LAVAMAT L 16850
User Manual
Washer-dryer
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Contents
Instruction booklet
Safety information
Product Description
Detergent dispenser drawer
6
6
9
9
Control panel
10
Display
11
First use
13
Personalization
Acoustic signal
Child safety lock
13
13
13
Daily use - Washing
14
14
14
15
15
16
16
17
17
17
17
17
18
18
19
19
Load the laundry
Measure out the detergent and the fabric softener
Select the required programme by turning the programme selector dial
Select the Spin speed, RINSE HOLD or NIGHT CYCLE option
Selected the desired option
PREWASH option
STAIN option
SENSITIVE option
DAILY option
SUPER QUICK option
Select an additional rinse
Select the START/PAUSE
Select the DELAY START
Altering an option or a running programme
Interrupting a programme
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Contents
Cancelling a programme
19
19
20
Opening the door after the programme has started
At the end of the programme
Drying
21
21
21
21
22
22
Select the drying programme by pressing the programme selector dial
Select the automatic drying
Select the timed drying
At the end of the programme
Automatic washing and drying
Washing programmes
Programme information
Automatic drying programmes
Drying time
23
25
27
27
Preparing the wash cycle
Sorting the laundry
28
28
28
28
29
29
29
30
31
31
Temperatures
Before loading the laundry
Maximum loads
Laundry weights
Removing stains
Detergents and additives
Quantity of detergent to be used
Degrees of water hardness
Preparing the drying cycle
Laundry not suitable for drying
Drying symbols label
32
32
33
33
33
Drying cycle duration
Additional drying
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
5
Care and cleaning
Descaling
34
34
34
34
34
34
35
35
35
37
38
38
After each wash
External cleaning
Maintenance wash
Detergent dispenser drawer
Washing drum
Door seal
Drain pump
Water inlet filter
Frost precautions
Emergency emptying out
What to do if...
Technical Data
39
42
43
Consumption value
Installation
44
44
46
46
47
47
49
49
50
Unpacking
Positioning and levelling
Water inlet
Water-stop device
Water drainage
In the interest of the environnement
Electrical connection
Permanent connection
Enviroment concerns
Packaging materials
Old machine
51
51
51
51
Ecological hints
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Safety information
Instruction booklet
Safety information
Prior to using for the first time
• The safety of AEG/ELECTROLUX appliances complies with the industry
standards and with legal requirements on the safety of appliances. However,
as manufacturers, we feel it is our duty to provide the following safety notes.
You MUST read them carefully before installing or using the appliance.
• It is most important that this instruction book should be retained with the
appliance for future reference. Should the appliance be sold or transferred to
another owner, or should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant
warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the machine for any damage incurred during
transport. Never connect up a damaged machine. If parts are damaged,
contact your supplier.
• If the appliance is delivered in the winter months when there are minus
temperatures: Store the washer-dryer at room temperature for 24 hours
before using for the first time.
General safety
• It is dangerous to alter the specifications or attempt to modify this product in
any way.
• During high temperature washing and drying programmes programmes
the door glass may get hot. Do not touch it!
• Make sure that small pets do not climb into the drum. To avoid this, please
check into the drum before using.
• Any objects such as coins, safety pins, nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the
machine.
• Only use the advised quantities of fabric softener and detergent. Damage to
the fabric can ensue if you over-fill. Refer to the manufacturer’s
recommendations of quantities.
• Wash small items such as socks, laces, washable belts etc in a washing bag or
pillow case as it is possible for such items to slip down between the tub and
the inner drum.
• Do not use your washer-dryer to wash and dry articles with whalebones,
material without hems or torn material.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
7
• Always unplug the appliance and turn off the water supply after use, clean
and maintenance.
• Under no circumstances should you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Centre. Always insist on genuine
spare parts.
Installation
• When unpacking the appliance, check that it is not damaged. If in doubt, do
not use it and contact the Service Centre.
• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if this is not adhered to. See relevant
section in the user manual.
• After having installed the appliance, check that it is not pressing or standing on
its electrical supply cable, inlet hose and drain hose.
• If the machine is situated on a carpeted floor, please adjust the feet in order to
allow air to circulate freely
• Always be sure, that there is no water leakage from hoses and their connections
after the installation.
• If the appliance is installed in a location subject to frost, please read the
“dangers of freezing” chapter.
• Any plumbing work required to install this appliance should be carried out by a
qualified plumber or competent person.
• Any electrical work required to install this appliance should be carried out by a
qualified electrician or competent person.
Use
• This appliance is designed for domestic use. It must not be used for purposes
other than those for which it was designed.
• Only wash and dry fabrics which are designed to be machine washed. Follow
the instructions on each garment label.
• Do not overload the appliance. See the relevant section in the user manual.
• Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras must NOT be machine
washed.
• Garments which have been in contact with volatile petroleum products
should not be machine washed. If volatile cleaning fluids are used, care
should be taken to ensure that the fluid is removed from the garment before
placing in the machine.
• As some duvets and eiderdowns should be washed/dried in large commercial
machines because of their bulk, please check with the manufacturer of the
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Safety information
item before washing in a domestic machine.
• The users should always check that they have not left their gas lighters
(disposable or otherwise) in their clothing.
• Never tumble dry items that have had contact with chemicals such as dry
cleaning fluid.These are of a volatile nature and could cause an explosion.
Only tumble dry items which have been washed in water or require airing.
• Plastic detergent dispensers should not remain in the drum during the drying
cycle, as the plastic used is not designed to withstand the heat. If you wish to
wash-through-to-dry you should use the conventional detergent dispenser
drawer.
• Never pull the power supply cable to remove the plug from the socket;
always take hold of the plug itself.
• Never use the washer-dryer if the power supply cable, the control panel, the
working surface or the base are damaged so that the inside of the washer-
dryer is accessible.
Child Safety
• This appliance is not intended for use by person (including children) with
reduced physical sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• This washer-dryer is not intended for use by young children or infirm persons
without supervision.
• Young children should be supervised to ensure that they do not play with the
appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to
children - danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s reach.
• Make sure that children or pets do not climb into the drum. To avoid that
they could remain closed inside the
drum, the machine incorporates special
feature.
To activate this device, rotate the
button (without pressing it) inside the
door clockwise until the groove is
horizontal. If necessary use a coin. To
disable this device and restore the
possibility of closing the door, rotate
the button anti-clockwise until the
groove is vertical.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product description
9
Product description
Your new appliance meets all modern requirements for effective treatment of
laundry with low water, energy and detergent consumption.
Detergent dispenser drawer
Control panel
Rating plate
Drain pump
4
5
6
1
2
3
Door opening handle
Adjustable feet
Detergent dispenser drawer
Compartment for detergent (used for prewash) or stain remover. The
prewash detergent is added at the beginning of the wash programme. The
stain remover is added during the main wash in programmes with STAIN-
option.
Compartment for powder or liquid detergent used for main wash.
Compartment for liquid additives (fabric softener, starch).
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Control panel
Control panel
9
2
3
4
5
6
7
8
1
The control panel is illustrated above. It shows the programme selector dial as well
as the different buttons, the pilot lights and the display. These are represented by
relevant numbers which are explained in the table below.
1
2
3
4
5
Programme selector dial
SPIN button
6
7
8
9
OK button
START/PAUSE button
DELAY START button
Display
AUTODRY button
DRYING TIME button
OPTION button
Symbols on the Control Panel:
= Cold
= handwash
Download from Www.Somanuals.com. All Manuals Search And Download.
Display 11
Display (9)
9.2
9.1
9.4
9.3
9
9.9
9.8
9.5
, NIGHT CYCLE
9.6
9.7
9.1
9.2
Spin Speed indicator, RINSE HOLD
- symbols
Drying degree indicator allowed by the set programme, IRON DRY
CUPBOARD DRY and EXTRA DRY - symbols, selectable by
,
pressing the button 3 and indicator «AUTO», connected to the drying
programme and the button 4.
9.3
Programme progress indicator: PREWASH , MAIN WASH , RINSE , SPIN
OVERDOSAGE , DRYING , ANTI-CREASE phase - symbols
The programme progress indicator shows the washing or drying phases of the
selected programme.
During a cycle, a black dash blinks under the phase symbol of the running
programme. At the end of each washing phase, the black dash under the
corresponding symbol becomes fixed.
If the OVERDOSAGE symbol lights up at the end of the programme, it indicates
that too much detergent has been used.
DOOR
- symbol (Door locked)
9.4
This symbol indicates if the door can be opened:
●
●
the symbol is on: the door cannot be opened. The appliance is performing a
washing programme.
the symbol is off: the door can be opened. The washing programme is
finished.
Options: PREWASH , STAIN , SENSITIVE , DAILY
EXTRA RINSE - symbols.
, SUPER QUICK
,
9.5
9.6
CHILD SAFETY LOCK
- symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Display
9.7 The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for
example 2 .05 ). The duration is calculated automatically on the basis of the
maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
Delay start
The selected delay (20 hours max) set by pressing the relevant button appears on
the display for a few seconds (for example 9 0’), then the duration of the
previously selected programme is displayed. The DELAY START symbol will appear
on the display. The delay time value decreases by one unit every hour and then,
when remains 1 hour, the time decreases every minute.
Selected drying time
After selecting a drying programme, the drying time is displayed in minutes
and/or hours. After the programme has started the time remaining is updated
every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for a few seconds and the yellow light of button 7
starts blinking.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
example E2 0 (see chapter «What to do if...»).
End of the programme
When the programme has finished a blinking zero 0 is displayed, the DOOR
symbol disappears and the door can be opened.
If your laundry is not removed during 10 minutes after the programme is
finished, the backlight of the display switches off and the energy saving system
will be enabled. Only the pilot light of the button 8 is blinking to indicate that
the appliance has to be switched off. By pressing any buttons the appliance will
come out from the energy saving status and you could set another washing
programme or swich off the appliance.
9.8
9.9
DRYING TIME DURATION
DELAY START - symbol
- symbol
Download from Www.Somanuals.com. All Manuals Search And Download.
Use 13
First Use
Ensure that the electrical and water connections comply with the installation
instructions.
Remove the polystyrene block and any material from the drum.
Run a cotton cycle at 90°C or 95°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub. Pour 1/2 a measure
of detergent into the dispenser drawer and start the machine.
Personalization
Acoustic signals
The machine is provided with the acoustic device, which sounds in the following
cases:
●
at the end of the cycle
in the event of operating problems
●
By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the
acoustic signal is deactivated (except for the events of operating problems).
By pressing the same buttons again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unsupervised without having the
worry that children might be injured by or cause damage to the appliance.
This function remains able also when the washer-dryer is not working.
There are two different ways to set this option:
●
before pressing the button 7: it will be impossible to start the machine.
●
after pressing the button 7 it will be impossible to change any other
programme or option.
To enable (disable) this option press simoultaneously for about 6 seconds 4 and 5
buttons until the CHILD SAFETY LOCK symbol appears (disappears) on (from) the
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Use
Daily Use
Load the laundry
1. Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out as
much as possible.
2. Close firmly the door. You must hear a click
during closing.
Attention! Do not embed the laundry
between the door and the rubber joint.
Measure out the detergent and the fabric softener
Your new appliance was designed to reduce water, energy and detergent
consumption.
1. Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment
and, if you wish
to carry out the prewash phase or
STAIN action, pour the detergent or the
stain remover into the compartment
marked
.
2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use 15
WASHING
Select the required programme by pressing the programme
selector dial (1)
You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.
By selecting a programme, the programme progress indicator symbols and the
symbols corresponding to the drying degree allowed by the set programme
appear on the display.
The pilot light of button 7 starts blinking and the display shows the duration of
the selected programme.
The selector dial can be turned either clockwise or anticlockwise.
Position = Cold wash
Position O= Reset programme/Switching OFF of the machine.
At the end of the programme the selector dial must be turned to
position O, to switch the machine off.
consult the
For the description of each washing programmes of the selector dial,
chapter «Washing programmes».
Attention!
If you turn the programme selector dial to another programme when the
machine is working, the yellow pilot light of button 7 will blink 3 times and the
message Err is displayed on the display to indicate a wrong selection. The
machine will not perform the new selected programme.
Select the SPIN speed, RINSE HOLD or NIGHT CYCLE option
(button 2)
When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry
to be spun at a speed different from the one proposed by the washer-dryer.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. At the end of the programme, a blinking
«0» and RINSE HOLD symbol appear on the display, the DOOR symbol (door
locked) remains lit, the pilot light of button 7 goes off and the door is blocked to
indicate that the water must be emptied out.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 Use
NIGHT CYCLE: by selecting this option, the machine will not drain the water of
the last rinse, so as not to wrinkle the laundry. As all spinning phases are
suppressed, this washing cycle is very noiseless and it can be selected at night or
in times with a more economical power rate. In some programmes the rinses will
be performed with more water. At the end of the programme, a blinking «0» and
RINSE HOLD symbol appear on the display, the DOOR symbol remains lit, the
pilot light of button 7 goes off and the door is blocked to indicate that the
water must be emptied out.
RINSE HOLD or NIGHT CYCLE option is not selectable with a NON -STOP
programme (see Drying section).
To empty out the water, please read chapter «At the end of the
programme».
Select the desired option by pressing the button 5 and confirm
your choice by pressing the button 6
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of
the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme
or any other option, is selected, the Err message is displayed for few seconds
and the yellow pilot of button 7 light starts blinking.
You must select the options after you have selected the programme but before
pressing the button 7. Press button 5: all the option symbols, available for the
set programme, appear on the display.
To scroll all the available options, press the button 5. The corresponding symbol
appears on the display and starts blinking.
Press the button 6 to activate and confirm your choice. A black dash appears
under the selected symbol to indicate that this option has been set. Press the
same button to deactivate the option.
After selecting the options, wait about few seconds until the display gets back to
the default status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the
«Washing programmes».
chapter
PREWASH option
Select this option if you wish your laundry to be prewashed at 30°C before the
main wash.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use 17
The Prewash ends with a short spin in programmes for COTTON and SYNTHETIC
fabrics, whereas in the programmes for DELICATE fabrics the water is only
drained. The relevant symbol will appear on the display.
STAIN option
Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase).
This option is not available with a temperature lower than 40°C.
Attention! If you wish to perform a programme with the stain option, pour
stain remover into compartment . STAIN option is not selectable with
PREWASH option.
SENSITIVE option
By selecting this option the washing intensity will be reduced. The machine adds
one rinse in the programmes for COTTONS and SYNTHETICS.
This option is non selectable with EXTRA RINSE option.
This option is recommended for non fast coloureds items and for frequently
washed items.
DAILY option
By selecting this option, you will be able to short the washing duration for «daily
soiled laundry». The display will show the shorted washing time. To be used for
daily soiled laundry. We recommend you to reduce the laundry load.
SUPER QUICK option
By selecting this option, it will be possible to short the washing duration for
«lightly soiled laundry».
The display will show the shorted washing time. To be used for very lightly soiled
laundry only.
Select an additional rinse (EXTRA RINSE)
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
If you wish to activate this option permanently for every washing cycle, press
simoultaneously 2 and 3 for about 6 seconds: the symbol EXTRA RINSE appears
on the display. This option remains active permanently.
If you wish to cancel it press the same buttons untill the symbol disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 Use
Press the START/PAUSE (button 7)
To start the selected programme, press the button 7; the corresponding red pilot
light stops blinking.
The DOOR symbol appears on the display to indicate that the appliance has
started operating and the door is locked.
To interrupt a programme which is running, press the button 7: the
corresponding red pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press the
button 7 again.
If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the yellow pilot light of the button 7 blinks 3
times, the message Err is displayed for about 2 seconds.
Select the DELAY START bypressing the button 8
Before you start the programme, if you wish to delay the start, press the
button 8 repeatedly, to select the desired delay.
The corresponding symbol will appear on the display
The selected delay time value (up to 20 hours) will appear on the display for
about 3 seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you
press the button 7.
You can modify or cancel the delay time at any moment, before you press the
button 7.
If you wish to add laundry in the machine during the delay time, press the
button 7 to set the machine to pause. When the DOOR symbol disappears, the
door can be opened. After you have closed the door, press the button 7 again.
The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by pressing this button.
SELECTING THE DELAYED START:
●
●
●
Select the programme and the required options;
Select the delay start;
Press button 7: the machine starts its hourly countdown. The programme will
start after the selected delay has expired.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use 19
CANCELLING THE DELAYED START:
●
●
●
set the washer-dryer to PAUSE by pressing the button 7;
press the button 8 until the symbol 0’ is displayed;
press the button 7 again to start the programme.
The button 8 cannot be selected with DRAIN programme.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washer-dryer by pressing the button
7.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O and then to the new programme position. Start
the new programme by pressing the button 7 again. The washing water in the
tub will be not emptied out.
Interrupting a programme
Depress the button 7 to interrupt a programme which is running, the
corresponding light starts blinking. Press the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 7.
●
if the DOOR symbol disappears, the door can be opened.
●
if the DOOR symbol remains lit, it means that the machine is already heating,
that the water level is above the bottom edge of the door. In this case the
door cannot be opened.
●
If you cannot open the door but you need to open it, you have to switch the
machine off by turning the selector dial to O. After a few minutes the door
can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again
and to press button 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 Use
At the end of the programme
The machine stops automatically, the pilot light of button 8 and the DOOR
symbol go off, a blinking «0» appears on the display and the acoustic signal
sounds for some minutes.
If you have choosen a programme or an option that ends with water in the tub,
:
follow the below instruction to empty the water out
●
●
●
●
●
turn the programme selector dial to O
select the DRAINING or SPINNING programme
reduce the spin speed if needed, by pressing the relevant button
press the button 7
when the programme has finished the display shows a blinking «0». On the
display the DOOR symbol disappears and the door can be opened.
Turn the programme selector dial to O to switch the machine off. Remove the
laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.
Download from Www.Somanuals.com. All Manuals Search And Download.
Use 21
DRYING only
The recommended loads size is 3.5 kg for linen and cottons and 2 kg for
synthetics. Note! Only with the timed drying, it is possible also to dry up
to 5 kg of cotton otems (see the drying time table).The water tap must be
open and the drain hose must be positioned in the sink or connected to the
drain pipe.
Select the drying programme by turning the programme selector
dial (1)
Turn the programme selector dial to the required programme for Cottons or
Synthetics in the Drying sector. The DRYING and the ANTI-CREASE symbols
corresponding to the phases making up the programme appear on the display. In
the same time, the symbols corresponding to the level degrees allowed by the set
programme/fabric and «AUTO» lights up.
Select the automatic drying by pressing the button 3
With this button you can select the degree of dryness by an electronic drying.
The machine adapts automatically the duration of the drying cycle to the
selected degree of dryness.If you press button 3, a black dash appears under the
selected symbol to indicate that a degree has been set. «AUTO» desappears. The
display shows the duration of the drying cycle. The pilot light of button 7 starts
blinking. Depress then button 7 to start the programme. A black dash flashes
under the DRYING symbol.
Select the timed drying by pressing the button 4
With this button is possible to select the duration of the drying cycle from 10 to
250 minutes (4.10) according to the type of fabric (cotton or synthetic). Depress
button 4, until the time you want appears on the display. For Cottons you can
(
).
select a drying time from 10 minutes to 250 minutes 4.10 For Synthetics you
(
).
can select a drying time from 10 minutes to 130 minutes 2 .10 Every time you
press this button the drying time increases by 5 mins and the DRYING TIME
DURATION symbol appears for few seconds on the display near the duration
value.Depress then button 7 to start the programme. A black dash flashes under
the DRYING symbol.
Note!
The programme time will automatically increase by up to 2 minutes, this is quite
normal.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 Use
Note!The different type of cottons (towelling, sheets, shirts, and so on) or
eventual laundry rolling up during spinning phase may cause a not uniform
dryness. So, in the exceptional case that at the end of the cycle the laundry
remains slightly wet, we suggest you to stretch the items rolled up out, to
redistribute evenly the laundry in the drum and to select an additional drying
cycle of 20-30 minutes.
At the end of the programme
At the end of the drying programme, the buzzer sounds. A blinking «0» appears
on the display. At this point, begins an anti-crease phase which lasts about 10
minutes. During this time the ANTI-CREASE symbol appears on the display and
the door is locked. The DOOR symbol remains lit.
Note!
If you whish to open the door before or during the anti-crease phase or to inter-
rupt it, press any button or turn the programme selector dial to any programme
position (except «O»), the door can be immediately opened. Turn the selector
dial to the «O» position to switch the machine off. Remove the laundry.
Automatic washing and drying (NON-STOP programme)
For NON-STOP programmes, the recommended load size is 3.5 kg for cotton and
2 kg for synthetics. Note! Only with the timed drying, it is possible also to
dry up to 5 kg of cotton itens (see the drying time table).Do not use a
dosing device/ball when carrying out a washing & drying programme.
Select the washing and the drying programme by turning the
programme selector dial (1) and buttons 3 and 4.
Switch the machine on by turning the selector dial to the selected washing
programme/temperature with the required options.
If possible, do not select a spin speed lower than that proposed by the appliance
to avoid a too long drying time so saving energy.In any case the reduction of
the spin speed is only possible after selecting drying.
The lowest values you can select are the following:
- with automatic drying: 1000 r.p.m. for cottons and synthetics
- with timed drying: 1000 r.p.m. for cottons and 800 r.p.m. for synthetics
Select the drying time or dryness degree suitable to your laundry and start the
programme by pressing button 7.At the end of the programme, follow the
indications given in the corresponding previous chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes 23
Washing programmes
Programme/
Type of laundry
Temperature
Description of the
programme
Options
SPIN REDUCTION/RINSE Main wash, Rinses
HOLD/NIGHT CYCLE
PREWASH - STAIN -
SENSITIVE - EXTRA RINSE Max Load: 7 Kg
Long spin at maximum
speed
White cotton
COTTON/LINENS
95° - 60°
(heavily soiled cotton
items)
DAILY, SUPER QUICK(**) ** Reduced Load: Kg 3.5
Main wash,
SPIN REDUCTION/RINSE
Rinses
HOLD/NIGHT CYCLE
Long spin at maximum
PREWASH - STAIN-
speed
White and coloured
40-60 MIX
cotton nornally
soiled
40°
SENSITIVE - EXTRA RINSE
Max Load: 7 Kg
SPIN REDUCTION/RINSE Main wash, Rinses
HOLD/NIGHT CYCLE
PREWASH - STAIN -
SENSITIVE - EXTRA RINSE Max Load: 7 Kg
Long spin at maximum
speed
Coloured cotton
(normally soiled cotton
items)
COTTON/LINENS
60° - 40° - 30°
DAILY, SUPER QUICK(**) ** Reduced Load: Kg 3.5
SPIN REDUCTION/RINSE Main wash
EASY-CARES
(Synthetics)
60° - 50° -
40° - 30°
HOLD/NIGHT CYCLE
Rinses
Synthetic or mixed
fabrics
PREWASH - STAIN (*) - Short spin
SENSITIVE - EXTRA RINSE Max Load: 3.5 Kg
DAILY, SUPER QUICK(**) ** Reduced Load: Kg 2
Main wash
SPIN REDUCTION/
Rinses
EASY IRON PLUS
40°
Synthetic or mixed
fabrics
RINSE HOLD
Short spin
PREWASH - EXTRA RINSE
Max Load Kg 1
SPIN REDUCTION/RINSE Main wash
HOLD/NIGHT CYCLE Rinses
PREWASH - STAIN (*) - Short spin
DELICATES
40° - 30°
Delicate fabrics: for
example curtains
EXTRA RINSE
Max Load: 3.5 Kg
DAILY, SUPER QUICK(**) ** Reduced Load: Kg 2
*
Stain option can be selected only at the temperature of 40°C or higher.
** If you select the SUPER QUICK option we recommend you, to reduce the maximum
load as indicated above. Full loading possible however with somewaht reduced
cleaning results.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 Washing programmes
Washing programmes
Programme/
Type of laundry
Temperature
Description of the
programme
Options
Garments bearing the
«Pure new wool, non-
shrink, machine
washable» or
Main wash
Rinses
WOOL PLUS
30° - Cold
SPIN REDUCTION/RINSE
HOLD/NIGHT CYCLE
Short spin
Max Load Kg 2
«Handwash» label
Main wash
SPIN REDUCTION/RINSE Rinses
SILK
30°
Silk items to be gentle
washed and spun
HOLD/NIGHT CYCLE
Short spin
Max Load Kg 1
SPIN REDUCTION/
RINSE HOLD/NIGHT CYCLE Short spin
Rinses
DELICATE
RINSES
Separate rinse cycle for
hand washed items
EXTRA RINSE
Max Load Kg 7
Drain
Max Load Kg 7
For emptying out the
water
DRAIN
SPIN
Drain and long spin at
maximum speed
Max Load Kg 7
Separate spin for
cottons
SPIN REDUCTION
SPIN REDUCTION
Main wash
Rinses
Short spin
20 MIN - 3 KG
30°
For slightly soiled
fabrics, except wool
Max Load Kg 3
Main wash
Rinses
Short spin
QUICK
INTENSIVE
60° - 40°
To use for cotton or
mixed fabrics, slightly
soiled or worn only once
SPIN REDUCTION/
RINSE HOLD
EXTRA RINSE
Max Load Kg 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing programmes 25
Washing programmes
Programme/
Type of laundry
Temperature
Description of the
programme
Options
Main wash
Rinses
Long spin at maximum
speed
Max Load Kg 7
SPIN REDUCTION/RINSE
HOLD/NIGHT CYCLE
PREWASH - STAIN -
White and fast
ECONOMY
60°
coloured cotton -
economy, lightly-
normally soiled items
For cancelling the pro-
SENSITIVE - EXTRA RINSE
gramme which is run-
O/OFF
ning or to switch the
machine off
Programme information
Special programme for white and coloured cotton suitable
for different washing temperatures. This programme can be
used for laundry, which should be washed at 40°C or 60°C
separately. So, you can put into the drum the maximum
load capacity in order to save energy and water. You will
obtain the same good washing result as a normal
programme at 60°C.
MIX 40-60
Selecting this programme the laundry is gently washed
and spun to avoid any creasing. In this way ironing is
easier. Furthermore the machine will perform additional
rinses.
EASY IRON PLUS
Download from Www.Somanuals.com. All Manuals Search And Download.
26 Programme information
Programme information
Washing programme for machine washable wool as well
as for hand washable woollens and delicate fabrics with
the «hand washing» care symbol
WOOL PLUS
(HANDWASH)
.
Special program at 30°C, duration - approx. 20 minutes,
ideal for laundry to be refreshed: e.g. a sport jacket worn
only once or slightly soiled or new garments.
20 MIN. - 3 KG
Quick washing programme, to be used for lightly soiled
white/fast coloured cottons and mixed fabrics.
QUICK INTENSIVE
This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows to obtain a
good washing efficiency by saving energy.
ECONOMY
DELICATE RINSES
DRAIN
With this programme it is possible to rinse and spin
garments which have been washed by hand. The machine
performs 3 rinses, followed by a final short spin. The spin
speed can be reduced by relevant button.
For emptying out the water of the last rinse in
programmes with the RINSE HOLD and NIGHT CYCLE
option. Before selecting this programme the selector dial
must be turned to O.
Separate spin for hand washed cotton items and after
programmes with the RINSE HOLD and NIGHT CYCLE
option. Before selecting this programme the selector dial
must be turned to O. You can choose the speed by
pressing the relevant button to adapt it to the fabrics to
be spun.
SPIN
Download from Www.Somanuals.com. All Manuals Search And Download.
Drying programmes and drying time 27
Automatic drying programmes
Degree of drying
Type of fabric
Max Load
Extra dry
Cotton and linen
3.5 kg
Ideal for towelling materials (bathrobes, bath towels, etc)
Cotton and linen
3.5 kg
2 kg
(bathrobes, bath towels, etc)
Store dry
Suitable for items to put away
without ironing
Synthetics and mixed fabrics (jumpers,
blouses, underwear, household linen)
Iron dry
Suitable for ironing
Cotton and linen (sheets, tablecloths,
shirts, etc.)
3.5 kg
Drying times
Suggested
Max load
Type of fabric
Spin Speed drying time
in mins
Degree of drying
5 kg
1600
1600
1600
165 - 185
Cotton and linen
(bathrobes, bath towels,
etc)
3.5 kg
1.5 kg
85 - 95
Suitable for items
to put away with-
out ironing
35 - 45
2 kg
1 kg
1200
1200
65 - 75
30 - 40
Synthetics and mixed
fabrics
5 kg
1600
1600
1600
135 - 155
65 - 75
Cotton and linen
(sheets, tablecloths, shirts,
etc.)
Suitable
for ironing
3.5 kg
1.5 kg
30 - 40
In compliance with EC directive EN 50229 the cotton reference programme for the
data entered in the Energy Label must be tested dividing the maximum washing load by
two equal parts and drying with TIMED DRYING each of them.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 Preparing the wash cycle
Preparing the wash cycle
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s
washing instructions. Sort the laundry as follows: whites, coloureds, synthetics,
delicates, woollens.
Temperatures
for normally soiled white cottons and linen (e.g. tea cloths,
towels, tablecloths, sheets...).
95° or 90°
for normally soiled, colour fast garments (e.g. shirts, night
dresses, pyjamas....) in linen, cotton or synthetic fibres and
for lightly soiled white cotton (e.g. underwear).
60°/50°
for delicate items (e.g. net curtains), mixed laundry including
synthetic fibres and woollens bearing the label «pure new
wool, machine washable, non-shrink».
40°-30°- Cold
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their “whiteness” in
the wash.
New coloured items may run in the first wash; they should therefore be washed
separately the first time.
Make sure that no metal objects are left in the laundry (e.g. hair clips,
safety pins, pins).
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or
long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the wash cycle 29
Maximum loads
Recommended loads are indicated in the washing programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than one third full.
Washing a maximum load makes the most efficient use of water and energy.
For heavily soiled laundry, reduce the load size.
Washing a maximum load makes the most efficient use of water and energy. For
heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe
napkin
quilt cover
sheet
pillow case
tablecloth
1200 g
100 g
700 g
500 g
200 g
250 g
200 g
100 g
200 g
100 g
600 g
200 g
500 g
100 g
100 g
towelling towel
tea cloth
night dress
ladies’ briefs
man’s work shirt
man’s shirt
man’s pyjamas
blouse
men’s underpants
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore
advisable to treat them prior to washing.
Blood: treat fresh stains with cold water. For dried stains, soak overnight in
water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft
surface and dab the stain with the fingertips and a cotton cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
30 Preparing the wash cycle
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be
careful with rust stains which are not recent since the cellulose structure will
already have been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft
cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated
spirits. Treat any residual marks with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then
with acetic acid; treat any residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub
with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the
correct quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain substances which, in large
quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing temperature and degree of soiling.
All commonly available washer-dryer detergents may be used in this appliance:
• powder detergents for all types of fabric,
• powder detergents for delicate fabrics (60°C max) and woollens,
• liquid detergents, preferably for low temperature wash programmes (60°C
max) for all types of fabric, or special for woollens only.
The detergent and any additives must be placed in the appropriate
compartments of the dispenser drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a programme without
prewash must be selected.
The washer-dryer incorporates a recirculation system which allows an optimal
use of the concentrated detergent.
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the wash cycle 31
Pour liquid detergent into the dispenser drawer compartment marked
before starting the programme.
Any fabric softener or starching additives must be poured into the compartment
marked before starting the wash programme.
just
Follow the product manufacturers’ recommendations on quantities to use and do
not exceed the «MAX» mark in the detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size,
degree of soiling and hardness of the water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load,
• the laundry is lightly soiled,
• large amounts of foam form during washing. For the stain treatment before
the washing cycl, follow the product manufacturers’ instructions on
detergent quantities. If you use any specific product to remove the stains, you
must start the cycle of washing immediately .
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on
hardness of the water in your area can be obtained from the relevant water
supply company, or from your local authority.
Degrees of water hardness
German
°dH
French
°T.H.
Level
Characteristic
1
2
3
4
soft
medium
hard
0-7
8-14
15-21
> 21
0-15
16-25
26-37
> 37
very hard
Note: A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.
The quantity of detergent can then always be adjusted to degree of hardness I (=
soft).
Download from Www.Somanuals.com. All Manuals Search And Download.
32 Preparing the drying cycle
Preparing the drying cycle
As a dryer, the machine works on the condensation principle.
Therefore, the water tap must be open and the drain hose must drain
water into a sink or into the drain pipe, even during the drying cycle.
Attention!
Before starting the drying programme, reduce the loads of washed laundry, in
order to obtain good performances.
Laundry not suitable for drying
• Particularly delicate items such as synthetic curtains, woollen and silk, garments
with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers,
quilts, sleeping bags and duvets must not be machine dried.
• Avoid drying dark clothes with light coloured fluffy items such as towels as these
can attract the fluff.
• Remove the laundry when the appliance has finished drying.
• To avoid a static charge when drying is completed, use either a fabric softener
when you are washing the laundry or a fabric conditioner specifically for tum-
ble dryers.
• Garments padded with foam-rubber or materials similar to foam-rubber must
not be machine dried; they represent a fire hazard.
• Also, fabrics containing residues of setting lotions or hair sprays, nail solvents or
similar solutions must not be machine dried in order to avoid the formation of
harmful vapours..
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the drying cycle 33
Gargment’s labels
For drying, follow the indications given on the manufacturer’s labels:
May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry.
Drying cycle duration
The drying time may vary depending on:
• speed of the final spin
• dryness degree required (extra dry, iron dry, cupboard dry)
• type of laundry
• wheight of the load size
The average drying time for a timed drying are indicated in the «Drying program-
mes» chapter. The experience will help you to dry your laundry in a more suitable
way, according to the different fabrics. Take note of the duration drying time of the
already performed cycles.
Additional drying
If the laundry is till dump at the end of the drying programme, select again a short
drying.
Attention! Do not over dry the laundry in order to avoid creasing of
fabrics or garment’s shrinking .
Download from Www.Somanuals.com. All Manuals Search And Download.
34 Care and cleaning
Care and cleaning
You must DISCONNECT the appliance from the electricity supply, before you can
carry out any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a
water softening powder in the machine. Do this separately from any laundry
washing, and according to the softening powder manufacturer's instructions.
This will help to prevent the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent mould and stagnant smells
forming inside the appliance. Keeping the door open after a wash will also help
to preserve the door seal.
Maintenance wash
With the use of low temperature washes it is possible to get a build up of
residues inside the drum.
We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be a powder with biological
properties.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then
dry thoroughly.
Important! Do not use methylated spirits, solvents or similar products to clean
the cabinet.
Detergent dispenser drawer
The detergent dispenser drawer should be
cleaned regularly.
1. Remove the detergent dispenser drawer
by pulling it firmly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning 35
2. Remove the conditioner insert from the middle compartment.
3. Clean all parts with water.
4. Put the conditioner insert in as far as it
will go, so that it is firmly in place.
5. Clean all parts of the washing ma-
chine, especially the nozzles in the top
of the washing-in chamber, with a
brush.
6. Insert the detergent dispenser drawer in the guide rails and push it in.
Washing drum
Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.
Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum with a cleaning agent for stainless
steel.
2. Run a washing cycle without any washing to clean off any cleaning agent
residues. Programme: COTTONS/LINEN 90° or 95°C, press the button 7, add
approx. 1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.
Drain pump
The pump should be inspected regularly and particularly if
• the machine does not empty and/or spin
• the machine makes an unusual noise during draining due to objects such as
safety pins, coins etc. blocking the pump.
Proceed as follows:
1. Disconnect the appliance.
2. If necessary wait until the water has cooled down.
3. Open the pump door.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 Care and cleaning
4. Place a container close to the pump to
collect any spillage.
5. Release the emergency emptying hose,
place it in the container and remove
its cap.
6. When no more water comes out, unscrew the pump and remove it. Always
keep a rag nearby to dry up spillage of water when removing the pump.
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning 37
7. Remove any objects from the pump
impeller by rotating it.
8. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
9. Screw the pump fully in.
10. Close the pump door.
Warning!
When the appliance is in use and depending on the programme selected there
can be hot water in the pump. Never remove the pump cover during a wash
cycle, always wait until the appliance has finished the cycle, and is empty. When
replacing the cover, ensure it is securely retightened so as to stop leaks and
young children being able to remove it.
Water inlet filter
If you notice that the machine is taking longer to
fill, check that the filter in the water inlet hose is
not blocked.
1. Turn off the water tap.
2. Unscrew the hose from the tap.
3. Clean the filter in the hose with a stiff brush.
4. Screw the hose back onto the tap.
Download from Www.Somanuals.com. All Manuals Search And Download.
38 Care and cleaning
Frost precautions
If the machine is installed in a place where the temperature could drop below
0°C, proceed as follows:
1. Close the water tap and unscrew the water inlet hose from the tap.
2. Place the end of the emergency emptying hose and that of the inlet hose in a
bowl placed on the floor and let water drain out.
3. Screw the water inlet hose back on and reposition the emergency emptying
hose after having put the cap on again.
By doing this, any water remaining in the machine is removed, avoiding ice
forming and consequently damage to the appliance.
When you use the machine again, make sure that the ambient temperature is
above 0°C.
Emergency emptying out
If the water is not discharged, proceed as follows to empty out the machine:
1. pull out the plug from the power socket;
2. close the water tap;
3. if necessary, wait until the water has cooled down;
4. open the pump door;
5. place a bowl on the floor and place the end of the emergency emptying hose
into the bowl. Remove its cap. The water should drain by gravity into the
bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;
6. clean the pump if necessary as previously described;
7. replace the emergency emptying hose in its seat after having plugged it;
8. screw the pump again and close the door.
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if... 39
What to do if...
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.
During machine operation it is possible that the yellow pilot light of button 7 blinks, one of
the following alarm codes appears on the display and at the same some acoustic signals
sound every 20 seconds to indicate that the machine is not working:
• E10 : problem with the water supply
• E2 0 : problem with the water draining
• E40 : door open.
• EF0 : Anti-flooding system has activated
Once the problem has been eliminated, press the button to restart the programme. If
after all checks, the problem persists, contact your local Service Centre.
7
Problem
Possible cause/Solution
The door has not been closed. E40
• Close firmly the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The washer-dryer does not start:
The selector dial is not correctly positioned and the
button 7 has not been pressed.
• Please turn the selector dial and press the button 7
again.
The delay start has been selected.
• If the laundry is to be washed immediately, cancel
the delay start.
The Child safety lock has been activated.
• Deactivated this device.
The water tap is closed. E10
• Open the water tap.
The inlet hose is squashed or kinked. E10
• Check the inlet hose connection.
The machine does not fill:
The filter in the inlet hose is blocked.E10
• Clean the water inlet hose filter.
The door is not properly closed. E40
• Close firmly the door.
Download from Www.Somanuals.com. All Manuals Search And Download.
40 What to do if...
Problem
Possible cause/Solution
The end of the drain hose is too low.
• Refer to relevant paragraph in «water drainage»
section.
The machine fills then empties
immediately:
The drain hose is squashed or kinked. E2 0
• Check the drain hose connection.
The drain filter is clogged. E2 0
• Clean the drain filter.
An option/programme that ends with the water still
in the tub or eliminates all the spinning phases has
been selected.
The machine does not empty
and/or does not spin:
• Disable the option.
• Select the draining or the spinning programme.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Too much detergent or unsuitable detergent (creates
too much foam) has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
• Check the water inlet hose connection.
There is water on the floor:
The drain hose is damaged.
• Change it with a new one.
The cap on the filter has not been replaced or the
filter has not been proparly screwed in after cleaning
action.
• Put the cap back on the filter or screw the filter
fully in.
Too little detergent or unsuitable detergent has been
used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to
washing.
• Use commercial products to treat the stubborn
stains.
Unsatisfactory washing results:
The correct temperature was not selected.
• Check if you have selected the correct temperature.
Excessive laundry load.
• Reduce the laundry load.
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if... 41
Problem
Cause possible/Solution
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the DOOR symbol disappears.
The door will not open:
There is water in the drum.
• Select drain or spin programme to empty out the
water.
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted
• Check the correct levelling of the appliance.
The machine vibrates or is noisy:
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.
Spinning starts late or the machine
does not spin:
• Redistribute the laundry.
The drying time or the dryness degree has not been
selected .
• Select the drying time or the dryness degree
The water tap is not turned on (E10)
• Open the water tap.
The drain filter is clogged (E2 0)
• Clean the drain filter.
The machine is overloaded.
The machine does not dry or does
not dry properly
• Introduce into the drum less laundry.
The selected drying programme, time or dryness
degree was not suitable for the laundry
• Select the suitable drying programme, time or
dryness degree for the laundry.
Download from Www.Somanuals.com. All Manuals Search And Download.
42 What to do if...
Problem
Cause possible/Solution
Machines based on modern technology operate very
economically using very little water without affecting
performance.
No water is visible in the drum:
Anti-flooding system has activated.
• Disconnect the appliance and contact the Service
Force Centre
The display shows the alarm code
:
EF0
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
P
r
M
o
d
o
d
.
N
.
. . . .
o
.
.
.
.
.
. . .
.
.
. .
S
. .
e
. . . .
r
.
N
o
.
.
.
. . . .
. . .
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042 BD
Technical Data
Width
Height
Depth (door included)
60 cm
85 cm
63 cm
Dimensions
Power supply voltage/frequency
Total power absorbed
220-230 V/50 Hz
2050 W
Electrical connection
Minimum fuse protection
10 A
Minimum
Maximum
0,05 MPa
0,80 MPa
Water supply pressure
Maximum Load
Cottons
7 kg
Cotton
3.5 Kg
5.0 Kg
2.0 kg
Maximum Dry Load
Spin Speed
Cotton Big Capacity
Synthetics
Maximum
1600 rpm
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption value 43
Consumption value
Water consumption Energy consumption Programme duration
Programme
(lltres)
(KWh)
(Minutes)
White Cottons 95°
Cottons 60°
62
2.1
58
52
58
54
63
62
1.35
1.19
0.75
0.9
(*)Cotton ECOMONY 60°
Cottons 40°
Synthetics 60°
Delicates 40°
0.55
0.25
Wool ( Handwash) 30°
The consumption data shown on this chart is to be considered purely indicative, as
it may vary depending on the quantity and type of laundry, on the inlet water
temperature and on the ambient temperature.
(*) «Economy 60°C» with a load of 7 kg is the reference programme for the data
entered in the energy label, in compliance with EEC 92/75 standards.
Download from Www.Somanuals.com. All Manuals Search And Download.
44 Installation
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
1. After removing all the packaging, carefully lay
machine on it’s back to remove the
polystyrene base from the bottom.
HEC0008
2. Remove the power supply cable and the
draining hose from the hose holders on the rear of the
appliance.
HEC0001
3. With a suitable spanner unscrew and remove the
central rear bolt A.
A
HEC00022
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation 45
4. Unscrew and remove the two large rear bolts B
and the six smaller bolts C.
C
B
C
D
C
B
HEC0003
5. Remove the bracket D and tighten up the six
smaller bolts C. Slide out the relevant plastic
spacer E.
E
HEC0023 C
6. Open the porthole, take out the inlet hose from the
drum and remove the polystyrene block fitted on the
door seal.
HEC0010
7. Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.
8. Connect the water inlet hose as described under the
paragraph «Water inlet».
All the different plug caps are supplied with the appliance in
the plastic bag containing the instruction booklet.
HEC0005
Download from Www.Somanuals.com. All Manuals Search And Download.
46 Installation
Positioning and levelling
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets,
rugs etc.
Before placing it on small tiles, apply a rubber coating.
Never try to correct any unevenness in the floor by putting pieces of wood,
cardboard or similar materials under the machine.
If it is impossible to avoid positioning the machine next to a gas cooker or coal-
burning stove, an insulating panel covered with aluminium foil on the side facing
the cooker or stove, must be inserted between the two appliances.
The machine must not be installed in rooms where the temperature can drop
below 0.
The water inlet hose and the drain hose must not be kinked.
Please ensure that when the appliance is installed, it is easily accessible for the
engineer in the event of a breakdown.
Carefully level by screwing the adjustable feet in or out. Never place cardboard,
wood or similar materials under the machine to compensate for any unevenness
in the floor.
Water inlet
An inlet hose is supplied and can be found inside the machine drum.
Do not use the hose from your previous machine to connect to the
water supply.
This appliance must be connected to a cold water supply.
1. Open the porthole and extract the inlet hose.
2. Connect the hose with the angled connection to the machine.
Do not place the inlet hose downwards. Angle the hose to the left or
right depending on the position of your water tap.
3. Set the hose correctly by loosening the ring nut.
After positioning the inlet hose, be sure to tighten the ring nut again to prevent
leaks.
4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with
the appliance.
The inlet hose must not be lengthened. If it is too short and you do not wish to
move the tap, you will have to purchase a new, longer hose specially designed
for this type of use.
Installation should comply with local water authority and building regulations
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation 47
requirements. A minimum water pressure of 0.05
MPa is required for safe operation of the appliance.
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system. There
should be a minimum distance of between the appli-
ance’s inlet and the bottom of the water storage tank.
Water-stop device
The inlet hose is provided with a water stop device,
which protects against damage caused by water leaks in
the hose which could develop due to natural ageing of
the hose. This fault is shown by a red sector in the
A
A
window “ ”. Should this occur, turn the water tap off
and refer to your Service Centre to replace the hose.
352
Water drainage
This appliance is designed to be permanently plumbed into your home's drainage
system using one of the following methods.
1. Into a drainage standpipe.
Firstly form a hook in the end of the drain hose using
the “U” piece” supplied.
“U” piece
supplied
Place the drain hose into your standpipe, which
should have an internal diameter of approximately
38mm thus ensuring there is an air break between
the drain hose and standpipe.
38 mm (1.5”)
standpipe
diameter
Download from Www.Somanuals.com. All Manuals Search And Download.
48 Installation
When discharging into a standpipe
ensure that the top of the standpipe is
no more than 90 cm (35.4'') and no less
than 60 cm (23.6'') above floor level.
3 pin
The drain hose may be extended to a
maximum of 4 metres. An additional
drain hose and joining piece is available
from your local Service Force Centre.
The joining piece must have an internal
diameter of 18 mm.
If your drain hose looks like this (see the relevant
pcture) you do not require the “U” piece”. Just push
the hose firmly into the standpipe.
2. Onto a sink outlet spigot.
If the outlet spigot has not been used before, remove any blanking plug that may
be in place.
Push the drain hose onto the spigot and secure with a
clip if required, ensure a loop is formed in the drain
hose (see diagram) to prevent waste from the sink
entering the washing machine.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece is
available from your local Service Force Centre. The
joining piece must have an internal diameter of 18
mm.
If you intend the drain hose from the machine to
empty into a sink, make sure that the sink is empty and
the plug hole is not blocked. Use the plastic “U -Piece”
supplied.
Loop
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation 49
In the interest of the environment
Washing machines and dishwashers
should be connected to the FOUL
drainage system, the water will then
be taken to a sewage works for
treatment before being discharged
safely into a river.
It is essential that these appliances
are not connected to the surface
water drainage system as this water
is discharged directly into a river or
stream and may cause pollution.
SHOWER
SINK TOILET
BIDET
BATH
WASHING
MACHINE
DISHWASHER
RAINWATER
'RUN-OFF'
If you require any further advice
please contact your local water
authority.
FOUL DRAIN
FOUL SEWERS
SURFACE WATER
DRAINS &SEWERS
SEWAGE
TREATMENT
WORKS
TREATED
DISCHARGE
UNTREATED
DISCHARGE
RIVER
RIVER
Electrical connection
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer does not accept any responsibility for damage or
injury through failure to comply with the above safety precaution.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it
must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case
it should be plugged into a 13 Amp socket in another part of your home.
Important
The wires in the mains lead are coloured in accordance with the following code:
GREEN &YELLOW
13AMP FUSE
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
BROWN
CORD CLAMP
BLUE
Download from Www.Somanuals.com. All Manuals Search And Download.
50 Installation
If you fit your own plug, the colours of the wires in the mains lead of your appli-
ance may not correspond with the markings identifying the terminals in your plug,
proceed as follows:
Connect the green and yellow (earth) wire to the terminal in the plug which is
marked with the letter «E» or the earth symbol
or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with
the letter «N» or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the
letter «L» or coloured red.
The plug moulded on to the lead incorporates a fuse. For replacement, use a 13
A
Amp BS1363/ fuse. Only ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indi-
cated by the coloured insert at the base of the plug.
A replacement cover/carrier must be obtained from your local AEG/ELECTROLUX
Service Centre.
The power supply cable must be easily accessible after installing the
machine.
Should the appliance power supply cable need to be replaced, this MUST
be carried out by a Service Centre.
Permanent connection
In the case of a permanent connection it is necessary that you install a double pole
switch between the appliance and the electricity supply (mains), with a minimum
gap of 3 mm between the switch contacts and of a type suitable for the required
load in compliance with the current electrical regulations.
The switch must not break the yellow and green earth cable at any point.
This operation must be performed by a qualified electrician.
Download from Www.Somanuals.com. All Manuals Search And Download.
Environment concerns 51
Enviroment concerns
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
are recyclable.
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in
appropriate collection containers.
Old machine
Use authorised disposal sites for your old appliance. Help to keep your country tidy!
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the shop
where you purchased the product.
Ecological hints
To save water, energy and to help protect the environment, we recommend that
you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save
detergent, water and time (the environment is protected too!).
• The machine works more economically if it is fully loaded.
• With adequate pre-treatment, stains and limited soiling can be removed; the
laundry can then be washed at a lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling
and the quantity of laundry being washed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|