VideOh! DVD AVC-2210
User’s Guide
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Technical Support
If you have questions about installing or using your Adaptec product, check this
document first—you will find answers to most of your questions here. If you need
further assistance, use the support options listed below.
Technical Support Identification (TSID) Number
■
Before contacting Technical Support, you need your unique 12-digit TSID
number. The TSID number identifies your product and support status.
■
The TSID number is included on two white, bar-coded labels, like the example
below. Affix your TSID label to the printed Installation Guide.
Support Options
■
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for
articles, troubleshooting tips, and frequently asked questions for your product.
For support via Email, submit your question to Adaptec's Technical Support
Specialists at ask.adaptec.com.
To order Adaptec products, including accessories and cables, call
+1 408-957-7274. Or, you can order cables online at
Europe
■
■
German and English: Search the Adaptec Support Knowledgebase (ASK) at
ask-de.adaptec.com for articles, troubleshooting tips, and frequently asked
questions for your product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-de.adaptec.com.
■
■
French: Search the Adaptec Support Knowledgebase (ASK) at ask-fr.adaptec.com
for articles, troubleshooting tips, and frequently asked questions for your
product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-fr.adaptec.com.
To order Adaptec products, including accessories and cables, call
+44 118934 6160. Or, you can order cables online at
Japan
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.co.jp
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 2-Year Hardware Warranty
1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from
defects in material and workmanship for a period of two (2) years from the date of purchase.
If the product should become defective within the warranty period, Adaptec, at its option,
will repair or replace the product, or refund the purchaser’s purchase price for the product,
provided it is delivered at the purchaser’s expense to an authorized Adaptec service facility
or to Adaptec.
2. Repair or replacement parts or products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced parts or products shall become the property of
Adaptec. This warranty shall not apply if the product has been damaged by accident,
misuse, abuse or as a result of unauthorized service or parts.
3. Warranty service is available to the purchaser by delivering the product during the
warranty period to an authorized Adaptec service facility or to Adaptec and providing
proof of purchase price and date. The purchaser shall bear all shipping, packing and
insurance costs and all other costs, excluding labor and parts, necessary to effectuate repair,
replacement or refund under this warranty.
4. For more information on how to obtain warranty service, write or telephone Adaptec at 691
South Milpitas Boulevard, Milpitas, CA 95035, (800) 959-7274.
5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS
BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF
UNAUTHORIZED SERVICE OR PARTS.
6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHICH NOW
OR HEREAFTER MIGHT OTHERWISE ARISE RESPECT TO THIS PRODUCT. IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A) HAVE NO GREATER
DURATION THAN 2 YEARS FROM THE DATE OF PURCHASE, (B) TERMINATE
AUTOMATICALLY AT THE EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT
PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS PRODUCT BECOMES
DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE
REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION
LOSS OF DATA, ARISING FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ARE NOT THE RESPONSIBILITY OF ADAPTEC AND, TO THE EXTENT PERMITTED BY
LAW, ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE
EXTENT NOT UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.
7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU.
8. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Software License Agreement
PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE SOFTWARE
LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE SOFTWARE MAY
BE BUNDLED WITH THIS PRODUCT.
BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO THE
LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET FORTH
DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE LICENSE
TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE UNUSED
PRODUCT FOR A FULL REFUND.
(1) In return for acquiring a license to use the Adaptec software, which may include software
from third party licensors and patches made available by Adaptec (“Software”), and the related
documentation, you agree to the following terms and conditions:
1. License. This Agreement grants you, the Licensee, a license to:
a. Use the Software on a single computer system, which is not intended for use by more
than one (1) user; and:
b. Make one copy of the Software in machine readable form solely for back-up purposes,
provided you reproduce Adaptec’s copyright proprietary legends as well as the
copyright and proprietary notices of any third party licensors whose software may be
incorporated. You shall not remove any copyright notices in the Software.
Notwithstanding the foregoing, the Software may be used on the home, laptop or other
secondary computer of the principal user of the Software, and an additional copy of the
Software may be made to support such use. As used in this license, the Software is “in
use” when it is either loaded into RAM or installed on a hard disk or other permanent
memory device. The Software may be “in use” on only one computer at any given time.
You agree to use the Software in compliance with all applicable laws, including
copyright laws, and that you will not copy, transmit, perform, or distribute any audio or
other content using the Software without obtaining all necessary licenses or permissions
from the owner of the content.
2. Restrictions. You may not distribute copies of the Software to others. You may not post or
otherwise make available the Software, or any portion thereof, in any form, on the Internet.
You may not use the Software in a computer service business, including in time sharing
applications. You may not create additional classes, interfaces or subpackages of any portion
of the Software. The Software contains trade secrets and, in order to protect them, you may
not decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-
perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,
RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS
BASED UPON THE SOFTWARE OR ANY PART THEREOF.
3. Ownership of Software. As Licensee, you own the media upon which the software is
recorded or fixed, but Adaptec and its licensors retain title and ownership of the Software
recorded on the original media and all subsequent copies of the Software, regardless of the
form or media in which or on which the original and other copies may exist. This license is
not a sale of the Software or any copy.
4. Confidentiality. You agree to maintain the Software in confidence and that you will not
disclose the Software to any third party without the express written consent of Adaptec. You
further agree to take all reasonable precautions to preclude access of unauthorized persons
to the Software.
5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may
terminate the license at any time by destroying the Software (including the related
documentation) together with all copies or modifications in any form. Adaptec will have the
right to terminate our license immediately if you fail to comply with any term or condition
of this Agreement. Upon any termination, including termination by you, you must destroy
the Software (including the related documentation), together with all copies or
modifications in any form.
6. Special Terms Applicable to Databases. Where a database is included with the Software, you
acknowledge that it is licensed only in connection with the use of the Software to perform
disc creation, and that the database and all data derived therefrom must be maintained in
confidence in accordance with the provisions of Section 4. This license does not grant you
any rights to distribute or disclose such database or data.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Limited Warranty. Adaptec and its Licensors warrant only that the media upon which the
Software is furnished will be free from defects in material or workmanship under normal
use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC
AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR
RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION.
EXCEPT FOR THE FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS
MAKE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED,
AS TO NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of
implied warranties or limitations on how long an implied warranty may last, so the above
limitations may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
8. The entire liability of Adaptec and its Licensors, and your exclusive remedy for a breach of
this warranty, shall be:
a. The replacement of any media not meeting the above limited warranty which is
returned to Adaptec; or:
b. if Adaptec or its distributor is unable to deliver replacement media which is free from
defects in materials or workmanship, you may terminate this Agreement by returning
the Software and your money will be refunded.
THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND
ITS LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY.
9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO
YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,
INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF
ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the
exclusion or limitation of special, incidental, or consequential damages, so the above
limitation or exclusion may not apply to you.
10. Export. You acknowledge that the laws and regulations of the United States and other
countries may restrict the export and re-export of the Software. You agree that you will not
export or re-export the Software or documentation in any form in violation of applicable
United States and foreign law.
11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the
Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is
subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is
acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure
by the Government is subject to the restrictions of this Agreement in accordance with 48
C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and 48 C.F.R.
227.7202-1 of the DoD FAR Supplement and its successors.
12. General. You acknowledge that you have read this Agreement, understand it, and that by
using the Software you agree to be bound by its terms and conditions. You further agree that
it is the complete and exclusive statement of the agreement between Adaptec and you, and
supersedes any proposal or prior agreement, oral or written, and any other communication
between Adaptec and you relating to the subject matter of this Agreement. No additional or
any different terms will be enforceable against Adaptec unless Adaptec gives its express
consent, including an express waiver of the terms of this Agreement, in writing signed by an
officer of Adaptec. You assume full responsibility for the use of the Software and agree to
use the Software legally and responsibly. This Agreement shall be governed by the internal
laws of the state of California, without regard to or application of its conflicts of laws
principles, except as to copyright matters, which are covered by Federal law. This
Agreement is deemed entered into at Milpitas, California by both parties. Should any
provision of this Agreement be declared unenforceable in any jurisdiction, then such
provision shall be deemed severable from this Agreement and shall not affect the remainder
hereof. All rights in the Software not specifically granted in this Agreement are reserved by
Adaptec.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Should you have any questions concerning this Agreement, you may contact Adaptec by
writing to:
Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035.
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. However, if this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
■
■
Consult the dealer or an experienced radio/ television technician for help.
Use a shielded and properly grounded I/ O cable and power cable to ensure compliance of
this unit to the specified limits of the rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Adaptec, Inc.
AVC-2210
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
European Union Compliance Statement
This Information Technology Equipment has been tested and found to comply with
EMC Directive 89/ 336/ EEC, as amended by 92/ 31/ EEC and 93/ 68/ EEC, in
accordance with:
■ EN55022 (1998) Emissions
■ EN55024 (1998) Immunity:
– EN61000-4-2 (1998) Electrostatic discharge: ±4 kV contact, ±8 kV air
– EN61000-4-3 (1998) Radiated immunity
– EN61000-4-4 (1995) Electrical fast transients/ burst: ±1 kV AC, ±0.5 kV I/ O
– EN61000-4-5 (1995) Surges ±1 kV differential mode, ±2 kV common mode
– EN61000-4-6 (1996) Conducted immunity: 3 V
– EN61000-4-11 (1994) Supply dips and variation: 30% and 100%
In addition, all equipment requiring U.L. listing has been found to comply with EMC
Directive 73/ 23/ EEC as amended by 93/ 68/ EEC in accordance with EN60950 with
amendments A1, A2, A3, A4, A11.
Australian/New Zealand Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to the Australian/ New Zealand standard AS/ NZS 3548 set out by
the Spectrum Management Agency.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
Japanese Compliance (Voluntary Control Council Initiative)
This equipment complies to class B Information Technology equipment based on
VCCI (Voluntary Control Council for Interface). This equipment is designed for home
use but it may causes radio frequency interference problem if used too near to a
television or radio. Please handle it correctly per this documentation.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
In this Guide
Introduction
What’s in the Package
System Requirements
This is Your AVC-2210
Installing the Drivers
Installing Sonic MyDVD
27
27
28
32
33
34
Creating A Video Project With MyDVD
Finding More Information
Registering Your AVC-2210
Need Help with Your AVC-2210?
Need Help Capturing Your Video?
Need Help Burning Your Video?
Technical Specifications
1
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Introduction
Congratulations on the purchase of your Adaptec VideOh!™ DVD
AVC-2210. With your VideOh! DVD kit, you can convert your
analog videos into digital format and create your own Video CDs
(VCDs) and DVDs.
■
Capture your favorite video footage with your AVC-2210 and
the Sonic® MyDVD® software.
■
■
Organize and burn VCDs and DVDs with MyDVD. Add
backgrounds to your videos, and menus for easy navigation.
Edit your videos with the digital video editing tool integrated
with MyDVD, if you want to add music, transitions, and titles
to your movies.
This User’s Guide tells you how to set up your VideOh! DVD
hardware, and provides detailed instructions for installing and
using the VideOh! DVD software.
DISCLAIMER: This product or software may be designed to assist you in reproducing materials in
which you own the copyright or have obtained permission to copy from the copyright owner.
Unless you own the copyright or have permission to copy from the copyright owner, you may
be violating copyright law and be subject to payment of damaged and other remedies. If you are
uncertain about your rights you should contact your legal advisor.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the Package
What’s in the Package
Your Adaptec VideOh! DVD package includes:
■
■
■
■
■
■
Adaptec AVC-2210 USB 2.0 MPEG-2 capture device
A stand for the Adaptec AVC-2210
6-foot USB cable
6-foot RCA to RCA Audio/ Video (A/ V) cable
External power adapter
VideOh! Installation CD, including drivers and Sonic MyDVD
software
■
VideOh! DVD AVC-2210 Getting Started printed guide
System Requirements
To use your VideOh! DVD kit, you need a PC-compatible computer
with:
■
■
Intel Pentium III 600 MHz (or faster) processor
Windows® 98SE, Windows Me®, Windows 2000®, or
Windows XP®
■
■
■
■
Available USB port (USB 2.0 recommended)
256 MB RAM
350 MB free disk space for applications
420 MB to 570 MB free disk space per 10 minutes of captured
video (depending on the video quality setting you choose)
See Need Help Capturing Your Video? on page 32 for more
information on video quality settings.
■
■
■
■
Sound card
CD-ROM drive
CD-Recorder or DVD-Recorder for output
Video card and monitor that support 16-bit color at 1024 x 768
resolution (24/ 32-bit color and higher resolution
recommended)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
This is Your AVC-2210
FRONT VIEW
Power button
Power LED
Audio Input ports
Video Input port
S-Video Input port
BACK VIEW
Power port
USB port
Stand
You can also take your AVC-2210 out of its stand and
lay it flat on your desk. Built-in rubber pads keep it in
place when it’s not in its stand.
Power LED Status
status of operation. The following table indicates the status modes.
LED Color
Off
Condition
-
Description
Device is off
Orange
Steady
Device is on, firmware is loading, also
indicates standby mode
Orange
Green
Green
Blinking
Steady
Error—for help, see Need Help with Your
AVC-2210? on page 28
Firmware succesfully loaded and ready for
use
Blinking
A/ V data is being transferred
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Plugging In Your AVC-2210
Plugging In Your AVC-2210
To set up your AVC-2210:
1
Connect the power adapter.
(See the figures on page 4 if you need help locating the ports on
your AVC-2210.)
2
Connect your video device to your AVC-2210 using the
included A/ V cable. Your device may have a proprietary cable.
Connect red audio plug to red
audio port and white audio
plug to white audio port
Connect yellow video plug to
yellow video input port
S-Video users only—Connect your S-Video cable (not included)
to your analog video device using the S-Video port on your
AVC-2210. You can use the audio plugs of the A/ V cable
included in your VideOh! DVD kit to connect to the Audio-L
and Audio-R ports.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
3
Turn on your computer if you haven’t already done so, then
connect the AVC-2210 to your computer using the provided
USB 2.0 cable.
4
5
Insert the VideOh! Installation CD into your CD-ROM drive.
Turn on the AVC-2210 by pressing the Power button. The LED
on the front of the AVC-2210 will light up orange when first
powered on.
Note: If the VideOh! DVD Software Installation screen
appears, exit this screen until driver installation is
complete.
Now you are ready to install the device drivers.
Installing the Drivers
DVD device drivers.
Installation is an easy two-step process. First you install the USB
loader, then you install the device driver. Follow the complete set
of installation instructions provided for your operating system to
ensure that the driver is properly installed :
■
■
■
■
For Windows XP, see page 7.
For Windows 2000, see page 10.
For Windows Me, see page 14.
For Windows 98SE, see page 16.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
Windows XP
Windows XP automatically detects your device and opens the
Found New Hardware Wizard. To perform the installation, follow
the instructions provided in this section.
Note: Before installing the driver, make sure the VideOh!
Installation CD is in your CD-ROM drive.
To install the driver:
1
In the Found New Hardware Wizard, select Install the software
automatically..., then click Next.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
2
If this window appears, click Continue Anyway.
Note: Adaptec drivers have been fully tested and certified
to work with the AVC-2210 device.
Windows installs the driver.
3
Click Finish to complete the USB Loader installation.
4
From the Found New Hardware Wizard, repeat steps 1 and 2 to
install the device drivers.
5
Click Finish to complete the installation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
6
Click Yes to restart your computer.
Note: If you plug your AVC-2210 into a USB 1.1 port, this
message appears during driver installation:
A hi-speed USB device is plugged into a non-hi-speed USB hub.
This message indicates that your AVC-2210 will run at a
performance, plug your AVC-2210 into a USB 2.0 port.
(For information on USB 2.0 adapters and hubs, go to the
Note: To check if the driver is installed properly, you can
follow the instructions provided in Need Help Installing Your
Device Drivers? on page 28.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Windows2000
Windows 2000 automatically detects your device and opens the
Found New Hardware Wizard. To perform the installation, follow
the instructions provided in this section.
Note: Before installing the driver, make sure the VideOh!
Installation CD is in your CD-ROM drive.
To install the drivers:
1
In the Found New Hardware Wizard, click Next.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
Select Search for a suitable driver..., then click Next.
2
3
Select only CD-ROM drives, then click Next.
Windows locates a driver file.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
4 Click Next.
Note: The drive letter for your CD-ROM may be different
than the one shown in the example above.
5
Click Finish to complete the USB Loader installation.
6
Repeat steps 2 through 4 to install the device drivers.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
7
If this window appears, click Yes.
Note: Adaptec drivers have been fully tested and certified
to work with the AVC-2210 device.
8
Click Finish to complete the installation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
9
When the installation is complete, restart your computer.
Note: To check if the driver is installed properly, you can
follow the instructions provided in Need Help Installing Your
Device Drivers? on page 28.
WindowsMe
Windows Me automatically detects your device and opens the
Found New Hardware Wizard. To perform the installation, follow
the instructions provided in this section.
Note: Before installing the driver, make sure the VideOh!
Installation CD is in your CD-ROM drive.
To install the driver:
1
In the Add New Hardware Wizard, click Next.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
2
Select Automatic search..., then click Next.
3
Click Finish to complete the USB Loader installation.
4
From the Add New Hardware Wizard, repeat Steps 1 through 3
to install the device drivers.
Note: To check if the driver is installed properly, you can
follow the instructions provided in Need Help Installing Your
Device Drivers? on page 28.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Windows 98SE
Windows 98SE automatically detects your device and opens the
Found New Hardware Wizard. To perform the installation, follow
the instructions provided in this section.
Note: Before installing the driver, make sure the VideOh!
Installation CD is in your CD-ROM drive.
Note: You may need your Windows 98SE CD to complete this
installation procedure.
To install the drivers:
1
In the Add New Hardware Wizard, click Next.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
2
Select Search for best driver..., then click Next.
3
Select only CD-ROM drive, then click Next.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
4
Click Next.
Note: The drive letter for your CD-ROM may be different
than the one shown in the example above.
5
Click Finish to complete the USB Loader installation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Drivers
6
In the Add New Hardware Wizard, click Next then follow steps
2 through 4 to install device drivers.
7
If required, insert your Windows 98SE CD, then click OK.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
8
Click Finish to complete the installation.
installation CD is older than the existing driver file, you may
get a version conflict message. Select to keep the newer driver
file.
Note: To check if the driver is installed properly, you can
follow the instructions provided in Need Help Installing Your
Device Drivers? on page 28.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Sonic MyDVD
Installing Sonic MyDVD
After you install your drivers, you need to install MyDVD. To
install MyDVD:
Note: If you have an older version of MyDVD already
installed on your system, you must uninstall it first before
insalling the newer version.
1
Insert the VideOh! CD into your CD-ROM drive. The VideOh!
Installation screen appears.
If the VideOh! CD Installation screen doesn’t appear, use
Windows Explorer to display the CD contents, then click
autorun.exe.
2
3
From the Main VideOh! Installation screen, click Install
Software, then click MyDVD.
Follow the on-screen instructions.
Note: Windows 98SE only—Before it begins the MyDVD and
Showbiz installation, your system may automatically
install an updated version of Windows Installer, then
prompt you to restart your computer. Follow the onscreen
instructions to continue the installation.
Sonic MyDVD and the ArcSoft® Showbiz™ companion software
will install on your system.
Creating A Video Project With MyDVD
These instructions give you the basic steps for capturing your
video, trimming it, and then burning it to DVD or CD.
To get more information, refer to the online tutorial included with
Sonic MyDVD. Or, at any time while you’re using this software,
click ? or Help, to display detailed information about any step you
want to perform.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Before you begin creating:
■
Make sure your analog video device (such as a camcorder or
VCR) is connected to the AVC-2210 and switched on.
■
If you have an external DVD/ CD recorder, make sure it is
connected to your computer and switched on. You need a
DVD-Recordable drive and appropriate media to burn DVDs.
DVD-ROM, CD-R, and CD-RW drives do not have the
capability to burn DVD discs. However, a CD-Recordable drive
can burn a Video CD that you can play back on most DVD
players.
Capture Your Video
To successfully capture your video, make sure you complete each
step in the order given.
1
Start MyDVD by clicking the Sonic MyDVD icon on your
desktop. The Welcome window appears.
Click here for more information
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating A Video Project With MyDVD
2
Move the mouse pointer over either DVD-Video or Video CD
(depending on what type of media you want), then click Create
or Modify a ... Project. The Main project window appears.
3
On the Main project window (shown in Step 2), click Capture.
The Capture window appears.
These buttons won’t operate your analog video device. Use the Play,
Stop, and other control buttons on your device to control your analog
video tape.
4
Press the Play button on your analog video device. The video
image appears in the Capture window (as shown in Step 3).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
5
To begin transferring your video to your computer, click Start
Capturing.
MyDVD captures your video, including the audio.
Note: If you get any error messages at this point in your
video capturing, stop your analog video device and refer
to Need Help Capturing Your Video? on page 32.
6
7
8
When you want to stop transferring your video to your
computer, click Stop Capturing, then stop or pause your analog
video device.
On the Save As screen, enter the filename of your video clip and
click Save. The filename you choose, becomes the title of your
video clip and is displayed on the Main project window.
Click Done when finished.
Your video clip is saved and you will see a thumbnail picture on
your Main project window.
The layout shown in the
MyDVD Main project
window is what your
DVD menu will look like
on your TV
Note: If you plan to do multiple video captures in the same
session, save your project, then close and relaunch
MyDVD every six captures (or sooner, if prompted by a
system resource message).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating A Video Project With MyDVD
Trim Your Video
Now that you’ve captured some video footage, you can trim it. For
example, you can change your Start and End points. You can also
choose the specific video frame that you want to use as the
thumbnail picture that is displayed in your Main project window.
1
From the Main project window, double-click the thumbnail for
the video clip you want to trim.
2
Use the controls in the Trimming window to trim your video.
You can trim
out unwanted
video footage
Drag the red
bracket to
choose an
Drag the thumb to choose a Thumbnail image
Drag the green bracket to choose a Start Frame
3
Click OK when finished.
Note: For more advanced editing functions, use the ArcSoft
Showbiz companion software included with MyDVD. For
more information, see Finding More Information on page 27.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Preview Your Project
It’s a good idea to see how your DVD/ VCD project will look before
you burn it to disc. To preview your project, press Preview at the
bottom of your Main project window, then double-click the
thumbnail clip you want to look at.
When you have previewed your project, press Stop.
■
If playback appears fuzzy and unclear (for example, the edges
of objects, especially objects in motion, are feathered) it is
because of a difference between how televisions and computer
monitors display video. This effect is not noticeable when you
play back the finished DVD or VCD disc on your TV.
■
If your computer’s processing speed is less than 800 MHz or if
you are using a slower video card, your preview video in the
MyDVD capture window may appear choppy. However, the
finished DVD or VCD, played back on your TV, will be fine.
Updating the drivers for your computer’s video and/ or audio
card may minimize this problem. Check your video or sound
card manufacturer’s Web site for driver updates.
Burn Your DVD or VCD
When you are satisfied with how your DVD or VCD project looks,
you are ready to burn it onto a recordable DVD or CD.
1
Insert a recordable DVD or CD into your computer’s DVD or
CD recorder.
2
3
On the Main project window, click Burn.
Follow the on-screen instructions.
You will be notified when your DVD or VCD is successfully
completed. On average, a 30 minute DVD or VCD can take from
1 to 2 hours to burn (depending on the speed of your computer
and burner).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharing Your DVD or VCD
Sharing Your DVD or VCD
Now that you’ve captured your video and burned it to a DVD or
CD, you’re ready to share it. You can play your newly created DVD
on most compatible DVD players and your VCD on most
compatible DVD players or CD-ROM drives.
You can play your DVDs the way you play any standard DVD,
using the controls on your DVD player or remote control.
To play a VCD, you need to select the video clip you want to view
by using the number pad on the video player remote control. If you
have more than 6 video clips, you can navigate between menu
screens by using the skip forward and back controls on your TV
remote control.
Finding More Information
To learn more about how to use Sonic MyDVD and ArcSoft
ShowBiz:
■
In the MyDVD Welcome window, click the Help button or
Tutorial button.
In the Main project window, click the Help menu and select
MyDVD Help or Tutorial.
■
In Showbiz, click on the question mark icon on the ShowBiz
Main screen to open the online Help and Learn the Basics
tutorial. Right-click on any screen item to open context-sensitive
Help.
Registering Your AVC-2210
To ensure your eligibility for support and upgrades, and to qualify
for future promotions, please register your AVC-2210 on the
Adaptec Web site at register.adaptec.com.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Need Help with Your AVC-2210?
Note: See the Readme file on the VideOh! Installation CD for
the latest information.
■
Ensure that your analog video device is connected and powered
on.
■
■
Double-check all cable connections.
Try connecting to a different USB port on your computer. In
doing so, you may need to reinstall the drivers.
■
■
■
If your AVC-2210 is connected to a USB hub, try connecting it
directly to your computer’s USB port. You may also need to
reinstall the drivers.
Ensure that the AVC-2210 is properly connected and that the
drivers are correctly installed. This will be indicated when the
green power LED on the AVC-2210 is solid on.
If the LED is blinking orange, save your work, close MyDVD,
then power your AVC-2210 off, then on again.
Need Help Installing Your Device Drivers?
To ensure that the driver for your operating system has installed
properly, you may want to double-check your driver installation.
For Windows XP:
1
2
On the bottom left of your desktop, click the Start button, and
double-click Control Panel. Click Perfomance and
Maintenance, then double-click System. The System Properties
window opens. Click the Hardware tab.
Open Device Manager.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Need Help Installing Your Device Drivers?
3
Click Sound, video and game controllers, and check that
Adaptec AVC-2210 USB Device appears, as shown in the following
figure.
Note: The screen you see on your computer may be
different than the one shown in the example above.
If the AVC-2210 doesn’t appear, refer to Need Help with Your
AVC-2210? on page 28.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
For Windows 2000:
1
On the bottom left of your desktop, click the Start button, select
Settings and click Control Panel, then double-click System.
The System Properties window opens. Click the Hardware tab.
2
3
Open Device Manager.
Click Sound, video and game controllers, and check that
Adaptec AVC-2210 USB Device appears, as shown in the following
figure.
Note: The screen you see on your computer may be
different than the one shown in the example above.
If the AVC-2210 doesn’t appear, refer to Need Help with Your
AVC-2210? on page 28.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Need Help Installing Your Device Drivers?
For Windows Me and 98SE:
1
On the bottom left of your desktop, click the Start button, select
Settings and click Control Panel, then double-click System.
The System Properties window opens.
2
3
Open Device Manager, and select View devices by type.
Click Sound, video and game controllers, and check that
Adaptec AVC-2210 USB Device appears, as shown in the following
figure.
Note: The screen you see on your computer may be
different than the one shown in the example above.
If the AVC-2210 doesn’t appear, refer to Need Help with Your
AVC-2210? on page 28.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Need Help Capturing Your Video?
■
If your analog video device, such as a VCR or camcorder, is not
powered on, after about 1 minute, you will get an error
message.
To allow MyDVD to recognize and capture the video:
a
b
c
d
Click OK to close the error message.
Click Done to close the Capture window.
Press the Power on button on your video device.
Click Capture.
■
For optimum quality when creating DVDs, use the Best setting
(in the MyDVD Capture window) when capturing video clips.
However, if you have limited disk space, Adaptec recommends
that you choose the Better or Good capture setting. Use this
table to estimate the amount of disk space required:
Disk space required for:
Quality / Resolution
Capture
Setting
1 minute of
analog video
10 minutes of
analog video
DVD (MPEG-II)
Good
Better
Best
42 MB
49 MB
57 MB
21 MB
420 MB
490 MB
570 MB
210 MB
VCD (MPEG-I)
Good
Note: Due to Microsoft Windows FAT file system
limitations, the maximum file size you can use is 4
Gigabytes (GB). If possible, use NTSF formatted hard disk.
■
If you are capturing video using the Best quality setting and see
choppy images on the preview window, make sure you’re
connected to a USB 2.0 port, because Best quality capturing may
exceed the bandwidth of USB 1.1.
■
MyDVD may not be able to recognize footage from a damaged
or degraded video tape.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Need Help Burning Your Video?
■
If there are large gaps in your analog video tape of about 5
minutes, MyDVD stops capturing. To continue, forward to a
new clip and start capturing. Gaps in video footage are often
caused by stops, pauses, static, or unrecorded space in the
deteriorated video tapes.
■
■
Set your computer monitor’s screen resolution to 1024 x 768 or
higher for optimum viewing.
If you are playing your video and it is not appearing on the
MyDVD Main project window, make sure MyDVD is capturing
from the correct device. To check your device, go to the Capture
Window (as shown in Step 3 of Capture Your Video) and under
Record Settings, click Change. Make sure Adaptec USB
Capture Device is selected.
■
To avoid choppy video in a captured file, especially a long video
clip, users should disable any background programs such as
virus software or any CPU-loaded software.
Need Help Burning Your Video?
■
In rare instances, while burning your video to DVD, an error
message may appear, such as bit rate too high. If this happens,
double-click the thumbnail in MyDVD’s Main project window.
Select the End Frame on the Trimming window and remove
about 5 to 10 seconds of video from the end. Close the
Trimming window, save the project and try again. If the
message persists, open the Trimming window again and check
the video for static. If the static exists on the video, trim back to
a point on the video where static does not exist.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VideOh! DVD AVC-2210 User’s Guide
Technical Specifications
Technology
USB 2.0
Video Capture Format
Bit Rate
MPEG-1 and MPEG-2
Constant bit rate (CBR)
Video Standards
NTSC format at 29.97fps:
Full D1: 720x480, MPEG1: 352x240
PAL format at 25fps:
Full D1: 720x576, MPEG1: 352x288
Audio Input
Video Input
Stereo Audio (Left/ Right RCA)
Composite (RCA)
S-Video Connector (7-pin DIN)
PC Interface
Power
USB 2.0 Connector
5 V Power Input (Power Jack)
External Power Supply
Regulatory
Certifications
FCC Class B, CE Class B
(See page vii for more information.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, CA 95035 USA
© 2003 Adaptec, Inc.
All rights reserved. Adaptec and the Adaptec logo
are trademarks of Adaptec, Inc. which may be
registered in some jurisdictions.
Part Number: 513543-06, Ver. AA, JG 04/03
Download from Www.Somanuals.com. All Manuals Search And Download.
|