ALK Technologies GPS Receiver Symbian S60 User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome to CoPilot!  
Imagine…a CoPilot at your side that always  
GPS Accuracy  
knows where you are, where you’re going, and  
exactly how to get there. Now confidently drive  
anywhere while CoPilot, using the latest, most  
accurate GPS technology, shows you all the correct  
turns to take to reach your destination.  
The GPS signal CoPilot receives from the constellation of satellites has a  
rated accuracy of within 5 - 10 meters. This means that 95% of the time  
the reported location is within 15 - 30 feet of your exact position. If  
CoPilot initially places you on the wrong road (this happens only rarely),  
keep driving and CoPilot will automatically correct itself and find your  
proper position.  
Better yet, if you should miss a turn, encounter heavy  
traffic, or simply decide to go a different way, CoPilot’s dynamic directions  
automatically provide you with an updated route to your destination. Keep  
your eyes on the road and your hands on the wheel as CoPilot’s unique  
voice technology speaks the directions to you. In addition, detailed street  
maps show your passengers the current street location and the route to  
your destination.  
Occasionally, CoPilot’s GPS tracking will be less accurate or fail to work  
at all because your GPS receiver is unable to receive satellite signals.  
Heavy foliage, tall buildings, or any other structures obstructing  
communications will interfere with CoPilot’s ability to track your loca-  
tion. Like your car radio, GPS tracking can also be affected by weather  
conditions if severe. CoPilot will continue tracking as soon as adequate  
signals are available. Despite these limitations, you can expect CoPilot  
to provide you with useable and accurate information most of the time.  
CoPilot will alert you if accurate information is unavailable.  
About GPS Technology  
The Global Positioning System (GPS), developed by the U.S. Department  
of Defense, is a constellation of 24 satellites that orbit the Earth twice daily.  
Each satellite contains an atomic clock that is accurate to the nanosecond  
and constantly emitts radio waves toward Earth. GPS sensors (hardware  
devices for receiving data) can receive these signals from the satellites and,  
using their own internal clock, can calculate the amount of time it has taken  
for the signal to be received. GPS relies on the fact that radio waves travel  
at the speed of light to calculate distances, and the exact location of the  
sensor is figured by combining the data received from four satellites.  
CoPilot’s personal, portable GPS navigation system gives you the  
freedom to explore and the confidence that you’ll never get lost again!  
Safety Warning  
Always keep your hands on the steering wheel and eyes on the  
road when driving!  
Do not use this product in any way that interferes with safe and  
attentive operation of a vehicle. When used in a vehicle, do not place  
the GPS receiver, antenna, power supply, or your computer where it  
may strike the driver or passengers if the vehicle turns sharply or stops  
abruptly. This product is designed, manufactured, and intended as an aid  
to planning and navigating routes. The accuracy of the map data, driving  
directions, and GPS tracking system is insufficient for this product to be  
used for automated navigation or in any situation in which the failure  
of the product could lead directly to death, personal injury, or physical  
or environmental damage. The driver must remain alert at all times to  
actual road conditions and obey all posted signs and traffic regulations.  
Using the data from these four satellites, GPS is able to give you the latitude,  
longitude and elevation of your present location, and also your road speed  
and direction of travel on a route. Given the right conditions, a GPS sensor  
can identify your geographic position anywhere in the world within a few  
meters.  
How CoPilot Uses GPS  
CoPilot uses the GPS positional data that it receives from your hardware  
unit to display your current position on a map as you drive. This is called  
“tracking”. CoPilot also uses the GPS data it receives to guide you along  
a planned route if you enter a destination on your Smartphone. CoPilot  
guides you with audible prompts and on-screen directions as you drive.  
ALKTechnologies assumes no responsibility for any damage or  
injury resulting from the use of this product.  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your Smartphone  
Getting Started  
NOTE: If a Quickstart installation memory card was included with  
your purchase of CoPilot, you do not need to do this before installing.  
This User Guide includes complete instructions for installing your  
CoPilot software and using CoPilot on your phone to guide you to your  
destination or to plan trips.  
In order to successfully transfer data from your desktop or laptop PC to  
your mobile phone, you must have Nokia PC Suite installed on the PC.  
This software is necessary to connect the two machines and is provided  
by your phone manufacturer. You will need to have this software  
installed if:  
Requirements  
1) You are installing CoPilot Live using CoPilot installation CDs (rather  
than a Quickstart installation memory card);  
Desktop PC Requirements  
To install CoPilot on your desktop or laptop PC, you must have:  
• MicrosoftWindows 2000, ME, or XP  
• 400 MHz processor or better  
2) You need to download map data to your phone; or  
3) You need to transfer pictures or other files from your phone to your  
desktop or laptop PC.  
• 16X CD-ROM or better  
Follow the steps below to connect your PC and your mobile phone:  
• 128 MB of RAM and a hard drive with 1 GB of available disk space  
for map data  
1. Insert the Nokia PC Suite CD in your CD-ROM drive. Do not plug  
your phone into your PC until AFTER this software is installed on  
your computer.  
• Nokia PC Suite for transferring map data or other files to or from  
your mobile phone (supplied with your phone by Nokia)  
2. Follow the steps in the InstallationWizard that opens.  
Smartphone and GPS Requirements  
• Symbian S60 2nd Edition phone  
• Bluetooth GPS receiver  
3. Click Finish when the installation is complete.  
4. Plug the USB cable that came with your phone into a free USB port  
on your computer.  
5. Plug the other end of the cable into the Pop-port™ connector at the  
bottom of your phone.  
6. Turn on your phone. Your phone and computer are now connected.  
- 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing CoPilot  
Installing From a Quickstart Installation Memory Card:  
Installing From CD’s  
1. Set up your phone and charge the battery following the  
instructions in your phone’s manual.  
You can install CoPilot to your desktop or laptop computer using the  
CoPilot Live CD’s you received with your purchase.You can then use  
CoPilot’s extensive desktop trip planning software on your PC to  
generate routes and printable driving directions and maps. The desktop  
installation also provides the necessary files to install CoPilot Live on  
your phone from the desktop if you choose.  
2. You must set the correct date and GMT time on your phone for  
optimal GPS functionality.  
3. Your CoPilot Live satellite navigation software is supplied pre-  
loaded on a storage card. Insert your CoPilot storage card into  
the slot of your phone.  
Before installing, your desktop/laptop and Smartphone should both be  
turned on and the phone should be connected through either a USB or  
Serial port. You should also have the Nokia PC Suite software that came  
with your phone running on the PC.  
4. On your Smartphone, open the File Manager and navigate to the  
memory card.  
5. Select the .SIS file on the memory card and open it.  
6. Click ‘Yes’ to install on phone.  
To install, insert the CoPilot Live CD into your PC’s CD-ROM. An  
InstallationWizard will open. Follow the instructions to install the desk-  
top software. A CoPilot .SIS file will be placed in the CoPilot installation  
folder. To install CoPilot on your phone, double-click this file.  
7. If you receive a security warning, click ‘Yes’ to install anyway.  
8. Press ‘Yes’ when asked whether to ‘Install CoPilot Live?’  
9. Select ‘Install’.  
10. Select whether to install to the phone memory or the  
memory card. It is recommended to install on your phone  
memory for slightly faster performance.  
11. When the installation is complete, a CoPilot icon will be placed  
in the Menu screen on your phone.  
12. To open CoPilot, press the menu key on the phone, then find and  
select the CoPilot application in the Menu screen.  
13. You will be asked to activate CoPilot within 4 days the first time  
you open the application. Press Activate to activate now, or  
Exit to activate later  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Key Entry and Activation  
The first time you launch CoPilot on your phone you will be prompted  
to enter your product key.  
c. On a desktop/laptop go to the Internet site http://activate.alk.  
com and enter the information. You will be given an activation  
code.  
After entering your product key you will be asked to activate your  
CoPilot licence within 4 days. Press Options and select Automatic  
for automatic activation (requires that your phone is connected to the  
internet), Manual for manual activation (requires an internet-connected  
computer), Telephone to activate over the phone, or Cancel to  
activate later.  
d. Enter the activation code into the phone when prompted and  
select Next.  
e. Once complete, you will see the message ‘licence activated  
successfully’.  
f. Select Done. Activation is now completed.  
FourWays to Activate:  
1. Recommended:Automatic Activation using your phone’s  
Wireless Internet Connection  
3. Phone Activation  
a. Press Options > Telephone.  
b. You will be asked to choose your region.  
a. Press Options > Automatic.  
b. Enter your e-mail address and press NEXT. CoPilot will now  
c. Call the telephone number supplied in the next screen to contact  
a technical support representative at ALKTechnologies who can  
process your CoPilot activation.  
activate over the Internet.  
d. Once complete, you will see the message ‘licence activated  
successfully’.  
e. Select Done. Activation is now completed.  
2. Automatic Activation via an Internet-connected Desktop PC  
or Laptop  
Connect your Smartphone to an Internet-enabled Desktop or  
Laptop using the supplied Synchronisation cable. Make sure your  
desktop/laptop is connected to the Internet, then follow the steps  
outlined above.  
3. Manual Activation (requires an Internet-connected  
computer)  
a. Press Options > Manual.  
b. On the next screen you’ll see your Product Key and Licence ID.  
You need this information to manually activate CoPilot as follows:  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Setup  
WARNING:Your GPS receiver is temperature-sensitive. Never leave your  
mobile phone or GPS receiver in a closed vehicle that exceeds 140 F.  
GPSTroubleshooting:  
o
1. Unable to switch on Bluetooth  
Configuring the Bluetooth GPS Receiver:  
a. Close CoPilot by selecting ‘Exit’ from the Options menu.  
b. Switch your phone off and then on again using the power button.  
c. Restart CoPilot, and select GPS from the CoPilot Live screen.  
d. You will be asked to activate Bluetooth, press Yes.  
Once you have installed CoPilot Live on your phone, you will be prompted  
to set up your remote Bluetooth GPS receiver from the GPS Status screen.  
CoPilot uses the Bluetooth GPS receiver to enable you to obtain a GPS fix  
for CoPilot to calculate your route and provide navigation guidance.  
e. Scroll down to GPS Signal, press Options > Search for GPS.  
f. Bluetooth should now be switched ON and your phone should be  
connected. If not, see below.  
IMPORTANT NOTE: Please ensure that the correct date and GMT time  
are set on your phone before commencing with setting up your Bluetooth  
GPS receiver.  
1. Switch on your Bluetooth GPS receiver (slide the switch to 1). Green  
and blue lights should turn on if the GPS receiver is properly charged  
(see Troubleshooting, next page, on proper charging).  
2. Proper ChargingTechniques (IMPORTANT)  
The Bluetooth GPS only needs to be charge for a maximum of 1  
hour or until the Battery LED is off. Do not leave the Bluetooth  
GPS receiver connected to the charger at all times, as it will degrade  
the battery life and eventually drain the battery completely. Normal  
battery life is 8 hours.  
2. Open CoPilot. CoPilot will now check whether Bluetooth is switched  
on. If not, select Options >Turn On Bluetooth.  
3. Search for your GPS receiver. Select Options >  
Search for GPS. After a few minutes the  
system should display a list of Bluetooth devices.  
Your Bluetooth receiver will be identified by a code  
BTGPS xxxxx .  
3. ‘No devices found’ in search for GPS  
a. Close CoPilot by selecting ‘Exit’ from the Options menu.  
b. Ensure that your Bluetooth GPS receiver is switched ON: Switch  
the GPS receiver off and on. The green and blue lights will turn  
on if the GPS receiver is charged up and working properly.  
c. Restart CoPilot and select GPS from the CoPilot Live screen.  
d. Select Options > Search for GPS.  
4. Highlight the GPS receiver and press SELECT.  
The GPS screen should now change to ´GPS  
Signal: Found´ and the GPS information displayed.  
5. Select Done. Now you can enter a destination and start navigating!  
e. Your Bluetooth receiver should appear with the name  
‘BTGPS xxxx xxxx’.  
LED STATUS LIGHTS:  
Blue LED Light indicates the Bluetooth connection status.  
Flashing every 1 second: GPS was just powered on and waiting for a  
connection. Flashing every 2 seconds: GPS is connected to mobile phone.  
4. Unable to get a GPS Fix.  
If you can’t get a GPS signal after setting up your receiver, ensure  
that your Bluetooth GPS receiver is switched on, charged up, and  
working properly by switching it on and off. The green and blue  
lights will turn on if the GPS receiver is properly charged. To avoid  
unnecessary delays, make sure that your phone’s date and time are  
properly set.  
Green LED Light indicates GPS status.  
Light Constantly on: GPS was just powered on and attempting to acquire a  
GPS position. Light is Flashing: GPS has acquired a GPS position.  
Orange/Red LED Light indicates Battery status.  
Red Light Constantly on: Battery is Low. Orange Light is Constantly on:  
Battery is charging. No Light (off): Battery is fully charged.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Map Download to Your Smartphone  
(3) Download the Data:  
NOTE: If your CoPilot product came with a Quickstart installation  
memory card, you don’t need to download map data (it’s already on your  
Quickstart card). You can skip to Using CoPilot for Guidance, p. 14.  
NOTE: For more on data download options, see p. 10.  
(3a) Using a Storage Card Reader:  
To download map data from your Desktop PC or Laptop to your mobile  
device, you select the data to download from one or more regions that you  
specify in the CoPilot application on your desktop. It’s a simple process.  
See p. 7-10 for more detailed descriptions of the basic steps outlined below.  
1. Make sure the Storage Card for your Smartphone is inserted in the  
Storage Card Reader.  
2. Clicking the Download icon will take you to a screen  
where Available Area(s) for download are displayed on the left.  
To designate an area to include in the download, highlight it  
and then click on the right arrow button to move it to the  
Data Included inThis Download list on the right. To take an area  
off the list, highlight it and click the left arrow button.  
CoPilot gives you two options for downloading data:  
· Download directly to your Storage Card Reader — follow steps (1),  
(2), and (3a) below.  
· Download to a hard drive on your computer, then manually copy the  
data to your Smartphone Storage Card using Nokia PC Suite — follow  
steps (1), (2), and (3b) below.  
3. After confirming that the area(s) you would like to download are in  
the Data Included inThis Download list, click Download to complete the  
map data download process (see Data Download, p. 10).  
(1) Choose a Storage Location:  
4. Remove the Storage Card from the Storage Card Reader and insert  
it into the Smartphone. Your data is now ready to be used by CoPilot.  
1. Open the CoPilot application  
on your desktop/laptop, then click  
the Data DownloadWizard  
(3b) Using Nokia PC Suite  
1. Ensure that your Smartphone is connected to the desktop/laptop via  
Nokia PC Suite.  
icon in the sidebar on the left. Make sure  
your Smartphone is synchronized. CoPilot  
will scan your computer to detect which  
drive options are available.  
2. Clicking the Download icon will take you to a screen  
where Available Area(s) for download are displayed on the left.  
To designate an area to include in the download, highlight it  
and then click on the right arrow button to move it to the  
Data Included inThis Download list on the right. To take an area  
off the list, highlight it and click the left arrow button.  
2. Click on the Drive Name pick list that appears and select either the  
drive letter of your Storage Card Reader (if you are using one) or the drive  
letter of your Hard Drive (e.g. C). Click Next.  
(2) Select a Data Area:  
3. After confirming that the area(s) you would like to download are in  
the Data Included inThis Download list, click Download to complete the  
map data download process (see Data Download, p. 10).  
Select a data area using one of three methods (see Selecting a Data Area  
p. 7-9 for a description of each method):  
4. On the desktop, open Nokia PC Suite then click File Manager.  
Navigate to the drive letter you downloaded the data to. The data you  
downloaded will be in a folder named “CoPilot”. For example, if you  
chose Drive C, the data would be in the folder “C:\CoPilot\”.  
City Radius to select an area around a town or city;  
Map Area to select an area directly from the map;  
Trip to select a corridor along a route between two places.  
Region to select a whole region.  
5. Copy the CoPilot folder: right click on it and select Copy.  
6. In Nokia PC Suite, navigate to the Smartphone’s storage card. Right  
click on the storage card and select Paste to copy the folder.  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Data Area  
City Radius  
This method allows you to quickly select data in the shape of a circle  
surrounding any city on the map. In the Data DownloadWizard you  
type a city name and state/country abbreviation or postal code and  
enter the number of miles/kilometers you would like the radius to  
extend around the city, then click Next.  
TheWizard displays a map that shows the city and the radius you chose.  
At this point you can zoom the map in and out using zoom buttons and  
adjust the size of the data area by altering the radius of the circle.  
Follow these steps to download City Radius data:  
1. Click the City Radius icon in  
the Data DownloadWizard.  
After you specify a location where the data will be stored, you will be  
prompted to select a region on the map to download. CoPilot gives you a  
choice of four ways to select a data region, described on p. 7-9 below.  
Region  
2. Enter a City, Country  
or Postal Code, and a mile  
radius around the area that you  
would like to download. Click  
Next to verify that the area is  
correct.  
To download a whole CoPilot data region, click the Region option in the  
Data DownloadWizard, then select a region in the next screen and click  
Next.  
The region you select must be included in the region that was installed on  
your Smartphone (if not, a warning will appear and you won’t be able to  
proceed with the download). Region downloads generally take the longest  
amount of time, depending on the size of the selected region.  
3. Using the Data Download  
Wizard toolbar you can zoom  
in or out, change the radius, or  
go back to the previous screen.  
When you are satisfied with  
your selection, click Next.  
Note: CoPilot’s available  
memory calculations subtract  
a certain amount from the  
available memory on your  
storage card (if you are using  
one) to account for support files.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Name the selection, then  
click Next.  
2. Enter a City, Country or  
Postal Code (address optional)  
within the area that you would  
like to download. Click Next.  
5. You will return to the Data  
Selection menu where you can  
select another data area if you  
like, using any method. When  
you finish selecting data areas,  
click the Download icon and  
you will be taken to the final  
screen where you can build  
your download.  
3. Click and hold the left  
mouse button and drag the  
cursor to draw a box around  
a desired area. The size of the  
area will be displayed in the  
toolbar. Click Next.  
Map Area  
Note: CoPilot’s available  
memory calculations subtract  
a certain amount from the  
available memory on your  
storage card (if you are using  
one) to account for support  
files.  
This method of selecting data allows you to choose an area of data by  
drawing a box on the Data DownloadWizard’s map screen.  
In theWizard, you enter a city name near which you would like to select  
data, then click Next. The map will zoom to that location. Then you  
create a box around the desired area by clicking and dragging your mouse  
across the map. The street-level data within that box will be selected.  
You can zoom the map in and out using the zoom buttons and adjust the  
size of the data area by redrawing the box.  
4. Name the selection, then  
click Next.  
Follow these steps to download Map Area data:  
1. Click the Map Area icon in  
the Data DownloadWizard.  
5. You will return to the Data  
Selection menu where you can  
select another data area if you  
like, using any method. When  
you finish selecting data areas,  
click the Download icon and  
you will be taken to the final  
screen where you can build  
your download.  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trip  
This method of selecting data is by far the most customisable method.  
It allows you to run a trip and select street-level data specific to that trip,  
thereby avoiding unneeded data and saving valuable memory space.  
3. To search for a POI, click  
the Points of Interest tab, enter  
a City, Country or a Postal  
Code and click the Find button.  
Once the trip is run, the Data DownloadWizard automatically selects  
circles of data around your origin and destination, and a corridor of data  
along your route. You can then click Options to adjust the radius of the  
circles and the width of the corridor.  
(You can speed up your search  
by selecting a POI Category  
and/or Type.) Then highlight  
a selection on the list, click  
Select, then Add Stop to add  
the POI as a stop.  
TheTrip Itinerary for each trip you download will be stored on your  
Smartphone (see TripTransfer, p. 11). Multiple trips can be downloaded  
to the Smartphone for later use.  
Note: For a more detailed  
description of trip entry, open  
CoPilot Help from the desktop  
application (Help menu > Help  
Contents and Search).  
Follow these steps to downloadTrip data:  
1. Click the Trip icon in the  
Data DownloadWizard.  
4. When all your stops have  
been entered, click Select  
Data.  
2. Enter at least a start and  
end place for your trip. In the  
Cities and Addresses tab, type  
a City, Country or Postal  
Code and press <Enter>.  
Optionally, you can enter an  
address in the same way. Click  
the Add Stop button to add  
this place to your trip.  
By default a 20 mile (32  
kilometer) radius around  
all stops and a width of 4  
miles along the corridor  
which connects them will be  
highlighted. Note: CoPilot’s  
available memory calculations  
subtract a certain amount from  
the available memory on your  
storage card (if you are using  
one) to account for support  
files.  
You may enter one or multiple  
destinations. Use the buttons  
to the right of the Itinerary to  
zoom to a stop on the map,  
change the order of stops, or  
delete a stop.  
5. To customise these distances  
for any trip, click Options  
and type a distance in the  
appropriate box.  
- 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice that the amount of available map memory and the memory required  
for all the areas on the Included list is shown beneath the list. NOTE:  
CoPilot’s available memory calculations subtract a certain amount from  
your storage card (if you are using one) to account for support files.  
6. You will return to the Data  
Selection menu where you can  
select another data area if you  
like, using any method. When  
you finish selecting data areas,  
click Download. Trip itineraries  
that were created using the  
Trip download method will be  
transferred along with map data  
(see p. 11 for details).  
Check Include EU Highway Network to download CoPilot’s complete  
European Highway Network along with your data. This additional download  
requires approximately 71 MB of space on your Smartphone. When this  
network is loaded, major roads, cities, and some points of interest outside  
your selected data region will be shown on the map and you’ll be able to  
receive guidance as you drive anywhere in the continental United States.  
Data Download  
Check Download Favourites to download your Favourites list from the  
Trip Planner window on your desktop along with map data. These addresses  
will then be available as Favourites for trip entry on the Smartphone.  
When you’re ready to execute a download, theWizard will display a list  
of Available Area(s) for download on the left side of the window. To  
designate an area to include, click on it and then click on the right arrow  
button to move it to the Data Included inThis Download list. If you  
need to move an area off the Included list, click on it and use the left arrow  
button.  
Check Create QuickStart to download a QuickStart version of CoPilot  
along with the map data. If the CoPilot application file (.SIS file) was  
deleted from your phone’s memory card for any reason, the QuickStart  
version can be used to reinstall CoPilot on your phone. Once the .SIS file  
is downloaded, navigate to it using the File Manager or Explorer on your  
phone and press the scroll key to open it and install CoPilot.  
To delete an area from memory, click on it in the Available Area(s) list  
and click Delete below the list.  
IMPORTANT: Each data download overwrites any data that was  
previously downloaded to your hard drive or storage card reader.  
Therefore, your download must include all areas that you wish to have  
available on your Smartphone.  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POI Download Options  
Adding OV2 POI Sets  
When you download a data region from your desktop PC, you get all roads  
within that region. Also included are regional points of interest (POI) such  
as gas stations, hotels, restaurants, visitor attractions, etc.  
CoPilot supports OV2 POI files. You can copy any OV2 file into the  
CoPilot\Save folder on your storage card to get immediate access to the  
POIs it contains.  
CoPilot now lets you control the number and types of POI that get  
downloaded along with map data. You can save space on your Smartphone  
by eliminating categories of POI that you’re not interested in seeing.  
EXAMPLE: Copy an OV2 file named ‘Speedcams’ to Storage Card\  
CoPilot\Save. The next time you do a POI search you will see ‘Speedcams’  
as a POIType in the Custom Category.  
To select which POI categories you want, choose POI Download  
Options from the Edit menu in the desktop application or, when you  
first open the Data DownloadWizard, click the Options button in the  
Wizard. Check the categories you wish to select (click the plus sign next  
to each category to see the included sub-categories).  
Trip Transfer  
When you use the Trip download option, CoPilot transfers whole trips to  
your Smartphone. The trip you create, including its itinerary, is transferred  
along with the surrounding data corridor, and it becomes the current trip.  
Click Save Settings to save the set of categories you create. Click  
Restore Default to return to CoPilot’s default categories.  
The Trip download option creates a .TRP file that is placed in the  
Save directory in the CoPilot installation folder on your Smartphone.  
Subsequent downloads will add more .TRP files to this folder. The number  
of trips that may be stored is limited only by the available memory on your  
Smartphone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Importing Custom Places  
4. In the next screen you’ll see the  
data from your file sorted into  
columns. If the columns you see  
in the screen have not sorted  
the address data correctly, you  
need to indicate which delimiter  
CoPilot should recognize when  
it separates the fields in your file  
into columns. Each field — e.g.  
name, street address, city, state,  
etc. — needs to be separated by a  
delimiter such as a tab, semicolon,  
or comma. If your file uses a  
delimiter other than a comma, tab,  
or semicolon, click Other and  
type the delimiter in the box to  
the right. If the first row of your  
file consists of column headings,  
you should check Column  
CoPilot’s Custom Place ImportWizard enables you to import addresses  
from your Outlook Contacts database, an Excel file, or text file. (If you  
are using another type of database or contact manager, you can export  
your contacts/ locations to an Excel or text file before importing them  
into CoPilot.) These points are then added to CoPilot’s POI database in  
a category and type of your choice (the default category is “Custom”).  
Once in the database, they are displayed on maps as pushpins and  
included in search results when you search for points of interest on your  
Smartphone or in theTrip Planner window on your desktop/laptop.  
NOTE: CoPilot now allows importing of multiple POIs with the same  
name (e.g. an entire database of “Starbucks”).  
To access theWizard, choose Import Custom Places from the Tools  
menu in Planning Mode on the desktop, then follow the step-by-step  
instructions given by theWizard.  
Steps for Importing:  
1. In Planning Mode on your  
desktop/ laptop, choose Import  
Custom Places from the Tools  
menu to open the Import Custom  
PlacesWizard.  
headings in first row. Click  
Next when ready.  
5. Now, following the instructions  
on the screen, click each column  
heading and match the column  
headings with your data. To  
be accepted by CoPilot, each  
imported place must have at least  
four fields: Name, Address1,  
City, and State. Click Next  
when ready.  
2. Choose Import from Microsoft  
Outlook or Import from an  
existing file (this can be a .txt or  
an Excel file). Click Next.  
3. In the nextWizard screen, type  
the path to the file you want to  
import or Browse for it, and  
use the Category pick list to  
indicate a POI category for your  
imported places (by default they  
are assigned to “Custom”). You  
can also choose a Type from the  
pick list. To edit the type name,  
highlight it on the pick list and  
click EditType Name below.  
Click Next when ready.  
6. In the next screen, following the  
instructions, you can assign a name  
to the set of columns you just  
defined to save you time the next  
time you import addresses.  
To skip this step, uncheck Save  
the columns as a new set.  
Click Finish.  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing Custom Places  
After custom places have been added to the database, they can be edited  
at any time. Select Manage Custom Places from the Tools menu, then  
highlight the custom place you wish to edit, click Edit, and make your  
changes. Click Apply when finished.  
NOTE: By default, addresses entered as Custom Places are assigned to  
the Custom POI category. You can change this assignment at any time by  
selecting another Category from the drop-down pick list as you edit.  
7. When processing is finished, the Data Import Status window shows  
you how many places in your file were matched with addresses in the  
CoPilot database. A plus sign in the Accept column indicates a match.  
Places that failed to match appear in red and do not have a plus sign.  
8. To edit a failed or incomplete match, highlight it and click Edit (see  
Editing Custom Places, next page). POI addresses can also be edited after  
they are added to the database using the Custom Place Manager.  
9. When you are satisfied with the list of addresses, click Add to add  
these places to the CoPilot database.  
Options below the list let you 1) choose whether to add all addresses  
on the list to the database, or just those that were accepted, and 2)  
determine how CoPilot will handle any address that duplicates one  
already in the database.  
- 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using CoPilot for Guidance  
4. The Select Stop screen gives you eight ways  
In CoPilot’s Guidance Mode on your mobile phone, you will receive turn-  
by-turn route guidance information as you travel. For your safety, the  
SafetyView screen will hide maps when your speed exceeds 16 k.p.h. to  
avoid distractions.  
to enter a destination.You can:  
Step 4  
1 Enter a new Address  
2 Enter your Home address  
3 Enter your Work address  
4 Select a Favourite  
1. To launch CoPilot, press your phone’s  
5 Enter an Intersection  
6 Enter an Outlook Contact  
7 Search for a Point of Interest (POI)  
8 Pick From Map  
Menu key, then navigate to the CoPilot  
application in the Menu screen and press  
Step 1  
the scroll key  
to select.  
Press the scroll key  
on the option you want (options are described  
on the following pages).  
There’s no need to enter a starting location. CoPilot uses GPS  
positioning to determine your location automatically.  
When you have entered at least one stop in the GoingTo screen, you  
can select Drive and CoPilot will begin guiding you with on-screen and  
spoken directions.  
2. In the CoPilot Live screen, select GoingTo.  
If you take a wrong turn or decide to take a different route than the  
one CoPilot has generated, no problem! CoPilot will almost instantly  
automatically recalculate new directions from your current position.  
You simply won’t be able to get lost using CoPilot!  
3. Press the scroll key  
on <Add a  
Stop> in the GoingTo screen to enter a  
destination.  
Address Entry  
1. After opening CoPilot, press GoingTo  
and then <Add a Stop>. Then select  
Step 2  
Step 3  
Step 1  
Address in the Select Stop screen to enter  
a town or postal code and (optionally) a  
street address as a destination.  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. In the Address screen, enter a Street  
Name with or without a House Number,  
and a City. Scroll down to enter a  
3c. To display the latitude/longitude of any  
match, select Options > Details.  
Step 2  
Step 3  
Step 3a  
Step 3c  
Press Cancel to return to the Address  
Matches screen.  
Country or Postal Code — press left or  
right on the scroll key to scroll down or  
up the pick list of countries — then select  
Done to continue. NOTE: Street address  
entry is optional, if you like you can enter  
only a city-country or postal code.  
To return to the Select Stop screen to start  
over, select Back.  
3. The Address Matches screen will display a list  
of matches that were found in the CoPilot  
database. Highlight your choice and press  
the scroll  
key to continue.  
To return to the Address screen, select Back.  
4. You will see the destination you entered in  
3a. To see any match on the map, select  
the GoingTo screen.  
Step 4  
Options > Map.  
Press Drive to begin receiving guidance,  
then start driving!  
See Start Driving! on p. 21 for a  
description of CoPilot guidance screens.  
3b. In the map screen, to zoom your view of a  
place in closer or out farther away, press  
Options and select one of the zoom  
options.  
Step 3b  
- 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stop Menu Options  
In the GoingTo screen, press Options to access options that include  
adding, deleting, moving, editing, and optimising your stops.  
Select Mode to switch between Guidance,  
Walking, and Planning mode — see p. 28 for  
a description of each mode.  
To add another destination, choose Add Stop  
from the menu. (Another way to do this would  
be to simply highlight <Add a Stop> in the  
GoingTo list and press the scroll key  
.)  
Select Settings to change routing options  
— see p. 25-27.  
Select Delete to delete the highlighted stop,  
or Delete All to clear all stops from the list  
(you will be asked to confirm this action).  
Scroll down the menu to see these other  
options:  
Select Help and choose Help for on-screen  
instructions about basic CoPilot features.  
Select Actions > to access more stop options:  
> Move Up/Down — Change the order of  
stops on your trip by moving the highlighted  
stop up or down on the list.  
Choose About for CoPilot version  
information.  
ChooseWelcome to return to the initial  
CoPilot Live welcome screen.  
> Set AsWaypoint —Turn the highlighted  
stop into a waypoint. The purpose of  
waypoints is to guide your route along roads  
you prefer. See p. 24 for more on waypoints.  
To close CoPilot, choose Exit.  
Press Cancel at the bottom of the screen to  
close the menu.  
> Optimize Stops — Reorder stops on the  
list to achieve the most efficient route, keeping  
your final destination the same.  
> Map — See the highlighted stop on the map.  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Entering Your Home Address  
Entering Your Work Address  
To program your home address for quick trip  
To program your work address for quick trip  
entry, select Home in the Select Stop screen  
and enter your home address as you would a  
new address (p. 14). The next time you want to  
enter your home address as a stop, just select  
Home in the Select Stop screen and your  
address will be automatically entered.  
entry, select Work in the Select Stop screen  
and enter your work address as you would a  
new address (p. 14). The next time you want  
to enter your work address as a stop, just  
select Work in the Select Stop screen and your  
address will be automatically entered.  
To change your home address later, select  
Favourite in the Select Stop screen. Then  
highlight an address on the favourites list  
and press Options > Set as Home. If the  
address you want isn’t on the list, you’ll have to  
enter it first using the Address option in the  
Select Stop screen.  
To change your home address later, select  
Favourite in the Select Stop screen. Then  
highlight an address on the favourites list and  
press Options > Set asWork (you’ll need  
to scroll the menu to see this option). If the  
address you want isn’t on the list, you’ll have to  
enter it first using the Address option in the  
Select Stop screen.  
- 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Favourites  
Intersections  
Choose Intersections in the Select Stop screen to enter the  
intersection of two roads as a stop on your route. Intersections are  
entered just like addresses (see p. 14), except that instead of a house  
number you enter a “Street 1” and “Street 2”.  
CoPilot automatically places every stop you  
enter on a list of favourite places for future  
quick trip entry. To enter one of these  
favourites as a stop, select Favourites in the  
Select Stop screen. In the next screen, choose  
one of the places on the scrollable list, then  
press Select.  
MENU OPTIONS:  
Press Options at the bottom of the screen to  
access these options:  
Select — Select the highlighted favourite.  
Map — Zoom to the highlighted favourite.  
Details —View or edit address data for the  
highlighted favourite.  
Delete — Delete the highlighted favourite.  
Entering an Outlook Contact  
Delete All — Delete all favourites from your  
favourites list.  
®
CoPilot allows you to link directly to Microsoft Pocket Outlook to  
retrieve address information. Within moments, you can enter a contact’s  
home and/or work address as your destination.  
Set as Home — Set the highlighted favourite  
as your Home address for quick trip entry.  
Set asWork — Set the highlighted favourite  
as yourWork address for quick trip entry.  
To enter a contact, first select Contacts in  
the Select Stop screen. In the next screen  
you’ll see your list of contacts.  
To select a contact, enter the first few letters  
of the contact’s first or last name. The sub-  
menu will display matches. Highlight the  
contact you want, then press Done.  
NOTE: When the number of Favourites  
on your list reaches 50, each new address  
will replace the address that has been  
inactive for the longest period of time.  
Select Back to return to the Select Stop  
screen. To view or edit a contact’s  
address, select Details.  
To SaveYour Current Location As a Favourite:  
You must be receiving GPS data to save your current location as a  
favourite. In any display screen press Options, then select Actions >  
Save GPS Location.  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Finding Points of Interest  
CoPilot enables you to search for points of interest (POI) such as gas  
stations, hotels, restaurants, visitor attractions, etc. within the region for  
which map data was downloaded from your desktop/laptop computer.  
You can then choose a destination from the list of search results.  
From the Search Center pick list, choose an area for CoPilot to search  
(use the arrows). Options are:  
- Current GPS Position (search an area around your current location)  
- City or Postal Code (in the next screen, enter a city-country or postal  
code)  
Select POI in the Select Stop screen to search  
for Points of Interest.  
- Favourite (in the next screen, choose a location you recently entered  
as a destination)  
In the Directory screen, to narrow your search  
and cut down on the time the search takes,  
you can (optionally) type the first few letters  
of a place you have in mind in the Name field.  
- Contact (in the next screen, choose an address from your Contacts list)  
In the Directory screen you also have the  
option to choose a Category and Type  
of POI from the pick lists provided (use the  
arrows). Press the scroll key to see a pick list.  
Press Done to begin the search. A list of POI will be generated. To add  
a POI on the list as a stop, select Options > Select. Or you can press  
Options > Map to zoom to it on the map, > Details to see more address  
information, or Expand to expand your search to a wider area.  
- 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picking Stops From the Map  
CoPilot enables you to pick a stop off the map when you don’t know  
the exact address of your destination.  
4. With the cursor on the location you want  
to pick, press Select to add this place as a  
stop.  
Step 4  
1. Select Pick from Map in the Select Stop  
screen.  
Step 1  
5. You will be asked if you want to name this  
location. You can enter a name and press  
OK, or just press OK without adding a  
name. Either way, this place will be added  
to your list of stops.  
Step 5  
2. CoPilot will prompt you to enter a location  
on the map where you can start searching  
Step 2  
for the place you have in mind. Highlight one  
of the options, press Select, and enter any  
necessary information.  
3. CoPilot will zoom to the place you chose to  
start from, and a crosshair cursor will appear  
on the map. Use the Options menu to  
Zoom In or Zoom Out.  
Step 3  
The display of POI on the map can be  
toggled off using the Options menu if your  
map is too cluttered.  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start Driving!  
MapViews  
Once you have entered at least one stop in the Select Stop screen,  
you’re ready to start driving with CoPilot! You’ll receive turn-by-turn  
directions and maps to guide you safely to your destination. As you  
drive, CoPilot’s dynamic directions will instantly recalculate your route  
if you take a wrong turn or decide to go a different way. In addition,  
CoPilot can calculate a detour from your current position, giving you  
the option to accept the new route or to cancel it and return to your  
original route at any time. CoPilot speaks directions out loud to you,  
and also displays them on your Smartphone screen.  
The CoPilot map screen automatically displays when you are traveling  
at less than 16 k.p.h. or 1 kilometer before each turn. It combines a  
detailed map display with concise text instructions.  
In any of the three map views, your current GPS position is displayed  
and you are tracked in real time as you drive. To choose a map view,  
press Options >View and make your selection:  
Last Stop Map — Frames your current location up to the next turn  
on your route.  
There are three guidance screen views to choose from: 1) SafetyView,  
2) Map (three views), and 3) Itinerary. Press Options >View to  
change your view.  
Start Stop Map — Frames a close-up view of your current location.  
Trip Map — Frames your route from your current location to the  
next stop.  
SafetyView  
Zooming and ShiftingYour MapView  
The SafetyView displays a text-only screen when your speed  
exceeds 16 k.p.h. and is the recommended view for safe driving.  
CoPilot automatically switches to the map screen when you’re within  
1 kilometer of a turn or driving less than 16 k.p.h.  
To zoom your view of the map in or out, press Options and select  
Zoom In or Zoom Out. This action can be repeated until the  
minimum or maximum zoom level is reached.  
To navigate to another area of the map, use the scroll key on your  
phone as a navigation pad: press up, down, left, or right as many times as  
needed.  
The SafetyView screen can be customised to show your current road,  
nearest crossroad, nearest major road, nearest town, ETA, or speed  
— press the scroll key up or down to scroll through these options.  
NextTurn  
Instruction  
NextTurn  
Directional  
Arrow  
Your Current GPS  
Position  
CoPilot’s  
Calculated Route  
Distance to  
NextTurn  
Current Road  
(customisable,  
press the scroll key  
up or down)  
GPS Status:  
Green = 3D Fix  
Yellow = 2D Fix  
Red = No Fix  
Information Bar:  
Every 3 seconds,  
alternates between  
next turn, current road,  
and ETA/distance  
to next stop.  
GPS Status:  
Green = 3D Fix  
Yellow = 2D Fix  
Red = No Fix  
Live Network Connection  
EstimatedTime  
of Arrival (ETA)  
Live Network Connection  
Distance to Next Stop  
at next stop  
- 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trip Editing  
ItineraryView  
To make changes to your trip at any time from the guidance screens,  
press Options and choose EditTrip. This returns you to the GoingTo  
screen where all your stops are listed. Highlight a stop, press Options  
again, and select a trip editing option from the menu:  
Press Options >View to get to the trip Itinerary. The Itinerary is a  
scrollable set of driving directions for the current trip. Individual roads  
on your Itinerary can be avoided using the Options menu in this screen  
— highlight the road to avoid and select Options > Actions > Avoid  
Road. To cancel this setting, select Options > Actions > Cancel  
Avoid Road.  
Add a Stop Add a stop after the highlighted  
stop.  
Delete  
Delete the highlighted stop.  
Delete All Delete all stops on the list.  
Actions > Move Up: Moves the highlighted  
Distance  
stop up on the list.  
between turns  
Move Down: Moves the highlighted  
stop down.  
Arrows show  
direction of turns  
along route  
Roads for  
upcoming turns  
Set AsWaypoint: Turns the highlighted stop into a  
waypoint (see Getting ETA’s and Distances, p. 24 for a  
description of waypoints).  
Optimize Stops: Reorganizes stops in the most efficient  
order, keeping the last stop the same. This action is not  
reversible.  
Map: Zooms to the highlighted stop on the map.  
Mode >  
Opens the Mode menu — see p. 28.  
Settings The Settings menu lets you change routing, mapping, and  
guidance settings — see p. 25-27.  
(Scroll down to see more options)  
Help >  
Help: Accesses CoPilot Help topics.  
About: Shows CoPilot version number and copyright.  
Welcome: Returns to the CoPilotWelcome screen.  
Returns you to the guidance screen.  
Closes CoPilot.  
Back  
Exit  
- 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Options on the Road  
Calculating a Detour  
From any guidance screen, you can zoom your map view in and out, edit  
your trip, calculate a detour, save your location as a favourite, and more.  
Press Options and select any of the following options:  
If for any reason you find that you want to take an alternate route  
around a particular road segment — no problem! CoPilot can calculate  
a detour on command, tell you how much longer it will be, and then give  
you the option to accept the new route or cancel it and return to the  
original route at any time.  
Zoom In/Out In the map screen, zooms  
your view in/out.  
To have CoPilot generate a detour from any guidance screen, select  
Options > Actions > Detour. You will see the new route appear on  
the map (your old route will be drawn in blue). To reject the new route  
and return to the original route at any time, select Actions > Cancel  
Detour.  
View >  
Lets you change the guidance  
screen view. Choices are Safety  
View, Itinerary, or one of the map  
views (see p. 21).  
EditTrip Navigates to the GoingTo screen for  
trip editing (see p. 22).  
Actions > Detour/Cancel Detour:  
Calculates an alternate route, or cancels the detour that has  
been calculated and returns to the original route.  
Avoid Road/Cancel Avoid Road: In the Itinerary screen,  
this option will recalculate your route to avoid the road  
that is highlighted. Or cancel this action and return to the  
original route.  
Save GPS Location: Saves your current GPS location as a  
Favourite so you can enter it as a stop in the future.  
Pick Stop: Enables you to enter a stop by picking it directly  
from the map — see p. 20.  
Traffic > Displays real-time traffic information settings if this service  
is available in your region and included with your CoPilot  
purchase. See Real-TimeTraffic Information, p. 38-39.  
(Scroll down to see more options)  
Mode >  
Opens the Mode menu — see p. 28.  
Options > Opens the Options menu to change routing, mapping, and  
guidance settings — see p. 25-27.  
Help >  
Exit  
Displays CoPilot Help topics.  
Closes CoPilot.  
- 23 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Avoiding Roads  
Getting ETA’s and Distances  
To avoid an individual road and have CoPilot  
calculate another route around that road,  
you must be in the Itinerary screen. From  
there, find the road you want to avoid in  
the scrollable list and highlight it, then press  
Options and select Actions > Avoid Road.  
The estimated time of arrival (ETA) and distance to your next stop will  
always be shown at the bottom of the SafetyView screen. To bring up  
the SafetyView screen, enter one or more stops, press Drive, then  
select View > SafetyView.  
If your trip has multiple stops and you want to know the ETA for a  
destination that is not the next stop, designate the stops between your  
current location and the target stop as waypoints as follows:  
To cancel any road preferences that have been  
set and return to your original route, select  
Actions > Cancel Avoid.  
1) From any guidance screen press Options > EditTrip.  
2) In the GoingTo screen highlight a stop, then select Options >  
Actions > Set asWaypoint.  
Optimising Your Stop Order  
3) Repeat step 2 for all intermediate stops. When all intermediate stops  
have been changed to waypoints, the SafetyView screen will display  
the ETA to your final destination.  
To rearrange the stops on your trip in the most  
efficient order, in the GoingTo screen select  
Options > Actions > Optimize Stops. You  
must have at least three stops to optimise  
— the destination always remains the same.  
The waypoints you created can be easily changed back to stops —  
highlight each one and select Options > Actions > Set as Stop.  
Waypoints are not treated like stops in the Itinerary for your trip, their  
purpose is to guide CoPilot route calculations along roads that you  
prefer. On the Itinerary, a waypoint is distinguished by a round icon  
instead of the flag icon that appears next to a stop., and distance to the  
waypoint is not calculated.  
Saving a Current Location as a Favourite  
To save your current location as a  
Favourite, from any guidance screen  
select Options > Actions > Save  
GPS Location.  
ETA and Distance to Next Stop  
- 24 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Options  
Press Options in the  
GoingTo screen or  
any guidance screen,  
then select Settings  
to access a menu of  
CoPilot program options  
and settings.  
Routing  
Select Options > Settings > Routing.  
Options in the Routing screen are:  
VehicleType — Press to choose  
Automobile or RV. RV routes favor major  
roads and avoid urban areas, sharp turns and  
U-turns wherever possible. In the U.S. only, RV  
routing avoids 12' 6" height restrictions on  
highways.  
RoutingType — CoPilot’s Quickest  
routing type is based on the most practical  
route in terms of road quality, terrain, and  
urban/rural classifications. Shortest routing  
travels the least distance where possible while  
maintaining some level of practicality.  
GPS  
Select GPS in the Settings screen. The GPS  
screen provides tools for setting up and  
viewing your Smartphone’s GPS functionality.  
Select Options >Turn On Bluetooth to  
turn your phone’s Bluetooth connection on  
from within CoPilot.  
AvoidTolls — Press to select Always Avoid  
to always avoid toll roads even when the  
resulting route is impractical or out-of-the-  
way, Use if Necessary to avoid tolls where  
practical, or No Restriction to ignore toll  
status of roads.  
Select Options > Search for GPS to have  
CoPilot search for your Smartphone’s GPS  
receiver. When your receiver is detected, you’ll  
see the name of the receiver along with any  
other Bluetooth devices. Highlight the receiver  
and press Select.  
(Scroll down to see more options.)  
Borders Open — (U.S. only)Turn this option  
on to have CoPilot route across international  
borders. When this option is turned off, your  
route won’t cross borders even when it would  
be more practical.  
Once the receiver is detected, you can scroll  
right to the Details tab to see your current  
lat/long position and GPS status.  
Congestion ZoneWarning — (U.K. only)  
Turn on to have CoPilot display a warning  
when your route will take you into the  
London Congestion Zone.  
- 25 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guidance  
POI Alerts  
Select Options > Settings > Guidance.  
Select Options > Settings > POI Alerts.  
The Guidance screen lets you indicate how far  
ahead of your next turn you want to be when  
you get a “Next turn” alert. Four different  
settings can be toggled on or off (scroll down  
to see the Just Ahead option).  
Turn this option on if you want to be alerted  
as you approach points of interest.  
When POI Alerts is enabled, CoPilot will  
alert you with a verbal prompt each time you  
approach a Point of Interest on or near your  
route. A screen alert will also appear.  
Toggling POI Alerts on takes you to a screen  
where you can set preferences:  
Map  
Category — Press to choose one category  
of POI you want to receive alerts for.  
Select Options > Settings > Map.  
Settings in the Map options screen are:  
Type — Press to choose one type of POI you  
want to receive alerts for.  
Units — Press to choose Miles or  
Kilometers as the unit of distance.  
Map Rotation — Press to choose Heading  
Up to have the map display always track your  
position moving upward, or North Up to  
always maintain north at the top of the map as  
you drive.  
(Scroll down to see more options.)  
Distance Ahead — Press to set the distance  
at which you would like to receive an alert as  
you approach each POI.  
Map Colors — CoPilot offers Day and Night  
display modes. Colors are darker and glare is  
reduced in Night mode. Choose Automatic  
to have the mode switch automatically  
according to time of day.  
(Scroll down to see more options.)  
Press Report POIs which to indicate  
whether you want to be alerted only to POI  
directly on your route (On Route) or also  
those that are nearby (Near Route).  
Show POIs — Press to choose when CoPilot  
will display points of interest (POI) on the map.  
Select Always to always have POI displayed.  
If your map is too cluttered, you may want to  
select Never or When Stopped.  
(By default, CoPilot detects only POI that are  
directly on your route. Choosing Near Route  
will increase the number of POI that are  
detected.)  
Turn Restrictions —Turn this option  
on to have one-way streets and other turn  
restrictions noted on the map.  
- 26 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License  
Backlight  
Select Options > Settings > License.  
Select Options > Settings > Backlight.  
This option displays your CoPilot licence  
information. Press Options > Activate/  
Upgrade in this screen to activate a new  
licence, or Options > Deactivate to  
deactivate CoPilot if you need to install the  
application on another phone.  
To keep your phone’s backlight on in order to  
see CoPilot’s on-screen maps and directions,  
you can choose from these options:  
With GPS — Backlight is on whenever  
CoPilot is receiving GPS signals.  
NearTurn — Backlight comes on when you  
approach your next turn.  
Always — Backlight always on when CoPilot  
is running.  
Favourites  
Select Options > Settings > Favourites.  
Never — Backlight is never on when CoPilot  
is running.  
CoPilot automatically places every stop you  
enter on a list of favourite places for future  
quick trip entry. Press Options at the  
bottom of the screen to access these options:  
Map — Zoom to the highlighted favourite.  
Details —View or edit address data for the  
highlighted favourite.  
Live  
Delete — Delete the highlighted favourite.  
Select Options > Settings > Live.  
Delete All — Delete all favourites from your  
favourites list.  
CoPilot Live allows you to maintain two-way  
communication with drivers who are using  
CoPilot and to actually see where they are  
currently located. You can do this from our  
CoPilot Live web page.  
Set as Home — Set the highlighted  
favourite as your Home address for quick trip  
entry.  
Set asWork — Set the highlighted favourite  
as yourWork address for quick trip entry.  
See CoPilot Live Communications, p. 38-39, for a  
description of these features.  
NOTE: When the number of Favourites  
on your list reaches 50, each new  
address will replace the address that has  
been inactive for the longest period of  
time.  
- 27 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CoPilot Modes  
CoPilot has three modes of operation on your Smartphone. To switch  
modes, press Options > Mode in the GoingTo screen or any guidance  
screen.  
Walking Mode  
Take CoPilot with you wherever you go! Walking Mode provides an as-  
the-crow-flies distance and direction line to your destination, directions  
that are perfect for walking. A GPS receiver must be attached and  
receiving signals.  
Guidance Mode  
In Guidance Mode, you enter one or more destinations, then press  
Drive to start driving and receive guidance. This mode provides you  
with on-screen and spoken driving directions and other information  
relevant to your trip, such as estimated time of arrival (ETA) and  
distance to the next stop.  
To receive driving directions and other data, you must have a GPS  
receiver that CoPilot recognizes and the receiver must be in a good  
position to receive signals.  
Planning Mode  
Planning Mode lets you use your Smartphone as a pre-trip planning tool  
or easy-to-use reference guide. Planning Mode lets you view static maps  
and directions without the need for a GPS receiver.  
- 28 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trip Planning On Your Smartphone  
You can use CoPilot on your Smartphone for trip planning whether or  
not the GPS receiver is connected and receiving data. In Planning Mode  
you can run a trip even when you’re not in your car. You’ll get driving  
directions and maps to use as a reference before your trip begins.  
4. Press Options > Actions > Map to see the highlighted stop on the  
map. In the Map screen, you can use the Options menu to zoom  
your view in and out or pick a stop off the map to add to the list in  
the My Start & Stops screen (see p. 20). If the map is too cluttered,  
you can turn off the display of POI — select Show POI to toggle it  
off or on.  
1. First turn on your Smartphone  
and launch CoPilot. Select  
Plan Route, or in the GoingTo  
screen or any guidance screen  
press Options > Mode > and  
select Planning.  
2. The My Start & Stops screen will  
open. Select <Add a Stop>,  
then add stops to your trip as  
you would in Guidance mode.  
5. If you decide you want to begin driving and receive guidance on this  
planned route, simply select Options > Mode > Guidance. The My  
Start & Stops screen becomes the GoingTo screen. Just press Drive  
to start your trip.  
3. The first stop in the My Start & Stops list is the starting point of your  
trip. Use the Options menu in this screen to change the position  
of the highlighted stop on the list, to optimise the stop order (there  
must be at least three stops to do this), or to see the highlighted stop  
on the map. Press Directions when all stops have been entered to  
generate an Itinerary.  
- 29 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trip Planning On Your Desktop  
You can use CoPilot’s desktop functions to map out routes and print  
maps and driving directions before getting on the road. Desktop trip  
planning is an additional feature of CoPilot that is in no way connected  
to using your Smartphone for route guidance.  
RunTrip  
On the following pages you will find brief descriptions of CoPilot’s  
desktop trip planning capabilities. For more detailed descriptions,  
open CoPilot Help from the desktop application (Help menu > Help  
Contents and Search, or click the Help button on the toolbar). Go  
to DesktopTrip Planning in the Contents tab.  
RunTrip button or RunTrip  
in theTrip menu.  
To begin planning a trip on your desktop, click the Planning icon in the  
sidebar to the left of the map. Using the drop-down menus you can  
select from a number of planning features. Many of these features can  
also be accessed from the toolbar. Place your cursor on any toolbar  
button without clicking to see what it does.  
EditTrip  
NewTrip  
EditTrip button or EditTrip  
in theTrip menu.  
NewTrip button or NewTrip  
in the File menu.  
- 30 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SaveTrip  
Print  
SaveTrip button or Save  
Trip / SaveTrip As... in the File  
menu.  
Print button or Print... in  
the File menu.  
OpenTrip  
Help  
OpenTrip button or Open  
Trip in the File menu.  
Help button or Help  
Contents and Search in the  
Help menu.  
- 31 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom In  
More Detail  
Zoom In button or Zoom  
In in the Map menu.  
More Detail button or  
Detail > Show More in the  
Map menu.  
Each time you click this  
button, your view will  
be zoomed in by one  
increment. The zoom level  
is shown in the title bar of  
the map window.  
Click to increase the level  
of detail you see on the map  
by one increment without  
changing the zoom level.  
Zoom Out  
Less Detail  
Less Detail button or  
Detail > Show Less in the  
Map menu.  
Zoom Out button or Zoom  
Out in the Map menu.  
Each time you click this  
button, your view will  
be zoomed out by one  
increment. The zoom level  
is shown in the title bar of  
the map window.  
Click to decrease the level  
of detail you see on the map  
by one increment without  
changing the zoom level.  
- 32 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZoomTo Region  
Pick Stops  
Zoom to Region button  
or Zoom Region in the Map  
menu. This function allows  
you to zoom your map view  
to a specific area. Choices  
in the sub-menu will depend  
on which CoPilot data  
To turn on Pick Stop mode,  
click the Pick Stops button  
or right-click on the map  
and select Pick Stops. Then  
click on any point to enter  
it as a stop. Your map view  
must be zoomed in to level  
11 or 12 (level is displayed  
in the CoPilot window title  
bar).  
region(s) were purchased.  
In the dialog that opens, you can choose to enter the point as a start  
place, a waypoint, or a destination.  
Refresh Map  
Options (Tools Menu)  
Refresh Map button or  
Refresh Map in the Map  
menu. When scrolling  
through a map you may  
notice it takes a few seconds  
for all the data to catch up.  
This function will snap the  
entire screen to a new map.  
Select Options from the  
drop-downTools menu.  
In this window you can change the way you view your desktop maps and  
various application settings. For example, in the General tab you can  
choose the measure of distance (miles vs. kilometers), and the Map tab  
lets you adjust the appearance of features on the map such as roads and  
points of interest.  
- 33 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference: CoPilot On Your Desktop  
Landmark Reporting  
The following is a guide to the main screens you will see as you use  
CoPilot on your desktop/laptop computer for trip planning.  
MapWindow  
Menus and toolbar buttons  
to access all of CoPilot’s  
desktop features.  
Click on a tab to frame any  
stop on your route.  
Your planned route with  
stops. Zoom to a stop  
and move your cursor  
over any street to see  
its name.  
Select Landmark Reporting  
from the drop-downTrip  
menu.  
In this window you can control how  
many landmarks CoPilot points out  
when generating driving directions.  
Distance Scale.  
Latitude/longitude position  
of your cursor on the map.  
Help Menu  
Use the drop-down Help menu to  
access CoPilot Help for assistance  
with all aspects of the software and  
to quickly access ALK’s web site.  
Trip PlannerWindow (Cities & Addresses)  
Click Cities and Addresses.  
Enter City-Country or  
Postal Code. Enter an  
address (optional), with the  
option to add a Name to  
it. Click the Add Stop  
button to add the stop to the  
Itinerary.  
Move stops up or down on  
your Itinerary, zoom to stop  
location on the map, delete a  
stop, or add a favourite.  
See p. 36 for routing options.  
- 34 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trip PlannerWindow (Points of Interest)  
Trip PlannerWindow (Contacts)  
Click the Points of Interest tab.  
Enter a contact’s first or last  
name and press <Enter>.  
CoPilot will search your  
Enter a City-Country or  
Postal Code in which you  
would like to search, a radius  
within which to search, and  
(optionally) choose a category  
and type from the drop-down  
menu.  
Contacts database for matches.  
Select the Contacts address type  
(as defined in Outlook) to get  
the appropriate address, then  
click the Add Stop button to  
add it to your Itinerary.  
Click the binoculars to start  
the search.  
You can also enter a name to  
narrow down the search in the  
POIs that start with box.  
Driving Directions and Map (Split Screen)  
When you click Run in theTrip Planner window, your route will  
be calculated and driving directions and a map will display. To print  
either one, click on it and choose Print from the File menu. To print  
directions plus all map views, choose TravPak Printing.  
You will be given a list of matches  
to your search criteria. Highlight  
your selection and click Select.  
Click the Add Stop button to  
add it to your Itinerary.  
Atlas, Start, and End  
tabs will zoom to the  
map view of those  
Driving directions give you turn-  
by-turn instructions including  
ramps and exits, and distance and  
time between turns.  
Trip PlannerWindow (Favourites)  
places respectively.  
Select the Favourites tab.  
Highlight a selection from  
your list of places by clicking on  
it. You can zoom to it on the  
map, or delete it from the list  
using the buttons to the right.  
Click the Add Stop button to  
add a favourite to your Itinerary.  
See p. 36 for routing options.  
- 35 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Routing Options  
Trip Summary  
Select Run in theTrip Planner  
window to run the trip.  
Click the Options button in the  
Trip Planner window to access  
CoPilot routing options.  
TheTrip Summary will show start  
and end places, and the number  
of stops in between them.  
Auto and Quickest are the  
default settings, providing the  
quickest routing for automobiles  
based on practical considerations  
such as road quality, terrain, and  
urban/rural classifications. RV  
routing favors major roads and  
avoids sharp turns, U-turns, and  
urbanized areas where possible.  
In the U.S. only, RV routing avoids  
12' 6" height restrictions on  
highways. Scenic routing avoids  
major roads and favors more  
rural and scenic roads wherever  
possible and practical.  
Total distance and time for trip.  
Estimated fuel cost for your trip  
based on entries in the Fuel Cost  
Calculator (Trip menu).  
Click OK to view map and  
driving directions.  
Fuel Cost Calculator  
To calculate an estimate of your  
fuel costs for a trip, select Fuel  
Cost Calculator from theTrip  
menu before you run your route.  
Check Avoid Propane  
RestrictedTunnels if desired.  
Fill in the average cost you expect  
to pay per gallon or liter of fuel,  
and the distance per gallon/liter  
you can expect to get in your  
vehicle. Click OK, then run your  
trip. A fuel cost estimate based  
on what you entered will be  
calculated and shown in theTrip  
Summary that CoPilot creates for  
every trip you run.  
Click Advanced to set general  
road preferences.  
Drag the sliding bars to the left  
or right to avoid or favor each  
road type.  
Set the road speeds CoPilot uses  
in its route calculations for each  
type of road by either typing or  
clicking the up and down arrows  
under Rural and Urban for  
each road type.  
- 36 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up a CoPilot LiveWeb Account  
To use Live capabilities, your Smartphone must have a wireless Internet  
connection. To create your account on the CoPilot Live website:  
CoPilot Live Communications  
CoPilot Live allows you to maintain two-way communication with drivers  
who are using CoPilot and to actually see where they are currently located.  
You can do this from the CoPilot Live web page.  
1. Go to the web site for your region:  
• North America: http://live.alk.com  
• Europe: http://live.alk.eu.com  
Using this CoPilot Live functionality requires the following:  
1) If you want to track and message other drivers from a  
desktop or laptop computer: Your PC must be connected to the  
internet so that you can access our CoPilot Live web page through a  
normal web browser.  
2. Choose a Username and Password that you will use to login to  
the CoPilot Live network.  
3. Fill in the rest of the required information.  
2) If you want others to track and send messages to you:  
CoPilot Live must be running on your Smartphone in your vehicle.  
You must have a wireless Internet connection.  
4. Click “Submit” to create your account.  
Set UpYour Smartphone  
Take advantage of your Smartphone’s wireless Internet (GPRS) connection  
for real-time traffic alerts, tracking, messaging, and itinerary updates.  
About the CoPilot LiveWeb Page  
As a CoPilot user, you can create an account on our website that allows  
your family, friends, and coworkers to “see” you and communicate with you  
anywhere in the world!  
First, create your Username and Password on the CoPilot Live website  
as described above. Then, on your Smartphone, open CoPilot and select  
Options > Settings > Live Setup. Live Setup options are:  
Through the website you can do all of the following:  
• Login: Check Enable Live Communications and enter the  
Username and Password you created on the CoPilot Live  
website. The Screen Name is how others will identify you.  
•
•
•
Send text messages to CoPilot users on the road, using large,  
customisable, one-touch response buttons to ensure driver safety.  
Real-time tracking of other people who are on the road. See their  
current location, destination, ETA and much more on a map.  
NOTE: Your screen name, user name, and/or password can  
be changed as many times as you like. But you’ll need to change  
your user name or password on the LiveWeb page before changing  
them on your Smartphone. This is not required for your screen name.  
Send trip itinerary updates including new stops and revised  
destinations — you can coordinate a change in plans with someone  
who’s on the road right now.  
• Settings: Choose the message timeout and how frequently you want  
to broadcast your position. Less frequent broadcasts will reduce the  
data traffic on your Internet plan.  
•
Create an online account from where you can send temporary or  
permanent tracking numbers to friends and family, giving you tighter  
control of the security so you know who has access to you while  
you’re on the road. You can also create and join groups with other  
CoPilot users, and manage all your account preferences.  
• Invites: Invitations can be sent to e-mail recipients for real-time  
location tracking.  
To more about CoPilot’s Live capabilities, visit ALK’s CoPilot Live web  
page at htttp:///llive.aalk.coom (North America) or http://live.alk.eu.com  
(Europe). Click the Help button at the top of the home page.  
• Inbox: View or Delete messages received.  
•Traffic: Where available. Select your traffic data source. If using a  
TMC traffic receiver, set tuner and frequency options. See Real-Time  
Traffic Information, p. 38-39.  
- 37 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Real-Time Traffic Information  
Your Live connection status is shown by the round icon at the bottom  
right of the black information bar:  
In addition to providing users with pre-trip planning and GPS route  
guidance capabilities, CoPilot uses wireless communications to  
automatically send real-time information to drivers, notifying them of  
traffic incidents along the route ahead and potential alternate routes.  
As soon as the user selects a destination, CoPilot will provide dynamic  
driving directions and regularly updated traffic incident reports.  
• Green — Good.  
• Yellow — OK. Usually seen when first connecting or in poor  
GPRS coverage.  
• Red — No connection. Check your GPRS network coverage  
and Live settings.  
There are two ways to receive real-time traffic feeds with CoPilot Live:  
1. Use a wireless Internet (GPRS) connection to receive traffic  
incidents through a traffic service provider.  
2. Use aTMC-enabled traffic receiver to obtain traffic incidents  
through a dedicated FM band.  
Traffic is an optional additional-cost service and is not available in all areas.  
Real-TimeTraffic in Guidance Mode  
Provided that CoPilot has GPS acquisition, a user-inputted destination,  
and a traffic feed (GPRS orTMC), it will provide regularly updated traffic  
incident reports in Guidance Mode. As soon as the user selects a  
destination, CoPilot begins providing dynamic driving directions as well as  
regularly updated traffic incident reports and alternate routes based on  
the user’s destination and route ahead.  
Traffic Options  
To configure traffic options, on your Smartphone select Options >  
Settings > Live Setup > Traffic.  
• EnableTraffic: Switch on theTraffic service.  
• Automatically CheckTraffic: Select to have CoPilot automatically  
check for traffic incidents when you first run a route and periodically  
after that as you drive into new areas.  
• Default Action: Choose either Ignore or Avoid. If a new traffic  
alert times out before you look at it, that incident will take the default  
action. The Avoid setting will generate an alternate route.  
- 38 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Traffic Report Content  
UsingTraffic  
In Guidance Mode, press Options >Traffic. Options in this menu are:  
CoPilot Live alerts you when a traffic  
incident is detected on your route ahead.  
Press 9 to see a list of all current incidents.  
• Check Route: Select Check Route to manually check for traffic  
incidents along your current route.  
• FindTraffic: Select FindTraffic to search for traffic incidents  
around any location.  
• ReviewTraffic: To view or change your traffic routing, press  
Options >Traffic > ReviewTraffic.  
• ClearTraffic: To set all incidents to Ignore, press Options >  
Traffic > ClearTraffic.  
In theTraffic screen, highlight an incident  
and press Options for response options.  
Avoiding aTraffic Incident: When CoPilot sends a traffic incident  
alert, pressing 9 will open a list of current traffic incidents. You can  
choose to Avoid or Ignore each incident — highlight it and press  
Options > Avoid or Options > Ignore. CoPilot will automatically  
route around any incident you choose to avoid.  
If you choose to Avoid the incident, a  
new route will be calculated to avoid  
congestion. If you Ignore the incident,  
your route will continue unchanged. If  
an alert times out before you respond to  
it, CoPilot will use your default incident  
action for any unviewed incidents (see  
Traffic Options p. 38).  
Traffic Icon Display  
CoPilot obtains traffic content from a traffic server orTMC station and  
displays the information in its maps and itinerary. Incidents are displayed  
on the map using the following indicators:  
Select Map to see the location of the  
congestion on the map, and Details to see  
more information about the incident.  
General Incident  
Accident  
Road Construction  
Weather  
Traffic Jam  
- 39 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating/Using Your Own Voice  
You can create your own voice or load voices that other CoPilot  
users have created and posted online. To do this, create a folder with  
any name you want and copy sound files with the exact names of the  
CoPilot sound files.  
NextStop  
Continuing to Next Stop  
Point of Interest Ahead  
You Have ReachedYour Destination  
Turn Right  
PoiAhead  
Rdestination.wav  
RightTurn  
The CoPilot sound file names and their associate dialogues are:  
Roundabout1  
Roundabout10  
Roundabout2  
Roundabout3  
Roundabout4  
Roundabout5  
Roundabout5  
Roundabout7  
Roundabout8  
Roundabout9  
SafetyCam  
Take 1st Exit at Roundabout  
Take 10th Exit at Roundabout  
Take 2nd Exit at Roundabout  
Take 3rd Exit at Roundabout  
Take 4th Exit at Roundabout  
Take 5th Exit at Roundabout  
Take 6th Exit at Roundabout  
Take 7th Exit at Roundabout  
Take 8th Exit at Roundabout  
Take 9th Exit at Roundabout  
Safety Camera Ahead  
Make a Sharp Left  
File Name  
Dialogue  
100y.wav  
One HundredYards Ahead  
One Hundred FiftyYards Ahead  
1 Kilometer Ahead  
150y.wav  
1kmWarning  
1miWarning  
200mWarning  
200y.wav  
1 Mile Ahead  
200 Meters Ahead  
Two HundredYards Ahead  
Two Hundred FiftyYards Ahead  
2 Kilometers Ahead  
250y.wav  
2kmWarning  
2miWarning  
300y.wav  
SharpLeft  
2 Miles Ahead  
SharpRight  
Make a Sharp Right  
Three HundredYards Ahead  
Three Hundred FiftyYards Ahead  
Spcam.wav  
Speed Camera Ahead  
Take Exit  
350y.wav  
TakeExit  
3tenthmiWarning 3/10ths of a Mile Ahead  
Then  
Then  
400y.wav  
Four HundredYards Ahead  
Four Hundred FiftyYards Ahead  
500 Meters Ahead  
Five HundredYards Ahead  
FiftyYards Ahead  
TrafficWarning  
TurnAround  
Waypoint  
Traffic Incident Reported  
Turn Around  
450y.wav  
500mWarning  
500y.wav  
Approaching Stop  
50y.wav  
NOTE: The sound files must be saved in OGG orWAV format.  
Arrived  
Approaching Stop  
Bear Left  
BearLeft  
BearRight  
CancelDetour  
CPWelcome  
Detour  
Bear Right  
EXAMPLE:  
Cancelling Detour  
Welcome to CoPilot  
Finding Detour  
- Create a folder—the name of the folder can be anything you want  
(for this example we’ll use ‘FunVoice’ as the folder name).  
- Record sound files to replace some or all of the CoPilot sound files  
(CoPilot will use the default voice for sound files it does not find).  
Fspcam.wav  
Junction.wav  
JustAhead  
Keepleft.wav  
Keepright.wav  
Keeps.wav  
LeftTurn  
Attention Fixed Automatic Safety Camera  
Take Motorway Junction  
Just Ahead  
- Copy the folder with the new sound files to Storage Card\CoPilot\  
Save\[Choose a language folder].  
Keep Left  
Keep Right  
- Now when you select that language, you’ll see ‘FunVoice’ as one of  
Keep Straight Ahead  
Turn Left  
the voice options (see page 5 for details on changing your voice).  
- 40 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CoPilot Technical Support  
Licence Upgrade  
After registering your software (see p.42), you’re entitled to technical  
support and discounts on new versions of CoPilot. Check out ALK’s  
web site for technical support documentation and posted answers to  
common questions. If the web site does not provide an answer to  
your question, technical support for registered users is available during  
standard business hours (9:00 am - 5:00 pm Monday-Friday). You should  
be at your computer and have your Installation Product Key available  
when you contact us (this Product Key can be found on the front or  
back cover of the printed Quick Start Guide that came with the product  
or on the supplied Product Key card).  
The CoPilot desktop software you purchased contains street-level maps  
for Europe or the United States. Licences are available for the following  
European and North American regions:  
(1) Major region - Detailed street-level maps for any of the following  
regions: Alps Ski Region, Benelux (Belgium, Canada, the Netherlands,  
and Luxembourg), Canada, France, Germany, Italy, Pyrenees,  
Scandinavia, and the United Kingdom.  
(2) Pan-Europe - Complete street-level maps for all of Europe  
(3) United States - Complete street-level maps for the entire U.S.  
Please be sure to reach us using the contact information for your region  
shown below. We are sorry, but our support staff in ALK’s regional  
offices cannot respond to requests for assistance outside the areas they  
serve.  
If you purchased CoPilot with a single region licence and later want to  
use street maps from other regions, you will need to purchase an upgrade  
licence from your dealer. After purchasing a CoPilot region, you will need  
to go through the activation process.  
North America -Web: www.alk.com, E-mail: [email protected],  
Fax: 609-252-8166, Phone: 888-872-8768  
Europe -Web: www.alk.eu.com, E-mail: [email protected],  
Postal: Suite 8, 4 Bloomsbury Square, LondonWC1A 2RP, UK  
Phone: +44 (0)207 404 4222  
Adding a Data Region  
If you have purchased an additional data region after your initial  
purchase of CoPilot, you will need to modify the original (“Base”)  
installation and activate the new region.  
Australia -Web: www.travroute.com.au/support.html,  
E-mail: [email protected], Phone: 03-9855-1498  
IMPORTANT: You can only use your Expansion Product Key AFTER  
you have installed and activated CoPilot with a Product Key for the Base  
product. If you have not yet installed CoPilot, please do so first and then  
follow the instructions below.  
ONYOUR DESKTOP/LAPTOP:  
1. Insert your CoPilot Install Disc into your CD-ROM drive.  
2. Select Modify and click Next when the InstallShieldWizard appears.  
3. Enter your Expansion Product Key when prompted to enter a  
Product Key.  
4. Follow the on-screen instructions for installing to your desktop and  
Smartphone.  
- 41 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. The ActivationWizard will appear at the end of installation.  
Activation occurs just as it did when you originally installed CoPilot  
(see p. 4-5).  
Using Help Files  
CoPilot provides extensive Help Files, available on your desktop/laptop  
and your Smartphone, to guide you through the program as you use it.  
ONYOUR SMARTPHONE:  
To access Help on your Smartphone, once the CoPilot application is  
launched, press Options > Help.  
IMPORTANT: You must install and activate CoPilot to your  
Smartphone using your Base Product Key AND you must have data  
downloaded to your Smartphone before using your Expansion Product  
Key.  
In the desktop application, click on the Help button in any window to  
open a Help topic that describes how to use that window, or use the  
Help menu and select Help Contents and Search.  
1. Open CoPilot on your Smartphone.  
2. From the bottom of the screen, select Options > Settings >  
Licence.  
Software Registration  
3. Enter your Expansion Product Key (found in your order confirmation  
Registered users are entitled to technical support, discounts on  
new versions of CoPilot, new product information, and software  
enhancements.  
e-mail) when prompted to enter a Product Key.  
4. Follow the on-screen instructions.  
5. Activation occurs just as it did when you originally installed CoPilot  
(see p. 4-5).  
NOTE: Software activation does NOT register your software, they are  
two separate processes.  
If you have any questions about this process, please visit our Support  
Center at www.alk.com (North America) or www.alk.eu.com  
(Europe) or send an e-mail to [email protected].  
In North America: Go to www.alk.com and click “Support Center”  
In Europe: Go to www.alk.eu.com and click “Support Center”.  
Region Selection  
If you purchased an additional data region, when downloading map data  
to your Smartphone from your desktop PC or laptop, you will need to  
make sure the proper region is active. To do this, on your desktop in  
Planning mode click the Map menu > Region > and check the desired  
region. Then restart CoPilot.  
- 42 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CoPilot® Live End-User License Agreement  
NOTE: On the following pages there are three separate license agreements for users of  
ꢀ Electronic reproduction and transmission of output to remote locations is not  
permitted.  
ALK retains all rights not expressly granted. Nothing in this License Agreement  
constitutes a waiver of ALK's rights under the U.S. copyright laws or other applicable  
copyright laws or any other federal or state law.  
North American, European, and Australian Data.  
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or  
an entity), AND ALKTECHNOLOGIES, INC. ("ALK"). IFYOU DO NOT AGREETO  
THETERMS OFTHIS LICENSE, DO NOT OPENTHE PACKAGE. Promptly return the  
unopened CD-ROM package and accompanying materials (including written materials  
and containers) to the dealer from which you  
2.Term:  
This License is effective upon receipt by you of the Software and upon opening the  
package. The License is effective until terminated. You may terminate this License at  
any time by returning all copies of the Software, and any portions thereof, to ALK. The  
License terminates automatically if you fail to comply with any of the terms of this  
License Agreement. You agree upon such termination to return or destroy this CD-  
ROM and all other copies of the Software and certify in writing to ALK that you have  
done so..  
obtained them for a full refund.  
OPENINGTHE PACKAGE OR USINGTHE ENCLOSED SOFTWARE  
INDICATESYOUR ACCEPTANCE OFTHETERMS OFTHIS LICENSE.  
ALK®Technologies, Inc. LICENSE AGREEMENT  
CoPilot Live with NORTH AMERICAN DATA  
LICENSES: 1 User  
3. LimitedWarranty:  
ALK warrants that all disc(s) on which the Software is furnished shall, for a period of  
90 days from delivery (the "Warranty Period") be free, in normal use, from defects in  
material and workmanship. ALK will have no responsibility to replace any disc(s) that  
have been damaged by accident, abuse, or misapplication.  
1. Grant of License:  
This ALK License Agreement ("License") is a single-user, non-exclusive, non-  
transferable license agreement and not an agreement for sale.ALK hereby  
licenses the Help Files and CD-ROM software identified above (collectively,  
"the Software") to you under the following terms and conditions.  
Customer Remedies:ALK's entire liability and your exclusive remedy shall be, at ALK's  
option, either (a) return of the price paid or (b) replacement of the disc(s) that does  
not meet ALK's LimitedWarranty, and that is returned to ALK with a copy of your  
receipt.  
The Software may not be loaded onto a network of any type. You may use the  
Software on any compatible personal computer, provided you use it on only one  
computer at a time. The Software is "in use" on a computer when it is loaded into the  
temporary memory (i.e., RAM) or installed into the permanent memory (e.g., hard disk,  
CD-ROM, or other storage device) of that computer. You may make a single back-up  
or archival copy of the Software for back-up purposes only. You may not transfer this  
Software or assign this License Agreement to another party.  
Except as specifically provided above, ALK MAKES NO OTHERWARRANTY OR  
REPRESENTATION, EITHER EXPRESS OR IMPLIED,WITH RESPECTTOTHE  
SOFTWARE OR DOCUMENTATION, INCLUDING ANYWARRANTY ASTOTHE  
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENTWILL ALKTECHNOLOGIES, INC. BE LIABLE FOR  
DIRECT DAMAGES IN EXCESS OFTHE LICENSE FEE OR ANY INDIRECT, SPECIAL,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OFTHE USE OR  
INABILITYTO USETHE SOFTWARE OR DOCUMENTATION, EVEN IF ADVISED  
OFTHE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL ALK'S LIABILITY  
EXCEEDTHE AMOUNT OFTHE LICENSE FEE.  
You are not permitted to, during the term of this License Agreement and thereafter:  
ꢀ Use the Software on a network or file server.  
ꢀ Use or copy the Software or the accompanying documentation except as  
While the information contained in the Software was believed to have been correct at  
the time of publication,ALK cannot guarantee its accuracy and shall not be subject to  
liability for any errors or omissions. Information in the Software and its accompanying  
preprinted materials is subject to change without notice and does not represent a  
commitment or endorsement on the part of ALK. Routes and miles generated by the  
Software are not suitable for commercial truck use.  
provided in this License Agreement.  
ꢀ Alter, merge, modify, or adapt the Software or the accompanying documentation in  
any way including disassembling or decompiling this Software.  
ꢀ Loan, lease, sell, transfer, or sublicense the Software or the accompanying  
documentation.  
ꢀ Copy, loan, lease, sell, transfer, or sublicense any output of this Software (including  
but not limited to printed maps and driving itineraries); However, you may provide  
a limited number of printed copies of a single trip to family members or traveling  
companions.  
THEWARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN  
LIEU OF ALL OTHERS, ORAL ORWRITTEN, EXPRESS OR IMPLIED. No ALK dealer,  
distributor, agent, or employee is authorized to make any modification or addition  
to this warranty. Some states do not allow the exclusion or limitation of implied  
warranties or limitation of liability for incidental or consequential damages, so the  
above limitation or exclusion may not apply to you.  
ꢀ You are not permitted to use the Software for motor-carrier tariff or routing  
purposes.  
- 43 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Licensee's Responsibility:  
physical media. Fonix reserves all rights not specifically granted in this Agreement.  
You assume all responsibility for, and ALK shall not be liable for, all action taken,  
decisions made, and advice given as a result of your use of the Software.  
USE AND RESTRICTIONS:You may operate the Software on only one computer.  
However, if you have purchased a network or multiple-user license, you may load  
and use as many single-use copies and/or support as many concurrent users, in the  
aggregate, as are authorized by such license. You may make only one copy of the  
Software, retaining the Fonix CD or other media for storage and back-up purposes. The  
Software does not include updates, maintenance, or support, which may be separately  
available. This Software and its voice output are for your personal, individual use only.  
You are not permitted to broadcast or distribute the voice output of the Software (i.e.,  
synthesized speech) to more than one person or to use the Software's voice output  
for any commercial purposes. You may not modify, adapt, translate, rent, lease, loan,  
resell for profit, distribute, network, or create derivative works based on any part of the  
Software. You may not reverse engineer, decompile, or disassemble the Software.  
5. US Government Restricted Rights:  
The Software and documentation are provided with restricted and limited rights. Use,  
duplication, or disclosure by the Government is subject to restrictions set forth in  
subparagraphs (c) (1) and (2) of the Commercial Computer Software-Restricted Rights  
clause at 48 CFR 52.227-19, as applicable. Manufacturer is ALKTechnologies, Inc., 1000  
Herrontown Road, Princeton, NJ 08540.  
6. General:  
The export or re-export of the Software may be restricted by the laws of the United  
States and other countries, and you shall not export this Software in violation of any  
such applicable laws. This License Agreement is governed by the laws of the State of  
New Jersey.  
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under  
normal use, free from defects in material and workmanship for one year from the date  
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,  
will be replacement of the defective media without charge. EXCEPT FORTHIS  
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,  
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely  
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING  
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED  
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE LICENSE FEEYOU  
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,  
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,  
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR SUCH  
LOSS OR DAMAGE.  
© Copyright 1990-2006 ALKTechnologies, Inc.  
--------------------------------------------------------------------------  
Exit Authority (c) 1999-2006 Zenrin USA, Inc. All rights reserved.  
--------------------------------------------------------------------------  
Disclosure for products containing Canadian Postal Code and/or Canadian  
Street-Level Data:  
Based on Computer File(s) licensed from Statistics Canada. © Copyright, HER MAJESTY  
THE QUEEN IN RIGHT OF CANADA, as represented by the Minister of Industry,  
Statistics Canada 2006. ALKTechnologies, Inc. is an Authorized User of selected  
Statistics Canada Computer File(s) and Distributor of derived Information Products  
under Licensing Agreement 6147. No confidential information about an individual,  
family, household, organisation or business has been obtained from Statistics Canada.  
The above limitations may be superseded by law in some jurisdictions.  
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying  
materials are provided with Restricted Rights. Use, duplications, or disclosure by the  
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe  
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or  
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights  
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at  
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.  
--------------------------------------------------------------------------  
Software License Agreement for FONIXTEXTTO SPEECH ENGINE  
IMPORTANT! READTHIS LICENSE AGREEMENT BEFORE OPENINGTHIS  
SOFTWARE PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE  
SOFTWARE,YOU INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.  
SOFTWARE LICENSE AGREEMENT  
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"), but  
may be superseded by a separate license agreement that you and Fonix have signed.  
The software in this packet ("Software") and its media and documentation (collectively,  
the "Product") are protected by copyright and other intellectual property laws and  
international treaties. You have no title to, or ownership of, the Product, other than its  
- 44 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
of the Software has resulted from your fault, abuse, or misapplication. If we correct  
an error in the Software for you, then the unexpired portion of the LimitedWarranty  
period as at the date you informed us of the error will apply to the corrected software  
once you have received the corrected version.  
ALK® Technologies, Inc. LICENSE AGREEMENT  
CoPilot Live with EUROPEAN DATA  
LicensES: 1 User  
NO OTHERWARRANTIES: EXCEPT AS SET OUT INTHE LIMITED  
WARRANTY,ALK DOES NOTWARRANTTHATTHE SOFTWARE IS ERROR FREE.  
ALK DISCLAIMS ALL OTHERWARRANTIESWITH RESPECTTOTHE SOFTWARE,  
WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITEDTO IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE  
AND NON-INFRINGEMENT OFTHIRD PARTY RIGHTS. Some jurisdictions do not  
allow the exclusion of implied warranties or limits on how long an implied warranty  
may last, or an exclusion of incidental damages. This means the above limitations or  
exclusions may not apply to you. This warranty gives you specific legal rights and you  
may also have other rights depending on your country.  
IMPORTANT: Please read the following agreement ("License") carefully.  
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or an  
entity),AND ALKTechnologies, Inc. ("ALK"). IFYOU DO NOT AGREETOTHETERMS  
OFTHIS LICENSE, DO NOT INSTALLTHE SOFTWARE. Promptly return the package  
and accompanying materials (including written materials and containers) to the dealer  
from which you obtained them for a full refund.  
Acceptance: Installation or use of the enclosed ALKTechnologies, Inc. ("ALK")  
software (the "Software") on your computer constitutes your acceptance of these  
terms. If you do not agree to the terms of this License, you must immediately delete  
the Software from your computer and destroy any copies you made of the Software  
and of any written materials relating to the software, and promptly return the Software  
and, if bought as part of a package, any associated devices to your retailer for a refund.  
No Liability for indirect loss: In no event will ALK be liable to you for any loss  
of profit, wasted time, lost business or for any incidental, or indirect loss of any kind  
arising out of the performance or use of the Software, even if ALK has been advised of  
the possibility of such damages.  
License: ALK grants you, as an individual, a License to install and use one copy of the  
Software on a single personal computer at a time.Your License to use the Software  
is subject to you complying with the terms of this License. A License is required for  
each installation of the Software, unless the Software is (i) installed temporarily on a  
computer during the repair or maintenance of the computer on which the Software is  
normally installed and (ii) is immediately deleted from such computer as soon as those  
repairs or maintenance are complete. You may make one copy of the Software for  
backup purposes only.  
Termination: Without prejudice to its other rights,ALK may terminate this License if  
you fail to comply with these terms and conditions. In that situation, you must destroy  
all copies of the Software.  
Choice of Law: This License is governed by the laws of England.  
-----------------------------------------------------------------------------  
End User License Agreement for NAVTEQ European Data  
For Portable Navigation Device Applications  
Copyright: United States copyright law and international treaty provisions protect  
the Software.You agree that no title to the intellectual property in the Software is  
transferred to you.You further acknowledge that title and ownership rights will remain  
the exclusive property of ALK, and you will not acquire any rights to the Software  
except as expressly set out in this License. You agree that any copies of the Software  
will contain the same proprietary notices that appear on and in the Software.  
The data (“Data”) is provided for your personal, internal use only and  
not for resale. It is protected by copyright, and is subject to the following  
terms and conditions which are agreed to by you, on the one hand, and ALK  
Technologies Inc. (“ALK”) and its licensors (including their licensors and  
suppliers) on the other hand.  
Prohibited Use: Unless you have ALK's prior written permission, you may not (i) use,  
copy, modify, alter, or transfer the Software or accompanying documentation, except  
as expressly permitted in this License; (ii) translate, disassemble, decompile, or reverse  
engineer the Software (iii) sublicense or lease the Software or its documentation; or  
(iv) use the Software in a multi-user or networked environment or on a rental basis or  
in a time-sharing or computer service business.  
© 2006 NAVTEQ. All rights reserved.  
TERMS AND CONDITIONS  
Personal Use Only. You agree to use this Data together with COPILOT® LIVE for  
the solely personal, non-commercial purposes for which you were licensed, and not  
for service bureau, time-sharing or other similar purposes. Accordingly, but subject to  
the restrictions set forth in the following paragraphs, you may copy this Data only as  
necessary for your personal use to (i) view it, and (ii) save it, provided that you do not  
remove any copyright notices that appear and do not modify the Data in any way. You  
agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse  
engineer any portion of this Data, and may not transfer or distribute it in any form, for  
any purpose, except to the extent permitted by mandatory laws.  
LimitedWarranty: ALK warrants that the Software will perform substantially in  
accordance with the accompanying written materials for a period of 30 days from the  
date of purchase. Any implied warranties relating to the Software are limited to such  
30 day period provided that limitation is permitted by applicable law.  
End-User Remedies: If the Software does not conform to the "LimitedWarranty"  
above,ALK's entire liability and your sole and exclusive remedy will be, at ALK's option,  
either to (i) correct the error, or (ii) help you work around the error, or (iii) accept a  
return and issue a refund through your retailer.The LimitedWarranty is void if failure  
- 45 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions. Except where you have been specifically licensed to do so by ALK,  
and without limiting the preceding paragraph, you may not (a) use this Data with  
any products, systems, or applications installed or otherwise connected to or in  
communication with vehicles, capable of vehicle navigation, positioning, dispatch,  
real time route guidance, fleet management or similar applications; or (b) with or in  
communication with any positioning devices or any mobile or wireless-connected  
electronic or computer devices, including without limitation cellular phones, palmtop  
and handheld computers, pagers, and personal digital assistants or PDAs.  
Governing Law. The above terms and conditions shall be governed by the laws of  
the Netherlands, without giving effect to (i) its conflict of laws provisions, or (ii) the  
United Nations Convention for Contracts for the International Sale of Goods, which  
is explicitly excluded. You agree to submit to the jurisdiction of the Netherlands for  
any and all disputes, claims and actions arising from or in connection with the Data  
provided to you hereunder.  
----------------------------------------------------------------------------------------  
Software License Agreement for FONIXTEXTTO SPEECH ENGINE  
Warning. The Data may contain inaccurate or incomplete information due to the  
passage of time, changing circumstances, sources used and the nature of collecting  
comprehensive geographic data, any of which may lead to incorrect results.  
IMPORTANT! READTHIS LICENSE AGREEMENT BEFORE OPENINGTHIS  
SOFTWARE PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE  
SOFTWARE,YOU INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.  
NoWarranty. This Data is provided to you “as is,” and you agree to use it at  
your own risk. ALK and its licensors (and their licensors and suppliers) make no  
guarantees, representations or warranties of any kind, express or implied, arising by  
law or otherwise, including but not limited to, content, quality, accuracy, completeness,  
effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be  
obtained from this Data, or that the Data or server will be uninterrupted or error-free.  
SOFTWARE LICENSE AGREEMENT  
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"), but  
may be superseded by a separate license agreement that you and Fonix have signed.  
The software in this packet ("Software") and its media and documentation (collectively,  
the "Product") are protected by copyright and other intellectual property laws and  
international treaties. You have no title to, or ownership of, the Product, other than its  
physical media. Fonix reserves all rights not specifically granted in this Agreement.  
Disclaimer ofWarranty: ALK AND ITS LicensORS (INCLUDINGTHEIR LicensORS  
AND SUPPLIERS) DISCLAIM ANYWARRANTIES, EXPRESS OR IMPLIED, OF  
QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE OR NON-INFRINGEMENT. Some States,Territories and Countries do not  
allow certain warranty exclusions, so to that extent the above exclusion may not apply  
to you.  
USE AND RESTRICTIONS: You may operate the Software on only one computer.  
However, if you have purchased a network or multiple-user license, you may load  
and use as many single-use copies and/or support as many concurrent users, in the  
aggregate, as are authorized by such license. You may make only one copy of the  
Software, retaining the Fonix CD or other media for storage and back-up purposes.  
The Software does not include updates, maintenance, or support, which may be  
separately available. This Software and its voice output are for your personal, individual  
use only. You are not permitted to broadcast or distribute the voice output of the  
Software (i.e., synthesized speech) to more than one person or to use the Software's  
voice output for any commercial purposes. You may not modify, adapt, translate, rent,  
lease, loan, resell for profit, distribute, network, or create derivative works based on  
any part of the Software. You may not reverse engineer, decompile, or disassemble the  
Software.  
Disclaimer of Liability: ALK AND ITS LicensORS (INCLUDINGTHEIR LicensORS  
AND SUPPLIERS) SHALL NOT BE LIABLETOYOU: IN RESPECT OF ANY CLAIM,  
DEMAND OR ACTION, IRRESPECTIVE OFTHE NATURE OFTHE CAUSE OFTHE  
CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES,  
DIRECT OR INDIRECT,WHICH MAY RESULT FROMTHE USE OR POSSESSION  
OFTHE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS  
OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES ARISING OUT OFYOUR USE OF OR INABILITYTO  
USETHIS INFORMATION,ANY DEFECT INTHE INFORMATION, ORTHE BREACH  
OFTHESETERMS OR CONDITIONS,WHETHER IN AN ACTION IN CONTRACT  
ORTORT OR BASED ON AWARRANTY, EVEN IF ALK OR ITS LicensORS HAVE  
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES. Some States,Territories  
and Countries do not allow certain liability exclusions or damages limitations, so to  
that extent the above may not apply to you.  
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under  
normal use, free from defects in material and workmanship for one year from the date  
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,  
will be replacement of the defective media without charge. EXCEPT FORTHIS  
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,  
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely  
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING  
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED  
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE LICENSE FEEYOU  
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,  
Export Control. You agree not to export from anywhere any part of the Data  
provided to you or any direct product thereof except in compliance with, and with all  
licenses and approvals required under, applicable export laws, rules and regulations.  
Entire Agreement. These terms and conditions constitute the entire agreement  
between ALK (and its licensors, including their licensors and suppliers) and you  
pertaining to the subject matter hereof, and supersedes in their entirety any and all  
written or oral agreements previously existing between us with respect to such subject  
matter.  
- 46 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,  
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR  
SUCH LOSS OR DAMAGE.  
may make a single back-up or archival copy of the Software for back-up purposes only.  
You may not transfer this Software or assign this License Agreement to another party.  
You are NOT permitted, during the term of this License Agreement and thereafter to:  
ꢀ Use the Software on a network or file server.  
The above limitations may be superseded by law in some jurisdictions.  
ꢀ Use or copy the Software or the accompanying documentation except as provided in  
this License Agreement.  
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying  
materials are provided with Restricted Rights. Use, duplications, or disclosure by the  
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe  
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or  
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights  
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at  
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.  
ꢀ Alter, merge, modify, or adapt the Software or the accompanying documentation in  
any way including disassembling or decompiling this Software.  
ꢀ Loan, lease, sell, transfer, or sublicense the Software or the accompanying  
documentation.  
ꢀ Copy, loan, lease, sell, transfer, or sublicense any output of this Software (including  
but not limited to printed maps and driving itineraries); However, you may provide  
a limited number of printed copies (up to 10) of a single trip to family members or  
traveling companions.  
GENERAL: If any term of this Agreement is found void or unenforceable, all other  
terms shall remain in full force and effect. This Agreement shall be governed by the  
internal laws of Utah. If you breach any term of this Agreement, Fonix may terminate  
this license and you must return all copies of the Product to Fonix.  
ꢀYou are not permitted to use the Software for motor-carrier tariff or routing  
purposes.  
ꢀ Electronic reproduction and transmission of output to remote locations are not  
permitted.  
ALK retains all rights not expressly granted. Nothing in this License Agreement  
constitutes a waiver of ALK's rights under the U.S. copyright laws or other applicable  
copyright laws or any other federal or state law.  
ALKTechnologies, Inc. LICENSE AGREEMENT  
CoPilot Live with AUSTRALIAN DATA  
LicensES: 1 User  
THIS IS A LEGAL AGREEMENT BETWEENYOU,THE USER (either an individual or an  
entity),AND ALKTechnologies, Inc. ("ALK"). IFYOU DO NOT AGREETOTHETERMS  
OFTHIS LICENSE, DO NOT INSTALLTHE SOFTWARE. Promptly return the package  
and accompanying materials (including written materials and containers) to the dealer  
from which you obtained them for a full refund.  
2.Term:  
This License is effective upon receipt by you of the Software and upon opening the  
package. The License is effective until terminated. You may terminate this License at  
any time by returning all copies of the Software, and any portions thereof, to ALK. The  
License terminates automatically if you fail to comply with any of the terms of this  
License Agreement. You agree upon such termination to return or destroy this CD-  
ROM and all other copies of the Software and certify in writing to ALK that you have  
done so.  
INSTALLINGTHIS SOFTWARE INDICATESYOUR ACCEPTANCE OFTHETERMS  
OFTHIS LICENSE.  
1. Grant of License:  
3. LimitedWarranty:  
This ALK License Agreement ("License") is a single-user, non-exclusive, non-transferable  
license agreement and not an agreement for sale.ALK hereby licenses the on-line User  
Guide and CD-ROM software identified above (collectively, "the Software") to you  
under the following terms and conditions.  
ALK warrants that all media on which the Software is furnished shall, for a period of  
90 days from delivery (the "Warranty Period") be free, in normal use, from defects in  
material and workmanship. ALK will have no responsibility to replace any disc(s) that  
have been damaged by accident, abuse, or misapplication.  
The Software may not be loaded onto a network of any type. You may use the  
Software on any compatible personal computer, provided you use it on only one  
computer at a time. The Software is "in use" on a computer when it is loaded into the  
temporary memory (i.e., RAM) or installed into the permanent memory (e.g., hard disk,  
CD-ROM, or other storage device) of that computer. If the Software is permanently  
installed on the hard disk or other storage device of a computer (other than a network  
server) and one person uses that computer more than 80 percent of the time it is in  
use, then that person may also use the Software on a portable or home computer. You  
Customer Remedies:ALK's entire liability and your exclusive remedy shall be, at ALK's  
option, either (a) return of the price paid or (b) replacement of the media that does  
not meet ALK's LimitedWarranty, and that is returned to ALK with a copy of your  
receipt.  
Except as specifically provided above,ALK MAKES NO OTHERWARRANTY OR  
REPRESENTATION, EITHER EXPRESS OR IMPLIED,WITH RESPECTTOTHE  
SOFTWARE OR DOCUMENTATION, INCLUDING ANYWARRANTY ASTOTHE  
- 47 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENTWILL ALK BE LIABLE FOR DIRECT DAMAGES IN  
EXCESS OFTHE LICENSE FEE OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES ARISING OUT OFTHE USE OR INABILITYTO USE  
THE SOFTWARE OR DOCUMENTATION, EVEN IF ADVISED OFTHE POSSIBILITY  
OF SUCH DAMAGES. IN NO CASE SHALL ALK'S LIABILITY EXCEEDTHE  
AMOUNT OFTHE LICENSE FEE.  
USE AND RESTRICTIONS:You may operate the Software on only one computer.  
However, if you have purchased a network or multiple-user license, you may load  
and use as many single-use copies and/or support as many concurrent users, in the  
aggregate, as are authorized by such license. You may make only one copy of the  
Software, retaining the Fonix CD or other media for storage and back-up purposes.  
The Software does not include updates, maintenance, or support, which may be  
separately available. This Software and its voice output are for your personal, individual  
use only. You are not permitted to broadcast or distribute the voice output of the  
Software (i.e., synthesized speech) to more than one person or to use the Software's  
voice output for any commercial purposes. You may not modify, adapt, translate, rent,  
lease, loan, resell for profit, distribute, network, or create derivative works based on  
any part of the Software. You may not reverse engineer, decompile, or disassemble the  
Software.  
While the information contained in the Software was believed to have been correct at  
the time of publication,ALK cannot guarantee its accuracy and shall not be subject to  
liability for any errors or omissions. Information in the Software and its accompanying  
preprinted materials is subject to change without notice and does not represent a  
commitment or endorsement on the part of ALK. Routes and miles generated by the  
Software are not suitable for commercial truck use.  
LIMITEDWARRANTY: Fonix warrants that the Product's physical media will be, under  
normal use, free from defects in material and workmanship for one year from the date  
you purchased it. Fonix's entire liability, and your exclusive remedy under this warranty,  
will be replacement of the defective media without charge. EXCEPT FORTHIS  
LIMITEDWARRANTY, FONIX MAKES NOWARRANTIES, EXPRESS OR IMPLIED,  
AND DISCLAIMS ANY IMPLIEDWARRANTY OR MERCHANTABILITY OR FITNESS  
FOR A PARTICULAR PURPOSE. Fonix does not warrant that the product is entirely  
error-free. FONIX'STOTAL LIABILITY FOR ANY CLAIM OR DAMAGE ARISING  
OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE SHALL BE LIMITED  
TO DIRECT DAMAGES,WHICH SHALL NOT EXCEEDTHE LICENSE FEEYOU  
PAID. IN NO EVENT SHALL FONIX BE LIABLE FOR LOST PROFITS, LOST DATA,  
INTERRUPTIONS OF BUSINESS, OR ANY INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,  
REGARDLESS OFWHETHER FONIX HAS NOTICE OFTHE POTENTIAL FOR  
SUCH LOSS OR DAMAGE. The above limitations may be superseded by law in some  
jurisdictions.  
THEWARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN  
LIEU OF ALL OTHERS, ORAL ORWRITTEN, EXPRESS OR IMPLIED. No ALK dealer,  
distributor, agent, or employee is authorized to make any modification or addition to  
this warranty. Some jurisdictions do not allow the exclusion or limitation of implied  
warranties or limitation of liability for incidental or consequential damages, so the  
above limitation or exclusion may not apply to you.  
4. Licensee's Responsibility:  
You assume all responsibility for, and ALK shall not be liable for, all action taken,  
decisions made, and advice given as a result of your use of the Software.  
5. General:  
The export or re-export of the Software may be restricted by the laws of the United  
States and other countries, and you shall not export this Software in violation of any  
such applicable laws. This License Agreement is governed by the laws of the State of  
New Jersey.  
U.S. GOVERNMENT RESTRICTED RIGHTS:The Software and any accompanying  
materials are provided with Restricted Rights. Use, duplications, or disclosure by the  
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) ofThe  
Rights inTechnical Data and Computer Software clause at DFARS 252.227-7013 or  
subparagraphs (c)(1) and (2) of the Commercial Computer Software-Restricted Rights  
at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is Fonix Corporation at  
1225 Eagle GateTower, 60 East SouthTemple St., Salt Lake City, Utah 84111.  
-------------------------------------------------------------------------------------  
Software License Agreement for FONIXTEXTTO SPEECH ENGINE  
IMPORTANT! READTHIS LICENSE AGREEMENT BEFORE OPENINGTHIS  
SOFTWARE PACKET. BY OPENINGTHE SEALED PACKET OR USINGTHE  
SOFTWARE,YOU INDICATEYOUR ACCEPTANCE OFTHE ENTIRE AGREEMENT.  
GENERAL: If any term of this Agreement is found void or unenforceable, all other  
terms shall remain in full force and effect. This Agreement shall be governed by the  
internal laws of Utah. If you breach any term of this Agreement, Fonix may terminate  
this license and you must return all copies of the Product to Fonix.  
SOFTWARE LICENSE AGREEMENT  
This Agreement is a legal agreement between you and Fonix Corporation ("Fonix"),  
but may be superseded by a separate license agreement that you and Fonix have signed.  
The software in this packet ("Software") and its media and documentation (collectively,  
the "Product") are protected by copyright and other intellectual property laws and  
international treaties. You have no title to, or ownership of, the Product, other than its  
physical media. Fonix reserves all rights not specifically granted in this Agreement.  
-----------------------------------------------------------------------------------  
LICENSE AGREEMENT FORWHEREIS™ DATA  
1. GRANT OF LICENSE  
Telstra Corporation Limited (ABN 33 051 775 556) ("Telstra") through its agent Sensis  
Pty Ltd (ABN 30 007 423 912) ("Licensor") grants you a non-exclusive, non-transferable  
- 48 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
license to use the mapping data ("Whereis Data") contained in this CD-ROM on the  
following terms ("License"). The License commences when you click on the "I Agree"  
button at the end of these terms and continues until terminated in accordance with  
this agreement.  
provision of this agreement. Your rights under this agreement cease immediately upon  
termination of the License and you must immediately cease using theWhereis Data;  
and at the Licensor's election, return to the Licensor at the details described in clause  
2.5 or destroy all materials bearing or containing theWhereis Data and, if required by  
the Licensor, shall certify that theWhereis Data and all such copies have been returned  
or destroyed. Termination of the License does not affect any rights or remedies which  
accrued prior to termination.  
2. RIGHTS OF USE  
You may only use theWhereis Data for your own personal use. You may only install  
and use theWhereis Data on one device at any one time. You must not copy, reverse  
engineer, adapt, modify, distribute, publish in any form or permit any other person to  
use or deal with the whole or any part of theWhereis Data.  
6. GENERAL  
You may not assign or sub-license your rights under this License.This agreement  
constitutes the entire agreement between the parties.Any previous agreements,  
understandings and negotiations cease to have any effect.A provision of, or a right  
created under, this agreement may not be waived except in writing signed by the  
Licensor.This agreement is governed by the laws in force in the State ofVictoria,  
Australia. A reference to a person includes a reference to a firm, corporation or other  
corporate body.  
You must use reasonable steps to prevent any unauthorised copying or use of the  
Whereis Data; and immediately notify the Licensor if you become aware of any  
unauthorised copying or use of theWhereis Data by any person or of any other  
infringement of the Licensor's rights in relation to theWhereis Data.The contact  
details of the Licensor are as follows: Sensis Pty Ltd, 181-189Victoria Parade,  
Collingwood,Victoria 3066,Australia.  
3. PROPERTY AND OWNERSHIP  
All intellectual property rights (including copyright and any trade marks used by the  
Licensor andTelstra) in and to theWhereis Data are the sole and exclusive property  
of, or a use under license by, the Licensor (or its licensors). Except to the extent  
permitted by this License, you do not acquire any intellectual property rights in or to  
theWhereis Data.  
4. EXCLUSION OF LIABILITY  
To the extent permitted by law, the Licensor does not make any warranties of any  
kind, whether express or implied, including any implied warranty of merchantability  
or fitness of theWhereis Data for a particular purpose. Licensor's liability for breach  
of any condition or warranty implied by statute which cannot be excluded is (to the  
extent permitted by law) limited to, in the case of the supply of goods, the repair,  
replacement or re-supply of the goods or of equivalent goods or the payment of the  
cost of repairing or replacing the goods or of acquiring equivalent goods; and in the  
case of the supply of services, supplying the services again, or the payment of the cost  
of having the services supplied again, provided that there shall be no such limitation  
for breach of such a condition or warranty where the relevant law prohibits such  
limitation.  
Subject to this clause 4, the Licensor, its employees, agents and contractors will not be  
liable (whether in contract, tort or otherwise) to you or any other person for any loss,  
costs, damage or injury of any kind whatsoever (including incidental or consequential  
loss) wholly or partly arising out of or in connection with the use of or inability to use  
theWhereis Data.  
5.TERMINATION  
The Licensor may terminate the License immediately if you are in breach of any  
- 49 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Addonics Technologies Network Card ADU2N1G User Manual
a d s Speaker IE61 IE62 User Manual
ADTRAN Network Card 6540 SHDSL User Manual
Alliance Laundry Systems Washer CHM1766C User Manual
Amazon eBook Reader 23 000491 01 User Manual
American DJ DJ Equipment Saga User Manual
AOSafety Headphones E A RTONE 3A User Manual
Ativa Paper Shredder DQ61BA User Manual
Barco Camera Accessories R9864220 User Manual
BK Stereo Receiver AVR202 Plus User Manual