TM
MBU 400
User Guide
Release 1.0
41-001286-00
Rev 00
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Instructions...................................................................................................... 5
Importantes mesures de sécurité ................................................................................................................................ 5
Software License Agreement........................................................................................................ 6
FCC Information........................................................................................................................... 7
Applicable for Coin or Pay Phone Only .................................................................................................................... 9
Safety Information ...................................................................................................................... 10
About This Guide........................................................................................................................ 13
Introduction................................................................................................................................. 14
Getting Started ............................................................................................................................ 18
MBU Gateway ......................................................................................................................................................... 18
Registering the 420d Handset .................................................................................................................................. 19
Using the 420d Handset .............................................................................................................. 25
Using the Speakerphone .......................................................................................................................................... 27
Changing the PIN Code for VoIP Settings .............................................................................................................. 28
Changing the Access Code ...................................................................................................................................... 28
Customizing Your Phone............................................................................................................ 30
Entering Text, Numbers, and Symbols .................................................................................................................... 30
Specifying the Primary Line for Outgoing Calls ..................................................................................................... 35
Changing the Display Contrast ................................................................................................................................ 36
Setting Do Not Disturb ............................................................................................................................................ 37
Setting Audio ........................................................................................................................................................... 37
Aastra MBU 400 User Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Answering Calls..................................................................................................... 42
Calling from the Call Log ........................................................................................................................................ 45
Calling Using Speeddial .......................................................................................................................................... 47
Handling Calls............................................................................................................................. 50
Placing a Call on Hold ............................................................................................................................................. 50
Calling with a Call on Hold ..................................................................................................................................... 50
Transferring Calls .................................................................................................................................................... 52
Managing Calls............................................................................................................................ 54
Contacts List ............................................................................................................................................................ 54
Call Log ................................................................................................................................................................... 58
Additional Features..................................................................................................................... 60
Resetting the MBU .................................................................................................................................................. 60
Troubleshooting........................................................................................................................... 62
Limited Warranty ....................................................................................................................... 65
Index.............................................................................................................................................. 67
4
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock and injury to persons, including the
following:
1. Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of
batteries in a fire. They may explode. Check with local codes for possible special
disposal instructions.
5. CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS. USE ONLY WITH Shenzhen Bak Technology Co., Ltd,
BAK06-AS02-10128I 3.7V 650mAh Li-ion rechargeable battery pack.
SAVE THESE INSTRUCTIONS
Importantes mesures de sécurité
Certaines mesures de sécurité doivent être prises pendant l’utilisation de matérial
téléphonique afin de réduire les risques d’incendie, de choc électrique et de blessures.
En voici quelquesunes:
1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une baignoire, d’un lavabo,
d’un évier de cuisine, d’un bac à laver, dans un sous-sol humide ou près d’une
piscine.
2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil sans fil) pendant un
orage électrique. Ceci peut présenter un risque de choc électrique causé par la
foudre.
3. Ne pas utiliser l’appareil téléphonique pour signaler une fuite de gaz s’il est situé
près de la fuite.
4. Utiliser seulement le cordon d’alimentation et le type de piles indiqués dans ce
manuel. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer aux
règlements pertinents quant à l’élimination des piles.
5. La socklet-sortie sera installée près de l’équipement et serafacilement accessible
6. ATTENTION
Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer
uniquement avec une batterie du même type ou d’un type équivalent recommandé par le
constructeur. Mettre au rebut les batteries usagées conformément aux instructions du
fabricant. (Shenzhen Bak Technology Co., Ltd, BAK06-AS02-10128I 3.7V 650mAh Li-ion
rechargeable battery pack).
CONSERVER CES INSTRUCTIONS
Aastra MBU 400 Administrator Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Aastra Telecom Inc., hereinafter known as "Seller", grants to Customer a personal,
worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use
license to use Software in object form solely with the Equipment for which the
Software was intended. This Product may integrate programs, licensed to Aastra by
third party Suppliers, for distribution under the terms of this agreement. These
programs are confidential and proprietary, and are protected as such by copyright law
as unpublished works and by international treaties to the fullest extent under the
applicable law of the jurisdiction of the Customer. In addition, these confidential and
proprietary programs are works conforming to the requirements of Section 401 of title
17 of the United States Code. Customer shall not disclose to any third party such
confidential and proprietary programs and information and shall not export licensed
Software to any country except in accordance with United States Export laws and
restrictions.
Customer agrees to not reverse engineer, decompile, disassemble or display Software
furnished in object code form. Customer shall not modify, copy, reproduce, distribute,
transcribe, translate or reduce to electronic medium or machine readable form or
language, derive source code without the express written consent of the Seller and its
Suppliers, or disseminate or otherwise disclose the Software to third parties. All
Software furnished hereunder (whether or not part of firmware), including all copies
thereof, are and shall remain the property of Seller and its Suppliers and are subject to
the terms and conditions of this agreement. All rights reserved.
Customer's use of this software shall be deemed to reflect Customer's agreement to
abide by the terms and conditions contained herein. Removal or modification of
trademarks, copyright notices, logos, etc., or the use of Software on any Equipment
other than that for which it is intended, or any other material breach of this
Agreement, shall automatically terminate this license. If this Agreement is terminated
for breach, Customer shall immediately discontinue use and destroy or return to
Seller all licensed software and other confidential or proprietary information of Seller.
In no event shall Seller or its suppliers or licensors be liable for any damages
whatsoever (including without limitation, damages for loss of business profits,
business interruption, loss of business information, other pecuniary loss, or
consequential damages) arising out of the use of or inability to use the software, even
if Seller has been advised of the possibility of such damages.
6
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
Contact your System Administrator or Technical Support for any questions
regarding your MBU 400. Have your serial number and MAC address ready when
contacting support. You can locate the serial number and MAC address on the bottom
of the MBU. For inquiries concerning telephony services, contact your Internet
Telephony Service Provider. For inquiries concerning your broadband connection,
contact your Internet Service Provider (ISP), and for inquiries concerning on-screen
information services, contact your information services provider.
For the EU: The telephone’s conformity with EU directives is confirmed by the
CE symbol. We hereby declare that the MBU and/or the Aastra 420d Handset are in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
For the US: This equipment complies with Part 15 of the FCC rules and Part 68 of
the FCC rules, and the requirements adopted by the Administrative Council for
Terminal Attachments (ACTA). Located on the equipment is a label that contains,
among other information, the FCC registration number, and the ringer equivalence
number (REN). If requested, this information must be provided to the telephone
company.
The REN is used to determine the number of devices which may be connected to the
telephone line. Excessive RENs on the telephone line may result in devices not
ringing in response to an incoming call. In most, but not all areas, the sum of the
RENs should not exceed five (5.0). To ascertain the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone
company to determine the maximum REN for the calling area.
This equipment cannot be used on the telephone company-provided coin service.
Connection to Party Line Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. If
such advance notice is not practicable, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe this is necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could affect the operation of the equipment. If this happens, the
telephone company will provide advance notice to enable you to make the necessary
modifications in order to maintain uninterrupted service. If the trouble is causing
harm to the telephone network, the telephone company may request you to disconnect
the equipment from the network until the problem is resolved.
This equipment uses the following USOC jacks: RJ11C.
It is recommended that the customer install an AC surge arrester in the AC outlet to
which this device is connected. This is to avoid damage to the equipment caused by
local strikes of lightening and other electrical surges.
This product is manufactured for Aastra Telecom, Inc. Copyright© 2008. All rights
reserved. Any copying or reproduction of the product or its associated user manual is
strictly prohibited. The content of this document is subject to change without prior
notice.
Aastra MBU 400 User Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
US Service Center:
Aastra Telecom US - Service Center
900 Technology Park Drive
Billerica, MA, 01821, USA
Phone (978) 262-3200
For Industry Canada: "This product meets the applicable Industry Canada
technical specifications."
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In some cases, the
company’s inside wiring associated with a single line individual service may be
extended by means of a certified connector assembly (telephone extension cord). The
customer should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of
the power utility, telephone lines and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but
should contact the appropriate electric inspection authority, or electrician, as
appropriate.
‘’The Ringer Equivalence Number is an indication of the maximum number of
terminals allowed to be connected to a telephone interface. The termination on an
interface may consist of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the devices does not exceed
five.’’
Le présent materiel est conforme aux specifications techniques applicables
d’Industrie Canada. L’indice d’équivalence de la sonnerie (IES) sert à indiquer le
nombre maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d’une interface peut consister en une combinaison
quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence
de la sonnerie de tous les dispositifs n’excèdepas 5.
Consumer Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the back of this equipment is a label that contains, among other
information, a product identifier in the format US:T7HIP06B8015. If requested, this
number must be provided to the telephone company.
An applicable certification jacks Universal Service Order Codes (USOC) for the
equipment is provided (i.e., RJ11C) in the packaging with each piece of approved
terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
8
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. [For products approved after July 23, 2001, the REN for this product is part
of the product identifier that has the format US:T7HIP06B8015. The digits
represented by ## are the REN without a decimal point (e.g., 06 is a REN of 0.6). For
earlier products, the REN is separately shown on the label.]
If this equipment MBU 400 causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may be
required. But if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
Should you experience trouble with this equipment, please contact: Aastra Telecom
US – Service Centre, 900 Technology Part Drive, Billerica, MA, 01821, USA, Phone
(978) 262-3200, for repair or warranty information. If the equipment is causing harm
to the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
Please follow instructions for repairing if any (e.g. battery replacement section);
otherwise do not alternate or repair any parts of device except specified.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for
information.
NOTICE: If your home has specially wired alarm equipment connected to the
telephone line, ensure the installation of this 1.9GHz DECT Product for VoIP and
PSTN does not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qualified installer.
This equipment is hearing aid compatible.
NOTICE: According to telephone company reports, AC electrical surges, typically
resulting from lightning strikes, are very destructive to telephone equipment
connected to AC power sources. To minimize damage from these types of surges, a
surge arrestor is recommended.
Applicable for Coin or Pay Phone Only
To comply with state tariffs, the telephone company must be given notification prior
to connection for customer-owned coin or credit card phone. In some states, the state
public utility commission, public service commission or corporation commission
must give prior approval of connection.
Aastra MBU 400 User Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
Important Safety Information
Charge the battery or handset only in combination with 420d Charger and the
SALOM SSW-1444 adapter that comes with the product. Plug the SALOM SSW-
1444 AC/DC adaptor in a wall outlet socket near the equipment for easy access/
removal of the AC/DC adaptor.
Important Battery Information
This product uses rechargeable Lithium-ion batteries 3.7V, 650mAh. Only use
batteries that come with the handset or dedicated spare batteries marked with “Battery
Pack 3.7V 650mAh Li-ion”. Do not use any other type, since this may present a risk
of leakage, fire, explosion or other hazardous situation. For battery replacement or
removal please remove the battery cover of the handset. Never disassemble,
customize or short-circuit batteries. Do not place battery in fire or heat the battery.
Charge the battery or handset only in combination with 420d Charger and the
SALOM SSW-1444 adapter that comes with the product.
Sensitive Electronic Environment
Any radio-based equipment can potentially cause interference with other equipment
and can be interfered from other equipment. This also applies for DECT equipment.
However due to the very low transmission power level the chances for interference
are very small. Research proves that operational DECT phones normally don’t
influence electronic equipment however some precautions must be taken into account
for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT
phones operate in straight nearness of sensitive electronic equipment incidental
influence can appear. You are advised not to place the DECT phone on or close (less
than 10cm) to this kind of equipment, even in standby mode. Please also use the other
documentation supplied with the various parts of your telephone system.
Product Disposal Information
For countries in the European Union
The symbol depicted here has been affixed to your product in order to
inform you that electrical and electronic products should not be disposed
of as municipal waste.
Electrical and electronic products including the cables, plugs and accessories should
be disposed of separately in order to allow proper treatment, recovery and recycling.
These products should be taken to a designated facility where the best available
treatment, recovery and recycling techniques are available. Separate disposal has
significant advantages: valuable materials can be re-used and it prevents the
dispersion of unwanted substances into the municipal waste stream. This contributes
to the protection of human health and the environment.
Please be informed that a fine may be imposed for illegal disposal of electrical and
electronic products via the general municipal waste stream. In order to facilitate
separate disposal and environmentally sound recycling, arrangements have been
made for local collection and recycling. In case your electrical and electronic products
need to be disposed of please refer to your supplier or the contractual agreements that
your company has made upon acquisition of these products.
10
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
For countries outside the European Union
Disposal of electrical and electronic products in countries outside the European Union
should be done in line with the local regulations. If no arrangement has been made
with Aastra or your supplier, please contact the local authorities for further
information.
Battery Disposal Information
Defect or exhausted batteries should never be disposed of as municipal waste. Return
old batteries to the battery supplier, a licensed battery dealer or a designated
collection facility. Do not incinerate batteries.
Aastra MBU 400 User Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
This User Guide provides the information required to use and configure the MBU 400
on your business or home network. It includes a description of the features and
functions of the Mobility Base Unit (MBU) and the Aastra 420d Handset. We
recommend reviewing the material in this guide before using the MBU 400 system on
your network.
Documentation
The following documentation can be found on the Aastra Telecom website at
www.aastratelecom.com:
• Aastra MBU 400 Installation Guide – Contains installation and set-up
instructions, general features and functions of the MBU and Handset. This
Installation Guide is included in the box with your MBU 400.
• Aastra MBU 400 User Guide – Describes the most commonly used features and
functions for an end user. Provides brief configuration information.
• Aastra MBU 400 Administrator Guide – Contains advanced Administrator
information and procedures for setting up and using the MBU and Aastra 420d
Handset. It also includes advanced configuration information. This Administrator
Guide is intended for the System Administrator only.
Aastra MBU 400 User Guide
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
The MBU 400 consists of a Mobility Base Unit (MBU) and the Aastra Digital
Enhanced Cordless Telephone handset (420d) that provide telephony service over the
Internet and over the Public Service Telephone Network (PSTN or landlines). You
can install the MBU on a desktop or on a wall, while the 420d handset sits in its
charging cradle on a desktop. You can register up to 8 handsets with the MBU. The
MBU supports up to 3 SIP calls and 1 PSTN call simultaneously.
You can setup the MBU 400 in your business or home environment to act as a small
hub with group calling, voicemail, individual SIP accounts, or SIP lines shared across
a group. Once installed, the handsets can handle all calls for every line (IP calls and
PSTN calls). Your System Administrator can configure your phone via transfer of a
configuration file over TFTP or HTTP, a local web interface, or the handset user
interface.
The MBU can be connected to the Internet (service provider required) via an Ethernet
cable connected to the LAN port, and/or the PSTN via a regular telephone cable
connected to the LINE (or landline) port. The LINE connection also allows for
emergency calling and provides the handling of call overflow on the MBU.
Features
MBU Features
Call and Telephony Features
• VoIP calling (based on SIP 2.0 - RFC3261)
• (optional) Landline calling over Public Service Telephone Network (PSTN)
• Up to 8 paired handsets, one line per handset (MBU supports up to 3 SIP calls and
1 PSTN call simultaneously)
• VoIP DTMF digit support (inband, SIP Info, RFC2833)
• Voicemail support (indicators for receiving and handling of voicemail, and call-to-
voicemail server)
14
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Other MBU Features
• System Administrator Web Interface Support ( English only)
• SIP accounts configured via WebUI, TFTP, or handsets
• Quality of Service
• Type of Service (ToS)
• CODECs
• Pulse Code Modulation A-law (PCMA) (G.711, 64 kbps)
• Pulse Code Modulation u-law (PCMU) (G.711, 64 kbps)
• iLBC (20 ms)
• G.729
• Maintenance, administration, and provisioning
• Digital Enhanced Cordless Telephone (DECT) interface
• Firmware updates via:
- Over-the-air programming
- File transfer of a configuration file over TFTP or HTTP, local Web interface, or
the handset user interface (System Administrator PIN required)
• Provisioning allowed via a configuration file, Web interface, or the handset user
interface*
• Debug and SIP trace report ability (via Web interface)
* The configuration file provisioning allows access to additional configuration
parameters. The local Web interface allows access to most configuration settings.
The handset user interface enables access to some VoIP account settings (access
can be controlled by a System Administrator PIN code if required).
Aastra 420d Handset Features
Display
• 128 x 128 pixels, 65K color support, backlight
• Graphical menu system
Aastra MBU 400 User Guide
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Call and Telephony Features
• 12 numerical keys, 5 navigation keys, 2 function keys
• Auto answer (when handset is lifted from the charger)
• Key lock option
• Call forward - all, busy, no answer
• Call timer
• Call transfer and call hold (for internal calls)
• Call waiting indication
• Caller ID with name from phone book
• Distinctive ringing
• Call log of incoming/outgoing/missed calls
• Call return (from call log)
• Customizable phone settings
• Intercom (handset to handset through MBU)
• Contacts List (up to 200 entries and 4 numbers per entry)
• Voicemail message support
• Speeddial support
• Three-way conferencing (2 handsets)
• Call hang up (upon return to charging cradle)
• On-hook dialing (pre-dial numbers before pressing off-hook button)
Audio Features
• Mute (disable microphone)
• Receiver volume control
• Ring tone melodies
• Ringer volume control
• Key sounds (click, DTMF, and special tones)
• Low battery and out-of-range audible warnings
• Speakerphone
• Headset jack (2.5 mm)
Other Handset Features
• Separate handset charging station
• Hearing aid compatible
• Multi-language support (Danish, German, English, Spanish, French, Italian,
Dutch, Portuguese, Finnish)
• Li-Ion battery pack
• Automatic or fixed registration of handset to MBU
• Status indicators in idle mode (signal, battery level, date and time)
• Message waiting indicator (missed calls, voicemail)
• Vibrator mode on handset
16
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Requirements
Before using the MBU 400 on your network, the following may be required
depending on your network connection:
• Broadband Internet connection – cable, DSL, or equivalent
• Internet Telephony Service Provider subscription – to make voice calls over your
Internet connection
• Analog telephone line subscription – to make ordinary phone calls (and
emergency calls) over the LINE port on the MBU (optional)
• In addition, before you start the installation process, the following may be
required:
— (optional) Wired Ethernet router or broadband modem for network and IP
connections
— (required) Power outlets for the MBU and the handset charger
— (optional) Telephone wall outlet used for landline telephony
Installation and Setup
If your System Administrator has not already setup your MBU 400, please refer to the
Aastra MBU 400 Installation Guide for basic installation and physical setup. For
advanced administration and configuration information, System Administrators
should refer to the Aastra MBU 400 Administrator Guide.
Aastra MBU 400 User Guide
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
The MBU 400 must be set up and configured prior to its first use. This section
describes the behavior and start up screens you may see on the 420d handset when the
MBU 400 is first plugged in, or when it is restarted.
See the MBU 400 Installation Guide for detailed installation instructions.
MBU Gateway
The Lights on the front of the MBU 400 indicate the current status. When starting the
system for the first time, the POWER and I-NET and VOIP lights should remain lit. If
the VOIP is not lit, the system has not yet been configured for internet calls.
To configure your MBU 400 for internet calls using the handset, see Configuring
assistance.
CALL
VOIP
I-NET
POWER
Side view
Front view
The following describes the indicator lights, ports and buttons on the MBU 400 which
provide information on the operating state, and allow you to enter the handset
registration mode.
Label
Description
POWER
Remains lit when the power is on.
I-NET
Remains lit when the MBU has an IP address. Flashes during
boot.
18
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Label (Continued) Description (Continued)
VOIP
Remains lit when the MBU is connected to an Internet
Telephony Service Provider.
CALL
Remains lit when a call is in progress (for both landline and
Internet calls).
Flashes during firmware updates.
RESET
(side panel)
Press to reboot the unit, activate configuration changes, and
enable handset registration mode.
Press and hold 15 seconds to reboot with factory default
settings. All front panel lights come on when a factory restart is
initiated.
NOTE: Configuration settings are lost during a factory default.
DC 9-20V
Indicates the power connection.
(side panel)
LAN
Indicates the Internet port.
(side panel)
LINE
Indicates the Telephone Line Connection port (PSTN).
(side panel)
Registering the 420d Handset
Each handset must be registered with your MBU 400 gateway before it can be used. If
the handset is not registered, one of the following message appears on the handset
displays:
Searching for Gateway
or
Please place handset in charger to start auto-registration with the gateway.
Reset the gateway to enable registration mode.
To register your handset do the following.
1. Ensure the base unit is connected to power.
2. Place the handset in the charger.
3. If the handset does not register automatically, press and release the RESET button
on the side of the MBU 400.
Pressing RESET reboots the MBU, following which it remains in registration
mode for 5 minutes. More than one handset can be registered in this period. To start
a new 5 minute registration period, press and release the RESET button again.
Successful registration ends with the idle screen on the handset as shown in the
Note: If you encounter problems registering your handset, try removing the handset
from the charger and replacing it, then resetting the MBU once again. If you have
Handsets can be registered and de-registered through the handset menu options. See
Aastra MBU 400 User Guide
19
Download from Www.Somanuals.com. All Manuals Search And Download.
420d Handset Key Descriptions
The Aastra 420 handset has a front keypad as well as some side keys. These keys can be used to
customize your handset as well as make and manage calls.
R
CLR
1
3
6
9
DEF
2
ABC
JKL
4
GHI
5
MNO
WXYZ
#
7
PQRS
8
TUV
0
*
The following table describes the keys on the key panel of your 420d handset.
Keys
Key Description
Softkeys - Select from the right and left choices
displayed in the bottom corners of the handset
screen using the softkeys. The handset idle screen
softkeys are Call log (left key) and Options (right
key).
Green Key - Answer an incoming call with the green
key. From idle mode the green key connects to the
primary line (set as Landline or VoIP) and dials the
number you have entered or selected.
R
Red Key - End calls, return to calls placed on hold,
and exit menus using the red key. (Pressing the red
key while within a menu may exit without saving
changes.)
CLR
OK Key - Access the Main Menu from idle mode,
and use the OK key to select menu items whenever
z
the
screen.
icon appears at the bottom of the handset
20
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Keys (Continued)
Key Description (Continued)
Navigation Keys - Scroll though menu items using
the left, right, top, and bottom navigational keys.
Star Key - Change the input mode while entering text
using the star key. The current input mode displays
*
Lock or unlock the keypad from idle mode using the
star key (press * then the Lock or Unlock softkey). A
key appears at the top of the handset display when
the keypad is locked. (See Locking/Unlocking the
Number Key - Toggle on or off the silent mode from
the idle screen by pressing the “#” key, and pressing
the Silence on or Silence off softkey as required
#
Volume Keys - (Located on the side of the handset.)
Use the volume + and - keys during an active call to
adjust the call volume.
+
From idle mode, use the volume + key to view the
system status menu, including the MAC address and
IP address of your phone system.
Speakerphone Key - (Located on the side of the
handset.) Toggle the speakerphone on and off using
the speakerphone key.
!
MBU 400 IP Address and System Status
To set some advanced MBU configuration options using an Internet browser, the
System Administrator needs the IP address of the phone. You can view the MBU IP
address and status information from the 420d handset screen. For setting advanced
configuration options, ask your System Administrator or refer to the Aastra MBU
400 Administrator Guide
To view the IP address and status of the MBU, do the following.
1. After pairing the handset to the MBU, press the + volume button on the side of the
handset.
Aastra MBU 400 User Guide
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The message "Connecting... Please wait" appears on the handset, followed shortly
by the MBU status screen.
2. Scroll down to see the IP address and other MBU status information.
System Status
--Network--
MAC Address
MAC Address
00-08-7g-98-45-cf
IP address
192.345.43.54 (D)
Boot Status
Failed
IP Address
--Gateway--
Version
Sw: 01:08 Hw: 1
Serial no.
255
Handset ID
0280000002340
--VoIP status--
VoIP register domain
Registration
SIP1:Registered
SIP2: Not registered
SIP3: Not registered
SIP4: Not registered
SIP5: Not registered
SIP6: Not registered
SIP7: Not registered
SIP8: Not registered
--EMS status--
EMS server
Registration
Failed
--RTP packets--
Received
No
3. Press the red key
to exit.
CLR
Note: If the MBU did not download a configuration file or did not receive an IP
address using DHCP, a Boot Status of "Failed" appears on the System Status page.
If your MBU 400 system is not using configuration files, for example, the Boot
Status will be "Failed" under normal operation.
Configuring Your Phone for First-Time Use
This section describes how to configure and set up your MBU 400 phone for first use.
If your MBU 400 System has been pre-configured by the Internet Telephony Service
Provider you purchased it from, the phone is ready for use once you have plugged in
all cables and connected the power. You can customize your phone using the
The MBU 400 phone functions much like an ordinary analog telephone. However,
because it is connected to the Internet, you have to configure your phone before it is
ready for first use. The initial configuration may have already been done for you by
your System Administrator.
22
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
If your MBU 400 has not yet been configured for internet calls, you will see this
message on the handset screen:
Configure SIP
domain
If you try to initiate a VoIP call, you will see the disconnected screen:
Disconnected
Connection error...
0:00:00
Configuration information can be entered through the handset, or by the System
Administrator using a web browser. See the Aastra MBU 400 Administrator Guide
for details of web configuration menus.
Configuring the Phone Using the Handset
In order to configure your phone using the handset, you need the Domain Name and
SIP Proxy information from your Internet Service Provider (ISP). If a PIN code has
been set by your System Administrator, you will also need the 4-digit PIN code.
To configure your phone using the handset, do the following.
1. In Idle mode, press OK z(the black circular button) to display the Main Menu.
2. Select Settings
and press OK z.
3. Select VoIP settings, and press OK z.
4. If prompted, enter the 4-digit PIN code and press OK z.
5. Select Accounts and press OK z.
Specify the Domain and the SIP proxy:
6. Select Domain, and press OK z.
7. Enter the domain name provided by your ISP, and press OK z.
8. Select SIP Proxy and press OK z.
9. Enter the domain name or IP address of the SIP proxy, if it is different from the
domain name in Step 2.
10. Press OK z.
Note: If you have more than one VoIP account, you must repeat the procedure
above for each account. You can have up to 8 phones registered with the MBU 400
gateway, and up to 8 VoIP accounts.
11. Select a SIP account, and press OK z. Valid values are SIP 1 through SIP 8.
Aastra MBU 400 User Guide
23
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Select the listed parameters one by one and press OK z.
For each parameter, key in the relevant information based on the account
information you received from your Internet Telephony Service Provider.
To switch between entering text, numbers, and symbols, press the Options softkey,
Display name (optional) – Caller ID that the called party sees.
SIP user name – usually the phone number you received from your ISP.
Authentication name – often the same as the SIP user name.
SIP password – the password you received from your ISP.
Nickname – name of the account used in Account and VoIP line settings within your
MBU 400 system.
Domain – registrar or domain address you received from your ISP; often the same
as the SIP proxy address.
SIP proxy–outbound proxy address you received from your ISP.
13. After each change, press OK z, then press the Yes softkey when prompted to
save changes.
14. You may be prompted to reset the gateway when you exit the VoIP settings menu;
if so press the Yes softkey to confirm. Otherwise press the RESET button on the
rear of the gateway when you have completed all changes.
Note: You must press the RESET button on the gateway after making configuration
changes from the handset in order for the changes to take affect.
24
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the 420d Handset
Handset Idle Screen
After successful registration of the handset to the MBU, the idle screen displays. The
following illustration describes the icons that appear on the idle screen.
Battery Status
Handset Name
Connection Status Indicator*
(and charging indicator)
(See the connection states
listed below.)
Handset 1
Time and Date
01:55PM
08/05/08
Call Log
Call Log
Options
Options
For incoming, outgoing,
and missed calls (activated
with the left softkey).
For redialing calls, viewing
active calls, landline calls,
and setting DND or call
waiting.
OK Key Indicator
Indicates that the OK
key can be used.
*The various states for the connection status indicator are described here.
Connection Status
Description
Black | Black - Indicates out of range of the MBU
White | Black - Indicates within range of the MBU, but not
ready for SIP calls
White | White - Indicates within range of the MBU and ready
for SIP calls on primary line
Idle Mode Options
When in idle mode, an Options softkey displays in the lower right corner of the
screen. Pressing the Options softkey displays the following options:
Idle Mode Options
Redial
Allows you to redial the last number dialed.
Active Calls
Displays the active calls for all handsets registered to the same
MBU.
Aastra MBU 400 User Guide
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Idle Mode Options (Continued)
Landline
DND
Allows you to place a call using the landline.
Allows you to enable/disable Do Not Disturb on your phone.
Call Waiting
Allows you to enable/disable Call Waiting on your phone.
Handset Main Menu
To display the Main Menu on the handset, press the circular OK key z in the center of
the navigation keys as shown below.
OK Key
Navigation Keys
(opens the Main Menu)
Main Menu
The following icons appear on the Main Menu screen.
Conttacts
Settings
Call Log
Intercom
Contacts
Messages (voicemail)
OK Key Indicator
Indicates that the OK key can
be used.
The Handset Main Menu has five options to choose between when customizing and
operating the phone.
Main Menu Icon
Description
Intercom - Allows you use the Intercom to communicate between two handsets
registered to the same MBU.
Messages - Allows you to access and play your voicemail messages. Your voicemail
service can be provided by your Service Provider or a local mail server. If using a Service
Provider for voicemail, contact that provider for more information on how to use your
voicemail service.
26
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Icon
Description (Continued)
Call Log - Allows you to access and view the Call Log which contains a list of all
incoming, outgoing, and missed calls. From the Call Log, you can also perform the
following:
• Add a selected entry as a contact in the Contacts List
• Remove an entry from the Call Log and place it in the Contacts List
• Place a call from the entry over a landline
• Place a call from the entry over VoIP
• Edit the entry for placing a call
• Delete a single entry
• Delete all entries
Settings - Allows you to customize your phone using the following settings:
• Audio Settings
• Telephony Settings
• VoIP Settings
• Internet Settings (This menu contains administrator settings. See the Aastra MBU 400
Administrator Guide for more information.)
• System Settings
Contacts - Allows you to access and view your Contacts List. From the Contacts List,
you can also perform the following:
• Place a call over the landline
• Place a call over VoIP
• Add a contact
• Edit a contact
• Delete a contact
• Delete all contacts
• Set up a speeddial
• Set up a group of contacts
Using the Volume Control
The volume control is located on the left side of the phone. You can increase or
decrease the volume while on an active call as required.
+
To adjust the volume on the phone, do the following.
1. Press the + key to increase the volume as required.
2. Press the - key to decrease the volume as required.
Using the Speakerphone
The speakerphone control is located on the left side of the phone beneath the volume
control. You can use the speakerphone key while dialing or during an active call to
turn the speakerphone on and off.
!
To turn the speakerphone on and off do the following.
1. Press the speakerphone key to turn the speakerphone on.
A speaker
on.
appears at the top of the handset display when the speakerphone is
2. Press the speakerphone key again to turn the speakerphone off.
Aastra MBU 400 User Guide
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking/Unlocking the Keypad
You can lock and unlock the keypad on the phone when required. When locked, it
prevents unauthorized users from using your phone, and prevents you from accidently
hitting the keypad if you are carrying the phone around.
To lock or unlock the keypad do the following.
1. Press the * key.
2. Press the Lock or Unlock softkey.
Note: The keypad unlocks automatically when you answer an incoming call, or if you
make an emergency call. For more information about emergency calls, see Making
Changing the PIN Code for VoIP Settings
Under some configurations, selected menus are protected with a PIN code. With a
PIN code set no one is able to access these menus on your handset without first
entering the 4-digit code. If you need to know your PIN code, contact your System
Administrator or try the default value "2222". Once you have entered the correct PIN
code you can change it using the phone handset.
To change a VoIP PIN code, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select VoIP settings, and press OK z.
4. If prompted, enter the current 4-digit PIN code and press OK z.
5. Select Change PIN code and press OK z.
6. Enter a new PIN code using the numbers on the keypad, and press OK z.
You can enter up to 4 numerical characters for your PIN. The characters display as
you type, but are encrypted after saving the PIN.
Note: If you or someone else has already set a PIN code, you need to enter the old
code to access the VoIP settings menu.
7. Press the Yes softkey when prompted to save the PIN code.
8. For future reference, write your new PIN code here:
Note: The new PIN code does not take effect until the MBU 400 has been reset.
Changing the Access Code
The access code is used to ensure your handset connects to the correct gateway in an
environment with more than one gateway present. Handset and gateway access codes
must be the same at all times, and all handsets must use the same code as the gateway.
Note: If you forget the gateway access code and are unable to register a handset, the
access code can be reset by the System Administrator using the web interface.
When registering a new handset, ensure that its access code is modified to the same
value as the access code of the gateway. For information on how to register the
28
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Access Code on the Gateway:
To change the gateway access code using the handset, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Access Code, and press OK z.
5. Select Gateway, and press OK z.
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK.
8. Press the Yes softkey when prompted to save the access code.
The new access code is saved by the gateway. Record the access code here for
future reference:
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
Changing the Access Code on the Handset
To change the handset access code, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Access Code, and press OK z.
5. Select Handset, and press OK z.
6. Enter a new access code.
The characters display as you type, but are encrypted after saving the access code.
7. Press OK z.
8. Press the Yes softkey when prompted to save the access code.
9. Press the red key
to exit.
CLR
Note: All handset access codes must match the gateway access code, or the
handsets will not register after the next reset.
Aastra MBU 400 User Guide
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Phone
Changing the Handset Name
After handsets register with the gateway, the default names assigned to each handset
are Handset 1, Handset 2, Handset 3,.........up to Handset 8.
If required, you can assign a name to your handset to identify your handset from any
other handsets registered with the same gateway.
For more information about entering text, numbers, and symbols, see the section, Text
To change the handset display name do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Handset Settings, and press OK z.
5. Select Handset name, and press OK z.
6. Press the * key to toggle the input mode for entering characters.The input mode
you select displays in the upper right corner on the screen. Press the Options
softkey and select the Insert symbol option to insert symbols if required.
7. Enter the handset name using the keypad on the phone.
8. Press OK z, and press the Yes softkey at the save prompt.
Note: Before saving the new handset name, you can cancel at any time by pressing
the red key
and pressing the Yes softkey at the discard prompt. The handset
CLR
name returns to its previous setting.
Entering Text, Numbers, and Symbols
The handset interface allows you to perform several options to customize your phone,
some of which require you to enter text and numbers on the handset screen. This
section describes how to enter text and numbers on your phone.
When in an option requiring you to enter or edit text or numbers (for example when
adding contacts to the Contacts List), the following softkeys display for your use:
The Erase softkey enables you to backspace and erase characters that was just
entered.
The Options softkey provides you with the following two options:
Input mode
Insert symbol
30
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Text Input Modes
When you reach a screen requiring text or numerical input, the Options softkey on the
right allows you to switch between different types of input. Pressing the Options
softkey you can choose between Input mode (for characters) and Insert symbol.
Input Characters:
Input mode allows you to select the format you want to enter text or numbers. You can
select from the following formats for entering characters:
ABC
Abc
Types all upper case letters.
Types first letter in a sentence in upper case and the remaining
letters in lower case.
abc
123
Types all lower case letters.
Types numbers only.
You can change the case of the letters as required and enable the numbers (even in the
middle of text characters) by pressing the * key.
To change the text input mode when on a screen that requires you to enter or edit
characters do the following.
1. Press the Options softkey.
2. Select Input Mode and press OK z.
3. From the list of input modes, select the format you want to use to input characters
or numbers, and press OK z.
Note: While entering characters, you can press the * (star key) to quickly change
the input mode. Whether selecting an input mode from the list, or pressing the* key,
the current input mode displays in the upper right corner of the screen.
Input Symbols
While inputting text or numbers, you can also insert symbol characters if required.
Input symbol brings up a screen of available symbols allowing you to insert symbols
as needed.
To insert symbols when on a screen that requires you to enter or edit characters do the
following.
1. Press the Options softkey.
2. Select Insert Symbol and press OK z.
A screen displays available symbols.
3. Use the navigation keys to scroll to the symbol you want to insert.
4. Press OK z.
The symbol you select displays in the position your cursor was in before you
selected the symbol.
Aastra MBU 400 User Guide
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying a Language on the Handset
The individual handset language settings determines in which language the text on the
display is presented.
Note: Before you start using your phone, we strongly recommend that you specify
handset language, country selection, time zone, and routing of emergency dials to
ensure that your Aastra phone functions properly.
To set the handset language do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Language, and press OK z.
5. Select the preferred language to display on your handset, and press OK z.
Available languages are English, French, Spanish, German, Portuguese, Danish,
Dutch, Finnish, and Italian.
6. Press the red key
to exit.
CLR
Reaching the Language List Directly
If you have selected a language you do not understand and you cannot find the
language menu again, do the following:
1. In Idle mode, press OK z to display the Main Menu.
2. Enter 888. The language list displays.
3. Select the applicable language you want to use on the phone.
4. Select OK z to save the language setting.
Setting Time and Date
By default, time and date are automatically synchronized with a time server on the
Internet to ensure that the time and date displayed on the MBU 400 System is always
correct. However, you can disable automatic time setting and set the time and date on
your phone manually.
Some Time and Date options are not available unless the automatic time setting is
disabled and the gateway reset. Unavailable options appear in red and cannot be
selected.
Automatic Time/Date Settings
Automatic time setting is enabled by default. You can disable automatic time setting
if required.
To disable automatic time setting do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
32
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Time and date, and press OK z.
5. Select Auto set time, and press OK z.
6. Select Disabled, and press OK z.
7. Press the RESET button on the rear of the gateway for the changes to take effect,
or press the Yes softkey when prompted to reset the gateway from the handset.
Setting Time Manually
The correct time can be entered on the handset if required.
Note: You must disable automatic time/date setting before manually setting the time.
To manually set the time on the phone, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and date, and press OK z.
5. Select Set time, and press OK z.
6. Use the keypad to enter the correct time in the format "hours:minutes" and press
OK z when done.
Changing Time Format
The handset time format can be switched between 12 hour (am/pm) and 24 hour
format.
To change the time format, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and date, and press OK z.
5. Select Time format, and press OK z.
6. Select a time format to use, and press OK z.Valid values are AM/PM or 24 hour.
Setting Date Manually
The correct date can be entered on the handset if required.
Note: You must disable automatic time/date setting before manually setting the date.
To manually set the date on the phone, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and date, and press OK z.
5. Select Set date, and press OK z.
Aastra MBU 400 User Guide
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Use the key pad to enter the correct date in the format "month/day/year" or "day-
month-year" and press OK z when done.
Note: To switch the date format between US month/day/year and European day-
Changing Date Format
The handset date format can be switched between US (month/day/year) and European
(day-month-year) format.
To change the date format do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and date, and press OK z.
5. Select Date format, and press OK z.
6. Select a date format to use, and press OK z.
Changing Time Zone
Setting the time zone properly ensures that the time displayed on the Idle mode screen
corresponds to the time zone in your geographical location. Time zones on the phone
are specified in Greenwich Meridian Time (GMT) (same as Universal Time). GMT is
measured from the Greenwich Meridian Line at the Royal Observatory in Greenwich.
Greenwich is the place from where all time zones are measured. For automatic time
setting to function properly, it is important that you have specified the correct time
zone.
To change the time zone:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and Date, and press OK z.
5. Select Time Zone and press OK z.
6. Select the appropriate time zone and press OK z.The following table lists some
common time zones.
Time Zone Location
GMT+10
GMT+9:30
GMT+9
Australian Eastern Standard Time (AEST)
Sydney
Australia Central Standard Time (ACST)
Darwin; Adelaide
Japan Standard Time (JST)
Tokyo
GMT+8
Australian Western Standard Time (AWST)
China Coast Time (CCT)
Perth; Beijing
GMT+3
Bagdad Time (BT)
Moscow
34
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Zone Location (Continued)
GMT+2
GMT+1
GMT
Eastern European Time (EET)
Cairo
Central European Time (CET)
Paris; Stockholm; Vienna
Greenwich Mean Time (GMT)
London
GMT-4
GMT-5
Atlantic Standard Time (AST)
Eastern Standard Time (EST)
New York; Washington DC; Ottawa; Toronto
GMT-6
GMT-7
GMT-8
Central Standard Time (CST)
Mexico City
Mountain Standard Time (MST)
Denver; Phoenix
Pacific Standard Time (PST)
Los Angeles; Vancouver
Setting Daylight Saving Time (DST)
To set daylight saving time:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings and press OK z.
3. Select System Settings, and press OK z.
4. Select Time and date, and press OK z.
5. Select Daylight saving, and press OK z.
6. Select the appropriate DST option, and press OK z.Valid values are 1 hour DST or
No DST.
Specifying the Primary Line for Outgoing Calls
You must specify the primary line each handset uses for outgoing calls when you
R
press the green key
When you make a call, the primary line is used unless you specify otherwise. You can
tell which type of line you are using by checking the call icon, with indicating a
. You can choose a Landline or VoIP line as the primary line.
VoIP line and
indicating a landline.
Note: For detailed instructions on making calls using the primary or secondary line,
Choosing VoIP or Landline
To set the primary line for your handset do the following:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony Settings, and press OK z.
Aastra MBU 400 User Guide
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select Primary line, and press OK z.
5. Choose Landline or VoIP line, and press OK z.
Choosing SIP Account
If you have more than one registered SIP account, you can choose which to use for
outgoing calls when VoIP is selected.
To set the SIP account for your handset to use for outgoing VoIP calls do the
following:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony Settings, and press OK z.
4. Select VoIP line, and press OK z.
5. Choose one of the registered accounts listed (SIP1, SIP2, and so on) and press
OK z.
Specifying Call Groups
If you have more than one handset, you must specify from which account or accounts
each handset receives calls. To change this you use the Call Groups settings.
To specify which accounts a handset receives calls from, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony Settings, and press OK z.
4. Press OK z.
All nicknames for the VoIP accounts you subscribe to are listed, in addition to the
landline account.
5. Clear any accounts you do not want the current handset to receive calls from, and
then press OK z.
Changing the Display Contrast
The brightness and contrast of the handset display can be changed as required for
your operating environment.
To change the display contrast:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System settings, and press OK z.
4. Select Handset settings, and press OK z.
5. Select Display Contrast, and press OK z.
36
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Use the navigation keys to move the center bar higher or lower to adjust contrast,
and press OK z.
Note: To restore the contrast to the default settings, from the Display Contrast screen
press the Restore softkey or from the Main Menu press 555, and then press the Yes
softkey.
Setting Do Not Disturb
You can set your phone to send incoming calls directly to voicemail (or a busy signal
if voicemail is not enabled) when you don’t want to be interrupted. When Do Not
Disturb (DND) is enabled, DND appears in the handset idle screen as shown.
Handset 1
DND
01:55PM
08/05/08
Call Log
Options
To enable or disable Do Not Disturb (DND) do the following.
1. From the idle screen, press the Options softkey.
2. Select DND and press OK z.
3. Select Enabled or Disabled and press OK z.
4. Press the red key
to exit.
CLR
Setting Call Waiting
You can set your phone to alert you when another call comes in during an active call
using the call waiting feature. You can then choose to answer the new call (leaving the
original call on hold). Call waiting can be turned off for important calls you don’t
want interrupted.
To enable or disable call waiting do the following.
1. From the idle screen, press the Options softkey.
2. Select Call Waiting and press OK z.
3. Select Enabled or Disabled and press OK z.
4. Press the red key
to exit.
CLR
Setting Audio
The Aastra 420d handset has a variety of audible indicators, ranging from incoming
call rings to keypad button sounds. All sounds can be turned off or customized
through the handset menu.
Aastra MBU 400 User Guide
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Handset
All handset sounds can be reset to the default values in a single step, along with the
display contrast and other customizable handset settings.
To reset all audio settings on your Aastra 420d handset to default values do the
following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System settings, and press OK z.
4. Select Handset Settings, and press OK z.
5. Select Reset handset, and press OK z.
6. Confirm the reset by pressing the Yes softkey when prompted.
Changing the Ringer Melody
You can specify a ringer melody for each type of call that you receive, to easily
distinguish between VoIP, landline, and intercom calls.
To change the ringer melody do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Ringer Melody, and press OK z.
5. Select the type of call for which you want to specify a ringer melody, and press
OK z. Valid selections are VoIP, Landline, and Intercom.
6. Select a ringer melody from the list to assign to the selected type of call.
You can scroll through the list of melodies using the navigation keys and can hear a
sample of the assigned melody by pressing the Play softkey. For available
melodies, see the table below.
7. Press OK z.
Ringer Melodies
Apache I
Apache II
Apache III
Classic
Classic twist
Marimba
NeoRetro
Rhythm chords
Classic rise
Changing the Ringer Volume
You can increase or decrease the ringer volume on a handset.
To change the ringer volume do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
38
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select Audio settings, and press OK z.
4. Select Ringer volume, and press OK z.
5. Use the navigation keys to adjust the volume, and press OK z.
Changing the Message Tone
You can set a tone that notifies you of a message waiting on your phone. You can also
disable message tones if required.
To set a message tone on your phone do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Message tone, and press OK z.
5. Select a tone from the list that notifies you of messages on your phone.
You can scroll through the list of tones using the navigation keys and hear a sample
of the tone by pressing the Play softkey. To disable message tones, select Silent.
For available tones, see the table below.
6. Press OK z.
Message Tones
Base ramp
Crazy echo
Echo
Little bell
X-low
Silent
Changing the Keypad Sound
When you press the keys on the keypad, a default tone is audible. You can change this
tone or disable it if required. To change the keypad sound:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Keypad sound, and press OK z.
5. Select a sound from the list that you want to hear when you press the keypad.
You can scroll through the list of sounds using the navigation keys. To disable
keypad sounds, select Silent.
6. Press OK z.
For available sounds, see the following table.
Keypad Sounds
Silent
Ditter
Dimp
Pip
Doomp
Aastra MBU 400 User Guide
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Advisory Tones
Advisory tones warn you that something is about to happen or is happening. There are
three advisory tones you can enable or disable individually. By default all advisory
tones are enabled.
To set Advisory Tones on the handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Advisory tones, and press OK z.
5. Select the type of tone you want to enable or disable by pressing the OK z key.
For available sounds, see the table below.
Advisory Tone Meaning
Battery Alert
Range Tone
Confirmation
The batteries must be recharged.
The handset is out of range of the gateway.
You have saved or deleted an entry, or made a selection.
Enabling/Disabling Silent Mode
You can enable or disable a silent mode on the phone. When disabled, all ringer
melodies, tones, confirmation sounds, and advisory tones are disabled. To enable/
disable silent mode:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Silence, and press OK z.
5. Select Silent on to disable all sounds on the phone. Select Silent off to hear all
sounds as you use the phone.
6. Press OK z to save the setting.
Note: You can also enable or disable the silent mode from the idle screen by pressing
the “#” key, and pressing the Silence on softkey or Silence off softkey as required.
Setting Your Phone to Vibrate
You can select from different vibrator modes which vibrates the phone with an
incoming call. You can choose between vibrating only, vibrating and then ringing,
and vibrating as well as ringing.
To set your phone to vibrate do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Audio settings, and press OK z.
4. Select Vibrator Mode, and press OK z.
40
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select a vibration mode to use when your phone receives an incoming call. Valid
values are Vibrator off, Vibrate then ring, Vibrate only, Vibrate and ring.
6. Press OK z to save the setting.
Changing Emergency Line Settings
The default setting of emergency calls is over the landline (the LINE port on the
gateway). Check that you have a working landline connection for emergency calls. If
you are using VoIP calls exclusively you should change the emergency call setting to
a registered SIP account.
Note: It is recommended that you check with your System Administrator for the
method of routing emergency calls in your network.
To change the emergency line setting on your handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony Settings, and press OK z.
4. Select Emergency line
5. Select from Landline, SIP1, SIP2, etc.
6. Press OK z for the change to take affect.
To make emergency calls:
• Enter the emergency number for your geographical location, and then press the
R
green key
.
Note: Changing your primary line settings does not change your emergency line
setting.
Aastra MBU 400 User Guide
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Making and Answering Calls
The MBU 400 System allows you to make both Internet and landline calls. Landline
calls are calls made over the Public Service Telephone Network (PSTN) just like a
regular phone. All outgoing calls (except emergency calls) are Internet calls by
default, unless you specify otherwise. All emergency calls default to the landline. (If
you don’t have a landline connected, you must change the emergency line setting. See
The following sections describe how to make and answer Internet, landline, and
intercom calls with the MBU 400 System.
VoIP Calls
To make internet calls on your Aastra MBU 400 phone, you must have registered an
account on the MBU system through either the handset, Web UI, or configuration file.
This may have been done for you by your System Administrator. If there are no VoIP
accounts in the system, you will not be able to make internet calls, and attempts to do
so will result in a red IP icon
on the handset display. For more information see
Administrator Guide, or contact your system administrator.
When you make and receive Internet phone calls, the following icons display:
Entering or editing a number
Dialing or ringing
Active Call
Incoming Call
Making a VoIP Call (over the Internet)
If your primary line is set as VoIP, do the following to make a VoIP call:
1. In Idle mode, enter the number you want to dial.
R
2. Press the green key
.
If your primary line is set as Landline and you want to make a VoIP call, do the
following:
1. In Idle mode, enter the number you want to dial.
2. Press the Options softkey.
3. Select Call on VoIP, and press OK z.
The phone dials the number as a VoIP call and displays the IP dialing icon.
42
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Landline Calls
To make landline calls on your Aastra MBU 400 phone you must have a telephone
line connected to the MBU base unit through the LINE port, and PSTN calls must be
enabled by the system administrator. If landline calls are disabled, you may not see
any of the landline options on your Aastra 420d handset. If landline calls are enabled
but no telephone line is connected to the system, landline calls will not connect to a
dialtone. For more information see the Aastra MBU 400 Administrator Guide or
contact your system administrator.
When you make and receive landline calls, the following icons display:
Entering or editing a number
Dialing or ringing
Active Call
Incoming Call
Making a Landline Call
If your primary line is set as Landline, do the following to make a landline call:
1. In Idle mode, enter the number you want to dial.
R
2. Press the green key
.
If your primary line is set as VoIP and you want to make a landline call, do the
following:
1. In Idle mode, enter the number you want to dial.
2. Press the Options softkey.
3. Select Call on landline, and press OK z.
Intercom Calls
You can register up to 8 handsets with the same gateway, and you can have up to 8
different VoIP accounts provided they belong to the same Internet Telephony Service
Provider. However, you can only have 4 active calls at a time: 3 Internet calls and 1
landline call.
Note: If you use Call Groups, you should only include up to 6 handsets in a Call
Group, because only 6 handsets at a time can receive incoming calls.
If you have more than one handset you can make intercom calls and transfer calls
between handsets. You can answer incoming calls on any of the registered handsets,
and if you reject a call on one handset you can still answer the call on another
registered handset. By default the Contacts List and Call Log are shared between all
handsets. To make the Contacts List or Call Log private instead of shared, contact
your System Administrator or see the Aastra MBU 400 Administrator Guide.
Aastra MBU 400 User Guide
43
Download from Www.Somanuals.com. All Manuals Search And Download.
When you make and receive intercom calls between handsets connected to the same
gateway, the following icon displays:
Dialing or ringing
Active Call
Incoming Call
Making an Intercom Call
1. In Idle mode, press OK z to display the Main Menu.
2. Select Intercom and press OK z.
Your handset lists other handsets registered with your gateway.
3. Select a handset from the list to call, and then press the green key
R
.
Calling All Handsets
You can make a call to all handsets connected to the same gateway, and then connect
to the first handset to answer the call.
To make a call to all handsets do the following.
1. In Idle mode, press OK z to display the Main Menu,
2. Select Intercom, and press OK z.
3. Select All handsets, and press OK z.
The first handset to answer the call receives the call.
Calling from the Contacts List
You can call contacts entered in your Contacts List using a VoIP line or Landline.
Since contacts may have more than one number listed, the number set as the default is
dialled unless you specify otherwise.
Calling a Contact on the Primary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. To
To call a contact in the Contacts List using your primary line and dialing the default
number for that contact, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
R
3. Select a contact from the Contacts List to call, and then press the green key
The phone dials the default phone number assigned to that contact.
.
44
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to dial one of the other numbers for the contact instead of the default
number, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select a contact from the Contacts List to call, and press OK z.
4. Select a phone number from the list of numbers for that contact, and then press the
R
green key
.
Calling a Contact on a Secondary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. When
you make a call out, you can choose not to use the primary line setting.
To call a contact in the Contacts List using a line of your choice, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select a contact from the Contacts List to call, and press the Options softkey.
4. Select "Call on landline" or "Call on VoIP", and press OK z.
The default number associated with the contact you selected is dialed.
Calling from the Call Log
You can call numbers listed in your Call Log using a VoIP line or Landline. Numbers
can also be edited before dialling using the Options softkey from the Call Log screen.
Calling from the Call Log on the Primary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. To
To call from an entry in the Call Log using your primary line, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Call Log
and press OK z (or In Idle mode, press the Call log softkey).
R
3. Select the number you want to call, and then press the green key
.
Aastra MBU 400 User Guide
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling from the Call Log on a Secondary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. When
you make a call out, you can choose not to use the primary line setting.
To call a number in the Call Log using a line of your choice, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Call Log
and press OK z (or in Idle mode, press the Call log softkey).
3. Select the number you want to call, and then press the Options softkey.
4. Select "Call on landline" or "Call on VoIP", and press OK z.
The phone dials the number you selected.
Calling Using Redial
Redialing on a Primary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. To
To call using redial on the primary line do the following.
1. In Idle mode, press the Options softkey.
2. Select Redial, and then press OK z.
The most recently dialed number displays.
R
3. Press the green key
to call the number.
Redialing on a Secondary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. When
you make a call out, you can choose not to use the primary line setting.
To redial a number using a line of your choice, do the following.
1. In Idle mode, press the Options softkey.
2. Select Redial, and then press OK z.
The most recently dialed number displays.
3. Press the Options softkey.
4. Select "Call on landline" or "Call on VoIP", and press OK z.
R
5. Press the green key
to call the number.
46
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling Using Speeddial
Speeddialing on a Primary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. To
To call using a speeddial key on a primary line, do the following.
Note: You must preconfigure the speeddial keys before using these procedures. To
57.
1. In Idle mode, press the speeddial key assigned to the contact you want to call.
R
2. Press the green key
.
Speeddialing on a Secondary Line
Your primary outgoing line uses either the internet for VoIP calls, or a landline. When
you make a call out, you can choose not to use the primary line setting.
To call using a speeddial key and a line of your choice, do the following.
Note: You must preconfigure the speeddial keys before using these procedures. To
57.
1. In Idle mode, press the speeddial key assigned to the contact you want to call.
2. Press the Options softkey.
3. Select "Call on landline" or "Call on VoIP", and press OK z.
R
4. Press the green key
.
Answering Calls
Your handset allows you to turn on and off auto answer features, such as answering a
call when removed form the charging cradle, or connecting to incoming calls when
any key is pressed.
Answering a Call
To answer a call from the handset do the following.
1. Pick up the handset
R
2. Press the green key
.
Note: If the handset has auto answer enabled and is in the handset cradle, simply
picking up the phone will answer the call.
Auto Answer Mode
In auto answer mode your handset can answer a call automatically when you pick it
up from the charging cradle. If the phone is not in the charger, you must still press a
key to answer a call.
Aastra MBU 400 User Guide
47
Download from Www.Somanuals.com. All Manuals Search And Download.
To enable or disable auto answer mode do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony settings, and press OK z.
4. Select Answer Mode, and press OK z.
5. Select Auto answer, and press OK z.
6. Navigate to Enabled or Disabled, and press OK z to select.
Any Key Answer Mode
You can choose to answer incoming calls by pressing any key, using the any key
answer setting.
To enable or disable any key answer mode do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select Telephony settings, and press OK z.
4. Select Answer Mode, and press OK z.
5. Select Any key answer, and press OK z.
6. Navigate to Enabled or Disabled, and press OK z to select.
Caller ID
When you receive an incoming VoIP call, the Caller ID always displays. Usually
Caller ID also displays on incoming landline calls, but some telephony providers may
require that you subscribe to a Caller ID service. If the caller is stored as a contact, the
contact name displays instead of the Caller ID. If the caller has blocked display of the
number, no Caller ID displays.
48
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Emergency Calls
The default setting of emergency calls is over the landline (the LINE port on the
gateway). Check that you have a working landline connection for emergency calls. If
you are using VoIP calls exclusively you should change the emergency call setting to
a registered SIP account.
Note: It is recommended that you check with your System Administrator for the
method of routing emergency calls in your network.
For more information on setting the emergency call line, see Changing Emergency
To make emergency calls:
• Enter the emergency number for your geographical location, and then press the
R
green key
.
R
When you make emergency calls, always press the green key
regardless of
whether your emergency calls are routed via a landline or over the Internet.
IMPORTANT: You cannot make emergency calls in the following situations:
• Firmware update is in progress
• Handset batteries are drained
• Power failure
• Handset is out of range of the gateway
Aastra MBU 400 User Guide
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Calls
The MBU 400 offers standard call handling features whether connected through a
landline or a VoIP internet line. Intercom calls (between handsets on the same
gateway) also have several call handling options.
Placing a Call on Hold
You can place an active external call on hold if required. When a call is on hold, the
“Call held” message displays at the top of the phone’s screen and the active call icon
turns yellow as shown below. The caller on hold hears music playing until
reconnected as an active call.
VoIP call on hold
Landline call on hold
To place a call on hold do the following.
1. During an active call, press the Hold softkey.
2. Press the Back softkey or the red key
to return to the call.
CLR
Calling with a Call on Hold
You can make a call while a second call is on hold. When a call is on hold and you
connect to a second call the active call icon is yellow and blue as shown below (or
yellow only for intercom calls). The caller on hold hears music playing until
reconnected as an active call.
VoIP call with a call on hold
Landline call with a call on hold
Intercom call with a call on hold
To make a call while leaving a call on hold do the following.
1. Place the active call on hold if you haven’t already done so (press the Hold
softkey).
2. Enter a number or use the Options softkey to find an Intercom, Contact, or Call
Log number.
R
3. Press the green key
to complete the call.
50
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
When the active call has disconnected or you have ended the call pressing the red
key , you are left with a call on hold.
CLR
4. Press the red key to return to the call on hold.
Swapping Calls
While on an active call with a call on hold you can swap calls, switching which call is
on hold.
To make the call on hold active and leave the active call on hold do the following.
1. Press the Options softkey.
2. Select Swap calls and press OK z.
Conferencing Calls
While on an active call with a second call on hold, you can connect to both calls at
once by conferencing the three calls together.
To connect to both calls do the following.
1. Press the Options softkey.
2. Select Conference and press OK z.
Transferring a Call
While on an active call with another call on hold, you can transfer the active call to a
for details.
Transferring to the Call on Hold
While on an active call with another call on hold, you can transfer one call to the
other.
To transfer an active call to a call on hold do the following.
1. Press the Options softkey.
2. Select Transfer to and press OK z.
The active call and call on hold connect, and your phone disconnects.
Muting/Unmuting a Call
You can mute/unmute active calls if required. When a call is muted the bottom left
softkey label reads Mute off, and although you can still hear the call, no one else
connected to the call can hear you.
To mute or unmute a call do the following.
1. During an active call, press the Mute softkey.
2. Press the Mute off softkey to unmute the call.
Aastra MBU 400 User Guide
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring Calls
You can transfer calls from your handset to other handsets registered with the same
gateway, or to other destinations on the VoIP or landline network.
Transferring to another Handset
You may want to transfer an active call to another headset connected to the same
gateway.
To transfer a call to another handset through the intercom system do the following.
1. During an active call, press the Hold softkey.
2. Press the Options softkey.
3. Select Intercom, and press OK z.
4. Select a handset to transfer the active call to, and press OK z.
5. When the other handset answers, press Options.
6. Select Transfer and press OK z to transfer the call.
Transferring to a VoIP or Landline:
You may want to transfer an active call to another number outside of your gateway.
To transfer a call to a number you enter do the following.
1. During an active call, press the Hold softkey.
2. Press the Options softkey.
3. Select Transfer, and press OK z.
4. Enter the number to transfer the call to.
R
5. Press the green key
to connect the call on hold to the number you entered.
Transferring to a Contacts List Number:
You may want to transfer an active call to a number in your Contacts List.
To transfer a call to a number in your Contacts List do the following.
1. During an active call, press the Hold softkey.
2. Press the Options softkey.
3. Select Transfer, and press OK z.
4. Press the Contacts softkey.
5. Scroll through the contacts list and select the number you want, then press the
Select softkey.
R
6. Press the green key
to connect the call to the contact you selected.
52
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ending Calls
Press the red key
, or place the handset in the charger. The handset displays the
CLR
call terminated icon, and then returns to the idle state screen.
VoIP call terminated
Landline call terminated
Intercom call terminated
Aastra MBU 400 User Guide
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Calls
Contacts List
All handsets connected to the same gateway can have a shared Contacts List. Before
entering personal contacts into your handset you should check whether your System
Administrator has configured a "private" or "public" Contacts List.
The Contacts List on your phone is empty by default. You can enter new contacts in
the list as required. The features of the Contacts List allow you to enter a name and
multiple numbers for each contact, as well as entering them in a contact group and
assigning a special ring tone. Each contact entry has the following information
associated with it (scroll down on the handset display to see everything).
(home number)
(mobile number)
(work number)
(other number)
Groups
Ringer melody
Note: To add a contact to a group, a group must already exist on your phone. See
The Contact screen also provides an Options softkey that allows you to perform
additional tasks in the Contacts List.
Option
Description
Call on landline
Allows you to place a call from a contact in the list, over a
landline. For more information about calling from the
Call on VoIP
Allows you to place a call from a contact in the list, over
VoIP. For more information about calling from the Contacts
Add contact
Allows you to add new contacts to the Contacts List. See
Edit contact
Allows you to edit contacts in the Contacts List. See Editing
Delete contact
Delete all contacts
Allows you to delete a contact from the Contacts List. See
Allows you to delete all of the contacts from the Contacts
List.
54
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Speeddial
Description
Allows you to add a selected contact to a specific speeddial
key. Available speeddial keys are 1 through 9. The
speeddial can be used by pressing the applicable key on the
phone’s keypad. You can also use this option to delete a
contact from a speeddial key. See Creating a Speeddial for a
Groups
Allows you to add, edit, delete, and assign ring melodies to a
Adding a Contact
To add a contact to the contacts list do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Press the Options softkey.
4. Select Add contact, and press OK z.
5. Press the Edit softkey, enter a name for this contact, and press OK.
When entering the name, press the * key to toggle the input modes. The current
input mode displays in the upper right corner of the screen. Press the Options
softkey to select Insert symbol if required.
6. Scroll to the type of number you want to add, and press OK z.
For each contact, you can assign the following phone numbers:
• Home number
• Cell number
• Business number
• Other number
7. Enter the phone number and press OK z.
8. Press the Save softkey to save the contact.
Editing a Contact
To edit an existing contact, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact you want to edit.
4. Press the Options softkey.
5. Select Edit contact, and press OK z.
A. To edit the name of the contact, scroll to the name and press the Edit softkey.
Edit the contact name as applicable.
B. To edit a number for the contact, scroll to the number and press the Edit
softkey. Edit the number as applicable. Press the Options softkey to set the Number
Type (Home, Mobile, Work, Other), set the number to be used as the Default
number, or place a Pause after a digit to pause between digits when dialing.
Aastra MBU 400 User Guide
55
Download from Www.Somanuals.com. All Manuals Search And Download.
C. To edit the ringer melody for the contact scroll down to Ringer melody and
press the Edit softkey. Scroll to the melody you want and press OK z to select.
Press the Back softkey to return to the contact entry.
6. Press OK z twice.
7. Press the Save softkey, and then press the Yes softkey at the save prompt.
Deleting a Contact
To delete a contact from the contacts list, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact you want to delete.
4. Press the Options softkey.
5. Select Delete contact, and press OK z.
6. Press the Yes softkey at the delete prompt.
Deleting All Contacts
To delete all contacts in the handset list, do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Press the Options softkey.
4. Select Delete all contacts, and press OK z.
5. Press the Yes softkey at the delete prompt.
Changing the Default Number for a Contact
The first number you save for a contact is automatically the default number. If you’ve
created a speeddial for a contact, for example, it is always the default number that is
dialed. You can change the default number for a contact as required.
To change the default number for a contact:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact for which you want to change the default number.
4. Press the Options softkey.
5. Select Edit contact, and press OK z.
6. Select the number you want to use as the default number for this contact, and press
the Edit softkey.
7. Press the Options softkey.
8. Select Default from the list of options, and press OK z.The number is now set as
the default for this contact.
9. Press the red key
to return to the contact.
CLR
56
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Press the Save softkey to save the setting, and press the Yes softkey at the save
prompt.
Creating a Speeddial for a Contact
You can create a speeddial to use for a specific contact in your Contacts List allowing
you to call the number quickly.
To create a speeddial for a contact:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact for which you want to create a speeddial, and press the Options
softkey.
4. Select Speeddial, and press OK z.
5. Select a speeddial key (from 1 through 9) to assign to the contact.
6. Press the Add softkey to add the contact to that speeddial key.
The speeddial is immediately applied.
7. Press the red key
to exit.
CLR
Note: To call a speeddial entry press the speeddial number and then press OK z.
Note: In the speeddial screen, to replace an existing entry select the speeddial entry
you want to replace, and press the Replace softkey. To delete a speeddial key, scroll to
the speeddial you want to delete and press the Delete softkey.
Groups of Contacts
Adding contacts to groups allows you to view pages of entries by group, simplifying
looking people up in a large Contacts List. You can also assign ring tones to groups of
contacts, helping you identify incoming calls.
Creating a Contact Group
Before you can add a contact to a group, you must create the empty group. Each
group has its own page in the Contacts List accessed using the right and left
navigation keys.
To add a group to your Contacts List do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Press the Options softkey.
4. Scroll down to select Groups and press OK z.
5. Press the Options softkey again.
6. Select Add group and press OK z.
7. Enter the name for your new group, and press OK z.
8. Press the Yes softkey when prompted to save.
Aastra MBU 400 User Guide
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding a Contact to a Group
1. In Idle mode, press OK z to display the Main Menu.
2. Select Contacts
c
and press OK z.
3. Select the contact to add to a group and press the Options softkey.
4. Scroll down to Edit contact and press OK z.
5. On the Contacts page scroll past the icons to Groups and press OK z.
6. Select the group or groups you want this contact added to using the OK z key.
7. Press the red key
to return to the contact page.
CLR
8. Press the Save softkey to save your changes to this contact, pressing the Yes
softkey when prompted.
Call Log
All handsets connected to the same gateway can have a shared Call Log. You can
check whether your System Administrator has configured a "private" or "public" Call
Log, or use your handset to check your call log for calls received by other handsets.
The call log keeps track of all your incoming and outgoing calls. It consists of four
pages or screens that you can scroll through using the navigation keys on the handset,
including a page of all calls, and then lists by category. The following icons apply to
calls in the Call Log.
Missed calls
Incoming calls
Outgoing calls
The call log stores up to 30 numbers. For each call the call log keeps track of the
number, the date and time of the call, and the type of call: incoming, outgoing, or
missed. If the caller’s name and number is stored in the Contacts List, the caller’s
name displays. A number or name is only listed once, but all missed calls are counted
so you can see how many times the same caller has tried to reach you.
Viewing Entries in the Call Log
To view entries in the Call Log:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Call Log
and press OK z (or in Idle mode, press the Call log softkey).
3. Use the up and down navigation keys to scroll through the names and numbers on
each page.
4. Use the right and left navigation keys to scroll through each page (All calls, Missed
calls, Incoming calls, Outgoing calls).
58
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Use the Options softkey on each page to perform additional tasks as described in
the following table.
Option
Description
Add as contact
Allows you to add the selected number to the Contacts List.
Append to contact Allows you to append the selected number to an existing
Contacts List entry.
Call on landline
Call on VoIP
Edit for call
Delete
Dials the selected number using the landline.
Dials the selected number using a VoIP line.
Allows you to edit the selected number before dialling.
Allows you to delete to selected number from the Call Log.
Delete List
Allows you to delete all numbers on the current page from the
Call Log. (For example this option will delete all missed calls if
you are on the missed calls page.)
Voicemail
To receive voicemail messages on your phone, voicemail service must be provided by
a local mail server on your network or by your Internet Service Provider. Check with
your System Administrator for more information about your voicemail service.
If you have voicemail on your network, you can receive voicemail messages if your
phone is not answered after several rings or if Do Not Disturb is set on your phone.
To access your voicemail messages:
1. In Idle mode, press OK z to display the Main Menu.
2. Select Messages
and press OK z.
3. Depending on your mail server setup, select Landline or VoIP, and press OK z.
4. Select a voicemail and press the Play softkey to listen to your message.
Aastra MBU 400 User Guide
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Features
This section describes other tasks you can perform, if required, on the MBU and the
Aastra 420d Handsets.
Resetting the MBU
In order for handsets to register with the MBU you must press the RESET button on
the rear of the MBU. Each time you reset the MBU, the handsets must re-register.
Make sure handsets are within range of the MBU to register properly.
Note: When you reset the MBU, the MBU waits until active calls have been
completed on the handsets before starting the reset process. If a registered handset is
off during an MBU reset, it reconnects when turned on as long as the MBU was not
factory defaulted.
To reset the MBU:
• Press and release the RESET button on the rear of the MBU (do not hold it down)
On the front of the MBU, POWER lights steadily during a reset and I-NET flashes.
When the reset is complete I-NET lights steadily, indicating the MBU is ready to
use.
Note: Check to be sure all handsets are registered (or reconnected) properly with
the MBU after the reset is complete.
Manually Registering/De-registering a Handset
Handsets will usually register without any action on your part if they are close to the
MBU 400 after a reset. If required, you can manually register and deregister a
handset. Make sure your handset is within range of the MBU.
To register or deregister the handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System settings, and press OK z.
4. Select Handset settings, and press OK z.
5. Select Register handset or Deregister handset and press the Yes softkey at the
prompt.
If registering, the handset prompts to be placed in its charger cradle so auto-
registration can occur.
Listing all Registered Handsets
To view a list of all registered handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System settings, and press OK z.
4. Select Handset settings, and press OK z.
60
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select Handsets, and press OK z.
All registered handsets are listed.
Updating the MBU 400 System Firmware
To ensure that your MBU 400 System has the latest features installed, we recommend
that you update the firmware once you have configured and set up the phone.
Updating the Firmware
When new software is available the handset display reads, “New firmware available.”
To update the firmware from the handset do the following.
1. In Idle mode, press OK z to display the Main Menu.
2. Select Settings
and press OK z.
3. Select System settings, and press OK z.
4. Select Firmware update, and press OK z.
The gateway proceeds to download the latest firmware from the configuration
server and updates the gateway and the handset when successful.
The update time varies depending on the size of the update and the speed of your
Internet connection. Handsets in the MBU 400 system can take 10 minutes each to
update fully. During the update process the following steps are listed in the display:
Getting gateway
Updating gateway
Getting handset
Updating handset
Once a step is complete, a green checkmark appears next to the step. When the
entire update has been successfully completed, the display reads Upgraded to
<version number>.
Note: In some cases the handset may repeat the handset update. Ensure that the
handset update has been completed (to 100%) at least once, then reset the MBU
400 base unit.
Note: While the update is in progress you cannot receive incoming calls or make
calls, including emergency calls, on the phone. Also note that we recommend you
do not reset the gateway during the installation process.
Changing Internet Settings
Through the handset you can access the Internet Settings menu. The settings located
here are administrator settings, and should be set by your System Administrator. For
more information see the Aastra MBU 400 Administrator Guide.
Aastra MBU 400 User Guide
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The following is a list of solutions to the most common issues that you may
experience when you install and use the MBU 400. Most of the problems you can
easily solve yourself, whereas others require that you contact your service provider.
To view the most recently updated troubleshooting information, go to
Issue
Causes
Solution
The handset keeps repeating the When you launch the upgrade
First ensure that the handset update has
been completed (to 100%) at least once.
Then reset the MBU 400 by pressing the
RESET button on the side of the base
unit.
checking step of the handset
update.
process the first time, the handset
update may loop.
The handset display is black.
Handset is in power saving mode.
Batteries are drained.
Press any key.
Charge the batteries.
Power is not turned on.
Check that the batteries are inserted with
the plus and minus ends facing the
correct way. Press and hold the red key
.
CLR
The handset does not charge.
The charger is not powered.
Check that the power cord is connected
properly to the charger, and that power is
turned on.
Batteries are not inserted
correctly.
Check that the batteries are inserted with
the plus and minus ends facing the
correct way.
The handset registration failed,
and the status indicator on the
display is black.
Handset is out of range of the MBU. Move the handset closer to the MBU,
place it in the charger, and reset the
MBU.
The display reads, "Searching for Handset is out of range of the MBU. Move the handset closer to the MBU.
Gateway" or "Registering to
Gateway" without registering
successfully.
MBU is not powered.
Plug MBU into a power outlet. (If
possible, a continuous power outlet.)
Access codes don’t match.
Change the handset access code to
match the gateway access code. (If you
don’t know the gateway access code, it
can be reset by your System
Administrator.) Once the access codes
match, reset the gateway to initiate
handset registration mode.
The POWER indicator on the MBU MBU is not powered.
is not lit.
Check that the MBU power cord is
connected properly, and that the adapter
is plugged into a power outlet. (If
possible, a continuous power outlet.)
The I-NET indicator on the MBU is The Ethernet cable is not
Check that the Ethernet cable between
the WAN port on the MBU and the LAN
port on your modem or router is
connected properly.
not lit.
connected.
The router or modem is not
powered.
Turn on the power to the modem or
router.
The MBU cannot retrieve an IP
address.
In Internet settings, check that the IP
mode corresponds to the IP mode of
your Internet connection.
62
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Issue (Continued)
Causes (Continued)
Solution (Continued)
There is no audio when I make
Internet calls.
The router blocks audio.
Use port forwarding. Check your router’s
user manual to see how to configure port
forwarding.
I cannot make landline calls.
The landline cable is not connected. Check that the landline cable between
the Line port on the MBU and the
telephone wall outlet is connected
properly.
The landline is out of order.
The country setting is wrong.
Contact your landline provider.
I cannot receive landline calls.
I cannot make Internet calls, the
Check that you have chosen the country
that you are in. Open the System
settings menu, choose Country
selection, and then choose the country
that you are in.
The configuration of the phone is
Check that you have configured your
For more information, contact your
Internet Telephony Service Provider or
your System Administrator.
VoIP indicator on the MBU is not not complete.
lit, and the right status indicator
in the upper left corner of the
display is black.
The MBU has not been reset after
you saved the configuration.
Reset the MBU and allow the MBU 2
minutes to log in at your Internet
Telephony Service Provider.
The router uses port forwarding.
Check that you have configured your
router so that it always assigns the same
IP address to your phone’s MAC address
when using port forwarding. Otherwise
incoming traffic is probably not forwarded
to your phone. For more information,
check your router’s manual.
The router blocks Internet
telephony.
Use port forwarding. The default SIP port
is 5060, and the default RTP port is
5004. Ensure that your router always
assigns the same IP address to your
phone when using port forwarding.
For more information, check your
router’s manual.
The router firmware needs updating. Check your router’s user manual to see
how to update the firmware.
When I make Internet calls, the
sound quality is poor.
There is too much simultaneous
data traffic on your broadband
connection.
a) Reduce the amount of traffic on your
broadband connection.
b) Sign up for a Quality of Service
agreement with your broadband
provider.
c) Order a connection with higher speed
from your broadband provider.
Your Internet Telephony Service
Provider’s Quality of Service is
Contact your Internet Telephony Service
Provider regarding ensured voice
based on a “best efforts” rather than prioritization across the network.
a guaranteed voice priority method.
Aastra MBU 400 User Guide
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Issue (Continued)
Causes (Continued)
Solution (Continued)
I cannot make Internet calls, but it The MBU is not logged in at the
Check that all cables are connected
worked yesterday.
Internet Telephony Service Provider. properly, and check that power is turned
on, and then reset the MBU.
The router is turned off.
The SIP server is down.
Turn on the router.
Contact your Internet Telephony Service
Provider.
The Internet connection is down.
Contact your broadband provider.
How do I determine the software I need to know the software version a) Press Volume-Up button on the left
version of my Handset?
currently installed on my MBU 400. side of the registered 420d handset to
display the system status.
b) Scroll down to see the Version SW:
xx.xx field.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Aastra Telecom warrants this product against defects and malfunctions during a one
(1) year period from the date of original purchase. If there is a defect or malfunction,
Aastra Telecom shall, at its option, and as the exclusive remedy, either repair or
replace the MBU 400 at no charge, if returned within the warranty period.
If replacement parts are used in making repairs, these parts may be refurbished, or
may contain refurbished materials. If it is necessary to replace the MBU 400, it may
be replaced with a refurbished MBU 400 of the same design and color. If it should
become necessary to repair or replace a defective or malfunctioning MBU 400 under
this warranty, the provisions of this warranty shall apply to the repaired or replaced
MBU 400 until the expiration of ninety (90) days from the date of pick up, or the date
of shipment to you, of the repaired or replacement set, or until the end of the original
warranty period, whichever is later. Proof of the original purchase date is to be
provided with all MBU 400s returned for warranty repairs.
Exclusions
Aastra Telecom does not warrant its MBU 400 to be compatible with the equipment
of any particular telephone company. This warranty does not extend to damage to
products resulting from improper installation or operation, alteration, accident,
neglect, abuse, misuse, fire or natural causes such as storms or floods, after the MBU
400 is in your possession.
Aastra Telecom shall not be liable for any incidental or consequential damages,
including, but not limited to, loss, damage or expense directly or indirectly arising
from the customers use of or inability to use this MBU 400, either separately or in
combination with other equipment. This paragraph, however, shall not apply to
consequential damages for injury to the person in the case of MBU 400s used or
bought for use primarily for personal, family or household purposes.
This warranty sets forth the entire liability and obligations of Aastra Telecom with
respect to breach of warranty, and the warranties set forth or limited herein are the
sole warranties and are in lieu of all other warranties, expressed or implied, including
warranties or fitness for particular purpose and merchantability.
Warranty Repair Services
Should the set fail during the warranty period;
In North America, please call 1-800-574-1611 for further information.
Outside North America, contact your sales representative for return instructions.
You will be responsible for shipping charges, if any. When you return this MBU 400
for warranty service, you must present proof of purchase.
After Warranty Service
Aastra Telecom offers ongoing repair and support for this product. This service
provides repair or replacement of your Aastra Telecom product, at Aastra Telecom's
option, for a fixed charge. You are responsible for all shipping charges. For further
information and shipping instructions;
In North America, contact our service information number: 1-800-574-1611.
Outside America, contact your sales representative.
Note: Repairs to this product may be made only by the manufacturer and its
authorized agents, or by others who are legally authorized. This restriction applies
during and after the warranty period. Unauthorized repair will void the warranty.
Aastra MBU 400 User Guide
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
F
L
G
H
M
handset
N
O
I
input
P
intercom
IP
K
68
Aastra MBU 400 User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
R
S
V
VoIP
W
SIP
T
U
time and date
Aastra MBU 400 User Guide
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Aastra Telecom will not accept liability for any damages and/or long distance charges, which result
from unauthorized and/or unlawful use.
While every effort has been made to ensure accuracy, Aastra Telecom will not be liable for technical
or editorial errors or omissions contained within this documentation. The information contained
in this documentation is subject to change without notice.
All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|