3M™ Digital Projector
Control Application Guide Version 4.12
For Models: X21i / X26i / X30n / X31/ X31i / X35n / X36 / X36i / WX36 /
WX36i / X46 / X46i / X56 / X62w / X64w / X70 / X75 / X80 / X90 /
X90K / X90W / X95 / X95i
Revision History
Revision Date
4/2009
Page(s) Changed
All pages
Description of Change
First edition, models X70, X75, X80, X90, X95, X95i
Add models X62w, X64w, X30n, X35n
Add models X31, X36, X46
4/2010
6/2010
All pages
All pages
7/2010
All pages
Add model WX36
12/2011
3/2012
All pages
All pages
Add model X56
Add model X21i, X26i
8/2012
All pages
Add model X31i, X36i, X46i, WX36i
Intended Use
The 3M™ Digital Projectors are designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware, and common line voltages (100V to
240V AC, 50/60 Hz).The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector, peripheral
equipment and/or create a potentially unsafe operating condition.
3M Digital Projectors are designed to operate in a normal office environment.
•
•
•
•
100V - 240V AC, 50/60 Hz
16° to 29° C (60° to 85° F)
10-80% RH (without condensation)
0-1828m (0-6000 feet) above sea level
The ambient operating environment should be free of airborne smoke, grease, oil and other contaminates that can effect the operation or performance of the
projector.
The 3M logo and 3M are trademarks of the 3M Company. Other trademarks used herein are the properties of their respective owners.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or
completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks
and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty and Limited Remedy
durability period as stated in the applicable 3M Product Manual in effect at the time of purchase. The warranties stated in the applicable 3M Product Manuals are
exclusive and are made in place of any and all express or implied warranties or conditions, including any implied warranty of merchantability or fitness for a
particular purpose, or any industry practice or custom or trade usage. Failure to follow the instructions contained in the appropriate 3M Product Manual or to use
the 3M Product in accordance with 3M’s Intended Use Statement will void all warranties and limited remedies.
EXCEPT AS SPECIFICALLY STATED IN THE APPLICABLE 3M PRODUCT MANUAL, 3M SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, REVENUE OR BUSINESS) RESULTING FROM, OR
IN ANY WAY RELATED TO PERFORMANCE, USE OR INABILITY TO USE ANY OF THE 3M PRODUCT.
This limitation applies regardless of the legal theory upon which damages are sought. If 3M Product is defective within the applicable warranty period, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase price of the 3M Product. All replaced parts or products
become property of 3M. If the 3M Product is repaired, 3M will repair the defective part(s) with a new or used part(s). If the 3M Product is replaced, 3M will replace
the product with the same or equivalent model and with a new or refurbished product. In the case of an approved warranty claim, the replacement 3M Product will
carry only the remaining term of the original 3M Product’s warranty period as stated in the applicable 3M Product Manual.
For warranty service, you must provide proof of the date of the original purchase, otherwise the manufacturing code date will be used to establish the start date of
the warranty. 3M Product Manuals include durability statements and may include limitations specific to the product(s) being used or its intended applications,
which take precedence over any statement made here. Warranty terms, limitations and exclusions may differ outside the United States of America.
3M Mobile Interactive Solutions
Division
6801 River Place Boulevard
Austin, Texas 78726-9000
Tel: 1-800-328-1371
© 3M 2012. All Rights Reserved.
78-6971-1513-3 [Aug. 2012]
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. INTRODUCTION.......................................................................................................................................... 3
1.1
1.2
OUTLINE................................................................................................................................................. 3
SYSTEM.................................................................................................................................................. 3
2. INSTALLATION........................................................................................................................................... 4
2.1
2.2
SYSTEM REQUIREMENTS......................................................................................................................... 4
PROJECTOR CONTROL INSTALLATION...................................................................................................... 5
3. OPERATING INSTRUCTIONS.................................................................................................................... 7
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
CREATE LOGIN ACCOUNTS ...................................................................................................................... 7
START APPLICATION............................................................................................................................... 9
MAIN WINDOW........................................................................................................................................ 9
EXIT APPLICATION ................................................................................................................................ 10
APPLICATION MINIMIZATION .................................................................................................................. 11
CONFIGURE PROJECTOR SETTINGS....................................................................................................... 11
BUTTONS ............................................................................................................................................. 14
ADVANCED CONTROL ........................................................................................................................... 15
IMAGE SEND TO PROJECTOR................................................................................................................. 61
3.10 MY IMAGE (E-SHOT).......................................................................................................................... 61
3.11 SOFTWARE VERSION............................................................................................................................. 61
・Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries.
・Pentium is the registered trademark of Intel Corporation in the US and other countries.
・All other trademarks are the property of their respected owners.
Warning
・This software is free. The manufacturer has no responsibility for any errors that may occur while using this software.
・This software, or any product used with this software may not be used for any act which obstructs the Maintenance
of the International Peace and Safety.
© 3M 2012. All Rights Reserved.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
1.1 Outline
The Projector Control Application, PJCtrl is software that allows you to control the projectors on the network or
connected via RS232C cable. With this application, the Computer can control projectors on the network
remotely.
1.2 System
The following diagram shows a typical network diagram for the Projector Tool.
RS-232C
LAN
HUB
LAN
LAN
LAN
LAN
Ethernet
/ RS-232C
Converter
RS-232C
Use a UTP cable category 5 or higher for a Local Area Network cable.
Use a cross type cable when using a serial cable.
The Projector Control Application can control up to 5 of the same model projectors.
© 3M 2012. All Rights Reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation
2.1 System Requirements
The minimum System requirements for the Projector Control Application are shown below.
(1) Operating System
Windows 2000 Professional
Windows XP
Windows Vista Home Basic / Home Premium / Business / Ultimate / Enterprise
Windows 7 Starter / Home Basic / Home Premium / Professional / Ultimate / Enterprise
Home Edition / Professional
(2) CPU
Pentium3 500MHz or higher
(3) Memory
128MB or higher
(4) Hard disk space
Minimum 20MB free space for installation
(5) Serial port
This port is required to control projectors by RS-232C
(6) LAN port
This port is required to control projectors through a network
© 3M 2012. All Rights Reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Projector Control Installation
Please follow next steps to install the software into your computer.
(1) Double click the file “InstForPJCtrl.exe”.
(2) Select the language (English, Japanese or Chinese
[Simplified]) during the installation process. And then click
[OK].
(3) Click [Next].
(4) Read “License Agreement” and select “I accept the terms of
the license agreement” and click [Next] if you agree the
license agreement. Otherwise, click [Cancel] and stop the
installation.
(5) Confirm the program folder, and then click [Next].
© 3M 2012. All Rights Reserved.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
(6) Confirm the install folder and program folder again, and then
click [Next].
(7) Click [Finish] to complete the Projector Control Application
setup wizard.
© 3M 2012. All Rights Reserved.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Operating Instructions
3.1 Create login accounts
The Projector Control Application requires a login name and password to launch the software. The Projector
User Administration Tool helps you to create new user accounts.
3.1.1 How to launch
Double Click “PJUsrEdit.exe” that is located on same folder
that you installed Projector Control Application.
It automatically launches the Projector User Administration
Tool, if no user accounts are created yet. Also Projector
Control Application has
a
short cut [File]
[User
Configuration] to launch Projector User Administration Tool.
3.1.2 How to exit
Select [File] [Exit] from the menu or click [x] bottom of the top right corner. If the changes are made, you will
be required to confirm the changes.
3.1.3 Main Window
Menu
User List
(1) Menu
Menu
Sub Menu
Save
Exit
Description
Save user data
Exit
File
Edit
Add New User
Change User
Delete User
Create new user
Edit user account
Delete user account
(2) User List
The status in the User List is described below.
Row name
Description
User Name
Description
Man
Ctrl
Img
Username (ID)
Comment
“●” shows that the user can access to the PJMan (Projector Management Tool)
“●” shows that the user can access to the PJCtrl (Projector Control Tool)
“●” shows that the user can access to the PJImg (Projector Image Tool)
“●” shows that the user can access to the PJTransfer (Projector File Transfer Tool).
FTP
© 3M 2012. All Rights Reserved.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.4 Creating new user account
Select [Edit] [Add New User] or right clicks on the user list and
select [Add New User]. The following dialog window appears.
User Name --- Define user name, up to 20 characters
Description --- Add comments, up to 50 characters
User Rights --- Define
accessibility.
It
defines
the
accessibility for the application software by
each user account. The user can use
allocation only marked application software.
--- Select all application software.
Select All
UnSel All
--- Unselect all application software.
Press [OK] button after entering user name. The [Change
Password] dialog appears. Enter new password and confirm
entered password. The password is up to 20 characters and case
sensitive.
3.1.5 Edit user account
Double click a username on the user list or select [Edit] [Change
User] after choosing user to open edit dialog. You can edit
username, description and accessibility (user rights).
Click the button to change password. Enter old and new password,
and re-enter new password to confirm.
3.1.6 Delete user account
Select [Edit] [Delete User] or right click on the user list and select [Delete User]. The confirmation window will
popup.
3.1.7 Save user account
Select [File] [Save].
The date is stored in the file, “C:\Program Files\Common Files\Projector Tools\config \UserList”.
© 3M 2012. All Rights Reserved.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Start Application
Select Windows [Start] [Program] [Projector Tools] [Projector
Control Application]. The login window is appeared.
Enter the username and password that is created by “Projector User
Administration Tool”. After logged in, a “Configuration” window is
appeared. Please refer the section 3.6 Configure Projector Settings on
page 9. Once the configuration is done, click [OK].
3.3 Main Window
Click the icon to perform each function. The functions are shown below.
[About] icon
[Image Send] icon
[Advanced] icon
[Freeze Off] icon
[Freeze On] icon
[Mute] icon
[Volume] icon
[Blank Off] icon
[Blank On] icon
[Input Source] icon
[Power Off] icon
[Power On] icon
[Configuration] icon
Note: Some icons may not show up depending on the model you choose. For example, [Image Send] icon is
only for the models CL33X, CL35X, CL67N, CL69N, CL86X, PL90X, PL92X, PL96X, WX36, WX36i, X21i, X26i,
X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56, X90 and X90K.
© 3M 2012. All Rights Reserved.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Exit Application
Right click the PJCtrl icon on the task tray at the right-bottom corner
and select [exit]. And click [Yes] on the confirmation window. Also
you can click the [x] icon on the right top corner of main window to
exit application.
© 3M 2012. All Rights Reserved.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Application Minimization
You can hide the main window into the task tray to click the minimization icon on the window. Right click the
PJCtrl icon on the task tray and select [Show] to restore window.
3.6 Configure Projector Settings
You need to setup the projector settings such as connection type and projector model. Click the [Configuration]
icon to configure settings.
(1) Projector Model
Select a projector model that you want to control from the
drop down list. The icons on the main window and Advanced
Control items are vary due to the model differences.
The discovery feature is available on CL33X, CL35X, CL67N,
CL69N, CL72X, CL73W, CL73X, CL86X, NE7, PL90X,
PL92X, PL93X, PL95X, PL96X, WX36, WX36i, X21i, X26i,
X30N, X31, X31i, X35N, X35NK, X36, X36i, X46, X46i, X56,
X62w, X64w, X90, X90K, X90w, X95, X95K, X95i and X95iK.
The discovery feature will find all projectors on the network if
the discovery feature is supported. Once the discovery is
done, the discovery result is stored in the software and you
can look up this result from “Configuration” window.
[NOTE]
Windows Security Alert will be shown on your display when
the discovery function activates, if Windows Firewall is “On”
on Windows XP SP2 or later. Please choose “Unblock” to
add the software onto the exception list. Also other firewall
security software may block the discovery function. In that
case, please add the software to the safe list or disable
firewall software when you use discovery function.
© 3M 2012. All Rights Reserved.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
(2) Connection Setting
RS-232C
--- Check the radio button and choose
COM port number for serial
connection.
NETWORK
--- Check the radio button for network
connection. Please enter the IP
address of projector and port
number. You can choose the
projector from the discovered list if
the discovery function is already run.
The default port number of PL75X,
PL80X, X70, X75, X75C, X75K, X80,
X80C and X80K is 23. The default of
CL33X, CL35X, CL67N, CL69N,
CL72X, CL73W, CL73X, CL86X,
NE7, PL93X, PL96X, WX36, WX36i,
X21i, X26i, X30N, X31, X31i, X35N,
X35NK, X36, X36i, X46, X46i, X56,
X62w, X64w, X90, X90K, X90w, X95,
X95K, X95i and X95iK is 23 or
9715. Authentication and Password
is available for CL33X, CL35X,
CL67N, CL69N, CL72X, CL73W,
CL73X, CL86X, NE7, PL90X, PL93X,
PL95X, PL92X, PL96X, WX36,
WX36i, X21i, X26i, X30N, X31, X31i,
X35N, X35NK, X36, X36i, X46, X46i,
X56, X62w, X64w, X90, X90K, X90w,
X95, X95K, X95i and X95iK.
Projector List --- The list shows the projectors that you register.
[Insert]
[Update]
[Delete]
:
:
:
Insert new projector into the projector list.
Update selected projector setting and save changes.
Delete selected projector from the projector list.
When you manage multiple projectors at the same time, you need to pick one
projector and select a checkbox in order to be a delegate for displaying CH selection
and volume level.
Please rarify IP settings to make sure the PJCtrl is able to communicate with the projector by ping
command.
(3) Configure Buttons
Click the Show Buttons TAB to configure which bottoms
you want to use. Check the checkbox that you want to
show as the button. The configuration window can be
displayed if you make a right click on the task tray icon.
Icon Size:
Also you can choose icon size from 24, 36 or 48 dots.
Always on top:
“Always on top” option allows that the PJCtrl application
always show up foreground.
© 3M 2012. All Rights Reserved.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
(4) Option
Skip user check:
Check “skip user check” option if you don’t need the
user login process at application launch. If you need to
check user account at each time, uncheck this option.
Skip configuration dialog:
Check “skip configuration dialog” option if you don’t
need to show the configuration window at application
launch.
User Configuration:
Launch Projector User Administration Tool.
Edit CH Label:
Display Edit CH Label window.
Configure CH label text that shows underneath each CH icon. The text length is depending on the icon
size as shown below.
Icon size 24x24:up to 4 characters
Icon size 36x36:up to 6 characters
Icon size 48x48: up to 8 characters
This is an example how CH label is looks like.
Update Interval:
Set the interval period to update CH status from the projector.
© 3M 2012. All Rights Reserved.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Buttons
Power ON:
Power the projector on.
Power OFF:
Power the projector off.
Input Source:
Switch the input source (CH).
The icon of current input channel is shown as “selected” icon (hollow). When you manage multiple projectors,
the status of delegated projector is shown.
Blank ON:
Blank the screen.
Blank OFF:
Un-blank the screen.
Volume:
Volume up and down. The control bar appears when you click the icon. When you manage multiple projectors,
the delegated projector’s value is displayed. Please note that the value may not the same among multiple
projectors.
Mute:
Sound mute. Toggled.
Freeze ON:
Freeze image.
Freeze OFF:
Unfreeze image.
© 3M 2012. All Rights Reserved.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3.8 Advanced Control
You can access the advanced control functions through Advanced Control Menu.
Click the “ADV” icon to open the advanced control window. Choose the target
projector to control.
Advanced control items are depending on the projector model.
■ PL80X / X70 / X80 / X80C / X80K
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
Off / On / Cool down
Input Source
Error Status
Displays the current input source.
M1-D / RGB / BNC / Video / S-Video / Component
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /
Cold Error / Filter Error / Other Error
Displays the current blank on/off status.
Off / On
Blank On /Off
Mute
Displays the current mute status.
Off / On
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[MAIN] Tab
Function
Bright
General Description
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Aspect
Switches the mode for aspect ratio.
4:3 / 16:9 / Small / Normal
Whisper
Mirror
Turn off/on the whisper mode.
Normal / Whisper
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Switches the menu language.
Language
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish
Initialize the selected function.
Reset
Bright / Contrast
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
[PICTURE-1] Tab
Function
Gamma
General Description
Switches the gamma mode.
Normal / Cinema / Dynamic / Custom
Custom Gamma
Adjusts the gamma data.
[-]: Decrease the gamma value.
[+]: Increase the gamma value.
Color Temp
Switches the color temperature mode.
Low / Middle / High / User
Custom User R
Custom User G
Custom User B
Color Bal R
Adjusts the red color level for the user mode of red color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the green color level for the user mode of green color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the blue color level for the user mode of blue color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the red color balance.
[-]: Decrease the red color balance value.
[+]: Increase the red color balance value.
Adjusts the green color balance.
[-]: Decrease the green color balance value.
[+]: Increase the green color balance value.
Adjusts the blue color balance (blue).
[-]: Decrease the blue color balance value.
[+]: Increase the blue color balance value.
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value
Adjusts the strength of whole color.
[-]: Decrease the color value.
Color Bal G
Color Bal B
Sharpness
Color
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
My Memory
Loads the data from the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Reset
Initialize the selected function.
Color Bal R / Color Bal G / Color Bal B / Sharpness / Color / Tint
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE-2] Tab
Function
Position
General Description
Adjust the display position.
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjust the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjust the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Adjust the over-scan ratio.
[-]: Decrease the over-scan value.
[+]: Increase the over-scan value.
Over Scan
Reset
Initialize the selected function.
V Position / H Position / H Size / Over Scan
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
[INPUT] Tab
Function
General Description
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Switches the mode for video format.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Turns off/on the 3D-YCS.
Component
Video Format
3D-YCS
Off / On
Video NR
Switches the noise reduction mode.
Low / Middle / High
S2-Aspect
Turns off/on the S2-aspect function
Off / On
P.IN P. Input
P.IN P. Position
P.IN P. Audio
P.IN P. Size
Power Up Input
Switches the signal input port for the child window.
Video / S-Video
Switches the display position of the child window.
Upper Left / Upper Right / Bottom Left / Bottom Right
Switches the audio source of the child window.
RGB / Video
Switches the display size of the child window.
Off / Large / Small
Switches the signal input port to display just when the projector is turned on.
Last Input / M1-D / RGB / BNC / Component / S-Video / Video
[AUTO] Tab
Function
Adjust
Power Off
General Description
[Execute]: Performs the automatic adjustment feature.
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease auto power off time.
[+]: Increase auto power off time.
Power On
Search
Turns off/on the auto power on function.
Off / On
Turns off/on the automatic signal search function.
Off / On
[SCREEN] Tab
Function
Blank
General Description
Switches the mode for the blank screen.
Blue / White / Black / MyScreen / Original
Switches the mode for the start-up screen.
Original / Off / MyScreen
Start Up
MyScreen Size
MyScreen Lock
Menu Position
Switches the size of the MyScreen.
Full / x1
Turn off/on the MyScreen lock function.
Off / On
Adjusts the menu position.
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Message
Reset
Turns off/on the message function.
Off / On
Initialize the selected function.
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
[OPTION] Tab
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Turns off/on the built-in speaker.
Off / On
Speaker
IR Remote
Turns off/on the remote sensor.
Front (Off / On)
Rear (Off / On)
Top (Off / On)
IR Remote ID
Auto Adjust
Lens Type
Lens Lock
Switches the number as an ID number for remote control.
All / 1 / 2 / 3
Switches the auto adjustment enable function.
Disable / Enable
Switches the lens type currently used.
Auto / 1 / 2 / 3 / 4 / 5
Turns off/on the lens lock function.
Off / On
[OTHER] Tab
Function
Power
General Description
Turns off/on the power.
Off / On
Input Source
Blank On / Off
Mute
Switchs the input source.
M1-D / RGB / BNC / Video / S-Video / Component
Turns off/on the blank.
Off / On
Turns off/on the mute.
Off / On
Freeze
Turn off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Adjusts the horizontal keystone distortion.
[-]: Decrease the horizontal keystone value.
[+]: Increase the horizontal keystone value.
Initialize the selected function.
Keystone V / Keystone H
Keystone V
Keystone H
Reset
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
■ PL75X / X75 / X75C / X75K
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
Off / On / Cool down
Input Source
Error Status
Displays the current input source.
DVI / RGB1 / RGB2 / Video / S-Video / Component
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /
Cold Error / Filter Error / Other Error
Displays the current blank on/off status.
Off / On
Blank On / Off
Mute
Displays the current mute status.
Off / On
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
Bright
General Description
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Adjusts the contrast.
Contrast
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
#1-Custom / #2-Custom / #3-Custom / #1-Default / #2-Default / #3-Default
Switches the mode of color temperature.
Low / Middle / High / Custom
Gamma
Color Temp
Color
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
My Memory
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Loads the data on the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Reset
Initialize the selected function
Bright / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
User Gamma Point 1
User Gamma Point 2
User Gamma Point 3
User Gamma Point 4
User Gamma Point 5
User Gamma Point 6
User Gamma Point 7
User Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
Adjusts the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
Adjusts the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
Adjusts the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
Adjusts the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temp gain value.
[+]: Increase the red color temp gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green color temp gain value.
[+]: Increase the green color temp gain value.
Adjusts the blue color temperature gain.
[-]: Decrease the blue color temp gain value.
[+]: Increase the blue color temp gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temperature offset value.
[+]: Increase the red color temperature offset value
Adjusts the green color temperature offset.
[-]: Decrease the green color temperature offset value.
[+]: Increase the green color temperature offset value
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temperature offset value.
[+]: Increase the blue color temperature offset value
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
4:3 / 16:9 / Small / Normal
Over Scan
Position
Adjusts the over-scan ratio.
[-]: Decrease the over-scan value.
[+]: Increase the over-scan value.
Adjusts the display position.
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
[VIDEO QLTY.] Tab
Function
General Description
Progressive
Switches the progress mode.
Off / TV / Film
3D-YCS
Switches the 3D-YCS mode.
Off / Normal / Still Image
Switches the noise reduction mode.
Low / Middle / High
Video NR
[INPUT] Tab
Function
General Description
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of COMPONENT VIDEO port.
Component / Scart RGB
Switches the mode for video format.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Select a signal source of the DVI-D port.
DVD / Computer
Component
Video Format
DVI
[SETUP] Tab
Function
Whisper
General Description
Turns off/on the whisper mode.
Normal / Whisper
Mirror
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Adjusts the volume.
Volume
[-]: Decrease the volume value.
[+]: Increase the volume value.
Switches the internal speaker output mode.
Mono / Stereo
Stereo
IR Remote
Turns off/on the remote sensor.
Front (Off / On)
Top (Off / On)
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese
Adjusts the menu position.
Menu Position
OSD Bright.
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Switches the brightness level of the OSD (On Screen Display).
[-]: Decrease the OSD brightness value.
[+]: Increase the OSD brightness value.
Switches the mode for the blank screen.
Blue / White / Black / MyScreen / Original
Switches the mode for the start-up screen.
Original / Off / MyScreen
Turns off/on the MyScreen lock function.
Off / On
Turns off/on the message function.
Off / On
Blank
Start Up
MyScreen Lock
Message
Reset
Initialize the selected function.
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
[OPTION] Tab
Function
General Description
One Touch
Turns off/on the automatic keystone correction function.
Off / On
Auto Search
Auto Off
Turns on/off the automatic signal search function.
Off / On
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the auto power off time.
[+]: Increase the auto power off time.
Disable/Enable the automatic adjustment.
Disable / Enable
Auto Adjust
© 3M 2012. All Rights Reserved.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
[OTHER] Tab
Function
Power
General Description
Turns off/on the Power.
Off / On
Input Source
Mode
Switches the input source.
DVI / RGB1 / RGB2 / Video / S-Video / Component
Switches the mode of picture type.
Normal / Cinema / Dynamic / Custom
Custom is displayed only. It cannot be set.
Turns off/on the blank.
Blank On / Off
Mute
Off / On
Turns off/on the mute.
Off / On
Freeze
Turns off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Adjusts the horizontal keystone distortion.
[-]: Decrease the horizontal keystone value.
[+]: Increase the horizontal keystone value.
[Execute]: Performs the automatic keystone distortion correction.
Keystone V
Keystone H
Auto Keystone
Reset
Initialize the selected function.
Keystone V / Keystone H
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
■ PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K / X95i / X95iK
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
Off / On / Cool down
Input Source
Displays the current input source.
X62w
RGB1 / RGB2 / Video / S-Video / Component / MIU
X64w
Computer1 / Computer2 / Video / S-Video / Component / MIU
PL90X / X90 / X90K
RGB1 / RGB2 / M1-D / Video / S-Video / Component
X90w
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU
PL95X / X95 / X95K / X95i / X95iK
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU
Displays the current error status.
Error Status
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Lamp Time Error /
Cold Error / Filter Error / Other Error
Displays the current blank on/off status.
Off / On
Displays the current mute status.
Off / On
Blank On / Off
Mute
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
PL90X / X62w / X90 / X90K / X90w
#1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom /
#1-Default / #2-Default / #3-Default / #4-Default / #5-Default
PL95X / X64w / X95 / X95K / X95i / X95iK
#1-Custom / #2-Custom / #3-Custom / #4-Custom / #5-Custom / #6-Custom /
#1-Default / #2-Default / #3-Default / #4-Default / #5-Default / #6-Default
Switches the color temperature mode.
PL90X / X62w / X90 / X90K / X90w
Color Temp
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Custom-High / Custom-Mid / Custom-Low /
Custom-Hi-Bright-1 / Custom-Hi-Bright-2
PL95X / X64w / X95 / X95K / X95i / X95iK
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Custom-High / Custom-Mid / Custom-Low /
Custom-Hi-Bright-1 / Custom-Hi-Bright-2 / Custom-Hi-Bright-3
Adjusts the strength of whole color.
Color
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
Active Iris
My Memory
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Changes the active iris control mode.
Off / Theater / Presentation
This function is not displayed for X62w / X64w.
Loads the data from the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Reset
Initialize the selected function
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
User Gamma Point 1
User Gamma Point 2
User Gamma Point 3
User Gamma Point 4
User Gamma Point 5
User Gamma Point 6
User Gamma Point 7
User Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
[Reset]: Initialize the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
[Reset]: Initialize the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
[Reset]: Initialize the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
[Reset]: Initialize the user gamma point 4 value.
Adjusts the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
[Reset]: Initialize the user gamma point 5 value.
Adjusts the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
[Reset]: Initialize the user gamma point 6 value.
Adjusts the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
[Reset]: Initialize the user gamma point 7 value.
Adjusts the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
[Reset]: Initialize the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temperature gain value.
[+]: Increase the red color temperature gain value.
[Reset]: Initialize the red color temperature gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green color temperature gain value.
[+]: Increase the green color temperature gain value.
[Reset]: Initialize the green color temperature gain value.
Adjusts the blue color temperature gain.
[-]: Decrease blue red color temperature gain value.
[+]: Increase the blue color temperature gain value.
[Reset]: Initialize the blue color temperature gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temperature offset value.
[+]: Increase the red color temperature offset value.
[Reset]: Initialize the red color temperature offset value.
Adjusts the green color temperature offset.
[-]: Decrease the green color temperature offset value.
[+]: Increase the green color temperature offset value.
[Reset]: Initialize the green color temperature offset value.
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temperature offset value.
[+]: Increase the blue color temperature offset value.
[Reset]: Initialize the blue color temperature offset value.
© 3M 2012. All Rights Reserved.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
4:3 / 16:9 / 14:9 / Small / Normal
Adjusts the over-scan ratio
[-]: Decrease the over-scan value.
[+]: Increase the over-scan value.
Adjusts the display position.
Over Scan
Position
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
Off / TV / Film
Video NR
3D-YCS
Switches the noise reduction mode.
Low / Mid / High
Switches the 3D-YCS mode.
Off / Movie / Still
This function is not displayed for X62w / X64w.
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Component
Video Format - Video
Video Format – S-Video
HDMI
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Changes the HDMI signal mode.
Auto / Normal / Enhanced
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.
M1-D
Changes the M1-D signal mode.
Normal / Enhanced
This function is not displayed for PL95X / X62w / X64w / X95 / X95K / X95i / X95iK.
Frame Lock
Turns off/on the frame lock function.
Off / On
This function is not displayed for PL95X / X64w / X95 / X95K / X95i / X95iK.
Turns the frame lock function off/on of the RGB IN1 port.
Off / On
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.
Turns the frame lock function off/on of the COMPUTER IN1 port.
Off / On
Frame Lock - RGB1
Frame Lock-Computer1
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Frame Lock - RGB2
Turns the frame lock function off/on of the RGB IN2 port.
Off / On
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.
Turns the frame lock function off/on of the COMPUTER IN2 port.
Off / On
Frame Lock-Computer2
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Frame Lock - HDMI
RGB in - RGB1
Turns the frame lock function off/on of the HDMI port.
Off / On
This function is not displayed for PL90X / X62w / X64w / X90 / X90K / X90w.
Selects the RGB input signal type of the RGB IN1 port.
PL95X / X95 / X95K / X95i / X95iK
Sync On G Off / Auto
PL90X / X62w / X90 / X90K / X90w
Sync On G Off / Sync On G On
This function is not displayed for X64w.
Selects the computer input signal type of the COMPUTER IN1 port.
Sync On G Off / Sync On G On
Computer in-1
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
© 3M 2012. All Rights Reserved.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB in - RGB2
Selects the RGB input signal type of the RGB IN2 port.
PL95X / X95 / X95K / X95i / X95iK
Sync On G Off / Auto
PL90X / X62w / X90 / X90K / X90w
Sync On G Off / Sync On G On
This function is not displayed for X64w.
Selects the computer input signal type of the COMPUTER IN2 port.
Sync On G Off / Sync On G On
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Computer in-2
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Keystone H
Corrects the horizontal keystone distortion.
[-]: Decrease the horizontal keystone value.
[+]: Increase the horizontal keystone value.
This function is not displayed for X62w / X64w.
Whisper
Mirror
Turns off/on the whisper mode.
Normal / Whisper
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Volume
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Speaker
Turns off/on the built-in speaker.
Off / On
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Audio RGB1
Audio-Computer1
Audio RGB2
Audio-Computer2
Assigns the audio port when the RGB IN1 input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Assigns the audio port when the COMPUTER IN1 input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Assigns the audio port when the RGB IN2 input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X64w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Assigns the audio port when the COMPUTER IN2 input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K / X95i /
X95iK.
Audio Video
Assigns the audio port when the VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Assigns the audio port when the S-VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3
Audio S-Video
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Assigns the audio port when the COMPONENT input port is selected.
Off / Audio1 / Audio2 / Audio3
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Assigns the audio port when the MIU input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio MIU
Audio Component
Audio MIU
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Assigns the MONITOR OUT when the RGB IN1 input port is selected.
Off / RGB1
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT when the RGB IN2 input port is selected.
Off / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT when the HDMI input port is selected.
Off / RGB1 / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Off / RGB1 / RGB2
Monitor Out-RGB1
Monitor Out-RGB2
Monitor Out-HDMI
Monitor Out-Component
Monitor Out-S-Video
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Off / RGB1 / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
© 3M 2012. All Rights Reserved.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor Out-Video
Monitor Out-MIU
Monitor Out Standby
Reset
Assigns the MONITOR OUT when the VIDEO input port is selected.
Off / RGB1 / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT when the MIU input port is selected.
Off / RGB1 / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Assigns the MONITOR OUT in the standby mode.
Off / RGB1 / RGB2
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Initialize the selected function.
X62w / X64w
Keystone V
PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK
Keystone V / Keystone H
[Execute]: After the confirmation message, the selected function will be initialized.
[AUDIO] Tab
This tab is displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK.
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Treble
Bass
Adjusts the treble level.
[-]: Decrease the treble value.
[+]: Increase the treble value.
Adjusts the bass level.
[-]: Decrease the bass value.
[+]: Increase the bass value.
SRS WOW
Speaker
Switches the mode for SRS WOW mode.
Off / Mid / High
Turns off/on the built-in speaker.
Off / On
Audio - RGB1
Audio - RGB2
Audio - M1-D
Assigns the audio port when the RGB IN1 input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
Assigns the audio port when the RGB IN2 input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
Assigns the audio port when the M1-D input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
This function is not displayed for PL95X / X95 / X95K / X95i / X95iK.
Assigns the audio port when the HDMI input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio HDMI
This function is not displayed for PL90X / X90 / X90K / X90w.
Assigns the audio port when the VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
Assigns the audio port when the S-VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
Assigns the audio port when the COMPONENT input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4
Assigns the audio port when the MIU input port is selected.
Off / Audio1 / Audio2 / Audio3 / Audio4 / Audio MIU
This function is not displayed for PL90X / X90 / X90K.
Assigns the audio port in the standby mode.
Off / Audio1 / Audio2 / Audio3 / Audio4
This function is not displayed for PL90X / PL95X / X90 / X90K / X90w / X95 / X95K.
Switches the mode for the HDMI audio.
Audio - HDMI
Audio - Video
Audio - S-Video
Audio - Component
Audio MIU
Audio Out Standby
HDMI Audio
1 / 2
This function is not displayed for PL90X / X90 / X90K / X90w.
© 3M 2012. All Rights Reserved.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese
Adjusts the menu position.
Menu Position
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Blank
Switches the mode for the blank screen.
Blue / White / Black / MyScreen / Original
Switches the mode for the start-up screen.
Original / Off / MyScreen
Start Up
MyScreen Lock
Message
Template
Turns off/on the MyScreen lock function.
Off / On
Turns off/on the message function.
Off / On
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Initialize the selected function.
Reset
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
[OPTION] Tab
Function
General Description
Auto Search
Turns off/on the automatic signal search function.
Off / On
Auto Keystone
Auto On
Turns off/on the automatic keystone function.
Off / On
Turns off/on the auto on function.
Off / On
Auto Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the auto power off time.
[+]: Increase the auto power off time.
My Button-1
Assigns the function for the MY BUTTON-1 button on the included remote control.
X62w
RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume-
X64w
Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume- / Live Mode / Thumbnail /
Slide Show / Directory / Remove Media
PL90X / X90 / X90K
RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-
X90w
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-
PL95X / X95 / X95K
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume- / AV Mute /
Live Mode / Thumbnail / Slide Show / Directory / Remove Media
X95i / X95iK
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / My Image / AV Mute / Template / Live Mode /
Thumbnail / Slide Show / Directory / Remove Media / Other
Assigns the function for the MY BUTTON-2 button on the included remote control.
X62w
My Button-2
RGB1 / RGB2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume-
X64w
Computer1 / Computer2 / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / e-SHOT / Volume+ / Volume- / Live Mode / Thumbnail /
Slide Show / Directory / Remove Media
PL90X / X90 / X90K
RGB1 / RGB2 / M1-D / Video / S-Video / Component / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-
X90w
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume-
PL95X / X95 / X95K
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / e-SHOT / Volume+ / Volume- / AV Mute /
Live Mode / Thumbnail / Slide Show / Directory / Remove Media
X95i / X95iK
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU / Information / Auto Keystone Execute /
My Memory / Picture Mode / Filter Reset / Active Iris / My Image / AV Mute / Template / Live Mode /
Thumbnail / Slide Show / Directory / Remove Media / Other
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
Selects the Closed Caption Display setting.
My Source
C.C. - Display
C.C. - Mode
C.C. - Channel
Off / On / Auto
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.
Selects the Closed Caption Mode setting.
Captions / Text
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
This function is not displayed for PL90X / PL95X / X62w / X90 / X90K / X90w / X95 / X95K.
© 3M 2012. All Rights Reserved.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Function
General Description
Auto Adjust
Selects the automatic adjustment mode.
PL95X / X64w / X95 / X95K / X95i / X95iK
Disable / Fast / Fine
PL90X / X62w / X90 / X90K / X90w
Disable / Enable
Remote Receiv.
Turns off/on the remote sensor.
PL90X / PL95X / X90 / X90K / X90w / X95 / X95K / X95i / X95iK
Front (Off / On)
Rear (Off / On)
Top (Off / On)
This function is not displayed for X62w / X64w.
Changes the projector’s remote sensor off/on of the normal frequency.
Disable / Enable
Changes the projector’s remote sensor off/on of the high frequency.
Disable / Enable
Remote Freq. - Normal
Remote Freq. - High
[OTHER] Tab
Function
Power
General Description
Turns off/on the power.
Off / On
Input Source
Switches the input source.
X62w
RGB1 / RGB2 / Video / S-Video / Component / MIU
X64w
Computer1 / Computer2 / Video / S-Video / Component / MIU
PL90X / X90 / X90K
RGB1 / RGB2 / M1-D / Video / S-Video / Component
X90w
RGB1 / RGB2 / M1-D / Video / S-Video / Component / MIU
PL95X / X95 / X95K / X95i / X95iK
RGB1 / RGB2 / HDMI / Video / S-Video / Component / MIU
Switches the picture mode.
Picture Mode
PL90X / X62w / X90 / X90K / X90w
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Custom
PL95X / X64w / X95 / X95K / X95i / X95iK
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / White Board / Daytime / Custom
Custom is displayed only. It cannot be set.
Turns off/on the blank.
Blank On / Off
Mute
Off / On
Turns off/on the mute.
Off / On
Freeze
Turns off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
e-SHOT
Displays the e-SHOT data.
Off / Image1 / Image2 / Image3 / Image4
This function is not displayed for X95i / X95iK.
Displays the My Image data.
My Image
Off / Image1 / Image2 / Image3 / Image4
This function is not displayed for PL90X / PL95X / X62w / X64w / X90 / X90K / X90w / X95 / X95K.
© 3M 2012. All Rights Reserved.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
■ X30N / X35N / X35NK
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
On / Standby / Cool down
Input Source
Error Status
Displays the current input source.
Computer in1 / Computer in2 / Component / S-Video / Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /
Filter Error / Other Error
Blank On/Off
Mute
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Color Temp
Color
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
#1 Custom / #2 Custom / #3 Custom / #4 Custom / #5 Custom / #6 Custom / #1 Default /
#2 Default / #3 Default / #4 Default / #5 Default / #6 Default /
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / #1 Custom / #2 Custom / #3 Custom /
#4 Custom / #5 Custom / #6 Custom
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Active Iris
Changes the active iris control mode.
Presentation / Theater / Off
My Memory
Loads the data from the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Reset
Initialize the selected function
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp
User Gamma Point 1
User Gamma Point 2
User Gamma Point 3
User Gamma Point 4
User Gamma Point 5
User Gamma Point 6
User Gamma Point 7
User Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
[Reset]: Initialize the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
[Reset]: Initialize the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
[Reset]: Initialize the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
[Reset]: Initialize the user gamma point 4 value.
Adjusts the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
[Reset]: Initialize the user gamma point 5 value.
Adjusts the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
[Reset]: Initialize the user gamma point 6 value.
Adjusts the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
[Reset]: Initialize the user gamma point 7 value.
Adjusts the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
[Reset]: Initialize the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temperature gain value.
[+]: Increase the red color temperature gain value.
[Reset]: Initialize the red color temperature gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green color temperature gain value.
[+]: Increase the green color temperature gain value.
[Reset]: Initialize the green color temperature gain value.
Adjusts the blue color temperature gain.
[-]: Decrease the blue color temperature gain value.
[+]: Increase the blue color temperature gain value.
[Reset]: Initialize the blue color temperature gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temperature offset value.
[+]: Increase the red color temperature offset value.
[Reset]: Initialize the red color temperature offset value.
Adjusts the green color temperature offset.
[-]: Decrease the green color temperature offset value.
[+]: Increase the green color temperature offset value.
[Reset]: Initialize the green color temperature offset value.
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temperature offset value.
[+]: Increase the blue color temperature offset value.
[Reset]: Initialize the blue color temperature offset value.
© 3M 2012. All Rights Reserved.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
Normal / 4:3 / 16:9 / 16:10 / 14:9
Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Adjusts the display position.
Over Scan
Position
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
TV / FILM / Off
Video NR
Switches the noise reduction mode.
High / Mid / Low
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Component
S-Video Format
C-Video Format
Frame Lock - Computer in1
Frame Lock - Computer in2
Computer in1
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Computer in2
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Turns off/on the eco mode.
Eco Mode
Normal / Eco
Mirror
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Standby Mode
Switches the standby mode setting.
Normal / Saving
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - Component
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
[AUDIO] Tab
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Turns on/off the built-in speaker.
On / Off
Speaker
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.
Off / Audio1 / Audio2 / Audio3
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.
Off / Audio1 / Audio2 / Audio3
Audio Source - Component
Audio Source - S-Video
Audio Source - Video
Audio Out Standby
Assigns the audio port when the COMPONENT input port is selected.
Off / Audio1 / Audio2 / Audio3
Assigns the audio port when the S-VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3
Assigns the audio port when the VIDEO input port is selected.
Off / Audio1 / Audio2 / Audio3
Assigns the audio port in the standby mode.
Off / Audio1 / Audio2 / Audio3
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese
Adjusts the menu position.
Menu Position
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Blank
Switches the mode for the blank screen.
MyScreen / Original / Blue / White / Black
Switches the mode for the start-up screen.
MyScreen / Original / Off
Start Up
MyScreen Lock
Message
Turns on/off the MyScreen lock function.
On / Off
Turns on/off the message function.
On / Off
Template
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4
Selects the Closed Caption Display setting.
Auto / On / Off
Selects the Closed Caption Mode setting.
Captions / Text
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
Initialize the selected function.
C.C. - Display
C.C. – Mode
C.C. - Channel
Reset
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
[OPTION] Tab
Function
General Description
Auto Search
Turns on/off the automatic signal search function.
On / Off
Auto Keystone
Direct On
Turns on/off the automatic keystone function.
On / Off
Turns on/off the direct on function.
On / Off
Auto Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the auto power off time.
[+]: Increase the auto power off time.
My Button-1
My Button-2
My Source
Assigns the function for the MY BUTTON-1 button on the included remote control.
Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute /
My Memory / Active Iris / Picture Mode / Filter Reset / Template / AV Mute / My Image / Messenger /
Other
Assigns the function for the MY BUTTON-2 button on the included remote control.
Computer in1 / Computer in2 / Component / S-Video / Video / Information / Auto Keystone Execute /
My Memory / Active Iris / Picture Mode / Filter Reset / Template / AV Mute / My Image / Messenger /
Other
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.
Computer in1 / Computer in2 / Component / S-Video / Video
© 3M 2012. All Rights Reserved.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Function
General Description
Remote Frequency - Normal
Changes the projector’s remote sensor off/on of the normal frequency.
Disable / Enable
Remote Frequency - High
Changes the projector’s remote sensor off/on of the high frequency.
Disable / Enable
[OTHER] Tab
Function
Power
General Description
Turns on/off the power.
On / Off
Input Source
Picture Mode
Switches the input source.
Computer in1 / Computer in2 / Component / S-Video / Video
Switches the picture mode.
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom
Custom is displayed only. It cannot be set.
Turns on/off the blank.
Blank On/Off
Mute
On / Off
Turns on/off the mute.
On / Off
Freeze
Turns off/on the freeze.
Normal / Freeze
Template On/Off
Magnify
Turns on/off the template screen.
On / Off
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Displays the My Image data.
Off / Image-1 / Image-2 / Image-3 / Image-4
Deletes the My Image data.
Image-1 / Image-2 / Image-3 / Image-4
My Image
My Image Delete
© 3M 2012. All Rights Reserved.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
■ CL67N / CL69N / PL92X / WX36 / X31 / X36 / X46
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
On / Standby / Cool down
Input Source
Error Status
Displays the current input source.
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /
Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /
Other Error
Blank On/Off
Mute
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Color Temp
Color
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 /
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Active Iris
Changes the active Iris control mode.
Presentation / Theater / Off
My Memory
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
Saves the current adjustment data into the memory.
Save-1 / Save-2 / Save-3 / Save-4
[Execute]: Performs each function.
Initialize the selected function
Reset
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp
Gamma Point 1
Gamma Point 2
Gamma Point 3
Gamma Point 4
Gamma Point 5
Gamma Point 6
Gamma Point 7
Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
[Reset]: Initialize the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
[Reset]: Initialize the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
[Reset]: Initialize the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
[Reset]: Initialize the user gamma point 4 value.
Adjusts the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
[Reset]: Initialize the user gamma point 5 value.
Adjusts the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
[Reset]: Initialize the user gamma point 6 value.
Adjusts the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
[Reset]: Initialize the user gamma point 7 value.
Adjusts the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
[Reset]: Initialize the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 Steps Gray Scale / 15 Steps Gray Scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temperature gain value.
[+]: Increase the red color temperature gain value.
[Reset]: Initialize the red color temperature gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green color temperature gain value.
[+]: Increase the green color temperature gain value.
[Reset]: Initialize the green color temperature gain value.
Adjusts the blue color temperature gain.
[-]: Decrease the blue color temperature gain value.
[+]: Increase the blue color temperature gain value.
[Reset]: Initialize the blue color temperature gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temperature offset value.
[+]: Increase the red color temperature offset value.
[Reset]: Initialize the red color temperature offset value.
Adjusts the green color temperature offset.
[-]: Decrease the green color temperature offset value.
[+]: Increase the green color temperature offset value.
[Reset]: Initialize the green color temperature offset value.
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temperature offset value.
[+]: Increase the blue color temperature offset value.
[Reset]: Initialize the blue color temperature offset value.
© 3M 2012. All Rights Reserved.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
CL67N / CL69N / PL92X / X31 / X36 / X46
Normal / 4:3 / 16:9 / 16:10 / 14:9
WX36
Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native
Over Scan
Position
Adjusts the over-scan ratio
[-]: Decrease the over-scan value.
[+]: Increase the over-scan value.
Adjusts the display position.
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
TV / FILM / Off
Video NR
Switches the noise reduction mode.
High / Mid / Low
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Component
S-Video Format
C-Video Format
HDMI Format
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the video format for an input from the HDMI port.
Auto / Video / Computer
HDMI Range
Changes the digital range for input from the HDMI port.
Auto / Normal / Enhanced
Computer in1
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Computer in2
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
Frame Lock - Computer in1
Frame Lock - Computer in2
Frame Lock - HDMI
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the frame lock function on/off of the HDMI port.
On / Off
© 3M 2012. All Rights Reserved.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion correction.
Adjusts the vertical keystone distortion
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Turns on/off the auto eco mode.
Auto Eco Mode
On / Off
Eco Mode
Turns off/on the eco mode.
Normal / Eco
Mirror
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Standby Mode
Switches the standby mode setting.
Normal / Saving
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - LAN
Monitor Out - USB TYPE A
Monitor Out - USB TYPE B
Monitor Out - HDMI
Monitor Out - Component
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the LAN input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE A input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE B input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the HDMI input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
[AUDIO] Tab
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Speaker
Turns on/off the built-in speaker.
On / Off
Mic Level
Mic Volume
Switches the input level to match that of the microphone connected to the MIC port.
High / Low
Adjusts the volume of the microphone connected to the MIC port.
[-]: Decrease the volume of the microphone.
[+]: Increase the volume of the mocrophone.
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Audio Source - LAN
Assigns the audio port when the LAN input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Audio Source - USB TYPE A Assigns the audio port when the USB TYPE A input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Audio Source - USB TYPE B Assigns the audio port when the USB TYPE B input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Audio Source - HDMI
Audio Source - Component
Audio Source - S-Video
Audio Source - Video
Audio Source - Standby
HDMI Audio
Assigns the audio port when the HDMI input port is selected.
Off / Audio in1 / Audio in2 / Audio in3 / Audio HDMI
Assigns the audio port when the COMPONENT input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Assigns the audio port when the S-VIDEO input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Assigns the audio port when the VIDEO input port is selected.
Off / Audio in1 / Audio in2 / Audio in3
Assigns the audio port in the standby mode.
Off / Audio in1 / Audio in2 / Audio in3
Switches the mode for the HDMI audio.
1 / 2
© 3M 2012. All Rights Reserved.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish / Traditional Chinese
Adjusts the menu position.
Menu Position
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Blank
Switches the mode for the blank screen.
MyScreen / Original / Blue / White / Black
Switches the mode for thr start-up screen.
MyScreen / Original / Off
Start Up
MyScreen Lock
Message
Turns on/off the MyScreen lock function.
On / Off
Turns on/off the message function.
On / Off
Template
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2
Selects the Closed Caption Display setting.
Auto / On / Off
Selects the Closed Caption Mode setting.
Captions / Text
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
Initialize the selected function.
C.C. – Display
C.C. – Mode
C.C. – Channel
Reset
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
[OPTION] Tab
Function
General Description
Auto Search
Turns on/off the automatic signal search function.
On / Off
Auto Keystone
Direct Power On
Auto Power Off
Turns on/off the automatic keystone function.
On / Off
Turns on/off direct power on function.
On / Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the auto power off time.
[+]: Increase the auto power off time.
USB TYPE B
My Button-1
Selects the function of USB TYPE B port.
Mouse / USB Display
Assigns the function for the MY BUTTON-1 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other
Assigns the function for the MY BUTTON-2 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control..
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /
Video
My Button-2
My Source
Service
Function
General Description
Remote Freq. - Normal
Changes the projector’s remote sensor off/on of the normal frequency.
Disable / Enable
Remote Freq. - High
Changes the projector’s remote sensor off/on of the high frequency.
Disable / Enable
© 3M 2012. All Rights Reserved.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
[OTHER] Tab
Function
Power
General Description
Turns on/off the power.
Off / On
Input Source
Picture Mode
Switches the input source.
Computer in1 / Computer in2 / LAN / USB TYPE A / USB TYPE B / HDMI / Component / S-Video /
Video
Switches the picture mode.
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom
Custom is displayed only. It cannot be set.
Turns on/off the blank.
Off / On
Turns on/off the mute.
Off / On
Blank On/Off
Mute
Freeze
Turns on/off the freeze.
On / Off
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the magnify position.
Magnify Position
[
[
[
[
]: Decrease the vertical magnify position value.
]: Increase the vertical magnify position value.
]: Decrease the horizontal magnify position value.
]: Increase the horizontal magnify position value.
Template On/Off
My Image
Turns on/off the template screen.
On / Off
Displays the My Image data.
Image-Off / Image-1 / Image-2 / Image-3 / Image-4
My Image Delete
Messenger
Deletes the My Image data.
Image-1 / Image-2 / Image-3 / Image-4
Displays the Messenger.
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12
© 3M 2012. All Rights Reserved.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
■ CL86X / PL96X / X56
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
On / Standby / Cool down
Input Source
Error Status
Displays the current Input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /
Other Error
Blank On/Off
Mute
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Stack Mode
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Displays the stack mode status.
Main / Sub
This item is not displayed when stack mode status is off.
Initialize the selected function.
Lamp Time / Filter Time
Reset
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Color Temp
Color
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Active Iris
Changes the active iris control mode.
Presentation / Theater / Off
My Memory
Saves the current adjustment data into the memory.
Save-1 / Save-2 / Save-3 / Save-4
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
[Execute]: Performs each function.
Reset
Initialize the selected function.
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Gamma Point 1
Gamma Point 2
Gamma Point 3
Gamma Point 4
Gamma Point 5
Gamma Point 6
Gamma Point 7
Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
[Reset]: Initialize the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
[Reset]: Initialize the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
[Reset]: Initialize the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
[Reset]: Initialize the user gamma point 4 value.
Setting the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
[Reset]: Initialize the user gamma point 5 value.
Setting the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
[Reset]: Initialize the user gamma point 6 value.
Setting the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
[Reset]: Initialize the user gamma point 7 value.
Setting the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
[Reset]: Initialize the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temp gain value.
[+]: Increase the red color temp gain value.
[Reset]: Initialize the red color temp gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green color temp gain value.
[+]: Increase the green color temp gain value.
[Reset]: Initialize the green color temp gain value.
Adjusts the blue color temperature gain.
[-]: Decrease the blue color temp gain value.
[+]: Increase the blue color temp gain value.
[Reset]: Initialize the blue color temp gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temp offset value.
[+]: Increase the red color temp offset value.
[Reset]: Initialize the red color temp offset value.
Adjusts the green color temperature offset.
[-]: Decrease the green color temp offset value.
[+]: Increase the green color temp offset value.
[Reset]: Initialize the green color temp offset value.
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temp offset value.
[+]: Increase the blue color temp offset value.
[Reset]: Initialize the blue color temp offset value.
© 3M 2012. All Rights Reserved.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
Normal / 4:3 / 16:9 / 16:10 / 14:9
Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Adjusts the display position.
Over Scan
Position
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
TV / Film / Off
Video NR
Switches the noise reduction mode.
High / Mid / Low
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Component
Video Format - S-Video
Video Format - Video
HDMI Format
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the video format for an input from the HDMI port.
Auto / Video / Computer
HDMI Range
Changes the digital range for an input from the HDMI port.
Auto / Normal / Enhanced
Computer in - Computer in1
Computer in - Computer in2
Frame Lock - Computer in1
Frame Lock - Computer in2
Frame Lock - HDMI
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the frame lock function on/off of the HDMI port.
On / Off
© 3M 2012. All Rights Reserved.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Corrects the horizontal keystone distortion.
[-]: Decrease the horizontal keystone value.
[+]: Increase the horizontal keystone value.
[Settings...]: Displays the Perfect Fit dialog.
Turns on/off the auto eco mode.
Keystone H
Perfect Fit
Auto Eco Mode
On / Off
Eco Mode
Turns off/on the eco mode.
Normal / Eco
Mirror
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Standby Mode
Switches the standby mode setting.
Normal / Saving
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - LAN
Monitor Out - USB type A
Monitor Out - USB type B
Monitor Out - HDMI
Monitor Out - Component
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the LAN input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE A input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE B input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the HDMI input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V / Keystone H
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Perfect Fit
Function
General Description
Perfect Fit
Selects the perfect fit enable setting.
Enable / Disable
Corner Position
Left Top V
Adjusts the shape of the projected image in left top corner.
[-]: Decrease the vertical value.
[+]: Increase the vertical value.
Left Top H
Adjusts the shape of the projected image in left top corner.
[-]: Decrease the horizontal value.
[+]: Increase the horizontal value.
Left Bottom V
Left Bottom H
Right Top V
Adjusts the shape of the projected image in left bottom corner.
[-]: Decrease the vertical value.
[+]: Increase the vertical value.
Adjusts the shape of the projected image in left bottom corner.
[-]: Decrease the horizontal value.
[+]: Increase the horizontal value.
Adjusts the shape of the projected image in right top corner.
[-]: Decrease the vertical value.
[+]: Increase the vertical value.
Right Top H
Right Bottom V
Right Bottom H
Adjusts the shape of the projected image in right top corner.
[-]: Decrease the horizontal value.
[+]: Increase the horizontal value.
Adjusts the shape of the projected image in right bottom corner.
[-]: Decrease the vertical value.
[+]: Increase the vertical value.
Adjusts the shape of the projected image in right bottom corner.
[-]: Decrease the horizontal value.
[+]: Increase the horizontal value.
Line Distortion
Left Distortion
Adjusts the shape of the projected image in left side distortion.
[-]: Decrease the left side distortion value.
[+]: Increase the left side distortion value.
Right Distortion
Distortion Position V
Top Distortion
Adjusts the shape of the projected image in right side distortion.
[-]: Decrease the right side distortion value.
[+]: Increase the right side distortion value.
Adjusts the vertical distortion position.
[-]: Decrease the vertical distortion position value.
[+]: Increase the vertical distortion position value.
Adjusts the shape of the projected image in top side distortion.
[-]: Decrease the top side distortion value.
[+]: Increase the top side distortion value.
Bottom Distortion
Distortion Position H
Adjusts the shape of the projected image in bottom side distortion.
[-]: Decrease the bottom side distortion value.
[+]: Increase the bottom side distortion value.
Adjusts the horizontal distortion position.
[-]: Decrease the horizontal distortion position value.
[+]: Increase the horizontal distortion position value.
After the confirmation message, the Perfect Fit function will be initialized.
Reset
© 3M 2012. All Rights Reserved.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
[AUDIO] Tab
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Speaker
Turns on/off the built-in speaker.
On / Off
Mic Level
Mic Volume
Switches the input level to match that of the microphone connected to the MIC port.
High / Low
Adjusts the volume of the microphone connected to the MIC port.
[-]: Decrease the volume of the microphone.
[+]: Increase the volume of the microphone.
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Audio Source - LAN
Assigns the audio port when the LAN input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Audio Source - USB type A
Audio Source - USB type B
Audio Source - HDMI
Audio Source - Component
Audio Source - S-Video
Audio Source - Video
Audio Source - Standby
HDMI Audio
Assigns the audio port when the USB TYPE A input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port when the USB TYPE B input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port when the HDMI input port is selected.
Audio HDMI / Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port when the COMPONENT input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port when the S-VIDEO input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port when the VIDEO input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the audio port in the standby mode.
Audio in1 / Audio in2 / Audio in3 / Off
Switches the mode for the HDMI audio.
1 / 2
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish
Adjusts the menu position.
Menu Position
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Blank
Switches the mode for the blank screen.
MyScreen / Original / Blue / White / Black
Switches the mode for the start-up screen.
MyScreen / Original / Off
Start Up
MyScreen Lock
Message
Template
Turns on/off the MyScreen lock function.
On / Off
Turns on/off the message function.
On / Off
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2 /
Stack
C.C. – Display
C.C. – Mode
C.C. - Channel
Reset
Selects the Closed Caption Display setting.
Auto / On / Off
Selects the Closed Caption Mode setting.
Captions / Text
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
Initialize the selected function.
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
[OPTION] Tab
Function
General Description
Auto Search
Turns on/off the automatic signal search function.
On / Off
Auto Keystone
Direct Power On
Auto Power Off
Turns on/Off the automatic keystone function.
On / Off
Turns on/off the Direct Power On function.
On / Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the Auto Power off time.
[+]: Increase the Auto Power off time.
USB type B
My Button-1
Selects the function of USB TYPE B port.
Mouse / USB Display
Assigns the function for the MY BUTTON-1 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other
Assigns the function for the MY BUTTON-2 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video / Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode / Other
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video
My Button-2
My Source
Service
Function
General Description
Remote Freq. - Normal
Changes the projector’s remote sensor on/off of the normal frequency.
Enable / Disable
Remote Freq. - High
Changes the projector’s remote sensor on/off of the high frequency.
Enable / Disable
[OTHER] Tab
Function
Power
General Description
Turns on/off the power.
On / Off
Input Source
Picture Mode
Switches the input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / Component / S-Video /
Video
Switches the picture mode.
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom
Custom is displayed only. It cannot be set.
Turns on/off the blank.
On / Off
Turns on/off the mute.
On / Off
Blank On/Off
Mute
Freeze
Turns off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the magnify position.
Magnify Position
[
[
[
[
]: Decrease the vertical magnify position value.
]: Increase the vertical magnify position value.
]: Decrease the horizontal magnify position value.
]: Increase the horizontal magnify position value.
Template
Turns on/off the template screen.
On / Off
My Image
Displays the My Image data.
Image-Off / Image-1 / Image-2 / Image-3 / Image-4
My Image Delete
Messenger
Deletes the My Image data.
Image-1 / Image-2 / Image-3 / Image-4
Displays the Messenger.
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12
© 3M 2012. All Rights Reserved.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
■ CL33X / CL35X / X21i / X26i
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
On / Standby / Cool down
Input Source
Error Status
Displays the current Input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error / Filter Error /
Other Error
Blank On/Off
Mute
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Color Temp
Color
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
My Memory
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Saves the current adjustment data into the memory.
Save-1 / Save-2 / Save-3 / Save-4
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
[Execute]: Performs each function.
Reset
Initialize the selected function.
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Gamma Point 1
Gamma Point 2
Gamma Point 3
Gamma Point 4
Gamma Point 5
Gamma Point 6
Gamma Point 7
Gamma Point 8
Adjusts the user gamma point 1.
[-]: Decrease the user gamma point 1 value.
[+]: Increase the user gamma point 1 value.
[Reset]: Initialize the user gamma point 1 value.
Adjusts the user gamma point 2.
[-]: Decrease the user gamma point 2 value.
[+]: Increase the user gamma point 2 value.
[Reset]: Initialize the user gamma point 2 value.
Adjusts the user gamma point 3.
[-]: Decrease the user gamma point 3 value.
[+]: Increase the user gamma point 3 value.
[Reset]: Initialize the user gamma point 3 value.
Adjusts the user gamma point 4.
[-]: Decrease the user gamma point 4 value.
[+]: Increase the user gamma point 4 value.
[Reset]: Initialize the user gamma point 4 value.
Adjusts the user gamma point 5.
[-]: Decrease the user gamma point 5 value.
[+]: Increase the user gamma point 5 value.
[Reset]: Initialize the user gamma point 5 value.
Adjusts the user gamma point 6.
[-]: Decrease the user gamma point 6 value.
[+]: Increase the user gamma point 6 value.
[Reset]: Initialize the user gamma point 6 value.
Adjusts the user gamma point 7.
[-]: Decrease the user gamma point 7 value.
[+]: Increase the user gamma point 7 value.
[Reset]: Initialize the user gamma point 7 value.
Adjusts the user gamma point 8.
[-]: Decrease the user gamma point 8 value.
[+]: Increase the user gamma point 8 value.
[Reset]: Initialize the user gamma point 8 value.
Color Temp - Custom -
Function
General Description
Test Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the red color temperature gain.
[-]: Decrease the red color temperature gain value.
[+]: Increase the red color temperature gain value.
[Reset]: Initialize the red color temperature gain value.
Adjusts the green color temperature gain.
[-]: Decrease the green temperature temp gain value.
[+]: Increase the green color temperature gain value.
[Reset]: Initialize the green color temperature gain value.
Adjusts the blue color temperature gain.
[-]: Decrease the blue color temperature gain value.
[+]: Increase the blue color temperature gain value.
[Reset]: Initialize the blue color temperature gain value.
Adjusts the red color temperature offset.
[-]: Decrease the red color temperature offset value.
[+]: Increase the red color temperature offset value.
[Reset]: Initialize the red color temperature offset value.
Adjusts the green color temperature offset.
[-]: Decrease the green color temperature offset value.
[+]: Increase the green color temperature offset value.
[Reset]: Initialize the green color temperature offset value.
Adjusts the blue color temperature offset.
[-]: Decrease the blue color temperature offset value.
[+]: Increase the blue color temperature offset value.
[Reset]: Initialize the blue color temperature offset value.
© 3M 2012. All Rights Reserved.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
Normal / 4:3 / 16:9 / 16:10 / 14:9
Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Adjusts the display position.
Over Scan
Position
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
TV / Film / Off
Video NR
Switches the noise reduction mode.
High / Mid / Low
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the video format for an input from the HDMI port.
Auto / Video / Computer
Video Format - S-Video
Video Format - Video
HDMI Format
HDMI Range
Changes the digital range for an input from the HDMI port.
Auto / Normal / Enhanced
Computer in - Computer in1
Computer in - Computer in2
Frame Lock - Computer in1
Frame Lock - Computer in2
Frame Lock - HDMI
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the frame lock function on/off of the HDMI port.
On / Off
© 3M 2012. All Rights Reserved.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Turns on/off the auto eco mode.
Auto Eco Mode
On / Off
Eco Mode
Switches the eco mode.
Normal / Eco / Intelligent Eco
Installation
Switches the mode for installation status.
Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling
Switches the standby mode setting.
Standby Mode
Normal / Saving
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - LAN
Monitor Out - USB type A
Monitor Out - USB type B
Monitor Out - HDMI
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the LAN input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE A input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE B input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the HDMI input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
[AUDIO] Tab
Function
Volume
General Description
Adjusts the volume.
[-]: Decrease the volume value.
[+]: Increase the volume value.
Turns on/off the built-in speaker.
On / Off
Speaker
Audio Source - Computer in1 Assigns the audio port when the COMPUTER IN1 input port is selected.
Audio in1 / Audio in2 / Off
Audio Source - Computer in2 Assigns the audio port when the COMPUTER IN2 input port is selected.
Audio in1 / Audio in2 / Off
Audio Source - LAN
Assigns the audio port when the LAN input port is selected.
LAN / Audio in1 / Audio in2 / Off
Audio Source - USB type A
Audio Source - USB type B
Audio Source - HDMI
Audio Source - S-Video
Audio Source - Video
Audio Source - Standby
HDMI Audio
Assigns the audio port when the USB TYPE A input port is selected.
Audio in1 / Audio in2 / Off
Assigns the audio port when the USB TYPE B input port is selected.
USB type B / Audio in1 / Audio in2 / Off
Assigns the audio port when the HDMI input port is selected.
Audio HDMI / Audio in1 / Audio in2 / Off
Assigns the audio port when the S-VIDEO input port is selected.
Audio in1 / Audio in2 / Off
Assigns the audio port when the VIDEO input port is selected.
Audio in1 / Audio in2 / Off
Assigns the audio port in the standby mode.
Audio in1 / Audio in2 / Off
Switches the mode for the HDMI audio.
1 / 2
© 3M 2012. All Rights Reserved.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
[SCREEN] Tab
Function
General Description
Language
Switches the OSD (On Screen Display) language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish
Adjusts the menu position.
Menu Position
[
[
[
[
]: Increase the vertical menu position value.
]: Decrease the vertical menu position value.
]: Decrease the horizontal menu position value.
]: Increase the horizontal menu position value.
Blank
Switches the mode for the blank screen.
MyScreen / Original / Blue / White / Black
Switches the mode for the start-up screen.
MyScreen / Original / Off
Start Up
MyScreen Lock
Message
Turns on/off the MyScreen lock function.
On / Off
Turns on/off the message function.
On / Off
Template
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2
Selects the Closed Caption Display setting.
Auto / On / Off
Selects the Closed Caption Mode setting.
Captions / Text
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
Initialize the selected function.
C.C. - Display
C.C. - Mode
C.C. - Channel
Reset
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
[OPTION] Tab
Function
General Description
Auto Search
Turns on/off the automatic signal search function.
On / Off
Auto Keystone
Direct Power On
Auto Power Off
Turns on/Off the automatic keystone function.
On / Off
Turns on/off the Direct Power On function.
On / Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the auto power off time.
[+]: Increase the auto power off time.
USB type B
My Button-1
Selects the function of USB TYPE B port.
Mouse / USB Display
Assigns the function for the MY BUTTON-1 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /
Template / AV Mute / Resolution / Eco Mode / Other
My Button-2
My Button-Eco
My Source
Assigns the function for the MY BUTTON-2 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /
Template / AV Mute / Resolution / Eco Mode / Other
Assigns the function for the MY BUTTON-Eco button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video / Slideshow /
My Image / Messenger / Information / Auto Keystone / My Memory / Picture Mode / Filter Reset /
Template / AV Mute / Resolution / Eco Mode / Blank / Freeze / Volume / Auto
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
© 3M 2012. All Rights Reserved.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
[OTHER] Tab
Function
Power
General Description
Turns on/off the power.
On / Off
Input Source
Picture Mode
Switches the input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Switches the picture mode.
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Custom
Custom is displayed only. It cannot be set.
Turns on/off the blank.
On / Off
Turns on/off the mute.
On / Off
Blank On/Off
Mute
Freeze
Turns off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the magnify position.
Magnify Position
[
[
[
[
]: Decrease the vertical magnify position value.
]: Increase the vertical magnify position value.
]: Decrease the horizontal magnify position value.
]: Increase the horizontal magnify position value.
Template
Turns on/off the template screen.
On / Off
My Image
Displays the My Image data.
Image-Off / Image-1 / Image-2 / Image-3 / Image-4
My Image Delete
Messenger
Deletes the My Image data.
Image-1 / Image-2 / Image-3 / Image-4
Displays the Messenger.
Message-Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 /
Message-6 / Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12
© 3M 2012. All Rights Reserved.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
■ CL72X / CL73W / CL73X / NE7 / PL93X / WX36i / X31i / X36i / X46i
[STATUS] Tab
Function
Power
General Description
Displays the current power status.
On / Standby / Cool down
Input Source
Error Status
Displays the current Input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /
Filter Error / Other Error
Blank On/Off
Mute
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Freeze
Displays the current freeze status.
Normal / Freeze
Lamp Time
Filter Time
Reset
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
[PICTURE] Tab
Function
General Description
Brightness
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Contrast
Gamma
Color Temp
Color
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Default-7 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Hi-Bright-4 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Tint
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Sharpness
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Active Iris
Changes the active iris control mode.
Presentation / Theater / Off
My Memory
Saves the current adjustment data.
Save-1 / Save-2 / Save-3 / Save-4
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
[Execute]: Performs each function.
Reset
Initialize the selected function.
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
© 3M 2012. All Rights Reserved.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
[Custom - Gamma -]
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
User Gamma Point 1
User Gamma Point 2
User Gamma Point 3
User Gamma Point 4
User Gamma Point 5
User Gamma Point 6
User Gamma Point 7
User Gamma Point 8
Adjusts the gamma point 1.
[-]: Decrease the gamma point 1 value.
[+]: Increase the gamma point 1 value.
[Reset]: Initialize the gamma point 1 value.
Adjusts the gamma point 2.
[-]: Decrease the gamma point 2 value.
[+]: Increase the gamma point 2 value.
[Reset]: Initialize the gamma point 2 value.
Adjusts the gamma point 3.
[-]: Decrease the gamma point 3 value.
[+]: Increase the gamma point 3 value.
[Reset]: Initialize the gamma point 3 value.
Adjusts the gamma point 4.
[-]: Decrease the gamma point 4 value.
[+]: Increase the gamma point 4 value.
[Reset]: Initialize the gamma point 4 value.
Adjusts the gamma point 5.
[-]: Decrease the gamma point 5 value.
[+]: Increase the gamma point 5 value.
[Reset]: Initialize the gamma point 5 value.
Adjusts the gamma point 6.
[-]: Decrease the gamma point 6 value.
[+]: Increase the gamma point 6 value.
[Reset]: Initialize the gamma point 6 value.
Adjusts the gamma point 7.
[-]: Decrease the gamma point 7 value.
[+]: Increase the gamma point 7 value.
[Reset]: Initialize the gamma point 7 value.
Adjusts the gamma point 8.
[-]: Decrease the gamma point 8 value.
[+]: Increase the gamma point 8 value.
[Reset]: Initialize the gamma point 8 value.
[Custom - Color Temp -]
Function
General Description
User Gamma Pattern
Changes the test pattern.
Off / 9 steps Gray scale / 15 steps Gray scale / Ramp
Color Temp Gain R
Color Temp Gain G
Color Temp Gain B
Color Temp Offset R
Color Temp Offset G
Color Temp Offset B
Adjusts the color temperature gain R.
[-]: Decrease the color temp gain R value.
[+]: Increase the color temp gain R value.
[Reset]: Initialize the color temp gain R value.
Adjusts the color temperature gain G.
[-]: Decrease the color temp gain G value.
[+]: Increase the color temp gain G value.
[Reset]: Initialize the color temp gain G value.
Adjusts the color temperature gain B.
[-]: Decrease the color temp gain B value.
[+]: Increase the color temp gain B value.
[Reset]: Initialize the color temp gain B value.
Adjusts the color temperature offset R.
[-]: Decrease the color temp offset R value.
[+]: Increase the color temp offset R value.
[Reset]: Initialize the color temp offset R value.
Adjusts the color temperature offset G.
[-]: Decrease the color temp offset G value.
[+]: Increase the color temp offset G value.
[Reset]: Initialize the color temp offset G value.
Adjusts the color temperature offset B.
[-]: Decrease the color temp offset B value.
[+]: Increase the color temp offset B value.
[Reset]: Initialize the color temp offset B value.
© 3M 2012. All Rights Reserved.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
[IMAGE] Tab
Function
Aspect
General Description
Switches the mode for aspect ratio.
CL72X / CL73X / NE7 / PL93X / X31i / X36i / X46i
Normal / 4:3 / 16:9 / 16:10 / 14:9
CL73W / WX36i
Normal / 4:3 / 16:9 / 16:10 / 14:9 / Native
Over Scan
Position
Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Adjusts the display position.
[
[
[
[
]: Increase the vertical position value.
]: Decrease the vertical position value.
]: Increase the horizontal position value.
]: Decrease the horizontal position value.
H Phase
H Size
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Auto Adjust
Reset
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
[INPUT] Tab
Function
General Description
Progressive
Switches the progress mode.
TV / Film / Off
Video NR
Switches the noise reduction mode.
High / Mid / Low
Color Space
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the video format for an input from the HDMI port.
Auto / Video / Computer
Video Format - S-Video
Video Format - Video
HDMI Format
HDMI Range
Changes the digital range for an input from the HDMI port.
Auto / Normal / Enhanced
Computer in - Computer in1
Computer in - Computer in2
Frame Lock - Computer in1
Frame Lock - Computer in2
Frame Lock - HDMI
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the frame lock function on/off of the HDMI port.
On / Off
© 3M 2012. All Rights Reserved.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
[SETUP] Tab
Function
General Description
Auto Keystone
Keystone V
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Turns on/off the auto eco mode.
Auto Eco Mode
On / Off
Eco Mode
Turns off/on the eco mode.
Normal / Eco / Intelligent Eco / Saver
Installation
Switches the mode for mirror status.
Front/Desktop / Rear/Desktop / Rear/Ceiling / Front/Ceiling
Standby Mode
Switches the standby mode setting.
Normal / Saving
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - LAN
Monitor Out - USB type A
Monitor Out - USB type B
Monitor Out - HDMI
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the LAN input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE A input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE B input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the HDMI input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
[AUDIO] Tab
Function
Volume
General Description
Adjusts the Volume.
[-]: Decrease the volume.
[+]: Increase the volume.
Speaker
Turns on/off the built-in speaker.
On / Off
Audio Source
- Computer in1
Assigns the AUDIO SOURCE when the COMPUTER IN1 input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Audio Source
- Computer in2
Audio Source - LAN
Assigns the AUDIO SOURCE when the COMPUTER IN2 input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE when the LAN input port is selected.
LAN / Audio in1 / Audio in2 / Audio in3 / Off
Audio Source - USB type A
Audio Source - USB type B
Audio Source - HDMI
Audio Source - S-Video
Audio Source - Video
Audio Source - Standby
Mic Level
Assigns the AUDIO SOURCE when the USB TYPE A input port is selected.
USB type A / Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE when the USB TYPE B input port is selected.
USB type B / Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE when the HDMI input port is selected.
HDMI / Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE when the S-VIDEO input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE when the VIDEO input port is selected.
Audio in1 / Audio in2 / Audio in3 / Off
Assigns the AUDIO SOURCE in the standby mode.
Audio in1 / Audio in2 / Audio in3 / Off
Switches the input level to match that of the microphone connected to the MIC port.
High / Low
Mic Volume
Adjusts the volume of the microphone connected to the MIC port.
[-]: Decrease the volume of the microphone.
[+]: Increase the volume of the microphone.
© 3M 2012. All Rights Reserved.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
[SCREEN] Tab
Function
General Description
Language
Switches the OSD language.
English / French / German / Spanish / Italian / Norwegian / Dutch / Portuguese / Japanese /
Simplified Chinese / Traditional Chinese / Korean / Swedish / Russian / Finnish / Polish / Turkish /
Danish / Czech / Hungarian / Romanian / Slovenian / Croatian / Greek / Lithuanian / Estonian /
Latvian / Thai / Arabian / Persian / Portuguese -Brazil
Menu Position
Adjusts the menu position.
[
[
[
[
]: Increase the vertical menu position.
]: Decrease the vertical menu position.
]: Decrease the horizontal menu position.
]: Increase the horizontal menu position.
Blank
Switches the mode for the blank screen.
MyScreen / Original / Blue / White / Black
Switches the mode for the start-up screen.
MyScreen / Original / Off
Start Up
MyScreen Lock
Message
Turns on/off the MyScreen lock function.
On / Off
Turns on/off the message function.
On / Off
Template
Switches the mode for the template screen.
Test Pattern / Dot-Line1 / Dot-Line2 / Dot-Line3 / Dot-Line4 / Circle 1 / Circle 2 / Map 1 / Map 2
Selects the Closed Caption Display setting.
Auto / On / Off
Selects the Closed Caption Mode setting.
Captions / Text
Selects the Closed Caption Channel setting.
1 / 2 / 3 / 4
Initialize the selected function.
C.C. - Display
C.C. - Mode
C.C. - Channel
Reset
Menu Position V / Menu Position H
[Execute]: After the confirmation message, the selected function will be initialized.
[OPTION] Tab
Function
General Description
Auto Search
Turns on/off the automatic signal search function.
On / Off
Auto Keystone
Direct Power On
Auto Power Off
Turns on/Off the automatic keystone function.
On / Off
Turns on/off the Direct Power On function.
On / Off
Adjusts the time to count down to automatically turn the projector off.
[-]: Decrease the Auto Power off time.
[+]: Increase the Auto Power off time.
USB type B
My Button-1
Selects the function of USB TYPE B port.
Mouse / USB Display
Assigns the function for the MY BUTTON-1 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video /
Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode /
Saver Mode / Other
My Button-2
Assigns the function for the MY BUTTON-2 button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video /
Slideshow / My Image / Messenger / Information / Auto Keystone / My Memory / Active Iris /
Picture Mode / Filter Reset / Template / AV Mute / Resolution / Mic Volume / Eco Mode /
Saver Mode / Other
My Source
[Service]
Assigns the input port for the MY SOURCE/DOC.CAMERA button on the included remote control.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Function
General Description
Remote Freq. - Normal
Changes the projector’s remote sensor on/off of the normal frequency.
Enable / Disable
Remote Freq. - High
Changes the projector’s remote sensor on/off of the high frequency.
Enable / Disable
© 3M 2012. All Rights Reserved.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
[OTHER] Tab
Function
Power
General Description
Turns on/off the power.
On / Off
Input Source
Picture Mode
Switches the input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Switches the picture mode.
Normal / Cinema / Dynamic / Board(Black) / Board(Green) / Whiteboard / Daytime / Photo / Custom
Custom is displayed only. It cannot be set.
Turns on/off the blank.
On / Off
Turns on/off the mute.
On / Off
Blank On/Off
Mute
Freeze
Turns off/on the freeze.
Normal / Freeze
Magnify
Adjusts the magnify setting.
[-]: Decrease the magnify value.
[+]: Increase the magnify value.
Adjusts the magnify position.
Magnify Position
[
[
[
[
]: Decrease the vertical magnify position.
]: Increase the vertical magnify position.
]: Decrease the horizontal magnify position.
]: Increase the horizontal magnify position.
Template On/Off
My Image
Turns on/off the template screen.
On / Off
Displays the My Image data.
Off / Image-1 / Image-2 / Image-3 / Image-4
My Image Delete
Messenger
Deletes the My Image data.
Image-1 / Image-2 / Image-3 / Image-4
Displays the Messenger.
Off / Temporary / Message-1 / Message-2 / Message-3 / Message-4 / Message-5 / Message-6 /
Message-7 / Message-8 / Message-9 / Message-10 / Message-11 / Message-12
© 3M 2012. All Rights Reserved.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
3.9 Image Send to Projector
If the projector supports My Image (e-SHOT) feature, you can select My Image (e-SHOT) function. Click [Image
Send] icon, the window [Send Image File to projector(s)] will be appeared.
3.10 MY IMAGE (e-SHOT)
Mark projectors that you will transfer an image.
Select the image file that should be transferred and
stored number. The compatible image file is only
PJ1 format file that can be created by Projector
Image Tool (PJImg). And then, click the Send
button to transfer image.
The progress bar is shown during transfer. The
status will change “OK” if it succeeds.
[Note]
- This feature is only available for CL33X, CL35X,
CL67N, CL69N, CL72X, CL73W, CL73X, CL86X,
NE7, PL90X, PL92X, PL93X, WX36, WX36i, X21i,
X26i, X30N, X31, X31i, X35N, X35NK, X36, X36i,
X46, X46i, X56, X90 and X90K.
- Please verify the port setting on the projector and
the port / authentication setting on the application.
Once you select the image file and store location number, the “Send” button becomes available. The compatible
image file is only PJ1 format file that can be created by Projector Image Tool (PJImg).And then, click the Send
button to transfer image. The maximum size of transferred file is depending on the model. Please check the
following list.
PJ1 format file
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL90X / PL92X / PL93X /
WX36 / WX36i / X21i / X26i / X30N / X31 / X31i / X35N / X35NK / X36 / X36i / X46 / X46i / X56 / X90 / X90K
Less than equal 130,816byte
JPEG file
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL92X / PL93X / WX36 /
WX36i / X21i / X26i / X31 / X31i / X36 / X36i / X46 / X46i / X56
Less than equal 262,144byte
3.11 Software Version
You can check the software version information to click “About” icon, or choose “About Projector Control
Application” on the menu.
© 3M 2012. All Rights Reserved.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
|