replace the screws that secure the hard-drive assembly to the computer base.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Secondary Hard Drive
Download from Www.Somanuals.com. All Manuals Search And Download.
|
26
Removing the Third Hard Drive (Optional)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: To avoid data loss, do not remove the hard drive while the
computer is On or in Sleep state.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
NOTE: The media bay can accommodate an optical drive, a hard drive, or a
solid-state drive.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Removing the Third Hard Drive (Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
27
Procedure
1
Remove the screws that secure the tertiary hard drive assembly to the
computer base.
2
3
Using the pull-tab, disconnect the hard-drive cable from the system board.
Lift the hard-drive assembly off the computer base.
1
2
3
4
1
pull tab
2
4
hard-drive cable
3
screws (4)
tertiary hard-drive assembly
Removing the Third Hard Drive (Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
28
4
5
6
Disconnect the interposer from the hard drive.
Remove the screws that secure the hard-drive bracket to the hard drive.
Lift the hard-drive bracket off the hard drive.
1
2
3
4
1
screws (4)
hard drive
2
4
hard-drive bracket
interposer
3
Removing the Third Hard Drive (Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
29
Replacing the Third Hard Drive (Optional)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: Hard drives are extremely fragile. Exercise care when
handling the hard drive.
Procedure
1
Align the screw holes on the hard-drive bracket with the screw holes on the
hard drive.
2
3
4
Replace the screws that secure the hard-drive bracket to the hard drive.
Connect the interposer to the hard drive.
Align the screw holes on the hard-drive assembly with the screw holes on the
computer base.
5
6
Replace the screws that secure the hard-drive assembly to the computer base.
Connect the hard-drive cable to the system board.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Third Hard Drive (Optional)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
30
Removing the Wireless Mini-Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Procedure
1
Locate the wirless mini-card on the computer base.
1
2
1
wireless mini-card
2
computer base
Removing the Wireless Mini-Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|
31
2
3
4
Disconnect the antenna cables from the wireless mini-card.
Remove the screw that secures the wireless mini-card to the system board.
Slide and remove the wireless mini-card from the mini-card connector.
1
4
2
3
1
screw
2
4
antenna cables (2)
mini-card connector
3
wireless mini-card
Removing the Wireless Mini-Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|
32
Replacing the Wireless Mini-Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damage, never place cables under the
wireless mini-card.
1
2
3
Align the notch on the wireless mini-card with the tab on the mini-card connector.
Slide the wireless mini-card, at a 45-degree angle, into the mini-card connector.
Press the other end of the wireless mini-card down and replace the screw that
secures the wireless mini-card to the system board.
4
Connect the antenna cables to the wireless mini-card.
The following table provides the antenna-cable color scheme for the wireless
mini-card supported by your computer.
Connectors on the wireless mini-card
Main WLAN + Bluetooth (white triangle)
Auxiliary WLAN + Bluetooth (black triangle)
Antenna-cable color
white
black
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Wireless Mini-Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|
33
Removing the Processor Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Procedure
1
2
3
Loosen the captive screws that secure the processor fan to the computer base.
Gently lift the fan and disconnect the fan cable from the system board.
Lift the fan away from the computer base.
2
1
3
1
captive screws (3)
fan cable
2
processor fan
3
Removing the Processor Fan
|
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Processor Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
Connect the processor-fan cable to the system board.
Place the processor fan in the computer base.
Align the captive screws on the fan with the screw holes on the computer base and
tighten the screws.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 17.
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Processor Fan
|
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Video-card Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 14.
2
Remove the battery. See "Removing the Battery" on page 16.
Procedure
1
2
3
Loosen the captive-screws that secure the video-card fan to the computer base.
Lift the fan away from the computer base
Disconnect the fan cable from the system-board connector.
1
2
3
1
fan cable
fan
2
screws (3)
3
36
|
Removing the Video-card Fan
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Video-card Fan
|
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Video-card Fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Connect the video-card fan cable to the system-board connector.
2
Place the video-card fan in the computer base and align the screws on the fan with
the screw holes on the computer base.
3
Tighten the captive screws that secure the fan to the computer base.
Postrequisites
1
2
3
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Follow the instructions in "After Working Inside Your Computer" on page 13.
38
|
Replacing the Video-card Fan
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Processor Heat Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1
2
3
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the processor fan. See "Removing the Processor Fan" on page 34.
Procedure
1
In sequential order (indicated on the heat sink), loosen the captive screws that
secure the heat sink to the system board.
2
Tilt and lift the heat sink off the computer base.
2
1
1
captive screws (4)
2
processor heat sink
Removing the Processor Heat Sink
Download from Www.Somanuals.com. All Manuals Search And Download.
|
39
Replacing the Processor Heat Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
NOTE: The original thermal grease can be reused, if the original system board
and heat sink are reinstalled together. If either the video card or the heat sink
is replaced, use the thermal pad provided in the kit to make sure that thermal
conductivity is achieved.
1
Align the captive screws on the heat sink with the screw holes on the system board.
2
In sequential order (indicated on the heat sink), tighten the captive screws that
secure the heat sink to the system board.
Postrequisites
1
2
3
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Processor Heat Sink
Download from Www.Somanuals.com. All Manuals Search And Download.
|
40
Removing the Video-Card Heat Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Prerequisites
1
2
3
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Procedure
1
In sequential order (indicated on the heat sink), loosen the captive screws that
secure the heat sink to the system board.
2
Tilt and lift the heat sink off the system board.
2
1
1
video-card heat sink
2
captive screws (4)
Removing the Video-Card Heat Sink
Download from Www.Somanuals.com. All Manuals Search And Download.
|
41
Replacing the Video-Card Heat Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
NOTE: The original thermal grease can be reused, if the original video-card
and heat sink are reinstalled together. If either the video card or the heat sink
is replaced, use the thermal pad provided in the kit to ensure that thermal
conductivity is achieved.
1
Align the captive screws on the heat sink with the screw holes on the system board.
2
In sequential order (indicated on the heat sink), tighten the captive screws that
secure the heat sink to the system board.
Postrequisites
1
2
3
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Video-Card Heat Sink
Download from Www.Somanuals.com. All Manuals Search And Download.
|
42
Removing the Video Card
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
Prerequisites
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
Procedure
1
Remove the screws that secure the video card to the system board.
2
Slide and remove the video card from the video-card connector.
2
1
1
video card
2
screws (2)
Removing the Video Card
|
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Video Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
Insert the video card, at a 45-degree angle, into the video-card connector.
Press the other end of the video card down and replace the screws that secure the
video card to the system board.
Postrequisites
1
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
2
3
4
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Video Card
|
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Removing the Palm Rest
|
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
Lift the connector latch and, using the pull-tab, disconnect the keyboard
daughter-card cable from the system board.
2
Remove the screws that secure the palm-rest assembly to the computer base.
1
2
3
4
1
screws (22)
2
4
computer base
latch
3
keyboard daughter-card cable
Removing the Palm Rest
|
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Using a plastic scribe, pry the palm-rest assembly from the computer base.
CAUTION: Push the palm rest down carefully to avoid scratching
the display.
Push down the palm-rest tabs to release them from the computer base.
1
2
3
1
computer base
tabs
2
palm-rest assembly
3
Removing the Palm Rest
|
47
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
7
Turn the computer over and open the display as far as possible.
Carefully lift the palm-rest assembly off the computer base and place it aside.
Disconnect the status-light board cable from the media-card reader.
Lift the palm-rest assembly off the computer base.
8
1
2
3
1
status-light board cable
palm-rest assembly
2
media-card reader
3
9
Remove the keyboard. See "Removing the Keyboard" on page 53.
10 Remove the power-button board. See "Removing the Power-Button Board" on
page 57.
11 Remove the status-light board. See "Removing the Status-Light Board" on page 60.
12 Remove the keyboard daughter board. See "Removing the Keyboard Daughter Board"
on page 63.
Removing the Palm Rest
|
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Palm Rest
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
Procedure
1
Replace the keyboard daughter board. See "Replacing the Keyboard Daughter Board"
on page 65.
2
3
Replace the status-light board. See "Replacing the Status-Light Board" on page 62.
Replace the power-button board. See "Replacing the Power-Button Board" on
page 59.
4
5
6
Replace the keyboard. See "Replacing the Keyboard" on page 56.
Connect the status-light board cable to the media-card reader.
Align the palm-rest assembly over the computer base and snap the palm-rest
assembly into place.
7
8
9
Close the display and turn the computer over.
Replace the screws that secure the palm-rest assembly to the computer base.
the latch to secure the cable.
Postrequisites
1
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
2
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
3
4
5
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Palm Rest
|
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Memory Module(s) 1 and 2
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access
connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are
located under the keyboard.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
6
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Memory Module(s) 1 and 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|
50
Procedure
1
2
1
memory-module
2
computer base
1
Using your fingertips, carefully spread apart the securing clips at the sides of the
memory-module connector until the memory module pops up.
2
Slide and remove the memory module from the memory-module connector.
1
2
3
1
memory-module connector
memory module
2
securing clips (2)
3
Removing the Memory Module(s) 1 and 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|
51
Replacing the Memory Module(s) 1 and 2
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Your computer supports up to four memory module connectors. You can access
connectors DIMM3 and DIMM4 are located under the base cover. DIMM1 and DIMM2 are
located under the keyboard.
Procedure
1
Align the notch on the memory module with the tab on the memory-module
connector.
2
Slide the memory module into the connector at a 45-degree angle, and press the
If you do not hear the click, remove and reinstall the memory module.
Postrequisites
1
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
2
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
3
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
4
5
6
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Memory Module(s) 1 and 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|
52
Removing the Keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
6
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Keyboard
|
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
CAUTION: The key caps on the keyboard are fragile, easily dislodged,
and time-consuming to replace. Be careful when removing and
handling the keyboard.
1
Remove the screws that secure the keyboard bracket to the palm-rest assembly.
2
Lift the latch and disconnect the keyboard-backlight cable from the keyboard
daughter board.
3
4
5
Slide the keyboard-backlight cable through the keyboard bracket.
Release the keyboard bracket from the tabs on the palm-rest assembly.
Lift the keyboard bracket off the palm-rest assembly.
1
2
3
4
7
5
6
1
tabs
2
4
6
screws (11)
3
5
7
keyboard bracket
keyboard-backlight cable
latch
palm-rest assembly
keyboard daughter board
Removing the Keyboard
|
54
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Lift the latch and disconnect the keyboard cable from the keyboard daughter board.
Lift the keyboard at an angle and release it from the tabs on the palm-rest assembly.
5
1
4
2
3
1
tabs
2
4
keyboard
3
5
latch
keyboard cable
screws (2)
Removing the Keyboard
|
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Slide the keyboard under the tabs on the palm-rest assembly.
2
Align the screw holes on the keyboard with the screw holes on the
palm-rest assembly.
3
4
Replace the screws that secure the keyboard to the palm-rest assembly.
Connect the keyboard cable to the keyboard daughter board and press down on the
latch to secure the cable.
5
6
7
Slide the keyboard-backlight cable through the keyboard bracket.
Slide the keyboard bracket under the tabs on the palm-rest assembly.
palm-rest assembly.
8
9
Replace the screws that secure the keyboard bracket to the palm-rest assembly.
Connect the keyboard-backlight cable to the keyboard daughter board and press
Postrequisites
1
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
2
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
3
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
4
5
6
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Keyboard
|
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Power-Button Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
6
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Power-Button Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
57
Procedure
1
Lift the latch and disconnect the power-button cable from the status-light board.
2
Note of power-button cable routing and peel off the power-button cable from the
palm-rest assembly.
3
4
Remove the screws that secure the power-button board to the palm-rest assembly.
Lift the power-button board, along with its cable, off the palm-rest assembly.
6
1
2
5
3
4
1
power-button cable
status-light board
power-button board
2
4
6
palm-rest assembly
latch
3
5
screws (2)
Removing the Power-Button Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
58
Replacing the Power-Button Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the power-button board with the screw holes on the
palm-rest assembly.
2
3
4
Replace the screws that secure the power-button board to the palm-rest assembly.
Connect the power-button board cable to the status-light board and press down on
the latch to secure the cable.
Postrequisites
1
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
2
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
3
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
4
5
6
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Power-Button Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
59
Removing the Status-Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
6
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Status-Light Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
60
Procedure
1
Lift the latch and disconnect the power-button board cable from the status-light
board.
2
3
Remove the screws that secure the status-light board to the palm-rest assembly.
Lift the status-light board off the palm-rest assembly.
1
2
3
4
1
screws (2)
latch
2
4
power-button board cable
status-light board
3
Removing the Status-Light Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
61
Replacing the Status-Light Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
palm-rest assembly.
2
3
Replace the screws that secure the status-light board to the palm-rest assembly.
Connect the power-button board cable to the status-light board and press down on
the latch to secure the cable.
Postrequisites
1
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
2
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
3
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
4
5
6
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Status-Light Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
62
Removing the Keyboard Daughter Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
6
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Keyboard Daughter Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
63
Procedure
1
2
3
Lift the latch and disconnect the keyboard cable, the keyboard-backlight cable,
and the touchpad cable from the keyboard daughter board.
Remove the screws that secure the keyboard daughter board to the
palm-rest assembly.
Lift the keyboard daughter board, along with its cable, off the palm-rest assembly.
3
2
4
1
5
1
screws (3)
2
4
keyboard-backlight cable
touchpad cable
3
5
keyboard cable
keyboard daughter board
Removing the Keyboard Daughter Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
64
Replacing the Keyboard Daughter Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
Align the screw holes on the keyboard daughter board with the screw holes on
the palm-rest assembly.
Replace the screws that secure the keyboard daughter board to the
palm-rest assembly.
Connect the keyboard cable, the keyboard-backlight cable, and the touchpad cable to
Postrequisites
1
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
2
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
3
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
4
5
6
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replace the battery. See "Replacing the Battery" on page 17.
Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Keyboard Daughter Board
Download from Www.Somanuals.com. All Manuals Search And Download.
|
65
Removing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Speakers
|
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
2
3
Disconnect the speaker cable from the system board.
Remove the screws that secure the speakers to the computer base.
Lift the left speaker, note the speaker-cable routing, and remove the cable from the
routing guides.
4
Lift the speakers, along with the cable, off the computer base.
5
4
1
3
2
1
speaker cable
screws (3)
2
4
left-speaker
3
5
speaker-cable routing
right speaker
Removing the Speakers
|
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
5
6
Align the screw hole on the right speaker with the screw hole on the computer base.
Route the speaker cable through the routing guides.
Align the screw holes on the left speaker with the screw holes on the computer base.
Replace the screws that secure the left speaker to the computer base.
Connect the speaker cable to the system board.
Postrequisites
1
2
3
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
4
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
8
9
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
10 Replace the battery. See "Replacing the Battery" on page 17.
11 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Speakers
|
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the I/O Board
|
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
2
3
Disconnect the right tron-lights cable from the I/O board.
Remove the screws that secure the I/O board to the system board.
Ease the ports on the I/O board out of the slots on the computer base and lift the I/O
board off the computer base.
1
2
3
1
tron-lights (right) cable
I/O board
2
screws (2)
3
Removing the I/O Board
|
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
5
Align the screw holes on the I/O board with the screw holes on the system board.
Press down on the I/O board to connect it to the system board.
Replace the screws that secure the I/O board to the system board.
Postrequisites
1
2
3
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
4
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
8
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
9
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
10 Replace the battery. See "Replacing the Battery" on page 17.
11 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the I/O Board
|
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Media-Card Reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Media-Card Reader
Download from Www.Somanuals.com. All Manuals Search And Download.
|
72
Procedure
1
Lift the latches and disconnect the status-light cable and the media-card reader
cable from the media-card reader.
2
3
Remove the screws that secure the media-card reader to the computer base.
Lift the media-card reader off the computer base.
1
2
5
4
3
1
status-light cable
latches (2)
2
4
media-card reader cable
media-card reader
3
5
screws (3)
Removing the Media-Card Reader
Download from Www.Somanuals.com. All Manuals Search And Download.
|
73
Replacing the Media-Card Reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
computer base.
2
3
Replace the screws that secure the media-card reader to the computer base.
reader and press down on the latches to secure the cables.
Postrequisites
1
2
3
Follow step 5 to step 9 in "Replacing the Palm Rest" on page 49.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
4
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
8
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
9
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
10 Replace the battery. See "Replacing the Battery" on page 17.
11 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Media-Card Reader
Download from Www.Somanuals.com. All Manuals Search And Download.
|
74
Removing the Display Mini-Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Display Mini-Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|
75
Procedure
1
2
3
Lift the latch and disconnect the display mini-card cable from the display mini-card.
Remove the screw that secures the display mini-card to the system board.
Slide and remove the display mini-card from the mini-card connector.
5
4
1
3
2
1
display mini-card cable
display mini-card
screw
2
4
latch
3
5
mini-card connector
Removing the Display Mini-Card
Download from Www.Somanuals.com. All Manuals Search And Download.
|
76
Replacing the Display Mini-Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Slide the display mini-card, at a 45-degree angle, into the mini-card connector.
Replace the screw that secures the display mini-card to the system board.
latch to secure the cable.
Postrequisites
1
2
3
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
4
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
8
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
9
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
10 Replace the battery. See "Replacing the Battery" on page 17.
11 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Mini-Card
|
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Power-Adapter Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Power-Adapter Port
Download from Www.Somanuals.com. All Manuals Search And Download.
|
78
Procedure
1
Remove the screw that secures the power-adapter port bracket to the
computer base.
2
3
Disconnect the power-adapter port cable from the system board.
Lift the power-adapter port off the computer base.
2
3
4
1
1
power-adapter port bracket
power-adapter port
2
4
screw
power-adapter port cable
3
Removing the Power-Adapter Port
Download from Www.Somanuals.com. All Manuals Search And Download.
|
79
Replacing the Power-Adapter Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Align the power-adapter port on the slot on the computer base and slide the
power-adapter port into place.
Align the screw hole on the power-adapter port bracket with the screw hole on
the computer base.
Replace the screw that secures the power-adapter port bracket to the
computer base.
Connect the power-adapter port cable to the system board.
1
2
3
4
5
6
Replace the system board. See "Replacing the System Board" on page 84.
Replace the speakers. See "Replacing the Speakers" on page 68.
Replace the display mini-card. See "Replacing the Display Mini-Card" on page 77.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
7
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
page 30.
11 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
12 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
13 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
14 Replace the battery. See "Replacing the Battery" on page 17.
15 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Power-Adapter Port
Download from Www.Somanuals.com. All Manuals Search And Download.
|
80
Removing the System Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
Remove the battery. See "Removing the Battery" on page 16.
Remove the memory module(s) 3 and 4. See "Removing the Memory Module(s) 3 and
4" on page 18.
4
5
Remove the primary hard drive. See “"Removing the Primary Hard Drive" on page 21.
page 24.
6
page 27.
7
8
9
Remove the wireless mini-card. See "Removing the Wireless Mini-Card" on page 31.
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
page 39.
11 Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
13 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
14 Remove the speakers. See "Removing the Speakers" on page 66.
15 Remove the memory modules(s) 1 and 2. See "Removing the Memory Module(s) 1 and
2" on page 50.
16 Remove the status-light board. See "Removing the Status-Light Board" on page 60.
17 Remove the power-button board. See "Removing the I/O Board" on page 69.
18 Remove the display mini-card. See "Removing the Display Mini-Card" on page 75.
Removing the System Board
|
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
NOTE: Your computer’s Service Tag is located under the system badge. You must
enter the Service Tag in the BIOS after you replace the system board.
NOTE: Before disconnecting the cables from the system board, note the location of
the connectors so that you can reconnect them correctly after you replace the
system board.
1
Disconnect the display cable, display-light board cable, power-adapter port cable,
left tron-lights cable, and front tron-lights cable from the system board.
1
2
5
3
4
1
display cable
2
4
display-light board cable
left tron-lights cables
3
5
power-adapter port cable
front tron-lights cables
Removing the System Board
|
82
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Remove the screws that secure the system board to the computer base.
Lift the system board at an angle and remove the ports on the system board from the
slots on the computer base.
1
2
3
1
screws (3)
2
system board
3
computer base
4
5
Remove the coin-cell battery. "Removing the Coin-Cell Battery" on page 87.
Remove the processor. See "Removing the Processor" on page 90.
Removing the System Board
|
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the System Board
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Replace the processor. See "Replacing the Processor" on page 92.
Replace the coin-cell battery. See "Replacing the Coin-Cell Battery" on page 89.
Slide the ports on the system board into the slots on the computer base.
Align the screw holes on the system board with the screw holes on the
computer base.
5
6
Replace the screws that secure the system board to the computer base.
Connect the display cable, display-light board cable, power-adapter port cable,
Postrequisites
1
Replace the speakers. See "Replacing the Speakers" on page 68.
2
Replace the memory module(s) 1 and 2. "Replacing the Memory Module(s) 1 and 2" on
page 52.
3
4
5
6
Replace the display mini-card. See "Replacing the Display Mini-Card" on page 77.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
7
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
10 Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
11 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
12 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
Replacing the System Board
|
84
Download from Www.Somanuals.com. All Manuals Search And Download.
13 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
14 Replace the battery. See "Replacing the Battery" on page 17.
15 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the System Board
|
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
removing the coin-cell battery.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the speakers. See "Removing the Speakers" on page 66.
13 Remove the power-button board. See "Removing the I/O Board" on page 69.
14 Remove the display mini-card. See "Removing the Display Mini-Card" on page 75.
15 Remove the system board. See "Removing the System Board" on page 81.
Removing the Coin-Cell Battery
|
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
Using a plastic scribe, pry the coin-cell battery from the coin-cell battery socket on
the system board.
2
Lift the coin-cell battery off the system board.
2
1
1
coin-cell-battery
2
system board
Removing the Coin-Cell Battery
|
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
WARNING: The battery may explode if installed incorrectly. Replace
the battery only with the same or equivalent type. Discard used
batteries according to the manufacturer’s instructions.
Procedure
on the system board.
1
2
3
4
5
6
Replace the system board. See "Replacing the System Board" on page 84.
Replace the speakers. See "Replacing the Speakers" on page 68.
Replace the display mini-card. See "Replacing the Display Mini-Card" on page 77.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
7
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
page 30.
11 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
12 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
13 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
14 Replace the battery. See "Replacing the Battery" on page 17.
15 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Coin-Cell Battery
|
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
CAUTION: To prevent intermittent contact between the ZIF-socket
cam screw and the processor when removing the processor, press to
apply slight pressure to the center of the processor while turning the
cam screw.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the speakers. See "Removing the Speakers" on page 66.
13 Remove the power-button board. See "Removing the I/O Board" on page 69.
14 Remove the display mini-card. See "Removing the Display Mini-Card" on page 75.
15 Remove the system board. See "Removing the System Board" on page 81.
16 Remove the coin-cell battery. See "Removing the Coin-Cell Battery" on page 87.
Removing the Processor
|
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket
cam screw counterclockwise until it comes to the cam stop.
CAUTION: To ensure maximum cooling for the processor, do not
touch the heat-transfer areas on the processor or the heat sink.
The oils in your skin can reduce the heat transfer capability of the
thermal pads.
CAUTION: When removing the processor, lift it straight up. Be careful
not to bend the pins on the processor.
2
Lift the processor off the ZIF socket.
1
2
4
3
1
screwdriver
ZIF-socket
2
4
processor
3
ZIF-socket cam screw
Removing the Processor
|
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Processor
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
NOTE: If a new processor is installed, you will receive a new thermal-cooling
assembly, which will include an affixed thermal pad, or you will receive a new thermal
pad along with documentation to illustrate proper installation.
1
Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket,
then place the processor in the ZIF-socket.
NOTE: The pin-1 corner of the processor has a triangle that aligns with the
triangle on the pin-1 corner of the ZIF socket. When the processor is properly
seated, all four corners are aligned at the same height. If one or more corners of
the processor are higher than the others, the processor is not seated properly.
CAUTION: To prevent intermittent contact between the ZIF-socket
cam screw and the processor when replacing the processor, press to
apply slight pressure to the center of the processor while turning the
cam screw.
CAUTION: To avoid damage to the processor, hold the screwdriver
perpendicular to the processor when turning the cam screw.
Replacing the Processor
|
92
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Tighten the ZIF socket by turning the cam screw clockwise to secure the processor to
the ZIF socket.
5
1
2
4
3
1
processor
2
4
3
5
pin-1 corner
screwdriver
ZIF-socket cam screw
Postrequisites
1
2
3
4
5
6
7
Replace the coin-cell battery. See "Replacing the Coin-Cell Battery" on page 89.
Replace the system board. See "Replacing the System Board" on page 84.
Replace the speakers. See "Replacing the Speakers" on page 68.
Replace the display mini-card. See "Replacing the Display Mini-Card" on page 77.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
11 Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
12 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
13 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
14 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
15 Replace the battery. See "Replacing the Battery" on page 17.
Replacing the Processor
|
93
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Processor
|
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Display Assembly
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
Removing the Display Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|
95
Procedure
1
2
3
Disconnect the antenna cables from the wireless mini-card.
Remove the screws that secure the display assembly to the computer base.
Note the antenna cables routings and remove the cables from their routing guides.
1
2
3
4
1
screws (4)
antenna cables routing guide
2
4
computer base
3
antenna cable(s)(3)
Removing the Display Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|
96
4
5
Turn the computer over and open the display as far as possible.
Disconnect the display cable, display mini-card cable, and display-light board cable
from the system board.
6
7
8
Remove the cables from their routing guides.
Remove the screws that secure the display assembly to the computer base.
Lift the display assembly off the computer base.
5
1
4
3
2
1
screws (3)
2
4
display-light board cable
latch
3
5
display cable
display mini-card cable
Removing the Display Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|
97
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display assembly with the screw holes on the
computer base.
2
3
Replace the screws that secure the display assembly to the computer base.
Connect the display cable, display mini-card cable, and display-light board cable
to the system board.
4
5
6
7
Close the display and turn the computer over.
Route the antenna cables through their routing guides on the computer base.
Replace the screws that secure the display assembly to the computer base.
Connect the antenna cables to the wireless mini-card.
Postrequisites
1
2
3
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
4
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
8
9
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
10 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
11 Replace the battery. See "Replacing the Battery" on page 17.
12 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|
98
Removing the Display Bezel
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
Removing the Display Bezel
|
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Display Bezel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
Align the display bezel with the display back-cover, and gently snap the display bezel
into place.
Postrequisites
1
2
3
4
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
5
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
8
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
9
Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
10 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
11 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
12 Replace the battery. See "Replacing the Battery" on page 17.
13 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Bezel
|
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Display Hinges
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
Removing the Display Hinges
|
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
Remove the screws that secure the display hinges to the display back-cover.
2
Lift the display hinges off the display back-cover.
3
2
1
1
display back-cover
screws (6)
2
display hinges (2)
3
Removing the Display Hinges
|
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Display Hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
Route the display cable, display-light board cable, and antenna cable through the
routing guides on the display hinges.
back-cover.
Replace the screws that secure the display hinges to the display back-cover.
Postrequisites
1
2
3
4
5
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
6
7
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
8
9
Replace the tertiary hard drive. See "Replacing the Third Hard Drive (Optional)" on
page 30.
10 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
11 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
12 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
13 Replace the battery. See "Replacing the Battery" on page 17.
14 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Hinges
|
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Display Panel
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
Removing the Display Panel
|
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
2
3
Disconnect the camera cable from the camera.
Remove the screws that secure the display panel to the display back-cover.
Lift the display panel off the display back-cover.
1
2
3
4
1
display panel
2
4
screws (6)
3
display back-cover
camera cable
Removing the Display Panel
|
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Display Panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display panel with the screw holes on the display
back-cover.
2
3
Connect the camera cable to the camera.
1
2
3
4
5
6
Replace the display hinges. See "Replacing the Display Hinges" on page 104.
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
7
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
page 30.
11 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
12 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
13 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
14 Replace the battery. See "Replacing the Battery" on page 17.
15 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Panel
|
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Logo Board
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
14 Remove the display panel. See "Removing the Display Panel" on page 105.
Removing the Logo Board
|
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
Remove the screws that secure the logo board to the display back-cover.
2
Carefully rotate the logo board and disconnect the display light-board cables and
logo-board cable from the logo-board connectors.
3
Lift the logo board off the display back-cover.
4
1
3
2
1
screws (2)
2
4
logo board
3
logo-board cable
display-light board cables (3)
Removing the Logo Board
|
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Logo Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Connect the display light-board cables and logo-board cable to the logo board.
2
Carefully rotate the logo board over and align the screw holes on the logo board with
the screw holes on the display back-cover.
3
Postrequisites
1
2
3
4
5
6
7
Replace the display hinges. See "Replacing the Display Hinges" on page 104.
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
page 30.
12 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
13 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
14 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
15 Replace the battery. See "Replacing the Battery" on page 17.
16 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Logo Board
|
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the Display Mini-Card Cable
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
14 Remove the display hinges. See "Removing the Display Hinges" on page 102.
15 Remove the display panel. See "Removing the Display Panel" on page 105.
Removing the Display Mini-Card Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
|
111
Procedure
1
2
3
Remove the screw that secures the display mini-card cable to the display back-cover.
Peel off the display mini-card cable from the display back-cover.
Lift the display mini-card cable off the display back-cover.
3
2
1
1
display mini-card cable
display back-cover
2
screw
3
Removing the Display Mini-Card Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
|
112
Replacing the Display Mini-Card Cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Adhere the display mini-card cable to the display back-cover.
2
Postrequisites
3
4
5
6
7
Replace the display hinges. See "Replacing the Display Hinges" on page 104.
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
8
9
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
10 Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
page 30.
14 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
15 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
16 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
17 Replace the battery. See "Replacing the Battery" on page 17.
18 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display Mini-Card Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
|
113
Removing the Display-Light Boards
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
14 Remove the display panel. See "Removing the Display Panel" on page 105.
Removing the Display-Light Boards
Download from Www.Somanuals.com. All Manuals Search And Download.
|
114
Procedure
1
Peel the Mylar tapes that cover the display-light boards.
2
1
1
display back-cover
2
Mylar tapes
2
3
Remove the screws that secure the display-light boards to the display back-cover.
Lift the display-light boards off the display back-cover.
2
1
1
display-light boards (3)
2
screws (3)
Removing the Display-Light Boards
Download from Www.Somanuals.com. All Manuals Search And Download.
|
115
Replacing the Display-Light Boards
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the display-light boards with the screw holes on the
display back-cover.
2
3
Replace the screws that secure the display-light boards to the display back-cover.
Adhere the Mylar tapes on the display-light boards.
Postrequisites
1
2
3
4
5
6
7
Replace the display hinges. See "Replacing the Display Hinges" on page 104.
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
page 30.
12 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
13 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
14 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
15 Replace the battery. See "Replacing the Battery" on page 17.
16 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Display-Light Boards
Download from Www.Somanuals.com. All Manuals Search And Download.
|
116
Removing the Camera
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
home page at dell.com/regulatory_compliance.
1
2
3
4
Remove the base cover. See "Removing the Base Cover" on page 14.
Remove the battery. See "Removing the Battery" on page 16.
Remove the secondary hard drive. See "Removing the Secondary Hard Drive" on
page 24.
5
Remove the tertiary hard drive. See "Removing the Third Hard Drive (Optional)" on
page 27.
6
7
8
Remove the processor fan. See “"Removing the Processor Fan" on page 34.
Remove the video-card fan. See "Removing the Video-card Fan" on page 36.
Remove the processor heat sink. See "Removing the Processor Heat Sink" on
page 39.
9
Remove the video-card heat sink. See "Removing the Video-Card Heat Sink" on
page 41.
10 Remove the video card. See "Removing the Video Card" on page 43.
11 Follow step 1 to step 8 in "Removing the Palm Rest" on page 45.
12 Remove the display assembly. See "Removing the Display Assembly" on page 95.
13 Remove the display bezel. See "Removing the Display Bezel" on page 99.
Removing the Camera
|
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Procedure
1
2
3
Disconnect the camera cable from the camera.
Remove the screw that secures the camera to the display back-cover.
Pry and lift the camera off the display back-cover.
3
2
4
1
1
screw
2
4
camera
3
camera cable
display back-cover
Removing the Camera
|
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
1
2
3
4
Place the camera in the display back-cover.
Align the screw holes on the camera with the screw holes on the display back-cover.
Connect the camera cable to the camera.
1
2
3
4
5
6
Replace the display hinges. See "Replacing the Display Hinges" on page 104.
Replace the display bezel. See "Replacing the Display Bezel" on page 101.
Replace the display assembly. See "Replacing the Display Assembly" on page 98.
Replace the video card. See "Replacing the Video Card" on page 44.
Replace the video-card heat sink. See "Replacing the Video-Card Heat Sink" on
page 42.
7
8
9
Replace the processor heat sink. See "Replacing the Processor Heat Sink" on page 40.
Replace the processor fan. See "Replacing the Processor Fan" on page 35.
Replace the video-card fan. See "Replacing the Video-card Fan" on page 38.
page 30.
11 Replace the secondary hard drive. See "Replacing the Secondary Hard Drive" on
page 26.
12 Replace the primary hard drive. See "Replacing the Primary Hard Drive" on page 23.
13 Replace the memory modules. See "Replacing the Memory Module(s) 3 and 4" on
page 20.
14 Replace the battery. See "Replacing the Battery" on page 17.
15 Replace the base cover. See "Replacing the Base Cover" on page 15.
Replacing the Camera
|
119
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Overview
Use system setup to:
•
Get information about the hardware installed in your computer, such as the amount
of RAM, the size of the hard drive, and so on.
•
•
Change the system setup configurations.
Set or change a user-selectable option, such as the user password, type of hard drive
installed, enabling or disabling base devices, and so on.
Entering System Setup
CAUTION: Unless you are an expert computer user, do not change
the settings in the system setup program. Certain changes can make
your computer work incorrectly.
NOTE: Before you change system setup, it is recommended that you write down
the system setup screen information for future reference.
1
Turn on (or restart) your computer.
2
During POST, when the DELL logo is displayed, watch for the F2 prompt to appear and
then press <F2> immediately.
NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt
can appear very quickly, so you must watch for it, and then press <F2>. If you
press <F2> before the F2 prompt, this keystroke is lost. If you wait too long and
the operating system logo appears, continue to wait until you see the operating
system’s desktop. Then, turn off your computer and try again.
System Setup
|
120
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup Screens
The system setup screen displays current or changeable configuration information for
your computer. Information on the screen is divided into three areas: the setup item,
active help screen, and key functions.
Setup Item — This field appears on the left Help Screen — This field appears on
side of the system setup window. This field is the right side of the system setup
a scrollable list containing features that
define the configuration of your computer,
including installed hardware, power
conservation, and security features.
window and contains information about
each option listed in the Setup Item. In
this field you can view information about
your computer and make changes to your
current settings.
Scroll up and down the list with the up- and
down-arrow keys. As an option is
highlighted, the Help Screen displays
more information about that option and
available settings.
Press the up- and down-arrow keys to
highlight an option. Press <Enter> to
make that selection active and return to
the Setup Item.
NOTE: Not all settings listed in the
Setup Item are changeable.
Key Functions — This field appears below the Help Screen and lists keys and their
functions within the active system setup field.
System Setup Options
NOTE: Depending on your computer and installed devices, the items listed in this
section may appear, or may not appear exactly as listed.
Main Menu
System Time (hh:mm:ss)
System Date (mm/dd/yyyy)
BIOS Version
Displays the system time.
Displays the system date.
Displays the BIOS version.
Product Name
Displays the model number of your
computer.
Service Tag
Asset Tag
CPU Type
CPU Speed
CPU ID
Displays the service tag of your computer.
Displays the Asset Tag of your computer.
Displays the type of processor installed.
Displays the speed of the processor.
Displays the processor identification value.
CPU Cache
L1 Cache
Displays the processor’s L1 cache size.
System Setup
|
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
L2 Cache
Displays the processor’s L2 cache size.
Displays the processor’s L3 cache size.
Displays the integrated graphics.
L3 Cache
Integrated Graphics
Discrete Graphics 1
Displays the first discrete graphics installed
on your computer.
Discrete Graphics 2
Displays the second discrete graphics
installed on your computer.
Fixed HDD
SATA ODD
Second HDD
Displays the type of hard drive installed.
Displays the type of optical drive installed.
Displays the type of secondary hard drive
installed.
eSATA Device
mSATA Device
AC Adapter Type
Displays the type of eSATA device installed.
Displays the type of mSATA device installed.
Displays the type of AC adapter connected
to your computer.
Total Memory
Memory Bank 0
Memory Bank 1
Displays the total memory available in your
computer.
Displays the memory size installed in DIMM
0.
Displays the memory size installed in DIMM
1.
Advanced Menu
Intel(R) SpeedStep
Allows you to enable or disable the Intel
SpeedStep technology. Disabling this
feature may improve performance, but will
greatly reduce battery life.
Virtualization
Integrated NIC
Allows you to enable or disable the Intel
Virtualization technology.
Allows you to enable or disable the on-board
LAN controller.
• Disabled: Internal LAN is disabled and is
not visible to the operating system.
• Enabled: Internal LAN is enabled.
System Setup
|
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Menu
USB Emulation
Allows you to enable or disable the USB
emulation feature. This feature defines how
the BIOS, in the absence of a USB-aware
operating system, handles USB devices.
USB emulation is always enabled during
POST.
NOTE: You cannot boot any type of USB
device (floppy, hard drive, or memory key)
when this option is off.
USB Powershare
Allows you to charge USB devices when the
computer is turned off or in standby mode.
• AC Only: Charge USB devices when
connected to AC adapter only.
• AC and Battery: Charge USB devices
when connected to AC adapter and
when the computer is running on
battery.
• Disabled: Disables USB PowerShare.
USB Wake Support
Allows you to enable USB devices to wake
the computer from standby or to disable the
USB wake support feature.
NOTE: If USB Powershare is enabled, a
device connected to the USB Powershare
connector may not wake the computer.
SATA Operation
Allows you to configure the operating mode
of the integrated SATA hard drive controller.
• AHCI: SATA is configured for AHCI
mode.
• RAID: STAT is configured for RAID mode.
Adapter Warnings
Allows you to choose if the computer should
display warning messages when you use AC
adapters that are not supported by your
computer.
Enabled: BIOS will detect unsupported AC
adapters and display an error on the screen.
Function Key Behavior
Touchpad Backlight
Allows you to set function key or
multimedia key as the default function key
behavior.
Allows you to set the touchpad backlight to
be on or in auto mode.
System Setup
|
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Menu
Battery Health
USB debug
Displays the battery health.
Allows you to enable or disable this port for
Windows debugging.
External USB Ports
Allows you to disable or enable the external
USB ports.
Advanced Menu—Performance Options
CPU Turbo Mode
Allows you to disable or enable the
processor turbo mode.
Overclocking Feature
Allows you to disable or enable the global
overclocking feature.
• Disabled: The overclocking feature is
disabled.
• Enabled: Displays additional
overclocking options.
Non-Turbo Flex Support
Allows you to enable or disable non-turbo
flex support.
Flex Ratio Override
Allows you to set the flex ratio override
value.
Extreme Edition
Allows you to disable or choose BIOS or
cTDP.
Extreme Edition Core Ratio Limits
Override Turbo Settings
Allows you to set the extreme edition core
ratio limit.
Allows you to enable or disable the override
turbo settings.
Long Duration PWR Limit
Long Duration Time Window
Set Short Duration PWR Limit
Set Short Duration PWR Limit Options
Allows you to set the turbo mode long
duration power limit.
Allows you to set the turbo mode time 1
value in seconds.
Allows you to enable or disable short
duration power limit.
Allows you to set the turbo mode power
limit 2value in watts.
Bus Clock
Current Frequency
Displays the current bus clock frequency.
System Setup
|
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Menu—Performance Options
New Frequency in 10KHz increments
Allows you to set the bus clock frequency in
increments of 10KHz.
Apply New Bus Clock Frequency
GT Overclocking Frequency
Applies the new bus clock frequency
immediately, temporarily, or permanently.
Allows you to set the GT Overclocking
frequency.
Memory Frequency
DIMM Profile (XMP)
Allows you to set memory frequency.
Allows you to configure different XMP
options.
Wireless Menu
Bluetooth
Allows you to enable or disable the internal
Bluetooth device.
• Disabled: The internal Bluetooth device
is disabled and is not visible to the
operating system.
• Enabled: The internal Bluetooth device is
enabled.
Wireless Network
Allows you to enable or disable the internal
wireless device.
• Disabled: The internal wireless device is
disabled and is not visible to the
operating system.
• Enabled: The internal wireless device is
enabled.
DMC
Allows you to enable or disable the internal
DMC device.
Wireless Switch/Hotkey
Allows you to disable all internal wireless
devices.
System Setup
|
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Menu
Admin Password
Displays if the administrator password is
clear or set.
System Password
Service Tag
Displays if the system password is clear or
set.
Displays the service tag of the computer
when the service tag is present.
Displays a field to input the service tag
manually when the service tag is absent.
Admin Password
System Password
Computrace
Allows you to set the administrator
password. The administrator password
controls access to the system setup utility.
Allows you to set the system password. The
system password controls access to the
computer at boot.
Allows you to disable, activate, or deactivate
Computrace security feature.
Boot Menu
Use the up or down arrow keys to change the boot device priority. You can choose from:
•
•
•
•
•
Hard Drive
USB Storage
CD/DVD/BD
Removal Devices
Network
System Setup
|
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit Menu
Exit Saving Changes
Allows you to exit System Setup and save
your changes to CMOS.
Save Change Without Exit
Exit Discarding Changes
Allows you to remain in System Setup and
save your changes to CMOS.
Allows you to exit System Setup and load
previous values from CMOS for all Setup
items.
Load Optimal Defaults
Discard Changes
Allows you to load default values for all
Setup items.
Allows you to load previous values from
CMOS for all Setup items.
System Setup
|
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Flashing the BIOS
You may need to flash (update) the BIOS when an update is available or when you replace
the system board. To flash the BIOS:
1
2
3
Turn on the computer.
Go to dell.com/support.
If you have your computer's Service Tag, type your computer's Service Tag and
click Submit.
If you do not have your computer's Service Tag, click Detect Service Tag to allow
automatic detection of the Service Tag.
NOTE: If the Service Tag cannot be detected automatically, select your product
under the product categories.
4
5
Click Drivers and Downloads.
In the Operating System drop-down, select the operating system installed on
your computer.
6
7
Click BIOS.
Click Download File to download the latest version of the BIOS for your computer.
On the next page, select Single-file download and click Continue.
8
9
Save the file and once the download is complete, navigate to the folder where you
saved the BIOS update file.
10 Double-click the BIOS update file icon and follow the instructions on the screen.
Flashing the BIOS
|
128
Download from Www.Somanuals.com. All Manuals Search And Download.
|