LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of
defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF THIS
WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use
and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by
Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned
goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than
authorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS
ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM
ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS
ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE
OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES
ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS
AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN
WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
model# 13230
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
Patent numbers: 5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2
ACURITE® is a registered trademark of the Chaney Instrument Co.
Lake Geneva, WI
13230 INST 062911
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
PLACEMENT
Now that setup is complete, you must choose a location to place the wireless
sensor and the display unit. The wireless sensor MUST be placed less than 330
feet (100 meters) away from the display unit.
About the Self-Setting Clock
Your new wireless weather station is equipped with Intelli-Time® technology
which is pre-programmed with the correct time and date. Intelli-Time®
technology instructs the clock to self set itself once batteries are installed. All
you need to do is select your Time Zone and Daylight Saving Time preferences.
The clock will automatically set itself and change automatically for Daylight
Saving Time.
This wireless thermometer uses radio frequency for communication, which is
susceptible to interference from other electronic devices and large metallic
items or thick walls. Always place both units at least 3 feet (.91 m) away from
appliances ( TV, microwave, radios, etc. ) or objects that may interfere with
the wireless communication ( large metal surfaces, thick stone walls, etc. ).
Touch Buttons
Your new wireless weather station is equipped with touch sensitive buttons on
the front of the housing. These buttons require only a light touch to use.
Display Unit : Basic Setup
Touch and hold the “SET” button for 3 seconds to enter in to SET MODE.
Once in set mode, the preference you are currently setting will blink on the
display.
(330 feet maximum)
(100 meters)
To adjust the currently selected (flashing) preference item, touch the “ ”
or “ ” buttons. (touch and HOLD to fast adjust).
Placement of Display Unit
Place the display unit in a dry area free of dirt and dust. To help
ensure an accurate indoor temperature and humidity measurement,
be sure to place the display unit out of direct sunlight, and away
from any heat sources or vents in your home. There are 2 placement
options for the display unit. You may hang the main unit on a wall
using the integrated hang hole. Alternatively, you may place the
main unit on a table top or other flat surface using the the included
detachable table top display stand.
To save your adjustments, touch the “SET” button again to move on to
adjusting the next preference. The preference set order is as follows:
TME ZONE (PST MST CST EST AST HAS AKS)
DST (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE SCALE (ºF or ºC)
BAROMETRIC PRESSURE SCALE (inHg or hPa)
Placement of Sensor
The wireless sensor MUST BE PLACED OUTDOORS to observe
outdoor temperatures and humidity. The wireless sensor must be
placed less than 330 feet (100 m) from the display unit. The wireless
sensor is water resistant and is designed for general outdoor use.
However, to extend the life of the product, place the wireless sensor
in an area protected from direct weather elements.
You will automatically exit SET MODE if no buttons are touched for 30
seconds. You may enter basic setup mode again at any time by touching the
“SET” button.
To ensure an accurate outdoor temperature measurement, be sure
the wireless sensor is placed out of direct sunlight and away from any
heat sources.
Basic Setup is Now Complete
The wireless sensor will soon send a signal to the display unit and the two units
will be synchronzied. It may take a few minutes for synchronization to be
complete. If both or one of hte units appear to be functioning improperly, refer
to the troubleshooting section in this manual.
There are 2 placement options for the wireless sensor. You may hang it
using one of the two integrated hang holes, or use string (not included)
to hang it from a suitable location like a well covered tree branch.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
USE
USE
Pressure : Current and History
Daily High & Low
This weather station has a pressure
graph that tracks and displays the
barometric pressure 12 hours ago as
well as the current barometric pressure.
Additionally, the graph will
The daily high and low records are displayed for the indoor and outdoor
temperature and humidity. These records ar cleared automatically every
day at midnight.
automatically display the “FALLING”,
“STEADY” OR “RISING” icon and a
curve to represent the rate of change
over the previous 12 hour time period.
Wireless Signal Reception Icons
The display unit has a signal reception icon near the outdoor temperature
display area. If there are a low number of “bars” present, you may
experience no temperature display ( “- -” ) or inacurracy. In either case, you
may need to relocate one or both of the units. If most or all 4 of the bars are
present, wireless reception is good and no action is required.
Atmospheric Pressure
Atmospheric Pressure is defined as the pressure at any location on the
Earth, caused by the weight of the column of air above it. At sea level,
atmospheric pressure has an average value of one atmosphere and
gradually decreases as altitude increases. Also called barometric pressure.
Forecast Icon
This feature gives you the predicted weather forecast for the next 12 to 24
hours based on an advanced algorithm that includes barometric pressure
and temperature. This weather station will provide the most accurate
forecast that a single station weather instrument can provide.
The weight of the atmosphere that envelopes Earth exerts pressure on all
points of the planet's surface. Meteorologists use barometers to measure
this atmospheric pressure (also called barometric pressure). At sea level the
atmospheric pressure is approximately 1 kilogram per square centimeter
(14.7 pounds per square inch), which will cause a column of mercury in a
mercury barometer to rise 760 millimeters (30.4 inches). Variations in the
atmospheric pressure greatly affect the weather. Low pressure generally
brings rain. In areas of low air pressure, the air is less dense and relatively
warm, which causes it to rise. The expanding and rising air naturally cools,
and the water vapor in the air condenses, forming clouds and the drops
that fall as rain. In high pressure areas, the air is dense and relatively cool,
which causes it to sink. The water vapor in the sinking air doesnʼt condense,
resulting in clear skies.
14 Day Learning Mode
This weather station has a patented “fourteen day learning mode”
calibration process. During this learning mode the weather station will
make altitude calculations that may affect the accuracy of the forecast.
Once the 14 day learning mode process is complete, the learning mode
icon will disappear and the weather forecast should be ready for superior
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
TROUBLESHOOTING
Problem
USE
Minimum & Maximum Records
Possible Solution
The display unit features Minimum & Maximum records display
mode. The minimum and maximum values for indoor and outdoor
temperature and humidity are recorded and kept until midnight every
day, when the records are reset for the next day.
Relocate the main unit and/or the wireless
sensor. Both units must be within 330 feet
(100m) from each other. Make sure both
units are placed at least 3 feet (.91 m) from
other electronic appliances and devices that
may interfere with the wireless
Bad
Wireless Sensor
Reception
Minimum Records
To view the minimum records, touch the “adjust down” button (
communication (such as TVʼs, microwaves,
computers etc). NOTE: It may take up to 20
minutes for the main unit to re-synchronize
with the sensor when batteries are replaced.
Use lithium batteries in sensor when
)
located on the front of the display unit. The minimum recorded values
will display for about 8 seconds (note the “MIN” icon indicating
minimum records being displayed). To manually reset the records
no bars
temperature is below -4ºF (-20ºC).
being displayed, touch and hold the “adjust down” (
while viewing the records.
) button
If wireless reception is bad (no bars), see
“Bad Reception” section above. The wireless
ID setting on each unit must match for all
units to communicate properly. See “Set
Wireless ID” on the next page.
No Wireless Sensor Data
(no communication)
Maximum Records
no bars and flashing
“ -- ” data
To view the maximum records, touch the “adjust up” button (
located on the front of the display unit. The maximum recorded
values will display for about 8 seconds (note the “MAX” icon
)
Make certain that the batteries are installed
correctly.
indicating maximum records being displayed). To manually reset the
records being displayed, touch and hold the “adjust up” (
while viewing the records.
Display Console
Screen Not Working
) button
Batteries may need replacing
Momentary Backlight
The display unit features a momentary blue backlight for easy
night-time viewing. The touch button to activate the backlight is
located on the top portion of the display bezel. Touching the button
will give you about 5 seconds of illumination. Note that excessive use
of the backlight will reduce the battery life.
Please DO NOT return product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 M-F 7:00 A.M. to 7:00 P.M. (Central)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
TROUBLESHOOTING
SPECIFICATIONS
Product Facts
Set Wireless ID
Batteries: 5 x “AA” (not included)
This wireless thermometer
uses long range 433mhz
radio frequency for
communication.
Lithium Batteries Recommended in
Outdoor Sensor if temperatures are
below -4ºF
Measurement Ranges
Limited One
Year Warranty
Instructions &
Outdoor Temperature: -40ºF to 158ºF
In the event that you have
reception problems due to
interference, both the
display unit and the
wireless sensor have
a selectable wireless ID.
The ID switches are
-40ºC to 70ºC
Warranty Enclosed
Customer Care:
877-221-1252
Outdoor Humidity:
20% to 95%
Indoor Temperature: 32ºF to 122ºF
0ºC to 50ºC
Patent numbers: 5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2
ACURITE® is a registered trademark of the Chaney Instrument Co.
Lake Geneva, WI 53147
Indoor Humidity:
20% to 95%
located within the battery
compartments of the
display unit and the
wireless sensor.
Wireless Range: 330 ft / 100 m MAX
Depending on home construction materials
A B C
A B C
You may choose A, B or C;
but both the display unit
and the wireless sensor
ID's must match for
Both wireless ID’s
must match
successful synchronization.
PRODUCT REGISTRATION
SUPPORT
To receive product updates
and information,
Log on to
Product Registration
Download from Www.Somanuals.com. All Manuals Search And Download.
9
10
|