Accusplit Fitness Electronics AH120M9 User Manual

ACCUSPLIT  
AH120M9 PEDOMETER  
ACCUSPLIT, Inc.  
2290A Ringwood Ave., San Jose, CA 95131  
800-965-2008 • 925-226-0888 • FAX 925-463-0147  
Eat Right! Walk More! Live Well!  
The ACCUSPLIT Lifestyle  
Operating Instructions  
990-003B  
How to Open your pedometer.  
See diagrams at right.  
DISPLAYS  
CURRENT DAY  
Display  
8922  
16:30  
7644  
days  
1
MEMORY  
Display  
MEMORY  
2
3
5
7
display area (flashes when in memory mode)  
The pedometer has two display modes: CURRENT DAY and  
MEMORY.  
SETTING UP YOUR PEDOMETER  
ACCUSPLIT products use a common setting procedure,  
S1-S2-S3-S4.  
Press S1 for 2 seconds: Enter the SET mode  
Press S2: Change the field to be set  
Press S3: Change the field value  
1. CURRENT DAY display: Memory display area in  
lower right of screen is blank and clock is present  
in lower left corner.  
2. MEMORY display: Memory display area in lower  
right of screen shows which days results you are  
viewing.To enter MEMORY display, press the gray  
“M” button.  
Return to CURRENT DAY display by repeatedly pressing  
the gray “M” button until the memory display area is  
blank, and clock returns.  
Press S4 for 2 seconds: Exit the SET mode  
Make sure you are in CURRENT DAY display when setting up  
your pedometer and checking today’s steps.  
4
2. Press the gray S3 button to increase the HOUR display.  
Hold the button down to change hours quickly.  
PM hours are displayed in military time (1:00 PM is  
13:00, 2:00 PM is 14:00, etc.).  
3. Press the yellow S2 button to switch from the HOUR  
display to the MINUTE display.The MINUTE display  
will start to blink.  
4. Press the gray S3 button to increase the MINUTE  
display. Hold the button down to change minutes  
quickly.  
5. Press and hold the yellow S4 button for 2 seconds to  
exit SET mode and return to STEP mode.The display  
will stop flashing.  
SETTING THE CLOCK  
8922  
16:30  
The clock must be set in order for the memorys automatic  
rollover function to work correctly.  
1. Press and hold the gray S1 button for 2 seconds.The  
HOUR display will start to blink, showing that you’ve  
entered SET mode.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEARING THE MEMORIES  
REPLACING THE BATTERY  
Auto Reset: At 3:50 AM every day, the previous days STEP  
record is automatically saved and STEP display resets to 0.  
You do not need to press the RESET button every day.  
Manual Reset: To reset todays STEP data to 0, press and  
hold the yellow RESET button for 2 seconds. Note: Resetting  
todays steps before automatic nightly rollover prevents them  
from being tallied in memory.  
System Reset:To reset all memories to 0 (including the clock),  
press the recessed SYSTEM RESET button in the lower left  
corner of the front of the display. (Use a pen or the end of  
a paper clip.) Note: In case of irregular display due to static  
electricity, pressing the SYSTEM RESET button, and then  
resetting the CLOCK, will return the unit to normal.  
1. When the figures on the display start to blink, it is  
time to replace the battery.  
2. The unit uses oneType CR2032 3-volt lithium battery.  
3. Insert a coin into the slot at the bottom of the body  
case.Twist the coin to remove the front case.  
4. Locate the BATTERY HOLDING PLATE at the bottom  
left corner of the inside case. Remove the plate by  
loosening the two small screws with a small Phillips  
head screwdriver.  
5. Take out the old battery and replace it with a new  
battery. Place the batterys positive (+) terminal  
FACE UP while you install it into the pedometer.  
16  
17  
CAUTION: Please DO NOT TOUCH inner pedometer parts,  
other than battery. Touching the sensor mechanism may  
affect the accuracy of the pedometer.  
and back case together, then pressing the bottom of  
the case together. If the two halves don’t go together  
easily, check if the front case is upside down!  
6. Reinstall the BATTERY HOLDING PLATE  
by tightening the two  
screws. Put the case  
back together by  
7. Reset the CLOCK to restore all functions to your  
pedometer.  
matching the  
top edges of  
the front case  
NO-PROOF-OF-PURCHASE LIMITEDWARRANTY  
Free service for first year of ownership;  
$12 fee for service thereafter. See label inside unit for date.  
Terminal  
Screws  
18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Switch 3C16950 User Manual
AAMP of America Speaker SD20 HD20 User Manual
Acnodes Car Video System RP 1170 User Manual
Alcatel Lucent Switch 1850 TSS 100 User Manual
AllerAir Air Cleaner 600 D User Manual
Alvin Mobility Aid CH277 User Manual
AMX Switch AVS SL PR 0401 0601 User Manual
Audiovox Stereo Receiver XMFM1 XM User Manual
Behringer Music Mixer BXR1800H User Manual
Behringer Network Card UCA202 User Manual