Adesso Photo Scanner EZSCAN 1000 User Manual

With the Adesso Film Scanner quickly and easily convert old filmstrips and slides to  
digital images for instant sharing or digital storage. This film scanner conveniently  
connects to your computer via USB connection and is USB bus powered, meaning no  
additional power supply cable is needed, the same USB connection to your computer  
powers the digital film scanner. The Adesso Film Scanner is extremely user-friendly,  
just press the one-touch button and film photographs are instantly scanned and on  
your computer screen in high quality 1800 DPI images. The Adesso Film Scanner is  
also lightweight and portable so you can use anywhere. Sharing your film photo-  
graphs digitally is only a click away, start enjoying with family and friends today!  
CONTENTS  
EZScan 1000 Film Scanner  
SPECIFICATIONS  
Scanning Type: Image Capture CMOS  
Optical Resolution: 1800 DPI  
Software Interpolation: 3600 DPI x 3600 DPI (5-Megapixels)  
Color Depth: 24 bit/pixel  
A
B
C
(1) Adesso EZScan 1000  
Film Scanner  
(1) Filmstrip Holder  
(1) Slide Holder  
Preview/ Scan Speed: Approx 8 sec (600 DPI)  
Action Button: Transparent & Negative Scan  
Scan Method: Single Pass  
Protocols: TWAIN Compliant  
Interface: USB 2.0 Only  
Processor: PC: IBM Compatible PC with Pentium III or higher  
Mac: PPC G4, PPC G5 Intel  
Memory: 512 MB RAM and 500 MB Free HDD Space  
Operating System: Windows® 7, Windows® Vista, Windows® XP & Windows® 2000  
Mac® 10.4, 10.5 & 10.6  
D
E
F
Mini USB Cable  
Quick Start Guide  
Software CD  
Connectivity Interface: USB 2.0 Port  
Others: High Color Graphic Card (VGA or higher)  
4
1
2
3
CD-ROM Drive (for Software Installation)  
Using Mounted Slide Holder  
Scanner User Interface  
6. Click “Install this driver and software anyway” (Windows 7 or Vista) or  
®
Continue Anyway” (Windows XP or 2000) when Windows message is  
displayed during the installation process.  
To scan 35mm mounted slides (max 4 slides):  
Attention  
Insert mounted slides into slots with emulsion (non-glossy) side down.  
There are arrows and illustrations on the frame of each slot. Please  
follow illustrations to insert mounted slides.  
Before performing the driver/software installation ensure your  
scanner is NOT CONNECTED to your computer.  
Transparency Scan Button  
7. Next a window will be displayed asking you to connect scanner. Plug the  
smaller end of the included mini USB cable to the back of the scanner and  
plug the bigger end of the USB cable to the USB port on your computer.  
Dust Cover Slot  
LED Indicator  
Negative Scan Button  
1. Insert the Software CD into your CD-ROM drive.  
1. LED Indicator: Indicates the scanner status.  
Using Filmstrip Holder  
On: The scanner is connected with the computer and ready for  
film scanning.  
Off: The scanner is off, either because scanner is disconnected  
from computer or because the computer is turned off.  
To scan 35mm filmstrips (max 6 frames):  
Open filmstrip holder and place filmstrip in the film holder with emulsion,  
(non-glossy) side down. Then snap the film holder cover closed.  
Note: If the Installation Wizard does not start or display automatically,  
please double click “install.exe” from the root of CD-ROM.  
2. When the Installation Wizard window is displayed click on “Install  
the Software” button.  
2. Transparency or Negative Scan Button: A simple touch on the  
scanner Transparency or Negative Scan Buttons enables you to  
conveniently scan the slide or filmstrip on holder, and automatically  
save the digital image file on your computer.  
8. When your computer recognizes scanner, return to the orignal window  
that asked you to connect scanner and click “OK”.  
3. Next, click on the “Install” button to start the installation.  
4. Then click on the “Next” button in the window that appears.  
9. Click “Finish” to complete the driver installation.  
3. Dust Cover Slot: Insert the film holder into the scanner through dust  
cover slot. The film holder can be inserted from either side. The film  
holder will index at each frame using the notches on its side rails.  
10. Restart your computer after the installation is completed.  
5. If there is a message asking you to install device software, click the  
Install” button.  
8
5
6
7
Insert Film Holder into Scanner  
Converting Film to Digital Files  
FotoLite Setting (Optional)  
Attention  
Before scanning read instructions below for best results.  
1. Press either Transparency or Negative scan button on the EZScan  
1000 and the FotoLite screen will be displayed as seen below.  
1. Double click on the FotoLite icon located on the Windows system tray  
Insert the film holder into the scanner through dust cover slots. The film  
holder can be inserted from either side. The film holder will index at each  
frame using the notches on its side rails.  
or right click the FotoLite icon  
and select “Properties”.  
• Always turn the film emulsion (non-glossy) side facing towards the front  
of scanner and glossy side facing the back of the scanner (where USB  
cord is located).  
®
Note: FotoLite software must be active and showing in Windows tray so  
buttons will launch scanning software (to open software please see  
page 11).  
Note: If the FotoLite icon is not in your Windows system tray, go to your  
computer’s START menu, then Programs, find EZScan 1000  
folder and select FotoLite software.  
On slide/filmstrip holder edge you can see ‘Mounted Slide Holder’ or  
‘Filmstrip Holder’ text, always keep this side facing towards the back of the  
scanner (where USB cord located).  
Attention  
2. The FotoLite Setting window  
will appear. You can apply  
customized settings of your  
choice or leave default.  
1. To ensure film is scanned properly, verify that your slide/film holder is  
inserted correctly (see page 9).  
2. The film holder should be inserted into the scanner smoothly. Do not push  
the film holder hard or use extreme force, this will damage scanner.  
3. Click “Done” when complete  
or “Default” to return settings  
to original default settings.  
scan  
preview  
3. When film holder is inserted into scanner it will stop at index positions,  
before preforming scan gently push and pull the film holder to make sure  
the film holder has correctly landed in an index position.  
• On slide/filmstrip holder edge there is a small label with slide/filmstrip  
holder inserting instructions, this label should always face towards  
front of scanner.  
2. Click “Preview” icon to see image on screen, then once selection area  
is set click “Scan” icon. The scanned image(s) will be saved in the  
Destination Folder” selected under “Preference Settings” of FotoLite.  
11  
12  
9
10  
Label  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Speaker NCG PLM User Manual
3Com Weather Radio WL 548A User Manual
Abocom Network Card CA1040 User Manual
Actiontec electronic Network Card 802UI3 User Manual
Adcom Car Amplifier GFA 5225 User Manual
ADTRAN Network Router 1200263L1 12A User Manual
Alamo Lawn Mower A84B User Manual
Altec Lansing Speaker iM310 User Manual
Amana Refrigerator AWCE50ARS User Manual
Beko CRT Television 32WLU530HID User Manual