R
USER’S GUIDE
AUA-3121
DUOCONNECT ADAPTER
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Technical Support
If you have questions about installing or using your Adaptec product, check this
document first—you will find answers to most of your questions here. If you need
further assistance, use the support options listed below.
Technical Support Identification (TSID) Number
■
Before contacting Technical Support, you need your unique 12-digit TSID
number. The TSID number identifies your product and support status.
■
The TSID number is included on two white, bar-coded labels, like the example
below.
Support Options
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for articles,
troubleshooting tips, and frequently asked questions for your product.
■
For support via Email, submit your question to Adaptec's Technical Support
Specialists at ask.adaptec.com.
■
To order Adaptec products, including accessories and cables, call +1 408-957-7274. Or,
Europe
■
■
German and English: Search the Adaptec Support Knowledgebase (ASK) at
ask-de.adaptec.com for articles, troubleshooting tips, and frequently asked
questions for your product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-de.adaptec.com.
■
■
French: Search the Adaptec Support Knowledgebase (ASK) at ask-fr.adaptec.com
for articles, troubleshooting tips, and frequently asked questions for your
product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-fr.adaptec.com.
To order Adaptec products, including accessories and cables, call +44 118 934 6160.
Australia and New Zealand
■
■
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask.adaptec.com.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Hong Kong and China
■
■
Fax Technical Support at +852 2869 7100.
Singapore
■
Visit our Web site at www.adaptec.com.
Japan
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.co.jp
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 5-Year Hardware Warranty
1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from
defects in material and workmanship for a period of five (5) years from the date of purchase.
If the product should become defective within the warranty period, Adaptec, at its option,
will repair or replace the product, or refund the purchaser’s purchase price for the product,
provided it is delivered at the purchaser’s expense to an authorized Adaptec service facility
or to Adaptec.
2. Repair or replacement parts or products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced parts or products shall become the property of
Adaptec. This warranty shall not apply if the product has been damaged by accident,
misuse, abuse or as a result of unauthorized service or parts.
3. Warranty service is available to the purchaser by delivering the product during the warranty
period to an authorized Adaptec service facility or to Adaptec and providing proof of
purchase price and date. The purchaser shall bear all shipping, packing and insurance costs
and all other costs, excluding labor and parts, necessary to effectuate repair, replacement or
refund under this warranty.
4. For more information on how to obtain warranty service, write or telephone Adaptec at 691
South Milpitas Boulevard, Milpitas, CA 95035, (800) 959-7274.
5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS
BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF
UNAUTHORIZED SERVICE OR PARTS.
6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHICH NOW
OR HEREAFTER MIGHT OTHERWISE ARISE RESPECT TO THIS PRODUCT. IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A) HAVE NO GREATER
DURATION THAN 5 YEARS FROM THE DATE OF PURCHASE, (B) TERMINATE
AUTOMATICALLY AT THE EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT
PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS PRODUCT BECOMES
DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE
REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION
LOSS OF DATA, ARISING FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ARE NOT THE RESPONSIBILITY OF ADAPTEC AND, TO THE EXTENT PERMITTED BY
LAW, ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE
EXTENT NOT UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.
7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU.
8. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Software License Agreement
PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE
LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY
BE BUNDLED WITH THIS PRODUCT.
BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE
LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH
DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE
TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED
PRODUCT FOR A FULL REFUND.
In return for acquiring a license to use the Adaptec software (“Software”) and the related
documentation, you agree to the following terms and conditions:
1. License. This Agreement grants you, the Licensee, a license to:
a. Use the Software on a single computer system or on multiple workstations, systems and
servers which incorporate an Adaptec RAID controller and may be accessed by multiple
users from multiple locations. You may make as many installations of the Software as
needed, but must restrict such installation only to systems, workstations or servers
using an Adaptec RAID controller.
b. Make one copy of the Software in machine readable form solely for back-up purposes
provided you reproduce Adaptec’s copyright notice and any proprietary legends.
2. Restrictions. You may not distribute copies of the Software to others. You may not post or
otherwise make available the Software, or any portion thereof, in any form, on the Internet.
You may not use the Software in a computer service business, including in time sharing
applications. The Software contains trade secrets and, in order to protect them, you may not
decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-
perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,
RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS
BASED UPON THE SOFTWARE OR ANY PART THEREOF.
3. Ownership of Software. As Licensee, you own the media upon which the software is
recorded or fixed, but Adaptec and its licensors retain title and ownership of the Software
recorded on the original media and all subsequent copies of the Software, regardless of the
form or media in which or on which the original and other copies may exist. This license is
not a sale of the Software or any copy.
4. Confidentiality. You agree to maintain the Software in confidence and that you will not
disclose the Software to any third party without the express written consent of Adaptec. You
further agree to take all reasonable precautions to preclude access of unauthorized persons
to the Software.
5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may
terminate the license at any time by destroying the Software (including the related
documentation) together with all copies or modifications in any form. Adaptec will have the
right to terminate our license immediately if you fail to comply with any term or condition
of this Agreement. Upon any termination, including termination by you, you must destroy
the Software (including the related documentation), together with all copies or
modifications in any form.
6. Special Terms Applicable to Databases. Where a database is included with the Software, you
acknowledge that it is licensed only in connection with the use of the Software to perform
disc creation, and that the database and all data derived therefrom must be maintained in
confidence in accordance with the provisions of Section 4. This license does not grant you
any rights to distribute or disclose such database or data.
7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the
Software is furnished will be free from defects in material or workmanship under normal
use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC
AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR
RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE
FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS
LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE
FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE NO
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO
v
Download from Www.Somanuals.com. All Manuals Search And Download.
NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied
warranties or limitations on how long an implied warranty may last, so the above
limitations may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of
this warranty, shall be:
a. The replacement of any media not meeting the above limited warranty which is
returned to Adaptec; or:
b. If Adaptec or its distributor is unable to deliver replacement media which is free from
defects in materials or workmanship, you may terminate this Agreement by returning
the Software and your money will be refunded.
9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO
YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,
INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF
ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the
exclusion or limitation of special, incidental, or consequential damages, so the above
limitation or exclusion may not apply to you.
10. Export. You acknowledge that the laws and regulations of the United States and other
countries may restrict the export and re-export of the Software. You agree that you will not
export or re-export the Software or documentation in any form in violation of applicable
United States and foreign law.
11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the
Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is
subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is
acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure
by the Government is subject to the restrictions of this Agreement in accordance with 48
C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and
49 C.F.R. 227.7202-1 of the DoD FAR Supplement and its successors.
12. General. You acknowledge that you have read this Agreement, understand it, and that by
using the Software you agree to be bound by its terms and conditions. You further agree that
it is the complete and exclusive statement of the agreement between Adaptec and you, and
supersedes any proposal or prior agreement, oral or written, and any other communication
between Adaptec and you relating to the subject matter of this Agreement. No additional or
any different terms will be enforceable against Adaptec unless Adaptec gives its express
consent, including an express waiver of the terms of this Agreement, in writing signed by an
officer of Adaptec. You assume full responsibility for the use of the Software and agree to
use the Software legally and responsibly. This Agreement shall be governed by California
law, except as to copyright matters, which are covered by Federal law. This Agreement is
deemed entered into at Milpitas, California by both parties. Should any provision of this
Agreement be declared unenforceable in any jurisdiction, then such provision shall be
deemed severable from this Agreement and shall not affect the remainder hereof. All rights
in the Software not specifically granted in this Agreement are reserved by Adaptec.
Should you have any questions concerning this Agreement, you may contact Adaptec by
writing to:
Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. However, if this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/television technician for help.
• Use a shielded and properly grounded I/O cable and power cable to ensure compliance of this
unit to the specified limits of the rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Adaptec, Inc.
AUA-3121 DuoConnect
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
European Union Compliance Statement
This Information Technology Equipment has been tested and found to comply with
the following European directives:
EMC Directive 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC
EN 50081-1 (1992)
EN55022 (1994) Class B
EN 50082-1 (1992)
EN61000-4-2 (1998)
EN61000-4-3 (1998)
EN61000-4-4 (1995)
EN61000-4-5 (1995) Surges
EN61000-4-6 (1996) Conducted immunity
EN61000-4-11 (1994) Supply dips of variation
Australian/New Zealand Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to the Australian/New Zealand standard AS/NZS 3548 set out by
the Spectrum Management Agency.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
Japanese Compliance (Voluntary Control Council Initiative)
This equipment complies to class B Information Technology equipment based on
VCCI (Voluntary Control Council for Interface). This equipment is designed for home
use but it may causes radio frequency interference problem if used too near to a
television or radio. Please handle it correctly per this documentation.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
This guide explains how to install the DuoConnect Host Bus
Adapter in a PCI slot and how to install its associated drivers. It
also describes how to connect a USB device and a digital video
camera.
Overview
The DuoConnect adapter enables you to connect USB 1.1 (EHCI),
USB 2.0 (OHCI), and FireWire (IEEE 1394) devices to your PC-
compatible or Macintosh computer.
USB 2.0 is the fastest USB standard, capable of transferring data at
up to 480 megabits per second. USB 2.0 devices are compatible
with USB 1.1 devices.
FireWire is a serial bus protocol similar to USB 2.0. It transfers data
at speeds of up to 400 megabits per second and is used with
computer peripherals as well as with consumer electronics, such as
digital video cameras and game consoles.
The DuoConnect adapter is a 32-bit, 33-MHz PCI adapter and
works in any PCI slot.
Refer to the Readme file on the DuoConnect CD for a list of
operating systems the DuoConnect adapter supports.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Kit Contents
■
DuoConnect adapter
■
FireWire cable (6-foot/1.8 meter, 6-to-4-pin FireWire cable used
to connect digital video cameras)
■
■
Printed Adaptec DuoConnect Installation Guide
DuoConnect CD containing:
–
–
–
–
–
This User’s Guide
Adobe Acrobat Reader software
Drivers
Readme file
Video editing software
System Requirements
In order to use the DuoConnect adapter, you need
■
One of the following types of computers:
■
Windows 2000, Windows Me, or Windows 98 SE computer
with a 200-MHz (or faster) processor
■
Power Macintosh Beige G3, Rev. B or newer, with Macintosh
OS 9.0.4 and later
Note: The DuoConnect adapter is not compatible with blue
and white G3s. For the latest information on operating system
support, see the Readme file on the CD or check the Adaptec
■
■
An available PCI slot (32-bit or 64-bit, 3.3-volt or 5-volt, 33-MHz
and 66-MHz)
A CD-ROM drive
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the DuoConnect Adapter
Installing the DuoConnect
Adapter
1
Discharge any static electricity from your body by touching a
back of your computer).
2
3
Turn off power to the computer and disconnect the power cord.
Open the computer cabinet. See your computer documentation
for specific instructions, if needed.
4
Locate an unused 32-bit or 64-bit PCI expansion slot and
remove the expansion slot cover. Save the cover screw for use in
Step 5 on page 4.
Slot cover
screw
64-bit PCI slot
Expansion
slot cover
32-bit PCI slot
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the DuoConnect Adapter
5
Insert the DuoConnect adapter in a PCI expansion slot and
press down firmly until the adapter clicks into place. Then,
replace the slot cover screw. When installed properly, the
adapter should be level with the expansion slot.
6
Connect the DuoConnect adapter internal power connector to a
spare 4-pin mini power connector (similar to the connector on a
floppy drive), as shown below. This connector supplies optional
bus power to the FireWire ports. If your system does not have a
spare power connector, you can buy one at most computer and
Adapter power connector
System power connector
7
Close the computer cabinet and reattach the power cord.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Installing the Windows
Drivers
The DuoConnect adapter contains the four controllers:
Controller
Type
Number of
Controllers Description
USB 1.1
USB 2.0
FireWire
2
1
1
NEC USB OHCI-compliant
Adaptec AUA-3121 PCI to USB EHCI-compliant
Texas Instruments OHCI-compliant IEEE 1394
When successfully installed, these controllers are displayed
separately in the Windows Device Manager.
Windows XP
1
Start Windows XP.
Windows XP will automatically discover the new hardware and
start the Found New Hardware Wizard to walk you through
the device driver installation.
2
Select Install from a list or specific location (Advanced), then
select Next.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
3
Select Don’t search, I will choose the driver to install, then
click Next.
4
5
6
Click Next again.
Click Have Disk.
Insert the Adaptec USB2connect CD into the CD-ROM drive.
Type the drive letter for your CD-ROM drive in the Copy
manufacturer’s files from box, as shown below, and click OK.
Note: Your CD-ROM drive may have a different drive letter
than the one shown in the example above.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
On the next screen, click Continue Anyway.
7
8
When the installation is complete, click Finish.
9
If you are prompted to restart the computer, click Yes.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
10 To verify that the driver is installed, right-click the My
Computer desktop icon, select Properties, click the Hardware
tab, then click the Device Manager button. Expand Universal
Serial Bus controllers and verify that the information shown
below appears
.
FireWire controller
USB 2.0 controller
(see note)
USB 1.1 controllers
Note: USB 2.0 controller – Your controller is identified by its
model number, which may differ from the model number
shown in this User’s Guide.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Windows 2000
1
Turn on the computer and insert the DuoConnect CD.
2
Log in as Administrator
Note: You need to log in as administrator or acquire administrator
privileges for your computer in order to complete the driver
installation.
During the operating system startup, the adapter is detected
and Windows searches for embedded drivers for the card.
Note: It may take longer than usual for your system to restart
because the operating system is locating and installing new
drivers.
3
The Found New Hardware Wizard opens. Click Next.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
4
In the Install Hardware Device Drivers window, select Search
for a suitable driver for my device (Recommended), and click
Next.
5
In the Locate Driver Files window, uncheck all options except
CD-ROM drives, and click Next.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
6
In the Driver Files Search Results window, ensure that the Install
one of the other drivers check box is not checked, and click Next
.
Note: The driver name may differ from the one shown in the
example above, but it will be an .inf file.
7
8
When Windows is finished copying drivers, click Finish.
Restart your computer.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
To verify that the driver is installed, right-click the My
9
Computer desktop icon, select Properties, click the Hardware
tab, and click the Device Manager button. Then, expand
IEEE 1394 Bus host controllers and Universal Serial Bus
Controllers. Verify that the information shown below appears.
FireWire controller
USB 2.0 controller
USB 1.1 controllers
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Windows Me
1
Turn on or restart your computer and insert the DuoConnect
CD.
2
When the Add New Hardware Wizard appears, select Automatic
search for a better driver (Recommended) and click Next.
3
4
After the driver is copied, click Finish.
Windows will now install the FireWire drivers. Select Automatic
search for a better driver (Recommended) and click Next.
5
When Windows has finished copying the FireWire drivers, click
Finish.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
6
If you see a message that the PCI Universal Serial Bus driver
was not located, select Automatic search for a better driver
(Recommended). Then, insert the DuoConnect CD and click
Next.
7
8
When Windows has finished copying the USB 2.0 drivers from
the DuoConnect CD, click Finish.
Restart your computer.
Note: It may take longer than usual for your system to restart
because the operating system is locating and installing the
new drivers.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
9
To verify that the driver is installed, right-click the My Computer
desktop icon, select Properties, and click the Device Manager
tab. Expand 1394 Bus Controller and Universal Serial Bus
Controllers. Verify that the information shown below appears.
FireWire controller
USB 2.0 controller
USB controllers
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Windows 98 SE
1
Turn on or restart your computer and insert the DuoConnect
CD.
2
3
When the Add New Hardware Wizard opens, click Next.
Select Search for the best driver for your device
(Recommended), and click Next.
4
In the window that appears, uncheck all options and click Next.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
In the window shown below, click Next.
5
Note: The driver name may differ from the one shown in the
example above, but it will be an .inf file.
6
7
Click Next again. If Windows prompts you to restart your
computer, click No.
When the Add New Hardware Wizard opens, click Next.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Select Search for the best driver for your device
8
(Recommended), and click Next.
9
In the window shown below, uncheck all options and click Next.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
10 Select The updated driver (Recommended), and click Next.
11 You may see a message that Windows is searching for the
driver. Click Next.
12 When you see the following prompt, insert your Windows 98 SE
CD and click OK.
13 Type the drive letter for your CD-ROM drive in the Copy files from
box and click OK. Your CD-ROM drive letter may be d (as
shown below) or some other letter.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
Note: If you have copied the driver files onto your hard drive
and know where they are located, you can browse to that
folder instead of inserting the Windows 98 SE CD.
14 When the third driver has been copied onto your system, the
following window appears. Click Finish.
The driver for the first OHCI (USB 1.1) controller is installed.
15 To install the driver for the second OHCI controller, repeat
steps 7 through 14.
16 The Hardware Wizard starts again and attempts to install the
EHCI USB 2.0 drivers. Click Next.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
17 Select Search for the best driver for your device (Recommended)
,
and click Next.
18 Check the CD-ROM drive option, insert the DuoConnect CD,
and click Next.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
19 If the following screen appears, select The updated driver
(Recommended), and click Next. Otherwise, proceed to Step 21.
20 Windows shows you the location of the driver. Click Next.
21 When Windows is finished copying files, click Finish.
22 Windows will now install the FireWire drivers. When the
wizard starts, click Next.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
23 Select Search for the best driver for your device (Recommended)
,
and click Next.
24 In the window shown below, uncheck all options and click Next.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
25 Select The updated driver (Recommended), and click Next.
26 You may see a message that Windows is searching for the
driver. Click Next.
27 When you see the following prompt, insert your Windows 98 SE
CD in your CD-ROM drive and click OK.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
28 Type the drive letter for your CD-ROM drive in the Copy files
from box, and click OK. Your CD-ROM drive letter may be d (as
shown below) or some other letter.
Note: If you have copied your driver files onto your hard drive
and know where they are located, you can browse to that
folder instead of inserting the Windows 98 SE CD.
29 When the following window appears, click Finish.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Windows Drivers
30 To verify that the drivers are installed, right-click the My
Computer desktop icon, select Properties, and click the Device
Manager tab. Then, expand IEEE 1394 Bus Controller and
Universal Serial Bus Controllers. Verify that the information
shown below appears.
FireWire controller
USB 2.0 controller
USB 1.1 controllers
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Macintosh Driver
Installing the Macintosh
Driver
In this procedure, you install the DisableSleep driver, which
prepares your Macintosh computer to use the DuoConnect card.
Note: Blue and white G3s are not supported.
1
2
3
Turn on or restart the computer and insert the DuoConnect CD.
Double-click the Start Installation Here file on the CD.
Follow the instructions to install the latest Macintosh USB
drivers, if necessary.
4
5
6
Double-click the DuoConnect Installer file and follow the
instructions.
After the installation is complete, click Restart, if necessary, to
make the new settings take effect.
Verify that the card is seen by your computer by clicking Apple
System Profiler in the Apple Menu. Then, click the Devices
and Volumes tab.
Note: The Apple System Profiler (version 2.5.8 or earlier)
identifies the DuoConnect adapter incorrectly. If you have
one of these earlier versions, download a new version from
Apple's software update page.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Macintosh Driver
7
Scroll to the PCI area and click the arrow next to each PCI slot to
reveal the PCI card information. If the DuoConnect adapter is
installed properly, you will see one of the following information
listings under one of the slots:
If you do not see the DuoConnect adapter listed, verify that the
Apple USB extensions are loaded and enabled. Also, verify that
the adapter is seated properly.
If you are still unable to resolve a problem, see the Adaptec
troubleshooting information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Macintosh Driver
DuoConnect and Deep Sleep
The DuoConnect adapter does not
support Deep Sleep on Power Macintosh
G4 computers. When you use the
DuoConnect installer as described on
page 27, the DisableSleep driver (shown at right) is installed and
the Deep Sleep feature is disabled. After you install the
DuoConnect driver, if you try to put a Power Macintosh G4 into
Deep Sleep, you will see the message shown below.
If you want to remove USB connectivity from your Macintosh
computer and continue using Deep Sleep, simply remove the
DuoConnect adapter from your computer and the DisableSleep
extension is not used.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting USB Devices
Connecting USB Devices
You can connect standard USB 1.1 or high-speed USB 2.0 devices to
the connectors of the DuoConnect adapter, as shown below.
Hotplugging
The DuoConnect adapter supports hot-plugging, allowing USB
devices to be attached and recognized while the computer is on.
Device manufacturers support hot-plugging in different ways.
Refer to the instructions for each device for attaching and mounting
recommendations.
Note: Moving a device from one adapter connector to another
can cause the operating system to initiate a new hardware
installation process. Refer to the Readme file for details.
Hubs
The following figure shows the recommended configuration for
connecting USB 1.1 and USB 2.0 devices. Note that you could
connect USB 2.0 devices to a USB 1.1 hub, but the USB 2.0 devices
would run at USB 1.1 speeds.
DuoConnect adapter
USB 1.1 hub
USB 2.0 hub
USB 2.0 or
1.1 devices
USB 1.1
devices
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting USB Devices
Connecting a Digital Video Camera
Two types of FireWire connectors are commonly used: a 4-pin and
a 6-pin. The DuoConnect adapter contains two external 6-pin
connectors suitable for use with a camera. Digital video cameras
use a 4-pin connector and may not include a cable. (Other
peripherals typically use a 6-pin connector.)
To attach a digital video camera
1
Using a standard 6-to-4 pin FireWire cable (included in the kit)
plug the larger, 6-pin connector of the cable into an external
FireWire port on the DuoConnect adapter.
4-pin device connector
6-pin adapter connector
2
Plug the smaller, 4-pin connector of the FireWire cable into the
FireWire port on your digital video camera.
Caution: When inserting the FireWire 4-pin connector into the
digital video camera, make sure the connector and the port
are properly aligned. Otherwise, you might bend and damage
the pins in the connector of the camera.
!
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
If you encounter difficulties while installing the DuoConnect
adapter, check the following:
■
Is your device powered on?
■
Is the cable properly connected to the DuoConnect adapter and
the device?
■
■
Is the adapter seated evenly in the PCI slot?
latest driver availability.
■
■
If you encounter any problems with the software, check the
User’s Guide and Readme file on the CD.
Windows only: Is bus mastering support provided and enabled
the motherboard documentation for details.
■
Windows only: Is the driver loaded properly? First, try moving
the adapter to a different PCI slot. Windows 2000 only: Check the
Windows 2000 Event Log. Refer to the Windows documentation
for details.
■
Power Macintosh only: Is the adapter seen by the Apple System
Profiler. See Step 6 on page 27 for details.
For more troubleshooting information, visit http://www.adaptec.com
32
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, CA 95035 USA
© 2001-2002 Adaptec, Inc.
All rights reserved. Adaptec and the Adaptec logo
are trademarks of Adaptec, Inc. which may be
registered in some jurisdictions.
Part Number: 512925-06, Ver. AE LB 06/02
Download from Www.Somanuals.com. All Manuals Search And Download.
|