Installation Instructions for the Acer Monitor Drivers that
are not Digitally Signed
In the event that the driver you have downloaded from the Acer web site is not digitally signed, please
follow the steps below. Note: these instructions are for the AL2032 driver and will be similar for any
non-digitally signed driver.
1.Click mouse right button and chose "Properties"
Download from Www.Somanuals.com. All Manuals Search And Download.
6/7. Click "Driver" then "Update Driver..."
Download from Www.Somanuals.com. All Manuals Search And Download.
8/9. Hardware Update Wizard will pop up and ask you if windows can connect to Windows Update to search for
software. Choose "No, not at this time” then click "Next>"
10/11. Choose"Install from a list or specific location (Advanced)” and click “Next>”
Download from Www.Somanuals.com. All Manuals Search And Download.
12/13.Choose "Don't search. I will choose the driver to install" and click "Next>".
14/15.Choose"Have Disk...." and click "Next>"
Download from Www.Somanuals.com. All Manuals Search And Download.
16.Click "Browse..." to locate the files.
17/18. Link to folder "C:\AL2032W Driver" and find "07F0.inf", and Click "open".
Download from Www.Somanuals.com. All Manuals Search And Download.
19.Click "OK" to the next step.
20.You can see AL2032W driver found . Click "Next>"
Download from Www.Somanuals.com. All Manuals Search And Download.
21.During the installation , the system will warn you that this driver has not passed Windows Logo testing. Click
"Continue Anyway" and it will start to install the driver files.
22. After the files are copied , the installation is finished . Click "Finish" to close the installation.
Download from Www.Somanuals.com. All Manuals Search And Download.
23. In Display Properties , you can see AL2032W is installed and 1680x1050 resolution is selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
|