|
DISHWASHER
USER MANUAL
FAVORIT 88009
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate.
Model
PNC
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
4
SAFETY INFORMATION
Before the installation and use of the
appliance, carefully read the supplied
instructions. The manufacturer is not re-
sponsible if an incorrect installation and
use causes injuries and damages. Al-
ways keep the instructions with the ap-
pliance for future reference.
Water connection
• Make sure not to cause damage to
the water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a
long time, let the water flow until it is
clean.
• The first time you use the appliance,
make sure that there is no leakage.
•
CHILDREN AND VULNERABLE
PEOPLE SAFETY
WARNING!
Risk of suffocation, injury or per-
manent disability.
• Do not let persons, children inclu-
ded, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervi-
sion or instruction for the operation
of the appliance by a person who is
responsible for their safety. Do not
let children play with the appliance.
WARNING!
Dangerous voltage.
The water inlet hose has a safety
valve and a sheath with an inner
mains cable.
• If the water inlet hose is damaged,
immediately disconnect the mains
plug from the mains socket. Contact
Service to replace the water inlet
hose.
• Keep all packaging away from chil-
dren.
• Keep all detergents away from chil-
dren.
• Keep children and pets away from
the appliance door when it is open.
INSTALLATION
WARNING!
Electrical connection
This appliance must be installed
by a qualified or competent per-
son.
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Remove all the packaging.
• Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply. If not, contact an
electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains ca-
• Do not install or use a damaged ap-
pliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction sup-
plied with the appliance.
• Make sure that the appliance is in-
stalled below and adjacent to safe
structures.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
5
ble. Contact Service or an electrician
to change a damaged mains cable.
• Do not drink and play with the water
in the appliance.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access
to the mains plug after the installa-
tion.
• Do not pull the mains cable to dis-
connect the appliance. Always pull
the mains plug.
• Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent
on the dishes.
WARNING!
Risk of electrical shock, fire or
burns.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
USE
WARNING!
Risk of injury.
• The appliance can release hot steam
if you open the door while a pro-
gramme operates.
• Use this appliance in a household en-
vironment.
• Do not change the specification of
this appliance.
• Put knives and cutlery with sharp
points in the cutlery basket with the
points down or in a horizontal posi-
tion.
DISPOSAL
WARNING!
Risk of injury or suffocation.
• Do not keep the appliance door
open without supervision to prevent
to fall on it.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and dispose
of it.
• Do not sit or stand on the open door.
• Dishwasher detergents are danger-
ous. Obey the safety instructions on
the detergent packaging.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
PRODUCT DESCRIPTION
1
3
2
12
11
9
8
7
6
5
4
10
Top spray arm
Water hardness dial
Rinse aid dispenser
Detergent dispenser
Cutlery basket
1
2
3
4
5
6
7
8
9
Upper spray arm
Lower spray arm
Filters
10
11
12
Rating plate
Salt container
Lower basket
Upper basket
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
7
CONTROL PANEL
1
2
4
3
A
B
C
5
6
9
8
7
On/off button
Delay touchpad
Start touchpad
Indicators
1
2
3
4
5
6
7
8
9
Programme guide
Program touchpad
Programme indicators
Display
Option touchpad
Indicators
Description
Multitab indicator.
ÖKO PLUS indicator.
ExtraHygiene indicator.
Washing phase indicator.
Rinsing phase indicator.
Drying phase indicator.
End indicator.
Rinse aid indicator. This indicator is off while the
programme operates.
Salt indicator. This indicator is off while the pro-
gramme operates.
Delay indicator.
Door indicator. It comes on when the door is not
closed.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PROGRAMMES
Programme
Type of soil
Type of load
Programme phases
Options
1)
All
Prewash
ExtraHygiene
ÖKO PLUS
Crockery, cutlery,
pots and pans
Wash 45 °C or 70 °C
Rinses
Dry
2)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
ÖKO PLUS
Dry
3)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
Dry
4)
Fresh soil
Crockery and cut-
lery
Wash 60 °C
Rinse
ExtraHygiene
5)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
ExtraHygiene
ÖKO PLUS
Dry
Light soil
Crockery and cut-
lery
Wash 50 °C
Rinses
ExtraHygiene
ÖKO PLUS
Mixed soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
6)
Dry
Normal or light soil Wash 45 °C
ÖKO PLUS
Delicate crockery
and glassware
Rinses
Dry
1)
The appliance senses the type of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
2)
3)
This programme includes the ExtraHygiene option.
This is the most silent washing programme. The pump works at a very low speed to
decrease the level of noise. Because of the low speed, the programme duration is long.
4)
5)
With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
This is the standard programme for test institutes. With this programme you have the most
efficient use of water and energy consumption for crockery and cutlery with normal soil.
Refer to the supplied leaflet for test information.
6)
With this programme you can wash a load with mixed soil. Very heavy soil in the lower
basket and normal soil in the upper basket. The water pressure and the water temperature
in the lower basket are higher than in the upper basket.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
9
Consumption values
1)
Energy (kWh)
0.9 - 1.7
1.4 - 1.6
1.1 - 1.2
0.8
Water (l)
8 - 15
13 - 14
9 - 11
9
Programme
0.9 - 1.0
1.0 - 1.1
1.3 - 1.5
9 - 11
10 - 11
14 - 15
0.8 - 0.9
11 - 12
1)
The display shows the programme duration.
The water pressure and temperature, the variations of the mains supply, the options and
the quantity of dishes can change the programme duration and the consumption values.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
OPTIONS
MULTITAB FUNCTION
Press
Option
touch-
pad
Activate this function only when you
use the combi detergent tablets.
This function deactivates the flow of
rinse aid and salt. The related indicators
are off.
1 time
on
off
on
on
off
off
off
off
off
off
on
on
off
2 times off
3 times on
4 times off
5 times on
6 times off
The programme duration can increase.
ÖKO PLUS
This function decreases the tempera-
ture in the drying phase. The energy
consumption decreases by 25%.
The dishes can be wet at the end of the
programme. We recommend that you
keep the door ajar and let the dishes
dry.
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Deactivate the multitab function.
EXTRAHYGIENE
2. Adjust the water softener to the
highest level.
This function gives better results for the
hygiene. During the rinsing phase, the
temperature stays at 70 °C for 10 to 14
minutes.
3. Make sure that the salt container
and the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent
and without dishes.
ACTIVATING THE OPTIONS
5. Adjust the water softener to the wa-
• Activate or deactivate the options
before the start of a programme. You
cannot activate or deactivate the op-
tions while a programme operates.
ter hardness in your area.
6. Adjust the released quantity of rinse
aid.
• It is not possible to activate the Ex-
traHygiene function and the ÖKO
PLUS function together.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
11
BEFORE FIRST USE
1. Make sure that the set level of the
ADJUSTING THE WATER
SOFTENER
water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your lo-
cal water authority to know the wa-
ter hardness in your area.
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these miner-
als.
The dishwasher salt keeps the water
softener clean and in good conditions.
Refer to the table to adjust the water
softener to the right level. It makes sure
that the water softener uses the correct
quantity of dishwasher salt and water.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.
If you use the combi detergent
tablets, activate the multitab
function. These tablets contain
detergent, rinse aid and other
added agents. Be sure that
these tablets are applicable to
the water hardness in your area.
Refer to the instructions on the
packaging of the products.
You must adjust the water soft-
ener manually and electronical-
ly.
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
1)
2
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
91 - 125
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
9.1 - 12.5
7.6 - 9.0
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
10
9
1)
2
1)
2
8
1)
2
7
1)
2
6
1)
2
1)
5
15 - 18
11 - 14
4 - 10
< 4
26 - 32
19 - 25
7 - 18
< 7
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
< 0.7
18 - 22
13 - 17
5 - 12
< 5
1
1
1
4
3
2
2)
1
2)
1
1)
2)
Factory position.
Do not use salt at this level.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Manual adjustment
Turn the water hardness dial to the po-
sition 1 or 2.
• The indicators (B) and (C) go off.
• The indicator (A) continues to
flash.
• The display shows the setting of
the water softener. Example:
= level 5.
Electronic adjustment
1. Press the on/off button to activate
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold Delay and Start at
the same time until the indicators
(A), (B) and (C) flash.
5. Press Program again and again to
change the setting.
6. Deactivate the appliance to confirm.
4. Press Program.
FILLING THE SALT CONTAINER
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out
from the salt container when
you fill it. Risk of corrosion. To
prevent it, after you fill the salt
container, start a programme.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt con-
tainer (only for the first time).
3. Fill the salt container with dish-
washer salt.
4. Remove the salt around the open-
ing of the salt container.
5. Turn the cap clockwise to close the
salt container.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
13
FILLING THE RINSE AID DISPENSER
CAUTION!
A
B
Only use rinse aid for dishwash-
ers. Other products can cause
damage to the appliance.
A
The rinse aid, during the last
rinsing phase, helps to dry the
dishes without streaks and
stains.
+
-
C
D
1. Press the release button (D) to
open the lid (C).
2. Fill the rinse aid dispenser (A), no
more than the mark 'max'.
3. Remove the spilled rinse aid with
an absorbent cloth to prevent too
much foam.
4. Close the lid. Make sure that the
release button locks into position.
You can turn the selector of the
released quantity (B) between
position 1 (lowest quantity) and
position 4 (highest quantity).
Download from Www.Somanuals.com. All Manuals Search And Download.
14
DAILY USE
1. Open the water tap.
• Do not put in the appliance items
that can absorb water (sponges,
household cloths).
• Remove remaining food from the
items.
• Make soft the remaining burned food
on the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
2. Press the on/off button to activate
the appliance. Make sure that the
appliance is in setting mode. Refer
to ’SETTING AND STARTING A
PROGRAMME’.
• If the salt indicator is on, fill the
salt container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
3. Load the baskets.
4. Add the detergent.
• Make sure that glasses do not touch
other glasses.
• Put small items in the cutlery basket.
5. Set and start the correct pro-
gramme for the type of load and
soil.
• Put light items in the upper basket.
Make sure that the items do not
move.
• Make sure that the spray arms can
move freely before you start a pro-
gramme.
LOADING THE BASKETS
Refer to the supplied leaflet with
examples of the load of the bas-
kets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items
made of wood, horn, aluminium,
pewter and copper.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
15
USING THE DETERGENT
CAUTION!
Use only detergents for dish-
washers.
A
B
1. Press the release button (B) to
open the lid (C).
30
20
2. Put the detergent in the compart-
ment (A) .
3. If the programme has a prewash
C
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.
4. If you use detergent tablets, put
the tablet in the compartment (A).
5. Close the lid. Make sure that the
release button locks into position.
Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.
Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.
1. Open the water tap.
SETTING AND STARTING A
PROGRAMME
2. Press the on/off button to activate
the appliance.
3. Close the appliance door.
Setting mode
4. Make sure that the appliance is in
The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come
on.
• The display shows two horizontal sta-
tus bars.
If the control panel shows other condi-
tions, press and hold Delay and Start
at the same time until the appliance is
in setting mode.
setting mode.
5. Press Program again and again un-
til the indicator of the programme
that you want to set comes on.
• The programme duration flashes
in the display.
• The phase indicators of the set
programme come on.
6. If you want, you can set the options.
7. Press Start. The programme starts.
• Only the indicator of the phase in
operation stays on.
Starting a programme without
delay start
Download from Www.Somanuals.com. All Manuals Search And Download.
16
• The display shows the pro-
gramme duration that decreases
with steps of 1 minute.
Press and hold Delay and Start at the
same time until:
• All the programme indicators come
on.
Starting a programme with
delay start
• The display shows two horizontal sta-
tus bars.
Make sure that there is deter-
gent in the detergent dispenser
before you start a new pro-
gramme.
1. Set the programme and the op-
tions.
2. Press Delay again and again until
the display shows the delay time
you want to set (from 1 to 24 hours).
At the end of the programme
• The delay time flashes in the dis-
play.
• The delay indicator is on.
When the programme is completed,
the end indicator is on and the display
shows 0.
3. Press Start. The countdown starts.
1. Open the appliance door.
• The display shows the countdown
of the delay start that decreases
with steps of 1 hour.
2. Press the on/off button to deacti-
vate the appliance.
• The phase indicators of the set
programme go off.
• When the countdown is completed,
the programme starts.
– The indicator of the phase in oper-
ation comes on.
3. Close the water tap.
If you do not press the on/off
button, the Auto Off device au-
tomatically deactivates the ap-
pliance after some minutes. This
helps to decrease the energy
consumption.
Opening the door while the
appliance operates
• For better drying results, keep the
appliance door ajar for some mi-
nutes.
• Let the dishes become cold before
you remove them from the appli-
ance. Hot dishes can be easily dam-
aged.
If you open the door, the appliance
stops. When you close the door, the
appliance continues from the point of
interruption.
Cancelling the delay start while
the countdown operates
• First remove the items from the lower
basket, then from the upper basket.
There can be water on the sides
and on the door of the appli-
ance. Stainless steel becomes
cool more quickly than the
dishes.
Press Delay again and again until:
• The display shows the programme
duration.
• The phase indicators come on.
• The programme starts.
Cancelling the programme
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
17
CARE AND CLEANING
WARNING!
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
Before maintenance, deactivate the ap-
pliance and disconnect the mains plug
from the mains socket.
CLEANING THE FILTERS
1. Turn the filter (A) counter-
C
clockwise and remove it.
2. To disassemble the filter (A),
pull apart (A1) and (A2).
C
3. Remove the filter (B).
4. Wash the filters with water.
A
5. Put the filter (B) to its initial
position. Make sure that it
assembles correctly under
the two guides (C).
B
6. Assemble the filter (A) and
put it into position in filter
(B). Turn it clockwise until it
locks.
A1
A2
An incorrect position of
the filters can cause bad
washing results and dam-
age to the appliance.
Only use neutral detergents. Do not
use abrasive products, abrasive clean-
ing pads or solvents.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clog-
ged, remove remaining parts of soil
with a thin pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft
cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
TROUBLESHOOTING
The appliance does not start or it stops
•
•
- The appliance does not drain
the water.
during operation.
First try to find a solution to the prob-
lem (refer to the table). If not, contact
Service.
With some problems, the display
shows an alarm code:
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you make the checks.
•
- The appliance does not fill with
water.
Problem
Possible cause
Possible solution
The programme
does not start.
The mains plug is not con-
nected in the mains socket.
Connect the mains plug.
The appliance door is open. Close the appliance door.
You did not press Start.
Press Start.
The fuse in the fuse box is
damaged.
Replace the fuse.
The delay start is set.
Cancel the delay start or
wait for the end of the
countdown.
The appliance does The water tap is closed.
not fill with water.
Open the water tap.
The water pressure is too
low.
Contact your local water au-
thority.
The water tap is clogged or Clean the water tap.
there is limescale on it.
The filter in the water inlet
hose is clogged.
Clean the filter.
The water inlet hose has a
kink or a bend.
Make sure that the position
of the hose is correct.
The anti-flood device is on. Close the water tap and
There are water leakages in contact Service.
the appliance.
The appliance does The sink spigot is clogged.
not drain the water.
Clean the sink spigot.
The water drain hose has a
kink or a bend.
Make sure that the position
of the hose is correct.
After the checks are completed, acti-
vate the appliance. The programme
continues from the point of interrup-
tion.
If the problem occurs again, contact
Service.
If the display shows other alarm codes,
contact Service.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
19
THE WASHING RESULTS AND DRYING RESULTS ARE NOT
SATISFACTORY
Problem
Possible cause
Possible solution
Clean the filters.
The dishes are not
clean.
The filters are clogged.
The filters are not correctly Make sure that the filters are
assembled and installed.
correctly assembled and in-
stalled.
The spray arms are clog-
ged.
Remove remaining soil with a
thin pointed object.
The programme was not
applicable for the type of
load and soil.
Make sure that the pro-
gramme is applicable for the
type of load and soil.
Incorrect position of the
Make sure that the position
items in the baskets. Water of the items in the baskets is
could not wash all items.
correct and that the water
can easily wash all items.
The spray arms could not
turn freely.
Make sure that the position
of the items in the baskets is
correct and does not cause
the blockage of the spray
arms.
The quantity of detergent
was not sufficient.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
There was no detergent in
the detergent dispenser.
Make sure that you add de-
tergent in the dispenser be-
fore you start a programme.
Limescale particles
on the dishes.
The salt container is empty. Make sure that there is dish-
washer salt in the salt con-
tainer.
The set level of the water
softener is incorrect.
Make sure that the set level
of the water softener agrees
with the water hardness in
your area.
The cap of the salt contain- Tighten the cap.
er is loose.
Whitish streaks and The released quantity of
Decrease the released quan-
tity of rinse aid .
stains or bluish lay-
ers on glasses and
dishes.
rinse aid is too much.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Problem
Possible cause
Possible solution
The quantity of detergent
was too much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Dry water drop
stains on glasses
and dishes.
The released quantity of
Increase the released quanti-
rinse aid was not sufficient . ty of rinse aid.
The quality of the detergent Try a different brand of de-
can be the cause.
tergent.
The dishes are wet. • The programme had no
drying phase.
For better drying results,
keep the door ajar for some
minutes.
• The programme had a
low temperature drying
phase.
The dishes are wet
and matt.
The rinse aid dispenser is
empty.
Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause.
Try a different brand of rinse
aid.
The quality of the combi
detergent tablets can be
the cause.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the com-
bi detergent tablets.
• The indicator (B) continues to
Activating the rinse aid
dispenser with the multitab
function activated
flash.
• The display shows the setting of
the rinse aid dispenser.
1. Press the on/off button to activate
Off
On
the appliance.
2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold Delay and Start at
the same time until the indicators
(A), (B) and (C) flash.
5. Press Option to change the setting.
6. Deactivate the appliance to confirm.
7. Adjust the released quantity of rinse
aid.
4. Press Option .
8. Fill the rinse aid dispenser.
• The indicators (A) and (C) go off.
TECHNICAL INFORMATION
Dimensions
Width / Height / Depth (mm)
Refer to the rating plate.
596 / 818 - 878 / 580
Electrical connection
Water supply pressure
Min. / max. (bar / MPa)
Cold water or hot water
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
1)
2)
Water supply
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
21
Capacity
Place settings
Connect the water inlet hose to a water tap with a 3/4'' thread.
12
1)
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
23
Download from Www.Somanuals.com. All Manuals Search And Download.
117928790-A-212011
Download from Www.Somanuals.com. All Manuals Search And Download.
|