Adaptec Ultra WirelessTM
Access Point
User’s Guide
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Technical Support
If you have questions about installing or using your Adaptec product, check this document
first—you will find answers to most of your questions here. If you need further assistance, use
the support options listed below.
Technical Support Identification (TSID) Number
■
Before contacting Technical Support, you need your unique 12-digit TSID number. The TSID
number identifies your product and support status.
■
The TSID number is included on two white, bar-coded labels, like the example below.
Support Options
■
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles,
troubleshooting tips, and frequently asked questions for your product.
For support via Email, submit your question to Adaptec's Technical Support Specialists at
ask.adaptec.com.
To order Adaptec products, including accessories and cables, call +1 408-957-7274. Or, you
Europe
■
■
German and English: Search the Adaptec Support Knowledgebase (ASK) at
ask-de.adaptec.com for articles, troubleshooting tips, and frequently asked questions for
your product.
For support via e-mail, submit your question to Adaptec's Technical Support Specialists at
ask-de.adaptec.com.
■
■
French: Search the Adaptec Support Knowledgebase (ASK) at ask-fr.adaptec.com for articles,
troubleshooting tips, and frequently asked questions for your product.
For support via e-mail, submit your question to Adaptec's Technical Support Specialists at
ask-fr.adaptec.com.
To order Adaptec products, including accessories and cables,
Australia and New Zealand
■
■
For support via e-mail, submit your question to Adaptec's Technical Support Specialists at
ask.adaptec.com.
Hong Kong and China
■
■
Fax Technical Support at +852 2869 7100.
Singapore
■
Japan
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.co.jp
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 2-Year Hardware Warranty
1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from
defects in material and workmanship for a period of two (2) years from the date of purchase.
If the product should become defective within the warranty period, Adaptec, at its option,
will repair or replace the product, or refund the purchaser’s purchase price for the product,
provided it is delivered at the purchaser’s expense to an authorized Adaptec service facility
or to Adaptec.
2. Repair or replacement parts or products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced parts or products shall become the property of
Adaptec. This warranty shall not apply if the product has been damaged by accident,
misuse, abuse or as a result of unauthorized service or parts.
3. Warranty service is available to the purchaser by delivering the product during the warranty
period to an authorized Adaptec service facility or to Adaptec and providing proof of
purchase price and date. The purchaser shall bear all shipping, packing and insurance costs
and all other costs, excluding labor and parts, necessary to effectuate repair, replacement or
refund under this warranty.
4. For more information on how to obtain warranty service, write or telephone Adaptec at 691
South Milpitas Boulevard, Milpitas, CA 95035, (800) 959-7274.
5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS
BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF
UNAUTHORIZED SERVICE OR PARTS.
6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHICH NOW
OR HEREAFTER MIGHT OTHERWISE ARISE RESPECT TO THIS PRODUCT. IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A) HAVE NO GREATER
DURATION THAN 2 YEARS FROM THE DATE OF PURCHASE, (B) TERMINATE
AUTOMATICALLY AT THE EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT
PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS PRODUCT BECOMES
DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE
REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION
LOSS OF DATA, ARISING FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ARE NOT THE RESPONSIBILITY OF ADAPTEC AND, TO THE EXTENT PERMITTED BY
LAW, ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE
EXTENT NOT UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.
7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU.
8. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Software License Agreement
PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE
LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY
BE BUNDLED WITH THIS PRODUCT.
BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE
LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH
DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE
TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED
PRODUCT FOR A FULL REFUND.
In return for acquiring a license to use the Adaptec software (“Software”) and the related
documentation, you agree to the following terms and conditions:
1. License. This Agreement grants you, the Licensee, a license to:
a. Use the Software on a single computer system or on multiple workstations, systems and
servers which incorporate an Adaptec RAID controller and may be accessed by multiple
users from multiple locations. You may make as many installations of the Software as
needed, but must restrict such installation only to systems, workstations or servers
using an Adaptec RAID controller.
b. Make one copy of the Software in machine readable form solely for back-up purposes
provided you reproduce Adaptec’s copyright notice and any proprietary legends.
2. Restrictions. You may not distribute copies of the Software to others. You may not post or
otherwise make available the Software, or any portion thereof, in any form, on the Internet.
You may not use the Software in a computer service business, including in time sharing
applications. The Software contains trade secrets and, in order to protect them, you may not
decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-
perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,
RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS
BASED UPON THE SOFTWARE OR ANY PART THEREOF.
3. Ownership of Software. As Licensee, you own the media upon which the software is
recorded or fixed, but Adaptec and its licensors retain title and ownership of the Software
recorded on the original media and all subsequent copies of the Software, regardless of the
form or media in which or on which the original and other copies may exist. This license is
not a sale of the Software or any copy.
4. Confidentiality. You agree to maintain the Software in confidence and that you will not
disclose the Software to any third party without the express written consent of Adaptec. You
further agree to take all reasonable precautions to preclude access of unauthorized persons
to the Software.
5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may
terminate the license at any time by destroying the Software (including the related
documentation) together with all copies or modifications in any form. Adaptec will have the
right to terminate our license immediately if you fail to comply with any term or condition
of this Agreement. Upon any termination, including termination by you, you must destroy
the Software (including the related documentation), together with all copies or
modifications in any form.
6. Special Terms Applicable to Databases. Where a database is included with the Software, you
acknowledge that it is licensed only in connection with the use of the Software to perform
disc creation, and that the database and all data derived therefrom must be maintained in
confidence in accordance with the provisions of Section 4. This license does not grant you
any rights to distribute or disclose such database or data.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the
Software is furnished will be free from defects in material or workmanship under normal
use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC
AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR
RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE
FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS
LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE
FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE NO
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO
NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied
warranties or limitations on how long an implied warranty may last, so the above
limitations may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of
this warranty, shall be:
a. The replacement of any media not meeting the above limited warranty which is
returned to Adaptec; or:
b. If Adaptec or its distributor is unable to deliver replacement media which is free from
defects in materials or workmanship, you may terminate this Agreement by returning
the Software and your money will be refunded.
9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO
YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,
INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF
ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the
exclusion or limitation of special, incidental, or consequential damages, so the above
limitation or exclusion may not apply to you.
10. Export. You acknowledge that the laws and regulations of the United States and other
countries may restrict the export and re-export of the Software. You agree that you will not
export or re-export the Software or documentation in any form in violation of applicable
United States and foreign law.
11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the
Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is
subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is
acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure
by the Government is subject to the restrictions of this Agreement in accordance with 48
C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and
49 C.F.R. 227.7202-1 of the DoD FAR Supplement and its successors.
12. General. You acknowledge that you have read this Agreement, understand it, and that by
using the Software you agree to be bound by its terms and conditions. You further agree that
it is the complete and exclusive statement of the agreement between Adaptec and you, and
supersedes any proposal or prior agreement, oral or written, and any other communication
between Adaptec and you relating to the subject matter of this Agreement. No additional or
any different terms will be enforceable against Adaptec unless Adaptec gives its express
consent, including an express waiver of the terms of this Agreement, in writing signed by an
officer of Adaptec. You assume full responsibility for the use of the Software and agree to
use the Software legally and responsibly. This Agreement shall be governed by California
law, except as to copyright matters, which are covered by Federal law. This Agreement is
deemed entered into at Milpitas, California by both parties. Should any provision of this
Agreement be declared unenforceable in any jurisdiction, then such provision shall be
deemed severable from this Agreement and shall not affect the remainder hereof. All rights
in the Software not specifically granted in this Agreement are reserved by Adaptec.
Should you have any questions concerning this Agreement, you may contact Adaptec by
writing to:
Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
■
Consult the dealer or an experienced radio/television technician for help.
You are cautioned that changes or modifications not expressly approved by the part responsible
for compliance could void your authority to operate the equipment.
Adaptec, Inc.
AWN-8060
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
In this Guide
Introduction
Installation Task List
Installing the Wireless Access Point Utility
Opening the Utility and Logging on
Connecting to the WLAN
19
20
28
30
32
33
Using the Wireless Access Point Utility
Changing the Set-up of Your WLAN
Troubleshooting
About Wireless Technology and LANs
Technical Specifications
Glossary
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
This User’s Guide provides detailed instructions for installing and
configuring your Wireless Access Point (Wireless AP) as part of a
Wireless Local Area Network (WLAN). See the Installation Task List
on page 3 for an overview of the installation process.
This Guide also includes a basic overview of wireless and LAN
technology (see page 30) suitable for novice users. It assumes you
have a working knowledge of your computer and are familiar with
the Windows operating system.
Note: Your Wireless AP is only one element of your WLAN.
Installing this product alone will not create a wireless network.
See About Wireless Technology and LANs on page 30 for
information on the minimum requirements for creating a WLAN.
Kit Contents
Your Adaptec Ultra Wireless Access Point kit includes:
■
■
■
■
Adaptec Ultra Wireless Access Point (AWN-8060)
Ethernet straight-through cable
AC Power adapter
Ultra Wireless Access Point CD, which contains documentation
and the Adaptec Wireless Access Point Utility
■
Adaptec Ultra Wireless Access Point Quick Start Guide
System Requirements
To use your Wireless AP, you need a PC-compatible computer with:
■
■
Pentium-class 90MHz (or faster) processor
®
®
®
Microsoft Windows 98SE, Windows Me , Windows 2000 , or
®
Windows XP
■
CD-ROM drive
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Task List
Installation Task List
To successfully install your Wireless AP, complete these tasks:
■ Follow the tips and suggestions provided in the next section,
Before You Begin.
■ Install the Wireless AP. See page 6.
■ Install the Wireless Access Point Utility. See page 8.
■ Set the IP address for your Wireless AP. See page 12.
■ Connect to the WLAN. See page 14.
Before You Begin
Review the features of your Wireless AP in This is Your Wireless
Access Point on page 4.
If you are unfamiliar with wireless technology or Local Area
Networks (LANs), read About Wireless Technology and LANs on
page 30 for a basic overview.
If you have any non-Adaptec brand Wireless products on your
WLAN, or if you have changed the default settings of your other
Adaptec Wireless products, you’ll find it easier to complete the
Installation Checklist if you have this information available before
you begin:
■
■
■
■
Wireless Network ID (or SSID)
Encryption settings
Security authentication settings
Preamble type
Caution: Install your Wireless AP as far away as possible from
potential sources of interference, such as microwave ovens,
2.4 GHz wireless telephones, baby monitors, and so on.
!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Task List
This is Your Wireless Access Point
Top View
The top of your Wireless AP has four clearly labeled status
indicator lights (or LEDs). Once your Wireless AP is installed, these
LEDs display the status of the network and the condition of your
Wireless AP, as described:
LED
On
Off
Blinking
DIAG
Updating
firmware.
LAN
LAN connection Problem with
Data is being
is made.
LAN connection. transmitted on
LAN.
Wireless
Power
Ready to receive
Wireless
Problem with
WLAN.
Data is being
transmitted on
WLAN.
connections.
Device is on.
Device is off.
-
4
Installation Task List
Side View
Side View
DC-IN port
LAN port
INIT button
The DC-IN port connects your Wireless AP to a power source.
The LAN port connects your Wireless AP to your LAN.
The INIT button reboots your Wireless AP and resets it to its
factory default settings. (Press and hold the INIT button for 5
seconds to reset.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Your Wireless AP
Installing Your Wireless AP
Before continuing, ensure that you have followed the tips and
suggestions provided in Before You Begin on page 3.
The next task on the Installation Task List (see page 3) is to install
your Wireless AP. This section helps you locate it in the best
possible position and guides you through the installation process.
Locating Your Wireless AP
For maximum performance, install your Wireless AP in the center
of your network, in a place that has a line of sight to all the devices
connecting to it. Keep it as far away as possible from potential
sources of interference, such as microwave ovens, 2.4 GHz wireless
telephones, baby monitors and other wireless devices.
Note: The higher you place your Wireless AP, the better the
signal coverage will be, especially if you have WLAN stations
upstairs from your Wireless AP.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Your Wireless AP
Installing the Wireless AP
Your Wireless AP can fit into your WLAN in multiple ways. It can
be connected to a hub or switch on your network, a router on your
network, or a network adapter that’s installed in a computer on
your network.
To install the Wireless AP:
1
Use the mounting screws to secure the Access Point in place, if
desired.
2
Connect the Ethernet cable to the LAN port on the Access Point.
Step 2:
Connect LAN.
Step 4:
Connect power.
3
Depending on your network configuration, connect the other
end of the Ethernet cable to the LAN port on:
■
■
■
a hub or switch on your network.
a router on your network.
network.
4
5
Connect the power adapter to the DC-IN port on the Access
Point (as shown in Step 2 on page 7), and plug it into a power
outlet.
Raise the Access Point’s antennas.
Your Wireless AP is installed. See Installing the Wireless Access Point
Utility on page 8 to continue with your next Installation task.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wireless Access Point Utility
Installing the Wireless
Access Point Utility
Before you continue, make sure that you have:
■ Followed the tips and suggestions provided in Before You Begin
on page 3.
■ Installed the Wireless AP. See page 6.
The next step on the Installation Task List (see page 3) is to install
the Adaptec Wireless Access Point Utility, a tool that helps you set
up and monitor your Wireless AP.
To install the Wireless Access Point Utility:
1
Insert the Ultra Wireless Access Point CD into your CD-ROM
drive.
Note: Adaptec recommends that you install the Wireless
Access Point Utility and manage your Wireless AP on a
computer that is wired to your Wireless AP through a
network hub, switch, or router.
2
3
4
In the Windows Start menu, click Run.
Click Browse, and browse to your CD-ROM drive.
Double-click setup.exe.
The InstallShield Wizard opens.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wireless Access Point Utility
5
Click Next.
6
Type in your User Name and Company Name (optional), then
click Next.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wireless Access Point Utility
7
The InstallShield Wizard chooses a default destination folder for
the software files. Click Next to accept the default destination
(recommended), or click Browse to select an alternate destination.
8
You can choose where to store program icons in the Program
Folder. Accept the default folder name, type a new folder name,
or select one from the Existing Folders list. Click Next.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wireless Access Point Utility
Click Finish to complete the installation.
9
The Wireless Access Point Utility is installed. The Wireless Access
Point Utility icon appears on your desktop. See Setting Your
Wireless AP’s IP Address on page 12 to continue.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Your Wireless AP’s IP Address
IP Address
Before you continue, make sure that you have:
■ Followed the tips and suggestions provided in Before You Begin
on page 3.
■ Installed the Wireless AP. See page 6.
■ Installed the Wireless Access Point Utility. See page 8.
The next step on the Installation Task List (see page 3) is to set the
IP address for your Wireless AP.
You must set the IP address for your Wireless AP if you have just
installed your Wireless AP, upgraded the firmware, or reset the
Wireless AP using its INIT button or the Reset button in the
Wireless Access Point Utility. You may also need to set the IP
address if you are having trouble connecting to the WLAN.
To set the IP address:
1
Double-click the Wireless Access Point Utility icon on
your desktop (shown at right), or open the program
using the Windows Start menu.
The Utility opens and begins to search for active Adaptec APs.
2
3
Select your Wireless AP, then click Admin and select Set IP
Address.
Click OK, then click Exit.
The IP address is set. See Opening the Utility and Logging on on
page 13 to continue.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening the Utility and Logging on
Logging on
Before you continue, make sure that you have:
■ Followed the tips and suggestions provided in Before You Begin
on page 3.
■ Installed the Wireless AP. See page 6.
■ Installed the Wireless Access Point Utility. See page 8.
■ Set the IP address for your Wireless AP. See page 12.
The next step on the Installation Task List (see page 3) is to log on
to the Wireless Access Point Utility.
To log on to your Wireless AP:
1
Double-click the Wireless Access Point Utility icon on your
desktop, or open the program using the Windows Start menu.
The Utility opens and begins to search for active Adaptec Access
Points.
connecting your station to the same wired network as your
Wireless AP.
2
3
4
Double-click the Wireless AP.
By default, no password is set. (See Changing the Administration
Password on page 26 for instructions on setting or changing the
Password.) However, if you set a password during a previous
session, enter it now.
5
Click OK.
You are logged on to the Utility. See Connecting to the WLAN on
page 14 to continue.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the WLAN
Connecting to the WLAN
Before you continue, make sure that you have:
■ Followed the tips and suggestions provided in Before You Begin
on page 3.
■ Installed the Wireless AP. See page 6.
■ Installed the Wireless Access Point Utility. See page 8.
■ Set the IP address for your Wireless AP. See page 12.
■ Opened and logged on to the Utility. See page 13.
your Wireless AP to your WLAN. Follow the instructions for your
specific WLAN set-up:
■
If you are setting up a new WLAN using only Adaptec Wireless
products, see Using Only Adaptec Wireless Products below.
■
If you are adding your Wireless AP to an existing WLAN or
creating a new WLAN using non-Adaptec brand Wireless
products, see page 15.
Using Only Adaptec Wireless Products
You have completed the Installation Task List. (Adaptec Wireless
products are preset to work together on a WLAN.)
See Checking Your Wireless Connections on page 18 for more
information on using your Wireless AP.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the WLAN
Adding to an Existing WLAN or Using Your
Wireless AP With Non-Adaptec Brand Wireless
Devices
You must adjust the default settings on your Wireless AP to allow it
to function properly within your WLAN. These specific settings
must be identical with those of every other Wireless device on your
WLAN:
■
■
■
Wireless Network ID (SSID)
Encryption Settings
Security Authentication
Note: If you are creating a new WLAN, configure your
Wireless AP first, then use identical settings on your Wireless
network devices. If you are adding your Wireless AP to an
existing WLAN, configure your Wireless AP to match the
other Wireless network devices.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the WLAN
To change these settings on your Wireless AP:
1
2
Log on to your Wireless AP.
Click the Basic Set-up tab.
a
b
Set the Wireless Network ID (SSID).
If you are adding your Wireless AP to an existing WLAN, set
the SSID to match your other Wireless network devices.
Each station on your WLAN must have the same SSID.
Click Save.
A message tells you that the new settings are saved.
Although you can choose to reboot now (by clicking the
Reboot button), continue with Step 3 on page 17 and reboot
at the end of this task.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the WLAN
3
Click the Security tab.
The Enable WEP Encryption setting is deselected by default.
Adaptec recommends that you protect your network by
enabling WEP encryption. Unprotected networks are
vulnerable to security breaches by unauthorized users.
a
Set the Enable WEP Encryption and WEP Key settings as
desired. (See Changing the WEP Encryption Settings on
page 22 for more information.)
If you are adding your Wireless AP to an existing WLAN, set
WEP Encryption to match your other Wireless network
devices.
Each station on your WLAN must have the same WEP
Encryption settings.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the WLAN
If you selected Enable WEP Encryption, set Security
b
Authentication Type to Both. (See About Security
Authentication Settings on page 24 for more information.)
Note: The Security page also lets you set MAC address
filtering. For more information, see Filtering MAC
Addresses on page 25.
4
5
Click Save.
Your changes are saved.
Click Reboot on the Success page. (You do not need to reboot
your computer.)
You have completed the Installation Task List.
For more information on customizing your WLAN, see Changing
the Set-up of Your WLAN on page 20.
Checking Your Wireless Connections
Once your Wireless AP is properly set up, you can view which
Wireless devices are connected to it at any time.
To check current connections:
1
Open the Wireless Access Point Utility and log on. (See page
12.)
2
Click the Connections tab.
The Media Access Control (MAC) address of each Wireless device
currently connected to your Wireless AP is listed. (See Filtering
MAC Addresses on page 25 for more information about MAC
addresses.)
3
Click Refresh to see the most up-to-date list.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Wireless Access Point Utility
Using the Wireless Access
Point Utility
This section provides an introduction to the basic functions of the
Wireless Access Point Utility. (See the next sections of this User’s
■
■
Click Save to save any changes you make on a page. Saved
changes don’t take effect until you reboot your Wireless AP.
Click Reboot to reboot your Wireless AP. (Rebooting happens
within seconds and does not cause your computer to reboot.)
The Reboot button appears in two places: in the Success
window that appears after you click Save, and on the
Administration page. (See Rebooting Your Wireless AP on page 27
for more information.)
■
Click Refresh to view your Wireless AP’s most up-to-date
information, including any recent setting changes.
Note: Remember, setting changes don’t take effect until you
reboot your Wireless AP.
■
■
Click Reset on the Administration page to change all
Wireless AP settings back to the default values. (You can also
reset your Wireless AP to its default settings by pressing and
holding the INIT button on the device for 5 seconds.)
Click Help for on-screen assistance with the Wireless Access
Point Utility.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
Changing the Set-up of
Your WLAN
1
You can use the Wireless Access Point Utility to change the set-up
of your WLAN by:
■
■
■
Changing the transfer rate. See page 21.
Changing the encryption (WEP) settings. See page 22.
Limiting access to your Wireless AP by filtering MAC
addresses. See page 25.
■
Changing the Administration password. See page 26.
Note: Adaptec recommends that you manage your
Wireless AP from a computer that is physically connected
to your Wireless AP through a network hub, switch, or
router, not connected over the Wireless network. It is
better to manage your Wireless AP from a wired
connection.
1
You can also use a web browser to make these changes if you know the IP
address of your Wireless AP.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
Changing the Transfer Rate
The default transfer rate setting, Automatic, allows your Wireless AP
to automatically adjust its transfer speed for optimal performance
and the longest operating range. Adaptec recommends that
However, if your Wireless AP’s transfer rate changes frequently, you
can set a lower transfer rate to achieve a more stable connection. The
fixed rate speed options are 11 Megabits per second (Mbps),
5.5 Mbps, 2 Mbps, or 1 Mbps.
To change the transfer rate for your Wireless AP:
1
Open the Wireless Access Point Utility and log on. (See page
12.)
2
Click the Basic Set-up tab.
3
4
In the Transfer Rate drop-down box, select the rate you want.
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
your session. You do not have to reboot your computer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
Changing the WEP Encryption Settings
Wired Equivalent Privacy (WEP) is a security feature that encrypts
the data being sent over the radio waves of your WLAN.
The default Enable WEP Encryption setting is Disabled. Disabled
encryption allows your Wireless devices to share data in plain text.
Caution: Adaptec strongly recommends that you protect your
network by enabling WEP encryption. Unprotected networks
are vulnerable to security breaches from unauthorized users.
!
Setting 64-Bit or 128-Bit encryption increases data security by
limiting network access through specified Wireless stations only,
although it may slow data transmission.
Set the level of security you require for your WLAN. For all the
computers on your WLAN to communicate with each other and
share data, they must have identical WEP Key settings. (WEP Keys
control encryption; the Default Key determines which of the four
WEP Keys are used for encryption and decryption.)
WEP keys can be numeric, alphabetic, or a combination of both.
You can choose between Hexadecimal, which restricts you to
numbers 0–9 and letters A–F, and Alphanumeric, which restricts
you to numbers 0–9 and letters a–z/A–Z.
Wireless Access Point Utility to create WEP keys and set a
default key. See Setting New WEP Keys on page 23 below for
more information.
To change the encryption setting of your Wireless AP:
1
Open the Wireless Access Point Utility and log on. (See page
12.)
2
Click the Security tab.
The Security page opens, as shown on page 17.
3
To enable encryption, select Enable WEP Encryption. Then
continue with Step 4.
To disable encryption, deselect Enable WEP Encryption, then
click Save. Click Reboot on the Success page when prompted.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
4
5
In the WEP Key Length drop-down box, choose 64-bit key or
128-bit key.
Type in the WEP Keys and Default Key used on your WLAN.
Ensure that they exactly match your WLAN WEP Keys.
Remember that alphanumeric WEP keys are case-sensitive.
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
Setting New WEP Keys
You can set new WEP keys two different ways:
■
Adaptec recommends that you create the keys manually if you
are adding your Wireless AP to an existing WLAN or have any
non-Adaptec brand devices on your WLAN. Go to Creating Keys
Manually to continue.
■
If you are setting up a new WLAN and have only Adaptec brand
products on your WLAN, you can create a passphrase that
automatically generates the required keys and sets a default key.
Go to Creating Keys With a Passphrase on page 24 to continue.
Creating Keys Manually
1
Enter the keys in the WEP Key 1 to WEP Key 4 text boxes.
The number of characters in your key depends on the key length
:
Number of HEX
characters
Number of Alphanumeric
characters
64-bit key
10
26
5
128-bit key
13
Note: Make a note of the WEP keys so that you can apply
them to all Wireless stations on your WLAN.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
2
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
your session. You do not have to reboot your computer.
Creating Keys With a Passphrase
1
2
Type in your chosen passphrase.
Click Generate.
The Wireless Access Point Utility will auto-generate the
required keys and set a default key.
Note: Make a note of the WEP keys so that you can apply
them to all Wireless stations on your WLAN.
3
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
your session. You do not have to reboot your computer.
About Security Authentication Settings
Open System authentication is null authentication. Any station can
connect to any Access Point and read all data that is sent in plain
text. Set Authentication to Open where performance is the main
issue and you have no need for security.
Shared Key authentication provides more security than Open
System authentication. In a Shared Key system, your wireless
stations and your Wireless AP share a secret encryption/
decryption key that helps prevent unauthorized users from
reading your data.
Set your Wireless AP’s Security Authentication setting to Both to
allow Wireless devices with either authentication setting to connect
to your Wireless AP.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
Filtering MAC Addresses
You can help prevent unauthorized users from accessing your
network by enabling MAC address filtering. MAC address filtering
lets you specify exactly which Wireless devices can connect to your
Wireless AP.
Note: Each Adaptec Wireless device is labelled with its
assigned MAC address. The MAC address is exclusive to that
device and cannot be altered.
1
Open the Wireless Access Point Utility and log on. (See page
12.)
2
3
Click the Security tab.
Click the Enable Filtering check box.
A check mark appears showing that this function is enabled, as
shown in Step 4 on page 25.
4
In the Add an Address text box, type in the MAC address of any
Wireless station allowed to connect to your Wireless AP.
5
6
Click Add address.
The MAC address appears in the Addresses to allow box.
Repeat Steps 4 and 5 until all desired MAC addresses are entered.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
7
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
your session. You do not have to reboot your computer.
To delete a MAC address:
1
2
3
In the Addresses to Allow box, click on the MAC address.
Click Remove Selected.
Click Save.
Your changes are saved. You must reboot your Wireless AP to
apply your changes. Click Reboot on the Success page, or
continue working in the Wireless Access Point Utility and click
Reboot from the Administration page (see page 27) at the end of
your session. You do not have to reboot your computer.
By default, no password is set for the Wireless Access Point Utility.
However, to increase network security and prevent unauthorized
users from accessing your Wireless AP, you should set an
Administration password.
To change the Administration password:
1
Open the Wireless Access Point Utility and log on. (See page
12.)
2
3
Click the Administration tab.
Type your new password in the top Change Password box, then
re-enter it in the box below.
4
Click Reboot. (You do not have to reboot your computer.)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Set-up of Your WLAN
Rebooting Your Wireless AP
You must reboot your Wireless AP to apply any changes you’ve
made and saved in the Wireless Access Point Utility.
Note: Rebooting happens within seconds and does not cause
your computer to reboot.
To reboot your Wireless AP:
1
2
3
Save any setting changes you’ve made.
Click the Administration tab.
Click Reboot.
The updated settings are applied.
Adjusting the Threshold Control Settings
Changes to the Transmit Threshold Control settings
(Fragmentation threshold and RTS threshold settings) on the
Advanced page can affect overall network performance. Adaptec
highly recommends that these settings be left at their default values.
27
Troubleshooting
Troubleshooting
If you encounter difficulties installing or using your Wireless AP,
work through these troubleshooting tips.
If you have difficulties achieving or maintaining a Wireless connection:
■
Check to see if radio interference is causing a problem. Move
your Wireless adapter away from your microwave oven, 2.4
GHz wireless telephone, baby monitor, or other wireless device.
■
Try connecting to your Wireless AP from a shorter distance.
Connection range can be as short as 100 feet in poor environments
.
If your computer can’t locate your Wireless AP:
■
your Wireless adapter away from your microwave oven, 2.4
GHz wireless telephone, baby monitor, or other wireless device.
■
■
Connection range can be as short as 100 feet in poor environments
.
Ensure that the Wireless Network ID (SSID) of your Wireless
NIC is the same as your Wireless AP’s. See Connecting to the
WLAN on page 14.
■
■
Ensure that if WEP is enabled that the Wireless NIC in your
computer and the Wireless Access Point both have identical
settings. See Connecting to the WLAN on page 14.
Ensure that the IP addresses of your computer and your
Wireless AP are on the same IP network. To set the IP address:
a
b
c
Open the Wireless Access Point Utility. (See page 12.)
Right-click your Wireless AP and select Set IP Address.
Click OK, then click Exit.
■
Ensure that the network protocols for your Wireless adapter are
installed. Refer to the adapter’s documentation for more
information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the Wireless Access Point Utility does not list your Wireless AP:
Ensure that you are running the Utility on a computer that is wired
to the Wireless AP through a network hub or switch, not connected
over the Wireless network. If you are accessing the Utility over the
WLAN, try connecting your computer to a network hub or switch
that is physically connected to your Wireless AP.
If your Wireless connection speed is very slow:
Your Wireless devices connect at the highest possible speed,
depending on the distance and the environment condition. To
increase connection speed, adjust the location and orientation of
your Wireless AP. You can also try changing to another channel.
If you click on a tab in the Wireless Access Point Utility and get a message
that says that the page cannot be displayed:
Click the Back button in your browser, wait several seconds, then
try clicking the tab again. You can also try closing the Utility and
re-opening it.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
About Wireless Technology and LANs
About Wireless Technology
and LANs
This section provides a very brief, very general overview of Wireless
technology and LANs. There are many books and Web sites dedicated
to this topic that can provide a more comprehensive explanation
.
What’s a LAN?
A network is a group of computers that are connected together in a
way that lets them share and exchange information and resources.
A Local Area Network, or LAN, is a network of computers that are in
the same general physical location, usually within a building or
small group of buildings. Computers on a LAN can share devices
such as printers or scanners, they can share and exchange files
without using floppy disks or CDs, and they can all use a single
Internet connection.
What’s a Wireless LAN?
A Wireless LAN (WLAN) uses radio signals instead of cables or
wires to connect all the computers in the network.
Adaptec Ultra Wireless products are based on the 802.11b standard
for wireless networks.
How Do I Create a Basic WLAN?
A WLAN can be as simple as two computers, each installed with a
Wireless Network Interface Card (NIC), such as Wireless USB
adapter or Wireless PC card. (This is Ad-hoc Mode.)
You can expand your WLAN to include more computers, and you
can incorporate a WLAN into a pre-existing wired LAN by using
hubs, Wireless Access Points, Wireless Routers, and additional
Wireless NICs. (This is Infrastructure Mode.)
information on wireless products.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
About Wireless Technology and LANs
What About Security?
You have multiple options for adding security to your WLAN. Set
security according to the needs of your network.
■
You can limit access to parts of the network by setting
passwords and creating special shared files. Refer to your
operating system’s documentation for more information.
■
You can set up a firewall to protect your network from intrusion
by the outside world (over the Internet) by installing a router.
information on Adaptec’s Wireless Router.
■
You can exclude unauthorized users from your WLAN by using
the security and encryption features built into your Wireless
device. See Connecting to the WLAN on page 14 and Changing the
Set-up of Your WLAN on page 20, and refer to your other
Wireless devices’ documentation for more details.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Technical Specifications
Standards
IEEE 802.11b compliant
Antenna
Built-in diversity dipole antenna
Frequency Range
■ 2.4 2.4835 GHz (Industrial Scientific
Medical Band)
■ DSSS (Direct Sequence Spread Spectrum)
Data Transmission Rate
■ 11 Mbps
■ 5.5 Mbps
■ 2 Mbps
■ 1 Mbps auto fall-back
Access Mode
Data Security
Output Power
Receiving Sensitivity
Roaming
Infrastructure mode
64-bit and 128-bit WEP encryption
15 ~ 16.5 dBm
-85dBm @ 11Mbps
IEEE 802.11 compliant
Channels
■ 11 channels (US, Canada)
■ 13 channels (Europe)
Coverage Area
(Depending on environment)
■ Indoors: up to 50 M (165 ft) @ 11 Mbps;
up to 80 M (265 ft) @ Mbps or lower
■ Outdoors: up to 150 M (500 ft) @ 11 Mbps;
up to 300 M (1000 ft) @ Mbps or lower
Operating Environment:
Operating Temperature
Storage Temperature
Humidity
0 C to 50 C
-25 C to 70 C
10% to 90% non-condensing
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Glossary
Access Point
An Access Point (AP) is a wired controller that sends data to the
wireless NICs installed in your network computers, and receives
data back from them. An AP is often connected to the network
computer that has Internet access, or is directly connected to a DSL
or cable modem. The AP then allows other stations on your WLAN
to access the Internet.
Access Point Name
The Access Point Name displayed on the Basic Set-up page of the
Wireless Access Point Utility identifies the Wireless AP on a wired
network. It has no security function, but makes it easier to identify
your Wireless AP.
Ad-hoc mode
See operating mode.
channel
Your Wireless device communicates with other devices on your
WLAN over a specific channel. The channel is similar to a radio
channel—any Wireless device linking to your Wireless device must
be “tuned” to the same channel.
In Infrastructure mode, the channel is selected by the Access Point
or Router. It automatically selects a channel from the range
available for your geographical location (11 channels are available
for use in the United States) and communicates that channel to
your Wireless device. In Ad Hoc mode only, you can set the
channel yourself.
device driver
A device driver is a software program that lets an adapter (such as
a PC card, PCI card, or USB adapter) or any other device (such as a
printer or CD-ROM drive) communicate with the computer that it's
connected to.
Ethernet
Ethernet is a popular networking system that uses NICs and cables
(and often, other networking devices such as bridges and hubs) to
create a LAN.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
firewall
A firewall is software or a security device that helps prevent
unauthorized users from accessing your LAN or WLAN from
outside your network (over the Internet). A firewall uses special
software that keeps unauthorized users out of your network.
hot-swap
off your computer.
hub
A hub works with a computer like a power strip works with an
electrical outlet—it multiplies the number of ports you have so that
you can have more devices plugged in at the same time.
Infrastructure mode
See operating mode.
LAN
Stands for Local Area Network. LANs are wired networks.
LED
Stands for Light-Emitting Diode. LEDs are usually used as status
indicators on electronic devices.
MAC address
A Media Access Control (MAC) address uniquely identifies each
network device on your network (for instance, your Wireless USB
adapter or Wireless Access Point). A MAC address is built into
each device, so you can’t alter MAC addresses. Normally, a
network
A network is two or more computers connected so that they can
share information, equipment, and programs.
network device
A network device is any device (such as an Access Point or a
computer with a NIC) that connects to the network. See also
station.
network protocols
Network protocols are rules that determine how devices on a
network communicate with each other.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
NIC
Stands for Network Interface Card. A Wireless NIC is a computer
card (such as a Wireless PCI adapter, Wireless PC card, or Wireless
USB adapter) that lets your computer link to a network.
operating mode
Ad-hoc mode (sometimes referred to as peer-to-peer mode) allows
two computers to connect only to each other in wireless-to-wireless
(or peer-to-peer) communication.
Infrastructure mode is for WLANs that include an Access Point
(AP) or Router and multiple computers.
PCI
Stands for Peripheral Component Interconnect. A PCI slot is an
expansion slot usually found in Desktop computers.
peer-to-peer mode
See operating mode.
preamble
A preamble is a signal used to synchronize the transmission timing
on your WLAN. A series of transmission pulses is sent ahead of the
data to signal a new transmission. This ensures that Wireless
devices receiving the data correctly interpret when the
transmission starts.
SSID
See Wireless Network ID.
station
A station is any device (including notebooks, PCs, and handheld
devices) with 802.11 Wireless capability. See also network device.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
transfer rate
The transfer rate is the speed at which your Wireless device is
sending data. It is expressed in megabits per second (Mbps).
The default transfer rate setting, Auto Rate (or Automatic), allows
your Wireless device to automatically adjust its transfer speed for
optimal performance and the longest operating range. Adaptec
recommends that whenever possible, you maintain the Auto Rate
setting.
However, if your Wireless device's transfer rate changes frequently,
you can set a lower transfer rate to achieve a more stable
connection. The fixed rate speed options are 11Mbps (the highest
rate), 5.5Mbps, 2Mbps, 1 or 2 Mbps, or 1 Mbps.
USB
Stands for Universal Serial Bus. USB is the interface between your
computer and the USB devices you plug into it.
WEP
Wired Equivalent Privacy (WEP) is a security feature that provides
confidentiality (by encrypting the data being sent over the radio
waves of your WLAN) and authentication (by using a shared key
between two wireless devices).
WEP key
WEP keys control encryption.
WEP keys can be numeric, alphabetic, or a combination of both.
You can choose between Hexadecimal, which restricts you to
numbers 0–9 and letters A–F, and Alphanumeric, which restricts
you to numbers 0–9 and letters a–z/A–Z.
Alphanumeric WEP keys are case-sensitive.
The number of characters in your key depends on the key length
:
Number of HEX
characters
Number of Alphanumeric
characters
64-bit key
10
26
5
128-bit key
13
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Wireless device
A Wireless device (or Wireless network device) is any Wireless
device that connects to the network. See also network device.
Wireless Network ID
The Wireless Network ID (also referred to as the SSID) is like a
secret code that your Access Point and your Wireless devices share
to prevent unauthorized users from accessing your WLAN. Your
Wireless devices can only connect to your Access Point if they have
the same SSID as the Access Point. Wireless devices in Ad-hoc
mode must be set to the same SSID.
The Wireless Network ID is case-sensitive and must not exceed 32
characters.
WLAN
Stands for Wireless Local Area Network. WLANs are use radio
signals instead of wires to connect network stations.
WLAN station
See station.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, CA 95035 USA
© 2002 Adaptec, Inc.
All rights reserved. Adaptec and the Adaptec logo
are trademarks of Adaptec, Inc. which may be
registered in some jurisdictions.
Part Number: 513358-06, Ver. AA, LB 10/02
Download from Www.Somanuals.com. All Manuals Search And Download.
|