7214 MSL
®
Loader
Part No. F-3778
Published 12/04
OPERATOR’S MANUAL
This Operator’s Manual is an integral part of the safe operation
of this machine and must be maintained with the unit at all
times. READ, UNDERSTAND, and FOLLOW the safety and
Operation Instructions contained in this manual before
operating the equipment.
RHINO®
1020 S. Sangamon Ave.
Gibson City, IL, 60936
800-446-5158
Email: [email protected]
© 2004 Alamo Group, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SAFETY SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Hazard Signal Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Decal Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Safety Decals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
INTRODUCTION SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
ASSEMBLY SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Dismounting and Mounting Loader to Tractor . . . . . . . . . . . . . . . . . . . . . . . 3-2
Mounting Attachment To Loader, Dismounting Attachment From Loader . . . . . . . . . 3-3
OPERATION SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Preparing Tractor, Operating Loader, Filling Bucket . . . . . . . . . . . . . . . . . . . . 4-2
Lifting Load, Carrying Load, Dumping Bucket, Lowering Bucket. . . . . . . . . . . . . . 4-3
Operating Float Control, Loading From Bank . . . . . . . . . . . . . . . . . . . . . . . 4-4
Peeling & Scraping, Loading Truck & Spreaders From Pile, Backfilling . . . . . . . . . . 4-5
Handling Large Heavy Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Operating Grapple Fork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Operating Bale Spear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Operation of MSL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
MAINTENANCE SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Daily Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Lift Cylinder Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Tilt Cylinder Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Replacing Wear Bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Adjusting Bucket Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Hydraulic Trouble Shooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Torque Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
F-3778-12-04
Rhino is a registered trademark of Alamo Group Inc.
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
SECTION
Safety Section 1-1
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
SAFETY PRECAUTIONS
Whenever you see this symbol
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
It means:
F-3778-12-04
Safety Section 1-2
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
PELIGRO!
DANGER!
WARNING!
WARNING!
WARNING!
WARNING!
DANGER!
F-3778-12-04
Safety Section 1-3
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
DANGER!
DANGER!
DANGER!
DANGER!
WARNING!
WARNING!
F-3778-12-04
Safety Section 1-4
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
DANGER!
DANGER!
WARNING!
WARNING!
F-3778-12-04
Safety Section 1-5
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
WARNING!
DANGER!
DANGER!
DANGER!
WARNING!
DANGER!
DANGER!
F-3778-12-04
Safety Section 1-6
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
WARNING!
DANGER!
DANGER!
WARNING!
SAFETY HAZARD SIGNAL WORDS
!
THIS SAFETY SYMBOL MEANS
ATTENTION!
WARNING
CAUTION
BECOME ALERT!
YOUR SAFETY IS
INVOLVED!
F-3778-12-04
Safety Section 1-7
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
8
1
C
L
5
7
3
9
4
6
LEFT SIDE OF LOADER
8
2
5
3
6
9
RIGHT SIDE OF LOADER
11
10
12
M
A
S
’
NU
R
A
O
L
T
A
R
P
O
13
LEFT SIDE
LEFT MID
MOUNTING
BRACKET
INSIDE
13
MANUAL CANISTER
F-3778-12-04
© 2004 Alamo Group Inc.
Safety Section 1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
ITEM PART NO. QTY.
TYPE
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
49695
51447
48434
46776
51902
49703
48858
35674-5
48322
47730
48921
46779
00776031
1
1
2
1
2
2
1
2
2
1
1
1
1
LOGO
LOGO
DANGER
WARNING
WARNING
MODEL
DANGER
STRIPE
DANGER
WARNING
DANGER
WARNING
Rhino, Left
Rhino, Right
Loader Safety
Loader Safety
Loader Removal/Reinstallation Safety
7214
Electric Shock
White, 54"
Support Loader
Handling Bales/Do Not Carry People
Use ROPS, Seatbelt, Rear Ballast
Bucket Shift (Suspended Front Axle Only)
MANUAL CANISTER Read Operator’s Manual
F-3778-12-04
Safety Section 1-9
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
DANGER
DANGER
DANGER
Use ROPS and seatbelt at
all times.
Add recommended rear
ballast.
Operate tractor at low speeds.
Failure to comply may result in
serious injury or death.
48921
Keep bucket and boom away
from overhead electric lines.
Do not walk or work under a
raised loader.
Failure to comply will result in
Lower loader to ground
when parked.
serious injury or death.
48858
Failure to comply may result
in serious injury and/or death.
48434
WARNING
DANGER
TO SUPPORT
LOADER ARMS
Raise loader, place
loader support onto
left cylinder rod and pin.
Slowly lower loader until
support takes the load.
Loader support must be
installed prior to working
under raised loader. Failure
to comply may result in
TO REMOVE SUPPORT
Raise loader, remove pin, and
support, then store.
Do not handle round bales or large
objects unless loader is equipped
with proper attachments.
Operate loader only with approved
hydraulic valves.
serious injury or death.
48322
Handle raised loads with caution.
Carry loads low.
Failure to comply may result in
serious injury and/or death.
WARNING
WARNING
WARNING
TO AVOID INJURY
DURING REMOVAL
OR REINSTALLATION
OF LOADER
LOADER SAFETY
Know all operation,
warning and safety
instructions in the
operator’s manual
Read and
understand
instructions in
operator’s manual
before operating the loader.
Operate loader only from
operator’s seat.
Do not lift or carry anybody in
loader or work from bucker or any
other attachment.
Carry bucket low during
transport for better visibility
and to avoid overturns.
Failure to comply may result
Make sure detached loader
is parked on hard, level
ground.
Always have a bucket
mounted to loader when it
is removed from tractor.
in serious injury or death.
47730
Use wheel ballast and / or
rear weight for stability as
recommended in the
operator’s manual.
Do not permit bystanders
within 10 feet of loader.
When parking or servicing
unit, lower the bucket to the
ground, stop engine, and
set the parking brake to
avoid tractor movement.
Do not remove bucket or
repair loader if it is not
mounted on tractor.
Failure to comply could
cause loader to collapse.
WARNING
When the loader is mounted to
a tractor with SuperSteer™
the bucket will shift in
the opposite direction
from which the
,
Failure to follow any of
the instructions above
can cause serious injury
to the operator or other
persons in are.
Failure to follow above
instructions can cause
front wheels are turned.
Maximum shift will be approximately
8 inches and most noticeable when the
tractor is stationary.
serious injury.
51902
(Replacement manuals are
available from your dealer.)
Failure to heed this warning can result
in serious injury to the operator or
46776
other persons.
46779
F-3778-12-04
© 2004 Alamo Group Inc.
Safety Section 1-10
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
®
®
M
A
NU
S
’
A
R
L
O
T
A
R
P
O
INSIDE
F-3778-12-04
Safety Section 1-11
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY
FEDERAL LAWS AND REGULATIONS
This section is intended to explain in broad terms the concept and effect of federal laws and regulations
concerning employer and employee equipment operators. This section is not intended as a legal
interpretation of the law and should not be considered as such.
Employer-Employee Operator Regulations
U.S. Public Law 91-596 (The Williams-Steiger Occupational and Health Act of 1970) OSHA
This Act Seeks:
“...to assure so far as possible every working man and woman in the nation safe and healthful
working conditions and to preserve our human resources...”
DUTIES
Sec. 5 (a) Each employer-
(1) shall furnish to each of his employees employment and a place of employment which are free
from recognized hazards that are causing or are likely to cause death or serious physical harm to
his employees;
(2) shall comply with occupational safety and health standards promulgated under this Act.
(b) Each employee shall comply with occupational safety and health standards and all rules,
regulations and orders issued pursuant to this Act which are applicable to his own actions and
conduct.
OSHA Regulations
OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter,
the employer shall instruct every employee in the safe operation and servicing of all equipment
with which the employee is, or will be involved.”
Employer Responsibilities:
To ensure employee safety during Tractor and Implement operation, it is the employer’s responsibility to:
1. Train the employee in the proper and safe operation of the Tractor and Implement.
2. Require that the employee read and fully understand the Tractor and Implement Operator’s manual.
3. Permit only qualified and properly trained employees to operate the Tractor and Implement.
4. Maintain the Tractor and Implement in a safe operational condition and maintain all shields and guards
on the equipment.
5. Ensure the Tractor is equipped with a functional ROPS and seat belt and require that the employee
operator securely fasten the safety belt and operate with the ROPS in the raised position at all times.
6. Forbid the employee operator to carry additional riders on the Tractor or Implement.
7. Provide the required tools to maintain the Tractor and Implement in a good safe working condition and
provide the necessary support devices to secure the equipment safely while performing repairs and
service.
8. Require that the employee operator stop digging if bystanders or passersby come within 10 yards.
Child Labor Under 16 Years of Age
Some regulations specify that no one under the age of 16 may operate power machinery. It is your
responsibility to know what these regulations are in your own area or situation. (Refer to U.S. Dept. of
Labor, Employment Standard Administration, Wage & Home Division, Child Labor Bulletin #102.)
F-3778-12-04
Safety Section 1-12
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
SECTION
Introduction Section 2-1
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
INTRODUCTION
NOTE: This safety alert symbol identifies important safety messages in this manual.
Observe and follow all safety messages to prevent personal injury.
If at any time you have a service problem with your loader or need new parts, contact your local dealer.
Your dealer will need your loader model number and serial number to give you prompt efficient service.
Parts orders must give complete description, correct part number, total amount required, model number,
all necessary serial numbers, method of shipment and shipping address.
F-3778-12-04
Introduction Section 2-2
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
7214 SPECIFICATIONS
Break-away Capacity
At Pivot Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9260 #
800mm Forward of Pivot Point. . . . . . . . . . . . . . . . . . . . . 8540 #
Lift capacity at Full Height
At Pivot Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5840 #
800mm Forward of Pivot Point. . . . . . . . . . . . . . . . . . . . . 5140 #
Raising Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 sec.
Lowering Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6 sec.
Attachment Dumping Time. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 sec.
Attachment Rollback Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 sec.
Weight w/ Average Mounting Kit, Hose Kit, and 96" HD Material Bucket. . . . . 3603 #
Lift Cylinder:
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.88 in.
Piston Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.50 in.
Rod Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75 in.
Bucket Cylinder:
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.00 in.
Piston Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.50 in.
Rod Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75 in.
(A) Maximum Lift Height at Pivot Pin . . . . . . . . . . . . . . . . . . . . . . 169 in.
(B) Maximum Height Under Bucket. . . . . . . . . . . . . . . . . . . . . . . 159 in.
(C) Clearance with Bucket Dumped . . . . . . . . . . . . . . . . . . . . . . 133 in.
(D) Reach at Maximum Height. . . . . . . . . . . . . . . . . . . . . . . . . 44 in.
(E) Maximum Dump Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . 71°
(F) Reach with Attachment on ground . . . . . . . . . . . . . . . . . . . . . 103 in.
(G) Attachment Rollback Angle . . . . . . . . . . . . . . . . . . . . . . . . 39°
(H) Digging Depth
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 in.
(J) Overall Height in Carry Position . . . . . . . . . . . . . . . . . . . . . . 89 in.
E
D
A
B
C
J
G
F
H
(Manufacturers estimated specifications and design subject to change without notice.)
F-3778-12-04
Introduction Section 2-3
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
SECTION
Assembly Section 3-1
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
DISMOUNTING LOADER AND MOUNTING LOADER TO TRACTOR
Figure B
STORAGE
POSITION
OPERATION
POSITION
Remove linch
pin and hitch pin
to fold down
Secure parking
stand down
with hitch pin
and linch pin
Figure A
parking stand
loader
upright
pin
Figure C
Right Side View
mount vertical
stop surface
Linch Pin
mount pin
saddle
1"
Hitch Pin
Figure D
DISMOUNTING LOADER
F-3778-12-04
Assembly Section 3-2
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
MOUNTING LOADER
F-3778-12-04
Assembly Section 3-3
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
DISMOUNTING AND MOUNTING BUCKET OR ATTACHMENT TO LOADER
Lift Handle
Pull Back
Lift Handle
Pull Back
Level indicator Level Indicator
bracket Rod
F-3778-12-04
© 2004 Alamo Group Inc.
Assembly Section 3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
SECTION
Operation Section 4-1
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-2
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-3
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-4
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-5
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
DANGER
•
•
•
•
•
•
•
SAFE OPERATION
IS YOUR BEST PROTECTION
AGAINST ACCIDENTS
F-3778-12-04
Operation Section 4-6
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
•
•
•
•
•
•
•
F-3778-12-04
Operation Section 4-7
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-8
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-9
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
F-3778-12-04
Operation Section 4-10
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
OPERATION AND NOMENCLATURE OF MSL
(Mechanical Self Leveling) LOADER
MSL Triangular
Pivot Plate
MSL
Linkage
Boom
Loader
Upright
Tilt
Cylinder
Lift Cylinder
Four-Bar
Linkage
Attachment
Link
Guide
Link
Tilt Dump
Stop
Tilt Cylinder
Base End
Quick-Attach
Bracket
Relief
Cartridge
Tilt Cylinder
Rod End
Relief Valve
Cartridge
F-3778-12-04
© 2004 Alamo Group Inc.
Operation Section 4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
SECTION
Maintenance Section 5-1
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
•
•
•
DAILY MAINTENANCE
•
•
•
•
•
GREASE
POINTS
F-3778-12-04
Maintenance Section 5-2
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
13
Lips of seal
(3) must face
inward.
7
6
5
5
4
4
2
3
14
3
6
7
4
2
1
13
15
12
10
11
14
9
10
LIFT CYLINDER
11
8
9
15
8
CYLINDER SERVICE
F-3778-12-04
Maintenance Section 5-3
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
2
Lips of seal
(7) must face
inward.
4
5
7
14
11
12
13
21
20
12
6
9
11
10
9
23
1
8
13
12
12
7
11
6
11
5
19
4
14
18
22
7
9
3
17
Lips of seal
(7) must face
inward.
16
15
7
16
15
18
9
TILT CYLINDER
F-3778-12-04
Maintenance Section 5-4
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Level indicator Level Indicator
bracket Rod
THIS SAFETY SYMBOL MEANS
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS
INVOLVED!
F-3778-12-04
Maintenance Section 5-5
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
F-3778-12-04
Maintenance Section 5-6
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
GENERAL TORQUE SPECIFICATIONS
USE THE FOLLOWING TORQUES WHEN SPECIAL TORQUES ARE NOT GIVEN
AMERICAN STANDARD CAP SCREWS
5
METRIC CAP SCREWS
8.8
SAE
Grade
8
Metric Class
10.9
Typical
Grade ID
Markings
on Head
Typical
Grade ID
Markings
on Head
Cap
Screw
TORQUE
FT-LBS
TORQUE
FT-LBS
Cap Screw
Size
TORQUE
TORQUE
Size
Inches
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
N·m
MAX
N·m
FT-LBS
N·m
MAX
FT-LBS
MIN MAX
N·m
MIN MAX
6.25 7.25
MIN
8.5
11
MIN
8.25
10.5
18.5
23
MAX MIN MAX Millimeters
MIN
MAX
8
MIN
8
MIN
12
MAX
15
10
12
9.5
12
11
14
25
31
13
16
M6 x 1.00
M8 x 1.25
6
11
27
9
11
27
8
9
16
20
21.5
39
23
31
36.5
70
14
15
19
20
20
27 M10 x 1.50
34 M12 x 1.75
29
35
47
42
52
57
17.5
26
19
23
26
25
52
62
70
84
75
91
102
163
238
325
465
639
812
123
198
293
398
577
780
992
28
35
38
35
37
47.5 50 M14 x 2.00
55.5 61 M16 x 2.50
74.5 81 M18 x 2.50
85
103
158
210
301
404
517
779
1066
115
176
233
335
450
573
863
1181
139
214
284
408
547
700
1055
1444
120
176
240
343
472
599
898
146
216
294
426
576
732
1098
31
34
42
46
41
45
130
172
247
332
423
637
872
41
45
55.5
69
61
55
60
51
55
74.5
97.5
114
142
167
188
228
355
409
523
607
802
1003
68
75
92
102 M20 x 2.50
65
72
88
86
96
116 130 M22 x 2.50
138 152 M24 x 3.00
172 190 M27 x 3.00
200 222 M30 x 3.00
228 251
76
84
103
129
150
171
206
322
371
474
551
728
908
102
127
148
168
203
318
365
466
543
716
894
112
140
164
185
224
350
402
515
597
790
95
105
123
139
168
262
305
386
448
592
740
1217 1488
1658 2027
111
126
152
238
274
350
407
537
670
1224 1496
275 304
431 474
495 544
631 698
736 809
970 1070
NOTE: These values apply to fasteners as
received from supplier, dry or when lubricated
with normal engine oil. They do not apply if
special graphite or molydisulphide greases or
other extreme pressure lubricants are used.
7/8-14
1-8
1-14
987 1211 1337
O-Ring Face Seal Hose/
Tube Swivel Nut
Torque Specifications for
SAE O-Ring Fittings
Assembly Torque
Thread
Size
(in.)
Swivel Swivel Nut
Nut Hex Torque
Size
Metric
Tube
O.D.
Dash
Size
Swivel Nut
Size
in.·lb.
ft.·lb.
F.F.F.T.
or Hose
5/16-24
3/8-24
N·m lbf·ft
(in.)
(mm)
2
3
90
5
7.5 0.5
1
1
1
1
.25
.25
.25
.25
5
6
-3
-4
--
9/16 - 18
--
--
-- --
170 10
220 15
260 15
320 20
570 25
1060 50
14
18
1
1
1
2
2
5
11/16 16 12
-- -- --
4
7/16-20
1/2-20
8
-5
5
22
10
12
16
20
22
25
32
38
50.8
-6
11/16 - 16 13/16 24 18
13/16 - 16 15/16 50 37
6
9/16-18
3/4-16
27
1.5 .25
1.5 .25
1.5 .25
1.5 .25
1.5 .25
1.5 .25
1.5 .25
1.5 .25
1.5 .25
-8
8
48
-10
1 - 14
1-1/8
69 51
10
12
14
16
20
24
32
7/8-14
90
-12 1-3/16 - 12 1-3/8 102 75
-14 1-3/16 - 12 -- 102 75
1 1/16-12 1300 50
1 3/16-12 1750 75
110
145
5
6
6
-16 1-7/16 - 12 1-5/8 142 105
-20 1-11/16 - 12 1-7/8 190 140
1 5/16-12 1920 125 160
1 5/8-12 2700 150 225 12
1 7/8-12 3000 150 250 12
2 1/2-12 3900 200 325 15
-24
-32
2 - 12
--
2-1/4 217 160
-- -- --
Torque Specifications for
37° JIC Fittings
Assembly Torque
Tube
Swivel Nut
or Hose
Connection
F.F.F.T
Thread
Size
Connection
F.F.F.T
Size
in.·lb.
ft.·lb.
-4
-5
-6
-8
7/16-20
1/2-20
9/16-18
3/4-16
140 10
180 15
250 15
550 25
12
1
1
1
5
5
2
2
2
15
21
2
1 1/2
1 1/2
1 1/4
1
1 1/4
45
1
1
1
1
1
1
-12 1 1/16-12 1000 50
-16 1 5/16-12 1450 50
85
120
5
-20
-24
-32
1 5/8-12 2000 100 170 10
1 7/8-12 2400 150 200 15
2 1/2-12 3200 200 270 20
1
1
1
F-3778-12-04
Maintenance Section 5-7
© 2004 Alamo Group Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
RHINO
®
RHINO
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE OWNER/OPERATOR/DEALER
In addition to the standard Limited Warranty shown on the facing page, Rhino also provides:
1.
A TWO-YEAR (24 months) LIMITED WARRANTY* on non-perishable structural items such as: Loader
Boom, Side Frames, Mount Brackets, Backhoe Boom, Dipper, Main Frame, Stabilizer Legs, Swing
Bracket, Subframe and Related Mounting Brackets provided they have not been subjected to abuse or mis-
use and have been properly maintained as noted.
NOTE – “properly maintained” specifically includes, but is not limited to:
A) Regular lubrication.
B) Using proper amounts of correct hydraulic fluid.
C) Regular torque inspection of all fasteners.
2.
*WARRANTY LIMITATIONS – Warranty is ONE-YEAR (12 months) for hydraulic cylinders and seals, pivot
pins, wear bushings, hydraulic hoses, buckets or other attachments, wear or cutting edges and tooth bars.
After one year (12 months) standard warranty, these items are considered “Wearing Perishable Parts” and
replacement is the users’ responsibility.
Download from Www.Somanuals.com. All Manuals Search And Download.
®
TO THE OWNER/OPERATOR/DEALER
To keep your implement running efficiently and safely, read your manual thoroughly
and follow these directions and the Safety Messages in this Manual. The Table of
Contents clearly identifies each section where you can easily find the information you
need.
The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes
these minimum safety requirements of tractor operators:
REQUIRED OF THE OWNER:
1. Provide a Roll-Over-Protective Structure that meets the requirements of
this Standard; and
2. Provide Seatbelts that meet the requirements of this paragraph of this
Standard and SAE J4C; and
3. Ensure that each employee uses such Seatbelt while the tractor is moving;
and
4. Ensure that each employee tightens the Seatbelt sufficiently to confine the
employee to the protected area provided by the ROPS.
REQUIRED OF THE OPERATOR
1. Securely fasten seatbelt if the tractor has a ROPS.
2. Where possible, avoid operating the tractor near ditches, embankments,
and holes.
3. Reduce speed when turning, crossing slopes, and on rough, slick, or
muddy surfaces.
4. Stay off slopes too steep for safe operation.
5. Watch where you are going especially at row ends, on roads, and around
trees.
6. Do not permit others to ride.
7. Operate the tractor smoothly no jerky turns, starts, or stops.
8. Hitch only to the drawbar and hitch points recommended by the tractor
manufacturer.
9. When the tractor is stopped, set brakes securely and use park lock, if
available.
Keep children away from danger all day, every day...
Equip tractors with rollover protection (ROPS)
and keep all machinery guards in place...
Please work, drive, play and live each day with care
and concern for your safety and that of your family
and fellow citizens
Download from Www.Somanuals.com. All Manuals Search And Download.
®
7214 MSL-SOM-12-04
Printed In U.S.A.
P/N F-3778
Download from Www.Somanuals.com. All Manuals Search And Download.
|