Quick Start
Guide
Simple Steps
To Get Your “Trellis-Ready”
PRO200
Up and Growing
Congratulations
on your purchase of the aerogarden Pro200!
With this upgraded AeroGarden you get all the features of the original AeroGarden,
enhanced with…
• “24-Hour Light” Setting – that lets you override the built-in light timer and decide
how much light your plants receive (see details on page 10).
• 24” Extendable Arm – which gives you the flexibility to grow tall plants, such as
full-size tomato plants and bell peppers.
• Enhanced Lamp Hood – with 3 Deluxe Grow Bulbs, providing more light than the
original Grow Bulbs, giving larger plants the light needed to grow and thrive.
• “Replace Grow Bulbs” Indicator – alerts you to replace Deluxe Grow Bulbs. With
this feature, you’ll be sure plants are always getting the right intensity and full spec-
trum of light needed for optimal growth.
• Optional Deluxe Trellis System (not included) – lets you easily support heavy,
fruit-filled branches on full-size plants such as tomatoes, peppers and cucumbers.
Date Code:
Model #s: 100733-DSS
input Voltage: 115V, 60Hz, 1.5a
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Assembly
(No tools required)
1
Unpack Your AeroGarden
Insert Lamp Arm
into Base
A
B
200
PRO
Lamp Hood
(front view)
Push
Lamp Arm
down until
you hear
a “click.”
Lamp Arm
(back view)
Bowl
(front view)
Lamp Arm
(back view)
Base
(back view)
Base
(front view)
D
Plug Lamp Cord
into Lamp Hood
Deluxe Grow Bulbs (3)
2 Seed Kits
Push Lamp Cord
Insert Deluxe Grow Bulbs
into Lamp Hood
C
firmly into socket
in Lamp Hood.
Lamp
Cord
Lamp Hood (bottom view)
Push straight in.
DO NOT TWIST BULBS!
remember to replace Grow Bulbs every 6 months.
2
instructions Continued on next Page
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Assembly
(continued)
1
F
Place Lamp Hood
on Lamp Arm
Set Bowl into Base
E
Center hands
over Lamp Arm
and push Lamp
Hood down
until you hear a
“click.”
(back view)
(front view)
Check to be sure that Bowl
is securely in place.
G
Moving Your
AeroGarden PRO200
need additional HelP?
For supplies and information, visit…
Use one hand to
grasp Lamp Arm
.
Gently slide AeroGarden
toward the surface edge and
place other hand under Base
.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Place Your Garden
H
In: A 60-75°F
(16-24°C)
environment
(optimal)
Under: A space that
Near: A standard
electrical outlet, per
local regulations
allows 35” (89cm)
clearance for the full
height of raised lamp
68°F/20°C
On: A sturdy, water-
tolerant surface
(Metal surfaces may cause
noise due to vibration)
note: do not place beneath
under-cabinet lights.
Away From
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Planting Your Garden
2
A
Add Water Using a Spouted Container
Use room temperature municipal tap, bottled or
purified water. Do not use well or softened water.
Lift
View door
Fill to “Fill to Here”
Amount of
(located inside Bowl)
Water To Be
Added:
3.5 quarts or...
3.2 liters
When additional water is needed, “Water Level Low” light on Control Panel will blink.
Add water to raise level up to “Fill To Here” inside Bowl.
It is okay to add water up to “Fill To Here” before “Water Level Low” light blinks.
Plant Your Garden
comes with a gourmet Herb seed Kit for planting
pre-seeded pods and a Master gardener Kit for planting your own seeds.
B
200
The aerogarden Pro
gourmet Herb Kit: insert seed Pods into
grow surface openings. Check to see that…
• Seed Pods are in the same position on
Grow Surface as they were in Seed Kit Tray.
• Seed Pod Labels are facing forward.
• Seed Pods are pressed firmly in place.
Seed Pod
Grow Surface
Master gardener Kit –
Refer to Guide for detailed
planting instructions.
™
Bio-Domes
Nutrients
Seed Kit Tray
5
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Place Bio-Domes on Seed Pods
C
Place a Bio-Dome on
each Seed Pod.
Press Bio-Dome down
until its rim almost
touches Grow Surface.
Bio-Dome
note: do not remove Bio-Domes until
seeds have sprouted. neVer
reMoVe SEED POD LABELS.
Add Starting Nutrient Tablets and Record Planting Date
D
Record Planting Date
Record the date Gourmet Herb Seed Kit was planted on
front cover of the Tending & Harvesting Guide.
Record the date Master Gardener Seed Pods were planted
on a calendar or in a notebook.
For gourmet Herb Kit – Add 2 tablets from
“Starting Nutrients” bag directly into Bowl.
For Master gardener Kit – Add 2 tablets from
“Small” nutrient bag directly into Bowl.
See "Add Nutrient" (Feed garden - Basic Feeding) on page 11 of
this guide for additional feeding instructions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting Your Garden
3
Plug Cord into Electrical Outlet
A
Plug in
What will happen...
A green light next to “Germination” and
a white light on Control Panel will illuminate.
1
view Door
Deluxe Grow Bulbs will come on.
Look under Lamp Hood to check that all 3 bulbs are lit.
2
If not, check to see if:
• Deluxe Grow Bulbs are properly inserted in Lamp Hood
(page 2, step1D).
• Lamp Cord is plugged into Lamp Hood (page 3, step 1E).
• You are getting power through the electrical outlet.
When Pump starts* it may make a gurgling noise for a moment.
Lift View Door. You should see water dripping from the bottom of Seed
Pods into the Bowl.
3
If not, check to see if:
• Lamp Arm is fully inserted into Base (page 2, step 1B).
• Bowl is firmly seated in Base (page 3, step 1G).
*Pump may take up to twelve hours to start.
note: You will hear water flowing until plant roots have grown to surface level of
water (a few weeks). Keeping water level in Bowl up to “Fill To Here” will help
reduce the sound of dripping water.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Select Plant Type
B
Press the SELECT button until you reach the type of plants you are growing
(Tomatoes/Peppers, Salad Greens, etc.).
note: depending on the plant type selected, your
200
aerogarden Pro
pump will automatically
turn on and off at pre-programmed intervals.
Pump controls the flow of water through Seed
Pods to optimize plant growth.
Your Light Timer
C
Your Light Timer is Set To Start
1
2
Growing Your Plants...starting now!
IfYou Would Like to Change theTime
of Day Your Lights Will Go Off...
See “Personalize Your Light Timer” on page 9.
*
• Your lights will stay on for about 16 hours and will shut off for about 8 hours.
200
.*
• Your lights will come on every day at the time you plugged in your AeroGarden PRO
*except when using “24-Hour light” setting, which sets lights to be on for 24 hours.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalize Your Light Timer
(optional)
Your PRO200 has lights and a built-in timer that automatically provide plants with the optimal amount of “sunlight”
(about 16 hours) and “night” (about 8 hours), depending on the plant type you selected in the previous section.
*
As long as plants get this amount of light, it does not matter when lights are turned off. Many people find it conve-
nient to have lights go on in the morning and off at night to match their own wake and sleep schedule.
*the exceptions to this are Flower & Vegetable plants. they require a daily dark period in order to produce flowers. if your plants will receive any room
light during the day (natural or artificial), we recommend setting your aerogarden lights to be on during the day.
5 Simple Steps...
lights to go off (Off Time) and your built-in light
timer automatically sets the On Time...nothing
more for you to do.
In order to make this as simple as possible, you only
need to set the time you want your AeroGarden
do the following to set the time you want your lights to go off:
1
2
Decide what time you want the lights to go OFF.
AT THAT TIME check that lights are on. If they are off, quickly press “Lights” button and im-
mediately release. (Lights must be on in order to reset timer.)
With lights on, press and hold “Lights” button until white light next to the plant type you
selected starts blinking – about 5 seconds.
3
Release the button.
4
5
When blinking stops (about 9 seconds), the lights will go off and your lights are now set to
go off at this time every day.
You can reset your timer as often as you want.
Lights Button
Blinking Light (if you selected Salad Greens)
in case of power failure, your Pro200 has a backup system that stores light, nutrient & replace grow bulbs
timers as well as plant selection settings. When power is restored, your aerogarden will go back to the off-on
cycle you have set.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Personalize Your Light Timer
(continued)
200
AeroGarden PRO “24-Hour Light” Setting
The “24-Hour Light” setting allows you to override
the built-in light timer and keep lights on and pump
running 24 hours a day. You can also customize the
amount of light plants receive by manually turning
lights on and off using the “Lights” button, or setting
automatic on/off times, using a standard light timer.*
“24-Hour Light” Setting
• Press “Select” until you reach Strawberries setting.
• Press and hold “Select” until the white light next to
Strawberries starts blinking - about 5 seconds.
• Release the button.
• When blinking stops (about 5 seconds), the light next to
Strawberries will remain on and the green light next to
“Germination” will light up. Your AeroGarden PRO200
is now on the “24-Hour Light” setting. (The lights and
pump will remain on 24 hours a day.)
Use the “24-Hour Light” setting when growing plants
that thrive with continual light and moisture, such as
leafy greens and some herbs.
For the more experienced gardener, the “24-Hour
Light” setting provides added flexibility when plant-
ing a custom garden. You are no longer limited to the
pre-programmed light schedules associated with each
plant type (such as Tomatoes/Peppers, Salad Greens,
etc.).
• To exit “24-Hour Light” setting, simply push the “Select”
button.
* not included. if you use a light timer to turn the lights on and off,
the nutrient timer and pump will stop whenever the lights are oFF.
Both will start up again when the lights turn back on.
the nutrient timer does not record the time elapsed when
lights are off. to ensure that your plants are fed every 2 weeks, we
recommend keeping track of your feeding schedule on a calendar.
note: “24-Hour light” setting is not recommended for
Flower or Vegetable plants – they require a daily dark
period to produce flowers.
Germination
Select
once your aerogarden Pro200 is set on the “24-Hour light” setting, the lights and pump
will remain on 24 hours a day. to shorten the amount of time lights are on, quickly press and
release “lights” button, and lights will turn off. lights will automatically come back on within
12 hours – or, you can press and release “lights” button again, to turn lights back on.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Reminders About Your AeroGarden
AeroGarden PRO200 Control Panel
• Lights On/Off
• Water Low
Use to occasionally override built-in light timer. Once pushed, lights
will stay off/on until the next time built-in light timer is set to go on/
off. This will not affect the timing of your light cycle and occasional
When light blinks add
water up to “Fill To Here.”
use of this feature will not harm your plants.
• Adaptive Intelligence
• Add Nutrient
The green light tracks garden
growth from germination
(Feed garden - Basic Feeding)
• Replace Grow Bulbs*
When “Add Nutrient” and “Water
Low” lights start blinking (every
2 weeks), add 2 nutrient tablets*
and fill the Bowl with water up to
“Fill to Here.” Press and release
“Reset” button to restart nutrient
timer and turn off blinking lights.
When light blinks (after 6 months
of use), it is time to replace Deluxe
Grow Bulbs. Bulbs can be ordered
or from your retailer. After replac-
ing Deluxe Grow Bulbs, press
“Reset” button to restart grow bulb
timer and turn off flashing light.
note: if you store your aerogarden
Pro200 between uses, grow bulb
timer automatically stops when
Pro200 is unplugged.
through maturity. AeroGarden
PRO200 automatically adjusts
the amount of light and water
plants receive to provide op-
timal growing conditions for
every stage of a plant’s life.
note: the time of day your lights
turn off may change as your
garden matures.
*see tending & Harvesting guide for
plant-specific nutrient information.
*see complete replacement
instructions on next page.
• Remove Bio-domes
When plants appear through hole in
Seed Pod Labels, remove Bio-Domes
and discard or recycle.
note: never remove Seed Pod Labels.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Reminders About Your AeroGarden (continued)
aerogarden Pro200 lamp arm & Hood Features
Raise lamp Hood (lights)
As plants grow to 1-2” from lights, raise Lamp Arm one notch at a time (each of the three Lamp Arm sections has
three notches). Be sure Lamp Arm is set at the lowest setting when you start your AeroGarden PRO200
.
Unplug AeroGarden PRO200 and remove Bowl
from Base.
1
2
3
Replace Bowl on Base and plug in
AeroGarden PRO200
.
Raise Lamp Arm/Lamp Hood:
• Hold Lamp Arm where it connects to Lamp Hood with
one hand. With other hand, push in Locking Lever.
• Release Locking Lever while pulling up on Lamp Arm.
• Locking Lever will automatically click into next
notch in the Lamp Arm section.
Push locking
lever in
Push locking
lever in
Push locking
lever in
Push locking
lever in
replace grow Bulbs – order bulbs at www.aerogardensupport.com
When “Replace Grow Bulbs” light on Control Panel begins blinking
after 6 months of use…
• Unplug AeroGarden PRO200
.
• Remove old Grow Bulbs and carefully discard*.
iMPortant: To avoid burning, be sure Grow Bulbs are cool before handling.
• Insert new Grow Bulbs into Lamp Hood.
• Plug in AeroGarden PRO200 and press and release “Reset” button to
restart grow bulb timer.
Early grow Bulb Replacement
If you replace Grow Bulbs before “Replace Grow Bulbs” light illuminates, be
sure to restart grow bulb timer as follows:
• Press and hold “Lights” button until white light next to your selected plant
type starts blinking – about 5 seconds.
• Release “Lights” button. The plant type selected light will continue to blink
for about 9 seconds. While plant light is still blinking…
*Check with local recycling authorities for light
bulb recycling availability in your area.
• Quickly press and release “Reset” button. “Replace Grow Bulbs” light will
blink once and the plant selected light will stop blinking.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Reminders About Your AeroGarden (continued)
(optional) trellis system
About the trellis system (not included)
Your AeroGarden PRO200 has the option of connecting a Trellis System to it’s Lamp Hood. The Trellis System
allows you to easily support heavy, fruit-filled branches on full-size plants such as tomatoes, peppers and cucumbers.
If you are interested in purchasing an AeroGarden Trellis System, you may do so at www.aerogardensupport.com or
from your retailer.
trellis system installation
200
If your PRO
is already assembled, you will need to remove the lamp Hood from lamp arm, and remove grow
Bulbs from the lamp Hood before starting. it is best to do this when the lights are off.
1
2
3
Unplug AeroGarden PRO200 and carefully remove Lamp Hood from Lamp Arm.
Turn Lamp Hood over and remove Grow Bulbs. (Be sure bulbs are cool before handling.)
Attach trellis Brackets to lamp Hood
Hand tighten pre-mounted screws
with phillips head
screwdriver. Do not over-tighten.
4
5
Insert Grow Bulbs into Lamp Hood.
Replace Lamp Hood on Lamp Arm and plug in AeroGarden PRO200
.
Use trellis system
3
Wrap Strap around branch that
needs support and snap closed.
1
Clip Trellis Coil on Bracket.
2
Pull down Trellis Coil.
lamp Hood
Bracket
trellis Coil
as a safety precaution, unplug aerogarden furnishing
before performing this task. Be sure Grow Bulbs are cool
to the touch before attaching or adjusting Trellis Coil.
4
Gently push up on supported branch
until it is at desired height.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare For Your Next Garden
Cleaning instructions for your aerogarden
Use only water and mild soap when cleaning your AeroGarden (except when Sanitizing - Step 7). Do not use
abrasive cleaners or run through the dishwasher.
When your garden has completed it’s growing cycle…
1
2
7
Sanitize AeroGarden.
• Fill Bowl ¾ full with water.
Unplug AeroGarden.
Grow
Carefully remove Bowl and
Grow Surface from Base and
bring to a sink. Set Base and
Lamp Hood aside.
NEVER SUBMERSE BASE AND
CONTROL PANEL IN WATER.
Surface
• Add ¼ cup (59ml) of chlorine
bleach.
• Replace Grow Surface on Bowl,
place Bowl on Base and plug in
AeroGarden for 1-2 minutes.
(Select Salad Greens on Control
Panel to be sure water is flowing.)
Remove Grow Surface from
Bowl and place on a counter
near a sink.
3
• Unplug AeroGarden and empty
Plant
Growth
bleach water from Bowl.
Seed
Pod
8
4
5
Rinse AeroGarden.
• Refill Bowl with tap water and
replace on Base.
• Plug in and run AeroGarden
for 1-2 minutes. (Select Salad
Greens again.)
• Unplug AeroGarden, empty Bowl
and repeat this step (step 8) one
more time.
Empty contents of Bowl in sink.
Remove Seed Pods and plants
from Grow Surface.
• Pull Seed Pods out of Grow
Surface openings.
• Throw away Seed Pods and
plant debris (plant growth and
roots). If you compost, plant
debris can be composted.
Roots
Pump
Stand
Pump
Filter
9
Towel dry the Bowl and Grow
Surface before putting them back
together and setting them back on
the Base.
6
Rinse and clean Grow Surface,
Pump Stand and Pump Filter.*
• Use a soft scrub brush to clean
tangled roots from underside of
Grow Surface and Pump Stand.
• Remove Pump Filter from
Pump Stand. Gently scrub
roots from Pump Filter.
10 If your Grow Bulbs have been in use
more than 6 months, they should be
replaced at this time (see page 12).
Your AeroGarden is now ready for
replanting.
• Place Pump Filter back into
Pump Stand.
After cleaning, there may still be a few
roots in your Grow Surface, Pump Stand
or Pump Filter. This will not affect the
operation of your AeroGarden.
* iMPortant note: We recommend replacing the Pump Filter after growing
two gardens. order Pump Filters from www.aerogardensupport.com or from
your retailer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare For Your Next Garden
(continued)
Replanting Your AeroGarden
If you have already grown a garden in your AeroGarden, please follow the instructions below to reset
the nutrient timer:
• Press and HOLD “Reset” button until red “Add Nutrient” light blinks (approximately 9 seconds).
• Release “Reset” button. “Add Nutrient” light will turn off.
• Your AeroGarden is now reset. (In some cases you may see other lights blink as well. This is nothing to worry about.)
Reset
Add Nutrient
Bundle cord when furnishing is not in use.
!
U.S. CAUTION
–
You are cautioned that any changes or modifications not expressly approved in this manual could void your
authority to operate this equipment.
note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar-
antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected; or, Consult the dealer or an experienced radio/TV technician for help.
to reduce the risk of electric shock, this furnishing has a
CAUTION: TO PREvENT ELECTRIC SHOCK, MATCH
polarized plug (one blade is wider than the other). this
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
plug will fit in a polarized outlet only one way. if the plug
does not fit fully in the outlet, reverse the plug. if it still
ATTENTION: POUR ÉvITER UN CHOC ÉLECTRIQUE,
does not fit, contact a qualified electrician to install the
proper outlet. do not change the plug in any way.
PRÉSENTER LA LAME LARGE À LA FENTE LARGE ET
POUSSER JUSQU’AU FOND
.
PRO200
© 2007-2008 AeroGrow International, Inc., Boulder, CO U.S.A. U.S. Patents Pending
5/8/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|