54 Mbps
Wireless Multiport
Print Server
Model #: 802PSG
User Manual
Ver 1.0
Solutions for the Digital Life™
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Congratulations on purchasing the Actiontec 54 Mbps Wireless Multiport Print
Server. This Print Server is a powerful and convenient network printing solution
connecting USB and parallel printer(s) to a wireless 802.11b/g network. The Print
Server has a 10/100Mbps auto-sensing port, allowing it to be connected to a 10Base-
T or 100Base-TX network without the need for a dedicated print server. The Print
Server also supports multiple servers and multiple protocols, providing the capabil-
ity to print from anywhere, from any computer, and from any application.
The Print Server supports TCP/IP and AppleTalk protocols. It also supports the
most common network operating systems and protocols, including Windows 98SE,
Me, 2000, and XP, and Macintosh OS X (10.2+).
Package Contents
Make sure the following items came in this package:
s Actiontec 54 Mbps Wireless Multiport Print Server
s Power Adapter
s Installation CD (includes this manual)
s Quick Start Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Features
s 10/100 Ethernet port
s Wireless 54 Mbps 802.11g compliant
s 64-bit, 128-bit WEP encryption and WPA-PSK support
s Wireless infrastructure and ad-hoc mode support
s Removable antenna
s Integrated wireless site survey tool
s Two USB 1.1 ports (2.0 compatible); 1 parallel port
s Internet Printing Protocol (IPP) support
s Windows-based printing support
s Mac OS X-based native printing support (PostScript® printers only)
System Requirements
s
IBM-compatible system with 200 Mhz Pentium, at least 64 MB of RAM, and
CD-ROM drive
s Ethernet network adapter
s Windows 98SE, Me, 2000, or XP
s
TCP/IP installed
s Parallel or USB printer
s Wireless router
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
Getting to Know the Print Server
This section contains a quick description of the Print Server’s external features.
Front Panel
The Print Server’s front panel features six lights (LEDs):
r
Printe
LAN
3
2
1
WLAN
PWR
PWR Light
The PWR (Power) light illuminates when the Print Server is powered on, and
remains off (or dark) when no power is present.
WLAN Light
The WLAN light illuminates when the Print Server is connected wirelessly.
Printer 1 Light
The Printer 1 light flashes when printing to the printer connected to the P1 (par-
allel) port of the Print Server.
Printer 2 Light
The Printer 2 light flashes when printing to the printer connected to the P2
(USB) port of the Print Server.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Printer 3 Light
The Printer 3 light flashes when printing to the printer connected to the P3
(USB) port on the rear panel of the Print Server.
LAN Light
The LAN light illuminates when the Print Server is connected via its LAN port.
Rear Panel
The Print Server’s rear panel contains five ports (12VDC [Power], P3 [USB], P2
[USB], P1 [Parallel], and LAN), as well as a Reset button.
LAN
P1
P2
P3
Reset
A
12VDC 0.
Power Port
The Power port (marked “12VDC”) is used to connect the Print Server to an
electrical wall outlet via the Power adapter.
P2, P3 Ports
The P2 and P3 ports are USB ports used to connect a USB printer to the Print
Server.
P1 Port
The P1 port is a parallel port used to connect a parallel printer to the Print
Server.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
LAN Port
The LAN port is used to connect the Print Server to a computer via Ethernet
cable.
Reset Button
The Reset button is used to restore the Print Server’s factory default settings. To
do this, press the Reset button for 15 seconds.
Technical Support
Actiontec Electronics prides itself on making durable, high-quality, high-perfor-
mance products. If you need assistance, the Actiontec Technical Support Department
is available all day every day to provide professional support.
Actiontec Electronics, Inc.
760 N. Mary Avenue
Sunnyvale, CA 94085
Technical Support
Phone: (USA) 1-888-436-0657
Internet: www.actiontec.com/support
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the
Print Server
2
This chapter explains how to set up the Print Server. There are four parts involved:
Connecting the Print Server, Configuring the Print Server, Configuring the
Printer’s Settings, and Connecting the Printer.
Connecting the Print Server
To connect the Print Server to a computer:
1. Remove the Print Server from the package.
2. Insert one end of an Ethernet cable in the “LAN” port of the Print Server, and
the other end in an Ethernet port on the back of the computer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
3. Plug the large end of the Power cord into an electrical wall outlet, and the
smaller end in the Power (marked “12VDC”) on the back of the Print Server.
4. Make sure the Power and LAN lights on the front panel of the Print Server are
blinking or glowing steadily.
The Print Server is connected to a computer. Next, go to “Configuring the Print
Server,” below.
Configuring the Print Server
To configure the Print Server:
1. Insert the Installation CD in the CD-ROM drive of the computer. When the
window shown below appears, click Install Print Server Manager.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Setting Up the Print Server
2. The “Welcome to the Actiontec Print Server” window appears. Click Next.
3. The “Choose Destination Location” window appears. Click Next.
4. The “Select Components” window appears. Click Next.
5. The “Select Program Folder” window appears. Click Next.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
6. The “Print server list” window appears, and the Setup program locates the
Print Server. If the Print Server does not appear in the “Choose Print Server”
list box, make sure it is connected properly, then click Refresh. When the
Print Server is located, click Next.
7. The “Name the print server” window appears. Enter a name for the Print
Server in the “Alias Name” text box, then click Next.
8. The “Network protocol configuration” window appears. If needed, change any
of the network settings. However, Actiontec recommends leaving the TCP/IP
settings unchanged. Click Next.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Setting Up the Print Server
9. The “Add network port” window appears. Click Finish.
10. When the “Setup Complete” window appears, click Finish.
11. Close all windows and restart the computer.
12. After the computer restarts, from the desktop, select Start, Programs,
Actiontec Print Server, and Print Server Configuration.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
13. When the next window appears, highlight the Print Server name from the list
on the left side and click Setup on the toolbar. Then, double-click Wireless.
14. The “Login” window appears. Enter the username and password (default user-
name is “admin,” and default password is “1234”). Click OK.
15. The “Set Your Wireless Adapter Mode” window appears. Select Infrastructure
Mode by clicking in the appropriate circle, then click Next.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Setting Up the Print Server
16. When the “Connect To Your Wireless Network” window appears, select Scan
For Your local Wireless Network by clicking in the appropriate circle. Click
Next.
17. The “Wireless Network Name (SSID)” window appears. Select the name of the
wireless network to which the Print Server will connect. Click Next.
18. The “Wireless Security” window appears. Enter the security settings (if neces-
sary) needed to join the wireless network, then click Next.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
19. The “Configure Your Adapter’s IP Address” window appears. Make sure
“Automatically Obtain IP Settings (DHCP)” is active, then click Next.
20. The “Setup Status Summary” window appears. Make sure the settings are cor-
rect, then click Save.
21. In the popup window that appears, click Yes.
22. Back in the Actiontec Print Server Manager window, click Reboot in the toolbar.
After the computer restarts, the Print Server is connected and configured. Next, go
to “Configuring the Printer’s Settings” on the next page.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Setting Up the Print Server
Configuring the Printer’s Settings
To configure the printer’s settings:
1. After the computer restarts, from the desktop, select Start, Settings, Control
Panel, and Printers and Faxes. Right-click on the name of the printer and
from the menu that appears, select Properties.
2. In the “Printer Properties” window, select Ports. From the “Port” list, select the
PrintServer Network Port that corresponds to the Print Server port to which
the printer will be connected. In the example below, the “P3” port (one of the
Print Server’s USB ports) has been selected. Click Apply, then Close.
The printer is now configured properly. Next, go to “Connecting the Printer,” on
the next page.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Connecting the Printer
To connect the printer to the Print Server:
1. Unplug the Ethernet cable and Power cord from the Print Server.
2. Unplug the printer’s USB or parallel cable from the computer and insert it into
the Print Server port selected in step 2 of “Configuring the Printer’s Settings.”
3. Plug the Power cord back into the Power port of the Print Server.
4. Make sure the Power and WLAN lights are blinking or glowing steadily.
The Print Server is now connected to a printer and wireless router, and configured
for use.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Print
Server Manager
3
This chapter explains using the Print Server Manager, which allows the user to
manage and further configure the Print Server.
Accessing the Print Server Manager
To access the Print Server Manager, from the desktop, select Start, Programs,
Actiontec Print Server, and Print Server Configuration.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Doing so will generate the “Print Server Manager” window, as shown below.
In the left pane of the window is a graphical representation of the Print Server
and the printers connected to it. At the bottom of the screen is an event monitor,
which lists any actions performed while using the Print Server Manager. There are
a series of icons in the tool bar across the top of the window: Status, Setup, Wizard,
Report, Refresh, Reboot, and Search.
Status
To check the status of the Print Server, highlight it in the left pane, then click
Status. This generates the “Status” screen in upper right pane of the Print Server
Manager window, which displays information about the Print Server. None of
these settings can be changed from here.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
MAC ID
“MAC ID” displays the MAC (Media Access Control) address of the Print Server.
Model Type
“Model Type” displays the Print Server’s model number.
Version
Version displays the Print Server’s firmware version.
Print Port
To display the status of the Print Server’s ports, click the “+” icon next to “Print
Port.”
Netware
To display the status of the Print Server’s Netware connection, click the “+” icon
next to “Netware.” The connection’s “File Server Name,”“Polling Time,” and
“Attached Queue” status will be displayed.
TCP/IP
To display the status of the Print Server’s TCP/IP connection, click the “+” icon next
to “TCP/IP.” The Print Server’s “IP Address,”“Subnet Mask,”“Gateway,” and “DHCP
server” status will be displayed.
Apple Talk
To display the status of the Print Server’s Apple Talk connection, click the “+” icon
next to “Apple Talk.” The Print Server’s “Zone” and “Printer Type” status will be
displayed.
System
To display the status of the Print Server’s System, click the “+” icon next to
“System.” The Print Server’s “Raw Print,”“IPP Print,”“LPR Print,”“Apple Talk
Printing,”“Network Binary Printing,”“SMB.” and “SNMP” status will be displayed.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Setup
To make changes to the Print Server’s configuration, highlight it in the left pane,
then click Setup. This generates the “Setup” screen in upper right pane of the Print
Server Manager window, which displays various configuration options. Double-
click on one of the configuration icons to make changes.
General
Double-clicking the “General” icon in the Setup screen generates the “General”
window.
Device Info
The “Device Info” text box displays the Print Server’s “MAC ID” (MAC
address”), “Type” (model number), “Version” (firmware version), and “Port No.”
Print Server Name
The “Print Server Name” text box displays the Print Server’s network name. To
change the name, highlight the current name, then enter a different name.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
SMB Group Name
This is the name of the workgroup to which the Print Server belongs. To change,
highlight the current workgroup name, then enter a different one.
Set User Name/Password
To set a user name and password to allow access to the Print Server’s Web
Administrator tool (see chapter 4):
1. Activate “Set User Name/Password” by clicking in the appropriate check box.
2. Enter a user name in the “User Name” text box.
3. Enter a password in the “Password” text box.
4. Re-enter the password in the “Retype Password” text box.
5. Click Save.
Save/Cancel
After making changes in the General window, click Save to save them. Click
Cancel to discard any changes made.
TCP/IP
Double-clicking the “TCP/IP” icon in the Setup screen generates the “TCP/IP” win-
dow. There are two configurations in this window:
IP:
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
DHCP Server:
This window allows the user to configure the Print Server to automatically get
its IP address from the network’s DHCP server, or manually specify a static print
server IP address. The Print Server also has a built-in DHCP server that manages
the Print Server IP addresses.
IP
Select IP to change the Print Server’s IP address settings. To configure the print
server to automatically get an IP address from the network’s DHCP server, acti-
vate “Auto IP.” To manual assign an IP address, activate “Specify IP” then enter
“IP Address,”“Subnet Mask,” and “Gateway” addresses for the Print Server.
DHCP Server
Select DHCP Server to change the Print Server’s DHCP settings. Activate
“Enable” or “Disable” to start up or turn off the the Print Server’s DHCP server
(Disable is activated by default). If enabling the DHCP server, enter a “Start
Address,”“End Address,”“Gateway,” and “DNS.” The Print Server will then
assign a unique IP address (within the defined subnet) for each client.
Save/Cancel
After making changes in the TCP/IP window, click Save to save them. Click
Cancel to discard any changes made.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
Netware
Double-clicking the “Netware” icon in the Setup screen generates the “Netware”
window.
Polling Time
Enter the Print Server’s polling time here. Polling time is the time the Print
Server waits before printing jobs on the Netware server.
Queue Serviced by Printer
Enter the name of the Netware printer queue here. This queue keep all printing
jobs waiting on the Netware server.
Netware Server
If applicable, enter the Netware server here. This file server provides the printer
queues.
Save/Cancel
After making changes in the Netware window, click Save to save them. Click
Cancel to discard any changes made.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Apple Talk
Double-clicking the “Apple Talk” icon in the Setup screen generates the “Apple
Talk” window. AppleTalk is a data communication protocol used by Macintosh
computers. The Print Server uses this protocol to join the AppleTalk network and
share printers with Macintosh computers.
Zone Name
Enter the Print Server’s AppleTalk zone name in the “Zone Name” text box. The
zone name entered must be active before other computers in the same zone can
share printers using the Print Server. Only computers in the same zone as the
Print Server can share printers. Enter “*” in the Zone Name text box allows all
AppleTalk users in all zones to share printers through the Print Server.
Printer Type
Enter the printer type of each printer connected to the Print Server. See the
printer’s documentation for information concerning printer type.
Save/Cancel
After making changes in the AppleTalk window, click Save to save them. Click
Cancel to discard any changes made.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
System
Double-clicking the“System”icon in the Setup screen generates the“System”window.
Printing Protocols
At the top of the “System” window is a list of printing protocols the Print Server
can use. Activate a protocol by clicking in the appropriate check box.
Port Name
The name of the Print Server’s three ports can be changed here. Enter a new
name in the appropriate text box to change.
Upgrade Firmware
To find the appropriate upgrade file, click …, then browse for the file. When the
file is located, click Upgrade to upgrade the Print Server’s firmware.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Wireless Function
Here, the wireless capabilities of the Print Server can be enabled or disabled
manually (by clicking in the appropriate circle). Since the Print Server cannot
operate both wirelessly and through an Ethernet network simultaneously, when
the Print Server is first powered up, it automatically detects whether it is con-
nected to an Ethernet network. If so, it will run in wired mode, with the wire-
less mode disabled. If no Ethernet network is detected, the Print Server enables
wireless mode and disables wired mode. Activating “Auto” (the default selection)
allows the Print Server to automatically enable or disable wireless mode.
Save/Cancel
After making changes in the System window, click Save to save them. Click
Cancel to discard any changes made.
Wireless
Double-clicking the “Wireless” icon in the Setup screen generates the first
“Wireless” window.
To set up the Print Server for wireless operation:
1. In the first “Wireless” window, activate either “Infrastructure Mode” or
“AdHoc Mode.” Infrastructure Mode should be used if connecting to an
already existing wireless network. Activate Ad Hoc Mode to create a peer-to-
peer wireless network. After selecting one of the options, click Next.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
2. The next window appears. Select one of the methods to connect the Print
Server to the wireless network: “Scan for your local Wireless Network” or
“Assign Your Wireless Network Manually.”
Scan for your local Wireless Network
Selecting this option generates another window, which lists the available wire-
less networks. Highlight the desired wireless network from the list, then click
Next to connect.
Assign Your Wireless Network Manually
Selecting this option allows the user to manually select the wireless network.
To do this, activate “Assign Your Wireless Network Manually” by clicking in
the appropriate circle, then enter the SSID of the wireless network in the text
box. Click Next.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
3. The next window appears. Select the type of security used with the wireless net-
work from the menu list (generated by clicking on the down arrow next to the
“Security Mode”text box): Disable, WEP ASCII, WEP HEX, or WPA - shared key.
Disable
Selecting this option disables the wireless security on the Print Server. After
selecting, click Next.
WEP ASCII
Selecting this option generates the “Wireless Security (WEP)” window. Here, the
Print Server can be configured with 64- or 128-bit WEP security.
64-bit WEP - To create a set of 64-bit WEP ASCII keys, activate one or more
keys by clicking in the appropriate circles, then enter five standard characters
(numbers or letters) in each activated Key text box (Key 1-, Key 2-, Key 3-, Key
4-). After activating 64-bit WEP on the Print Server, a computer with wireless
capability can use the Print Sever only if these same keys are entered in the
computer’s wireless encryption scheme.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
128-bit WEP - To create a set of 128-bit WEP ASCII keys, activate one or more
keys by clicking in the appropriate circles, then enter 13 standard characters
(numbers or letters) in each activated Key text box (Key 1-, Key 2-, Key 3-, Key
4-). After activating 128-bit WEP on the Print Server, a computer with wireless
capability can use the Print Sever only if these same keys are entered in the
computer’s wireless encryption scheme.
After configuring, click Next.
WEP HEX
Selecting this option generates the same “Wireless Security (WEP)” window
as selecting WEP ASCII, except that the “Passphrase” text box is active and the
“Key” text boxes are already filled.
64-bit WEP - 64-bit WEP requires one or more keys, each key comprising five
hexadecimal pairs. A hexadecimal digit consists of an alphanumeric character
ranging from 0-9 or A-F. An example of a 64-bit WEP key is: 4E-A3-3D-68-72.
To create a set of 64-bit WEP HEX keys, activate one or more keys by clicking in
the appropriate circles, then enter five hexadecimal digit pairs in each activated
Key text box (Key 1-, Key 2-, Key 3-, Key 4-). After activating 64-bit WEP on the
Print Server, a computer with wireless capability can use the Print Sever only if
these same keys are entered in the computer’s wireless encryption scheme.
128-bit WEP - 128-bit WEP requires one or more keys, comprising 13 hexadecimal
pairs.A hexadecimal digit consists of alphanumeric characters ranging from 0-9 or
A-F.An example of a 128-bit WEP key is: 3D-44-FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1.
To create a 128-bit WEP key, activate Key 1 by clicking in the appropriate circle, then
enter 13 hexadecimal digit pairs in the Key text box.After activating 128-bit WEP on
the Print Server, a computer with wireless capability can use the Print Sever only if
this key is entered in the computer’s wireless encryption scheme.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Passphrase - Instead of entering hexadecimal keys, a Passphrase can be entered
in the “Passphrase” text box. This passphrase will then be used by the Print
Server to create hexadecimal keys. Other users must be able to run WEP HEX
Passphrase on their computers, and know the passphrase, to connect to the
Print Server.
WPA - shared key
Selecting this option generates the “Wireless Security (WEP)” window with the
“WPA Algorithms” and “Shared Key” text boxes. To use, enter an alphanumeric
word (from 8 to 63 characters in length) in the “Shared Key” text box. Other
users must be able to use WPA shared key on the their computers, and know
the shared key, to connect to the Print Server.
After selecting, click Next.
4. The next window allows the user to configure the Print Server to automati-
cally get its IP address from the network’s DHCP server, or manually specify
a static IP address. To configure the Print Server to automatically get an IP
address from the network’s DHCP server, activate “Automatically Obtain
IP Settings (DHCP).” To manual assign an IP address, activate “Set Your IP
Manually” then enter “IP Address,”“Subnet Mask,” and “Gateway” addresses
for the Print Server.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
After selecting, click Next.
5. The final window displays a summary of the Print Server’s wireless settings. If
changes were made, make sure they’re correct, then click Save.
SNMP
Double-clicking the“SNMP”icon in the Setup screen generates the“SNMP”(Simple
Network Management Protocol) window.
Contact
Enter the name of the technician managing the Print Server here. This name will
appear in SNMP monitoring tools.
Location
Enter the location of the Print Server here. This location will appear in SNMP
monitoring tools.
Save/Cancel
After making changes in the SNMP window, click Save to save them. Click
Cancel to discard any changes made.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Wizard
Clicking on the “Wizard” icon in the toolbar of the Print Server Manager window
generates the Wizard pane, as shown below.
The Setup Wizard can be used to do a quick reconfiguration of the Print Server. To
run the Wizard, click on the “Print Server Setup Wizard” icon, which generates the
first Wizard windows, as shown below:
1. The first Wizard window is “General Settings.” From here, the Print Server,
SMB Group, and Port names can be changed, as well as manually enabling
or disabling the Wireless function. The Wireless function can also be set to
“Auto.” When finished, click Next.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
2. The next window is “System Settings.” Enable or disable the Print Server’s
various printer protocols from here. When finished, click Next.
3. The next window is “TCP/IP Settings” From this window, the Print Server’s
IP address can be changed, and a DHCP server activated. When finished, click
Next.
4. The next window is “Netware Settings.” Configure the settings for the Netware
network from here. When finished, click Next.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
5. The next window is “Set Your Wireless Adapter Mode.” Select Infrastructure
or Ad Hoc, depending on what kind of wireless network the Print server is
connecting to. When finished, click Next.
6. The next window is “Connect to Your Wireless Network.” Select whether to
scan for an existing wireless network, or join a particular one by entering
its name in the text box. If “Scan For Your Wireless Network” was selected,
another window, showing the available wireless networks, will appear. Select
one, the click Next.
7. The next window is “Wireless Security (WEP).” Configure the wireless security
settings from here. When finished, click Next.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Using the Print Server Manager
8. The last Wizard window is “Setup Status Summary.” This window displays all
of the Print Server’s settings, after any changes made in the previous windows.
To save the settings, click Save. To make additional changes, click Back to get
to the window with the setting to be changed.
Report
Clicking the “Report” icon in the Print Server Manager” window generates the
“Report” window. This window displays various information about the Print Server.
Refresh
Clicking the “Refresh” icon in the Print Server Manager window refreshes the
information about the Print Server.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Reboot
Clicking the “Reboot” icon in the Print Server Manager window reboots the Print
Server.
Search
Clicking the “Search” icon allowws the user to search for other Print Servers on the
network.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Web
Administrator
4
This chapter explains how to use the Print Server’s Web Adminstrator, which
allows the user to manage and configure the Print Server via a Web browser.
Accessing the Web Administrator
To access the Web Adminsitrator:
1. Open a Web browser. In the “Address” text box, type:
then press Enter on the keyboard.
2. A login window appears. Enter the user name and password in the appropri-
ate text boxes, then click OK.
Note: The default user name is “admin.” The default password is
“1234.”
☞
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
The Web Administrator appears.
There are three options at the top of the screen: Device Setup, Setup Wizard, and
System Tools.
Device Setup
The Web Administrator’s “Device Setup” screen, (shown above) displays the cur-
rent configuration of the Print Server. There are seven Device Setup options, listed
along the left side: System Printer, TCP/IP, SMB, SNMP, NetWare, and AppleTalk.
Click the option to generate an informational screen. None of the settings can be
changed from the Device Setup screens
System
The “System” screen (shown above) displays information about the Print Server.
Device Name
Displays the Print Server’s device name.
Printer Server Name
Displays the Print Server’s network name.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
Model Type
Displays the Print Server’s model type.
System Up Time
Displays the length of time the Print Server has been powered up. This value
resets when the Print Server is rebooted.
MAC Address
Displays the Print Server’s MAC address.
USB Port Number
Displays the number of the Print Server’s USB ports.
LPTPort Number
Displays the number of the Print Server’s LPT ports.
Wireless LAN Status
Displays the status of the Print Server’s wireless configuration.
Printing Protocols (Raw Printing, IPP Printing, etc.)
Displays whether the Print Server’s printing protocols are enabled or disabled.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Printer
Selecting “Printer” in the Device Setup screen generates the “Printer” screen, which
displays information about the printers connected to the Print Server.
For each printer connected to the Print Server, its manufacturer, model number,
supported printing languages, and current status is displayed.
TCP/IP
Selecting “TCP/IP” in the Device Setup screen generates the “TCP/IP” screen, which
displays information about the Print Server’s TCP/IP connection.
The screen displays the state of the Print Server’s DHCP/BOOTP and DHCP Server
connection, as well as its IP, subnet mask, and gateway addresses.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
SMB
Selecting “SMB” in the Device Setup screen generates the “SMB” screen, which dis-
plays the Print Server’s SMB group name.
SNMP
Selecting “SNMP” in the Device Setup screen generates the “SNMP” screen, which
displays information about the Print Server’s SNMP connection, inlcuding system
contact and location.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
NetWare
Selecting “NetWare” in the Device Setup screen generates the “NetWare” screen,
which displays information about the Print Server’s NetWare connection, includ-
ing polling time, bindery mode state, file server name, and the port queues for all
three Print Server ports.
AppleTalk
Selecting “AppleTalk” in the Device Setup screen generates the “AppleTalk” screen,
which displays information about the Print Server’s AppleTalk connection, includ-
ing zone name, and the printer type for all printers connected to the Print Server.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
Setup Wizard
Selecting “Setup Wizard” from the Web Administrator at the top of the screen gen-
erates the Setup Wizard. Use the following procedure to run the Wizard:
1. The first Wizard screen appears. From here, the Print Server’s name and Port
names can be changed. When finished, click Save & Next.
2. In next Wizard screen the default user name and password can be changed.
Enter the new user name and password in the appropriate text boxes. When
finished, click Save & Next.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
3. In next Wizard screen, the Print Server’s printing protocols can be enabled
or disabled. For each protocol, select “Enabled” or “Disabled.” When finished,
click Save & Next.
4. In next Wizard screen, a list of available wireless networks is displayed. To
coneect to one, click the appropriate circle in the “Select” column and click
Submit. To refresh the list, click Refresh. When finished, click Next Page.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
5. In next Wizard screen, the wireless network settings are configured. Select
either “Infrastructure” or “AdHoc” from the “Mode” text menu. Infrastructure
should be used if connecting to an already existing wireless network. Select
Ad Hoc to create a peer-to-peer wireless network. Then enter the SSID and
Channel number of the wireless network in the appropriate text boxes. When
finished, click Save & Next.
6. In next Wizard screen, the wireless network security settings are configured.
From the “Encryption Mode” text box, select “Disabled,”“WEP,” or “WPA-
shared key,” depending on the type of encryption the wireless network is
using. If the network is not using encryption, select Disabled, click Save &
Next, and go to step 7. If WEP or WPA-shared key is selected, continue to the
next page.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
WEP
If WEP was selected, the “WEP” screen appears. If the wireless network the Print
Server is connected to is using WEP, enter the wireless network’s WEP settings
in this screen. When finished, click Save & Next.
WPA- shared key
If WPA-shared key was selected, the “WPA-shared key” screen appears. If the
wireless network the Print Server is connected to is using WPA, enter the wire-
less network’s WPA settings in this screen. When finished, click Save & Next.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
7. In next Wizard screen, the user can configure the Print Server to automatically
get its IP address from the network’s DHCP server, or manually specify a static
IP address. To configure the Print Server to automatically get an IP address
from the network’s DHCP server, activate “Enable Obtain TCP/IP settings
automatically.” To manual assign an IP address, activate “Disable Use the fol-
lowing TCP/IP settings” then enter “IP Address,”“Subnet Mask,” and “Gateway”
addresses for the Print Server. Also, the Print Server’s DHCP server can be
enabled or disabled from this screen. When finished, click Save & Next.
8. In next Wizard screen, the SMB settings of the Print Server can be changed.
When finished, click Save & Next.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
9. In next Wizard screen, the SNMP settings of the Print Server can be changed.
When finished, click Save & Next.
10. In next Wizard screen, the NetWare settings of the Print Server can be
changed. When finished, click Save & Next.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
11. In next Wizard screen, the AppleTalk settings of the Print Server can be
changed. When finished, click Save & Next.
12. In next Wizard screen, click Restart to save all changes made in the Wizard.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
System Tools
Selecting System Tools from the Web Administrator at the top of the screen gen-
erates the “System Tools” window. There are three options in the System Tools
screen: Load Default, Upgrade from Browser, and Backup Setting.
Load Default
Selecting Load Default from the menu of the left side of the System Tools screen
generates the “Load Default” screen (see above). Here, the factory default settings
of the Print Server can be reloaded. Click OK to reload the factory default settings.
Upgrade from Browser
Selecting Upgrade from Browser from the menu of the left side of the System
Tools screen generates the “Upgrade from Browser” screen.
To upgrade the firmware of the Print server, click Browse. Find the upgrade file
and select it. When it appears in the text box in the Upgrade from Browser win-
dow, click OK. The Print Server’s firmware is upgraded.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Web Administrator
Backup Setting
Selecting Backup Setting from the menu of the left side of the System Tools screen
generates the Backup Setting screen.
To backup the current settings of the Print server, click in the circle next to
“Backup settings from Print Server,” then click OK and save the file on the hard
drive. To restore a particular group of settings on the Print Server, click in the circle
next to “Restore settings from file” and browse for the settings file. Select the file,
then click OK. The settings will be loaded onto the “Print Server.”
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing Printers
From the Network
5
This chapter explains how to access the printers connected to the Print Server from
another computer on the network:
1. Make sure the drivers corresponding to the printer are installed on the com-
puter.
2. Insert the Installation CD in the CD-ROM drive of the computer. When the
window shown below appears, click Install Print Server Client Only.
3. The “Welcome” window appears. Click Next.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
4. The “Choose Destination Location” window appears. Click Next.
5. The “Select Program Folder” window appears. Click Next.
6. The “Add Port” window appears. Click Continue.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Accessing Printers From the Network
7. The “Installation Complete” window appears. Click Finish to finish the instal-
lation of the software.
8. Select “Network Ports Quick Setup” from the “Actiontec Print Server” direc-
tory in the “Programs” folder of the computer.
9. The “Network Ports Quick Setup” window appears. To select a printer, high-
light it in the “Available Port” text box, then click the > button. Once the
printer is listed in the “Chosen Ports” text box, click OK. The printer is now
accessible from this computer and ready to print.
Repeat this procedure to use printers connected to the Print Server from other
computers on the network.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
This chapter contains a list of problems that may be encountered while using the
Print Server, and solutions to these problems. Note that the solution may not solve
the problem.
The Printer Server Utility does not detect the Print Server
Close down the Utility and restart it.
While saving settings, a “Save Timed Out” error occurs.
Close down the Utility and restart it.
Printer prints strange or nonsensical characters.
First, clear the printer’s queue from the Print Manager (Start, Control Panel,
Printer). If the problem persists, power cycle the printer and the Print Server.
Computer is printing to the wrong printer.
Make sure the print port selected is the correct printer port in the Print Server
Manager. If the problem persists, power cycle the printer and Print Server.
Note: To view a list of frequently asked questions regarding the
Print Server, go to the Actiontec Support Web site.
☞
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
a
Model Number
802PSG (Actiontec 54 Mbps Wireless Multiport Print Server)
Ports
Two USB 1.1 (2.0 compatible), 1 Parallel
Network Interface
10/100 (Auto MDIX); 802.11g Wireless LAN
Wireless Security
64-, 128-bit WEP; WPA-PSK
Standards
IEEE 802.11g; 802.11b; 802.3; USB 1.1; IEEE 1284
Protocols
TCP/IP; IPP; DHCP; LPR; RAW; SMB; AppleTalk
Power Input
12VDC 1A Linear
Memory
2 MB Flash; 16 MB SDRAM
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Certification
FCC Part 15
LED Indicators
PWR, WLAN, Printer 1, Printer 2, Printer 3, LAN
Dimensions (LxWxH)
7.5 x 4.5 x 1.2 in.
Weight
.13 lbs.
Operating temperature
0° - 55° C (32° - 131° F)
Relative Humidity
> 80 % (non-condensing)
Limited Warranty
1 year
Note: Specifications are subject to change without notice.
☞
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Internet
b
Printer Protocol
This appendix explains how to use Internet Printer Protocol (IPP) to access the
Print Server using Internet Protocol (IP). Using this method, the printers con-
nected to the Print Server can be accessed by users over the Internet, provided they
know the printer model, printer port, and IP address of the Print Server.
Setting Up the Print Server
It is not necessary to modify the Print Server’s settings to implement IPP. The user
should be familiar with the Print Server’s IPP settings, making sure they are cor-
rectly set to the network’s IP settings. If unaware of the network’s routed IP settings,
contact the system administrator. To share the Print Server with Internet users
outside the local area network (LAN), the Print Server must be configured with an
outside IP address and if a gateway, router, or firewall is installed, that these devices
do not block the IPP. Contact the system administrator or consult the gateway or
router user manual for more information about DMZ or port mapping configura-
tion settings.
Accessing the Print Server via IPP
If the Print Server is properly configured using IPP, accessing a printer connected
to it over the Internet is done using the standard “Add New Printer” procedure:
1. From the computer’s desktop, select Start, then Control Panel.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
2. In the “Control Panel” window, double-click on the Printers icon.
3. In the “Printer” window, double-click Add Printer.
4. The first “Add Printer Wizard” window appears. Click Next.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix b Using Internet Printer Protocol
5. In the next window, select “A network printer, or a printer attached to another
computer” by clicking in the appropriate circle, then click Next.
6. In the next window, select “Connect to a printer on the Internet or on a home
or office network” by clicking in the appropriate circle, then enter the URL of
the Print Server and printer in the “URL” text box. The format of the URL is
example below, the Print Server IP address is “192.168.2.1,” and the printer
port number (the Print Server port to which the printer is connected) is “p1.”
Click Next.
7. Complete the Add Printer Wizard in the usual fashion.
The Print Server is now accessible via the Internet.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This page left intentionally blank.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
c
Access Point
A device that allows wireless clients to connect to one another. An access point
can also act as a bridge between wireless clients and a “wired” network, such as
an Ethernet network. Wireless clients can be moved anywhere within the cover-
age area of the access point and remain connected to the network. If connected
to an Ethernet network, the access point monitors Ethernet traffic and forwards
appropriate Ethernet messages to the wireless network, while also monitoring
wireless traffic and forwarding wireless client messages to the Ethernet network.
ATM (Asynchronous Transfer Mode)
A networking technology based on transferring data in fixed-size packets
Client
A desktop or mobile computer connected to a network.
DHCP (Dynamic Host Configuration Protocol)
A protocol designed to automatically assign an IP address to every computer on
your network.
DNS (Domain Name System) Server Address
Allows Internet host computers to have a domain name and one or more IP
addresses. A DNS server keeps a database of host computers and their respective
domain names and IP addresses so that when a user enters a domain name into
a Web browser, the user is sent to the proper IP address. The DNS server address
used by computers on the home network corresponds to the location of the DNS
server the ISP has assigned.
DSL (Digital Subscriber Line) Modem
A modem that uses existing phone lines to transmit data at high speeds.
Encryption
A method to allow wireless data transmissions a level of security.
ESSID (Extended Service Set Identifier)
A unique identifier for a wireless network. Also known as “SSID.”
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Ethernet Network
A standard wired networking configuration using cables and hubs.
Firewall
A method preventing users outside the network from accessing and/or damag-
ing files or computers on the network.
Gateway
A central device that manages the data traffic of your network, as well as data
traffic to and from the Internet.
IP (Internet Protocol) Address
A series of four numbers separated by periods identifying a unique Internet
computer host.
ISP Gateway Address
An IP address for the Internet router. This address is only required when using a
cable or DSL modem.
ISP (Internet Service Provider)
A business that allows individuals or businesses to connect to the Internet.
LAN (Local Area Network)
A group of computers and devices connected together in a relatively small area
(such as a house or an office). A home network is considered a LAN.
MAC (Media Access Control) Address
The hardware address of a device connected to a network.
NAT (Network Address Translation)
A method allowing all of the computers on a home network to use one IP
address, enabling access to the Internet from any computer on the home net-
work without having to purchase more IP addresses from the ISP.
PC Card
An adapter that inserts in the PCMCIA slot of a computer, enabling the commu-
nication with a device.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix c Glossary
PPPoE (Point-To-Point Protocol over Ethernet)/
PPPoA (Point-To-Point Protocol over ATM)
Methods of secure data transmission.
Router
A central device that manages the data traffic of your network.
Subnet Mask
A set of four numbers configured like an IP address used to create IP address
numbers used only within a particular network.
SSID
See “ESSID.”
TCP/IP (Transmission Control Protocol/Internet Protocol)
The standard protocol for data transmission over the Internet.
WAN (Wide Area Network)
A network that connects computers located in separate areas, (i.e., different
buildings, cities, countries). The Internet is a WAN.
WECA (Wireless Ethernet Compatibility Alliance)
An industry group that certifies cross-vender interoperability and compatibility
of IEEE 802.11b wireless networking products and promotes the standard for
enterprise, small business, and home environments.
WLAN (Wireless Local Area Network)
A group of computers and other devices connected wirelessly in a small area.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by implementing one or more of the following measures:
s Reorient or relocate the receiving antenna;
s Increase the separation between the equipment and receiver;
s Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected;
s Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Actiontec Electronics, Inc., may
void the user’s authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo – United States
only.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that
may cause unwanted operation
Note: To comply with FCC RF exposure compliance require-
☞
ments, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with
any other antenna or transmitter.
For questions regarding your product or the FCC declaration, contact:
Actiontec Electronics, Inc.
760 North Mary Ave.
Sunnyvale, CA 94086
United States
Tel: (408) 752-7700
Fax: (408) 541-9005
Miscellaneous Legal Notices
© 2005 Actiontec Electronics, Inc. Actiontec Installation Buddy, Connection 1-2-3,
Solutions for the Digital Life, Actiontec Digital Gear, and the Actiontec logo are
trademarks or registered trademarks of Actiontec Electronics, Inc.
All other names are the property of their respective owners.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Hardware: Actiontec Electronics, Inc., warrants to the end user (“Customer”) that
this hardware product will be free from defects in workmanship and materials,
under normal use and service, for twelve (12) months from the date of purchase
from Actiontec Electronics or its authorized reseller.
Actiontec Electronics’ sole obligation under this express warranty shall be, at
Actiontec’s option and expense, to repair the defective product or part, deliver to
Customer an equivalent product or part to replace the defective item, or if neither
of the two foregoing options is reasonably available, Actiontec Electronics may,
in its sole discretion, refund to Customer the purchase price paid for the defec-
tive product. All products that are replaced will become the property of Actiontec
Electronics, Inc. Replacement products may be new or reconditioned. Actiontec
Electronics warrants any replaced or repaired product or part for ninety (90) days
from shipment, or the remainder of the initial warranty period, whichever is longer.
Software: Actiontec Electronics warrants to Customer that each software program
licensed from it will perform in substantial conformance to its program specifica-
tions, for a period of ninety (90) days from the date of purchase from Actiontec
Electronics or its authorized reseller. Actiontec Electronics warrants the media con-
taining software against failure during the warranty period. The only updates that
will be provided are at the sole discretion of Actiontec Electronics and will only be
Electronics’ sole obligation under this express warranty shall be, at Actiontec
Electronics’ option and expense, to refund the purchase price paid by Customer
for any defective software product, or to replace any defective media with software
which substantially conforms to applicable Actiontec Electronics published specifi-
cations. Customer assumes responsibility for the selection of the appropriate appli-
cations program and associated reference materials. Actiontec Electronics makes
no warranty or representation that its software products will meet Customer’s
requirements or work in combination with any hardware or applications software
products provided by third parties, that the operation of the software products
will be uninterrupted or error free, or that all defects in the software products
will be corrected. For any third-party products listed in the Actiontec Electronics
software product documentation or specifications as being compatible, Actiontec
Electronics will make reasonable efforts to provide compatibility, except where
the non-compatibility is caused by a “bug” or defect in the third party’s product
or from use of the software product not in accordance with Actiontec Electronics
published specifications or user guide.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BE BUNDLED
WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A
SEPARATE END-USER LICENSE AGREEMENT.
THIS ACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRD-
PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE
END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE.
Obtaining Warranty Service: Customer may contact Actiontec Electronics
Technical Support Center within the applicable warranty period to obtain war-
ranty service authorization. Dated proof of purchase from Actiontec Electronics or
its authorized reseller may be required. Products returned to Actiontec Electronics
must be pre-authorized by Actiontec Electronics with a Return Merchandise
Authorization (RMA) number marked on the outside of the package, and sent
prepaid and packaged appropriately for safe shipment, and it is recommended that
they be insured or sent by a method that provides for tracking of the package. The
repaired or replaced item will be shipped to Customer, at Actiontec Electronics’
expense, not later than thirty (30) days after Actiontec Electronics receives the
defective product.
Return the product to:
(In the United States)
Actiontec Electronics, Inc.
760 North Mary Avenue
Sunnyvale, CA 94085
Actiontec Electronics shall not be responsible for any software, firmware, informa-
tion, memory data, or Customer data contained in, stored on, or integrated with
any products returned to Actiontec Electronics for repair, whether under warranty
or not.
WARRANTIES EXCLUSIVE: IF AN ACTIONTEC ELECTRONICS PRODUCT DOES
NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR
BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT ACTIONTEC ELECTRONICS’ OPTION. TO
THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, TERMS OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS OR CONDITIONS
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY
QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT,
ALL OF WHICH ARE EXPRESSLY DISCLAIMED. ACTIONTEC ELECTRONICS
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF ITS PRODUCTS.
ACTIONTEC ELECTRONICS SHALL NOT BE LIABLE UNDER THIS WARRANTY
IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT
OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION
OR TESTING, UNAUTHORIZED ATTEMPT TO OPEN, REPAIR OR MODIFY THE
PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR
BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW,
ACTIONTEC ELECTRONICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS
PRODUCT, EVEN IF ACTIONTEC ELECTRONICS OR ITS AUTHORIZED RESELLER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT ACTIONTEC ELECTRONICS’ OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN
SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Disclaimer: Some countries, states or provinces do not allow the exclusion or
limitation of implied warranties or the limitation of incidental or consequential
damages for certain products supplied to consumers, or the limitation of liability
for personal injury, so the above limitations and exclusions may be limited in their
application to you. When the implied warranties are not allowed to be excluded in
their entirety, they will be limited to the duration of the applicable written warranty.
This warranty gives you specific legal rights which may vary depending on local law.
Dispute Resolution: The customer may contact the Director of Technical Support
in the event the Customer is not satisfied with Actiontec Electronics’ response to
the complaint. In the event that the Customer is still not satisfied with the response
of the Director of Technical Support, the Customer is instructed to contact the
Director of Marketing. In the event that the Customer is still not satisfied with the
response of the Director of Marketing, the Customer is instructed to contact the
Chief Financial Officer and/or President.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
Governing Law: This Limited Warranty shall be governed by the laws of the State
of California, U.S.A., excluding its conflicts of laws and principles, and excluding
the United Nations Convention on Contracts for the International Sale of Goods.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
|