LASER BARCODE SCANNER
USER'S GUIDE
NUSCAN 3200 series
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. Limited Warranty ............................................................................. 1
2. Introduction .................................................................................... 2
3. Contents......................................................................................... 3
4. Barcode Symbologies ....................................................................... 3
5. Product Introduction ........................................................................ 4
6. Installation...................................................................................... 4
Connection ..................................................................................... 4
Test Scanning.................................................................................. 5
Maintenance ................................................................................... 5
7. Scanning Mode Selection .................................................................. 6
8. Beeper Mode Selection..................................................................... 7
9. Default Parameters .......................................................................... 8
10. Barcode Scan Field........................................................................... 9
11. Technical Specifications ...................................................................10
12. Programming Guide.........................................................................11
13. Trouble Shooting.............................................................................11
14. Product Support..............................................................................12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
This manual should only be used to make changes in the configuration of
the scanner for specific applications.
The NUSCAN 3200 Series scanners are ready to scan most kinds of barcodes. This
laser barcode scanner does not require software or drivers to operate. The scanner
enters data as keyboard data.
If you are unsure of the scanner configuration or have scanned the incorrect codes,
please scan the “Reset Configuration to Defaults” barcode. This will reset the scanner
to its factory settings.
1. Limited Warranty
No warranty of any kind is made in regard to this material, including, but not limited to,
implied warranties of merchantability or fitness for any particular purpose. We are not
liable for any errors contained herein or for incidental or consequential damages in
connection with furnishing, performance or use of this material. We shall be under no
liability in respect of any defect arising from fair wear and tear, willful damage,
negligence, abnormal working conditions, failure to follow the instructions and
warnings, or misuse or alteration or repair of the products without written approval.
No part of this document may be reproduced, transmitted, stored in a retrieval system,
transcribed, or translated into any human or computer or other language in any form
or by any means electronic, mechanical, magnetic, optical, chemical, biological,
manual or otherwise, except for brief passages which may be quoted for purposes of
scholastic or literary review, without express written consent and authorization.
General handling precaution
DO NOT DISPOSE IN FIRE.
DO NOT USE OR STORE SCANNER IN HUMID AREAS
DO NOT DROP THE SCANNER
DO NOT TAKE APART WITHOUT PROPER AUTHORIZATION
Download from Www.Somanuals.co1m. All Manuals Search And Download.
2. Introduction
The NUSCAN 3200 Laser Barcode Scanner combines the best scanning performance
and value. NUSCAN 3200 comes in multiple modes to handle any task. Its flexible
architecture gives users different configurations to choose from, with different
combinations of communications.
With its rugged high class ID design and ergonomic styling, NUSCAN 3200 offers
superior service life and reduces user fatigue. In addition to 80 scans per second
performance, it is equipped with RIOTEC Laser Engine which is no moving parts inside,
soft fixed laser light, high reliability, linear receiver, and long scanner lifetime.
Moreover, NUSCAN 3200 window covered with rubber that fully protects product and
increases shock resistance.
Boasting several compatible interfaces (USB, K/B and RS-232) and numerous
configurations, the scanner is a powerful and reliable handheld scanner without
compromise.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Contents
The NUSCAN 3200 Long Range Laser Barcode Scanner package should contain:
NUSCAN 3200 Long Range
User’s Guide
Laser Barcode Scanner
4. Barcode Symbologies
Barcodes are symbols consisting of a series of bars and spaces which can be applied
to packages, cartons, bottles and other commercial products. The bars and spaces in
each symbol are grouped in such a way to represent a specific ASCII character or
function. The interpretation of these groups is based on a particular set of rules called
Symbologies. Various symbologies have been developed for particular applications.
Some examples are shipping and receiving, manufacturing, retail, healthcare,
transportation, document processing and tracking, and libraries.
NUSCAN 3200 Series Scanners can read most of the popular barcode symbologies
including Code 39, Code 93, Code 128, Code11, Interleaved 2 of 5, UPC-A, UPC-E,
EAN/JAN-8, EAN/JAN-13, Codabar, UPC/EAN/JAN, MSI,……
3
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Product Introduction
Buzzer
Exit Window
Handle
Trigger
When a barcode is successfully decoded, the blue LED light of the scanner will turn on
and off and the scanner will beep once. If the barcode is not successfully read, the
LED will show red and the buzzer will not sound.
6. Installation
Insert the plug on the free end of the Communications Cable into the appropriate
connector on the host as below described:
a. USB Connection
Host
b. K/B Connection
4
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Serial Port (RS-232) Connection
NOTE: For Serial port (RS-232), please plug the power connector of 5V power adapter
to RS232 cable.
1
Be sure that Host computer is turned off.
Ensure that all connections are secure.
Turn on your Host.
Aim the scanner at a barcode. Ensure that the scanner is in trigger mode
(default), and press the trigger.
1.
2.
3.
4.
On successful decode, the blue LED light will turn on and off and the scanner will
beep once.
Tip
Do not hold the scanner directly over a barcode at 90˚. Scanning light bounces
directly back into the scanner from the barcode label is known as specular reflection
which will create a "dead zone" where decoding is difficult. Practice a few times to find
what range of angles works best.
Maintenance
Cleaning the scan window is the only maintenance required. A dirty window may
affect scanning accuracy.
Wipe the scanner window gently with a lens tissue or other material suitable for
cleaning optical material.
Do not spray water or other cleaning liquids directly onto the window.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Scanning Mode Selection
Trigger Mode (Default)
The scanner becomes inactive as soon as the data is
transmitted. It must be triggered to become active again.
Continuous Mode
When set this code, laser light is always ON. Can read
barcode continuously after code transmission.
Pulse Mode
When set this code, laser light will flash when standby. Can
read barcode continuously after code transmission.
Reset Mode
The reading of the "RESET” label turns all the parameters
back to default values.
Download from Www.Somanuals.co6m. All Manuals Search And Download.
8. Beeper Mode Selection
(Deafult)
Reset Mode
The reading of the "Reset Configuration to Defaults”
label turns all the parameters back to default values.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Default Parameters
These tables give the default settings of all the programmable parameters.
DEFAULT VALUES OF OPERATING PARAMETERS
Function
Scanning Mode Selection
Message/Block mode selection
Good read beeper tone selection
Default Values
Trigger mode
Message
On
DEFAULT VALUES OF K/B PARAMETERS SETTING
Function
Keyboard type selection
Message terminator
Default Values
IBM PC/AT USA
Enter/ carriage
Return
DEFAULT VALUES OF RS-232 (SERIAL) COMMUNICATION PARAMETERS
Function
Handshaking protocol
Baud rate
Default Values
None
9600
8
Data bit
Stop bit
1
Parity
None
CR
Message terminator selection
DEFAULT VALUES OF USB COMMUNICATION PARAMETERS
Function
Keyboard Type
Message terminator
Default Values
US Keyboard
Enter
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10.Barcode Scan Field
Depth of Field (Up to 42 cm): Based on Symbol’s Standard Code 39 PCS=0.9
lable and 600 lux environment and there are +/- 1 cm tolerance
9
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Technical Specifications
OPERATIONAL
Light Source
650nm Laser Diode
Linear CCD
Optical System
Scan Speed
80 scans per second
4 mil
Minimum Bar Width
Print Contrast
Reading Indicators (LED)
Beeper Operation
System Interfaces
PHYSICAL
45% or more @ UPC/EAN 100%
Two-color LED (blue and red)
ON/OFF
USB, K/B or RS-232
Height
7.16 Inches (182 mm)
3.66 Inches (93 mm)
2.40 Inches (61 mm)
Depth
Width
Weight
0.28 LBS
6 ft (2m)
(130g +/- 5g) (No cable)
Cable
POWER
Input Voltage
Power
5 VDC +/- 0.5 V
20mA @ 5V (standby current)
60 mA @ 5V
Operating Current
Regulation
FCC Class A & CE
ENVIRONMENTAL
Temperature-Operating
Temperature-Storage
Humidity-Operation
0˚C ~ 50˚C (32˚F ~ 122˚F)
-20˚C ~ 60˚C (-4˚F ~ 140˚F)
10% ~ 85% ( non-condensing)
Humidity-Storage
Light Levels
Shock
5% ~ 95% ( non-condensing)
Up to 36,000 Lux
1.5m drop onto concrete
10
Download from Www.Somanuals.com. All Manuals Search And Download.
12.Programming Guide
If you need to make changes in the configuration of the scanner for specific
applications, a full Programming Guide can be downloaded at:
13.Trouble Shooting
a. Problem: Nothing happens when you follow the operating instructions.
Possible Cause
Possible Solution
Interface cables are Check for loose cable connections.
loose.
b. Problem: Light comes on, but symbol does not decode.
Possible Cause
Possible Solution
Scanner is not
programmed for the
correct bar-code
type.
Please refer User’s Guide and be sure to select the
correct interface selection and ensure that the
scanner is programmed to read the type of barcode
you are scanning.
Barcode symbol is
unreadable.
Check the symbol to make sure it is not de-faced. Try
scanning test symbols of the same barcode type.
Distance between
scanner and barcode
is incorrect.
Move the scanner closer to or further from the
barcode.
c. Problem: Symbol is decoded, but not transmitted to the host.
Possible Cause
Possible Solution
Scanner is not
programmed for the
correct host type.
Please make sure the scanner is configured to the
appropriate host type by scanning the corresponding
programming barcode on the User’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
d. Problem: Scanned data is incorrectly displayed on the host.
Possible Cause
Possible Solution
Scanner is not
Be sure proper host type is selected.
programmed to work
with the host.
For RS-232, ensure the scanner’s communication
parameters match the host’s settings.
For keyboard emulation configuration, ensure the
system is programmed for the correct keyboard type,
and that the CAPS LOCK key is off.
Be sure editing options (e.g. UPC-E to UPC-A
Conversion) are properly programmed.
14.Product Support
Website Support:
We have listed most of our FAQ (Frequency Asked Questions) at
If it does not help you to resolve your product issues, you may also contact Adesso
Technical Support by email or telephone support during 9:00AM to 6:00PM PST from
Monday through Friday.
Email Support:
•
•
•
•
•
Your Name & Contact email address & telephone number
Model number & Serial number of your Adesso product
Operating System
Description of how you installed and set up your Adesso product
Description of your technical difficulty
Phone Support:
(800) 467-1195
Before you call us for Tech-Support, please provide below information:
•
•
•
•
•
Your Name & Contact telephone number
Model number & Serial number of your Adesso product
Operating System
Description of how you installed and set up your Adesso product
Description of your technical difficulty
Download from Www.Somanuals.com. All Manuals Search And Download.
|