AdvanceCAM
IntraOral Camera
Operation And
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Docking Station AIC815
Full / Quad Button: Push button to capture image(s) in full
screen or 4 images (quad).
Choice Button: Press the choice button to highlight image 1 2
3 or 4 when in quad mode. The number will turn green. This
function only works in quad mode.
Zoom Button: Use choice to select then press zoom while the
number is highlighted green, this will zoom in on selected
image. Press again to return to normal size.
Freeze Button: Press to capture image. Press to return to live
image.
Download from Www.Somanuals.com. All Manuals Search And Download.
Advance Cam
Press “Freeze button” to freeze image. Press “Freeze
button” again to copy image into memory. There is also an
additional button on the wand that will allow you to change
from “full” to “quad”. Press this button once and it will put
you in “quad” mode. Press a second time and the camera
will go back to a “full” screen mode. While in “quad” mode
you must depress the capture button only four times to freeze
all images if you press the button a fifth time the image will
be copied into m
Freeze Button: Press
button to freeze image on
monitor.
Full / Quad Button: Choose
to capture image in full
screen or capture 4 images
Transmi
(quad).
The transmitter has a power indicator that will
show low medium and high power. The
transmitter also has a channel selector that will
select from channels 1 to 4. The power switch is
located on the right side of the unit if looking from
the front as shown
Power Indicator
Wireless Channel
display
Shows green for
high power and red
for low power.
Plug this end into
the camera.
DC Power input
used to charge the
battery
Power Switch On
and Off.
Channel Selector
Download from Www.Somanuals.com. All Manuals Search And Download.
AdvanceCAM
Intraoral Camera
Installation Instructions
AIC 850
Turn power to
transmitter on and off.
Light will emit from
end of camera when
power is on.
Connect Camera wand
cable to wireless
transmitter if you
desire wireless
operation.
Turn power to
Connect camera
transmitter on and off.
Light will emit from
end of camera when
power is on.
transmitter to the
back of the
camera.
Connect camera
wand cable to
docking station if
you desire corded
use.
AIC815
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Prior to using the TPC-WIC 850, AIC900 charge the
Wireless Video Module TX until the power supplies LED
turns back to green. It will be red while the unit is charging.
After the charging period is over, it is recommended that the
power charger be removed from the transmitter.
2. Disconnect power supply from Wireless Video Module
TX “DC In” port.
3. Connect EZ Cam cord to Wireless Video Module TX
“Cam” port.
AIC850
AIC888
Download from Www.Somanuals.com. All Manuals Search And Download.
AIC810
4. Plug adv20 “switching power adapter” into Docking
Station ADV-20 /AIC815 “DC 5VIN” port. Plug power
supply into wall outlet.
AIC810
5. Plug RCA jack or S-Video into Docking Station ADV-
20 “AV Out” or “YC Out” port. Connect other end of video
cable into Video Input port on monitoring device (pc or TV).
Note you only need to use one video output S-video Or RCA.
AIC815
6. Plug RCA jack or S-Video into Docking Station AIC 815
“AV Out” or “S0video out” port. Connect other end of video
cable into Video Input port on monitoring device. If you wish
to use a USB 2.0 Connection to a computer use the supplied
cable. Make sure you have the driver disc. Refer to the manual
on the driver disc for help installing the drivers and software
onto a PC .
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes: Cameras that start with PA or NT, you will need to
press the freeze button to activate the camera’s LED’s.
This will turn the camera on. Then you will be able to see
an image from the camera.
Docking Station Settings:
AIC800,805,810,815
•
•
Switches 1-4 are to select the docking station’s
channels. Only one can be set to the on position.
They must correspond to the transmitter’s setting.
The P and N are to select which system is being
used. P is for PAL and N is for NTSC. This must
match the camera SN. Look on the back of the
camera to see if you SN# starts with a P or an N.
Then determine which setting will work for your
configuration.
•
The W-L and W are to set the docking station to
wireless or corded mode. W-L is for wireless and
W is for corded.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
The remote to my camera does not work.
1. Point the remote towards the lens of the camera,
press any button and hold on the remote. You should
see light flickering on the monitor. You must use the
camera to see this because the human eye cannot
detect this light.
2. If there is no light try changing the battery in the
remote.
3. If problem persists call your local dealer.
There is no light coming from the end of my camera.
1. Check to see if the transmitter is fully charged.
2. Check the connection in the end of the camera
wand cord.
3. Hook the camera up directly to the receiver.
4. If none of the three steps work, the camera may
have internal damage. Contact your local dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
|