Manual Roller MR3
Technical Datasheet
Automotive
Manual Roller MR3
Technical Datasheet
Description:
Manual pressing-system with spring mounted and locked
roll, which becomes unlocked when an adjusted contact
pressure is reached.
A reproducible minimum contact pressure (basic setting
= 78 N/cm²) is ensured by the defined pressure transmission
of the Manual Roller MR3.
Thereby it is possible to pressurize attachment parts
reproducible and process-sure and a sufficient wet-out of the
tape to the substrate can be achieved.
Construction of the Manual Roller MR3
o
o
o
o
o
o
o
Aluminum main part
Additional handle bars
Locking- and unlocking device
Pivoted rubber press roll (Design has to be
specified for every application)
Pressure spring (has to be specified for every
application)
For technical information about this product please contact Klaus Malecki at
J. Schätzmüller
Version 06/2008
Automotive Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
|