ACTiSYS Network Card ACT IR220Li User Manual

921 Corporate Way, CA 94539, USA  
Tel: +1-510-490-8024  
Fax: +1-510-623-7268  
ACT-IR220Li / ACT-IR220LN  
IrDA® Serial Port Adapter  
User’s Manual  
April 22, 2008  
Version 1.3.1.1  
© Copyright 1999-2008 ACTiSYS Corporation  
All Rights Reserved  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
TABLE OF CONTENTS  
© Copyright 1999-2008 ACTiSYS Corp  
Page 3 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
REVISION HISTORY  
Revision History  
Revision  
1.0  
Date  
Comment  
05/15/2003 Initial released  
1.1  
03/28/2005 Added current description in Electrical characteristics  
03/28/2006 Modified DSR description in chapter of Connector Pin Definition  
02/05/2007 Extracted technical portion  
1.2  
1.3  
1.3.1  
05/15/2007 Deleted IrReady Logo & added CRoHS logo  
04/22/2008 Updated Corporate Address  
1.3.1.1  
ACTiSYS reserves the right to make changes without further notice to any products herein to improve reliability,  
function or design. ACTiSYS does not assume any liability arising out of the application or use of any product or  
circuit described herein.  
All trademarks, logos, organization & company names and product model names are owned by the respective  
organizations or companies.  
© Copyright 1999-2008 ACTiSYS Corp  
Page 4 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
1. PRODUCT INTRODUCTION  
1.1. ACT-IR220LN  
No SW Modification required. Single IR speed. You may use exactly the same RS232 protocol  
software you have now if you use it on both sides of two communicating devices. You can select one of  
the optional IR speeds: 9.6k, 19.2k, 38.4k, 57.6k, 115.2k bps as a factory preset speed for your  
application.  
1.2. ACT-IR220Li  
Replace RS232 serial wires on embedded systems without using IrDA® protocol and with self-  
programmable speed selection in user’s own application software. This is a direct replacement for  
ESI9680 in level mode.  
35.6 mm  
18.7 mm  
35.6 mm  
61.8 mm  
100 cm  
2. CONNECTOR PIN DEFINITION  
Signal Name  
DCD  
Rx  
Pin Number  
Signal Description  
1
2
3
4
5
6
7
8
9
Not Connected  
Data transmitted from IR dongle to PC  
Data transmitted from PC to IR dongle  
Supplies power and selects baud rate  
Signal Ground  
Tx  
DTR  
GND  
DSR  
RTS  
CTS  
RI  
Not Connected  
Supplies power and selects baud rate  
Not Connected  
Not Connected  
© Copyright 1999-2008 ACTiSYS Corp  
Page 5 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
3. BAUD RATE SELECTION  
3.1. ACT-IR220Li - Level Mode  
ACT-IR220Li is a baud rate selectable adapter. It supports 3 baud rates: 9.6k, 19.2k & 115.2km bps.  
3.2. ACT-IR220LN – Preset (Hardware Jumper Setting)  
ACT-IR220LN is a series product that supports 5 optional preset baud rates as below. User cannot self  
change the baud rate since it is preset at factory by jumper setting.  
Product No.  
ACT-IR220LN9.6  
ACT-IR220LN19  
ACT-IR220LN38  
ACT-IR220LN57  
ACT-IR220LN115  
Baud Rate  
9.6k bps  
19.2k bps  
38.4k bps  
57.6k bps  
115.2k bps  
4. TRANSMISSION CHARACTERISTICS  
Parameters  
IR transmit pulse width  
Optical cone angle  
Typical  
1.63  
Unit  
μS  
± 15  
Degree  
cm  
Transmission distance  
Receiver latency  
1 to 200  
100  
μS  
© Copyright 1999-2008 ACTiSYS Corp  
Page 6 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
5. SPECIFICATIONS  
IrDA® – 1.0 (SIR) compatible  
Physical Layer  
Communication Speeds  
Connection  
Programmable (9.6 k, 19.2k, 38.4k, 57.6k, 115.2k bps)  
Standard DB9F RS-232 Serial COM port to IrDA® communication  
RS-232 port power only. No external power required  
0.3 W (Peak)  
Power Source  
Power Consumption  
61.8 mm (L) X 35.6 mm (W) X 18.7 mm (H) (2.4” X 1.4” X 0.74”)  
77.2 g (2.85 oz)  
Dimensions (Excl. Cable)  
Weight  
0°C to 60°C (32°F to 140°F)  
Operating Temperature  
Cable Length  
100 cm ± 3 cm  
6. MATERIAL COMPOSITION  
Component  
Material  
ABS:  
Part Number  
UL Flame Rating  
Color  
Black /  
Beige  
GE GPP 4500 /  
GE GPM 5500  
ABS:  
Top Case  
03-502-006  
UL94HB  
Black /  
Beige  
Bottom  
Case  
GE GPP 4500/  
GE GPM 5500  
03-502-007  
UL94HB  
UL USA E 121562  
UL 94V-2 (0.061”)  
UL 94V-0 (0.12”)  
GE Lexan PC (IR)  
920A / 940A / 141L  
DYE  
Lens  
03-502-008  
03-402-004  
21051  
Black /  
Beige  
Cable  
Cable Insulation: PVC  
UL 2725 USB Cable  
Cable  
Molding  
Compound  
UL94HB  
UL94V-O  
PVC  
FR-4  
Black  
PC Board  
03-A03-001  
UL94V-O  
Green  
© Copyright 1999-2008 ACTiSYS Corp  
Page 7 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
7. REGULATORY SPECIFICATIONS  
7.1 Radiated and Conducted EMC  
FCC-B  
VCCI-2  
EN50081-1 EN55022  
(1988)  
7.2 Susceptibility Compliance  
EN50081-1  
EN55022  
(1992)  
(1998)  
EN55024  
(1998)  
(1995)  
(1995)  
(1995)  
EN61000-4-5 (1995)  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-6 (1996)  
EN61000-4-8 (1994)  
EN61000-4-11 (1994)  
EN61000-3-2 (1992)  
EN61000-3-3 (1995)  
© Copyright 1999-2008 ACTiSYS Corp  
Page 8 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
8. WARRANTY INFORMATION  
ACTiSYS Corporation warrants the first end-user purchaser, for a period of 1 year from the date of  
purchase, that this wireless interface (The Product) will be free from defective workmanship and  
materials, and agrees that it will, at its option, either repair the defect or replace the defective Product  
or part thereof at no charge to the purchaser for parts or for labor.  
This warranty does not apply to any appearance items of the Product, any consumable items  
such as paper, ink ribbon, or batteries supplied with the Product, or to any equipment or any  
hardware, software, firmware, or peripheral other than the Product. This warranty does not  
apply to any Product the exterior of which has been damaged or defected, which has been  
subjected to misuse, abnormal service or handling, or which has been altered or modified in  
design, construction or interfacing. Tampering with Label Voids Warranty.  
In order to enforce the rights under this limited warranty, the purchaser should mail, ship or carry the  
Product, together with proof of purchase, to ACTiSYS.  
The limited warranty described above is in addition to whatever implied warranties may be granted to  
purchasers by law. To the extent permitted by applicable law, ALL IMPLIED WARRANTIES INCLUDE  
THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR USER ARE LIMITED TO A  
PERIOD OF 1 YEAR FROM THE DATE OF PURCHASE. Some states do not allow limitations on  
how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties  
other than those described above, nor to extend the duration of any warranties beyond the time period  
described above on behalf of ACTiSYS. Corporation.  
The warranties described above shall be the sole and exclusive remedy available to the purchaser.  
Correction of defects, in the manner and for the period of time described above, shall constitute full  
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no  
event shall ACTiSYS Corporation be liable or in any way responsible, for any damages or defects in  
the Product which were caused by repair or attempted repairs performed by anyone other than  
ACTiSYS technician. Nor shall ACTiSYS Corporation be liable or in any way responsible for any  
incidental or consequential economic or property damage. Some states do not allow the exclusion of  
incidental or consequential damages, so the above exclusion may not apply to you.  
© Copyright 1999-2008 ACTiSYS Corp  
Page 9 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ACT-IR220Li&220LN  
User’s Manual  
The Wireless Connectivity Expert  
9. CONTACT INFORMATION  
ACTiSYS Corporation  
921 Corporate Way  
Fremont, CA 94539, USA  
TEL:+1-510-490-8024, FAX:+1-510-623-7268  
© Copyright 1999-2008 ACTiSYS Corp  
Page 10 of 10  
Apr. 22,2008  
Version 1.3.1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

3M Carbon Monoxide Alarm GD 6 User Manual
3M Oxygen Equipment 7187 User Manual
Abocom Network Card SDW11B User Manual
Acer Projector P5271n User Manual
ADTRAN Cordless Telephone IP 430 User Manual
Agilent Technologies Portable Generator E8257D 67D User Manual
Aiwa Cassette Player VX S205U User Manual
Alamo Lawn Mower T 7740 User Manual
Alcatel Lucent Switch 1850 TSS 100 User Manual
Behringer Speaker GEQ3102 User Manual