Overview
Fan
Drive activity LED
pin connections
Standard height
mounting bracket
Addonics
Multilane 4x SATA
interface
T E C H N O L O G I E S
PCI-Express 8x
Multilane 4X RAID5/JBOD PCI-E 8x Controller
ADSA3GPX8-ML
To switch between RAID and non-RAID mode
The controller card comes with jumper pins that would allow you to switch
between RAID and non-RAID mode. The RAID mode means you can create
RAID volumes using the SATARAID5 array manager. The non-RAID mode
means you can only configure individual drives.
The RAID mode uses the SATARAID5 array manager and the raid driver version.
The non-RAID mode uses the base driver.
Detailed View of J4
User’s Guide
J4
Enable / Disable BIOS
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Locate the downloaded driver and extract the contents. Double click on the
extracted installer to begin the installation process.
4. Continue through the installation process, entering in your desired settings.
6. The Silicon Image SATARaid5 Manager has been installed at the same time
as the controller driver.
When the installation process is finished, the RAID controller driver and RAID
software have been installed.
A. The new folder containing the SATARaid5 Manager can be accessed from
Applications -> Utilities -> Silicon Image.
5. Return to Applications -> Utilities -> System Profiler and check the "PCI
Cards" list to see if the controller drivers have been correctly installed.
A correctly installed PCI-Express RAID controller will display as:
pci1095,7124 for RAID controllers based on the SiI3124 chipset with RAID
firmware
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
B. Within this folder, click on "SATARaid5Manager" to execute the RAID creation
and management utility.
If you need assistance to get your unit functioning properly, please call Addonics
Technical Support. Our technical staff will be happy to assist you, but they will
need your help to do so. Calling the technical support staff without all the proper
information can be both time consuming and frustrating. Here are some tips to
help you out:
Contact Information
Phone:
Fax:
408-573-8580
408-573-8588
Email:
Internet:
TECHNICAL SUPPORT
Phone:
Hours:
Email:
408-453-6212
8:30 am - 6:00 pm PST
C. For detailed instructions on creating and managing RAID volumes, read the
SATARaid5 Manager User Manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
|