USER’S MANUAL
L19W761 / L22W761
Thank you very much for choosing the Envision Series LCD TV.
We recommend that you take a few minutes to read carefully through this manual
before installing and using the TV. Please keep this manual in a safe place for
your future reference.
www.AOC.com
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR SAFETY
Before operating the TV please read this manual thoroughly. This manual should
be retained for future reference.
FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTICE
1. The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. It is the responsibilities of the
user to correct such interference.
WARNING:
To prevent fire or shock hazard, do not expose the TV to rain or moisture.
Dangerously high voltages are present inside the TV. Do not open the cabinet.
Refer servicing to qualified personnel only.
SAFETY: Lamp Disposal
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE
INFORMATION, CONTACT THE ELECTRONIC
INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS AND REMINDERS
Place unit on even surfaces.
Don't place the TV in confined spaces
or in a box when using it.
Unplug immediately if is malfunction Unplug immediately if other foreign
like no picture, no video/audio,smoke materials are put inside TV box or if
and bad odor from TV.
the TV fell down.
Don't throw any object inside the TV
box like metals or other flammable Prohibit/Avoid opening TV cabinet
materials.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remember to unplug the AC cord Avoid direct sunlight, dusty, high
from the AC outlet before cleaning. Do humidity and smoky areas.
not use liquid cleaners or aerosol
cleaners to clean the display.
Make sure to unplug the unit when not Call service personnel to clean the
in use for a long period of time (days). internal part of the TV once a year.
Do not cover or block any vents and Do not place the display near water,
openings. Inadequate ventilation may such as bathtub, washbasin, kitchen
shorten the life of the display unit and sink laundry tub, swimming pool or in
cause overheating.
a damp basement.
Notice for Remote Controller
Avoid Dropping
Avoid Liquids
Avoid Aerosol Cleaners
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and third grounding prong. The wide blade or third
prong is provided for your safety. When the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. The TV should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into apparatus,
the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
16. This product may contain lead or mercury. Disposal of these materials may
be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries
17. Damage Requiring Service – The appliance should be serviced by qualified
service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked
change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
18. Tilt/Stability – All televisions must comply with recommended international
global safety standards for tilt and stability properties of its cabinets design.
ꢀ
Do not compromise these design standards by applying excessive pull
force to the front, or top, of the cabinet, which could ultimately overturn
the product.
ꢀ
Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
19. Wall or Ceiling Mounting – The appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
20. Power Lines – An outdoor antenna should be located away from power lines.
21. Outdoor Antenna Grounding – If an outside antenna is connected to the
receiver, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides
information with respect to proper grounding of the mats and supporting
structure grounding of the lead-in wire to an antenna-discharge unit, size of
grounding connectors, location of antenna-discharge unit, connection to
grounding electrodes and requirements for the grounding electrode. See
Figure below.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the
CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!
22. Objects and Liquid Entry – Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the power cord!
1. Install the base stand; place the TV on a solid surface.
Min
1 m
Ensure that the TV is placed in a position to allow free flow of air. Do not cover
the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall
not be exposed to dripping or splashing.
2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at
the back of the TV set.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied
(Type AA 1.5V).
4. Power:
Insert the power cord in the wall socket having an AC power supply.You can
, means the TV
the LED color is Green
see LED states at the front panel. If
set is power on. If the LED color is
standby state.
amber, which means this TV set is
in
5. Turn on the TV:
Push the POWER key on the Remote control or the control knobs on right of TV.
The TV will be power-on and the user can see the display on the screen after a
few seconds .
POWER key
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PERIPHERAL CONNECTION GUIDE
AC POWER
Once your equipment is connected, use the following procedure to view the input
signal:
Press the source button on the remote controller to select the relevant source to
view. (ex: Press VIDEO button to select “Video1 Composite Rear” if you have
connected a DVD player to Video1 Composite socket.)
"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC."
Note: The MUTE key on the remote control works on both TV internal speaker
and the earphone output.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION INSTRUCTIONS
TO USE THE PANEL CONTROL
VOL : Press to increase the sound volume level.
VOL : Press to decrease the sound volume level.
CH : Press to select the next higher Program number.
CH : Press to select the next lower Program number.
Menu key: Press to open or exit the OSD menu.
1
2
3
4
5
VOL
VOL
CH
CH
MENU
key: Press to select the input source.
Input
6 INPUT
Power key: Press to turn on / off (standby) the TV set.
(Please re-turn on TV after the Power-ON status LED had
changed to the orange color and finished flashing.)
7 POWER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TO USE THE REMOTE CONTROL
“0 ~ 9 /- number”
Press to enter TV channel number to
select channel (Press ‘-’ to indicate
choosing the sub-channel).
“POWER”
Press to power ON/OFF (standby) TV.
(Note:1.TV is never completely power off
unless physically unplugged.
2.Press to turn on TV after the power
on status LED had changed to the
amber color and stopped flashing. )
“MENU”
Press to open or exit menu.
“VOL- / VOL+”
Press + or - to adjust the volume.
“MUTE”
Press to set TVsound mute ON/OFF.
“CH- / CH +”
Press + or - to browse through the TV
channels.
“MTS/SAP”
Press to activate the NTSC TV sounds,
such as: Stereo, SAP or Mono tone.
“
”,“ ”,“＜”,“＞”,“OK”
“PRE CH”
Press to display the previous TV.
Press to adjust the various function
items on the menu.
“WIDE”
Press to choose the display aspect as:
Normal, Wide, Zoom or Cinema mode.
“INFO”
Press to show the information about the
input source
、TV channel、display
resolution and current time.
“Exit”
Press to exit menu or OSD.
“VIDEO”
repeatedly to choose S-Video/
Press
“FAV”
Composite source mode (Video 1 ~ 2).
Press to display the favorite TV channel.
(After setting the favorite TV channel on
main menu.)
“SLEEP”
Press to set a time period (off/5min/15min
30min/45min/60min/90min/120min/180min/
“PC”
240min)
after which the TV should
Press repeatedly to choose VGA or
switch
itself to standby mode.
HDMI source mode (Video 4 ~ 5).
“COMP”
Choose Component
source mode (Video 3).
“V-CHIP”
Press to lock unlock Parental Control
/
temporarily. (After setting the restricted
table of MPAA or TV Rating.)
“FREEZE”
Press to freeze the displayed picture
“TV”
Press to choose ATSC/NTSC TV source
mode.
“CC”
Press repeatedly to turn on/off CC or CC
on when mute.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TO USE THE MENUS
1. Press the MENU button to display the main menu
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu.
4. Press the OK button to enable/disable the function.
5. Press the MENU or EXIT button to exit the menu.
Press the MENU button to enter the main OSD (On Screen Display). Adjust the
items including Setup menu, Video menu, Audio menu and Feature menu.
However, some function items in the menus may only be enabled in the particular
source modes.
SETUP MENU
The Setup menu in TV mode shows as below. In others source modes, the Setup
menu only shows Menu Language and Aspect Ratio items.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. DTV Signal: Show the intensity of the received DTV signal.
3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and
then store in the channel table. In channel scan process, the OSD can
display the number of channels which had been found.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Add on Ch search:Add channels which are new found.
5. Manual Channel Set: Show the channel setup table. User can choose to display
the ATSC or NTSC TV channels and then edit (add/delete) the channel numbers.
Channel Labels: Show the NTSC or ATSC TV channel label menu for user
6.
modifying channel labels specifically.
7. Menu Language: Select the menu display language. (English /Spanish /
French)
8. Aspect Ratio: Select the display aspect ratio. (Normal / Zoom / Wide / Cinema)
9. Favorite Channel Mode: when favorite channel mode on user can edit
favorite channel table in favorite channel set option.
VIDEO MENU
The Video menu in most source modes shows as below. It provides several video
adjustment items for user fine tuning the video display. Only in VGA source
modes, the Video menu simply provides Contrast, Brightness, Back light and
Settings (Preset) items.
1. Contrast: Video contrast adjustment, the tuning range is 0 ~ 100.
2. Brightness: Video brightness adjustment, the tuning range is 0 ~ 100.
3. Sharpness: Video sharpness adjustment, the tuning range is -50 ~ 50.
4. Color: Video color chroma adjustment, the tuning range is 0 ~ 100.
5. Tint: Video tint adjustment, the tuning range is R50 ~ G50.
6. BackLight: Back light strength adjustment, the tuning range is 0 ~ 10.
7. Settings: Restore the default video settings.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO MENU
The Audio menu in TV mode shows as below. It provides audio adjustment for
user to modify the audio setting. Except in ATSC TV mode, some audio
adjustment items for user to modify the audio setting. Excepting in ATSC TV
mode, the Audio Language option is disable in others source modes. The audio
language setting is only available in ATSC TV source.
1. Audio Language: Change the audio language setting on ATSC TV programs.
The number of the supported audio languages depends on the ATSC TV
programs.
2. Bass: Bass tone adjustment, the tuning range is 0 ~ 63. (The default state is
enabled)
3. Treble: Treble tone adjustment, the tuning range is 0 ~ 63. (The default state is
enabled)
4. Balance: Audio balance adjustment, the tuning range is L31 ~ R31.
5. Digital Audio Output: Digital audio output format selection, user can choose
RAW (default) or PCM format.
6. TV Speaker: Choose to turn on / off the TV internal speaker. The digital audio
output signals、earphone output signals and the composite L/R audio output
signals will not be turn-off even though the TV speaker is off. The default
setting is On.
7. Settings: Restore the default audio settings.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURE MENU
The Feature menu in TV mode shows as below. It provides certain optional
control functions such as time set, sleep timer, video noise reduction,
parental control (V-chip) and close caption style setting. This menu gives users
the most flexibilities to satisfy their generally demands. According to the various
requirements in different source modes, certain features should be hidden
(disable) on the menu. The details footnotes will be described clearly below.
1. Time Set: Set current time. This sub-menu includes Time Set Mode ,Time
. [Time Set mode]:
【Time Zone】item provides user to set current time zone,
Zone and Time items
user can choose Auto or Manual.
such as: Pacific
、
provides
【Time】item
Alaska
、
Hawaii、Eastern、
Central and Mountain.
.
user to set the time clock and it only enable while the time set mode set manual
.
2. Sleep Timer: Enable or disable the TV standby timer. User can set the TV
standby timer as off / 5 min / 10 min / 15 min / 30 min / 45 min / 60 min / 90 min /
cursor leaving
120 min / 180 min / 240 min. Timer starts to count down after
and the cursor
the sub-menu. (At the moment, the item shows 『** min Left』
highlights on the Feature icon.)
3. Advanced Video Menu: Provide the Noise Reduction setting
Color
、
Temperature and 3D Y/C filter, Dynamic Contrast options for enhancing video quality.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
【
Noise Reduction】gives four NR effect degrees, such as: Low、Mid、High and Off.
The default setting is
.
off
provides On / Off switches. The default setting is On.
Color Temp gives three color temperature modes as: Normal
Cool. The default mode is Warm. o
【
【
3D Y/C】
】
、Warm and
【
Setting】
restores the default advanced video option settings.
【
Dynamic contrast
】
provides On / Off switches. The default setting is Off.
4. Password Set: Change the 4-numeral parental control password. Three steps
are required for changing the password: Enter Old Password -> Enter New
Password -> Confirm New Password. Note: This item is only available in TV,
Composite and S-Video source modes. The default password is
『0 0 0 0』.
5. Parental Control: provide the parental Control (V-chip) function setting. Before
entering the Parental Control sub-menu, user has to key in the password first. Then
enter the Parental Lock item, User can modify the restricted table about MPAA or
TV Rating respectively. While exiting the sub-menu, the parental control function is
working. The inhibitive channels or source signals can be un-lock through pressing
the V-CHIP key on the remote control and then key in the correct password. Note:
This feature is only available in TV, Composite and S-Video source modes. (The
default password is: 0 0 0 0.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Digital Captions: Select the close caption options ( Service 1-6, Text 1-4 and
CC 1-4) in digital TV mode. When select service 1 to service 6 you can
modulate parameters in the Digital Close Caption.
7. Digital Closed Caption: Provide numerous options for setting the close caption
style. In the sub-menu.
【Style】
item can be set as Automatic or Custom mode.
If Custom mode is selected, user can modify the detail styles described below.
The setting
OSD. Note:
result will be shown immediately on the bottom side of the sub-menu
This feature is only available in Digital TV (ATSC) mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
【Size】: Digital close caption font size, which can be set as Small、Normal or
Large.
【Font】: Digital close caption font style, which can be chosen as Default or
Font 1 ~ 7.
【
Text Color
】
: Giving Red / Green / Blue / Yellow / Magenta / Cyan / Black / White
Colors.
【Text Opacity】: Giving Transparent / Translucent / Solid / Flashing modes.
【Background Color】: Giving Red / Green / Blue / Yellow / Magenta / Cyan / Black /
White Colors.
【Background Opacity】: Giving Transparent / Translucent / Solid / Flashing modes.
【Edge Effect】: The text edge effects, which gives None / Raised / Depressed /
Uniform / Left Shadow / Right Shadow modes.
【Edge Color】: The colors of text edge effects, which provides Red / Green / Blue
/ Yellow / Magenta / Cyan / Black / White Colors.
8. Component Set: This option only shows and is available in component mode,
which provides fine tuning component display, such as: 【H-Position】、
【V-Position】and【Phase】. All these items are giving the tuning range from
0 to 100.【Setting】item providesthe default componentsetting values restoring.
Component setting-720x480i@30/29.97Hz
H-Position
V-Position
Phase
Setting
Preset
To Move
To Select
To Exit
9. VGA Set: This option only shows and is available in VGA mode, which provides
fine tuning VGA display, such as : 【H-Position】、【V-Position】、【Clock】
and【Phase】. All these items are giving the tuning range from 0 to 100.【Setting】
item provides the default VGA setting values restoring.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS
Care of the screen
Do not rub or strike the screen with anything hard as this may scratch, mar, or
damage the screen permanently.
Unplug the power cord before cleaning the screen. Dust the TV by wiping the
screen and the cabinet with a soft, clean cloth. If the screen requires additional
cleaning, use a clean, damp cloth. Do not use liquid cleaners or aerosol cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound, malfunctioning of your TV or even
damage to the TV, keep away your mobile telephone from the TV.
End of life directives
We are paying a lot of attention to produce environmentally friendly in green focal
areas. Your new receiver contains materials, which can be recycled and reused.
At the end of its life specialized companies can dismantle the discarded receiver
to concentrate the reusable materials and to minimize the amount of materials to
be disposed of.
Please ensure you dispose of your old receiver according to local regulations.
Regulatory Notices – Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
˙Reorient or relocate the receiving antenna.
˙Increase the separation between the equipment and the TV.
˙Connect the equipment into wall power outlet on a circuit different from that to
which the receiver is connected.
˙Consult the dealer or an experienced radio or television technician for help.
Modifications –
The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Our company. may void the user’s
authority to operate the equipment.
Cables –
Connections to this device must be made with shielded cables with metallic
RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian notice –
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Avis Canadian –
Cat apparel numerous de la classed B respected toutes les exigencies du
règlement sur le materiel brouilleur du Canada.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPECIFICATION_L19W761
NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may be added in
the future.
Television System:
NTSC standard
ATSC standard (8-VSB, Clear-QAM)
HDMI Terminals:
HDMI INPUT: Rear HDMI include 1 HDMI Input
HDCP compliant
EDID compliant
Suggested scan rates: 1080i, 720p, 480p, 480i
Viewable image size:
481mm diagonal
Channel Coverage:
VHF: 2 through 13
VGA Terminals:
VGA INPUT:
UHF: 14 through 69
CableTV:Mildband(A-8throughA-1,Athrough
Rear VGA include 1 D-SUB 15 Pin Input
E-EDID compliant
I)
Suggested scan rates: 640X480 /60Hz
800x600 /60Hz
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
1024X768 /60Hz
1440X900 /60Hz
Audio INPUT: Headphone Mini-jack for stereo (3.5Φ)
Power Source:
Video/Audio Output:
VIDEO: 1 V(p-p), 75 ohm, negative sync
AUDIO: 150 mV(rms)
AC power supply: 100V~240 V, 50/60 Hz
Power Consumption
≤ 55 W
Dimensions:
Include Stand:
477.9 mm(W) x 405.9 mm(H) x 209.0mm(L)
1 W in standby mode (power cord plugged in
and power OFF)
6.2 kg
Weight:
Audio Power
3 W + 3 W, Internal Speaker
Video/Audio Terminals:
Rear AV include 1 Group:
S-Video/Video/Audio Input
Wall Mounting: Optional
VESA
100 X 100 mm
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75
ohm
Supplied Accessories:
1pcs Power cord
1pcs Remote control
(with two AA alkaline batteries)
1pcs User manual
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms)
1pcs Signal cable
1pcs Pc Audio cable
Component INPUT:
Rear Component include 1 Groups:
Y : 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 150 mV(rms)
Suggested resolutions:1080i, 720p, 480p,
480i
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT SPECIFICATION_L22W761
NOTE:
*This model complies with the specifications listed below.
*Designs and specifications are subject to change without notice.
*This model may not be compatible with features and/or specifications that may be added in
the future.
Television System:
NTSC standard
ATSC standard (8-VSB, Clear-QAM)
HDMI Terminals:
HDMI INPUT: Rear HDMI include 1 HDMI Input
HDCP compliant
EDID compliant
Suggested scan rates: 1080i, 720p, 480p, 480i
Viewable image size:
558mm diagonal
Channel Coverage:
VHF: 2 through 13
VGA Terminals:
VGA INPUT:
UHF: 14 through 69
CableTV:Mildband(A-8throughA-1,Athrough
Rear VGA include 1 D-SUB 15 Pin Input
E-EDID compliant
I)
Suggested scan rates: 640X480 /60Hz
800x600 /60Hz
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
1024X768 /60Hz
1440X900 /60Hz
Audio INPUT: Headphone Mini-jack for stereo (3.5Φ)
Power Source:
Video/Audio Output:
VIDEO: 1 V(p-p), 75 ohm, negative sync
AUDIO: 150 mV(rms)
AC power supply: 100V~240 V, 50/60 Hz
Power Consumption
≤ 75 W
Dimensions:
Include Stand:
539 mm(W) x 447 mm(H) x 209 mm(L)
1 W in standby mode (power cord plugged in
and power OFF)
6.6 kg
Weight:
Audio Power
3 W + 3 W, Internal Speaker
Video/Audio Terminals:
Rear AV include 1 Group:
S-Video/Video/Audio Input
Wall Mounting: Optional
VESA
100 X 100 mm
S-VIDEO INPUT:
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75
ohm
Supplied Accessories:
1pcs Power cord
1pcs Remote control
(with two AA alkaline batteries)
1pcs User manual
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms)
1pcs Signal cable
1pcs Pc Audio cable
Component INPUT:
Rear Component include 1 Groups:
Y : 1V(p-p), 75 ohm, including sync.
Pr/Cr: ±0.35V(p-p), 75 ohm
Pb/Cb: ±0.35V(p-p), 75 ohm
AUDIO: 150 mV(rms)
Suggested resolutions:1080i, 720p, 480p,
480i
22
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE CALLING SERVICE
Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
Items to Check and Actions to follow
“Ghost ” or double image
*This may be caused by obstruction to the
antenna due to high rise buildings or
hills. Using a highly directional antenna
may improve the picture.
No power
No picture
*Check that the TV’s AC power cord is plugged
into the mains socket.
*Unplug the TV, wait for 60 seconds. Then re-
insert plug into the mains socket and turn on
the TV again.
*Check antenna connection at the rear of the
TV to see if it is properly connected to the TV.
*Possible broadcast station trouble. Try
another channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions setting. Some
TEXT modes could block the screen,
*Increase the VOLUME.
Good picture but no sound
*Check that the TV is not muted; press the
MUTE button on the remote control.
*Adjust the contrast, color and brightness
settings.
*Sometimes, poor picture quality occurs when
having activated an S-VHS camera or
camcorder connected and having connected
another peripheral at the same time. In this
case switch off one of the other peripherals
*Check the antenna connection
Good sound but poor color
Poor picture
Snowy picture and noise
Horizontal dotted line
*This may be caused by electrical interference
(e.g. hairdryer, nearby neon lights, etc.)
*Turn off the equipment.
Television not responding to
remote control
*Check whether the batteries are working.
Replace if necessary
*Clean the remote control sensor lens on the
TV.
*You can still use the buttons at the front of
your TV.
*Select the TV mode to be sure your remote
control is in the TV mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Audio / Video Inputs
Located on the rear and the front of the receiver these connectors (RCA phono
type plug) are used for the input of audio and video signals. Designed for use with
VCRs (or other accessories) in order to receive higher picture resolution and offer
sound connection options.
Menu
An on-screen listing of features shown on the TV screen is made available for
user adjustments.
MPAA
Motion Picture Association of America
Multichannel Television sound (MTS)
The broadcasting standard, which allows stereo sounds to be transmitted with the
TV picture.
Programming
The procedure of adding or deleting channel numbers into the TV’s memory.
In this way the TV remembers only the locally available or desired channel
numbers and skips over any unwanted channel numbers.
RF
Radio Frequency or modulated signal design used as the carrier for television
broadcasts.
Second Audio Program (SAP)
Another or additional audio channel provided for in the Multichannel Television
Sound (MTS) broadcast standard. A monaural soundtrack included within the
recorded or video signal (usually containing a second language translation for the
displayed program).
Sleep Timer
You can set a time period for which the TV will automatically turn itself off.
S-Video Input
You can connect your TV set to a high-resolution video source (such as Super
VHS video-cassette recorder, Laser Disc player and DVD Home Theater Set) in-
order to provide maximum consumer viewing satisfaction.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mount Bracket
(19”)
(22”)
1. Remove the four units M4.0 screws.
2. Remove the Base Ass’y.
3. Fasten four units M4.0 X 10mm screws to secure the wall mount bracket.
Note: If you want to wall mount the TV, for the safety of you and the appliance,
please use the correct hanging brackets. (Wall mounting brackets are not
included when you purchase the TV)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|