PCMCIA
Fax Modem 56K
Quick Installation Guide
M73-APO02-390
Download from Www.Somanuals.com. All Manuals Search And Download
HARDWARE INSTALLATION
1. Locate the PCMCIA slot of your system.
2. Align the PCMCIA FAX MODEM 56K PC
Card toward the PCMCIA slot. Push evenly
and steadily until it is seated.
Notebook
Connects to RJ-11 phone jack
3. Connect the other end of the PC Card cable
to the telephone line outlet.
4. You are now ready to continue the software
installation.
CAUTION
To reduce the risk of fire, use only No. 26
AWG or larger telecommunication line cord.
For Windows NT does not support
“Hot Insert/Remove”, be sure to
complete the hardware installation as
described above before you start
Windows
NT
and
software
installation.
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download
SOFTWARE INSTALLATION
Installation for Windows 98
1. As soon as the PCMCIA Fax Modem 56K
PC is inserted into the PCMCIA slot,
Windows automatically detects the new
hardware device and the following message
will be prompted.
2. Insert the device driver compact disc into
your CD-ROM drive. Click Next.
3. Select Specify
a
location when the
following figure appears. Enter the CD-
ROM drive letter followed by driver\win98.
Click Next. Or you may click the Browse
button to select the driver\win98 folder in
your CD-ROM drive.
4. When the following figure appears, click
Finish. The Installation program will
continue.
5. Click Next to continue.
6. Select Search for the best driver… and
click Next.
7. Follow the on-screen instruction to proceed.
8. Click Next to continue.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download
9. The installation program will proceed
automatically. Click Finish to complete the
installation.
Installation for Windows 2000
If you want to use the Microsoft built-in driver,
make sure to execute d:\Driver\Win2000\
PAR.exe. Or perform the following procedures
to update the latest driver.
1. Once the PCMCIA Fax Modem 56K PC
Card is plugged into your PCMCIA slot,
Windows will prompt you
a
standard
PCMCIA Card Modem has been installed
and ask you if you want to restart your
computer. Select No.
2. Double-click the small icon at the right
bottom on your screen as illustrated below. If
the icon does not appear at all, go to My
ComputerÆ
Control
PanelÆ
SystemÆHardwareÆ device Manager.
Select Modems and skip to Step 4.
3. Click Properties.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download
4. Select the Driver tab. Click the Update
Driver…button.
5. Click Next to continue.
6. Select Display a list of the known drivers
for this device so that I can choose a
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download
specific driver as illustrated below. And
click Next.
7. Click Have Disk when the following dialog
box appears.
8. Load the CD that contains the device driver
into your CD drive. Click Browse and direct
the proper file location with the disk drive
followed by Driver\Win2000\LTW2KG.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download
9. Select LTW2KG, and click Open. Follow
the on-screen instructions to proceed.
10. When the following figure appears, click
Next.
11. When Windows prompt you an Update
Driver Warning message. Select Yes.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download
12. Click Next to continue.
13. Click Yes to continue at the Digital
Signature Not Found screen.
14. Click finish to complete the installation.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download
15. Remember to restart your computer to
activate this new device.
Installation for Windows Millennium
If you want to use the Microsoft built-in driver,
make
sure
to
execute
d:\Driver\WinME\PAR.exe. Or perform the
following procedures to update the latest driver.
1. Once the PCMCIA Fax Modem 56K PC
Card is plugged into the PCMCIA slot of
your system, Windows will automatically
detect the Lucent Win Modem.
2. To update WDM Communication Device
driver,
right-click
My
ComputerÆPropertiesÆDevice Manager.
3. Click WDM Modem Enumerator to
expand.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download
4. Load the device driver into the CD-ROM
drive of your system. Click
PropertiesÆDriverÆ Update Driver.
5. Select Specify the location of the driver
(Advanced) and click Next.
6. Select Display a list of all the drivers…and
click Next.
7. Click the Have Disk…button.
Click
Browse to select the CD-ROM drive where
you put the device driver. (for example: D:\)
Enter the CD-ROM driver letter followed by
Driver\WinME.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download
8. Click Next.
9. Click Next to proceed.
10. Click OK to finish the installation.
11. Go back to step 2. Click Modem to expand.
12. Load the device driver into the CD-ROM
drive of your system. Click PropertiesÆ
Driver ÆUpdate Driver.
13. Select Specify the location of the driver
(Advanced) and click Next.
14. Select Display a list of all the drivers…and
click Next.
15. Click the Have Disk…button.
Click
Browse to select the CD-ROM drive where
you put the device driver. (for example: D:\)
Enter the CD-ROM driver letter followed by
Driver\WinME.
16. Click Next.
17. Click Next to proceed.
18. Click Finish to complete the installation.
19. To verify if the PCMCIA Fax Modem 56K
exists in your system, go to Device
Manager. PCMCIA Fax Modem 56K and
PCMCIA Fax Modem 56K WDM
Modem Enumerator should be found. If
not, contact your dealer for technical
support.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download
Installation for Windows XP
1. Once the device is well inserted into your
PCMCIA slot, windows will prompt you the
following message. Insert the device driver
CD (or diskette). Select install the hardware
automatically … and click next.
2. Select the device you inserted and click next.
3. Click Continue Anyway. Then windows will
start to copy the appropriate driver into your
system.
4. Click finish to complete the software
installation.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download
5. To verify if the device exists in your system,
go to Start Æ Control Panel ÆSystem
ÆHardware ÆDevice Manager. Check if
the device is listed. If not, contact your dealer
for technical support.
Installation for Windows NT
1. Before you start Windows NT, make sure
the PCMCIA Fax Modem 56K PC Card has
been properly inserted into the free
PCMCIA slot of your computer.
2. Load the device driver compact disk in the
CD-ROM drive.
3. Start Windows NT.
4. Go to My Computer.
5. Click the CD-ROM drive. Click the
driver\winnt folder. Or you may click the
Browse button to select the CD-ROM drive
and the driver\winnt folder.
6. Double-click setup.exe. The installation
program will proceed automatically.
Note: If Softex or Card Wizard was already
installed in your system, Windows will appear
message for PC Card malfunctioning. Ignore
this message and install the WinNT driver.
Remember to reboot after the installation.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download
|