Rev. 1.2
Quick Installation Guide
300N Wireless Cardbus Adapter
Model #AWLC6080
Package Content:
•
•
•
Wireless Cardbus Adapter
Driver & Utility CD
Quick Installation Guide
Step 3 The Autorun screen will pop up. Select Install Utility and Driver from the
menu.
Section 1
Install Utility Software
This Quick Installation Guide only provides basic instructions. For more advanced
features such as configuring encryption settings, please refer to the User’s
Manual on the provided CD.
Note: Be sure to power off your computer before inserting the Cardbus adapter.
Step 1 Insert the Cardbus adapter into an available Cardbus slot and turn on your
computer.
Step 2 After turning on the computer, Windows will launch the Found New
Hardware Wizard. The Found New Hardware Wizard appears differently
depending on your operating system. Click Cancel to quit the wizard and insert
the Installation CD into your CD drive.
Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and
type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
For Windows Vista, click the Install this driver software anyway button when Step 8 After the computer is restarted, Windows will ask to connect to Windows
the security warning appears.
Update, select No, not this time and click Next. If this screen does not appear,
you can skip to Section 2.
Step 7 Click Yes, I want to restart my computer now and then Finish to
restart your computer.
Step 9 Select Install the software automatically and click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 10 Click Continue Anyway at the Windows Logo Screen. (For Windows
2000, click Yes at the Digital Signature Not Found prompt).
Step 11 Click Finish.
Section 2
For Windows Vista, click the Install this driver software anyway button when
the security warning appears.
Configuring the Wireless Adapter
Note to Windows XP Users:
You must disable the Wireless Zero Configuration Utility. Please follow the steps
below to disable XP’s wireless utility. Windows Vista users can skip the following
instructions and go to Step 1
Double-click on the Wireless Network Connection Icon in the system tray and
then click on Properties or Advanced.
Download from Www.Somanuals.com. All Manuals Search And Download.
When the new wireless network connection properties window appears, go to the
Wireless Networks tab, uncheck the Use Windows to configure my wireless
network settings check box and click OK.
Step 2 Go to the AP List tab, select the SSID (Network Name) of the wireless
network you wish to connect to, and click Connect.
If the network you are attempting to connect to is configured for encryption, you
will see an orange lock icon next to the network.
Step 1 To open the utility, double click on the Wireless Monitor icon in the
system tray at the bottom right-hand corner of your screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
When you click on it and click connect, a box will pop up requesting the wireless
Troubleshooting:
encryption key for the router. Enter the encryption key into the box and click OK.
If you are experiencing problems with the connection (unable to connect, low
signal strength, slow connection speed, not working, unstable wireless connec-
tion) you will want to tune your router’s signal by changing channels on the
router.
You do not need to change the channel on the card; it will automatically pick up the
new channel after you reboot. The only channel that you need to change is the
channel of the router.
Your router has 11 different channels to choose from. Start with channel 1 and work
your way up. Each time you change the channel on the router, make sure that you
restart the wireless computer before trying to connect again. Keep going through
the channels until you find one that gives you a stable connection.
For instructions on changing channels, refer to the manual CD that came with your
router.
Step 3 You should now be connected. You should see “Connected” in the top,
right hand corner, and there will be a blue circle around the antenna icon next to
the network name.
Section 3
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
*Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 1.0.Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix
of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual
data throughput rate. Specifications are subject to change without notice. All products and trademarks are the property of their respective
owners. Copyright ©2007 AirLink101®
Download from Www.Somanuals.com. All Manuals Search And Download.
|