ADIC Tool Storage Version 27 User Manual

Command  
Options  
Description  
Command  
Options  
Description  
StorNext®  
[ -m minstoretime ]  
Minimum time (in minutes) that  
a file must reside unmodified  
on disk before being  
considered a candidate for  
storage on media.  
[ class ]  
One or more policy classes to  
be listed.  
Storage Manager  
Version 2.7  
[ -l ]  
Long report - processing  
parameters, directory paths,  
and the disk affinity list for the  
policy class.  
[ -c mintrunctime ]  
Minimum time (in days) that a  
file must reside unaccessed on  
disk before being considered a  
candidate for truncation.  
Syntax conventions:  
italics = replace with a variable  
[ ] = optional component  
fsmodclass  
Modifies the parameters of the  
policy class.  
[ -a affinity ]  
Lists disk affinities that the files  
in the policy class will traverse  
in their lifecycle.  
class  
The policy class.  
Policy Class Management  
[ -d defaultcopies ]  
Total number of copies to store  
(including the primary) for  
each file in the policy class.  
[ -i minreloctime ]  
Minimum time (in days) that a  
file must reside unaccessed on  
disk before being considered a  
candidate for relocation.  
Command  
Options  
Description  
fsaddclass  
Creates and defines a new  
policy class.  
[ -f i | p ]  
File retention policy (-f) for the  
policy class. Files can be:  
[ -v drivepool ]  
Media Manager drive pool  
used to store or retrieve data  
for the policy class.  
WARNING: The file system  
must be mounted and active  
before running this command  
or it will fail.  
• i - Truncated immediately  
• p - Truncated at policy  
application time  
[ -f i | p ]  
File retention policy (-f) for the  
policy class. Files can be:  
[ -h hardlimit ]  
Maximum number of media  
allowed in the policy class.  
class  
The policy class (maximum of  
16 alphanumeric characters).  
• i - Truncated immediately  
• p - Truncated at policy  
application time  
[ -l securitycode ]  
Security code for the policy  
class (up to 4 characters in  
length).  
[ -h hardlimit ]  
[ -n notifyID ]  
Maximum number of media  
allowed in the policy class.  
[ -r c | s ]  
Media classification cleanup  
action. When all files are  
E-mail address of the user to  
notify when the policy class’s  
softlimit and hardlimit are  
reached.  
[ -m minstoretime ]  
Minimum time (in minutes) that  
a file must reside unmodified  
on disk before being  
deleted from a medium, the  
medium can revert (-r) back to:  
considered a candidate for  
storage on media.  
• c - Policy class blank pool  
• s - System blank pool  
[ -t mediatype ]  
Defines the media type to use  
for the policy class.  
[ -c mintrunctime ]  
[ -i minreloctime ]  
[ -n notifyID ]  
Minimum time (in days) that a  
file must reside unaccessed on  
disk before being considered a  
candidate for truncation.  
fsaddrelation  
Adds a directory-to-policy  
class association.  
[ -l securitycode ]  
Security code for the policy  
class (up to 4 characters in  
length).  
Minimum time (in days) that a  
file must reside unaccessed on  
disk before being considered a  
candidate for relocation.  
[ -o acctnum ]  
Account number for the policy  
class (up to 5 characters in  
length).  
directory  
Path name of the directory to  
associate with the policy class.  
WARNING: The command  
fails if the directory has an  
affinity associated with it. Use  
the cvaffinity command to  
remove its affinity.  
E-mail address of the user to  
notify when the policy class’s  
softlimit and hardlimit are  
reached.  
[ -x maxcopies ]  
[ -d defaultcopies ]  
Maximum number of copies  
(including the primary) allowed  
for each file in the policy class.  
Total number of stored copies  
(including the primary) for  
each file in the policy class.  
This value cannot exceed the  
maxcopies setting.  
-c class  
Policy class to associate with  
the directory.  
[ -o acctnum ]  
Account number for the policy  
class (up to 5 characters in  
length).  
NOTE: After the command  
completes running  
successfully, if the class has  
any affinities, the directory has  
its affinity set to the first affinity  
in the class affinity list,  
[ -r c | s ]  
Media classification cleanup  
action. When all files are  
deleted from a medium, the  
medium can revert (-r) back to:  
[ -k maxversions ]  
Maximum number of inactive  
versions to keep for a file. The  
minimum is 1 and the  
maximum is 25.  
• c - Policy class blank pool  
• s - System blank pool  
Default: 10  
fsclassinfo  
Reports policy class  
processing parameters,  
directory paths, and affinity  
lists.  
Page 1  
Page 2  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
File System Recovery  
Command  
Options  
Description  
Command  
Options  
Description  
Command  
Options  
Description  
fsrmdiskcopy  
Removes a file copy from  
disk after the file is stored to  
media.  
snrestore  
Restores elements of a  
StorNext Storage Manager  
file system.  
fsrecover  
Reports or recovers files  
that were removed from  
disk.  
filename  
Full path and name of the  
file copy to remove from  
disk.  
[ -p ]  
Specifies a temporary  
storage directory for  
restored files.  
filename  
Name of the file to report  
on. The name can be a file  
name, a partial path name,  
or a complete path name.  
fsstore  
Expedites storage of data  
to media, instead of  
allowing data migration by  
SNMS software.  
[ -h ]  
[ -e ]  
Displays usage.  
dirname  
Directory containing one or  
more files to recover. The  
name can be a directory  
name, partial path, or full  
path.  
Extracts files to the  
temporary storage  
directory.  
filename  
Name of file on disk to store  
to media.  
[ -r ]  
Uses files from this  
directory to restore. No  
files are restored from  
media.  
[ -c copies ]  
[ -f i | p ]  
Number of file copies to  
store, including the primary.  
restore_directory_path  
[ RM_time::  
]filepathname  
Full path of the file to  
recover. Optionally, you  
can have a timestamp of  
the form  
YYYY:MM:DD:hh:mm:ss::/  
stornext/smfs2/rel1/sub1/  
file.a.  
File retention policy (-f) for  
the file. Files can be:  
[ -c | cl component ]  
Specifies the software files  
restored. You can specify:  
• i - Truncated immediately  
• p - Truncated at policy  
application time  
• -c - Restore all software  
configuration  
dirpathname  
Full path of the directory  
containing file(s) to  
recover.  
information.  
• -cl component - Restore  
the specified software  
component. Use the -h  
option to find a list of  
available components.  
[ -t mediatype ]  
[ -v drivepool ]  
Defines the media type to  
use for storage.  
-u  
-d  
Indicates that recovery  
processing is requested.  
Specifies the Media  
Manager drive pool group  
used to store the file.  
Indicates that directory  
recovery processing is  
requested.  
[ -d | dj ]  
Specifies the database  
restore values. You can  
specify:  
[ -z minsize ]  
Specifies the minimum file  
size (in bytes) to store.  
[ -p ]  
Specifies that the user  
report display entries for  
which the user has  
• -d - Restore database  
and journal files.  
fsversion  
Specifies the file’s current  
version(s).  
• -dj- Restore only the  
journal files and apply  
them to the existing  
database on the  
permissions. If this option  
is not specified, the report  
to the user displays only  
user-owned entries.  
name  
File for which the version  
number will be checked.  
system.  
[ -h ]  
[ -a ]  
Displays usage.  
[ -r ]  
Indicates recursive  
processing is requested.  
[ -m | -mj [  
filesystem_name ] ]  
Specifies the file system  
metadata restore values.  
You can specify:  
Lists all available versions  
of the file (current and  
inactive).  
[ -t starttime [ endtime ] ] Indicates a time range to  
restrict the length of the  
user report. The format of  
the starttime and endtime  
parameters is:  
• -m - Restore file system  
metadata information  
for all file systems or  
for the selected  
optional file system.  
• -mj- Restore file system  
journal information for  
all file systems or for  
the selected optional  
file system.  
[ -v ]  
Verbose listing of the file’s  
current version (version  
number and modification  
time).  
YYYY:MM:DD:hh:mm:ss  
[ -c ver ]  
[ -f ]  
Modifies the file’s current  
version to the specified  
inactive version.  
[ -a ]  
[ -v ]  
Specifies active files rather  
than recoverable files when  
either reporting or  
recovering a directory.  
Forces the version change.  
Specifies the verbose  
mode during a recover  
sequence. The system  
reports on the recovered  
files.  
Page 7  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 9  
Media Management  
Command  
Options  
Description  
Command  
Options  
Description  
Command  
Options  
Description  
[ -d destinationmediaID ]  
Copies a data file to the  
destination media  
identifier.  
[ -t ]  
Indicates that detailed  
information on all media  
types associated with the  
specified archive will be  
reported.  
fschmedstate  
Modifies the state of  
media or a policy class to  
which the media belongs.  
[ -b ]  
Specifies blank media for  
media destination.  
mediaID  
The media identifier.  
For blank media:  
[ -v ]  
Indicates that all drives,  
media classes, media,  
and media types  
associated with the  
specified archive will be  
reported.  
[ -f fill ]  
Specifies the fill level  
threshold (between 0 and  
100%).  
[ -c class | -b ]  
• Changes the name of  
the associated policy  
class (-c class)  
[ -t mediatype ]  
[ -u runtime ]  
Defines media type to  
use.  
[ -I ]  
Indicates that command  
line options are read from  
stdin.  
- or -  
Maximum allowable time  
(in hours) for the  
fsmedcopy command to  
finish.  
• Changes the policy  
class to system blank  
pool (-b).  
[ -h ]  
Requests help for the  
entered command.  
[ -w fragmentation ]  
Percentage (0 to 100%)  
of wasted space out of  
filled space on media.  
[ -H hostname ]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
[ -s state ]  
The media state. Valid  
values are:  
• unsusp  
• protect  
• unprotect  
• avail  
• unavail  
• unmark  
Execution priority of the  
entered command.  
fsmedinfo  
Generates a report on  
the specified media.  
Default value: 15  
Valid values: 1 to 32  
mediaID  
The media identifier.  
[ -l ]  
Generates the long-form  
report which includes a  
list of files on the media.  
[ -R retries ]  
[ -T timeout ]  
Number of retries the CLI  
software attempts if a  
timeout is received.  
fsclean  
Removes inactive file  
version information.  
Default: 3  
fsrminfo  
Removes file information  
from the SNMS  
database.  
-m mediaID  
-s filesystem  
-c class  
The media identifier.  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
The file system to clean.  
mediaID  
The media identifier.  
Policy class associated  
with data to clean.  
[ -f ]  
Forces the removal of  
database information.  
Default: 120  
-t [ endtime ]  
Endtime option. This  
parameter should be less  
than or equal to the  
current time. The format  
of the endtime parameter  
is:  
vsarchiveqry  
Queries for information  
about an archive.  
[ -V number ]  
RPC program number for  
the software.  
Specifies the archive  
(archivename) or all  
archives (-a) to be  
queried.  
Default: 300016  
archivename | -a  
YYYY:MM:DD:hh:mm:ss  
vsdriveqry  
Queries for information  
on the specified drive.  
Default: current time  
[ -c ]  
Indicates that detailed  
information on all media  
classes associated with  
the specified archive will  
be reported.  
fsdrvclean  
fsmedcopy  
Cleans the specified  
drive.  
driveID | -a  
Indicates a specific drive  
(driveID) or all drives (-a)  
will be queried.  
drivealias  
The drive alias.  
[ -I ]  
Indicates that command  
line options are to be  
read from stdin.  
Valid values: 1 to 255  
characters  
[ -d ]  
Indicates that all drives  
associated with the  
specified archive will be  
reported.  
Copies, reports or  
defragments media.  
[ -h ]  
Requests help for the  
entered command.  
[ -m ]  
Indicates that all media  
associated with the  
specified archive will be  
reported.  
mediaID  
The media identifier.  
[ -H hostname ]  
Hostname of the Media  
Manager server.  
[ -r ]  
Initiates copy-replace for  
a medium.  
Page 10  
Page 11  
Page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command  
Options  
Description  
Command  
Options  
Description  
Command  
Options  
Description  
[ -P priority ]  
Execution priority of the  
entered command.  
[ -T timeout ]  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
mediaID  
Specifies a media type  
(mediaID) or all media  
(-a) to be queried.  
Default value: 15  
Valid values: 1 to 32  
[ -l ]  
Indicates that command  
line options are to be  
read from stdin.  
Default: 120  
[ -R retries ]  
[ -T timeout ]  
Number of retries the CLI  
software attempts if a  
timeout is received.  
[ -V number ]  
RPC program number for  
the software.  
[ -h ]  
Requests help for the  
entered command.  
Default: 3  
Default: 300016  
[ -H hostname ]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
vsmedclassqry  
Queries for the attributes  
of a media class.  
Execution priority of the  
entered command.  
mediaclass  
[ -m ]  
Specifies a media class  
(mediaclass) or all media  
classes (-a) on which to  
request information.  
Default: 15  
Default: 120  
[ -R retries ]  
[ -T timeout ]  
Number of retries the CLI  
software attempts if a  
timeout is received.  
[ -V number ]  
RPC program number for  
the software.  
Requests a list of media  
identifiers for all media  
associated with each  
reported media class.  
Default: 300016  
Default: 3  
vsdrivevary  
Changes a drive state.  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
[ -v ]  
Requests detailed  
driveID  
Specifies the drive(s)  
which state is to be  
changed.  
information for all media  
associated with each  
reported media class.  
-p drivepool  
Specifies the drive pool  
for which associated  
drives’ states will be  
changed.  
[ -I ]  
Indicates that command  
line options are to be  
read from stdin.  
Default: 120  
[ -V number ]  
RPC program number for  
the software.  
[ -H hostname ]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
-s state  
Specifies the target state  
of the specified drive.  
Default: 300016  
Execution priority of the  
entered command.  
vspoolcfg  
-p drivepool  
-c driveID  
Configures the specified  
drive pool.  
[ -v ]  
Verbose listing (status  
information) of changed  
drives.  
Default: 15  
Valid values: 1 to 32  
Creates a drive pool with  
a list of drive identifiers.  
[ -I ]  
Indicates that command  
line options are read from  
stdin.  
[ -R retries ]  
[ -T timeout ]  
Number of retries the CLI  
software attempts if a  
timeout is received.  
-d  
Deletes the drive pool.  
-i driveID  
Inserts drives into an  
existing drive pool.  
[ -h ]  
Requests help for the  
entered command.  
Default: 3  
-r driveID  
Removes drives from an  
existing drive pool.  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
[ -H hostname ]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
[ -l ]  
Indicates that command  
line options are to be  
read from stdln.  
Execution priority of the  
entered command.  
Default: 120  
Default: 15  
Valid values: 1 to 32  
[ -h ]  
Requests help for the  
entered command.  
[ -V number ]  
RPC program number for  
the software.  
[ -R retries ]  
Number of retries the CLI  
software attempts if a  
timeout is received.  
[ -H hostname]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
Default: 300016  
vsmedqry  
Queries for the attributes  
of one or more specified  
media.  
Default: 3  
Execution priority of the  
entered command.  
Page 13  
Page 14  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command  
Options  
Description  
[ -R retries ]  
Number of retries  
attempted if the software  
receives a timeout.  
[ -T timeout ]  
[ -V number ]  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
RPC program number for  
the software.  
vsreclassify  
Changes the media class  
associated with the  
specified media.  
mediaID  
Specifies one or more  
media to reclassify.  
-c currentmediaclass  
Specifies the media class  
with which specified  
media are to be  
associated.  
-n newmediaclass  
Specifies the new media  
class with which the  
specified media are to be  
associated.  
[ -v ]  
[ -l ]  
Specifies verbose output.  
Indicates that CLI options  
are to be read from stdin.  
[ -h ]  
Requests help for the  
entered command.  
[ -H hostname ]  
[ -P priority ]  
Hostname of the Media  
Manager server.  
Execution priority of the  
entered command.  
Default: 15  
[ -R retries ]  
[ -T timeout ]  
Number of retries that the  
software attempts if a  
timeout is received.  
Default: 3  
Time interval (in  
seconds) that the  
software waits for status  
before returning a  
timeout.  
Default: 120  
[ -V number ]  
RPC program number for  
the software.  
Default: 300016  
Page 16  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page 18  
Reports and Queries  
Command  
Options  
Description  
Command  
Options  
Description  
[ -s ]  
Lists all suspect media.  
fsfileinfo  
Reports the current location of  
files, whether of disk, media or  
not in the system.  
[ -d ]  
[ -h ]  
[ -t ]  
Lists all media located in a  
drive.  
Lists all media located in its  
home slot/bin.  
filename  
Full path and filename of the  
file.  
Lists all media transitioning  
between locations.  
fsqueue  
View subsystem resource  
requests.  
[ -z ]  
[ -o ]  
Lists all media exiting a storage  
area.  
[-f ]  
Reports all files in the queue or  
specific files if request  
identifiers or filenames are  
specified.  
Lists all media checked out of  
storage areas.  
[ -m ]  
Reports media movement for a  
request identifier or all media in  
the queue.  
fsstate  
Reports the state of drive  
components, storage  
subsystem, and SNMS  
software.  
filename  
Path and filename of the file.  
[ componentalias ]  
Alias for drives and storage  
subsystems.  
[ -r requestID ]  
Identifier of the request to be  
reported.  
[ -f ]  
Generates a report showing the  
status of SNMS software.  
Valid states are:  
fsmedlist  
Lists media in a data or storage  
area.  
[ -c class ]  
[ -g ]  
Policy class for which the report  
is to be generated.  
• Active  
• Not Active  
• Not Available  
Reports on blank media in the  
general scratch pool.  
fsusedspace  
Reports the total amount of  
stored, primary copy data in the  
SNMS system (in GB).  
[ -l ]  
Lists media in the long report  
format.  
[ -k ]  
Lists all media marked for  
check out.  
Copyright © 1996-2006 by ADIC. All rights reserved.  
6-00361-14 Rev A. ADIC Technical Assistance Center: in North America,  
call toll-free: 1-800-827-3822; in Europe, call toll-free: 00800-9999-3822;  
for a complete list of toll-free numbers by country. Technical Support:  
[ -m ]  
Lists all media marked for  
removal.  
[ -b ]  
[ -f ]  
[ -j ]  
Lists unformatted blank media.  
Lists formatted blank media.  
Lists all media marked to  
contain duplicate files.  
[ -p ]  
[ -q ]  
[ -a ]  
[ -n ]  
Lists all write-protected media.  
Lists media with mark error.  
Lists all available media.  
Lists all media unavailable to  
SNMS software.  
[ -u ]  
Lists all media marked as  
unavailable but still located in  
SNMS system.  
Page 1  
Page 2  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Laptop m3400g User Manual
Allied Telesis Switch AT 8000S 24 User Manual
Amana Refrigerator ABR2222FES User Manual
American Standard Outdoor Shower 3838Y1DT User Manual
AOC Flat Panel Television L42H861 User Manual
Atmel MP3 Player AT89C51SND1 User Manual
Audiovox Satellite Radio SIR PNP2 User Manual
Axis Communications Security Camera AXIS 233D User Manual
Beckett Weather Radio 7600WTM User Manual
Beko DVD Player DVD 7300 User Manual